TMUX154EDGSR

{
  "slug": "tmux154edgsr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Analog Switches, Multiplexers, MSOP-10. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface",
    "tmux154edgsr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tmux154edgsr.kicad_sym",
    "tmux154edgsr.kicad_mod",
    "tmux154edgsr.glb",
    "tmux154edgsr.step",
    "tmux154edgsr.lbr",
    "docs/hero.png",
    "docs/tmux154edgsr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tmux154edgsr-hero.glb",
    "tmux154edgsr-hero.overlay.json",
    "tmux154edgsr-etched.glb"
  ],
  "component": {
    "mpn": "TMUX154EDGSR",
    "manufacturer": "Texas Instruments",
    "package": "MSOP-10",
    "pin_count": 10,
    "category": "Interface",
    "subcategory": "Analog Switches, Multiplexers",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tmux154e",
    "parts": {
      "symbol": "tmux154edgsr.kicad_sym",
      "footprint": "tmux154edgsr.kicad_mod",
      "model_3d": "tmux154edgsr-hero.glb",
      "model_3d_plain": "tmux154edgsr-etched.glb",
      "model_3d_step": "tmux154edgsr-etched.step",
      "model_3d_step_plain": "tmux154edgsr.step",
      "lbr": "tmux154edgsr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2870320",
      "digikey": "296-48347-2-ND"
    },
    "distributor_check": {
      "checked_at": "2026-10-17T11:32:49Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-48347-2-ND",
        "status": "found"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "SEL",
        "type": "input",
        "description": "Select input: SEL = 0 connects A and B to A0 and B0, SEL = 1 connects A and B to A1 and B1; the datasheet recommends pulling SEL to VCC or GND so it does not float."
      },
      {
        "number": "2",
        "name": "A0",
        "type": "bidirectional",
        "description": "Signal path port 0 I/O, which is bidirectional and has a signal-path I/O voltage limit of VCC + 0.3 V when VCC > 0 V."
      },
      {
        "number": "3",
        "name": "A1",
        "type": "bidirectional",
        "description": "Signal path port 1 I/O, which is bidirectional and has a signal-path I/O voltage limit of VCC + 0.3 V when VCC > 0 V."
      },
      {
        "number": "4",
        "name": "A",
        "type": "bidirectional",
        "description": "Common signal path I/O, which connects to either A0 or A1 depending on SEL, with a continuous ON-state switch current limit of ±64 mA."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device; all voltages are referenced to ground."
      },
      {
        "number": "6",
        "name": "B",
        "type": "bidirectional",
        "description": "Common signal path I/O, which connects to either B0 or B1 depending on SEL, with a continuous ON-state switch current limit of ±64 mA."
      },
      {
        "number": "7",
        "name": "B1",
        "type": "bidirectional",
        "description": "Signal path port 1 I/O, which is bidirectional and has a signal-path I/O voltage limit of 5.25 V when VCC = 0 V."
      },
      {
        "number": "8",
        "name": "B0",
        "type": "bidirectional",
        "description": "Signal path port 0 I/O, which is bidirectional and has a signal-path I/O voltage limit of 5.25 V when VCC = 0 V."
      },
      {
        "number": "9",
        "name": "EN",
        "type": "input",
        "description": "Enable input: EN = 0 enables the switch and EN = 1 disables it (high impedance); control inputs support 1.8 V logic and the recommended high-level input at VCC = 4.3 V is 1.7 V minimum."
      },
      {
        "number": "10",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage, recommended 3 V to 4.3 V with an absolute maximum of 7 V, and a bypass capacitor should be placed as close to this pin as possible."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet names this package VSSOP (DGS), 10-pin, not MSOP-10. The ordering table lists TMUX154E; Pin types use the datasheet's I/O designation for signal paths, mapped to KiCad bidirectional. EN an"
        ],
        "pages_sent": 29,
        "cost_usd": 0.0832,
        "at": "2026-10-17T11:31:42"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tmux154e",
        "pages": 29,
        "sha256": "dc95c0efe58b55d7",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 10,
        "described": 10,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tmux154edgsr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b8f88eac3ce221c2ccb0b5048f9ad49c2ef4af148f8ae50c4e232e357683f547",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tmux154edgsr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "65fd0b82bc7edc0bf7492d8e7d1dd6a0bf9dff3f8dad6d98c343f524b05268e2",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}