← Commit history

tms320f2808pza: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·9fc7038870 · ·parent 6aca1d2
2 files changed +90−10
package.json+48−8
@@ -263,19 +263,19 @@         "number": "36",         "name": "ADCREFM",         "type": "output",-        "description": "Internal ADC reference medium output requiring 2.2 \u03bcF low-ESR ceramic bypass capacitor to analog ground."+        "description": "Internal ADC reference medium output requiring 2.2 μF low-ESR ceramic bypass capacitor to analog ground."       },       {         "number": "37",         "name": "ADCREFP",         "type": "output",-        "description": "Internal ADC reference positive output requiring 2.2 \u03bcF low-ESR ceramic bypass capacitor to analog ground."+        "description": "Internal ADC reference positive output requiring 2.2 μF low-ESR ceramic bypass capacitor to analog ground."       },       {         "number": "38",         "name": "ADCRESEXT",         "type": "passive",-        "description": "ADC external current bias resistor connection; connect 22-k\u03a9 resistor to analog ground."+        "description": "ADC external current bias resistor connection; connect 22-kΩ resistor to analog ground."       },       {         "number": "39",@@ -527,13 +527,13 @@         "number": "80",         "name": "EMU0",         "type": "bidirectional",-        "description": "Emulator pin 0; when TRST is driven high, used as interrupt to/from emulator system and defined as input/output through JTAG scan; with EMU0 high and EMU1 low, rising edge on TRST latches device into boundary-scan mode; requires external pullup resistor (2.2 k\u03a9 to 4.7 k\u03a9 recommended); tri-state capable with 8-mA drive."+        "description": "Emulator pin 0; when TRST is driven high, used as interrupt to/from emulator system and defined as input/output through JTAG scan; with EMU0 high and EMU1 low, rising edge on TRST latches device into boundary-scan mode; requires external pullup resistor (2.2 kΩ to 4.7 kΩ recommended); tri-state capable with 8-mA drive."       },       {         "number": "81",         "name": "EMU1",         "type": "bidirectional",-        "description": "Emulator pin 1; when TRST is driven high, used as interrupt to/from emulator system and defined as input/output through JTAG scan; with EMU0 high and EMU1 low, rising edge on TRST latches device into boundary-scan mode; requires external pullup resistor (2.2 k\u03a9 to 4.7 k\u03a9 recommended); tri-state capable with 8-mA drive."+        "description": "Emulator pin 1; when TRST is driven high, used as interrupt to/from emulator system and defined as input/output through JTAG scan; with EMU0 high and EMU1 low, rising edge on TRST latches device into boundary-scan mode; requires external pullup resistor (2.2 kΩ to 4.7 kΩ recommended); tri-state capable with 8-mA drive."       },       {         "number": "82",@@ -551,7 +551,7 @@         "number": "84",         "name": "TRST",         "type": "input",-        "description": "JTAG test reset input with internal pulldown (active high); must be maintained low during normal device operation and requires external pulldown resistor (2.2 k\u03a9 recommended); drives TRST high gives scan system control of device operations."+        "description": "JTAG test reset input with internal pulldown (active high); must be maintained low during normal device operation and requires external pulldown resistor (2.2 kΩ recommended); drives TRST high gives scan system control of device operations."       },       {         "number": "85",@@ -684,6 +684,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "tms320f2808pza.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          16.0,+          16.0,+          1.5+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "51720097260ffba41c3062f85f67623721102fa535901c47cb555a1f444feeb3",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "tms320f2808pza-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          16.0,+          16.0,+          1.5+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "c8e5cb7c37ab629fd907b435c206f15955e93bf2d3b99f63b11452c372bff981",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -669,7 +669,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "tms320f2808pza.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          16.0,+          16.0,+          1.5+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "51720097260ffba41c3062f85f67623721102fa535901c47cb555a1f444feeb3",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "tms320f2808pza-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          16.0,+          16.0,+          1.5+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "c8e5cb7c37ab629fd907b435c206f15955e93bf2d3b99f63b11452c372bff981",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -716,4 +756,4 @@   "visibility": {     "public": true   }-}\ No newline at end of file+}