3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTMUX1308APWR
Texas Instruments · Analog Switches, Multiplexers · TSSOP-16
TMUX1308APWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S4 | bidirectional | Source pin 4; the signal path can be an input or output. |
| 2 | S6 | bidirectional | Source pin 6; the signal path can be an input or output. |
| 3 | D | bidirectional | Drain pin (common); the signal path can be an input or output. |
| 4 | S7 | bidirectional | Source pin 7; the signal path can be an input or output. |
| 5 | S5 | bidirectional | Source pin 5; the signal path can be an input or output. |
| 6 | EN | input | Active-low logic input: when high, all switches are turned off, and when low, the A[2:0] address inputs determine which switch is on. |
| 7 | N.C. | unconnected | Not internally connected. |
| 8 | GND | power_in | Ground (0 V) reference. |
| 9 | A2 | input | Address line 2; controls the switch configuration as listed in Section 8.5. |
| 10 | A1 | input | Address line 1; controls the switch configuration as listed in Section 8.5. |
| 11 | A0 | input | Address line 0; controls the switch configuration as listed in Section 8.5. |
| 12 | S3 | bidirectional | Source pin 3; the signal path can be an input or output. |
| 13 | S0 | bidirectional | Source pin 0; the signal path can be an input or output. |
| 14 | S1 | bidirectional | Source pin 1; the signal path can be an input or output. |
| 15 | S2 | bidirectional | Source pin 2; the signal path can be an input or output. |
| 16 | VDD | power_in | Positive power supply, the most positive power-supply potential; for reliable operation, connect a decoupling capacitor from 0.1 µF to 10 µF between VDD and GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-16 |
| Category | Interface |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (absolute maximum) | VDD | -0.5 | 6 | V | Over operating free-air temperature range | 8 | |
| Logic control input pin voltage (EN, A0, A1, A2) | VSEL or VEN | -0.5 | 6 | V | Over operating free-air temperature range | 8 | |
| Source or drain voltage (Sx, D); printed max VDD+1.0 | VS or VD | -0.5 | V | Over operating free-air temperature range; max printed as VDD+1.0 | 8 | ||
| Logic control input pin current (EN, A0, A1, A2) | ISEL or IEN | -30 | 30 | mA | Over operating free-air temperature range | 8 | |
| Continuous current through switch (Sx, D pins) | IS or ID (CONT) | -50 | 50 | mA | -40°C to +85°C | 8 | |
| Continuous current through switch (Sx, D pins) | IS or ID (CONT) | -25 | 25 | mA | -40°C to +125°C | 8 | |
| Continuous current through GND | IGND | -100 | 100 | mA | 8 | ||
| Total power dissipation | Ptot | 500 | mW | TSSOP package; derates linearly above TA = 80°C by 7.2 mW/°C | 8 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 8 | ||
| Junction temperature | TJ | 150 | °C | 8 | |||
| Supply voltage | VDD | 1.62 | 5.5 | V | Over operating free-air temperature range | 9 | |
| Signal path input/output voltage (source or drain pin) | VS or VD | 0 | V | Max printed as VDD | 9 | ||
| Logic control input pin voltage (EN, A0, A1, A2) | VSEL or VEN | 0 | 5.5 | V | 9 | ||
| Continuous current through switch (Sx, D pins) | IS or ID (CONT) | -50 | 50 | mA | -40°C to +85°C | 9 | |
| Continuous current through switch (Sx, D pins) | IS or ID (CONT) | -25 | 25 | mA | -40°C to +125°C | 9 | |
| Current per input into source or drain pins when signal voltage exceeds recommended operating voltage | IOK | -50 | 50 | mA | 9 | ||
| Injected current into single off switch input | IINJ | -50 | 50 | mA | 9 | ||
| Total injected current into all off switch inputs combined | IINJ_ALL | -100 | 100 | mA | 9 | ||
| Ambient temperature | TA | -40 | 125 | °C | 9 | ||
| On-state switch resistance | RON | 650 | 1500 | Ω | VDD = 1.8V, VS = 0V to VDD, ISD = 0.5mA, TA = 25°C | 10 | |
| On-state switch resistance | RON | 230 | 600 | Ω | VDD = 2.5V, VS = 0V to VDD, ISD = 0.5mA, TA = 25°C | 10 | |
| On-state switch resistance | RON | 120 | 330 | Ω | VDD = 3.3V, VS = 0V to VDD, ISD = 0.5mA, TA = 25°C | 10 | |
| On-state switch resistance | RON | 75 | 195 | Ω | VDD = 5V, VS = 0V to VDD, ISD = 0.5mA, TA = 25°C | 10 | |
| On-state switch resistance | RON | 1700 | Ω | VDD = 1.8V, VS = 0V to VDD, ISD = 0.5mA, -40°C to 125°C | 10 | ||
| On-state switch resistance | RON | 670 | Ω | VDD = 2.5V, VS = 0V to VDD, ISD = 0.5mA, -40°C to 125°C | 10 | ||
| On-state switch resistance | RON | 370 | Ω | VDD = 3.3V, VS = 0V to VDD, ISD = 0.5mA, -40°C to 125°C | 10 | ||
| On-state switch resistance | RON | 270 | Ω | VDD = 5V, VS = 0V to VDD, ISD = 0.5mA, -40°C to 125°C | 10 | ||
| On-state switch resistance matching between inputs | ΔRON | 45 | Ω | VDD = 1.8V, VS = VDD/2, ISD = 0.5mA, -40°C to 125°C | 10 | ||
| On-state switch resistance matching between inputs | ΔRON | 22 | Ω | VDD = 2.5V, VS = VDD/2, ISD = 0.5mA, -40°C to 125°C | 10 | ||
| On-state switch resistance matching between inputs | ΔRON | 15 | Ω | VDD = 3.3V, VS = VDD/2, ISD = 0.5mA, -40°C to 125°C | 10 | ||
| On-state switch resistance matching between inputs | ΔRON | 14 | Ω | VDD = 5V, VS = VDD/2, ISD = 0.5mA, -40°C to 125°C | 10 | ||
| Source off-state leakage current | IS(OFF) | -25 | 25 | nA | VDD = 1.8V, switch off, VD = 0.8 x VDD/0.2 x VDD, VS = 0.2 x VDD/0.8 x VDD, TA = 25°C | 10 | |
| Source off-state leakage current | IS(OFF) | -800 | 800 | nA | VDD = 1.8V, switch off, -40°C to 125°C | 10 | |
| Drain off-state leakage current (common drain pin) | ID(OFF) | -45 | 45 | nA | VDD = 1.8V, switch off, VD = 0.8 x VDD/0.2 x VDD, VS = 0.2 x VDD/0.8 x VDD, TA = 25°C | 10 | |
| Drain off-state leakage current (common drain pin) | ID(OFF) | -800 | 800 | nA | VDD = 1.8V, switch off, -40°C to 125°C | 10 | |
| Source off capacitance | CSOFF | 2 | 14 | pF | VDD = 5V, VS = VDD/2, f = 1MHz | 10 | |
| Drain off capacitance | CDOFF | 7 | 37 | pF | VDD = 5V, VS = VDD/2, f = 1MHz | 10 | |
| On capacitance | CSON, CDON | 11 | 40 | pF | VDD = 5V, VS = VDD/2, f = 1MHz | 10 | |
| VDD supply current | IDD | 1.2 | µA | VDD = 1.8V, logic inputs = 0V or VDD | 10 | ||
| VDD supply current | IDD | 3 | µA | VDD = 5V, logic inputs = 0V or VDD | 10 | ||
| Input logic high | VIH | 0.95 | 5.5 | V | VDD = 1.8V | 11 | |
| Input logic high | VIH | 1.25 | 5.5 | V | VDD = 5V | 11 | |
| Input logic low | VIL | 0 | 0.6 | V | VDD = 1.8V | 11 | |
| Input logic low | VIL | 0 | 0.95 | V | VDD = 5V | 11 | |
| Logic high input leakage current | IIH | 1 | uA | VLOGIC = 1.8V or VDD, all voltages | 11 | ||
| Logic low input leakage current | IIL | -1 | uA | VLOGIC = 0V, all voltages | 11 | ||
| Logic input capacitance | CIN | 1 | 2 | pF | VLOGIC = 0V, 1.8V, VDD, f = 1MHz | 11 | |
| Propagation delay Sx to D, D to Sx | tPD | 30 | ns | VDD = 1.8V, CL = 50pF, -40°C to 125°C | 12 | ||
| Propagation delay Sx to D, D to Sx | tPD | 10 | ns | VDD = 5V, CL = 50pF, -40°C to 125°C | 12 | ||
| Turnon-time from enable EN to D, EN to Sx | tON(EN) | 75 | ns | VDD = 1.8V, RL = 10kΩ, CL = 50pF, -40°C to 125°C | 12 | ||
| Turnon-time from enable EN to D, EN to Sx | tON(EN) | 37 | ns | VDD = 5V, RL = 10kΩ, CL = 50pF, -40°C to 125°C | 12 | ||
| Turnoff time from enable EN to D, EN to Sx | tOFF(EN) | 85 | ns | VDD = 1.8V, RL = 10kΩ, CL = 50pF, -40°C to 125°C | 12 | ||
| Turnoff time from enable EN to D, EN to Sx | tOFF(EN) | 55 | ns | VDD = 5V, RL = 10kΩ, CL = 50pF, -40°C to 125°C | 12 | ||
| Junction-to-ambient thermal resistance (PW TSSOP) | RθJA | 139 | °C/W | TMUX1308A PW (TSSOP) package | 9 | ||
| Junction-to-case (top) thermal resistance (PW TSSOP) | RθJC(top) | 77.2 | °C/W | TMUX1308A PW (TSSOP) package | 9 | ||
| Junction-to-board thermal resistance (PW TSSOP) | RθJB | 84.2 | °C/W | TMUX1308A PW (TSSOP) package | 9 |
CAD (KiCad official)
- Symbol:
TMUX1308APWR - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
tmux1308apwr-etched.step/tmux1308apwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tmux1308apwr.step/tmux1308apwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (51 pp, sha256
f7c7ee336fa1da1e, retrieved 2026-10-18, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).