main
Ray
Publish 0.1.0
1677779
TMUX1309APWR
Texas Instruments · IC · TSSOP-16
TMUX1309APWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S0B | bidirectional | Source pin 0 of mux B; signal path can be an input or output. |
| 2 | S2B | bidirectional | Source pin 2 of mux B; signal path can be an input or output. |
| 3 | DB | bidirectional | Drain pin (common) of mux B; signal path can be an input or output. |
| 4 | S3B | bidirectional | Source pin 3 of mux B; signal path can be an input or output. |
| 5 | S1B | bidirectional | Source pin 1 of mux B; signal path can be an input or output. |
| 6 | EN | input | Active-low logic input: when high all switches are turned off, when low the A[1:0] address inputs determine which switch is turned on. |
| 7 | N.C. | unconnected | Not internally connected. |
| 8 | GND | power_in | Ground (0V) reference. |
| 9 | A1 | input | Address line 1 that controls the switch configuration per the truth table. |
| 10 | A0 | input | Address line 0 that controls the switch configuration per the truth table. |
| 11 | S3A | bidirectional | Source pin 3 of mux A; signal path can be an input or output. |
| 12 | S0A | bidirectional | Source pin 0 of mux A; signal path can be an input or output. |
| 13 | DA | bidirectional | Drain pin (common) of mux A; signal path can be an input or output. |
| 14 | S1A | bidirectional | Source pin 1 of mux A; signal path can be an input or output. |
| 15 | S2A | bidirectional | Source pin 2 of mux A; signal path can be an input or output. |
| 16 | VDD | power_in | Positive power supply, the most positive supply potential; connect a 0.1µF to 10µF decoupling capacitor between VDD and GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-16 |
| Category | |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | -0.5 | 6 | V | 8 | ||
| Logic control input pin voltage (EN, A0, A1) | VSEL or VEN | -0.5 | 6 | V | 8 | ||
| Source or drain voltage | VS or VD | -0.5 | 1 | V | Max printed as VDD+1.0 (value is the +1.0 V offset above VDD) | 8 | |
| Logic control input pin current | ISEL or IEN | -30 | 30 | mA | 8 | ||
| Continuous current through switch | IS or ID (CONT) | -50 | 50 | mA | -40°C to +85°C | 8 | |
| Continuous current through switch | IS or ID (CONT) | -25 | 25 | mA | -40°C to +125°C | 8 | |
| Continuous current through GND | IGND | -100 | 100 | mA | 8 | ||
| Total power dissipation | Ptot | 500 | mW | TSSOP derates above TA = 80°C by 7.2mW/°C | 8 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 8 | ||
| Junction temperature | TJ | 150 | °C | 8 | |||
| ESD HBM | V(ESD) | -2000 | 2000 | V | HBM, ANSI/ESDA/JEDEC JS-001, all pins | 8 | |
| ESD CDM | V(ESD) | -750 | 750 | V | CDM, JESD22-C101 or JS-002, all pins | 8 | |
| Junction-to-ambient thermal resistance | RθJA | 139 | °C/W | PW (TSSOP), TMUX1309 | 9 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 77.2 | °C/W | PW (TSSOP), TMUX1309 | 9 | ||
| Junction-to-board thermal resistance | RθJB | 84.2 | °C/W | PW (TSSOP), TMUX1309 | 9 | ||
| Junction-to-top characterization parameter | ΨJT | 26.5 | °C/W | PW (TSSOP), TMUX1309 | 9 | ||
| Junction-to-board characterization parameter | ΨJB | 83.8 | °C/W | PW (TSSOP), TMUX1309 | 9 | ||
| Supply voltage | VDD | 1.62 | 5.5 | V | 9 | ||
| Signal path input/output voltage | VS or VD | 0 | V | Sx, D; max printed as VDD | 9 | ||
| Logic control input pin voltage | VSEL or VEN | 0 | 5.5 | V | EN, A0, A1 | 9 | |
| Continuous current through switch | IS or ID (CONT) | -50 | 50 | mA | -40°C to +85°C | 9 | |
| Continuous current through switch | IS or ID (CONT) | -25 | 25 | mA | -40°C to +125°C | 9 | |
| Current per input into source or drain pins when signal voltage exceeds recommended operating voltage | IOK | -50 | 50 | mA | 9 | ||
| Injected current into single off switch input | IINJ | -50 | 50 | mA | 9 | ||
| Total injected current into all off switch inputs combined | IINJ_ALL | -100 | 100 | mA | 9 | ||
| Ambient temperature | TA | -40 | 125 | °C | 9 | ||
| On-state switch resistance | RON | 650 | 1700 | Ω | VS = 0V to VDD, ISD = 0.5mA, VDD = 1.8V; typ at 25°C, max -40°C to 125°C | 10 | |
| On-state switch resistance | RON | 230 | 670 | Ω | VS = 0V to VDD, ISD = 0.5mA, VDD = 2.5V; typ at 25°C, max -40°C to 125°C | 10 | |
| On-state switch resistance | RON | 120 | 370 | Ω | VS = 0V to VDD, ISD = 0.5mA, VDD = 3.3V; typ at 25°C, max -40°C to 125°C | 10 | |
| On-state switch resistance | RON | 75 | 270 | Ω | VS = 0V to VDD, ISD = 0.5mA, VDD = 5V; typ at 25°C, max -40°C to 125°C | 10 | |
| On-state switch resistance matching between inputs | ΔRON | 10 | 45 | Ω | VS = VDD / 2, ISD = 0.5mA, VDD = 1.8V; max -40°C to 125°C | 10 | |
| On-state switch resistance matching between inputs | ΔRON | 3 | 22 | Ω | VS = VDD / 2, ISD = 0.5mA, VDD = 2.5V; max -40°C to 125°C | 10 | |
| On-state switch resistance matching between inputs | ΔRON | 2 | 15 | Ω | VS = VDD / 2, ISD = 0.5mA, VDD = 3.3V; max -40°C to 125°C | 10 | |
| On-state switch resistance matching between inputs | ΔRON | 1 | 14 | Ω | VS = VDD / 2, ISD = 0.5mA, VDD = 5V; max -40°C to 125°C | 10 | |
| Source off-state leakage current | IS(OFF) | -25 | 25 | nA | Switch Off, VD = 0.8 x VDD/ 0.2 x VDD, VS = 0.2 x VDD/ 0.8 x VDD, all VDD; -40°C to 85°C | 10 | |
| Source off-state leakage current | IS(OFF) | -800 | 800 | nA | Switch Off, VD = 0.8 x VDD/ 0.2 x VDD, VS = 0.2 x VDD/ 0.8 x VDD, all VDD; -40°C to 125°C | 10 | |
| Drain off-state leakage current (common drain pin) | ID(OFF) | -45 | 45 | nA | Switch Off, VD = 0.8 x VDD/ 0.2 x VDD, VS = 0.2 x VDD/ 0.8 x VDD, all VDD; -40°C to 85°C | 10 | |
| Drain off-state leakage current (common drain pin) | ID(OFF) | -800 | 800 | nA | Switch Off, VD = 0.8 x VDD/ 0.2 x VDD, VS = 0.2 x VDD/ 0.8 x VDD, all VDD; -40°C to 125°C | 10 | |
| Channel on-state leakage current | ID(ON), IS(ON) | -45 | 45 | nA | Switch On, VD = VS = 0.8 x VDD or VD = VS = 0.2 x VDD, all VDD; -40°C to 85°C | 10 | |
| Channel on-state leakage current | ID(ON), IS(ON) | -800 | 800 | nA | Switch On, VD = VS = 0.8 x VDD or VD = VS = 0.2 x VDD, all VDD; -40°C to 125°C | 10 | |
| Source off capacitance | CSOFF | 2 | 14 | pF | VS = VDD / 2, f = 1MHz, all VDD | 10 | |
| Drain off capacitance | CDOFF | 7 | 37 | pF | VS = VDD / 2, f = 1MHz, all VDD | 10 | |
| On capacitance | CSON, CDON | 11 | 40 | pF | VS = VDD / 2, f = 1MHz, all VDD | 10 | |
| VDD supply current | IDD | 1 | 1.2 | µA | Logic inputs = 0V or VDD, VDD = 1.8V; max -40°C to 125°C | 10 | |
| VDD supply current | IDD | 1 | 1.5 | µA | Logic inputs = 0V or VDD, VDD = 2.5V; max -40°C to 125°C | 10 | |
| VDD supply current | IDD | 1 | 2 | µA | Logic inputs = 0V or VDD, VDD = 3.3V; max -40°C to 125°C | 10 | |
| VDD supply current | IDD | 1 | 3 | µA | Logic inputs = 0V or VDD, VDD = 5V; max -40°C to 125°C | 10 | |
| Input logic high | VIH | 0.95 | 5.5 | V | VDD = 1.8V, -40°C to 125°C | 11 | |
| Input logic high | VIH | 1.25 | 5.5 | V | VDD = 5V, -40°C to 125°C | 11 | |
| Input logic low | VIL | 0 | 0.6 | V | VDD = 1.8V, -40°C to 125°C | 11 | |
| Input logic low | VIL | 0 | 0.95 | V | VDD = 5V, -40°C to 125°C | 11 | |
| Logic high input leakage current | IIH | 1 | uA | VLOGIC = 1.8V or VDD, All VDD | 11 | ||
| Logic low input leakage current | IIL | -1 | uA | VLOGIC = 0V, All VDD | 11 | ||
| Logic input capacitance | CIN | 1 | 2 | pF | VLOGIC = 0V, 1.8V, VDD, f = 1MHz, All VDD | 11 | |
| Charge injection | QINJ | -1.5 | pC | VS = VDD / 2, RS = 0Ω, CL = 100pF, VDD = 5V | 11 | ||
| Bandwidth | BW | 500 | MHz | VBIAS = VDD / 2, VS = 200mVpp, RL = 50Ω, CL = 5pF, VDD = 5V | 11 | ||
| Propagation delay | tPD | 15 | 30 | ns | CL = 50pF, Sx to D, D to Sx, VDD = 1.8V; max -40°C to 125°C | 12 | |
| Propagation delay | tPD | 4 | 10 | ns | CL = 50pF, Sx to D, D to Sx, VDD = 5V; max -40°C to 125°C | 12 | |
| Transition-time between inputs | tTRAN | 44 | 103 | ns | RL = 10kΩ, CL = 50pF, Ax to D, Ax to Sx, VDD = 1.8V; max -40°C to 125°C | 12 | |
| Transition-time between inputs | tTRAN | 18 | 46 | ns | RL = 10kΩ, CL = 50pF, Ax to D, Ax to Sx, VDD = 5V; max -40°C to 125°C | 12 | |
| Turnon-time from enable | tON(EN) | 39 | 75 | ns | RL = 10kΩ, CL = 50pF, EN to D, EN to Sx, VDD = 1.8V; max -40°C to 125°C | 12 | |
| Turnon-time from enable | tON(EN) | 24 | 37 | ns | RL = 10kΩ, CL = 50pF, EN to D, EN to Sx, VDD = 5V; max -40°C to 125°C | 12 | |
| Turnoff time from enable | tOFF(EN) | 60 | 85 | ns | RL = 10kΩ, CL = 50pF, EN to D, EN to Sx, VDD = 1.8V; max -40°C to 125°C | 12 | |
| Turnoff time from enable | tOFF(EN) | 28 | 55 | ns | RL = 10kΩ, CL = 50pF, EN to D, EN to Sx, VDD = 5V; max -40°C to 125°C | 12 | |
| Break before make time | tBBM | 1 | 16 | ns | RL = 10kΩ, CL = 15pF, Sx to D, D to Sx, VDD = 1.8V | 12 | |
| Break before make time | tBBM | 1 | 33 | ns | RL = 10kΩ, CL = 15pF, Sx to D, D to Sx, VDD = 5V | 12 |
CAD (KiCad official)
- Symbol:
TMUX1309APWR - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
tmux1309apwr-etched.step/tmux1309apwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tmux1309apwr.step/tmux1309apwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (51 pp, sha256
f7c7ee336fa1da1e, retrieved 2026-10-27, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TMUX1309APWR
**Texas Instruments** · IC · TSSOP-16
TMUX1309APWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S0B | bidirectional | Source pin 0 of mux B; signal path can be an input or output. |
| 2 | S2B | bidirectional | Source pin 2 of mux B; signal path can be an input or output. |
| 3 | DB | bidirectional | Drain pin (common) of mux B; signal path can be an input or output. |
| 4 | S3B | bidirectional | Source pin 3 of mux B; signal path can be an input or output. |
| 5 | S1B | bidirectional | Source pin 1 of mux B; signal path can be an input or output. |
| 6 | EN | input | Active-low logic input: when high all switches are turned off, when low the A[1:0] address inputs determine which switch is turned on. |
| 7 | N.C. | unconnected | Not internally connected. |
| 8 | GND | power_in | Ground (0V) reference. |
| 9 | A1 | input | Address line 1 that controls the switch configuration per the truth table. |
| 10 | A0 | input | Address line 0 that controls the switch configuration per the truth table. |
| 11 | S3A | bidirectional | Source pin 3 of mux A; signal path can be an input or output. |
| 12 | S0A | bidirectional | Source pin 0 of mux A; signal path can be an input or output. |
| 13 | DA | bidirectional | Drain pin (common) of mux A; signal path can be an input or output. |
| 14 | S1A | bidirectional | Source pin 1 of mux A; signal path can be an input or output. |
| 15 | S2A | bidirectional | Source pin 2 of mux A; signal path can be an input or output. |
| 16 | VDD | power_in | Positive power supply, the most positive supply potential; connect a 0.1µF to 10µF decoupling capacitor between VDD and GND. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-16 |
| Category | |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | -0.5 | | 6 | V | | 8 |
| Logic control input pin voltage (EN, A0, A1) | VSEL or VEN | -0.5 | | 6 | V | | 8 |
| Source or drain voltage | VS or VD | -0.5 | | 1 | V | Max printed as VDD+1.0 (value is the +1.0 V offset above VDD) | 8 |
| Logic control input pin current | ISEL or IEN | -30 | | 30 | mA | | 8 |
| Continuous current through switch | IS or ID (CONT) | -50 | | 50 | mA | -40°C to +85°C | 8 |
| Continuous current through switch | IS or ID (CONT) | -25 | | 25 | mA | -40°C to +125°C | 8 |
| Continuous current through GND | IGND | -100 | | 100 | mA | | 8 |
| Total power dissipation | Ptot | | | 500 | mW | TSSOP derates above TA = 80°C by 7.2mW/°C | 8 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 8 |
| Junction temperature | TJ | | | 150 | °C | | 8 |
| ESD HBM | V(ESD) | -2000 | | 2000 | V | HBM, ANSI/ESDA/JEDEC JS-001, all pins | 8 |
| ESD CDM | V(ESD) | -750 | | 750 | V | CDM, JESD22-C101 or JS-002, all pins | 8 |
| Junction-to-ambient thermal resistance | RθJA | | 139 | | °C/W | PW (TSSOP), TMUX1309 | 9 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 77.2 | | °C/W | PW (TSSOP), TMUX1309 | 9 |
| Junction-to-board thermal resistance | RθJB | | 84.2 | | °C/W | PW (TSSOP), TMUX1309 | 9 |
| Junction-to-top characterization parameter | ΨJT | | 26.5 | | °C/W | PW (TSSOP), TMUX1309 | 9 |
| Junction-to-board characterization parameter | ΨJB | | 83.8 | | °C/W | PW (TSSOP), TMUX1309 | 9 |
| Supply voltage | VDD | 1.62 | | 5.5 | V | | 9 |
| Signal path input/output voltage | VS or VD | 0 | | | V | Sx, D; max printed as VDD | 9 |
| Logic control input pin voltage | VSEL or VEN | 0 | | 5.5 | V | EN, A0, A1 | 9 |
| Continuous current through switch | IS or ID (CONT) | -50 | | 50 | mA | -40°C to +85°C | 9 |
| Continuous current through switch | IS or ID (CONT) | -25 | | 25 | mA | -40°C to +125°C | 9 |
| Current per input into source or drain pins when signal voltage exceeds recommended operating voltage | IOK | -50 | | 50 | mA | | 9 |
| Injected current into single off switch input | IINJ | -50 | | 50 | mA | | 9 |
| Total injected current into all off switch inputs combined | IINJ_ALL | -100 | | 100 | mA | | 9 |
| Ambient temperature | TA | -40 | | 125 | °C | | 9 |
| On-state switch resistance | RON | | 650 | 1700 | Ω | VS = 0V to VDD, ISD = 0.5mA, VDD = 1.8V; typ at 25°C, max -40°C to 125°C | 10 |
| On-state switch resistance | RON | | 230 | 670 | Ω | VS = 0V to VDD, ISD = 0.5mA, VDD = 2.5V; typ at 25°C, max -40°C to 125°C | 10 |
| On-state switch resistance | RON | | 120 | 370 | Ω | VS = 0V to VDD, ISD = 0.5mA, VDD = 3.3V; typ at 25°C, max -40°C to 125°C | 10 |
| On-state switch resistance | RON | | 75 | 270 | Ω | VS = 0V to VDD, ISD = 0.5mA, VDD = 5V; typ at 25°C, max -40°C to 125°C | 10 |
| On-state switch resistance matching between inputs | ΔRON | | 10 | 45 | Ω | VS = VDD / 2, ISD = 0.5mA, VDD = 1.8V; max -40°C to 125°C | 10 |
| On-state switch resistance matching between inputs | ΔRON | | 3 | 22 | Ω | VS = VDD / 2, ISD = 0.5mA, VDD = 2.5V; max -40°C to 125°C | 10 |
| On-state switch resistance matching between inputs | ΔRON | | 2 | 15 | Ω | VS = VDD / 2, ISD = 0.5mA, VDD = 3.3V; max -40°C to 125°C | 10 |
| On-state switch resistance matching between inputs | ΔRON | | 1 | 14 | Ω | VS = VDD / 2, ISD = 0.5mA, VDD = 5V; max -40°C to 125°C | 10 |
| Source off-state leakage current | IS(OFF) | -25 | | 25 | nA | Switch Off, VD = 0.8 x VDD/ 0.2 x VDD, VS = 0.2 x VDD/ 0.8 x VDD, all VDD; -40°C to 85°C | 10 |
| Source off-state leakage current | IS(OFF) | -800 | | 800 | nA | Switch Off, VD = 0.8 x VDD/ 0.2 x VDD, VS = 0.2 x VDD/ 0.8 x VDD, all VDD; -40°C to 125°C | 10 |
| Drain off-state leakage current (common drain pin) | ID(OFF) | -45 | | 45 | nA | Switch Off, VD = 0.8 x VDD/ 0.2 x VDD, VS = 0.2 x VDD/ 0.8 x VDD, all VDD; -40°C to 85°C | 10 |
| Drain off-state leakage current (common drain pin) | ID(OFF) | -800 | | 800 | nA | Switch Off, VD = 0.8 x VDD/ 0.2 x VDD, VS = 0.2 x VDD/ 0.8 x VDD, all VDD; -40°C to 125°C | 10 |
| Channel on-state leakage current | ID(ON), IS(ON) | -45 | | 45 | nA | Switch On, VD = VS = 0.8 x VDD or VD = VS = 0.2 x VDD, all VDD; -40°C to 85°C | 10 |
| Channel on-state leakage current | ID(ON), IS(ON) | -800 | | 800 | nA | Switch On, VD = VS = 0.8 x VDD or VD = VS = 0.2 x VDD, all VDD; -40°C to 125°C | 10 |
| Source off capacitance | CSOFF | | 2 | 14 | pF | VS = VDD / 2, f = 1MHz, all VDD | 10 |
| Drain off capacitance | CDOFF | | 7 | 37 | pF | VS = VDD / 2, f = 1MHz, all VDD | 10 |
| On capacitance | CSON, CDON | | 11 | 40 | pF | VS = VDD / 2, f = 1MHz, all VDD | 10 |
| VDD supply current | IDD | | 1 | 1.2 | µA | Logic inputs = 0V or VDD, VDD = 1.8V; max -40°C to 125°C | 10 |
| VDD supply current | IDD | | 1 | 1.5 | µA | Logic inputs = 0V or VDD, VDD = 2.5V; max -40°C to 125°C | 10 |
| VDD supply current | IDD | | 1 | 2 | µA | Logic inputs = 0V or VDD, VDD = 3.3V; max -40°C to 125°C | 10 |
| VDD supply current | IDD | | 1 | 3 | µA | Logic inputs = 0V or VDD, VDD = 5V; max -40°C to 125°C | 10 |
| Input logic high | VIH | 0.95 | | 5.5 | V | VDD = 1.8V, -40°C to 125°C | 11 |
| Input logic high | VIH | 1.25 | | 5.5 | V | VDD = 5V, -40°C to 125°C | 11 |
| Input logic low | VIL | 0 | | 0.6 | V | VDD = 1.8V, -40°C to 125°C | 11 |
| Input logic low | VIL | 0 | | 0.95 | V | VDD = 5V, -40°C to 125°C | 11 |
| Logic high input leakage current | IIH | | | 1 | uA | VLOGIC = 1.8V or VDD, All VDD | 11 |
| Logic low input leakage current | IIL | -1 | | | uA | VLOGIC = 0V, All VDD | 11 |
| Logic input capacitance | CIN | | 1 | 2 | pF | VLOGIC = 0V, 1.8V, VDD, f = 1MHz, All VDD | 11 |
| Charge injection | QINJ | | -1.5 | | pC | VS = VDD / 2, RS = 0Ω, CL = 100pF, VDD = 5V | 11 |
| Bandwidth | BW | | 500 | | MHz | VBIAS = VDD / 2, VS = 200mVpp, RL = 50Ω, CL = 5pF, VDD = 5V | 11 |
| Propagation delay | tPD | | 15 | 30 | ns | CL = 50pF, Sx to D, D to Sx, VDD = 1.8V; max -40°C to 125°C | 12 |
| Propagation delay | tPD | | 4 | 10 | ns | CL = 50pF, Sx to D, D to Sx, VDD = 5V; max -40°C to 125°C | 12 |
| Transition-time between inputs | tTRAN | | 44 | 103 | ns | RL = 10kΩ, CL = 50pF, Ax to D, Ax to Sx, VDD = 1.8V; max -40°C to 125°C | 12 |
| Transition-time between inputs | tTRAN | | 18 | 46 | ns | RL = 10kΩ, CL = 50pF, Ax to D, Ax to Sx, VDD = 5V; max -40°C to 125°C | 12 |
| Turnon-time from enable | tON(EN) | | 39 | 75 | ns | RL = 10kΩ, CL = 50pF, EN to D, EN to Sx, VDD = 1.8V; max -40°C to 125°C | 12 |
| Turnon-time from enable | tON(EN) | | 24 | 37 | ns | RL = 10kΩ, CL = 50pF, EN to D, EN to Sx, VDD = 5V; max -40°C to 125°C | 12 |
| Turnoff time from enable | tOFF(EN) | | 60 | 85 | ns | RL = 10kΩ, CL = 50pF, EN to D, EN to Sx, VDD = 1.8V; max -40°C to 125°C | 12 |
| Turnoff time from enable | tOFF(EN) | | 28 | 55 | ns | RL = 10kΩ, CL = 50pF, EN to D, EN to Sx, VDD = 5V; max -40°C to 125°C | 12 |
| Break before make time | tBBM | 1 | 16 | | ns | RL = 10kΩ, CL = 15pF, Sx to D, D to Sx, VDD = 1.8V | 12 |
| Break before make time | tBBM | 1 | 33 | | ns | RL = 10kΩ, CL = 15pF, Sx to D, D to Sx, VDD = 5V | 12 |
## CAD (KiCad official)
- Symbol: `TMUX1309APWR`
- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`
- 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files: `tmux1309apwr-etched.step` / `tmux1309apwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tmux1309apwr.step` / `tmux1309apwr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/tmux1309a.pdf) (51 pp, sha256 `f7c7ee336fa1da1e`, retrieved 2026-10-27, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tmux1309apwr-datasheet.pdf)