main
Ray tpic8101dwr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 2833356
{
  "slug": "tpic8101dwr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments ADCs/DACs - Special Purpose, SOIC-20-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "data acquisition",
    "tpic8101dwr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tpic8101dwr.kicad_sym",
    "tpic8101dwr.kicad_mod",
    "tpic8101dwr.glb",
    "tpic8101dwr.step",
    "tpic8101dwr.lbr",
    "docs/hero.png",
    "docs/tpic8101dwr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "TPIC8101DWR",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-20-300mil",
    "pin_count": 20,
    "category": "Data Acquisition",
    "subcategory": "ADCs/DACs - Special Purpose",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tpic8101",
    "parts": {
      "symbol": "tpic8101dwr.kicad_sym",
      "footprint": "tpic8101dwr.kicad_mod",
      "model_3d": "tpic8101dwr-etched.glb",
      "model_3d_plain": "tpic8101dwr.glb",
      "model_3d_step": "tpic8101dwr-etched.step",
      "model_3d_step_plain": "tpic8101dwr.step",
      "lbr": "tpic8101dwr.lbr"
    },
    "distributor_links": {
      "lcsc": "C469861",
      "digikey": "296-15132-2-ND",
      "mouser": "595-TPIC8101DWR"
    },
    "distributor_check": {
      "checked_at": "2026-09-26T15:38:17Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-15132-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TPIC8101DWR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VDD",
        "type": "power_in",
        "description": "5-V input supply with 4.7-µF external bypass capacitor required for stability of internal circuits."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Ground connection to system ground rail."
      },
      {
        "number": "3",
        "name": "Vref",
        "type": "power_in",
        "description": "Internally generated reference supply voltage with 22-nF external bypass capacitor for bias and noise decoupling."
      },
      {
        "number": "4",
        "name": "OUT",
        "type": "output",
        "description": "Buffered analog integrator output for microprocessor A/D interface with 2.2-nF external stabilizing capacitor."
      },
      {
        "number": "5",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection; terminal reserved for test purposes only, not connected in system application."
      },
      {
        "number": "6",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection; terminal reserved for test purposes only, not connected in system application."
      },
      {
        "number": "7",
        "name": "INT/HOLD",
        "type": "input",
        "description": "Integration/hold mode selection input (high for integrate, low for hold) with internal pulldown for default hold mode."
      },
      {
        "number": "8",
        "name": "CS",
        "type": "input",
        "description": "Chip select for SPI communications, active low with internal pullup resistor for default inactive state."
      },
      {
        "number": "9",
        "name": "XIN",
        "type": "input",
        "description": "Oscillator inverter input for external clock signal with 1-MΩ feedback resistor to XOUT for bias."
      },
      {
        "number": "10",
        "name": "XOUT",
        "type": "output",
        "description": "Oscillator inverter output for external oscillator circuit with 1-MΩ feedback resistor to XIN."
      },
      {
        "number": "11",
        "name": "SDO",
        "type": "tri_state",
        "description": "Serial data output for SPI bus with tri-state high-impedance mode when CS is pulled to VDD."
      },
      {
        "number": "12",
        "name": "SDI",
        "type": "input",
        "description": "Serial data input for SPI with internal pullup to VDD and 8-bit word format data stream."
      },
      {
        "number": "13",
        "name": "SCLK",
        "type": "input",
        "description": "SPI clock input with internal pullup resistor and data clocked into shift register on falling edge."
      },
      {
        "number": "14",
        "name": "TEST",
        "type": "input",
        "description": "Test mode control input, active low with internal pullup to VDD (default inactive, leave open or tie high)."
      },
      {
        "number": "15",
        "name": "CH2P",
        "type": "input",
        "description": "Positive input for amplifier 2 interfacing to knock sensor with input range 0.05 to VDD-0.05 V."
      },
      {
        "number": "16",
        "name": "CH2N",
        "type": "input",
        "description": "Negative input for amplifier 2 interfacing to knock sensor with input range 0.05 to VDD-0.05 V."
      },
      {
        "number": "17",
        "name": "CH2FB",
        "type": "output",
        "description": "Feedback output of amplifier 2 for external gain-setting resistor connection with rail-to-rail compatibility."
      },
      {
        "number": "18",
        "name": "CH1FB",
        "type": "output",
        "description": "Feedback output of amplifier 1 for external gain-setting resistor connection with rail-to-rail compatibility."
      },
      {
        "number": "19",
        "name": "CH1N",
        "type": "input",
        "description": "Negative input for amplifier 1 interfacing to knock sensor with input range 0.05 to VDD-0.05 V."
      },
      {
        "number": "20",
        "name": "CH1P",
        "type": "input",
        "description": "Positive input for amplifier 1 interfacing to knock sensor with input range 0.05 to VDD-0.05 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-4-6",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 27,
        "cost_usd": 0.2588,
        "at": "2026-09-26T15:37:58"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tpic8101",
        "pages": 27,
        "sha256": "6db1737f45a80b67",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 20,
        "described": 20,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tpic8101dwr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          12.8,
          2.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "59a10b341e6972b31d81802a048060326da627d8b92dcf4263064f4f62ec808e",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tpic8101dwr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          12.8,
          2.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "53a66df34e78c762c6eaaec856637ffa882bb8008efc77526146fd96db24685b",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}