component
TP4056EDTR
Public Made by Adomby adom
XBLW TP4056EDTR XBLW Battery Management, ESOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+8−5@@ -38,7 +38,7 @@ "number": "2", "name": "PROG", "type": "bidirectional",- "description": "Charge-current program and monitor pin. Connect a resistor RPROG from PROG to GND to set IBAT = 1000 * VPROG / RPROG (\u00b115%); the pin regulates to ~1V in constant-current mode and ~0.1V in trickle mode, and the voltage across RPROG can be measured to monitor actual charge current."+ "description": "Charge-current program and monitor pin. Connect a resistor RPROG from PROG to GND to set IBAT = 1000 * VPROG / RPROG (±15%); the pin regulates to ~1V in constant-current mode and ~0.1V in trickle mode, and the voltage across RPROG can be measured to monitor actual charge current." }, { "number": "3",@@ -56,19 +56,19 @@ "number": "5", "name": "BAT", "type": "power_out",- "description": "Battery connection. Sources up to ~1A of programmed charge current and regulates the float voltage to 4.2V (\u00b11.5%). BAT leakage is <2uA when the chip is disabled or in sleep mode; abs-max continuous BAT current 1000mA."+ "description": "Battery connection. Sources up to ~1A of programmed charge current and regulates the float voltage to 4.2V (±1.5%). BAT leakage is <2uA when the chip is disabled or in sleep mode; abs-max continuous BAT current 1000mA." }, { "number": "6", "name": "STDBY", "type": "output",- "description": "Open-drain charge-complete indicator (active-low, name is overbarred /STDBY). Pulled low by an internal switch when the charge cycle finishes; high-impedance otherwise. VOL \u2264 0.6V at 5mA sink."+ "description": "Open-drain charge-complete indicator (active-low, name is overbarred /STDBY). Pulled low by an internal switch when the charge cycle finishes; high-impedance otherwise. VOL ≤ 0.6V at 5mA sink." }, { "number": "7", "name": "CHRG", "type": "output",- "description": "Open-drain charge-in-progress indicator (active-low, name is overbarred /CHRG). Pulled low by an internal switch while a charge cycle is active; high-impedance when charging is not in progress. VOL \u2264 0.6V at 5mA sink."+ "description": "Open-drain charge-in-progress indicator (active-low, name is overbarred /CHRG). Pulled low by an internal switch while a charge cycle is active; high-impedance when charging is not in progress. VOL ≤ 0.6V at 5mA sink." }, { "number": "8",@@ -138,5 +138,8 @@ "docs/tp4056edtr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }