main
Ray Publish 0.1.0 2232127
{
  "slug": "tps1hb08aqpwprq1",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Power Distribution Switches, HTSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "tps1hb08aqpwprq1",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps1hb08aqpwprq1.kicad_sym",
    "tps1hb08aqpwprq1.kicad_mod",
    "tps1hb08aqpwprq1.glb",
    "tps1hb08aqpwprq1.step",
    "tps1hb08aqpwprq1.lbr",
    "docs/hero.png",
    "docs/tps1hb08aqpwprq1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps1hb08aqpwprq1-hero.glb",
    "tps1hb08aqpwprq1-hero.overlay.json",
    "tps1hb08aqpwprq1-etched.glb"
  ],
  "component": {
    "mpn": "TPS1HB08AQPWPRQ1",
    "manufacturer": "Texas Instruments",
    "package": "HTSSOP-16",
    "pin_count": 17,
    "category": "Power Management (PMIC)",
    "subcategory": "Power Distribution Switches",
    "datasheet": "https://www.ti.com/lit/ds/symlink/tps1hb08-q1.pdf",
    "parts": {
      "symbol": "tps1hb08aqpwprq1.kicad_sym",
      "footprint": "tps1hb08aqpwprq1.kicad_mod",
      "model_3d": "tps1hb08aqpwprq1-hero.glb",
      "model_3d_plain": "tps1hb08aqpwprq1-etched.glb",
      "model_3d_step": "tps1hb08aqpwprq1-etched.step",
      "model_3d_step_plain": "tps1hb08aqpwprq1.step",
      "lbr": "tps1hb08aqpwprq1.lbr"
    },
    "distributor_links": {
      "lcsc": "C3019223",
      "mouser": "595-TPS1HB08AQPWPRQ1"
    },
    "distributor_check": {
      "checked_at": "2026-11-10T09:40:24Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "deferred",
        "error": "shared DigiKey quota guard: 904 calls left today"
      },
      "mouser": {
        "pn": "595-TPS1HB08AQPWPRQ1",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground; all operating voltages are specified with respect to this pin."
      },
      {
        "number": "2",
        "name": "SNS",
        "type": "output",
        "description": "Analog sense output that carries a current proportional to load current (ISNSI = IOUT / 5000) or device temperature, and goes to ISNSFH on a fault; ground through 1kΩ if unused."
      },
      {
        "number": "3",
        "name": "LATCH",
        "type": "input",
        "description": "Sets fault handling to latched or auto-retry behavior; VIL 0.8 V, VIH 2.0 V, voltage range -1 V to 5.5 V."
      },
      {
        "number": "4",
        "name": "EN",
        "type": "input",
        "description": "Active-high control input for the output switch; VIL 0.8 V, VIH 2.0 V, voltage range -1 V to 5.5 V."
      },
      {
        "number": "5",
        "name": "ILIM",
        "type": "output",
        "description": "Connect a resistor (5 kΩ to 25 kΩ, to VBB) to set the current-limit threshold; floating, grounded or out-of-range defaults to the internal current-limit level."
      },
      {
        "number": "6",
        "name": "VOUT",
        "type": "output",
        "description": "Switched channel output to the load; the internal clamp limits FET voltage during inductive turn-off (VDS clamp 40 V minimum, 46 V typical)."
      },
      {
        "number": "7",
        "name": "VOUT",
        "type": "output",
        "description": "Switched channel output to the load; the internal clamp limits FET voltage during inductive turn-off (VDS clamp 40 V minimum, 46 V typical)."
      },
      {
        "number": "8",
        "name": "VOUT",
        "type": "output",
        "description": "Switched channel output to the load; the internal clamp limits FET voltage during inductive turn-off (VDS clamp 40 V minimum, 46 V typical)."
      },
      {
        "number": "9",
        "name": "VOUT",
        "type": "output",
        "description": "Switched channel output to the load; the internal clamp limits FET voltage during inductive turn-off (VDS clamp 40 V minimum, 46 V typical)."
      },
      {
        "number": "10",
        "name": "VOUT",
        "type": "output",
        "description": "Switched channel output to the load; the internal clamp limits FET voltage during inductive turn-off (VDS clamp 40 V minimum, 46 V typical)."
      },
      {
        "number": "11",
        "name": "VOUT",
        "type": "output",
        "description": "Switched channel output to the load; the internal clamp limits FET voltage during inductive turn-off (VDS clamp 40 V minimum, 46 V typical)."
      },
      {
        "number": "12",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect; leave floating."
      },
      {
        "number": "13",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect; leave floating."
      },
      {
        "number": "14",
        "name": "SEL1",
        "type": "input",
        "description": "Diagnostics select: selects load-current sense (low) or device-temperature sense (high); VIL 0.8 V, VIH 2.0 V; if unused, ground through RPROT to enable reverse-battery turn-on."
      },
      {
        "number": "15",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect; leave floating."
      },
      {
        "number": "16",
        "name": "DIA_EN",
        "type": "input",
        "description": "Diagnostic enable, active high; VIL 0.8 V, VIH 2.0 V, voltage range -1 V to 5.5 V; when not used, the analog sense, open-load and short-to-battery diagnostics are unavailable."
      },
      {
        "number": "17",
        "name": "VBB",
        "type": "power_in",
        "description": "Power supply input; nominal operating range 6 V to 18 V, absolute maximum continuous supply 36 V, load dump 40 V. Listed as the Exposed Pad in the pin table; the pad number 17 is taken from the land-pattern drawing."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The pin table lists VBB on the 'Exposed pad' rather than a printed number. The number 17 is inferred; Pin 5 is ILIM for Version A (the MPN's version). The datasheet types ILIM as 'O' (output), although ; Datasheet types NC pins as 'I', but they are no-connect pins to be left floating; mapped to KiCad 'u",
          "2/17 pins cited to the wrong page (name found elsewhere): ['5:ILIM@p22', '10:VOUT@p7']"
        ],
        "pages_sent": 54,
        "cost_usd": 0.2029,
        "at": "2026-11-10T09:40:12"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/tps1hb08-q1.pdf",
        "pages": 54,
        "sha256": "8f2664df02ed6b2e",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 17,
        "described": 17,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps1hb08aqpwprq1.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "7982746831c0bd23f4690608869ad67776faae5c762fb0376666126a3998921b",
        "checked": "2026-11-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps1hb08aqpwprq1-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "75bfec828385412bb35be89fbca837cdb304976d7964c7ee7c7c73b5ef7586f0",
        "checked": "2026-11-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "PWP",
      "source_page": 51,
      "D": {
        "nom_mm": 5.0,
        "range_mm": [
          4.9,
          5.1
        ]
      },
      "E1": {
        "nom_mm": 4.4,
        "range_mm": [
          4.3,
          4.5
        ]
      },
      "E": {
        "nom_mm": 6.4,
        "range_mm": [
          6.2,
          6.6
        ]
      },
      "e": {
        "nom_mm": 0.65,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.2,
        "range_mm": [
          null,
          1.2
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "tps1hb08aqpwprq1.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}