← Commit history
page.json+10−7@@ -248,19 +248,19 @@ "number": "36", "name": "ADCREFM", "type": "output",- "description": "Internal ADC reference medium output requiring 2.2 \u03bcF low-ESR ceramic bypass capacitor to analog ground."+ "description": "Internal ADC reference medium output requiring 2.2 μF low-ESR ceramic bypass capacitor to analog ground." }, { "number": "37", "name": "ADCREFP", "type": "output",- "description": "Internal ADC reference positive output requiring 2.2 \u03bcF low-ESR ceramic bypass capacitor to analog ground."+ "description": "Internal ADC reference positive output requiring 2.2 μF low-ESR ceramic bypass capacitor to analog ground." }, { "number": "38", "name": "ADCRESEXT", "type": "passive",- "description": "ADC external current bias resistor connection; connect 22-k\u03a9 resistor to analog ground."+ "description": "ADC external current bias resistor connection; connect 22-kΩ resistor to analog ground." }, { "number": "39",@@ -512,13 +512,13 @@ "number": "80", "name": "EMU0", "type": "bidirectional",- "description": "Emulator pin 0; when TRST is driven high, used as interrupt to/from emulator system and defined as input/output through JTAG scan; with EMU0 high and EMU1 low, rising edge on TRST latches device into boundary-scan mode; requires external pullup resistor (2.2 k\u03a9 to 4.7 k\u03a9 recommended); tri-state capable with 8-mA drive."+ "description": "Emulator pin 0; when TRST is driven high, used as interrupt to/from emulator system and defined as input/output through JTAG scan; with EMU0 high and EMU1 low, rising edge on TRST latches device into boundary-scan mode; requires external pullup resistor (2.2 kΩ to 4.7 kΩ recommended); tri-state capable with 8-mA drive." }, { "number": "81", "name": "EMU1", "type": "bidirectional",- "description": "Emulator pin 1; when TRST is driven high, used as interrupt to/from emulator system and defined as input/output through JTAG scan; with EMU0 high and EMU1 low, rising edge on TRST latches device into boundary-scan mode; requires external pullup resistor (2.2 k\u03a9 to 4.7 k\u03a9 recommended); tri-state capable with 8-mA drive."+ "description": "Emulator pin 1; when TRST is driven high, used as interrupt to/from emulator system and defined as input/output through JTAG scan; with EMU0 high and EMU1 low, rising edge on TRST latches device into boundary-scan mode; requires external pullup resistor (2.2 kΩ to 4.7 kΩ recommended); tri-state capable with 8-mA drive." }, { "number": "82",@@ -536,7 +536,7 @@ "number": "84", "name": "TRST", "type": "input",- "description": "JTAG test reset input with internal pulldown (active high); must be maintained low during normal device operation and requires external pulldown resistor (2.2 k\u03a9 recommended); drives TRST high gives scan system control of device operations."+ "description": "JTAG test reset input with internal pulldown (active high); must be maintained low during normal device operation and requires external pulldown resistor (2.2 kΩ recommended); drives TRST high gives scan system control of device operations." }, { "number": "85",@@ -712,5 +712,8 @@ "docs/tms320f2808pza-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }