main
Ray tpa3136d2pwpr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 8381605
{
  "schema_version": 1,
  "type": "component",
  "slug": "tpa3136d2pwpr",
  "title": "TPA3136D2PWPR",
  "brief": "Texas Instruments Audio Amplifiers, HTSSOP-28. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "amplifiers-comparators",
    "tpa3136d2pwpr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "TPA3136D2PWPR",
    "manufacturer": "Texas Instruments",
    "package": "HTSSOP-28",
    "pin_count": 29,
    "category": "Amplifiers/Comparators",
    "subcategory": "Audio Amplifiers",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tpa3136d2",
    "parts": {
      "symbol": "tpa3136d2pwpr.kicad_sym",
      "footprint": "tpa3136d2pwpr.kicad_mod",
      "model_3d": "tpa3136d2pwpr-etched.glb",
      "model_3d_plain": "tpa3136d2pwpr.glb",
      "model_3d_step": "tpa3136d2pwpr-etched.step",
      "model_3d_step_plain": "tpa3136d2pwpr.step",
      "lbr": "tpa3136d2pwpr.lbr"
    },
    "distributor_links": {
      "lcsc": "C527556"
    },
    "pins": [
      {
        "number": "1",
        "name": "SD",
        "type": "input",
        "description": "Shutdown logic input for audio amp (LOW = outputs Hi-Z, HIGH = outputs enabled), TTL logic levels with compliance to AVCC."
      },
      {
        "number": "2",
        "name": "FAULT",
        "type": "tri_state",
        "description": "Open drain output used to display short circuit or dc detect fault status, voltage compliant to AVCC."
      },
      {
        "number": "3",
        "name": "LINP",
        "type": "input",
        "description": "Positive audio input for left channel, biased at 3 V."
      },
      {
        "number": "4",
        "name": "LINN",
        "type": "input",
        "description": "Negative audio input for left channel, biased at 3 V."
      },
      {
        "number": "5",
        "name": "NC",
        "type": "unconnected",
        "description": "No Connect pin, can be shorted to PVCC, shorted to GND, or left open."
      },
      {
        "number": "6",
        "name": "NC",
        "type": "unconnected",
        "description": "No Connect pin, can be shorted to PVCC, shorted to GND, or left open."
      },
      {
        "number": "7",
        "name": "AVCC",
        "type": "power_in",
        "description": "Analog supply voltage."
      },
      {
        "number": "8",
        "name": "GND",
        "type": "power_in",
        "description": "Analog signal ground."
      },
      {
        "number": "9",
        "name": "GVDD",
        "type": "power_out",
        "description": "High-side FET gate drive supply output with nominal voltage of 7 V."
      },
      {
        "number": "10",
        "name": "PLIMIT",
        "type": "input",
        "description": "Power Limiter Control pin, virtual output rail is approximately 4 times the voltage at this pin."
      },
      {
        "number": "11",
        "name": "RINN",
        "type": "input",
        "description": "Negative audio input for right channel, biased at 3 V."
      },
      {
        "number": "12",
        "name": "RINP",
        "type": "input",
        "description": "Positive audio input for right channel, biased at 3 V."
      },
      {
        "number": "13",
        "name": "NC",
        "type": "unconnected",
        "description": "No Connect pin, can be shorted to PVCC, shorted to GND, or left open."
      },
      {
        "number": "14",
        "name": "PBTL",
        "type": "input",
        "description": "Parallel BTL mode select pin: LOW = Stereo BTL mode, HIGH = Mono PBTL mode."
      },
      {
        "number": "15",
        "name": "PVCC",
        "type": "power_in",
        "description": "Power supply for right channel H-bridge, right and left channel power supplies are connected internally."
      },
      {
        "number": "16",
        "name": "PVCC",
        "type": "power_in",
        "description": "Power supply for right channel H-bridge, right and left channel power supplies are connected internally."
      },
      {
        "number": "17",
        "name": "BSPR",
        "type": "bidirectional",
        "description": "Bootstrap input/output for right channel positive high-side FET, connect 0.22 µF capacitor from BSPR to OUTPR."
      },
      {
        "number": "18",
        "name": "OUTPR",
        "type": "output",
        "description": "Class-D H-bridge positive output for right channel."
      },
      {
        "number": "19",
        "name": "GND",
        "type": "power_in",
        "description": "Power ground for the H-bridges."
      },
      {
        "number": "20",
        "name": "OUTNR",
        "type": "output",
        "description": "Class-D H-bridge negative output for right channel."
      },
      {
        "number": "21",
        "name": "BSNR",
        "type": "bidirectional",
        "description": "Bootstrap input/output for right channel negative high-side FET, connect 0.22 µF capacitor from BSNR to OUTNR."
      },
      {
        "number": "22",
        "name": "BSNL",
        "type": "bidirectional",
        "description": "Bootstrap input/output for left channel negative high-side FET, connect 0.22 µF capacitor from BSNL to OUTNL."
      },
      {
        "number": "23",
        "name": "OUTNL",
        "type": "output",
        "description": "Class-D H-bridge negative output for left channel."
      },
      {
        "number": "24",
        "name": "GND",
        "type": "power_in",
        "description": "Power ground for the H-bridges."
      },
      {
        "number": "25",
        "name": "OUTPL",
        "type": "output",
        "description": "Class-D H-bridge positive output for left channel."
      },
      {
        "number": "26",
        "name": "BSPL",
        "type": "bidirectional",
        "description": "Bootstrap input/output for left channel positive high-side FET, connect 0.22 µF capacitor from BSPL to OUTPL."
      },
      {
        "number": "27",
        "name": "PVCC",
        "type": "power_in",
        "description": "Power supply for left channel H-bridge, right and left channel power supplies are connected internally."
      },
      {
        "number": "28",
        "name": "PVCC",
        "type": "power_in",
        "description": "Power supply for left channel H-bridge, right and left channel power supplies are connected internally."
      },
      {
        "number": "29",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: NC pins (5, 6, 13) are specified as user-connectable to PVCC or GND, which is unusual for 'no connec; Bootstrap pins (17, 21, 22, 26) require external 0.22 µF capacitor connections to their correspondin; Thermal pad (PAD) is not part of standard 28-pin numbering but is critical for thermal management; m",
          "exposed pad 29 added from the footprint",
          "dropped thermal pad ['EP'] absent from footprint"
        ],
        "pages_sent": 38,
        "cost_usd": 0.3856,
        "at": "2026-09-24T10:17:41"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tpa3136d2",
        "pages": 38,
        "sha256": "5c11f426fed7ffaf",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 29,
        "described": 29,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tpa3136d2pwpr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.2,
          9.7,
          1.05
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "ff242f1d3be9d09e7f929707a2c5b1ee974a4f882053b04bcdb1cd2cb21223ef",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tpa3136d2pwpr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.2,
          9.7,
          1.05
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "eacd5efe8cde810520c22a573166c208cab4412b84fbc787e95021b5dcd2aeef",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "HTSSOP-28",
      "Category": "Amplifiers/Comparators",
      "Pins": "29"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "tpa3136d2pwpr"
  ],
  "discovery_pitch": "TPA3136D2PWPR (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tpa3136d2pwpr.kicad_sym",
    "tpa3136d2pwpr.kicad_mod",
    "tpa3136d2pwpr.glb",
    "tpa3136d2pwpr.step",
    "tpa3136d2pwpr.lbr",
    "docs/hero.png",
    "docs/tpa3136d2pwpr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  }
}