TPA626-VR-S

{
  "slug": "tpa626-vr-s",
  "version": "0.1.0",
  "type": "component",
  "description": "3PEAK Power Management - Specialized, MSOP-10. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "tpa626-vr-s",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tpa626-vr-s.kicad_sym",
    "tpa626-vr-s.kicad_mod",
    "tpa626-vr-s.glb",
    "tpa626-vr-s.step",
    "tpa626-vr-s.lbr",
    "docs/hero.png",
    "docs/tpa626-vr-s-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tpa626-vr-s-hero.glb",
    "tpa626-vr-s-hero.overlay.json",
    "tpa626-vr-s-etched.glb"
  ],
  "component": {
    "mpn": "TPA626-VR-S",
    "manufacturer": "3PEAK",
    "package": "MSOP-10",
    "pin_count": 10,
    "category": "Power Management (PMIC)",
    "subcategory": "Power Management - Specialized",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590902733245800448",
    "parts": {
      "symbol": "tpa626-vr-s.kicad_sym",
      "footprint": "tpa626-vr-s.kicad_mod",
      "model_3d": "tpa626-vr-s-hero.glb",
      "model_3d_plain": "tpa626-vr-s-etched.glb",
      "model_3d_step": "tpa626-vr-s-etched.step",
      "model_3d_step_plain": "tpa626-vr-s.step",
      "lbr": "tpa626-vr-s.lbr"
    },
    "distributor_links": {
      "lcsc": "C5761471",
      "digikey": "5503-TPA626-VR-STR-ND"
    },
    "distributor_check": {
      "checked_at": "2026-10-17T08:36:13Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "5503-TPA626-VR-STR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "A1",
        "type": "input",
        "description": "Address pin, connect to GND, SCL, SDA, or VS; the device samples A0 and A1 on every bus communication to set the slave address."
      },
      {
        "number": "2",
        "name": "A0",
        "type": "input",
        "description": "Address pin, connect to GND, SCL, SDA, or VS; the device samples A0 and A1 on every bus communication to set the slave address."
      },
      {
        "number": "3",
        "name": "Alert",
        "type": "output",
        "description": "Multi-functional alert, open-drain output; asserted low by default (APOL = 0) and can be configured as active-high via the Mask/Enable register."
      },
      {
        "number": "4",
        "name": "SDA",
        "type": "bidirectional",
        "description": "Serial bus data line, open-drain input/output; absolute maximum voltage is GND - 0.3 V to 6 V."
      },
      {
        "number": "5",
        "name": "SCL",
        "type": "input",
        "description": "Serial bus clock line, open-drain input; logic high input must be at least 0.7 x VVS and low input at most 0.3 x VVS, with absolute maximum GND - 0.3 V to VVS + 0.3 V."
      },
      {
        "number": "6",
        "name": "VS",
        "type": "power_in",
        "description": "Power supply, 2.7 V to 5.5 V."
      },
      {
        "number": "7",
        "name": "GND",
        "type": "power_in",
        "description": "Analog ground."
      },
      {
        "number": "8",
        "name": "VBUS",
        "type": "power_in",
        "description": "Bus voltage input, with a bus voltage input range of 0 V to 36 V and absolute maximum of -0.3 V to 40 V."
      },
      {
        "number": "9",
        "name": "IN-",
        "type": "input",
        "description": "Analog input, connect to load side of shunt resistor; must not exceed the range -0.3 V to 40 V."
      },
      {
        "number": "10",
        "name": "IN+",
        "type": "input",
        "description": "Analog input, connect to supply side of shunt resistor; must not exceed the range -0.3 V to 40 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The pinout is taken from the Pin Functions table on page 4 (pin numbers per the NO. column). The MSO; The datasheet lists only one package for this MPN (MSOP10, order number TPA626-VR-S, tape and reel 3; Pin type for IN+, IN-, and VBUS is given as 'Analog input' and SCL as 'Digital input' in the datashe"
        ],
        "pages_sent": 22,
        "cost_usd": 0.0609,
        "at": "2026-10-17T08:35:13"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590902733245800448",
        "pages": 22,
        "sha256": "9da9bcce79928bc6",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 10,
        "described": 10,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tpa626-vr-s.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b8f88eac3ce221c2ccb0b5048f9ad49c2ef4af148f8ae50c4e232e357683f547",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tpa626-vr-s-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "e6234da7e4eb88749b6996820ebd26c0b773115e4e8464da80754a8f0488c0d5",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}