TMS320F28035PNTR

{
 "schema": "adom.pads/1",
 "slug": "tms320f28035pntr",
 "footprint": "LQFP-80_12x12mm_P0.5mm",
 "generated_from": {
  "footprint": "LQFP-80_12x12mm_P0.5mm@sha256:528e4841fa5e3d77",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -6.6875,
   -4.75
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "LQFP-80_12x12mm_P0.5mm@sha256:528e4841fa5e3d77"
 },
 "pad_count": 80,
 "symbol_pins": [
  "1",
  "10",
  "11",
  "12",
  "13",
  "14",
  "15",
  "16",
  "17",
  "18",
  "19",
  "2",
  "20",
  "21",
  "22",
  "23",
  "24",
  "25",
  "26",
  "27",
  "28",
  "29",
  "3",
  "30",
  "31",
  "32",
  "33",
  "34",
  "35",
  "36",
  "37",
  "38",
  "39",
  "4",
  "40",
  "41",
  "42",
  "43",
  "44",
  "45",
  "46",
  "47",
  "48",
  "49",
  "5",
  "50",
  "51",
  "52",
  "53",
  "54",
  "55",
  "56",
  "57",
  "58",
  "59",
  "6",
  "60",
  "61",
  "62",
  "63",
  "64",
  "65",
  "66",
  "67",
  "68",
  "69",
  "7",
  "70",
  "71",
  "72",
  "73",
  "74",
  "75",
  "76",
  "77",
  "78",
  "79",
  "8",
  "80",
  "9"
 ],
 "paste_apertures": 0,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -6.6875,
    -4.75
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.25
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "GPIO22/EQEP1S/LINTXA",
   "type": "bidirectional",
   "description": "GPIO22. Alt: enhanced QEP1 strobe (EQEP1S, I/O), LIN transmit A (LINTXA, O). Internal pull-up enabled after reset.",
   "is_pin1": true,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -6.6875,
    -4.25
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.25
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "GPIO32/SDAA/EPWMSYNCI/ADCSOCAO",
   "type": "bidirectional",
   "description": "GPIO32. Alt: I2C-A data open-drain (SDAA, I/OD), ePWM external sync input (EPWMSYNCI, I), ADC start-of-conversion A (ADCSOCAO, O).",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -6.6875,
    -3.75
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.25
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "GPIO33/SCLA/EPWMSYNCO/ADCSOCBO",
   "type": "bidirectional",
   "description": "GPIO33. Alt: I2C-A clock open-drain (SCLA, I/OD), ePWM external sync output (EPWMSYNCO, O), ADC start-of-conversion B (ADCSOCBO, O).",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "4",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -6.6875,
    -3.25
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.25
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "4",
   "name": "GPIO23/EQEP1I/LINRXA",
   "type": "bidirectional",
   "description": "GPIO23. Alt: enhanced QEP1 index (EQEP1I, I/O), LIN receive A (LINRXA, I).",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "5",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -6.6875,
    -2.75
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.25
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "5",
   "name": "GPIO42/COMP1OUT",
   "type": "bidirectional",
   "description": "GPIO42. Alt: comparator 1 direct output (COMP1OUT, O).",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "6",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -6.6875,
    -2.25
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.25
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "6",
   "name": "GPIO43/COMP2OUT",
   "type": "bidirectional",
   "description": "GPIO43. Alt: comparator 2 direct output (COMP2OUT, O).",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "7",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -6.6875,
    -1.75
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.25
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "7",
   "name": "VDD",
   "type": "power_in",
   "description": "CPU and logic digital 1.8 V supply. Place a 1.2 µF (or larger) decoupling capacitor between each VDD pin and ground when using the internal VREG.",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "8",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -6.6875,
    -1.25
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.25
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "8",
   "name": "VSS",
   "type": "power_in",
   "description": "Digital ground.",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "9",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -6.6875,
    -0.75
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.25
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "9",
   "name": "XRS",
   "type": "bidirectional",
   "description": "Device reset input and watchdog reset output. Open-drain with internal pull-up; connect a 2.2 kΩ-10 kΩ pull-up to VDDIO. Optional 100 nF or smaller noise-filter cap to VSS.",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "10",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -6.6875,
    -0.25
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.25
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "10",
   "name": "TRST",
   "type": "input",
   "description": "JTAG test reset with internal pull-down. Must be held low during normal device operation; requires external pull-up (typically 2.2 kΩ) to activate JTAG. Active-high test pin.",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "11",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -6.6875,
    0.25
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.25
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "11",
   "name": "ADCINA7/ADCINA6",
   "type": "input",
   "description": "ADC group A, channel 7 input (also channel 6 input on this pin per the datasheet listing). Analog input; not 5 V tolerant.",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "12",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -6.6875,
    0.75
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.25
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "12",
   "name": "COMP3A/AIO6",
   "type": "bidirectional",
   "description": "Comparator input 3A (analog, I) / digital AIO6 (I/O). AIO pins have no internal pull-up.",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "13",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -6.6875,
    1.25
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.25
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "13",
   "name": "ADCINA5/ADCINA4",
   "type": "input",
   "description": "ADC group A, channel 5 input (also channel 4 input). Analog input; not 5 V tolerant.",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "14",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -6.6875,
    1.75
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.25
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "14",
   "name": "COMP2A/AIO4",
   "type": "bidirectional",
   "description": "Comparator input 2A (I) / digital AIO4 (I/O). AIO pins have no internal pull-up.",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "15",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -6.6875,
    2.25
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.25
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "15",
   "name": "ADCINA3/ADCINA2",
   "type": "input",
   "description": "ADC group A, channel 3 input (also channel 2 input). Analog input; not 5 V tolerant.",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "16",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -6.6875,
    2.75
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.25
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "16",
   "name": "COMP1A/AIO2",
   "type": "bidirectional",
   "description": "Comparator input 1A (I) / digital AIO2 (I/O). AIO pins have no internal pull-up.",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "17",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -6.6875,
    3.25
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.25
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "17",
   "name": "ADCINA1",
   "type": "input",
   "description": "ADC group A, channel 1 input. Analog input; not 5 V tolerant.",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "18",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -6.6875,
    3.75
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.25
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "18",
   "name": "ADCINA0",
   "type": "input",
   "description": "ADC group A, channel 0 input. On 80-pin PN, ADCINA0 has a dedicated pin (VREFHI is separate).",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "19",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -6.6875,
    4.25
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.25
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "19",
   "name": "VREFHI",
   "type": "input",
   "description": "ADC external reference high - used only in ADC external reference mode. Dedicated pin on the 80-pin PN package.",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "20",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -6.6875,
    4.75
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.25
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "20",
   "name": "VDDA",
   "type": "power_in",
   "description": "Analog 3.3 V supply. Place a ~2.2 µF decoupling capacitor near this pin.",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "21",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -4.75,
    6.6875
   ],
   "rot": 0.0,
   "size": [
    0.25,
    1.475
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "21",
   "name": "VSSA",
   "type": "power_in",
   "description": "Analog ground.",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "22",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -4.25,
    6.6875
   ],
   "rot": 0.0,
   "size": [
    0.25,
    1.475
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "22",
   "name": "VREFLO",
   "type": "input",
   "description": "ADC external reference low. Typically tied to VSSA.",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "23",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -3.75,
    6.6875
   ],
   "rot": 0.0,
   "size": [
    0.25,
    1.475
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "23",
   "name": "ADCINB0",
   "type": "input",
   "description": "ADC group B, channel 0 input.",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "24",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -3.25,
    6.6875
   ],
   "rot": 0.0,
   "size": [
    0.25,
    1.475
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "24",
   "name": "ADCINB1",
   "type": "input",
   "description": "ADC group B, channel 1 input.",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "25",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.75,
    6.6875
   ],
   "rot": 0.0,
   "size": [
    0.25,
    1.475
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "25",
   "name": "COMP1B/AIO10",
   "type": "bidirectional",
   "description": "Comparator input 1B (I) / digital AIO10 (I/O).",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "26",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.25,
    6.6875
   ],
   "rot": 0.0,
   "size": [
    0.25,
    1.475
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "26",
   "name": "ADCINB3/ADCINB2",
   "type": "input",
   "description": "ADC group B, channel 3 input (also channel 2 input).",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "27",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -1.75,
    6.6875
   ],
   "rot": 0.0,
   "size": [
    0.25,
    1.475
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "27",
   "name": "COMP2B/AIO12",
   "type": "bidirectional",
   "description": "Comparator input 2B (I) / digital AIO12 (I/O).",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "28",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -1.25,
    6.6875
   ],
   "rot": 0.0,
   "size": [
    0.25,
    1.475
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "28",
   "name": "ADCINB5/ADCINB4",
   "type": "input",
   "description": "ADC group B, channel 5 input (also channel 4 input).",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "29",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -0.75,
    6.6875
   ],
   "rot": 0.0,
   "size": [
    0.25,
    1.475
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "29",
   "name": "COMP3B/AIO14",
   "type": "bidirectional",
   "description": "Comparator input 3B (I) / digital AIO14 (I/O).",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "30",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -0.25,
    6.6875
   ],
   "rot": 0.0,
   "size": [
    0.25,
    1.475
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "30",
   "name": "ADCINB7/ADCINB6",
   "type": "input",
   "description": "ADC group B, channel 7 input (also channel 6 input).",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "31",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    0.25,
    6.6875
   ],
   "rot": 0.0,
   "size": [
    0.25,
    1.475
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "31",
   "name": "GPIO27/HRCAP2/SPISTEB",
   "type": "bidirectional",
   "description": "GPIO27. Alt: high-resolution input capture 2 (HRCAP2, I), SPI-B slave transmit enable (SPISTEB, I/O).",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "32",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    0.75,
    6.6875
   ],
   "rot": 0.0,
   "size": [
    0.25,
    1.475
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "32",
   "name": "GPIO31/CANTXA",
   "type": "bidirectional",
   "description": "GPIO31. Alt: CAN transmit A (CANTXA, O).",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "33",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    1.25,
    6.6875
   ],
   "rot": 0.0,
   "size": [
    0.25,
    1.475
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "33",
   "name": "GPIO30/CANRXA",
   "type": "bidirectional",
   "description": "GPIO30. Alt: CAN receive A (CANRXA, I).",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "34",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    1.75,
    6.6875
   ],
   "rot": 0.0,
   "size": [
    0.25,
    1.475
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "34",
   "name": "GPIO29/SCITXDA/SCLA/TZ3",
   "type": "bidirectional",
   "description": "GPIO29. Alt: SCI-A transmit data (SCITXDA, O), I2C-A clock open-drain (SCLA, I/OD), trip-zone input 3 (TZ3, I).",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "35",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.25,
    6.6875
   ],
   "rot": 0.0,
   "size": [
    0.25,
    1.475
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "35",
   "name": "VSS",
   "type": "power_in",
   "description": "Digital ground.",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "36",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.75,
    6.6875
   ],
   "rot": 0.0,
   "size": [
    0.25,
    1.475
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "36",
   "name": "VDDIO",
   "type": "power_in",
   "description": "Digital I/O buffer and flash 3.3 V supply. Place a decoupling capacitor at each VDDIO pin.",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "37",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    3.25,
    6.6875
   ],
   "rot": 0.0,
   "size": [
    0.25,
    1.475
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "37",
   "name": "GPIO26/HRCAP1/SPICLKB",
   "type": "bidirectional",
   "description": "GPIO26. Alt: high-resolution input capture 1 (HRCAP1, I), SPI-B clock (SPICLKB, I/O).",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "38",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    3.75,
    6.6875
   ],
   "rot": 0.0,
   "size": [
    0.25,
    1.475
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "38",
   "name": "TEST2",
   "type": "bidirectional",
   "description": "Test pin reserved by TI. Must be left unconnected.",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "39",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    4.25,
    6.6875
   ],
   "rot": 0.0,
   "size": [
    0.25,
    1.475
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "39",
   "name": "GPIO9/EPWM5B/LINTXA/HRCAP1",
   "type": "bidirectional",
   "description": "GPIO9. Alt: enhanced PWM5 output B (EPWM5B, O), LIN transmit A (LINTXA, O), high-resolution input capture 1 (HRCAP1, I).",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "40",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    4.75,
    6.6875
   ],
   "rot": 0.0,
   "size": [
    0.25,
    1.475
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "40",
   "name": "GPIO28/SCIRXDA/SDAA/TZ2",
   "type": "bidirectional",
   "description": "GPIO28. Alt: SCI-A receive data (SCIRXDA, I), I2C-A data open-drain (SDAA, I/OD), trip-zone input 2 (TZ2, I).",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "41",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    6.6875,
    4.75
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.25
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "41",
   "name": "GPIO18/SPICLKA/LINTXA/XCLKOUT",
   "type": "bidirectional",
   "description": "GPIO18. Alt: SPI-A clock (SPICLKA, I/O), LIN transmit A (LINTXA, O), external clock output (XCLKOUT, O/Z) sourced from SYSCLKOUT with 1x/½/¼ divider.",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "42",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    6.6875,
    4.25
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.25
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "42",
   "name": "GPIO17/SPISOMIA/TZ3",
   "type": "bidirectional",
   "description": "GPIO17. Alt: SPI-A slave-out master-in (SPISOMIA, I/O), trip-zone input 3 (TZ3, I).",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "43",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    6.6875,
    3.75
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.25
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "43",
   "name": "GPIO8/EPWM5A/ADCSOCAO",
   "type": "bidirectional",
   "description": "GPIO8. Alt: enhanced PWM5 output A and HRPWM channel (EPWM5A, O), ADC start-of-conversion A (ADCSOCAO, O).",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "44",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    6.6875,
    3.25
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.25
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "44",
   "name": "GPIO25/SPISOMIB",
   "type": "bidirectional",
   "description": "GPIO25. Alt: SPI-B slave-out master-in (SPISOMIB, I/O). SPI-B is available on PN and RSH packages only.",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "45",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    6.6875,
    2.75
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.25
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "45",
   "name": "GPIO44",
   "type": "bidirectional",
   "description": "GPIO44 (no additional peripheral aliases on this pin).",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "46",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    6.6875,
    2.25
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.25
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "46",
   "name": "GPIO16/SPISIMOA/TZ2",
   "type": "bidirectional",
   "description": "GPIO16. Alt: SPI-A slave-in master-out (SPISIMOA, I/O), trip-zone input 2 (TZ2, I).",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "47",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    6.6875,
    1.75
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.25
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "47",
   "name": "GPIO12/TZ1/SCITXDA/SPISIMOB",
   "type": "bidirectional",
   "description": "GPIO12. Alt: trip-zone input 1 (TZ1, I), SCI-A transmit data (SCITXDA, O), SPI-B slave-in master-out (SPISIMOB, I/O; PN package only).",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "48",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    6.6875,
    1.25
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.25
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "48",
   "name": "GPIO41/EPWM7B",
   "type": "bidirectional",
   "description": "GPIO41. Alt: enhanced PWM7 output B (EPWM7B, O).",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "49",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    6.6875,
    0.75
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.25
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "49",
   "name": "GPIO7/EPWM4B/SCIRXDA",
   "type": "bidirectional",
   "description": "GPIO7. Alt: enhanced PWM4 output B (EPWM4B, O), SCI-A receive data (SCIRXDA, I).",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "50",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    6.6875,
    0.25
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.25
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "50",
   "name": "GPIO6/EPWM4A/EPWMSYNCI/EPWMSYNCO",
   "type": "bidirectional",
   "description": "GPIO6. Alt: enhanced PWM4 output A and HRPWM channel (EPWM4A, O), external ePWM sync input (EPWMSYNCI, I), external ePWM sync output (EPWMSYNCO, O).",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "51",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    6.6875,
    -0.25
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.25
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "51",
   "name": "X2",
   "type": "output",
   "description": "On-chip crystal oscillator output. Connect a quartz crystal or ceramic resonator between X1 and X2, or leave unconnected if not used.",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "52",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    6.6875,
    -0.75
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.25
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "52",
   "name": "X1",
   "type": "input",
   "description": "1.8 V on-chip crystal oscillator input. Connect a quartz crystal or ceramic resonator between X1 and X2. Tie to GND if unused. Disable XCLKIN path via CLKCTL bit 13 when using the crystal.",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "53",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    6.6875,
    -1.25
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.25
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "53",
   "name": "VSS",
   "type": "power_in",
   "description": "Digital ground.",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "54",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    6.6875,
    -1.75
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.25
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "54",
   "name": "VDD",
   "type": "power_in",
   "description": "CPU and logic digital 1.8 V supply. 1.2 µF (or larger) decoupling per pin when using internal VREG.",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "55",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    6.6875,
    -2.25
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.25
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "55",
   "name": "GPIO19/XCLKIN/SPISTEA/LINRXA/ECAP1",
   "type": "bidirectional",
   "description": "GPIO19. Alt: external oscillator input (XCLKIN, I; path not gated by pin mux), SPI-A slave transmit enable (SPISTEA, I/O), LIN receive A (LINRXA, I), enhanced capture 1 (ECAP1, I/O).",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "56",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    6.6875,
    -2.75
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.25
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "56",
   "name": "GPIO39",
   "type": "bidirectional",
   "description": "GPIO39 (no additional peripheral aliases on this pin).",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "57",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    6.6875,
    -3.25
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.25
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "57",
   "name": "GPIO38/TCK/XCLKIN",
   "type": "bidirectional",
   "description": "GPIO38 default at reset is JTAG TCK (test clock, with internal pull-up). Also can serve as external clock input (XCLKIN). Selected via TRST behavior and CLKCTL/XCLK registers.",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "58",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    6.6875,
    -3.75
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.25
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "58",
   "name": "GPIO37/TDO",
   "type": "bidirectional",
   "description": "GPIO37 default is JTAG TDO (test data output, O/Z, 8 mA drive). Contents of selected register shifted out on falling edge of TCK.",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "59",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    6.6875,
    -4.25
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.25
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "59",
   "name": "GPIO35/TDI",
   "type": "bidirectional",
   "description": "GPIO35 default is JTAG TDI (test data input, with internal pull-up). Clocked into selected register on rising edge of TCK.",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "60",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    6.6875,
    -4.75
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.25
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "60",
   "name": "GPIO36/TMS",
   "type": "bidirectional",
   "description": "GPIO36 default is JTAG TMS (test mode select, with internal pull-up). Clocked into TAP controller on rising edge of TCK.",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "61",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    4.75,
    -6.6875
   ],
   "rot": 0.0,
   "size": [
    0.25,
    1.475
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "61",
   "name": "GPIO11/EPWM6B/LINRXA/HRCAP2",
   "type": "bidirectional",
   "description": "GPIO11. Alt: enhanced PWM6 output B (EPWM6B, O), LIN receive A (LINRXA, I), high-resolution input capture 2 (HRCAP2, I).",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "62",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    4.25,
    -6.6875
   ],
   "rot": 0.0,
   "size": [
    0.25,
    1.475
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "62",
   "name": "GPIO5/EPWM3B/SPISIMOA/ECAP1",
   "type": "bidirectional",
   "description": "GPIO5. Alt: enhanced PWM3 output B (EPWM3B, O), SPI-A slave-in master-out (SPISIMOA, I/O), enhanced capture 1 (ECAP1, I/O).",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "63",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    3.75,
    -6.6875
   ],
   "rot": 0.0,
   "size": [
    0.25,
    1.475
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "63",
   "name": "GPIO4/EPWM3A",
   "type": "bidirectional",
   "description": "GPIO4. Alt: enhanced PWM3 output A and HRPWM channel (EPWM3A, O).",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "64",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    3.25,
    -6.6875
   ],
   "rot": 0.0,
   "size": [
    0.25,
    1.475
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "64",
   "name": "GPIO40/EPWM7A",
   "type": "bidirectional",
   "description": "GPIO40. Alt: enhanced PWM7 output A (EPWM7A, O).",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "65",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.75,
    -6.6875
   ],
   "rot": 0.0,
   "size": [
    0.25,
    1.475
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "65",
   "name": "GPIO10/EPWM6A/ADCSOCBO",
   "type": "bidirectional",
   "description": "GPIO10. Alt: enhanced PWM6 output A and HRPWM channel (EPWM6A, O), ADC start-of-conversion B (ADCSOCBO, O).",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "66",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.25,
    -6.6875
   ],
   "rot": 0.0,
   "size": [
    0.25,
    1.475
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "66",
   "name": "GPIO3/EPWM2B/SPISOMIA/COMP2OUT",
   "type": "bidirectional",
   "description": "GPIO3. Alt: enhanced PWM2 output B (EPWM2B, O), SPI-A slave-out master-in (SPISOMIA, I/O), comparator 2 direct output (COMP2OUT, O).",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "67",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    1.75,
    -6.6875
   ],
   "rot": 0.0,
   "size": [
    0.25,
    1.475
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "67",
   "name": "GPIO2/EPWM2A",
   "type": "bidirectional",
   "description": "GPIO2. Alt: enhanced PWM2 output A and HRPWM channel (EPWM2A, O).",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "68",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    1.25,
    -6.6875
   ],
   "rot": 0.0,
   "size": [
    0.25,
    1.475
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "68",
   "name": "GPIO1/EPWM1B/COMP1OUT",
   "type": "bidirectional",
   "description": "GPIO1. Alt: enhanced PWM1 output B (EPWM1B, O), comparator 1 direct output (COMP1OUT, O).",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "69",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    0.75,
    -6.6875
   ],
   "rot": 0.0,
   "size": [
    0.25,
    1.475
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "69",
   "name": "GPIO0/EPWM1A",
   "type": "bidirectional",
   "description": "GPIO0. Alt: enhanced PWM1 output A and HRPWM channel (EPWM1A, O).",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "70",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    0.25,
    -6.6875
   ],
   "rot": 0.0,
   "size": [
    0.25,
    1.475
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "70",
   "name": "VDDIO",
   "type": "power_in",
   "description": "Digital I/O buffer and flash 3.3 V supply. Place a decoupling capacitor at each VDDIO pin.",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "71",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -0.25,
    -6.6875
   ],
   "rot": 0.0,
   "size": [
    0.25,
    1.475
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "71",
   "name": "VSS",
   "type": "power_in",
   "description": "Digital ground.",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "72",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -0.75,
    -6.6875
   ],
   "rot": 0.0,
   "size": [
    0.25,
    1.475
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "72",
   "name": "VDD",
   "type": "power_in",
   "description": "CPU and logic digital 1.8 V supply. 1.2 µF (or larger) decoupling per pin when using internal VREG.",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "73",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -1.25,
    -6.6875
   ],
   "rot": 0.0,
   "size": [
    0.25,
    1.475
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "73",
   "name": "VREGENZ",
   "type": "input",
   "description": "Internal 1.8 V VREG enable (with internal pull-down). Tie to VSS to enable the internal VREG; tie to VDDIO to disable it and supply external 1.8 V.",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "74",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -1.75,
    -6.6875
   ],
   "rot": 0.0,
   "size": [
    0.25,
    1.475
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "74",
   "name": "GPIO34/COMP2OUT/COMP3OUT",
   "type": "bidirectional",
   "description": "GPIO34. Alt: comparator 2 direct output (COMP2OUT, O), comparator 3 direct output (COMP3OUT, O).",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "75",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.25,
    -6.6875
   ],
   "rot": 0.0,
   "size": [
    0.25,
    1.475
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "75",
   "name": "GPIO15/TZ1/LINRXA/SPISTEB",
   "type": "bidirectional",
   "description": "GPIO15. Alt: trip-zone input 1 (TZ1, I), LIN receive A (LINRXA, I), SPI-B slave transmit enable (SPISTEB, I/O).",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "76",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.75,
    -6.6875
   ],
   "rot": 0.0,
   "size": [
    0.25,
    1.475
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "76",
   "name": "GPIO13/TZ2/SPISOMIB",
   "type": "bidirectional",
   "description": "GPIO13. Alt: trip-zone input 2 (TZ2, I), SPI-B slave-out master-in (SPISOMIB, I/O).",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "77",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -3.25,
    -6.6875
   ],
   "rot": 0.0,
   "size": [
    0.25,
    1.475
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "77",
   "name": "GPIO14/TZ3/LINTXA/SPICLKB",
   "type": "bidirectional",
   "description": "GPIO14. Alt: trip-zone input 3 (TZ3, I), LIN transmit A (LINTXA, O), SPI-B clock (SPICLKB, I/O).",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "78",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -3.75,
    -6.6875
   ],
   "rot": 0.0,
   "size": [
    0.25,
    1.475
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "78",
   "name": "GPIO20/EQEP1A/COMP1OUT",
   "type": "bidirectional",
   "description": "GPIO20. Alt: enhanced QEP1 input A (EQEP1A, I), comparator 1 direct output (COMP1OUT, O).",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "79",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -4.25,
    -6.6875
   ],
   "rot": 0.0,
   "size": [
    0.25,
    1.475
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "79",
   "name": "GPIO21/EQEP1B/COMP2OUT",
   "type": "bidirectional",
   "description": "GPIO21. Alt: enhanced QEP1 input B (EQEP1B, I), comparator 2 direct output (COMP2OUT, O).",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "80",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -4.75,
    -6.6875
   ],
   "rot": 0.0,
   "size": [
    0.25,
    1.475
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "80",
   "name": "GPIO24/ECAP1/SPISIMOB",
   "type": "bidirectional",
   "description": "GPIO24. Alt: enhanced capture 1 (ECAP1, I/O), SPI-B slave-in master-out (SPISIMOB, I/O; PN and RSH packages only).",
   "is_pin1": false,
   "source": {
    "geometry": "LQFP-80_12x12mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}