component
TP2414-SR
Public Made by Adomby adom
3PEAK Operational Amplifier, SOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTP2414-SR
3PEAK · Operational Amplifier · SOP-14
TP2414-SR from 3PEAK, in a SOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Out A | output | Amplifier A output; the voltage range extends to within a value printed as 'mV' (number missing in the source text) of each supply rail. |
| 2 | -In A | input | Inverting input of amplifier A; if the input extends more than 500 mV beyond the supply, the input current should be limited to less than 10 mA. |
| 3 | +In A | input | Non-inverting input of amplifier A; if the input extends more than 500 mV beyond the supply, the input current should be limited to less than 10 mA. |
| 4 | +Vs | power_in | Positive power supply, typically 2.2 V to 5.5 V; place a 0.1 µF bypass capacitor as close to the part as possible. |
| 5 | +In B | input | Non-inverting input of amplifier B; if the input extends more than 500 mV beyond the supply, the input current should be limited to less than 10 mA. |
| 6 | -In B | input | Inverting input of amplifier B; if the input extends more than 500 mV beyond the supply, the input current should be limited to less than 10 mA. |
| 7 | Out B | output | Amplifier B output; the voltage range extends to within a value printed as 'mV' (number missing in the source text) of each supply rail. |
| 8 | Out C | output | Amplifier C output; the voltage range extends to within a value printed as 'mV' (number missing in the source text) of each supply rail. |
| 9 | -In C | input | Inverting input of amplifier C; if the input extends more than 500 mV beyond the supply, the input current should be limited to less than 10 mA. |
| 10 | +In C | input | Non-inverting input of amplifier C; if the input extends more than 500 mV beyond the supply, the input current should be limited to less than 10 mA. |
| 11 | -Vs | power_in | Negative power supply, normally tied to ground; the V+ to V- span must stay between 2.2 V and 5.5 V, and bypass with 0.1 µF if not connected to ground. |
| 12 | +In D | input | Non-inverting input of amplifier D; if the input extends more than 500 mV beyond the supply, the input current should be limited to less than 10 mA. |
| 13 | -In D | input | Inverting input of amplifier D; if the input extends more than 500 mV beyond the supply, the input current should be limited to less than 10 mA. |
| 14 | Out D | output | Amplifier D output; the voltage range extends to within a value printed as 'mV' (number missing in the source text) of each supply rail. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | 3PEAK |
| Package | SOP-14 |
| Category | Amplifiers/Comparators |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage (VCM = VS/2) | VOS | -1 | 0.25 | 1 | mV | VCM = VS/2 | 3 |
| Input Offset Voltage (VCM = 0V) | VOS | -1 | 0.25 | 1 | mV | VCM = 0V | 3 |
| Common Mode Rejection Ratio | CMRR | 90 | 106 | dB | VCM = 2.5V | 3 | |
| Common Mode Rejection Ratio | CMRR | 80 | 106 | dB | VCM = 0V to 3V | 3 | |
| Common Mode Rejection Ratio | CMRR | 55 | 72 | dB | VCM = 0V to 5V | 3 | |
| Common-mode Input Voltage Range (referenced to V-) | VCM | -0.1 | V | 3 | |||
| Power Supply Rejection Ratio | PSRR | 82 | 100 | dB | VS = 2.2V to 5.5V, VCM = 0V | 3 | |
| Open-Loop Large Signal Gain | AVOL | 100 | 120 | dB | RLOAD = 2kΩ, VOUT = -2V to 2V | 3 | |
| Output Swing from Supply Rail | VOL, VOH | 20 | 50 | mV | RLOAD = 2kΩ | 3 | |
| Output Short-Circuit Current | ISC | 100 | 130 | mA | Sink or source current | 3 | |
| Supply Voltage | VS | 2.2 | 5.5 | V | 3 | ||
| Quiescent Current per Amplifier | IQ | 1.4 | 1.95 | mA | VS = 5V | 3 | |
| Slew Rate | SR | 3 | 7 | V/μs | AV = 1, VOUT = 0V to 10V, CLOAD = 100pF, RLOAD = 2kΩ | 3 | |
| Supply Voltage (V+, V-) | V+, V- | 7 | V | 2 | |||
| Input Voltage (referenced to V-) | -0.3 | V | 2 | ||||
| Input Current (+IN, -IN) | -20 | 20 | mA | Note 3 | 2 | ||
| Current at Supply Pins | -60 | 60 | mA | 2 | |||
| Operating Temperature Range | -40 | 125 | °C | 2 | |||
| Maximum Junction Temperature | 150 | °C | 2 | ||||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature (Soldering) | 260 | °C | Soldering, 10 sec | 2 | |||
| ESD Human Body Model minimum level | HBM | 2 | kV | MIL-STD-883H Method 3015.8 | 2 | ||
| ESD Charged Device Model minimum level | CDM | 1 | kV | JEDEC-EIA/JESD22-C101E | 2 | ||
| Thermal Resistance Junction-to-Ambient (14-Pin SOP) | θJA | 120 | °C/W | 2 | |||
| Thermal Resistance Junction-to-Case (14-Pin SOP) | θJC | 36 | °C/W | 2 |
CAD (KiCad official)
- Symbol:
TP2414-SR - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOP-14 (KiCad packages3D, STEP)
- 3D model files:
tp2414-sr-etched.step/tp2414-sr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tp2414-sr.step/tp2414-sr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: 3PEAK datasheet (17 pp, sha256
4bf08b0bc2f5e752, retrieved 2026-10-20, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).