TPS16630PWPR

{
  "schema_version": 1,
  "type": "component",
  "slug": "tps16630pwpr",
  "title": "TPS16630PWPR",
  "brief": "Texas Instruments Surge Protection Devices (SPDs), HTSSOP-20. Pinout reviewed by a person against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "circuit protection",
    "tps16630pwpr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "TPS16630PWPR",
    "manufacturer": "Texas Instruments",
    "package": "HTSSOP-20",
    "pin_count": 20,
    "category": "Circuit Protection",
    "subcategory": "Surge Protection Devices (SPDs)",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps1663",
    "parts": {
      "symbol": "tps16630pwpr.kicad_sym",
      "footprint": "tps16630pwpr.kicad_mod",
      "model_3d": "tps16630pwpr-etched.glb",
      "model_3d_plain": "tps16630pwpr.glb",
      "model_3d_step": "tps16630pwpr-etched.step",
      "model_3d_step_plain": "tps16630pwpr.step",
      "lbr": "tps16630pwpr.lbr"
    },
    "distributor_links": {
      "lcsc": "C1849461",
      "digikey": "296-TPS16630PWPRTR-ND",
      "mouser": "595-TPS16630PWPR"
    },
    "distributor_check": {
      "checked_at": "2026-10-01T17:31:08Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-TPS16630PWPRTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-TPS16630PWPR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "IN",
        "type": "power_in",
        "description": "Power supply input connected to the drain of the internal FET."
      },
      {
        "number": "2",
        "name": "IN",
        "type": "power_in",
        "description": "Power supply input connected to the drain of the internal FET."
      },
      {
        "number": "3",
        "name": "IN",
        "type": "power_in",
        "description": "Power supply input connected to the drain of the internal FET."
      },
      {
        "number": "4",
        "name": "N.C",
        "type": "unconnected",
        "description": "No connection."
      },
      {
        "number": "5",
        "name": "N.C",
        "type": "unconnected",
        "description": "No connection."
      },
      {
        "number": "6",
        "name": "P_IN",
        "type": "power_in",
        "description": "Device power supply voltage; always connect P_IN directly to IN."
      },
      {
        "number": "7",
        "name": "UVLO",
        "type": "input",
        "description": "Programmable undervoltage lockout input; undervoltage event shuts down internal FET and asserts FLT to indicate power fault."
      },
      {
        "number": "8",
        "name": "OVP",
        "type": "input",
        "description": "Adjustable overvoltage protection threshold input (TPS16630 only); overvoltage event shuts down internal FET and asserts FLT to indicate overvoltage fault."
      },
      {
        "number": "9",
        "name": "GND",
        "type": "power_in",
        "description": "Ground connection to system ground."
      },
      {
        "number": "10",
        "name": "dVdT",
        "type": "bidirectional",
        "description": "Output voltage slew rate control; capacitor to GND sets slew rate; leave floating for maximum slew rate enabling thermal regulation during power-up."
      },
      {
        "number": "11",
        "name": "ILIM",
        "type": "bidirectional",
        "description": "Current limit programming input; resistor to GND sets overload current limit from 0.6 A to 6 A with ±7% accuracy."
      },
      {
        "number": "12",
        "name": "MODE",
        "type": "input",
        "description": "Mode selection pin for overload fault response; open circuit for latch mode, shorted to GND for auto-retry mode."
      },
      {
        "number": "13",
        "name": "SHDN",
        "type": "input",
        "description": "Shutdown control input; pull below 0.8 V for low-power shutdown, above 2 V for enable; cycling resets latched faults."
      },
      {
        "number": "14",
        "name": "IMON",
        "type": "output",
        "description": "Analog current monitor output with ±6% accuracy proportional to output current; resistor to GND converts current to voltage with 27.9 µA/A gain."
      },
      {
        "number": "15",
        "name": "FLT",
        "type": "output",
        "description": "Fault indicator open-drain output (active-low); asserted on undervoltage, overvoltage, overcurrent, power limit, or thermal fault conditions."
      },
      {
        "number": "16",
        "name": "PGOOD",
        "type": "output",
        "description": "Power good indicator open-drain output (active-high); high when internal FET is enhanced, low when off or SHDN pulled low."
      },
      {
        "number": "17",
        "name": "N.C",
        "type": "unconnected",
        "description": "No connection."
      },
      {
        "number": "18",
        "name": "OUT",
        "type": "power_out",
        "description": "Power output from internal FET source with 31 mΩ on-resistance rating; rated for 6 A maximum load current."
      },
      {
        "number": "19",
        "name": "OUT",
        "type": "power_out",
        "description": "Power output from internal FET source with 31 mΩ on-resistance rating; rated for 6 A maximum load current."
      },
      {
        "number": "20",
        "name": "OUT",
        "type": "power_out",
        "description": "Power output from internal FET source with 31 mΩ on-resistance rating; rated for 6 A maximum load current."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps1663",
        "pages": 46,
        "sha256": "ef1077e8989a204c",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 20,
        "described": 20,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    }
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "HTSSOP-20",
      "Category": "Circuit Protection",
      "Pins": "21"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "tps16630pwpr"
  ],
  "discovery_pitch": "TPS16630PWPR (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps16630pwpr.kicad_sym",
    "tps16630pwpr.kicad_mod",
    "tps16630pwpr.glb",
    "tps16630pwpr.step",
    "tps16630pwpr.lbr",
    "docs/hero.png",
    "docs/tps16630pwpr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  }
}