Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TNY253PN

POWER INTEGRATIONS · AC-DC Controllers & Regulators · DIP-8

TNY253PN from POWER INTEGRATIONS, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 BYPASS passive Connection point for an external 0.1 µF bypass capacitor on the internally generated 5.8 V supply, and not intended for sourcing supply current to external circuitry.
2 SOURCE power_in Power MOSFET source connection and primary return, with all SOURCE pins tied to the single point ground.
3 SOURCE power_in Power MOSFET source connection and primary return, with all SOURCE pins tied to the single point ground.
4 ENABLE input Pulling this pin low terminates power MOSFET switching; its I-V characteristic is a voltage source of about 1.5 V with a source current clamp of 50 µA.
5 DRAIN passive Power MOSFET drain connection (700 V rated) that provides internal operating current for both start-up and steady-state operation.
6 SOURCE power_in Power MOSFET source connection and primary return, with all SOURCE pins tied to the single point ground.
7 SOURCE power_in Power MOSFET source connection and primary return, with all SOURCE pins tied to the single point ground.
8 SOURCE power_in Power MOSFET source connection and primary return, with all SOURCE pins tied to the single point ground.

Key specifications

Parameter Value
Manufacturer POWER INTEGRATIONS
Package DIP-8
Category Power Supply Chip
Pins 8

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper pins are soldered to sufficient copper area to keep the die 8

CAD (KiCad official)

  • Symbol: TNY253PN
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: DIP-8 (KiCad packages3D, STEP)
  • 3D model files: tny253pn-etched.step / tny253pn-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tny253pn.step / tny253pn.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: POWER INTEGRATIONS datasheet (18 pp, sha256 3379a6ee36a47fe1, retrieved 2026-10-28, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF