component
TPAX811TS4
Public Made by Adomby adom
TECH PUBLIC Supervisor And Reset ICs, SOT-143. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTPAX811TS4
TECH PUBLIC · Supervisor And Reset ICs · SOT-143
TPAX811TS4 from TECH PUBLIC, in a SOT-143. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground. |
| 2 | ~{RESET} | output | Active-low push-pull reset output that goes low when VCC falls below the reset threshold and stays low for at least 140 ms after VCC rises above the threshold. |
| 3 | ~{MR} | input | Manual reset input, active low, with internal 20kΩ pull-up; reset stays asserted while MR is low and for 140 ms after MR returns high; leave floating if unused, drive with TTL/CMOS logic or short to ground with a switch. |
| 4 | VCC | power_in | Positive supply input, both the operating supply of the internal circuit and the monitored voltage; recommended range 1.0 to 5.5 V, absolute maximum -0.3 to 6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TECH PUBLIC |
| Package | SOT-143 |
| Category | Power Management (PMIC) |
| Pins | 4 |
CAD (KiCad official)
- Symbol:
TPAX811TS4 - Footprint:
Package_TO_SOT_SMD:SOT-143 - 3D model: SOT-143 (KiCad packages3D, STEP)
- 3D model files:
tpax811ts4-etched.step/tpax811ts4-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tpax811ts4.step/tpax811ts4.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TECH PUBLIC datasheet (7 pp, sha256
14b0339d9d4cc862, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).