3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownTPL740F25-5TR
3PEAK · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
TPL740F25-5TR from 3PEAK, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | The input voltage pin; bypass IN to GND with a 1-μF or greater capacitor (input range 2.4 V to 5.5 V). |
| 2 | GND | power_in | The ground reference pin; connect the GND pin to the PCB ground plane directly. |
| 3 | EN | input | The regulator enable pin; drive EN high (1.2 V to VIN) to turn on the regulator and low (0 to 0.4 V) to turn it off, or connect EN to IN for automatic startup. |
| 4 | NC | unconnected | Not connected on the fixed-voltage versions; pin 4 is the FB feedback pin only on the adjustable (TPL740ADJ) version. |
| 5 | OUT | power_out | The regulated output voltage pin; bypass OUT to GND with a 2.2-μF or greater capacitor (COUT range 2.2 μF to 10 μF). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | 3PEAK |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage Range | VIN | 2.4 | 5.5 | V | 8 | ||
| Input Voltage | VIN | 2.4 | 5.5 | V | 6 | ||
| Enable Voltage | VEN | 0 | V | Maximum printed as VIN | 6 | ||
| Output Voltage | VOUT | 0 | 5 | V | 6 | ||
| Output Current | IOUT | 0 | 500 | mA | 6 | ||
| Output Capacitor | COUT | 2.2 | 10 | µF | 6 | ||
| Operating Junction Temperature Range | TJ | -40 | 125 | °C | 6 | ||
| Input Voltage (absolute maximum) | VIN, VEN | -0.3 | 6 | V | With respect to GND | 6 | |
| Output Voltage (absolute maximum) | VOUT | -0.3 | 6 | V | With respect to GND | 6 | |
| Maximum Junction Temperature | TJ | -40 | 150 | °C | 6 | ||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 6 | ||
| Lead Temperature (Soldering) | TL | 260 | °C | Soldering, 10 sec | 6 | ||
| Ground Pin Current | IGND | 49 | 200 | µA | IOUT = 0 mA | 8 | |
| Ground Pin Current | IGND | 200 | 2000 | µA | IOUT = 100 mA | 8 | |
| Shutdown Current | ISHDN | 0.02 | 2 | nA | EN = GND | 8 | |
| VIN Under-Voltage Lock-out (rising) | UVLO | 1.5 | 1.9 | 2.4 | V | VIN Rising | 8 |
| EN Logic-Input High Level (Enable) | VIH (EN) | 1.2 | V | Maximum printed as VIN | 8 | ||
| EN Logic-Input Low Level (Disable) | VIL (EN) | 0 | 0.4 | V | 8 | ||
| EN Pin Leakage Current | IEN | 1 | 3 | µA | EN = 5 V | 8 | |
| Output Voltage Accuracy | VOUT | -1 | 1 | % | TJ = +25°C | 8 | |
| Output Voltage Accuracy | VOUT | -2 | 2 | % | −40°C ≤ TJ ≤ +125°C | 8 | |
| Line Regulation | ΔVOUT | 1 | 5 | mV | VIN = 2.4 V or VOUT (NOM) + 0.5 V to 5.5 V, or VIN ≥2.4 V, IOUT = 1 mA | 8 | |
| Load Regulation | 20 | 60 | mV | IOUT = 1 mA to 500 mA | 8 | ||
| Dropout Voltage | VDO | 75 | 100 | mV | VIN = 0.98 × VOUT (NOM), IOUT = 100 mA | 8 | |
| Dropout Voltage | VDO | 200 | 250 | mV | VIN = 0.98 × VOUT (NOM), IOUT = 300 mA | 8 | |
| Dropout Voltage | VDO | 300 | 400 | mV | VIN = 0.98 × VOUT (NOM), IOUT = 500 mA | 8 | |
| Output Current | IOUT | 0 | 500 | mA | VOUT in Regulation | 8 | |
| Output Current Limit | ICL | 550 | 1000 | 1400 | mA | VOUT = 0.9 × VOUT (NOM) | 8 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | capacitor connection, the IN pin, and the GND pin of the system must be as small as possible. • It is recommended to use wide trace lengths or thick copper weight to minimize I×R drop and heat dissipa | 16 |
CAD (KiCad official)
- Symbol:
TPL740F25-5TR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
tpl740f25-5tr-etched.step/tpl740f25-5tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tpl740f25-5tr.step/tpl740f25-5tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: 3PEAK datasheet (24 pp, sha256
c385a061b25d4f79, retrieved 2026-11-07, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).