TPD4S014DSQR

{
  "slug": "tpd4s014dsqr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Global Sourcing Parts, WSON-10-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "global sourcing parts",
    "tpd4s014dsqr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tpd4s014dsqr.kicad_sym",
    "tpd4s014dsqr.kicad_mod",
    "tpd4s014dsqr.glb",
    "tpd4s014dsqr.step",
    "tpd4s014dsqr.lbr",
    "docs/hero.png",
    "docs/tpd4s014dsqr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tpd4s014dsqr-hero.glb",
    "tpd4s014dsqr-hero.overlay.json",
    "tpd4s014dsqr-etched.glb"
  ],
  "component": {
    "mpn": "TPD4S014DSQR",
    "manufacturer": "Texas Instruments",
    "package": "WSON-10-EP(2x2)",
    "pin_count": 11,
    "category": "Global Sourcing Parts",
    "subcategory": "Global Sourcing Parts",
    "datasheet": "https://www.ti.com/lit/ds/symlink/tpd4s014.pdf",
    "parts": {
      "symbol": "tpd4s014dsqr.kicad_sym",
      "footprint": "tpd4s014dsqr.kicad_mod",
      "model_3d": "tpd4s014dsqr-hero.glb",
      "model_3d_plain": "tpd4s014dsqr-etched.glb",
      "model_3d_step": "tpd4s014dsqr-etched.step",
      "model_3d_step_plain": "tpd4s014dsqr.step",
      "lbr": "tpd4s014dsqr.lbr"
    },
    "distributor_links": {
      "lcsc": "C202244",
      "digikey": "296-29093-2-ND",
      "mouser": "595-TPD4S014DSQR"
    },
    "distributor_check": {
      "checked_at": "2026-11-06T02:18:47Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-29093-2-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-TPD4S014DSQR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VBUSOUT",
        "type": "power_out",
        "description": "Switched output of the internal nFET to the downstream circuits; connect to an internal PCB plane, with recommended operating input range -0.1 V to 5.5 V and 10 µF capacitance."
      },
      {
        "number": "2",
        "name": "VBUSOUT",
        "type": "power_out",
        "description": "Switched output of the internal nFET to the downstream circuits; connect to an internal PCB plane, with recommended operating input range -0.1 V to 5.5 V and 10 µF capacitance."
      },
      {
        "number": "3",
        "name": "EN",
        "type": "input",
        "description": "Active-low enable input: drive EN low to enable the switch and high (1 V to 6 V) to disable it, with absolute maximum voltage of 6 V."
      },
      {
        "number": "4",
        "name": "ACK",
        "type": "output",
        "description": "Open-drain adapter-voltage indicator output, driven low 17 ms (typ) after VIN is stable between UVLO and OVLO, requiring a 10 kΩ pullup to the host logic I/O voltage."
      },
      {
        "number": "5",
        "name": "ID",
        "type": "bidirectional",
        "description": "ESD-protected line with reverse stand-off voltage of 5 V and ESD protection to ±15 kV contact and air-gap discharge."
      },
      {
        "number": "6",
        "name": "D-",
        "type": "bidirectional",
        "description": "ESD-protected USB data line with reverse stand-off voltage of 5 V and low capacitance of 1.6 pF to GND."
      },
      {
        "number": "7",
        "name": "D+",
        "type": "bidirectional",
        "description": "ESD-protected USB data line with reverse stand-off voltage of 5 V and low capacitance of 1.6 pF to GND."
      },
      {
        "number": "8",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device; connect to a low-impedance ground plane stitched near the GND pins to dissipate ESD events."
      },
      {
        "number": "9",
        "name": "VBUS",
        "type": "power_in",
        "description": "USB input power connector side of VBUS, rated for input voltage protection up to 28 V DC with absolute maximum of 30 V."
      },
      {
        "number": "10",
        "name": "VBUS",
        "type": "power_in",
        "description": "USB input power connector side of VBUS, rated for input voltage protection up to 28 V DC with absolute maximum of 30 V."
      },
      {
        "number": "11",
        "name": "Central PAD",
        "type": "unconnected",
        "description": "Exposed thermal pad that is electrically disconnected from the device and must be used as a heat sink connected to a large GND plane pad on the PCB."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The central exposed pad has no printed number in the pin table on page 4. Pin number 11 comes from t",
          "1/11 pin names appear NOWHERE in the datasheet text: ['7:D+@p4']"
        ],
        "pages_sent": 25,
        "cost_usd": 0.0246,
        "at": "2026-11-06T02:18:35"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/tpd4s014.pdf",
        "pages": 25,
        "sha256": "c9cbfbb5333284ff",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 11,
        "described": 11,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tpd4s014dsqr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.0,
          1.975,
          0.8
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f2001b3f9a6ae3d0c8b7e19aea57daac7f0bb7d40364983cd7bb958958273a6d",
        "checked": "2026-11-06",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tpd4s014dsqr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.0,
          1.975,
          0.8
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "12466e0cf55ee09e70c0bf545e751ce9ef545b7745a3dab3d6504b55f9835b24",
        "checked": "2026-11-06",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}