main
Ray
Publish 0.1.0
90cdc40
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220
{
"slug": "tpd3s716qdbqrq1",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments Surge Suppressors, SSOP-16-150mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"tvs-fuse-board level protection",
"tpd3s716qdbqrq1",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"tpd3s716qdbqrq1.kicad_sym",
"tpd3s716qdbqrq1.kicad_mod",
"tpd3s716qdbqrq1.glb",
"tpd3s716qdbqrq1.step",
"tpd3s716qdbqrq1.lbr",
"docs/hero.png",
"docs/tpd3s716qdbqrq1-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"tpd3s716qdbqrq1-hero.glb",
"tpd3s716qdbqrq1-hero.overlay.json"
],
"component": {
"mpn": "TPD3S716QDBQRQ1",
"manufacturer": "Texas Instruments",
"package": "SSOP-16-150mil",
"pin_count": 16,
"category": "TVS/Fuse/Board Level Protection",
"subcategory": "Surge Suppressors",
"datasheet": "https://www.ti.com/lit/ds/symlink/tpd3s716-q1.pdf",
"parts": {
"symbol": "tpd3s716qdbqrq1.kicad_sym",
"footprint": "tpd3s716qdbqrq1.kicad_mod",
"model_3d": "tpd3s716qdbqrq1-hero.glb",
"model_3d_step": "tpd3s716qdbqrq1.step",
"lbr": "tpd3s716qdbqrq1.lbr",
"model_3d_plain": "tpd3s716qdbqrq1.glb"
},
"distributor_links": {
"lcsc": "C2649847",
"digikey": "296-44161-2-ND",
"mouser": "595-TPD3S716QDBQRQ1"
},
"distributor_check": {
"checked_at": "2026-11-11T11:08:12Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "296-44161-2-ND",
"status": "found",
"lifecycle": "Active"
},
"mouser": {
"pn": "595-TPD3S716QDBQRQ1",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "NC",
"type": "unconnected",
"description": "No connect; leave floating or connect to ground, and do not connect to VBUS_CON."
},
{
"number": "2",
"name": "VBUS_CON",
"type": "output",
"description": "Connect to USB connector VBUS; provides IEC 61000-4-2 ESD protection, and the pin withstands −0.3 V to 18 V per the absolute maximum ratings."
},
{
"number": "3",
"name": "VBUS_CON",
"type": "output",
"description": "Connect to USB connector VBUS; provides IEC 61000-4-2 ESD protection, and the pin withstands −0.3 V to 18 V per the absolute maximum ratings."
},
{
"number": "4",
"name": "GND",
"type": "power_in",
"description": "Ground; connect to PCB ground plane."
},
{
"number": "5",
"name": "VD–",
"type": "bidirectional",
"description": "Connect to USB connector D-; provides IEC 61000-4-2 ESD protection and is rated −0.3 V to 18 V per the absolute maximum ratings."
},
{
"number": "6",
"name": "VD+",
"type": "bidirectional",
"description": "Connect to USB connector D+; provides IEC 61000-4-2 ESD protection and is rated −0.3 V to 18 V per the absolute maximum ratings."
},
{
"number": "7",
"name": "VEN",
"type": "input",
"description": "Active-low enable input; drive low to enable the VBUS path and high to disable it, with a recommended voltage range of 0 V to 5.9 V."
},
{
"number": "8",
"name": "DEN",
"type": "input",
"description": "Active-low enable input; drive low to enable the data path and high to disable it, with a recommended voltage range of 0 V to 5.9 V."
},
{
"number": "9",
"name": "VIN",
"type": "power_in",
"description": "Connect to 3.3-V I/O; controls the OVP threshold for VD+/VD-, with a recommended supply range of 3 V to 3.6 V."
},
{
"number": "10",
"name": "FLT",
"type": "output",
"description": "Open-drain fault output that is pulled low when a fault occurs; absolute maximum −0.3 V to 7 V and VOL of 0.4 V max at 3 mA."
},
{
"number": "11",
"name": "D+",
"type": "bidirectional",
"description": "Connect to the internal transceiver D+ pin."
},
{
"number": "12",
"name": "D–",
"type": "bidirectional",
"description": "Connect to the internal transceiver D- pin."
},
{
"number": "13",
"name": "GND",
"type": "power_in",
"description": "Ground; connect to PCB ground plane."
},
{
"number": "14",
"name": "VBUS_SYS",
"type": "input",
"description": "Connect to internal VBUS plane; recommended internal supply DC voltage is 4.75 V to 5.9 V."
},
{
"number": "15",
"name": "VBUS_SYS",
"type": "input",
"description": "Connect to internal VBUS plane; recommended internal supply DC voltage is 4.75 V to 5.9 V."
},
{
"number": "16",
"name": "IADJ",
"type": "input",
"description": "Connect to a resistor to GND to set the current limit threshold; RADJ is specified at a minimum of 57 kΩ."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [],
"pages_sent": 33,
"cost_usd": 0.1517,
"at": "2026-11-11T11:08:01"
},
"datasheet": {
"url": "https://www.ti.com/lit/ds/symlink/tpd3s716-q1.pdf",
"pages": 33,
"sha256": "3c73efd1fb7bad2b",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 16,
"described": 16,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "tpd3s716qdbqrq1.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.0,
4.9,
1.85
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "3b55ed1c8dc3eb976cfab8b1e135fd29a17f33ebf575a8a088a30e82c9a5f2ee",
"checked": "2026-11-11",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}