TPL5100DGSR

{
  "slug": "tpl5100dgsr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Timers / Counters, MSOP-10. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "clock-timing",
    "tpl5100dgsr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tpl5100dgsr.kicad_sym",
    "tpl5100dgsr.kicad_mod",
    "tpl5100dgsr.glb",
    "tpl5100dgsr.step",
    "tpl5100dgsr.lbr",
    "docs/hero.png",
    "docs/tpl5100dgsr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tpl5100dgsr-hero.glb",
    "tpl5100dgsr-hero.overlay.json"
  ],
  "component": {
    "mpn": "TPL5100DGSR",
    "manufacturer": "Texas Instruments",
    "package": "MSOP-10",
    "pin_count": 10,
    "category": "Clock/Timing",
    "subcategory": "Timers / Counters",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tpl5100",
    "parts": {
      "symbol": "tpl5100dgsr.kicad_sym",
      "footprint": "tpl5100dgsr.kicad_mod",
      "model_3d": "tpl5100dgsr-hero.glb",
      "model_3d_plain": "tpl5100dgsr.glb",
      "model_3d_step": "tpl5100dgsr-etched.step",
      "model_3d_step_plain": "tpl5100dgsr.step",
      "lbr": "tpl5100dgsr.lbr"
    },
    "distributor_links": {
      "lcsc": "C1847953",
      "digikey": "296-TPL5100DGSRTR-ND",
      "mouser": "595-TPL5100DGSR"
    },
    "distributor_check": {
      "checked_at": "2026-10-10T23:31:07Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-TPL5100DGSRTR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TPL5100DGSR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "D0",
        "type": "input",
        "description": "Logic input that sets the timer delay period (tDP) together with D1 and D2; connect to GND for logic low or to VDD for logic high."
      },
      {
        "number": "2",
        "name": "D1",
        "type": "input",
        "description": "Logic input that sets the timer delay period (tDP) together with D0 and D2; connect to GND for logic low or to VDD for logic high."
      },
      {
        "number": "3",
        "name": "D2",
        "type": "input",
        "description": "Logic input that sets the timer delay period (tDP) together with D0 and D1; connect to GND for logic low or to VDD for logic high."
      },
      {
        "number": "4",
        "name": "VDD",
        "type": "power_in",
        "description": "Supply voltage pin, with recommended operating supply range of 1.8 V to 5.0 V (VDD-GND) and absolute maximum of -0.3 V to 6 V."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference pin for the device; all voltages are referenced to this pin."
      },
      {
        "number": "6",
        "name": "DONE",
        "type": "input",
        "description": "Logic input for the watchdog function; a DONE pulse must be at least 100 ns wide and must arrive before the end of the MOS_DRV pulse, with VIH of 0.7xVDD and VIL of 0.3xVDD."
      },
      {
        "number": "7",
        "name": "TCAL",
        "type": "output",
        "description": "Short calibration output pulse, nominally 15.625 ms (range 14.063 ms to 17.188 ms), used to estimate the actual timer delay period."
      },
      {
        "number": "8",
        "name": "MOS_DRV",
        "type": "output",
        "description": "Drives the external MOSFET that power-cycles the remaining system, with a 31.25 ms MOS_DRV pulse width and output levels of VDD-0.3 V (high, at 100 µA) and 0.3 V (low, at -100 µA) as specified."
      },
      {
        "number": "9",
        "name": "DNC",
        "type": "unconnected",
        "description": "Do Not Connect pin; leave floating."
      },
      {
        "number": "10",
        "name": "PGOOD",
        "type": "input",
        "description": "Digital power-good input from the battery management IC; a low level resets the internal counter and holds the microcontroller off, with VIH of 0.7xVDD and VIL of 0.3xVDD."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Supply range conflicts within the datasheet: Recommended Operating Ratings (page 4) gives VDD 1.8 V ; Pin 9 is DNC (Do Not Connect) in the pin table, not a functional pin. Its type is set to unconnected; The datasheet uses the name VSSOP (DGS0010A), not MSOP. The package was matched on the 10-pin DGS pa"
        ],
        "pages_sent": 21,
        "cost_usd": 0.0692,
        "at": "2026-10-10T23:30:52"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tpl5100",
        "pages": 21,
        "sha256": "14147dbe08d9741c",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 10,
        "described": 10,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tpl5100dgsr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b8f88eac3ce221c2ccb0b5048f9ad49c2ef4af148f8ae50c4e232e357683f547",
        "checked": "2026-10-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tpl5100dgsr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "8685e095ae775dc65cc50a2074e90872cce8da9099e3fae35bdee348962be00c",
        "checked": "2026-10-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}