← Commit history

Initial commit: component/tps16630rger

Ray ·f6d037c719 ·
2 files changed +308
README.mdadded+62
@@ -0,0 +1,62 @@+# TPS16630RGER++**Texas Instruments** · Surge Protection Devices (SPDs) · VQFN-24(4x4)++TPS16630RGER from Texas Instruments, in a VQFN-24(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | IN | power_in | Power supply input connection to drain of internal FET. |+| 2 | IN | power_in | Power supply input connection to drain of internal FET. |+| 3 | N.C. | unconnected | No connection. |+| 4 | N.C. | unconnected | No connection. |+| 5 | P_IN | power_in | Device power supply voltage; always connect P_IN directly to IN. |+| 6 | UVLO | input | Input to set programmable under-voltage lock-out threshold; under-voltage event disables FET and activates FLT. |+| 7 | OVP | input | Input to set adjustable over-voltage protection threshold (TPS16630 only); over-voltage disables FET and activates FLT. |+| 8 | GND | power_in | Connect GND to system ground plane. |+| 9 | dVdT | bidirectional | Capacitor to GND sets output voltage slew rate; leaving open enables thermal regulation mode for fast output charging. |+| 10 | ILIM | bidirectional | Resistor to GND sets overload current limit from 0.6A to 6A. |+| 11 | MODE | input | Mode selection pin for overload fault response: open = latch mode, shorted to GND = auto-retry mode. |+| 12 | SHDN | input | Shutdown input; pull below 0.8V for low-power shutdown; cycling above 2V resets latched faults. |+| 13 | IMON | output | Analog current monitor output providing proportional current to load; resistor to GND converts to proportional voltage. |+| 14 | FLT | tri_state | Fault event indicator, open-drain output; low during fault (UVLO, OVP, overload, thermal shutdown); keep open or tie to GND if unused. |+| 15 | N.C. | unconnected | No connection. |+| 16 | PGOOD | tri_state | Power good indicator, open-drain output, active high; goes low when FET disabled during fault or when SHDN pulled low. |+| 17 | OUT | power_out | Power output of device; connect to load. |+| 18 | OUT | power_out | Power output of device; connect to load. |+| 19 | N.C. | unconnected | No connection. |+| 20 | N.C. | unconnected | No connection. |+| 21 | N.C. | unconnected | No connection. |+| 22 | N.C. | unconnected | No connection. |+| 23 | N.C. | unconnected | No connection. |+| 24 | N.C. | unconnected | No connection. |+| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VQFN-24(4x4) |+| Category | Circuit Protection |+| Pins | 25 |++## CAD (KiCad official)++- Symbol: `TPS16630RGER`+- Footprint: `Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm`+- 3D model: VQFN-24(4x4) (KiCad packages3D, STEP)+- 3D model files: `tps16630rger-etched.step` / `tps16630rger-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps16630rger.step` / `tps16630rger.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps1663) (46 pp, sha256 `ef1077e8989a204c`, retrieved 2026-09-22, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps16630rger-datasheet.pdf)
page.jsonadded+246
@@ -0,0 +1,246 @@+{+  "slug": "tps16630rger",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Surge Protection Devices (SPDs), VQFN-24(4x4). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "circuit protection",+    "tps16630rger",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tps16630rger.kicad_sym",+    "tps16630rger.kicad_mod",+    "tps16630rger.glb",+    "tps16630rger.step",+    "tps16630rger.lbr",+    "docs/hero.png",+    "docs/tps16630rger-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "TPS16630RGER",+    "manufacturer": "Texas Instruments",+    "package": "VQFN-24(4x4)",+    "pin_count": 25,+    "category": "Circuit Protection",+    "subcategory": "Surge Protection Devices (SPDs)",+    "datasheet": "https://www.ti.com/cn/lit/gpn/tps1663",+    "parts": {+      "symbol": "tps16630rger.kicad_sym",+      "footprint": "tps16630rger.kicad_mod",+      "model_3d": "tps16630rger-etched.glb",+      "model_3d_plain": "tps16630rger.glb",+      "model_3d_step": "tps16630rger-etched.step",+      "model_3d_step_plain": "tps16630rger.step",+      "lbr": "tps16630rger.lbr"+    },+    "distributor_links": {+      "lcsc": "C1850279"+    },+    "pins": [+      {+        "number": "1",+        "name": "IN",+        "type": "power_in",+        "description": "Power supply input connection to drain of internal FET."+      },+      {+        "number": "2",+        "name": "IN",+        "type": "power_in",+        "description": "Power supply input connection to drain of internal FET."+      },+      {+        "number": "3",+        "name": "N.C.",+        "type": "unconnected",+        "description": "No connection."+      },+      {+        "number": "4",+        "name": "N.C.",+        "type": "unconnected",+        "description": "No connection."+      },+      {+        "number": "5",+        "name": "P_IN",+        "type": "power_in",+        "description": "Device power supply voltage; always connect P_IN directly to IN."+      },+      {+        "number": "6",+        "name": "UVLO",+        "type": "input",+        "description": "Input to set programmable under-voltage lock-out threshold; under-voltage event disables FET and activates FLT."+      },+      {+        "number": "7",+        "name": "OVP",+        "type": "input",+        "description": "Input to set adjustable over-voltage protection threshold (TPS16630 only); over-voltage disables FET and activates FLT."+      },+      {+        "number": "8",+        "name": "GND",+        "type": "power_in",+        "description": "Connect GND to system ground plane."+      },+      {+        "number": "9",+        "name": "dVdT",+        "type": "bidirectional",+        "description": "Capacitor to GND sets output voltage slew rate; leaving open enables thermal regulation mode for fast output charging."+      },+      {+        "number": "10",+        "name": "ILIM",+        "type": "bidirectional",+        "description": "Resistor to GND sets overload current limit from 0.6A to 6A."+      },+      {+        "number": "11",+        "name": "MODE",+        "type": "input",+        "description": "Mode selection pin for overload fault response: open = latch mode, shorted to GND = auto-retry mode."+      },+      {+        "number": "12",+        "name": "SHDN",+        "type": "input",+        "description": "Shutdown input; pull below 0.8V for low-power shutdown; cycling above 2V resets latched faults."+      },+      {+        "number": "13",+        "name": "IMON",+        "type": "output",+        "description": "Analog current monitor output providing proportional current to load; resistor to GND converts to proportional voltage."+      },+      {+        "number": "14",+        "name": "FLT",+        "type": "tri_state",+        "description": "Fault event indicator, open-drain output; low during fault (UVLO, OVP, overload, thermal shutdown); keep open or tie to GND if unused."+      },+      {+        "number": "15",+        "name": "N.C.",+        "type": "unconnected",+        "description": "No connection."+      },+      {+        "number": "16",+        "name": "PGOOD",+        "type": "tri_state",+        "description": "Power good indicator, open-drain output, active high; goes low when FET disabled during fault or when SHDN pulled low."+      },+      {+        "number": "17",+        "name": "OUT",+        "type": "power_out",+        "description": "Power output of device; connect to load."+      },+      {+        "number": "18",+        "name": "OUT",+        "type": "power_out",+        "description": "Power output of device; connect to load."+      },+      {+        "number": "19",+        "name": "N.C.",+        "type": "unconnected",+        "description": "No connection."+      },+      {+        "number": "20",+        "name": "N.C.",+        "type": "unconnected",+        "description": "No connection."+      },+      {+        "number": "21",+        "name": "N.C.",+        "type": "unconnected",+        "description": "No connection."+      },+      {+        "number": "22",+        "name": "N.C.",+        "type": "unconnected",+        "description": "No connection."+      },+      {+        "number": "23",+        "name": "N.C.",+        "type": "unconnected",+        "description": "No connection."+      },+      {+        "number": "24",+        "name": "N.C.",+        "type": "unconnected",+        "description": "No connection."+      },+      {+        "number": "25",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: PowerPAD thermal pad not included in numbered pins 1-24; datasheet page 6 specifies PowerPAD must co",+          "exposed pad 25 added from the footprint"+        ],+        "pages_sent": 46,+        "cost_usd": 0.5381,+        "at": "2026-09-22T03:59:15"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/tps1663",+        "pages": 46,+        "sha256": "ef1077e8989a204c",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 25,+        "described": 25,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file