component
TMUX1309PWR
Public Made by Adomby adom
Texas Instruments Analog Switches, Multiplexers, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTMUX1309PWR
Texas Instruments · Analog Switches, Multiplexers · TSSOP-16
TMUX1309PWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S0B | bidirectional | Source pin 0 of mux B, can be input or output |
| 2 | S2B | bidirectional | Source pin 2 of mux B, can be input or output |
| 3 | DB | bidirectional | Drain pin (common) of mux B, can be input or output |
| 4 | S3B | bidirectional | Source pin 3 of mux B, can be input or output |
| 5 | S1B | bidirectional | Source pin 1 of mux B, can be input or output |
| 6 | EN | input | Active low logic input; when high all switches are off, when low address inputs determine which switch is on |
| 7 | N.C. | unconnected | Not internally connected |
| 8 | GND | power_in | Ground (0 V) reference |
| 9 | A1 | input | Address line 1, controls switch configuration per Table 9-2 |
| 10 | A0 | input | Address line 0, controls switch configuration per Table 9-2 |
| 11 | S3A | bidirectional | Source pin 3 of mux A, can be input or output |
| 12 | S0A | bidirectional | Source pin 0 of mux A, can be input or output |
| 13 | DA | bidirectional | Drain pin (common) of mux A, can be input or output |
| 14 | S1A | bidirectional | Source pin 1 of mux A, can be input or output |
| 15 | S2A | bidirectional | Source pin 2 of mux A, can be input or output |
| 16 | VDD | power_in | Positive power supply requiring 0.1 µF to 10 µF decoupling capacitor between VDD and GND |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-16 |
| Category | Interface |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
TMUX1309PWR - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
tmux1309pwr-etched.step/tmux1309pwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tmux1309pwr.step/tmux1309pwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (46 pp, sha256
9a123a5f68937572, retrieved 2026-09-24, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).