Generated by kicad-footprint-generator · KiCad file format 20260206
TPA301DR
Texas Instruments · Audio Amplifiers · SOIC-8
TPA301DR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SHUTDOWN | input | SHUTDOWN places the entire device in shutdown mode when held high (IDD ~ 0.15 µA). |
| 2 | BYPASS | passive | BYPASS is the tap to the voltage divider for internal mid-supply bias and should be connected to a 0.1-µF to 1-µF capacitor when used as an audio amplifier. |
| 3 | IN+ | input | IN+ is the noninverting input and is typically tied to the BYPASS terminal. |
| 4 | IN- | input | IN- is the inverting input and is typically used as the audio input terminal. |
| 5 | VO+ | output | VO+ is the positive BTL output. |
| 6 | VDD | power_in | VDD is the supply voltage terminal. |
| 7 | GND | power_in | GND is the ground connection. |
| 8 | VO- | output | VO- is the negative BTL output. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | 6 | V | over operating free-air temperature range (unless otherwise noted) | 2 | ||
| Input voltage | VI | -0.3 | V | over operating free-air temperature range (unless otherwise noted); upper limit printed as VDD + 0.3 V | 2 | ||
| Operating free-air temperature range | TA | -40 | 85 | °C | 2 | ||
| Operating junction temperature range | TJ | -40 | 150 | °C | 2 | ||
| Storage temperature range | Tstg | -65 | 150 | °C | 2 | ||
| Lead temperature | 260 | °C | 1,6 mm (1/16 inch) from case for 10 seconds | 2 | |||
| Supply voltage | VDD | 2.5 | 5.5 | V | 2 | ||
| Operating free-air temperature | TA | -40 | 85 | °C | 2 | ||
| Continuous total power dissipation, package D | 725 | mW | TA ≤ 25°C | 2 | |||
| Continuous total power dissipation, package D | 464 | mW | TA = 70°C | 2 | |||
| Continuous total power dissipation, package D | 377 | mW | TA = 85°C | 2 | |||
| Derating factor, package D | 5.8 | mW/°C | 2 | ||||
| Differential output voltage /VOD/ | /VOD/ | 5 | 20 | mV | VDD = 3.3 V, TA = 25°C; SHUTDOWN = 0 V, RL = 8 Ω, RF = 10 kΩ | 3 | |
| Supply current | IDD | 0.7 | 1.5 | mA | VDD = 3.3 V, TA = 25°C; SHUTDOWN = 0 V, RF = 10 kΩ (see Figure 3) | 3 | |
| Supply current, shutdown mode | IDD(SD) | 0.15 | 5 | µA | VDD = 3.3 V, TA = 25°C; SHUTDOWN = VDD, RF = 10 kΩ (see Figure 4) | 3 | |
| High-level input current SHUTDOWN | /IIH/ | 1 | µA | VDD = 3.3 V, VI = 3.3 V | 3 | ||
| Low-level input current SHUTDOWN | /IIL/ | 1 | µA | VDD = 3.3 V, VI = 0 V | 3 | ||
| Power supply rejection ratio | PSRR | 85 | dB | VDD = 3.2 V to 3.4 V, TA = 25°C | 3 | ||
| Output power | PO | 250 | mW | VDD = 3.3 V, TA = 25°C, RL = 8 Ω, THD = 0.5%, See Figure 9 | 3 | ||
| Total harmonic distortion plus noise | THD + N | 1.3 | % | VDD = 3.3 V, TA = 25°C, RL = 8 Ω, PO = 250 mW, f = 20 Hz to 4 kHz, AV = 2 V/V, See Figure 7 | 3 | ||
| Maximum output power bandwidth | 10 | kHz | VDD = 3.3 V, TA = 25°C, RL = 8 Ω, AV = 2 V/V, THD = 3%, See Figure 7 | 3 | |||
| Unity-gain bandwidth | B1 | 1.4 | MHz | VDD = 3.3 V, TA = 25°C, RL = 8 Ω, open loop, See Figure 15 | 3 | ||
| Supply ripple rejection ratio | 71 | dB | VDD = 3.3 V, TA = 25°C, f = 1 kHz, CB = 1 µF, See Figure 2 | 3 | |||
| Noise output voltage | Vn | 15 | µV(rms) | VDD = 3.3 V, TA = 25°C, AV = 1 V/V, CB = 0.1 µF, RL = 32 Ω, See Figure 19 | 3 | ||
| Power supply rejection ratio | PSRR | 78 | dB | VDD = 4.9 V to 5.1 V, TA = 25°C | 3 | ||
| Output power | PO | 700 | mW | VDD = 5 V, TA = 25°C, RL = 8 Ω, THD = 0.5%, See Figure 13 | 3 | ||
| Total harmonic distortion plus noise | THD + N | 1 | % | VDD = 5 V, TA = 25°C, RL = 8 Ω, PO = 350 mW, f = 20 Hz to 4 kHz, AV = 2 V/V, See Figure 11 | 3 | ||
| Supply ripple rejection ratio | 65 | dB | VDD = 5 V, TA = 25°C, f = 1 kHz, CB = 1 µF, See Figure 2 | 3 |
CAD (KiCad official)
- Symbol:
TPA301DR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
tpa301dr-etched.step/tpa301dr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tpa301dr.step/tpa301dr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (32 pp, sha256
699d7c437595a4f6, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).