component
TP3063
Public Made by Adomby adom
WUXI TOP Triac, SCR Output Optoisolators, DIP-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
TP3063
WUXI TOP · Triac, SCR Output Optoisolators · DIP-6
TP3063 from WUXI TOP, in a DIP-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Anode | passive | Anode of the GaAs infrared LED input; forward current IF max 60 mA, reverse voltage VR max 6 V. |
| 2 | Cathode | passive | Cathode of the GaAs infrared LED input; pins 1, 2 and 3 are shorted together for isolation testing. |
| 3 | NC | unconnected | No connection. |
| 4 | Terminal (MT) | passive | Main output terminal of the zero-crossing triac; off-state voltage VDRM 600 V for TP306X and on-state RMS current IT(RMS) max 100 mA. |
| 5 | NC | unconnected | No connection. |
| 6 | Terminal (MT) | passive | Main output terminal of the zero-crossing triac; off-state voltage VDRM 600 V for TP306X and on-state RMS current IT(RMS) max 100 mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | WUXI TOP |
| Package | DIP-6 |
| Category | Optoisolators |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Forward voltage | VF | 1.23 | 1.5 | V | IF=20mA | 2 | |
| Reverse current | IR | 10 | uA | VR=6V | 2 | ||
| On-state peak voltage | VTM | 3 | V | ITM=100mA peak; IF=Rated IFT | 2 | ||
| Critical rate of rise of off-state voltage (TP306X) | dv/dt | 600 | V/μs | VPEAK=Rated VDRM; IF=0 | 2 | ||
| Inhibit voltage (MT1-MT2 voltage below which device does not trigger) | VInh | 20 | V | IF=Rated IFT | 2 | ||
| Off-state leakage current in inhibit state | IDRM2 | 500 | uA | IF=Rated IFT; VDRM=Rated VDRM; Off state | 2 | ||
| LED trigger current | IFT | 5 | mA | 主端电压=3V | 3 | ||
| Holding current | IH | 280 | uA | 3 | |||
| Creepage distance | L | 7 | mm | 从输入端到输出端，沿本体最短距离路径 | 1 | ||
| Clearance distance | L | 7 | mm | 从输入端到输出端，通过空气的最短距离 | 1 | ||
| Distance through insulation | DTI | 0.4 | mm | 发射器和探测器之间的绝缘厚度 | 1 | ||
| Maximum repetitive peak isolation voltage | VIORM | 1500 | Vpeak | DIN/EN/IEC EN 60747-5-5 | 1 | ||
| Maximum transient isolation voltage | VIOM | 7000 | Vpeak | DIN/EN/IEC EN 60747-5-5 | 1 | ||
| Isolation voltage (insulation table) | VISO | 5000 | Vrms | 60 秒 | 1 | ||
| Forward current | IF | 60 | mA | Ta=25℃ | 2 | ||
| Reverse voltage | VR | 6 | V | Ta=25℃ | 2 | ||
| Power dissipation (emitter) | PD | 100 | mW | Ta=25℃ | 2 | ||
| Derating factor (emitter) | PDD | 3.8 | mW/°C | Ta above 85°C | 2 | ||
| Repetitive peak off-state voltage (TP306X) | VDRM | 600 | V | Ta=25℃ | 2 | ||
| Peak repetitive surge current | ITSM | 1 | A | pw=100μs, 120pps | 2 | ||
| On-state RMS current | IT(RMS) | 100 | mA | Ta=25℃ | 2 | ||
| Power dissipation (detector) | PC | 300 | mW | Ta=25℃ | 2 | ||
| Derating factor (detector) | PC | 7.6 | mW/°C | Ta above 90°C | 2 | ||
| Total power dissipation | Ptot | 330 | mW | Ta=25℃ | 2 | ||
| Isolation voltage (ratings table) | Viso | 5000 | V | Ta=25℃ | 2 | ||
| Operating temperature | Topr | -55 | 110 | ℃ | 2 | ||
| Storage temperature | Tstg | -55 | 125 | ℃ | 2 | ||
| Soldering temperature | Tsol | 260 | ℃ | 2 |
CAD (KiCad official)
- Symbol:
TP3063 - Footprint:
Package_DIP:DIP-6_W7.62mm - 3D model: DIP-6 (KiCad packages3D, STEP)
- 3D model files:
tp3063-etched.step/tp3063-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tp3063.step/tp3063.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: WUXI TOP datasheet (7 pp, sha256
bfe5e0a46b76c44e, retrieved 2026-10-13, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TP3063
**WUXI TOP** · Triac, SCR Output Optoisolators · DIP-6
TP3063 from WUXI TOP, in a DIP-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Anode | passive | Anode of the GaAs infrared LED input; forward current IF max 60 mA, reverse voltage VR max 6 V. |
| 2 | Cathode | passive | Cathode of the GaAs infrared LED input; pins 1, 2 and 3 are shorted together for isolation testing. |
| 3 | NC | unconnected | No connection. |
| 4 | Terminal (MT) | passive | Main output terminal of the zero-crossing triac; off-state voltage VDRM 600 V for TP306X and on-state RMS current IT(RMS) max 100 mA. |
| 5 | NC | unconnected | No connection. |
| 6 | Terminal (MT) | passive | Main output terminal of the zero-crossing triac; off-state voltage VDRM 600 V for TP306X and on-state RMS current IT(RMS) max 100 mA. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | WUXI TOP |
| Package | DIP-6 |
| Category | Optoisolators |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Forward voltage | VF | | 1.23 | 1.5 | V | IF=20mA | 2 |
| Reverse current | IR | | | 10 | uA | VR=6V | 2 |
| On-state peak voltage | VTM | | | 3 | V | ITM=100mA peak; IF=Rated IFT | 2 |
| Critical rate of rise of off-state voltage (TP306X) | dv/dt | 600 | | | V/μs | VPEAK=Rated VDRM; IF=0 | 2 |
| Inhibit voltage (MT1-MT2 voltage below which device does not trigger) | VInh | | | 20 | V | IF=Rated IFT | 2 |
| Off-state leakage current in inhibit state | IDRM2 | | | 500 | uA | IF=Rated IFT; VDRM=Rated VDRM; Off state | 2 |
| LED trigger current | IFT | | | 5 | mA | 主端电压=3V | 3 |
| Holding current | IH | | | 280 | uA | | 3 |
| Creepage distance | L | 7 | | | mm | 从输入端到输出端，沿本体最短距离路径 | 1 |
| Clearance distance | L | 7 | | | mm | 从输入端到输出端，通过空气的最短距离 | 1 |
| Distance through insulation | DTI | 0.4 | | | mm | 发射器和探测器之间的绝缘厚度 | 1 |
| Maximum repetitive peak isolation voltage | VIORM | | | 1500 | Vpeak | DIN/EN/IEC EN 60747-5-5 | 1 |
| Maximum transient isolation voltage | VIOM | | | 7000 | Vpeak | DIN/EN/IEC EN 60747-5-5 | 1 |
| Isolation voltage (insulation table) | VISO | 5000 | | | Vrms | 60 秒 | 1 |
| Forward current | IF | | | 60 | mA | Ta=25℃ | 2 |
| Reverse voltage | VR | | | 6 | V | Ta=25℃ | 2 |
| Power dissipation (emitter) | PD | | | 100 | mW | Ta=25℃ | 2 |
| Derating factor (emitter) | PDD | | | 3.8 | mW/°C | Ta above 85°C | 2 |
| Repetitive peak off-state voltage (TP306X) | VDRM | | | 600 | V | Ta=25℃ | 2 |
| Peak repetitive surge current | ITSM | | | 1 | A | pw=100μs, 120pps | 2 |
| On-state RMS current | IT(RMS) | | | 100 | mA | Ta=25℃ | 2 |
| Power dissipation (detector) | PC | | | 300 | mW | Ta=25℃ | 2 |
| Derating factor (detector) | PC | | | 7.6 | mW/°C | Ta above 90°C | 2 |
| Total power dissipation | Ptot | | | 330 | mW | Ta=25℃ | 2 |
| Isolation voltage (ratings table) | Viso | | | 5000 | V | Ta=25℃ | 2 |
| Operating temperature | Topr | -55 | | 110 | ℃ | | 2 |
| Storage temperature | Tstg | -55 | | 125 | ℃ | | 2 |
| Soldering temperature | Tsol | | | 260 | ℃ | | 2 |
## CAD (KiCad official)
- Symbol: `TP3063`
- Footprint: `Package_DIP:DIP-6_W7.62mm`
- 3D model: DIP-6 (KiCad packages3D, STEP)
- 3D model files: `tp3063-etched.step` / `tp3063-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tp3063.step` / `tp3063.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [WUXI TOP datasheet](docs/tp3063-datasheet.pdf) (7 pp, sha256 `bfe5e0a46b76c44e`, retrieved 2026-10-13, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tp3063-datasheet.pdf)