main
Ray Publish 0.1.0 19800da
{
  "slug": "tms320f28027fpttr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Microcontroller Units (MCUs/MPUs/SOCs), LQFP-48(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "single chip microcomputer-microcontroller",
    "tms320f28027fpttr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tms320f28027fpttr.kicad_sym",
    "tms320f28027fpttr.kicad_mod",
    "tms320f28027fpttr.glb",
    "tms320f28027fpttr.step",
    "tms320f28027fpttr.lbr",
    "docs/hero.png",
    "docs/tms320f28027fpttr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tms320f28027fpttr-hero.glb",
    "tms320f28027fpttr-hero.overlay.json"
  ],
  "component": {
    "mpn": "TMS320F28027FPTTR",
    "manufacturer": "Texas Instruments",
    "package": "LQFP-48(7x7)",
    "pin_count": 48,
    "category": "Single Chip Microcomputer/Microcontroller",
    "subcategory": "Microcontroller Units (MCUs/MPUs/SOCs)",
    "datasheet": "https://www.ti.com/lit/ds/symlink/tms320f28027f.pdf",
    "parts": {
      "symbol": "tms320f28027fpttr.kicad_sym",
      "footprint": "tms320f28027fpttr.kicad_mod",
      "model_3d": "tms320f28027fpttr-hero.glb",
      "model_3d_plain": "tms320f28027fpttr.glb",
      "model_3d_step": "tms320f28027fpttr-etched.step",
      "model_3d_step_plain": "tms320f28027fpttr.step",
      "lbr": "tms320f28027fpttr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2879262",
      "digikey": "296-TMS320F28027FPTTR-ND",
      "mouser": "595-MS320F28027FPTTR"
    },
    "distributor_check": {
      "checked_at": "2026-11-13T19:44:03Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-TMS320F28027FPTTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-MS320F28027FPTTR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GPIO29/SCITXDA/SCLA/TZ3",
        "type": "bidirectional",
        "description": "General-purpose I/O 29 shared with SCI-A transmit, I2C-A clock (open-drain bidirectional) and trip zone 3 input; inputs are not 5-V tolerant."
      },
      {
        "number": "2",
        "name": "TRST",
        "type": "input",
        "description": "JTAG test reset with internal pulldown; must be maintained low during normal operation and requires an external pulldown (2.2 kΩ generally adequate)."
      },
      {
        "number": "3",
        "name": "XRS",
        "type": "bidirectional",
        "description": "Device reset input and watchdog reset output (open-drain with internal pullup); driven low during power-on/brown-out and for 512 OSCCLK cycles on watchdog reset, with a 2.2 kΩ to 10 kΩ pullup to VDDIO and a capacitor of 100 nF or less to VSS."
      },
      {
        "number": "4",
        "name": "ADCINA6/AIO6",
        "type": "input",
        "description": "ADC Group A channel 6 analog input (also digital AIO6); ADC full-scale range is 0 to 3.3 V."
      },
      {
        "number": "5",
        "name": "ADCINA4/COMP2A/AIO4",
        "type": "input",
        "description": "ADC Group A channel 4 analog input, also Comparator 2A input and AIO4; Comparator 2 is available only on the 48-pin device."
      },
      {
        "number": "6",
        "name": "ADCINA7",
        "type": "input",
        "description": "ADC Group A channel 7 analog input with 0 to 3.3 V full-scale range."
      },
      {
        "number": "7",
        "name": "ADCINA3",
        "type": "input",
        "description": "ADC Group A channel 3 analog input with 0 to 3.3 V full-scale range."
      },
      {
        "number": "8",
        "name": "ADCINA1",
        "type": "input",
        "description": "ADC Group A channel 1 analog input with 0 to 3.3 V full-scale range."
      },
      {
        "number": "9",
        "name": "ADCINA2/COMP1A/AIO2",
        "type": "input",
        "description": "ADC Group A channel 2 analog input, also Comparator 1A input and AIO2."
      },
      {
        "number": "10",
        "name": "ADCINA0/VREFHI",
        "type": "input",
        "description": "ADC Group A channel 0 analog input; doubles as ADC external reference high (VREFHI), used only in external reference mode and must not exceed VDDA."
      },
      {
        "number": "11",
        "name": "VDDA",
        "type": "power_in",
        "description": "Analog power pin; tie with a 2.2-µF capacitor (typical) close to the pin."
      },
      {
        "number": "12",
        "name": "VSSA/VREFLO",
        "type": "power_in",
        "description": "Analog ground pin, which also serves as ADC external reference low (VREFLO) and is always tied to ground."
      },
      {
        "number": "13",
        "name": "ADCINB1",
        "type": "input",
        "description": "ADC Group B channel 1 analog input with 0 to 3.3 V full-scale range."
      },
      {
        "number": "14",
        "name": "ADCINB2/COMP1B/AIO10",
        "type": "input",
        "description": "ADC Group B channel 2 analog input, also Comparator 1B input and AIO10."
      },
      {
        "number": "15",
        "name": "ADCINB3",
        "type": "input",
        "description": "ADC Group B channel 3 analog input with 0 to 3.3 V full-scale range."
      },
      {
        "number": "16",
        "name": "ADCINB4/COMP2B/AIO12",
        "type": "input",
        "description": "ADC Group B channel 4 analog input, also Comparator 2B input and AIO12; Comparator 2 is available only on the 48-pin device."
      },
      {
        "number": "17",
        "name": "ADCINB6/AIO14",
        "type": "input",
        "description": "ADC Group B channel 6 analog input (also digital AIO14)."
      },
      {
        "number": "18",
        "name": "ADCINB7",
        "type": "input",
        "description": "ADC Group B channel 7 analog input with 0 to 3.3 V full-scale range."
      },
      {
        "number": "19",
        "name": "GPIO34/COMP2OUT",
        "type": "bidirectional",
        "description": "General-purpose I/O 34 with direct Comparator 2 output; may glitch during power-up when the on-chip VREG is used and is not glitch-free."
      },
      {
        "number": "20",
        "name": "GPIO35 (TDI)",
        "type": "bidirectional",
        "description": "General-purpose I/O 35 shared with JTAG test data input (TDI, internal pullup), clocked on the rising edge of TCK; may glitch during power-up when the on-chip VREG is used."
      },
      {
        "number": "21",
        "name": "GPIO36 (TMS)",
        "type": "bidirectional",
        "description": "General-purpose I/O 36 shared with JTAG test-mode select (TMS, internal pullup), clocked into the TAP controller on the rising edge of TCK; may glitch during power-up when the on-chip VREG is used."
      },
      {
        "number": "22",
        "name": "GPIO37/TDO",
        "type": "tri_state",
        "description": "General-purpose I/O 37 shared with JTAG scan output TDO (8-mA drive), shifted out on the falling edge of TCK; may glitch during power-up when the on-chip VREG is used."
      },
      {
        "number": "23",
        "name": "GPIO38/XCLKIN (TCK)",
        "type": "bidirectional",
        "description": "General-purpose I/O 38 shared with JTAG test clock (TCK, internal pullup) and external oscillator input XCLKIN; the external clock path must be disabled during JTAG debug to avoid contention with TCK."
      },
      {
        "number": "24",
        "name": "GPIO18/SPICLKA/SCITXDA/XCLKOUT",
        "type": "bidirectional",
        "description": "General-purpose I/O 18 shared with SPI-A clock, SCI-A transmit and XCLKOUT output (SYSCLKOUT divided by 1, 2 or 4; reset value SYSCLKOUT/4); the GPIO18 mux must be set to XCLKOUT for it to reach the pin."
      },
      {
        "number": "25",
        "name": "GPIO19/XCLKIN/SPISTEA/SCIRXDA/ECAP1",
        "type": "bidirectional",
        "description": "General-purpose I/O 19 shared with external oscillator input XCLKIN, SPI-A slave transmit enable, SCI-A receive and eCAP1; may glitch during power-up when the on-chip VREG is used."
      },
      {
        "number": "26",
        "name": "GPIO17/SPISOMIA/TZ3",
        "type": "bidirectional",
        "description": "General-purpose I/O 17 shared with SPI-A slave out/master in and trip zone 3 input."
      },
      {
        "number": "27",
        "name": "GPIO16/SPISIMOA/TZ2",
        "type": "bidirectional",
        "description": "General-purpose I/O 16 shared with SPI-A slave in/master out and trip zone 2 input."
      },
      {
        "number": "28",
        "name": "GPIO1/EPWM1B/COMP1OUT",
        "type": "bidirectional",
        "description": "General-purpose I/O 1 shared with Enhanced PWM1 output B and the direct output of Comparator 1."
      },
      {
        "number": "29",
        "name": "GPIO0/EPWM1A",
        "type": "bidirectional",
        "description": "General-purpose I/O 0 shared with Enhanced PWM1 output A and HRPWM channel; PWM pin pullups are not enabled at reset."
      },
      {
        "number": "30",
        "name": "TEST",
        "type": "bidirectional",
        "description": "Test pin reserved for TI; must be left unconnected."
      },
      {
        "number": "31",
        "name": "GPIO32/SDAA/EPWMSYNCI/ADCSOCAO",
        "type": "bidirectional",
        "description": "General-purpose I/O 32 shared with I2C-A data (open-drain bidirectional), EPWM external sync input and ADC start-of-conversion A output."
      },
      {
        "number": "32",
        "name": "VDD",
        "type": "power_in",
        "description": "CPU and logic digital power pin; when using the internal VREG, place one 1.2-µF capacitor between each VDD pin and ground."
      },
      {
        "number": "33",
        "name": "VSS",
        "type": "power_in",
        "description": "Digital ground pin."
      },
      {
        "number": "34",
        "name": "VREGENZ",
        "type": "input",
        "description": "Internal voltage regulator enable with internal pulldown; tie to VSS to enable the internal 1.8-V VREG, or tie to VDDIO to disable it and use an external 1.8-V supply."
      },
      {
        "number": "35",
        "name": "VDDIO",
        "type": "power_in",
        "description": "Digital I/O buffer and flash memory power pin; single supply source when VREG is enabled, with a decoupling capacitor sized per the system voltage regulation solution."
      },
      {
        "number": "36",
        "name": "GPIO33/SCLA/EPWMSYNCO/ADCSOCBO",
        "type": "bidirectional",
        "description": "General-purpose I/O 33 shared with I2C-A clock (open-drain bidirectional), EPWM external sync output and ADC start-of-conversion B output."
      },
      {
        "number": "37",
        "name": "GPIO2/EPWM2A",
        "type": "bidirectional",
        "description": "General-purpose I/O 2 shared with Enhanced PWM2 output A and HRPWM channel."
      },
      {
        "number": "38",
        "name": "GPIO3/EPWM2B/COMP2OUT",
        "type": "bidirectional",
        "description": "General-purpose I/O 3 shared with Enhanced PWM2 output B and direct Comparator 2 output (48-pin device only)."
      },
      {
        "number": "39",
        "name": "GPIO4/EPWM3A",
        "type": "bidirectional",
        "description": "General-purpose I/O 4 shared with Enhanced PWM3 output A and HRPWM channel."
      },
      {
        "number": "40",
        "name": "GPIO5/EPWM3B/ECAP1",
        "type": "bidirectional",
        "description": "General-purpose I/O 5 shared with Enhanced PWM3 output B and Enhanced Capture input/output 1."
      },
      {
        "number": "41",
        "name": "GPIO6/EPWM4A/EPWMSYNCI/EPWMSYNCO",
        "type": "bidirectional",
        "description": "General-purpose I/O 6 shared with Enhanced PWM4 output A (HRPWM channel), external ePWM sync pulse input and external ePWM sync pulse output."
      },
      {
        "number": "42",
        "name": "GPIO7/EPWM4B/SCIRXDA",
        "type": "bidirectional",
        "description": "General-purpose I/O 7 shared with Enhanced PWM4 output B and SCI-A receive data."
      },
      {
        "number": "43",
        "name": "VDD",
        "type": "power_in",
        "description": "CPU and logic digital power pin; when using the internal VREG, place one 1.2-µF capacitor between each VDD pin and ground."
      },
      {
        "number": "44",
        "name": "VSS",
        "type": "power_in",
        "description": "Digital ground pin."
      },
      {
        "number": "45",
        "name": "X1",
        "type": "input",
        "description": "On-chip 1.8-V crystal oscillator input; a quartz crystal or ceramic resonator connects across X1 and X2, and the pin must be tied to GND if not used."
      },
      {
        "number": "46",
        "name": "X2",
        "type": "output",
        "description": "On-chip crystal oscillator output; a quartz crystal or ceramic resonator connects across X1 and X2, and the pin must be left unconnected if not used."
      },
      {
        "number": "47",
        "name": "GPIO12/TZ1/SCITXDA",
        "type": "bidirectional",
        "description": "General-purpose I/O 12 shared with trip zone 1 input and SCI-A transmit data."
      },
      {
        "number": "48",
        "name": "GPIO28/SCIRXDA/SDAA/TZ2",
        "type": "bidirectional",
        "description": "General-purpose I/O 28 shared with SCI receive data, I2C-A data (open-drain bidirectional) and trip zone 2 input."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin 12 is printed as a combined VSSA/VREFLO pin in Figure 7-1 and the PT column; VREFLO has no separ; The extracted text of the 48-pin pin diagram (Figure 7-1) is partly scrambled. Pin assignments were ; TEST (pin 30) is typed bidirectional per the datasheet's I/O classification, but the datasheet requi"
        ],
        "pages_sent": 34,
        "cost_usd": 0.2577,
        "at": "2026-11-13T19:43:52"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/tms320f28027f.pdf",
        "pages": 147,
        "sha256": "01257f3966342887",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 48,
        "described": 48,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tms320f28027fpttr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          9.0,
          9.0,
          1.5
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "9dea352d93177c2904afd7d7b68ea8855ce1ab691f69f8b3e13655600514b6bf",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tms320f28027fpttr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          9.0,
          9.0,
          1.5
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f2ce2ce53a625ab9efcc50bdc76e8f35a60fbb66604228cca80a547de2962ce6",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "PT0048A",
      "source_page": 144,
      "D": {
        "nom_mm": 7.0,
        "range_mm": [
          6.8,
          7.2
        ]
      },
      "E1": {
        "nom_mm": 7.0,
        "range_mm": [
          6.8,
          7.2
        ]
      },
      "E": {
        "nom_mm": 9.0,
        "range_mm": [
          8.8,
          9.2
        ]
      },
      "e": {
        "nom_mm": 0.5,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.6,
        "range_mm": [
          null,
          1.6
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "tms320f28027fpttr.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}