component
TMS320F2809PZA
Public Made by Adomby adom
Texas Instruments Microcontrollers (MCU/MPU/SOC), LQFP-100(14x14). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+11−8@@ -262,19 +262,19 @@ "number": "36", "name": "ADCREFM", "type": "output",- "description": "ADC internal reference medium output requiring low ESR ceramic bypass capacitor (2.2 \u03bcF, <1.5 \u03a9) to analog ground."+ "description": "ADC internal reference medium output requiring low ESR ceramic bypass capacitor (2.2 μF, <1.5 Ω) to analog ground." }, { "number": "37", "name": "ADCREFP", "type": "output",- "description": "ADC internal reference positive output requiring low ESR ceramic bypass capacitor (2.2 \u03bcF, <1.5 \u03a9) to analog ground."+ "description": "ADC internal reference positive output requiring low ESR ceramic bypass capacitor (2.2 μF, <1.5 Ω) to analog ground." }, { "number": "38", "name": "ADCRESEXT", "type": "passive",- "description": "ADC external current bias resistor pin; connect 22-k\u03a9 resistor to analog ground."+ "description": "ADC external current bias resistor pin; connect 22-kΩ resistor to analog ground." }, { "number": "39",@@ -442,7 +442,7 @@ "number": "66", "name": "XCLKOUT", "type": "output",- "description": "Output clock derived from SYSCLKOUT with programmable division (\u00f71, \u00f72, \u00f74) or disable; can be turned off by register control."+ "description": "Output clock derived from SYSCLKOUT with programmable division (÷1, ÷2, ÷4) or disable; can be turned off by register control." }, { "number": "67",@@ -526,13 +526,13 @@ "number": "80", "name": "EMU0", "type": "bidirectional",- "description": "Emulator pin 0 with 8 mA drive and internal pullup; used as emulator interrupt or for boundary-scan mode entry when combined with EMU1; external pullup resistor (2.2-4.7 k\u03a9) recommended."+ "description": "Emulator pin 0 with 8 mA drive and internal pullup; used as emulator interrupt or for boundary-scan mode entry when combined with EMU1; external pullup resistor (2.2-4.7 kΩ) recommended." }, { "number": "81", "name": "EMU1", "type": "bidirectional",- "description": "Emulator pin 1 with 8 mA drive and internal pullup; used as emulator interrupt or for boundary-scan mode entry when combined with EMU0; external pullup resistor (2.2-4.7 k\u03a9) recommended."+ "description": "Emulator pin 1 with 8 mA drive and internal pullup; used as emulator interrupt or for boundary-scan mode entry when combined with EMU0; external pullup resistor (2.2-4.7 kΩ) recommended." }, { "number": "82",@@ -550,7 +550,7 @@ "number": "84", "name": "TRST", "type": "input",- "description": "JTAG test reset with internal pulldown; active-high test pin, must be maintained low during normal operation; external pulldown resistor (2.2 k\u03a9 typical) required."+ "description": "JTAG test reset with internal pulldown; active-high test pin, must be maintained low during normal operation; external pulldown resistor (2.2 kΩ typical) required." }, { "number": "85",@@ -726,5 +726,8 @@ "docs/tms320f2809pza-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }