TNY276PN

{
 "schema": "adom.pads/1",
 "slug": "tny276pn",
 "footprint": "DIP-8_W7.62mm",
 "generated_from": {
  "footprint": "DIP-8_W7.62mm@sha256:222fb44370968119",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   0.0,
   0.0
  ],
  "corner": "bottom-right",
  "source": "fab-chamfer",
  "derived_from": "DIP-8_W7.62mm@sha256:222fb44370968119"
 },
 "pad_count": 8,
 "symbol_pins": [
  "1",
  "2",
  "4",
  "5",
  "6",
  "7",
  "8"
 ],
 "paste_apertures": 0,
 "issues": [
  {
   "kind": "pad-has-no-pin",
   "pad": "3",
   "thermal": false,
   "described_in_page": false,
   "detail": "footprint pad \"3\" is in copper but the SYMBOL has no pin for it"
  }
 ],
 "pads": [
  {
   "pad": "1",
   "kind": "thru_hole",
   "shape": "roundrect",
   "at": [
    0.0,
    0.0
   ],
   "rot": 0.0,
   "size": [
    1.6,
    1.6
   ],
   "layers": [],
   "thermal": false,
   "pin": "1",
   "name": "EN/UV",
   "type": "input",
   "description": "Enable / Line Under-Voltage sense input. Dual-function pin: a low-impedance source-follower (~1.2 V) whose current is compared to a ~115 uA threshold to enable/disable MOSFET switching (typically driven by an optocoupler), and a line under-voltage sense input that measures current (~25 uA start / ~1 uA disable) from an external resistor to the DC bulk to inhibit switching under low-line conditions.",
   "is_pin1": true,
   "source": {
    "geometry": "DIP-8_W7.62mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "thru_hole",
   "shape": "circle",
   "at": [
    0.0,
    2.54
   ],
   "rot": 0.0,
   "size": [
    1.6,
    1.6
   ],
   "layers": [],
   "thermal": false,
   "pin": "2",
   "name": "BP/M",
   "type": "power_in",
   "description": "Bypass / Multi-Function pin. Connection for the external bypass capacitor of the internally generated 5.85 V supply; capacitor value (0.1 uF / 1 uF / 10 uF) also selects the current-limit mode. A 6.4 V shunt clamp allows external biasing via a bias winding, and shutdown latches when the current into this pin exceeds 5.5 mA (releases when BP/M drops below 4.9 V).",
   "is_pin1": false,
   "source": {
    "geometry": "DIP-8_W7.62mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "thru_hole",
   "shape": "circle",
   "at": [
    0.0,
    5.08
   ],
   "rot": 0.0,
   "size": [
    1.6,
    1.6
   ],
   "layers": [],
   "thermal": false,
   "pin": "3",
   "name": null,
   "type": null,
   "description": null,
   "is_pin1": false,
   "source": {
    "geometry": "DIP-8_W7.62mm.kicad_mod",
    "meaning": null,
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "4",
   "kind": "thru_hole",
   "shape": "circle",
   "at": [
    0.0,
    7.62
   ],
   "rot": 0.0,
   "size": [
    1.6,
    1.6
   ],
   "layers": [],
   "thermal": false,
   "pin": "4",
   "name": "D",
   "type": "power_in",
   "description": "DRAIN pin - connection to the drain of the internal 700 V power MOSFET. Also provides the internal operating current for start-up and steady-state operation via the high-voltage switched current source.",
   "is_pin1": false,
   "source": {
    "geometry": "DIP-8_W7.62mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "5",
   "kind": "thru_hole",
   "shape": "circle",
   "at": [
    7.62,
    7.62
   ],
   "rot": 0.0,
   "size": [
    1.6,
    1.6
   ],
   "layers": [],
   "thermal": false,
   "pin": "5",
   "name": "S",
   "type": "power_in",
   "description": "SOURCE pin - internally connected to the power MOSFET source. Serves as the high-voltage power return and control-circuit common. Multiple source pins (5-8) are tied internally and used to improve heatsinking to the PCB while providing extended creepage from the DRAIN pin.",
   "is_pin1": false,
   "source": {
    "geometry": "DIP-8_W7.62mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "6",
   "kind": "thru_hole",
   "shape": "circle",
   "at": [
    7.62,
    5.08
   ],
   "rot": 0.0,
   "size": [
    1.6,
    1.6
   ],
   "layers": [],
   "thermal": false,
   "pin": "6",
   "name": "S",
   "type": "power_in",
   "description": "SOURCE pin - internally connected to the power MOSFET source. Serves as the high-voltage power return and control-circuit common. Multiple source pins (5-8) are tied internally and used to improve heatsinking to the PCB.",
   "is_pin1": false,
   "source": {
    "geometry": "DIP-8_W7.62mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "7",
   "kind": "thru_hole",
   "shape": "circle",
   "at": [
    7.62,
    2.54
   ],
   "rot": 0.0,
   "size": [
    1.6,
    1.6
   ],
   "layers": [],
   "thermal": false,
   "pin": "7",
   "name": "S",
   "type": "power_in",
   "description": "SOURCE pin - internally connected to the power MOSFET source. Serves as the high-voltage power return and control-circuit common. Multiple source pins (5-8) are tied internally and used to improve heatsinking to the PCB.",
   "is_pin1": false,
   "source": {
    "geometry": "DIP-8_W7.62mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "8",
   "kind": "thru_hole",
   "shape": "circle",
   "at": [
    7.62,
    0.0
   ],
   "rot": 0.0,
   "size": [
    1.6,
    1.6
   ],
   "layers": [],
   "thermal": false,
   "pin": "8",
   "name": "S",
   "type": "power_in",
   "description": "SOURCE pin - internally connected to the power MOSFET source. Serves as the high-voltage power return and control-circuit common. Multiple source pins (5-8) are tied internally and used to improve heatsinking to the PCB.",
   "is_pin1": false,
   "source": {
    "geometry": "DIP-8_W7.62mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}