main
Ray
Set visibility: public
4e6670f
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986
{
"schema_version": 1,
"type": "component",
"slug": "tpd3s716qdbqrq1",
"title": "TPD3S716QDBQRQ1",
"brief": "Texas Instruments Surge Suppressors, SSOP-16-150mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"tvs-fuse-board level protection",
"tpd3s716qdbqrq1",
"factory-2.0.0",
"extractor-text"
],
"component": {
"mpn": "TPD3S716QDBQRQ1",
"manufacturer": "Texas Instruments",
"package": "SSOP-16-150mil",
"pin_count": 16,
"category": "TVS/Fuse/Board Level Protection",
"subcategory": "Surge Suppressors",
"datasheet": "https://www.ti.com/lit/ds/symlink/tpd3s716-q1.pdf",
"parts": {
"symbol": "tpd3s716qdbqrq1.kicad_sym",
"footprint": "tpd3s716qdbqrq1.kicad_mod",
"model_3d": "tpd3s716qdbqrq1-hero.glb",
"model_3d_step": "tpd3s716qdbqrq1.step",
"lbr": "tpd3s716qdbqrq1.lbr",
"model_3d_plain": "tpd3s716qdbqrq1.glb"
},
"distributor_links": {
"lcsc": "C2649847",
"digikey": "296-44161-2-ND",
"mouser": "595-TPD3S716QDBQRQ1"
},
"distributor_check": {
"checked_at": "2026-11-11T11:08:12Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "296-44161-2-ND",
"status": "found",
"lifecycle": "Active"
},
"mouser": {
"pn": "595-TPD3S716QDBQRQ1",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "NC",
"type": "unconnected",
"description": "No connect; leave floating or connect to ground, and do not connect to VBUS_CON."
},
{
"number": "2",
"name": "VBUS_CON",
"type": "output",
"description": "Connect to USB connector VBUS; provides IEC 61000-4-2 ESD protection, and the pin withstands −0.3 V to 18 V per the absolute maximum ratings."
},
{
"number": "3",
"name": "VBUS_CON",
"type": "output",
"description": "Connect to USB connector VBUS; provides IEC 61000-4-2 ESD protection, and the pin withstands −0.3 V to 18 V per the absolute maximum ratings."
},
{
"number": "4",
"name": "GND",
"type": "power_in",
"description": "Ground; connect to PCB ground plane."
},
{
"number": "5",
"name": "VD–",
"type": "bidirectional",
"description": "Connect to USB connector D-; provides IEC 61000-4-2 ESD protection and is rated −0.3 V to 18 V per the absolute maximum ratings."
},
{
"number": "6",
"name": "VD+",
"type": "bidirectional",
"description": "Connect to USB connector D+; provides IEC 61000-4-2 ESD protection and is rated −0.3 V to 18 V per the absolute maximum ratings."
},
{
"number": "7",
"name": "VEN",
"type": "input",
"description": "Active-low enable input; drive low to enable the VBUS path and high to disable it, with a recommended voltage range of 0 V to 5.9 V."
},
{
"number": "8",
"name": "DEN",
"type": "input",
"description": "Active-low enable input; drive low to enable the data path and high to disable it, with a recommended voltage range of 0 V to 5.9 V."
},
{
"number": "9",
"name": "VIN",
"type": "power_in",
"description": "Connect to 3.3-V I/O; controls the OVP threshold for VD+/VD-, with a recommended supply range of 3 V to 3.6 V."
},
{
"number": "10",
"name": "FLT",
"type": "output",
"description": "Open-drain fault output that is pulled low when a fault occurs; absolute maximum −0.3 V to 7 V and VOL of 0.4 V max at 3 mA."
},
{
"number": "11",
"name": "D+",
"type": "bidirectional",
"description": "Connect to the internal transceiver D+ pin."
},
{
"number": "12",
"name": "D–",
"type": "bidirectional",
"description": "Connect to the internal transceiver D- pin."
},
{
"number": "13",
"name": "GND",
"type": "power_in",
"description": "Ground; connect to PCB ground plane."
},
{
"number": "14",
"name": "VBUS_SYS",
"type": "input",
"description": "Connect to internal VBUS plane; recommended internal supply DC voltage is 4.75 V to 5.9 V."
},
{
"number": "15",
"name": "VBUS_SYS",
"type": "input",
"description": "Connect to internal VBUS plane; recommended internal supply DC voltage is 4.75 V to 5.9 V."
},
{
"number": "16",
"name": "IADJ",
"type": "input",
"description": "Connect to a resistor to GND to set the current limit threshold; RADJ is specified at a minimum of 57 kΩ."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [],
"pages_sent": 33,
"cost_usd": 0.1517,
"at": "2026-11-11T11:08:01"
},
"datasheet": {
"url": "https://www.ti.com/lit/ds/symlink/tpd3s716-q1.pdf",
"pages": 33,
"sha256": "3c73efd1fb7bad2b",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 16,
"described": 16,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "tpd3s716qdbqrq1.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.85
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "3b55ed1c8dc3eb976cfab8b1e135fd29a17f33ebf575a8a088a30e82c9a5f2ee",
"checked": "2026-11-11",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "Texas Instruments",
"Package": "SSOP-16-150mil",
"Category": "TVS/Fuse/Board Level Protection",
"Pins": "16"
},
"appearance": {
"contacts": {
"quote": "signal pins when possible. Another key strategy is to maximize the copper weight of the PCB metal layers. This",
"page": 24,
"doc": "ds.pdf",
"material": "copper"
},
"version": 1,
"datasheet_sha256": "3c73efd1fb7bad2bc2bdd9ea6b24dfb3365b3b2011678f346db0d08d427f3ce1"
},
"characteristics": {
"version": 1,
"source": "datasheet",
"datasheet_sha256": "3c73efd1fb7bad2bc2bdd9ea6b24dfb3365b3b2011678f346db0d08d427f3ce1",
"rows": [
{
"name": "VBUS_CON Supply voltage from USB connector",
"symbol": "",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 18,
"conditions": "",
"source_page": 4,
"source": "datasheet"
},
{
"name": "VBUS_SYS Internal Supply DC voltage Rail on the PCB",
"symbol": "",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 6,
"conditions": "",
"source_page": 4,
"source": "datasheet"
},
{
"name": "VD+, VD– Voltage range from connector-side USB data lines",
"symbol": "",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 18,
"conditions": "",
"source_page": 4,
"source": "datasheet"
},
{
"name": "D+, D– Voltage range for internal USB data lines",
"symbol": "",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": null,
"conditions": "max printed as VIN + 0.3 V",
"source_page": 4,
"source": "datasheet"
},
{
"name": "VIN Voltage range for VIN supply input",
"symbol": "",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 4,
"conditions": "",
"source_page": 4,
"source": "datasheet"
},
{
"name": "Voltage on enable pin DEN",
"symbol": "DEN",
"kind": "absolute_maximum",
"unit": "V",
"min": null,
"typ": null,
"max": 7,
"conditions": "",
"source_page": 4,
"source": "datasheet"
},
{
"name": "Voltage on enable pin VEN",
"symbol": "VEN",
"kind": "absolute_maximum",
"unit": "V",
"min": null,
"typ": null,
"max": 7,
"conditions": "",
"source_page": 4,
"source": "datasheet"
},
{
"name": "IBUS Maximum DC output current on VBUS_CON pin",
"symbol": "IBUS",
"kind": "absolute_maximum",
"unit": "A",
"min": null,
"typ": null,
"max": 2.4,
"conditions": "",
"source_page": 4,
"source": "datasheet"
},
{
"name": "Voltage range for IADJ pin",
"symbol": "VIADJ",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": null,
"conditions": "max printed as VVBUS_SYS + 0.3 V",
"source_page": 4,
"source": "datasheet"
},
{
"name": "Voltage range for the FLT pin",
"symbol": "VFLT",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 7,
"conditions": "",
"source_page": 4,
"source": "datasheet"
},
{
"name": "TA Operating free air temperature",
"symbol": "TA",
"kind": "absolute_maximum",
"unit": "°C",
"min": -40,
"typ": null,
"max": 125,
"conditions": "",
"source_page": 4,
"source": "datasheet"
},
{
"name": "TSTG Storage temperature",
"symbol": "TSTG",
"kind": "absolute_maximum",
"unit": "°C",
"min": -65,
"typ": null,
"max": 150,
"conditions": "",
"source_page": 4,
"source": "datasheet"
},
{
"name": "VBUS_CON Supply voltage from USB connector (recommended)",
"symbol": "",
"kind": "recommended_operating",
"unit": "V",
"min": null,
"typ": null,
"max": 5.9,
"conditions": "",
"source_page": 4,
"source": "datasheet"
},
{
"name": "VBUS_SYS Internal supply DC voltage Rail on the PCB (recommended)",
"symbol": "",
"kind": "recommended_operating",
"unit": "V",
"min": 4.75,
"typ": null,
"max": 5.9,
"conditions": "",
"source_page": 4,
"source": "datasheet"
},
{
"name": "VD+, VD– Voltage range from connector-side USB data lines (recommended)",
"symbol": "",
"kind": "recommended_operating",
"unit": "V",
"min": 0,
"typ": null,
"max": null,
"conditions": "max printed as VIN + 0.3 V",
"source_page": 4,
"source": "datasheet"
},
{
"name": "D+, D– Voltage range for internal USB data lines (recommended)",
"symbol": "",
"kind": "recommended_operating",
"unit": "V",
"min": 0,
"typ": null,
"max": null,
"conditions": "max printed as VIN + 0.3 V",
"source_page": 5,
"source": "datasheet"
},
{
"name": "VIN Voltage range for VIN supply",
"symbol": "VIN",
"kind": "recommended_operating",
"unit": "V",
"min": 3,
"typ": null,
"max": 3.6,
"conditions": "",
"source_page": 5,
"source": "datasheet"
},
{
"name": "IBUS Current through VBUS switch",
"symbol": "IBUS",
"kind": "recommended_operating",
"unit": "A",
"min": null,
"typ": null,
"max": 2.4,
"conditions": "",
"source_page": 5,
"source": "datasheet"
},
{
"name": "VEN, DEN Voltage range for enable",
"symbol": "VEN, DEN",
"kind": "recommended_operating",
"unit": "V",
"min": 0,
"typ": null,
"max": 5.9,
"conditions": "",
"source_page": 5,
"source": "datasheet"
},
{
"name": "CSYS Input capacitance VBUS_SYS pin",
"symbol": "CSYS",
"kind": "recommended_operating",
"unit": "µF",
"min": 100,
"typ": null,
"max": null,
"conditions": "",
"source_page": 5,
"source": "datasheet"
},
{
"name": "CLOAD Output load capacitance VBUS_CON pin",
"symbol": "CLOAD",
"kind": "recommended_operating",
"unit": "µF",
"min": 1,
"typ": null,
"max": null,
"conditions": "",
"source_page": 5,
"source": "datasheet"
},
{
"name": "CVIN VIN capacitance VIN pin",
"symbol": "CVIN",
"kind": "recommended_operating",
"unit": "µF",
"min": 1,
"typ": null,
"max": null,
"conditions": "",
"source_page": 5,
"source": "datasheet"
},
{
"name": "RADJ Resistance of RADJ resistor IADJ pin",
"symbol": "RADJ",
"kind": "recommended_operating",
"unit": "kΩ",
"min": 57,
"typ": null,
"max": null,
"conditions": "",
"source_page": 5,
"source": "datasheet"
},
{
"name": "VBUS sleep current consumption",
"symbol": "IVBUS_SLEEP",
"kind": "electrical",
"unit": "µA",
"min": null,
"typ": 45,
"max": 150,
"conditions": "Measured at VBUS_SYS pin, VEN = 5 V, DEN = 5 V",
"source_page": 5,
"source": "datasheet"
},
{
"name": "VBUS operating current consumption",
"symbol": "IVBUS",
"kind": "electrical",
"unit": "µA",
"min": null,
"typ": 285,
"max": 380,
"conditions": "Measured at VBUS_SYS pin",
"source_page": 5,
"source": "datasheet"
},
{
"name": "Leakage current for VIN",
"symbol": "IVIN",
"kind": "electrical",
"unit": "µA",
"min": null,
"typ": 12,
"max": 20,
"conditions": "Measured at VIN pin, VIN = 3.6 V",
"source_page": 5,
"source": "datasheet"
},
{
"name": "Leakage into VBUS_SYS while shorted to battery and powered on",
"symbol": "ION(LEAK)",
"kind": "electrical",
"unit": "µA",
"min": null,
"typ": 225,
"max": 300,
"conditions": "Measured flowing into VBUS_SYS pin, VBUS_SYS = 5 V, VBUS_CON = 18 V",
"source_page": 5,
"source": "datasheet"
},
{
"name": "Leakage out of data path while shorted to battery and unpowered",
"symbol": "ID(OFF_LEAK)",
"kind": "electrical",
"unit": "µA",
"min": -1,
"typ": null,
"max": 1,
"conditions": "Measured flowing out of D+ or D– pins, VBUS_SYS = 0 V, VD+ or VD– = 18 V, VIN = 0 V, D+/D– = 0 V",
"source_page": 5,
"source": "datasheet"
},
{
"name": "Leakage out of data path while shorted to battery and powered on",
"symbol": "ID(ON_LEAK)",
"kind": "electrical",
"unit": "µA",
"min": -1,
"typ": null,
"max": 1,
"conditions": "Measured flowing out of D+ or D– pins, VBUS_SYS = 5 V, VD+ or VD– = 18 V, VIN = 3.3 V, D+/D– = 0 V",
"source_page": 5,
"source": "datasheet"
},
{
"name": "Undervoltage lockout rising for VIN",
"symbol": "VUVLO(RISING)",
"kind": "electrical",
"unit": "V",
"min": 2.6,
"typ": 2.7,
"max": 2.9,
"conditions": "Ramp VIN up until VBUS and Data FETs turn on, VEN = 0 V, DEN = 0 V",
"source_page": 6,
"source": "datasheet"
},
{
"name": "Undervoltage lockout falling for VIN",
"symbol": "VUVLO(FALLING)",
"kind": "electrical",
"unit": "V",
"min": 2.5,
"typ": 2.6,
"max": 2.8,
"conditions": "Ramp VIN down until VBUS and Data FETs turn off, VEN = 0 V, DEN = 0 V",
"source_page": 6,
"source": "datasheet"
},
{
"name": "Overcurrent limit VBUS",
"symbol": "ILIM",
"kind": "electrical",
"unit": "mA",
"min": 505,
"typ": null,
"max": 620,
"conditions": "RADJ = 280 kΩ ± 1%; progressively load VBUS_CON until device asserts FLT",
"source_page": 6,
"source": "datasheet"
},
{
"name": "Overcurrent limit VBUS",
"symbol": "ILIM",
"kind": "electrical",
"unit": "A",
"min": 0.905,
"typ": null,
"max": 1.1,
"conditions": "RADJ = 158 kΩ ± 1%; progressively load VBUS_CON until device asserts FLT",
"source_page": 6,
"source": "datasheet"
},
{
"name": "Overcurrent limit VBUS",
"symbol": "ILIM",
"kind": "electrical",
"unit": "A",
"min": 1.005,
"typ": null,
"max": 1.2,
"conditions": "RADJ = 143 kΩ ± 1%; progressively load VBUS_CON until device asserts FLT",
"source_page": 6,
"source": "datasheet"
},
{
"name": "Overcurrent limit VBUS",
"symbol": "ILIM",
"kind": "electrical",
"unit": "A",
"min": 1.505,
"typ": null,
"max": 1.8,
"conditions": "RADJ = 93.1 kΩ ± 1%; progressively load VBUS_CON until device asserts FLT",
"source_page": 6,
"source": "datasheet"
},
{
"name": "Overcurrent limit VBUS",
"symbol": "ILIM",
"kind": "electrical",
"unit": "A",
"min": 1.8,
"typ": null,
"max": 2.16,
"conditions": "RADJ = 76.8 kΩ ± 1%; progressively load VBUS_CON until device asserts FLT",
"source_page": 6,
"source": "datasheet"
},
{
"name": "Overcurrent limit VBUS",
"symbol": "ILIM",
"kind": "electrical",
"unit": "A",
"min": 2.105,
"typ": null,
"max": 2.57,
"conditions": "RADJ = 66.5 kΩ ± 1%; progressively load VBUS_CON until device asserts FLT",
"source_page": 6,
"source": "datasheet"
},
{
"name": "Overcurrent limit VBUS",
"symbol": "ILIM",
"kind": "electrical",
"unit": "A",
"min": 2.405,
"typ": null,
"max": 2.93,
"conditions": "RADJ = 57.6 kΩ ± 1%; progressively load VBUS_CON until device asserts FLT",
"source_page": 6,
"source": "datasheet"
},
{
"name": "Overcurrent limit VBUS",
"symbol": "ILIM",
"kind": "electrical",
"unit": "mA",
"min": 550,
"typ": 700,
"max": 850,
"conditions": "IADJ = GND; progressively load VBUS_CON until device asserts FLT",
"source_page": 6,
"source": "datasheet"
},
{
"name": "Overcurrent limit VBUS",
"symbol": "ILIM",
"kind": "electrical",
"unit": "A",
"min": 1.1,
"typ": 1.4,
"max": 1.7,
"conditions": "IADJ = VBUS_SYS; progressively load VBUS_CON until device asserts FLT",
"source_page": 6,
"source": "datasheet"
},
{
"name": "The rising over-temperature protection shutdown threshold",
"symbol": "TSD(RISING)",
"kind": "electrical",
"unit": "℃",
"min": 150,
"typ": 165,
"max": 180,
"conditions": "VBUS_SYS = 5 V, VEN = 0 V, DEN = 0 V, no load on VBUS_CON; TA stepped up until FLT asserted",
"source_page": 6,
"source": "datasheet"
},
{
"name": "The falling over-temperature protection shutdown threshold",
"symbol": "TSD(FALLING)",
"kind": "electrical",
"unit": "℃",
"min": 125,
"typ": 130,
"max": 142,
"conditions": "VBUS_SYS = 5 V, VEN = 0 V, DEN = 0 V, no load on VBUS_CON; TA stepped down until FLT deasserted",
"source_page": 6,
"source": "datasheet"
},
{
"name": "The over-temperature protection shutdown threshold hysteresis",
"symbol": "TSD(HYST)",
"kind": "electrical",
"unit": "℃",
"min": 10,
"typ": 35,
"max": 55,
"conditions": "TSD(RISING) – TSD(FALLING)",
"source_page": 6,
"source": "datasheet"
},
{
"name": "Input overvoltage protection threshold VBUS_CON rising",
"symbol": "VOVP(RISING)",
"kind": "electrical",
"unit": "V",
"min": 5.6,
"typ": 5.8,
"max": 6,
"conditions": "Increase VBUS_CON from 5 V to 7 V; measure when FLT is asserted",
"source_page": 6,
"source": "datasheet"
},
{
"name": "Input overvoltage protection threshold VBUS_CON falling",
"symbol": "VOVP(FALLING)",
"kind": "electrical",
"unit": "V",
"min": 5.52,
"typ": 5.75,
"max": 5.98,
"conditions": "Decrease VBUS_CON from 7 V to 5 V; measure when FLT is deasserted",
"source_page": 6,
"source": "datasheet"
},
{
"name": "Reverse supply detection threshold rising VBUS_CON – VBUS_SYS",
"symbol": "VREV_SUPPLY(RISING)",
"kind": "electrical",
"unit": "mV",
"min": 140,
"typ": 200,
"max": 260,
"conditions": "VBUS_SYS = 5 V; increase VBUS_CON from VBUS_SYS to VBUS_SYS + 300 mV; 25°C ≤ TA ≤ 125°C",
"source_page": 6,
"source": "datasheet"
},
{
"name": "Reverse supply detection threshold falling VBUS_CON – VBUS_SYS",
"symbol": "VREV_SUPPLY(FALLING)",
"kind": "electrical",
"unit": "mV",
"min": 70,
"typ": 120,
"max": 165,
"conditions": "VBUS_SYS = 5 V; decrease VBUS_CON from VBUS_SYS + 300 mV to VBUS_SYS; 25°C ≤ TA ≤ 125°C",
"source_page": 6,
"source": "datasheet"
},
{
"name": "Undervoltage lockout rising for VBUS_SYS",
"symbol": "VUVLO(SYS_RISING)",
"kind": "electrical",
"unit": "V",
"min": 3.1,
"typ": 3.3,
"max": 3.6,
"conditions": "VBUS_SYS voltage rising from 0 V to 5 V",
"source_page": 7,
"source": "datasheet"
},
{
"name": "VBUS_SYS UVLO Hysteresis",
"symbol": "VHYS(UVLO_SYS)",
"kind": "electrical",
"unit": "mV",
"min": 50,
"typ": 75,
"max": 100,
"conditions": "Difference between rising and falling UVLO thresholds on VBUS_SYS",
"source_page": 7,
"source": "datasheet"
},
{
"name": "Undervoltage lockout falling for VBUS_SYS",
"symbol": "VUVLO(SYS_FALLING)",
"kind": "electrical",
"unit": "V",
"min": 3,
"typ": 3.2,
"max": 3.5,
"conditions": "VBUS_SYS voltage falling from 5 V to 2.9 V",
"source_page": 7,
"source": "datasheet"
},
{
"name": "Short-to-ground comparator rising threshold VBUS_CON",
"symbol": "VSHRT(RISING)",
"kind": "electrical",
"unit": "V",
"min": 2.5,
"typ": 2.6,
"max": 2.7,
"conditions": "Increase VBUS_CON from 0 V until device transitions from short-circuit to over-current mode",
"source_page": 7,
"source": "datasheet"
},
{
"name": "Short-to-ground comparator falling threshold VBUS_CON",
"symbol": "VSHRT(FALLING)",
"kind": "electrical",
"unit": "V",
"min": 2.4,
"typ": 2.5,
"max": 2.6,
"conditions": "VBUS_SYS = 5 V; VIN = 3.3 V; VEN = 0 V, DEN = 0 V; decrease VBUS_CON from 5 V until transition to short-circuit mode",
"source_page": 7,
"source": "datasheet"
},
{
"name": "Short-to-ground current source VBUS_CON",
"symbol": "ISHRT",
"kind": "electrical",
"unit": "mA",
"min": 150,
"typ": null,
"max": 350,
"conditions": "Current sourced from VBUS_SYS when device is in short-circuit mode",
"source_page": 7,
"source": "datasheet"
},
{
"name": "On Resistance between D+ and VD+ or D– and VD–",
"symbol": "RON",
"kind": "electrical",
"unit": "Ω",
"min": null,
"typ": 4,
"max": 6.5,
"conditions": "Measure between D+ and VD+ or D– and VD–, voltage between 0 V and 0.4 V",
"source_page": 7,
"source": "datasheet"
},
{
"name": "On Resistance flatness",
"symbol": "RON(Flat)",
"kind": "electrical",
"unit": "Ω",
"min": null,
"typ": 0.2,
"max": 1,
"conditions": "Measure between D+ and VD+ or D– and VD–, sweep voltage between 0 V and 0.4 V",
"source_page": 7,
"source": "datasheet"
},
{
"name": "Output discharge resistance",
"symbol": "R(DISCHARGE)",
"kind": "electrical",
"unit": "kΩ",
"min": 18,
"typ": null,
"max": 30,
"conditions": "VEN = 5 V, DEN = 5 V, VBUS_CON = 5 V; measure current flow to ground",
"source_page": 7,
"source": "datasheet"
},
{
"name": "VBUS path ON resistance",
"symbol": "RON",
"kind": "electrical",
"unit": "mΩ",
"min": null,
"typ": 63,
"max": 135,
"conditions": "VBUS_CON = 5 V, IOUT = 1.5 A",
"source_page": 7,
"source": "datasheet"
},
{
"name": "OVP Response time VBUS",
"symbol": "tOVP_response",
"kind": "timing",
"unit": "µs",
"min": null,
"typ": 2,
"max": 4,
"conditions": "Measured from OVP condition to FET turnoff",
"source_page": 8,
"source": "datasheet"
},
{
"name": "Junction-to-ambient thermal resistance",
"symbol": "θJA",
"kind": "thermal",
"unit": "°C/W",
"min": null,
"typ": 98.8,
"max": null,
"conditions": "",
"source_page": 5,
"source": "datasheet"
},
{
"name": "Junction-to-ambient thermal resistance (custom layout)",
"symbol": "θJA(Custom)",
"kind": "thermal",
"unit": "°C/W",
"min": null,
"typ": 57,
"max": null,
"conditions": "See Layout Optimized for Thermal Performance section",
"source_page": 5,
"source": "datasheet"
}
]
}
},
"variants": [],
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"tpd3s716qdbqrq1"
],
"discovery_pitch": "TPD3S716QDBQRQ1 (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"tpd3s716qdbqrq1.kicad_sym",
"tpd3s716qdbqrq1.kicad_mod",
"tpd3s716qdbqrq1.glb",
"tpd3s716qdbqrq1.step",
"tpd3s716qdbqrq1.lbr",
"docs/hero.png",
"docs/tpd3s716qdbqrq1-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"tpd3s716qdbqrq1-hero.glb",
"tpd3s716qdbqrq1-hero.overlay.json"
],
"visibility": {
"public": true
}
}