component
TMUX7208PWR
Public Made by Adomby adom
Texas Instruments Analog Switches, Multiplexers, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTMUX7208PWR
Texas Instruments · Analog Switches, Multiplexers · TSSOP-16
TMUX7208PWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | input | Logic control input with internal 4MΩ pull-down resistor; controls the switch configuration as shown in Section 8.5. |
| 2 | EN | input | Active high logic enable with internal 4MΩ pull-down resistor; when low, all switches are turned off; when high, Ax logic input determines which switch is turned on. |
| 3 | VSS | power_in | Negative power supply; the most negative power-supply potential; in single-supply applications can be connected to ground; connect 0.1μF to 10μF decoupling capacitor between VSS and GND. |
| 4 | S1 | bidirectional | Source pin 1; can be an input or output. |
| 5 | S2 | bidirectional | Source pin 2; can be an input or output. |
| 6 | S3 | bidirectional | Source pin 3; can be an input or output. |
| 7 | S4 | bidirectional | Source pin 4; can be an input or output. |
| 8 | D | bidirectional | Drain pin; can be an input or output. |
| 9 | S8 | bidirectional | Source pin 8; can be an input or output. |
| 10 | S7 | bidirectional | Source pin 7; can be an input or output. |
| 11 | S6 | bidirectional | Source pin 6; can be an input or output. |
| 12 | S5 | bidirectional | Source pin 5; can be an input or output. |
| 13 | VDD | power_in | Positive power supply; the most positive power-supply potential; connect 0.1μF to 10μF decoupling capacitor between VDD and GND. |
| 14 | GND | power_in | Ground (0V) reference. |
| 15 | A2 | input | Logic control input with internal 4MΩ pull-down resistor; controls the switch configuration as shown in Section 8.5. |
| 16 | A1 | input | Logic control input with internal 4MΩ pull-down resistor; controls the switch configuration as shown in Section 8.5. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-16 |
| Category | Interface |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
TMUX7208PWR - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
tmux7208pwr-etched.step/tmux7208pwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tmux7208pwr.step/tmux7208pwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (51 pp, sha256
270e3fc4a0434610, retrieved 2026-10-06, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).