main
Ray Publish 0.1.0 f85c4b6

TMS320F28052FPNT

Texas Instruments · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-80(12x12)

TMS320F28052FPNT from Texas Instruments, in a LQFP-80(12x12). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GPIO22 bidirectional General-purpose I/O 22, muxed with EQEP1S and SCITXDB.
2 GPIO32 bidirectional General-purpose I/O 32, muxed with SDAA (I2C data), EPWMSYNCI and EQEP1S.
3 GPIO33 bidirectional General-purpose I/O 33, muxed with SCLA (I2C clock), EPWMSYNCO and EQEP1I.
4 GPIO24 bidirectional General-purpose I/O 24 with internal pullup enabled by default, muxed with ECAP1 and EPWM7A.
5 GPIO42 bidirectional General-purpose I/O 42 with internal pullup enabled by default, muxed with EPWM7B, SCITXDC and CTRIPM1OUT.
6 VDD power_in CPU and logic digital power pin; with internal VREG place one 1.2-µF capacitor between each VDD pin and ground.
7 VSS power_in Digital ground pin.
8 XRS bidirectional Open-drain device reset input and watchdog reset output with internal pullup; place 2.2 kΩ to 10 kΩ between XRS and VDDIO and any filter capacitor 100 nF or smaller.
9 TRST input JTAG test reset with internal pulldown; active high, must be held low during normal operation with an external pulldown (2.2 kΩ generally adequate).
10 ADCINA5 input ADC Group A, channel 5 input.
11 ADCINA4 input ADC Group A, channel 4 input.
12 ADCINA3 input ADC Group A, channel 3 input (op-amp).
13 ADCINA2 input ADC Group A, channel 2 input.
14 ADCINA1 input ADC Group A, channel 1 input (op-amp).
15 M1GND power_in Ground pin for amplifier (channels A1, A3, B1).
16 ADCINB2 input ADC Group B, channel 2 input.
17 ADCINB1 input ADC Group B, channel 1 input (op-amp).
18 ADCINA0/VREFOUT input ADC Group A, channel 0 input, shared with the buffered DAC voltage reference output VREFOUT.
19 VREFHI input ADC external reference used in ADC external reference mode and as the VREFOUT reference.
20 VDDA power_in Analog power pin; tie with a 2.2-µF capacitor (typical) close to the pin.
21 VSSA power_in Analog ground pin.
22 VREFLO input ADC low reference, always tied to ground.
23 ADCINA6 input ADC Group A, channel 6 input (op-amp).
24 ADCINA7 input ADC Group A, channel 7 input.
25 ADCINB3 input ADC Group B, channel 3 input.
26 ADCINB4 input ADC Group B, channel 4 input (op-amp).
27 M2GND power_in Ground pin for amplifier (channels A6, B4, B6).
28 ADCINB5 input ADC Group B, channel 5 input.
29 ADCINB6 input ADC Group B, channel 6 input (op-amp).
30 ADCINB0 input ADC Group B, channel 0 input.
31 ADCINB7 input ADC Group B, channel 7 input (op-amp).
32 PFCGND power_in Ground pin for amplifier (channel B7).
33 GPIO27 bidirectional General-purpose I/O 27, muxed with SCITXDC.
34 GPIO31 bidirectional General-purpose I/O 31 with internal pullup enabled by default, muxed with CANTXA, SCITXDB and EPWM7B.
35 GPIO30 bidirectional General-purpose I/O 30 with internal pullup enabled by default, muxed with CANRXA, SCIRXDB and EPWM7A.
36 GPIO9 bidirectional General-purpose I/O 9, muxed with EPWM5B and SCITXDB.
37 VSS power_in Digital ground pin.
38 VDDIO power_in Digital I/O buffer and flash power pin; single supply source when VREG is enabled, with a decoupling capacitor on each pin.
39 TEST2 unconnected Test pin reserved for TI; must be left unconnected.
40 GPIO26 bidirectional General-purpose I/O 26, muxed with SCIRXDC.
41 GPIO29 bidirectional General-purpose I/O 29, muxed with SCITXDA, SCLA (I2C clock), TZ3 and CTRIPPFCOUT.
42 GPIO28 bidirectional General-purpose I/O 28, muxed with SCIRXDA, SDAA (I2C data) and TZ2.
43 GPIO18 bidirectional General-purpose I/O 18, muxed with SPICLKA, SCITXDB and XCLKOUT.
44 GPIO17 bidirectional General-purpose I/O 17, muxed with SPISOMIA, EQEP1I, TZ3 and CTRIPPFCOUT.
45 GPIO8 bidirectional General-purpose I/O 8, muxed with EPWM5A and ADCSOCAO.
46 GPIO25 bidirectional General-purpose I/O 25 (other mux options reserved).
47 GPIO16 bidirectional General-purpose I/O 16, muxed with SPISIMOA, EQEP1S and TZ2.
48 GPIO12 bidirectional General-purpose I/O 12, muxed with TZ1, CTRIPM1OUT and SCITXDA.
49 GPIO7 bidirectional General-purpose I/O 7, muxed with EPWM4B and SCIRXDA.
50 GPIO6 bidirectional General-purpose I/O 6, muxed with EPWM4A, EPWMSYNCI and EPWMSYNCO.
51 X2 output On-chip crystal oscillator output; connect crystal or resonator across X1 and X2, leave unconnected if unused.
52 X1 input On-chip 1.8-V crystal oscillator input; connect crystal or resonator across X1 and X2, tie to GND if unused.
53 VSS power_in Digital ground pin.
54 VDD power_in CPU and logic digital power pin; with internal VREG place one 1.2-µF capacitor between each VDD pin and ground.
55 GPIO19 bidirectional General-purpose I/O 19, muxed with XCLKIN, SPISTEA, SCIRXDB and ECAP1.
56 GPIO39 bidirectional General-purpose I/O 39, muxed with SCIRXDC and CTRIPPFCOUT.
57 GPIO38/TCK/XCLKIN bidirectional General-purpose I/O 38 shared with JTAG test clock TCK (internal pullup) and external oscillator input XCLKIN.
58 GPIO37/TDO bidirectional General-purpose I/O 37 shared with JTAG test data output TDO (8 mA drive).
59 GPIO35/TDI bidirectional General-purpose I/O 35 shared with JTAG test data input TDI (internal pullup).
60 GPIO36/TMS bidirectional General-purpose I/O 36 shared with JTAG test-mode select TMS (internal pullup).
61 GPIO11 bidirectional General-purpose I/O 11, muxed with EPWM6B and SCIRXDB.
62 GPIO5 bidirectional General-purpose I/O 5, muxed with EPWM3B, SPISIMOA and ECAP1.
63 GPIO4 bidirectional General-purpose I/O 4, muxed with EPWM3A.
64 GPIO40 bidirectional General-purpose I/O 40 with internal pullup enabled by default, muxed with EPWM7A.
65 GPIO10 bidirectional General-purpose I/O 10, muxed with EPWM6A and ADCSOCBO.
66 GPIO3 bidirectional General-purpose I/O 3, muxed with EPWM2B and SPISOMIA.
67 GPIO2 bidirectional General-purpose I/O 2, muxed with EPWM2A.
68 GPIO1 bidirectional General-purpose I/O 1, muxed with EPWM1B and CTRIPM1OUT.
69 GPIO0 bidirectional General-purpose I/O 0, muxed with EPWM1A.
70 VDDIO power_in Digital I/O buffer and flash power pin; single supply source when VREG is enabled, with a decoupling capacitor on each pin.
71 VREGENZ input Internal voltage regulator enable with internal pulldown; tie to VSS to enable the internal 1.8-V VREG or to VDDIO to use an external 1.8-V supply.
72 VSS power_in Digital ground pin.
73 VDD power_in CPU and logic digital power pin; with internal VREG place one 1.2-µF capacitor between each VDD pin and ground.
74 GPIO34 bidirectional General-purpose I/O 34, muxed with CTRIPPFCOUT.
75 GPIO15 bidirectional General-purpose I/O 15, muxed with TZ1, CTRIPM1OUT and SCIRXDB.
76 GPIO13 bidirectional General-purpose I/O 13, muxed with TZ2.
77 GPIO14 bidirectional General-purpose I/O 14, muxed with TZ3, CTRIPPFCOUT and SCITXDB.
78 GPIO20 bidirectional General-purpose I/O 20 with internal pullup enabled by default, muxed with EQEP1A, EPWM7A and CTRIPM1OUT.
79 GPIO21 bidirectional General-purpose I/O 21 with internal pullup enabled by default, muxed with EQEP1B and EPWM7B.
80 GPIO23 bidirectional General-purpose I/O 23, muxed with EQEP1I and SCIRXDB.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package LQFP-80(12x12)
Category Embedded Processors & Controllers
Pins 80

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VDDIO supply voltage (I/O and flash) wrt VSS VDDIO -0.3 4.6 V 16
VDD supply voltage wrt VSS VDD -0.3 2.5 V 16
Analog voltage VDDA wrt VSSA VDDA -0.3 4.6 V 16
Input voltage (3.3 V) VIN -0.3 4.6 V VIN (3.3 V) 16
Input voltage (X1) VIN -0.3 2.5 V VIN (X1) 16
Output voltage VO -0.3 4.6 V 16
Digital input clamp current IIK -20 20 mA VIN < VSS or VIN > VDDIO 16
Output clamp current IOK -20 20 mA VO < 0 or VO > VDDIO 16
Junction temperature (abs max) TJ -40 150 °C 16
Storage temperature Tstg -65 150 °C 16
Device supply voltage, I/O VDDIO 2.97 3.3 3.63 V 17
Device supply voltage CPU VDD 1.71 1.8 1.995 V When internal VREG is disabled and 1.8 V is supplied externally 17
Analog supply voltage VDDA 2.97 3.3 3.63 V 17
Device clock frequency (system clock) 2 60 MHz 17
High-level input voltage VIH 2 V 3.3 V; max VDDIO + 0.3 17
Low-level input voltage VIL 0.8 V 3.3 V; min VSS, 0.3 17
High-level output source current, all GPIO IOH -4 mA VOH = VOH(MIN), All GPIO pins 17
High-level output source current, Group 2 IOH -8 mA VOH = VOH(MIN), Group 2 17
Low-level output sink current, all GPIO IOL 4 mA VOL = VOL(MAX), All GPIO pins 17
Low-level output sink current, Group 2 IOL 8 mA VOL = VOL(MAX), Group 2 17
Junction temperature, T version TJ -40 105 °C T version 17
High-level output voltage VOH 2.4 V IOH = IOH MAX 21
Low-level output voltage VOL 0.4 V IOL = IOL MAX 21
Input current low level, GPIO pullup enabled IIL -205 -140 -80 μA Pin with pullup enabled, VDDIO = 3.3 V, VIN = 0 V, All GPIO pins 21
Input current low level, XRS pin IIL -375 -300 -230 μA Pin with pullup enabled, VDDIO = 3.3 V, VIN = 0 V, XRS pin 21
Input current low level, pullup disabled IIL -2 2 μA Pin with pullup disabled, VDDIO = 3.3 V, VIN = 0 V 21
Input current high level, pulldown disabled IIH -2 2 μA Pin with pulldown disabled, VDDIO = 3.3 V, VIN = VDDIO 21
Input current high level, pulldown enabled IIH 28 50 80 μA Pin with pulldown enabled, VDDIO = 3.3 V, VIN = VDDIO 21
Output current, pullup or pulldown disabled IOZ -2 2 μA VO = VDDIO or 0 V 21
Supervisor reset release delay time 400 800 μs Time after BOR/POR/OVR event is removed to XRS release 21
Input capacitance CI 2 pF 21
VDDIO BOR trip point 2.78 V Falling VDDIO 21
VDDIO BOR hysteresis 35 mV 21
VREG VDD output 1.9 V Internal VREG on 21
Junction-to-case thermal resistance RΘJC 14.2 °C/W Air flow 0 lfm 22
Junction-to-board thermal resistance RΘJB 21.9 °C/W Air flow 0 lfm 22
Junction-to-free air thermal resistance RΘJA 49.9 °C/W High k PCB, air flow 0 lfm 22

CAD (KiCad official)

  • Symbol: TMS320F28052FPNT
  • Footprint: Package_QFP:LQFP-80_12x12mm_P0.5mm
  • 3D model: LQFP-80(12x12) (KiCad packages3D, STEP)
  • 3D model files: tms320f28052fpnt-etched.step / tms320f28052fpnt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tms320f28052fpnt.step / tms320f28052fpnt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (157 pp, sha256 3c41721233f1415c, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF