TMS8010DP-TR

{
  "slug": "tms8010dp-tr",
  "version": "0.1.0",
  "type": "component",
  "description": "TMI Audio Amplifiers, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "amplifiers-comparators",
    "tms8010dp-tr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tms8010dp-tr.kicad_sym",
    "tms8010dp-tr.kicad_mod",
    "tms8010dp-tr.glb",
    "tms8010dp-tr.step",
    "tms8010dp-tr.lbr",
    "docs/hero.png",
    "docs/tms8010dp-tr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tms8010dp-tr-hero.glb",
    "tms8010dp-tr-hero.overlay.json",
    "tms8010dp-tr-etched.glb"
  ],
  "component": {
    "mpn": "TMS8010DP-TR",
    "manufacturer": "TMI",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "Amplifiers/Comparators",
    "subcategory": "Audio Amplifiers",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8604446347530039296",
    "parts": {
      "symbol": "tms8010dp-tr.kicad_sym",
      "footprint": "tms8010dp-tr.kicad_mod",
      "model_3d": "tms8010dp-tr-hero.glb",
      "model_3d_plain": "tms8010dp-tr-etched.glb",
      "model_3d_step": "tms8010dp-tr-etched.step",
      "model_3d_step_plain": "tms8010dp-tr.step",
      "lbr": "tms8010dp-tr.lbr"
    },
    "distributor_links": {
      "lcsc": "C29779846"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T11:01:30Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "CTRL",
        "type": "input",
        "description": "Control terminal for one-wire mode selection and shutdown: high (power-on default) selects Class-D with NCN1, and logic low held for more than 10 ms shuts the amplifier down, with VIH min 1.4 V and VIL max 1.0 V at VDD=5 V."
      },
      {
        "number": "2",
        "name": "BYP",
        "type": "passive",
        "description": "Internal reference voltage bypass pin, which should have a 1.0 µF capacitor to GND; this capacitor sets the start-up rate and reduces power-supply noise coupling into the output."
      },
      {
        "number": "3",
        "name": "IN+",
        "type": "input",
        "description": "Positive differential input whose gain is set by the internal input and 155 kΩ feedback resistors (Gain = 2×155k/Ri), with 2 V/V or lower recommended and input voltage limited to -0.3 V to VDD+0.3 V."
      },
      {
        "number": "4",
        "name": "IN-",
        "type": "input",
        "description": "Negative differential input paired with IN+, with the same internal gain setting and input voltage limit of -0.3 V to VDD+0.3 V."
      },
      {
        "number": "5",
        "name": "OUT-",
        "type": "output",
        "description": "Negative BTL (bridge-tied load) output driving the speaker together with OUT+, with a minimum output impedance rating of 3.0 Ω stated in the absolute maximum ratings."
      },
      {
        "number": "6",
        "name": "VDD",
        "type": "power_in",
        "description": "Power supply input, recommended 2.5 V to 6.0 V with an absolute maximum of 6.5 V, to be decoupled with a ceramic capacitor (typically 1 µF) close to the pin plus a 10 µF or larger capacitor."
      },
      {
        "number": "7",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device."
      },
      {
        "number": "8",
        "name": "OUT+",
        "type": "output",
        "description": "Positive BTL (bridge-tied load) output driving the speaker together with OUT-, with a minimum output impedance rating of 3.0 Ω stated in the absolute maximum ratings."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Page 2 top-view pin diagram text is garbled and its pin-number order (CTRL, BYP, VDD, OUT+, IN+, IN-; The Figure 1 application circuit pin labels are also garbled in the text extraction, so they were no; The datasheet lists the BYP pin as 'Thins Pin' with a 1.0 µF capacitor in the pin table and 1 µF in "
        ],
        "pages_sent": 15,
        "cost_usd": 0.0541,
        "at": "2026-10-18T10:59:02"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8604446347530039296",
        "pages": 15,
        "sha256": "2e490339a66c0f89",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tms8010dp-tr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tms8010dp-tr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "69c50ec72c2cbec4633d7d0e3d5ce163d7201d669bbf930cd69b077f3a23fe82",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}