← Commit history
README.mdadded+52@@ -0,0 +1,52 @@+# TPS1H100AQPWPRQ1++**Texas Instruments** · Power Distribution Switches · HTSSOP-14++TPS1H100AQPWPRQ1 from Texas Instruments, in a HTSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | NC | unconnected | No-connect pin; leave floating. |+| 2 | GND | power_in | Ground pin. |+| 3 | IN | input | Input control for channel activation, compatible with 3.3V and 5V logic levels. |+| 4 | NC | unconnected | No-connect pin; leave floating. |+| 5 | OUT | output | Output connected to load (NMOS source). |+| 6 | OUT | output | Output connected to load (NMOS source). |+| 7 | OUT | output | Output connected to load (NMOS source). |+| 8 | VS | power_in | Power supply (battery voltage); operating range 3.5V to 40V. |+| 9 | VS | power_in | Power supply (battery voltage); operating range 3.5V to 40V. |+| 10 | VS | power_in | Power supply (battery voltage); operating range 3.5V to 40V. |+| 11 | NC | unconnected | No-connect pin; leave floating. |+| 12 | DIAG_EN | input | Enable and disable pin for diagnostic functions; connect to device GND if not used. |+| 13 | CL | output | Programmable current-limit pin; connect external resistor to set current limit or connect to device GND if external current limit is not used. |+| 14 | ST | tri_state | Open-drain diagnostic status output; pulls to GND on fault condition, leave floating if not used (Version A only). |+| 15 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | HTSSOP-14 |+| Category | Power Management (PMIC) |+| Pins | 15 |++## CAD (KiCad official)++- Symbol: `TPS1H100AQPWPRQ1`+- Footprint: `Package_SO:TSSOP-14-1EP_4.4x5mm_P0.65mm`+- 3D model: HTSSOP-14 (KiCad packages3D, STEP)+- 3D model files: `tps1h100aqpwprq1-etched.step` / `tps1h100aqpwprq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps1h100aqpwprq1.step` / `tps1h100aqpwprq1.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps1h100-q1) (47 pp, sha256 `a9b8a4db6461c7ff`, retrieved 2026-09-22, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps1h100aqpwprq1-datasheet.pdf)
page.jsonadded+185@@ -0,0 +1,185 @@+{+ "slug": "tps1h100aqpwprq1",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Power Distribution Switches, HTSSOP-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "tps1h100aqpwprq1",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tps1h100aqpwprq1.kicad_sym",+ "tps1h100aqpwprq1.kicad_mod",+ "tps1h100aqpwprq1.glb",+ "tps1h100aqpwprq1.step",+ "tps1h100aqpwprq1.lbr",+ "docs/hero.png",+ "docs/tps1h100aqpwprq1-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "TPS1H100AQPWPRQ1",+ "manufacturer": "Texas Instruments",+ "package": "HTSSOP-14",+ "pin_count": 15,+ "category": "Power Management (PMIC)",+ "subcategory": "Power Distribution Switches",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tps1h100-q1",+ "parts": {+ "symbol": "tps1h100aqpwprq1.kicad_sym",+ "footprint": "tps1h100aqpwprq1.kicad_mod",+ "model_3d": "tps1h100aqpwprq1-etched.glb",+ "model_3d_plain": "tps1h100aqpwprq1.glb",+ "model_3d_step": "tps1h100aqpwprq1-etched.step",+ "model_3d_step_plain": "tps1h100aqpwprq1.step",+ "lbr": "tps1h100aqpwprq1.lbr"+ },+ "distributor_links": {+ "lcsc": "C478465"+ },+ "pins": [+ {+ "number": "1",+ "name": "NC",+ "type": "unconnected",+ "description": "No-connect pin; leave floating."+ },+ {+ "number": "2",+ "name": "GND",+ "type": "power_in",+ "description": "Ground pin."+ },+ {+ "number": "3",+ "name": "IN",+ "type": "input",+ "description": "Input control for channel activation, compatible with 3.3V and 5V logic levels."+ },+ {+ "number": "4",+ "name": "NC",+ "type": "unconnected",+ "description": "No-connect pin; leave floating."+ },+ {+ "number": "5",+ "name": "OUT",+ "type": "output",+ "description": "Output connected to load (NMOS source)."+ },+ {+ "number": "6",+ "name": "OUT",+ "type": "output",+ "description": "Output connected to load (NMOS source)."+ },+ {+ "number": "7",+ "name": "OUT",+ "type": "output",+ "description": "Output connected to load (NMOS source)."+ },+ {+ "number": "8",+ "name": "VS",+ "type": "power_in",+ "description": "Power supply (battery voltage); operating range 3.5V to 40V."+ },+ {+ "number": "9",+ "name": "VS",+ "type": "power_in",+ "description": "Power supply (battery voltage); operating range 3.5V to 40V."+ },+ {+ "number": "10",+ "name": "VS",+ "type": "power_in",+ "description": "Power supply (battery voltage); operating range 3.5V to 40V."+ },+ {+ "number": "11",+ "name": "NC",+ "type": "unconnected",+ "description": "No-connect pin; leave floating."+ },+ {+ "number": "12",+ "name": "DIAG_EN",+ "type": "input",+ "description": "Enable and disable pin for diagnostic functions; connect to device GND if not used."+ },+ {+ "number": "13",+ "name": "CL",+ "type": "output",+ "description": "Programmable current-limit pin; connect external resistor to set current limit or connect to device GND if external current limit is not used."+ },+ {+ "number": "14",+ "name": "ST",+ "type": "tri_state",+ "description": "Open-drain diagnostic status output; pulls to GND on fault condition, leave floating if not used (Version A only)."+ },+ {+ "number": "15",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "exposed pad 15 added from the footprint"+ ],+ "pages_sent": 47,+ "cost_usd": 0.3696,+ "at": "2026-09-22T21:27:10"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tps1h100-q1",+ "pages": 47,+ "sha256": "a9b8a4db6461c7ff",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 15,+ "described": 15,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}