← Commit history

Initial commit: component/tpic6595dwr

Ray ·6f19ab2816 ·
2 files changed +272
README.mdadded+57
@@ -0,0 +1,57 @@+# TPIC6595DWR++**Texas Instruments** · Shift Registers · SOIC-20-300mil++TPIC6595DWR from Texas Instruments, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | PGND | power_in | Power ground; pins 1, 10, 11, and 20 must all be externally connected to system ground to minimize parasitic inductance. |+| 2 | VCC | power_in | Power supply input, recommended operating range 4.5V to 5.5V. |+| 3 | SER IN | input | Serial data input to shift register with 10ns setup and hold time requirements. |+| 4 | DRAIN0 | tri_state | Open-drain output with 45V rating, 250mA continuous sink current, and 1.5A pulsed current capability. |+| 5 | DRAIN1 | tri_state | Open-drain output with 45V rating, 250mA continuous sink current, and 1.5A pulsed current capability. |+| 6 | DRAIN2 | tri_state | Open-drain output with 45V rating, 250mA continuous sink current, and 1.5A pulsed current capability. |+| 7 | DRAIN3 | tri_state | Open-drain output with 45V rating, 250mA continuous sink current, and 1.5A pulsed current capability. |+| 8 | SRCLR | input | Shift register clear input, active-low; clears all internal registers when pulled low. |+| 9 | G | input | Output enable input, active-low; when high, all outputs are off; when low, data is transparent to output buffers. |+| 10 | PGND | power_in | Power ground; pins 1, 10, 11, and 20 must all be externally connected to system ground to minimize parasitic inductance. |+| 11 | PGND | power_in | Power ground; pins 1, 10, 11, and 20 must all be externally connected to system ground to minimize parasitic inductance. |+| 12 | RCK | input | Register clock input; transfers data from shift register to storage register on rising edge when RCK is low for write/read validity. |+| 13 | SRCK | input | Shift register clock input; shifts data on rising edge with 10ns setup and hold time requirements. |+| 14 | DRAIN4 | tri_state | Open-drain output with 45V rating, 250mA continuous sink current, and 1.5A pulsed current capability. |+| 15 | DRAIN5 | tri_state | Open-drain output with 45V rating, 250mA continuous sink current, and 1.5A pulsed current capability. |+| 16 | DRAIN6 | tri_state | Open-drain output with 45V rating, 250mA continuous sink current, and 1.5A pulsed current capability. |+| 17 | DRAIN7 | tri_state | Open-drain output with 45V rating, 250mA continuous sink current, and 1.5A pulsed current capability. |+| 18 | SER OUT | output | Serial data output from shift register for cascading data to additional devices in daisy-chain configuration. |+| 19 | LGND | power_in | Logic ground with single-point external connection required to PGND to reduce crosstalk between logic and load circuits. |+| 20 | PGND | power_in | Power ground; pins 1, 10, 11, and 20 must all be externally connected to system ground to minimize parasitic inductance. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-20-300mil |+| Category | Logic |+| Pins | 20 |++## CAD (KiCad official)++- Symbol: `TPIC6595DWR`+- Footprint: `Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm`+- 3D model: SOIC-20-300mil (KiCad packages3D, STEP)+- 3D model files: `tpic6595dwr-etched.step` / `tpic6595dwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tpic6595dwr.step` / `tpic6595dwr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tpic6595) (24 pp, sha256 `fc8eb5c798fe3e7f`, retrieved 2026-09-24, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tpic6595dwr-datasheet.pdf)
page.jsonadded+215
@@ -0,0 +1,215 @@+{+  "slug": "tpic6595dwr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Shift Registers, SOIC-20-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "logic",+    "tpic6595dwr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tpic6595dwr.kicad_sym",+    "tpic6595dwr.kicad_mod",+    "tpic6595dwr.glb",+    "tpic6595dwr.step",+    "tpic6595dwr.lbr",+    "docs/hero.png",+    "docs/tpic6595dwr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "TPIC6595DWR",+    "manufacturer": "Texas Instruments",+    "package": "SOIC-20-300mil",+    "pin_count": 20,+    "category": "Logic",+    "subcategory": "Shift Registers",+    "datasheet": "https://www.ti.com/cn/lit/gpn/tpic6595",+    "parts": {+      "symbol": "tpic6595dwr.kicad_sym",+      "footprint": "tpic6595dwr.kicad_mod",+      "model_3d": "tpic6595dwr-etched.glb",+      "model_3d_plain": "tpic6595dwr.glb",+      "model_3d_step": "tpic6595dwr-etched.step",+      "model_3d_step_plain": "tpic6595dwr.step",+      "lbr": "tpic6595dwr.lbr"+    },+    "distributor_links": {+      "lcsc": "C2859999"+    },+    "pins": [+      {+        "number": "1",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground; pins 1, 10, 11, and 20 must all be externally connected to system ground to minimize parasitic inductance."+      },+      {+        "number": "2",+        "name": "VCC",+        "type": "power_in",+        "description": "Power supply input, recommended operating range 4.5V to 5.5V."+      },+      {+        "number": "3",+        "name": "SER IN",+        "type": "input",+        "description": "Serial data input to shift register with 10ns setup and hold time requirements."+      },+      {+        "number": "4",+        "name": "DRAIN0",+        "type": "tri_state",+        "description": "Open-drain output with 45V rating, 250mA continuous sink current, and 1.5A pulsed current capability."+      },+      {+        "number": "5",+        "name": "DRAIN1",+        "type": "tri_state",+        "description": "Open-drain output with 45V rating, 250mA continuous sink current, and 1.5A pulsed current capability."+      },+      {+        "number": "6",+        "name": "DRAIN2",+        "type": "tri_state",+        "description": "Open-drain output with 45V rating, 250mA continuous sink current, and 1.5A pulsed current capability."+      },+      {+        "number": "7",+        "name": "DRAIN3",+        "type": "tri_state",+        "description": "Open-drain output with 45V rating, 250mA continuous sink current, and 1.5A pulsed current capability."+      },+      {+        "number": "8",+        "name": "SRCLR",+        "type": "input",+        "description": "Shift register clear input, active-low; clears all internal registers when pulled low."+      },+      {+        "number": "9",+        "name": "G",+        "type": "input",+        "description": "Output enable input, active-low; when high, all outputs are off; when low, data is transparent to output buffers."+      },+      {+        "number": "10",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground; pins 1, 10, 11, and 20 must all be externally connected to system ground to minimize parasitic inductance."+      },+      {+        "number": "11",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground; pins 1, 10, 11, and 20 must all be externally connected to system ground to minimize parasitic inductance."+      },+      {+        "number": "12",+        "name": "RCK",+        "type": "input",+        "description": "Register clock input; transfers data from shift register to storage register on rising edge when RCK is low for write/read validity."+      },+      {+        "number": "13",+        "name": "SRCK",+        "type": "input",+        "description": "Shift register clock input; shifts data on rising edge with 10ns setup and hold time requirements."+      },+      {+        "number": "14",+        "name": "DRAIN4",+        "type": "tri_state",+        "description": "Open-drain output with 45V rating, 250mA continuous sink current, and 1.5A pulsed current capability."+      },+      {+        "number": "15",+        "name": "DRAIN5",+        "type": "tri_state",+        "description": "Open-drain output with 45V rating, 250mA continuous sink current, and 1.5A pulsed current capability."+      },+      {+        "number": "16",+        "name": "DRAIN6",+        "type": "tri_state",+        "description": "Open-drain output with 45V rating, 250mA continuous sink current, and 1.5A pulsed current capability."+      },+      {+        "number": "17",+        "name": "DRAIN7",+        "type": "tri_state",+        "description": "Open-drain output with 45V rating, 250mA continuous sink current, and 1.5A pulsed current capability."+      },+      {+        "number": "18",+        "name": "SER OUT",+        "type": "output",+        "description": "Serial data output from shift register for cascading data to additional devices in daisy-chain configuration."+      },+      {+        "number": "19",+        "name": "LGND",+        "type": "power_in",+        "description": "Logic ground with single-point external connection required to PGND to reduce crosstalk between logic and load circuits."+      },+      {+        "number": "20",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground; pins 1, 10, 11, and 20 must all be externally connected to system ground to minimize parasitic inductance."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "1/20 pins cited to the wrong page (name found elsewhere): ['6:DRAIN2@p3']"+        ],+        "pages_sent": 24,+        "cost_usd": 0.2024,+        "at": "2026-09-24T01:17:51"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/tpic6595",+        "pages": 24,+        "sha256": "fc8eb5c798fe3e7f",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 20,+        "described": 20,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file