component
TPS1H100AQPWPRQ1
Public Made by Adomby adom
Texas Instruments Power Distribution Switches, HTSSOP-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS1H100AQPWPRQ1
Texas Instruments · Power Distribution Switches · HTSSOP-14
TPS1H100AQPWPRQ1 from Texas Instruments, in a HTSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No-connect pin; leave floating. |
| 2 | GND | power_in | Ground pin. |
| 3 | IN | input | Input control for channel activation, compatible with 3.3V and 5V logic levels. |
| 4 | NC | unconnected | No-connect pin; leave floating. |
| 5 | OUT | output | Output connected to load (NMOS source). |
| 6 | OUT | output | Output connected to load (NMOS source). |
| 7 | OUT | output | Output connected to load (NMOS source). |
| 8 | VS | power_in | Power supply (battery voltage); operating range 3.5V to 40V. |
| 9 | VS | power_in | Power supply (battery voltage); operating range 3.5V to 40V. |
| 10 | VS | power_in | Power supply (battery voltage); operating range 3.5V to 40V. |
| 11 | NC | unconnected | No-connect pin; leave floating. |
| 12 | DIAG_EN | input | Enable and disable pin for diagnostic functions; connect to device GND if not used. |
| 13 | CL | output | Programmable current-limit pin; connect external resistor to set current limit or connect to device GND if external current limit is not used. |
| 14 | ST | tri_state | Open-drain diagnostic status output; pulls to GND on fault condition, leave floating if not used (Version A only). |
| 15 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HTSSOP-14 |
| Category | Power Management (PMIC) |
| Pins | 15 |
CAD (KiCad official)
- Symbol:
TPS1H100AQPWPRQ1 - Footprint:
Package_SO:TSSOP-14-1EP_4.4x5mm_P0.65mm - 3D model: HTSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
tps1h100aqpwprq1-etched.step/tps1h100aqpwprq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps1h100aqpwprq1.step/tps1h100aqpwprq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (47 pp, sha256
a9b8a4db6461c7ff, retrieved 2026-09-22, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).