Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPP363080-T6TR

3PEAK · DC-DC Converters · TSOT-23-6

TPP363080-T6TR from 3PEAK, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground pin for the power and controller circuits; use a star connection to the GND pin with good contact.
2 SW output Switching node between the high-side and low-side FETs; SW voltage is rated -0.3 V to VIN + 0.3 V (42 V max VIN), with transients to -5 V for 20 ns.
3 VIN power_in Supply input, 4.5 V to 36 V; connect decoupling of 2x10 µF and 1x0.1 µF capacitors between VIN and GND.
4 VFB input Voltage feedback input; connect to the output voltage through a feedback resistor divider (0.6 V reference, FB absolute max 6 V).
5 EN input Active-high enable input with an internal weak pull-up; EN absolute maximum is 42 V.
6 VBST input High-side MOSFET gate supply pin; connect 0.1 µF between VBST and SW (VBST-SW bootstrap voltage absolute max 6 V).

Key specifications

Parameter Value
Manufacturer 3PEAK
Package TSOT-23-6
Category Power Management (PMIC)
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VIN Supply Voltage Range VIN 4.5 36 V 7
UVLO Rising Threshold VUVLO_rising 3.9 4.2 4.4 V 7
UVLO Falling Threshold VUVLO_falling 3.7 3.8 4.1 V 7
EN Input Rising Threshold VENH 1.28 1.35 V 7
EN Input Falling Threshold VENL 1 1.17 V 7
EN Current, EN = L IEN_L 0.65 1.04 1.5 μA VEN = 0.9 V 7
EN Current, EN = H IEN_H 3.6 4.3 5.2 μA VEN = 1.5 V 7
VFB Feedback Voltage VFB 588 600 612 mV 7
Switching Frequency, TPP363080/2 (400 kHz variant) fSW 350 400 450 kHz 7
Soft Start Transition Time tss_done 14 18 24 ms 7
High-side Current Limit ILimit_HS 4 4.9 5.6 A Inductor peak current 7
Low-side Current Limit ILimit_LS 2.9 3.7 4.8 A Inductor valley current 7
Negative Low-side Current Limit ILimit_LS_neg 0.68 1 1.94 A 7
VIN Supply Voltage VIN -0.3 42 V 5
SW Switching Node Voltage VSW -0.3 V 5
SW Switching Node Voltage, 20ns VSW -5 42 V 20 ns 5
SW Switching Node Voltage, 50ns VSW -3 42 V 50 ns 5
Bootstrap Voltage VBST-SW -0.3 6 V 5
FB Feedback Voltage VFB -0.3 6 V 5
EN Enable Input VEN -0.3 42 V 5
Maximum Junction Temperature TJ 150 °C 5
Operating Temperature Range TA -40 125 °C 5
Storage Temperature Range TSTG -65 150 °C 5
Lead Temperature (Soldering 10 sec) TL 260 °C 10 sec soldering 5
VIN Supply Voltage VIN 4.5 36 V 6
Enable Input Voltage VEN 0 36 V 6
Feedback Input Voltage VFB 0 5.5 V 6
Bootstrap Voltage VBST-VSW 0 5.5 V 6
Switching Node Voltage VSW 0 V 6
Operating Junction Temperature TJ -40 150 °C 6
Junction-to-ambient thermal resistance, TSOT23-6 θJA 99.6 °C/W 6
Junction-to-board thermal resistance, TSOT23-6 θJB 15.53 °C/W 6
Junction-to-case (top) thermal resistance, TSOT23-6 θJC 44.7 °C/W 6

CAD (KiCad official)

  • Symbol: TPP363080-T6TR
  • Footprint: Package_TO_SOT_SMD:TSOT-23-6
  • 3D model: TSOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: tpp363080-t6tr-etched.step / tpp363080-t6tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tpp363080-t6tr.step / tpp363080-t6tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: 3PEAK datasheet (26 pp, sha256 0a1f76bee181e4fa, retrieved 2026-10-15, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF