main
Ray Publish 0.1.0 19800da

TMS320F28027FPTTR

Texas Instruments · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-48(7x7)

TMS320F28027FPTTR from Texas Instruments, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GPIO29/SCITXDA/SCLA/TZ3 bidirectional General-purpose I/O 29 shared with SCI-A transmit, I2C-A clock (open-drain bidirectional) and trip zone 3 input; inputs are not 5-V tolerant.
2 TRST input JTAG test reset with internal pulldown; must be maintained low during normal operation and requires an external pulldown (2.2 kΩ generally adequate).
3 XRS bidirectional Device reset input and watchdog reset output (open-drain with internal pullup); driven low during power-on/brown-out and for 512 OSCCLK cycles on watchdog reset, with a 2.2 kΩ to 10 kΩ pullup to VDDIO and a capacitor of 100 nF or less to VSS.
4 ADCINA6/AIO6 input ADC Group A channel 6 analog input (also digital AIO6); ADC full-scale range is 0 to 3.3 V.
5 ADCINA4/COMP2A/AIO4 input ADC Group A channel 4 analog input, also Comparator 2A input and AIO4; Comparator 2 is available only on the 48-pin device.
6 ADCINA7 input ADC Group A channel 7 analog input with 0 to 3.3 V full-scale range.
7 ADCINA3 input ADC Group A channel 3 analog input with 0 to 3.3 V full-scale range.
8 ADCINA1 input ADC Group A channel 1 analog input with 0 to 3.3 V full-scale range.
9 ADCINA2/COMP1A/AIO2 input ADC Group A channel 2 analog input, also Comparator 1A input and AIO2.
10 ADCINA0/VREFHI input ADC Group A channel 0 analog input; doubles as ADC external reference high (VREFHI), used only in external reference mode and must not exceed VDDA.
11 VDDA power_in Analog power pin; tie with a 2.2-µF capacitor (typical) close to the pin.
12 VSSA/VREFLO power_in Analog ground pin, which also serves as ADC external reference low (VREFLO) and is always tied to ground.
13 ADCINB1 input ADC Group B channel 1 analog input with 0 to 3.3 V full-scale range.
14 ADCINB2/COMP1B/AIO10 input ADC Group B channel 2 analog input, also Comparator 1B input and AIO10.
15 ADCINB3 input ADC Group B channel 3 analog input with 0 to 3.3 V full-scale range.
16 ADCINB4/COMP2B/AIO12 input ADC Group B channel 4 analog input, also Comparator 2B input and AIO12; Comparator 2 is available only on the 48-pin device.
17 ADCINB6/AIO14 input ADC Group B channel 6 analog input (also digital AIO14).
18 ADCINB7 input ADC Group B channel 7 analog input with 0 to 3.3 V full-scale range.
19 GPIO34/COMP2OUT bidirectional General-purpose I/O 34 with direct Comparator 2 output; may glitch during power-up when the on-chip VREG is used and is not glitch-free.
20 GPIO35 (TDI) bidirectional General-purpose I/O 35 shared with JTAG test data input (TDI, internal pullup), clocked on the rising edge of TCK; may glitch during power-up when the on-chip VREG is used.
21 GPIO36 (TMS) bidirectional General-purpose I/O 36 shared with JTAG test-mode select (TMS, internal pullup), clocked into the TAP controller on the rising edge of TCK; may glitch during power-up when the on-chip VREG is used.
22 GPIO37/TDO tri_state General-purpose I/O 37 shared with JTAG scan output TDO (8-mA drive), shifted out on the falling edge of TCK; may glitch during power-up when the on-chip VREG is used.
23 GPIO38/XCLKIN (TCK) bidirectional General-purpose I/O 38 shared with JTAG test clock (TCK, internal pullup) and external oscillator input XCLKIN; the external clock path must be disabled during JTAG debug to avoid contention with TCK.
24 GPIO18/SPICLKA/SCITXDA/XCLKOUT bidirectional General-purpose I/O 18 shared with SPI-A clock, SCI-A transmit and XCLKOUT output (SYSCLKOUT divided by 1, 2 or 4; reset value SYSCLKOUT/4); the GPIO18 mux must be set to XCLKOUT for it to reach the pin.
25 GPIO19/XCLKIN/SPISTEA/SCIRXDA/ECAP1 bidirectional General-purpose I/O 19 shared with external oscillator input XCLKIN, SPI-A slave transmit enable, SCI-A receive and eCAP1; may glitch during power-up when the on-chip VREG is used.
26 GPIO17/SPISOMIA/TZ3 bidirectional General-purpose I/O 17 shared with SPI-A slave out/master in and trip zone 3 input.
27 GPIO16/SPISIMOA/TZ2 bidirectional General-purpose I/O 16 shared with SPI-A slave in/master out and trip zone 2 input.
28 GPIO1/EPWM1B/COMP1OUT bidirectional General-purpose I/O 1 shared with Enhanced PWM1 output B and the direct output of Comparator 1.
29 GPIO0/EPWM1A bidirectional General-purpose I/O 0 shared with Enhanced PWM1 output A and HRPWM channel; PWM pin pullups are not enabled at reset.
30 TEST bidirectional Test pin reserved for TI; must be left unconnected.
31 GPIO32/SDAA/EPWMSYNCI/ADCSOCAO bidirectional General-purpose I/O 32 shared with I2C-A data (open-drain bidirectional), EPWM external sync input and ADC start-of-conversion A output.
32 VDD power_in CPU and logic digital power pin; when using the internal VREG, place one 1.2-µF capacitor between each VDD pin and ground.
33 VSS power_in Digital ground pin.
34 VREGENZ input Internal voltage regulator enable with internal pulldown; tie to VSS to enable the internal 1.8-V VREG, or tie to VDDIO to disable it and use an external 1.8-V supply.
35 VDDIO power_in Digital I/O buffer and flash memory power pin; single supply source when VREG is enabled, with a decoupling capacitor sized per the system voltage regulation solution.
36 GPIO33/SCLA/EPWMSYNCO/ADCSOCBO bidirectional General-purpose I/O 33 shared with I2C-A clock (open-drain bidirectional), EPWM external sync output and ADC start-of-conversion B output.
37 GPIO2/EPWM2A bidirectional General-purpose I/O 2 shared with Enhanced PWM2 output A and HRPWM channel.
38 GPIO3/EPWM2B/COMP2OUT bidirectional General-purpose I/O 3 shared with Enhanced PWM2 output B and direct Comparator 2 output (48-pin device only).
39 GPIO4/EPWM3A bidirectional General-purpose I/O 4 shared with Enhanced PWM3 output A and HRPWM channel.
40 GPIO5/EPWM3B/ECAP1 bidirectional General-purpose I/O 5 shared with Enhanced PWM3 output B and Enhanced Capture input/output 1.
41 GPIO6/EPWM4A/EPWMSYNCI/EPWMSYNCO bidirectional General-purpose I/O 6 shared with Enhanced PWM4 output A (HRPWM channel), external ePWM sync pulse input and external ePWM sync pulse output.
42 GPIO7/EPWM4B/SCIRXDA bidirectional General-purpose I/O 7 shared with Enhanced PWM4 output B and SCI-A receive data.
43 VDD power_in CPU and logic digital power pin; when using the internal VREG, place one 1.2-µF capacitor between each VDD pin and ground.
44 VSS power_in Digital ground pin.
45 X1 input On-chip 1.8-V crystal oscillator input; a quartz crystal or ceramic resonator connects across X1 and X2, and the pin must be tied to GND if not used.
46 X2 output On-chip crystal oscillator output; a quartz crystal or ceramic resonator connects across X1 and X2, and the pin must be left unconnected if not used.
47 GPIO12/TZ1/SCITXDA bidirectional General-purpose I/O 12 shared with trip zone 1 input and SCI-A transmit data.
48 GPIO28/SCIRXDA/SDAA/TZ2 bidirectional General-purpose I/O 28 shared with SCI receive data, I2C-A data (open-drain bidirectional) and trip zone 2 input.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package LQFP-48(7x7)
Category Single Chip Microcomputer/Microcontroller
Pins 48

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDDIO (I/O and Flash) with respect to VSS VDDIO -0.3 4.6 V with respect to VSS 15
Supply voltage VDD with respect to VSS VDD -0.3 2.5 V with respect to VSS 15
Analog voltage VDDA with respect to VSSA VDDA -0.3 4.6 V with respect to VSSA 15
Input voltage VIN (3.3 V) VIN -0.3 4.6 V 15
Input voltage VIN (X1) VIN (X1) -0.3 2.5 V 15
Output voltage VO -0.3 4.6 V 15
Input clamp current, digital/analog input (per pin) IIK -20 20 mA VIN < VSS or VIN > VDDIO 15
Input clamp current, analog input (per pin) IIKANALOG -20 20 mA VIN < VSSA or VIN > VDDA 15
Input clamp current, total for all inputs IIKTOTAL -20 20 mA VIN < VSS/VSSA or VIN > VDDIO/VDDA 15
Output clamp current IOK -20 20 mA VO < 0 or VO > VDDIO 15
Junction temperature TJ -40 150 °C 15
Storage temperature Tstg -65 150 °C 15
Device supply voltage, I/O VDDIO 2.97 3.3 3.63 V 16
Device supply voltage CPU (internal VREG disabled and 1.8 V supplied externally) VDD 1.71 1.8 1.995 V 16
Analog supply voltage VDDA 2.97 3.3 3.63 V 16
Device clock frequency (system clock), 28026/28027 2 60 MHz 16
High-level input voltage (3.3 V) VIH 2 V 16
Low-level input voltage (3.3 V) VIL 0.8 V 16
High-level output source current, all GPIO/AIO pins IOH -4 mA VOH = VOH(MIN) 16
High-level output source current, Group 2 pins IOH -8 mA VOH = VOH(MIN); Group 2 pins 16
Low-level output sink current, all GPIO/AIO pins IOL 4 mA VOL = VOL(MAX) 16
Low-level output sink current, Group 2 pins IOL 8 mA VOL = VOL(MAX); Group 2 pins 16
Junction temperature, T version TJ -40 105 °C T version 16
High-level output voltage VOH 2.4 V IOH = IOH MAX 21
Low-level output voltage VOL 0.4 V IOL = IOL MAX 21
Input current (low level), pin with pullup enabled, all GPIO IIL -80 -140 -205 μA VDDIO = 3.3 V, VIN = 0 V 21
Input current (low level), XRS pin IIL -225 -290 -360 μA VDDIO = 3.3 V, VIN = 0 V, pin with pullup enabled 21
Input current (low level), pin with pulldown enabled IIL -2 2 μA VDDIO = 3.3 V, VIN = 0 V 21
Input current (high level), pin with pullup enabled IIH -2 2 μA VDDIO = 3.3 V, VIN = VDDIO 22
Input current (high level), pin with pulldown enabled IIH 28 50 80 μA VDDIO = 3.3 V, VIN = VDDIO 22
Output current, pullup or pulldown disabled IOZ -2 2 μA VO = VDDIO or 0 V 22
VDDIO BOR trip point, falling VDDIO 2.42 2.65 3.135 V Falling VDDIO 22
Supervisor reset release delay time 400 800 μs Time after BOR/POR/OVR event is removed to XRS release 22
ADC clock, 60-MHz device 0.001 60 MHz 74
ADC sample window, 28027/26/23/22 7 64 ADC clocks 74
INL (integral nonlinearity) at ADC clock ≤ 30 MHz -4 4 LSB ADC clock ≤ 30 MHz 74
DNL (differential nonlinearity) at ADC clock ≤ 30 MHz -1 1 LSB ADC clock ≤ 30 MHz, no missing codes 74
Offset error, executing Device_Cal function -20 0 20 LSB Executing Device_Cal function 74
Offset error, executing periodic self-recalibration -4 0 4 LSB Executing periodic self-recalibration 74
Overall gain error with internal reference -60 60 LSB Internal reference 74
Overall gain error with external reference -40 40 LSB External reference 74
VREFLO current VREFLO -100 μA 74
VREFHI current VREFHI 100 μA 74
Analog input voltage with internal reference 0 3.3 V Internal reference 74
Input leakage current -5 5 μA 74
Comparator input offset -5 5 mV 83
Comparator response time to PWM trip zone (async) 30 ns 83
DAC INL -3 3 LSB 83
IDD operational current, VREG disabled IDD 62 70 mA Operational (Flash), 40-MHz SYSCLKOUT, VREG disabled 17
IDDIO operational current, VREG enabled IDDIO 70 80 mA Operational (Flash), 40-MHz SYSCLKOUT, VREG enabled 17
IDD IDLE current, VREG disabled IDD 15 17 mA IDLE, 40-MHz SYSCLKOUT, VREG disabled 17
IDD STANDBY current, VREG disabled IDD 3 6 mA STANDBY, 40-MHz SYSCLKOUT, VREG disabled 17
Random Flash access time ta(fr) 40 ns 34
Paged Flash access time ta(fp) 40 ns 34
OTP access time ta(OTP) 60 ns 34
Flash endurance for the array (write/erase cycles), T material Nf 20000 50000 cycles 0°C to 105°C (ambient) 33
Junction-to-case thermal resistance RΘJC 13.6 °C/W N/A air flow 23
Junction-to-board thermal resistance RΘJB 30.6 °C/W N/A air flow 23
Junction-to-free air thermal resistance (High k PCB) RΘJA 64 °C/W 0 lfm 23
Junction-to-free air thermal resistance (High k PCB) RΘJA 45 °C/W 500 lfm 23

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing PCT TBPRDHR 0x6806 0x6846 0x6886 0x68C6 1 / 1 Time Base Period High Resolution Register(1) CMPCTL 0x6807 0x6847 0x6887 0x68C7 1 / 0 Counter Compare Control Register 99

CAD (KiCad official)

  • Symbol: TMS320F28027FPTTR
  • Footprint: Package_QFP:LQFP-48_7x7mm_P0.5mm
  • 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: tms320f28027fpttr-etched.step / tms320f28027fpttr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tms320f28027fpttr.step / tms320f28027fpttr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (147 pp, sha256 01257f3966342887, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF