main
Ray
Publish 0.1.0
8dc38ff
TMP4718ADGKR
Texas Instruments · IC · VSSOP-8
TMP4718ADGKR from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Supply pin; bypass to GND with a 0.1-µF capacitor, with a recommended supply range of 1.62 V to 5.5 V. |
| 2 | DP | bidirectional | Positive connection to the remote temperature sensor; connect DP to DN if no remote diode is used, and a 470-pF capacitor between DP and DN can be added for noise filtering if needed. |
| 3 | DN | bidirectional | Negative connection to the remote temperature sensor; connect DP to DN if no remote diode is used, and a 470-pF capacitor between DP and DN can be added for noise filtering if needed. |
| 4 | T_CRIT | bidirectional | Open-drain critical temperature alert pin that requires a pullup resistor to VDD (or a separate bus), whose value sets the default T_CRIT and ALERT high-temperature limits. |
| 5 | GND | power_in | Ground connection. |
| 6 | ALERT | bidirectional | Open-drain temperature alert pin that requires a pullup resistor to VDD (or a separate bus), whose value sets the default T_CRIT and ALERT high-temperature limits. |
| 7 | SDA | bidirectional | Open-drain serial data line that requires a pullup resistor; absolute maximum I/O voltage is 6 V and I/O current is limited to 10 mA. |
| 8 | SCL | input | Open-drain serial clock input line; I2C clock stretching is not supported. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | -0.3 | 6 | V | 5 | ||
| I/O voltage DP | -0.3 | 1.65 | V | 5 | |||
| I/O voltage DN | -0.3 | 0.3 | V | 5 | |||
| I/O voltage ALERT, T_CRIT, SCL, SDA | -0.3 | 6 | V | 5 | |||
| I/O current ALERT, T_CRIT, SDA | -10 | 10 | mA | 5 | |||
| Operating junction temperature | TJ | -55 | 150 | °C | 5 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| Supply voltage | VDD | 1.62 | 3.3 | 5.5 | V | 5 | |
| I/O voltage DP | VI/O | 0 | 1.2 | V | 5 | ||
| I/O voltage DN | VI/O | 0 | 0 | V | 5 | ||
| I/O voltage ALERT, T_CRIT, SCL, SDA | VI/O | 0 | 5.5 | V | 5 | ||
| I/O current ALERT, T_CRIT, SDA | II/O | 3 | mA | 5 | |||
| Operating ambient temperature | TA | -40 | 125 | °C | 5 | ||
| Local temperature accuracy | TERR_L | -1 | 1 | °C | TA = -40°C to 125°C | 6 | |
| Remote temperature accuracy (optimized for MMBT3904 NPN transistor) | TERR_R | -0.8 | 0.8 | °C | TD = -10°C to 85°C, TA = -10°C to 85°C | 6 | |
| Remote temperature accuracy (optimized for MMBT3904 NPN transistor) | TERR_R | -1 | 1 | °C | TD = -55°C to 125°C, TA = -10°C to 85°C | 6 | |
| Remote temperature accuracy (optimized for MMBT3904 NPN transistor) | TERR_R | -1.5 | 1.5 | °C | TD = -55°C to 125°C, TA = -40°C to 125°C | 6 | |
| Conversion time, local conversion only | tCONV | 16 | 17.7 | 19.4 | ms | Local conversion only, one-shot mode | 6 |
| Conversion time, remote + local conversion | tCONV | 32 | 34.3 | 37 | ms | Remote conversion + local conversion, one-shot mode | 6 |
| Timing variation | tVAR | -10 | 10 | % | Conversion period | 6 | |
| ALERT and T_CRIT pullup resistor tolerance requirement | RTOL | -1 | 1 | % | 6 | ||
| Input logic high level | VIH | 0.9 | V | SCL, SDA | 6 | ||
| Input logic low level | VIL | 0.4 | V | SCL, SDA | 6 | ||
| Input leakage current | ILI | -0.1 | 0.1 | μA | ALERT, T_CRIT, SCL, SDA | 6 | |
| Output leakage current | ILO | -0.1 | 0.1 | μA | ALERT, T_CRIT, SDA | 6 | |
| Output low level | VOL | 0.4 | V | ALERT, T_CRIT, SDA, IOL = 3 mA | 6 | ||
| Active conversion current, local sensor | IDD_ACTIVE | 100 | 150 | μA | TA = -40°C to 125°C, serial bus inactive, local sensor | 6 | |
| Active conversion current, remote sensor | IDD_ACTIVE | 220 | 320 | μA | TA = -40°C to 125°C, serial bus inactive, remote sensor | 6 | |
| Standby current | IDD_SB | 1 | 1.5 | μA | Serial bus inactive, TA = 25°C | 6 | |
| Standby current | IDD_SB | 5.5 | μA | Serial bus inactive, TA = -40°C to 125°C | 6 | ||
| Shutdown current | IDD_SD | 0.5 | 0.8 | μA | Serial bus inactive, TA = 25°C | 7 | |
| Shutdown current | IDD_SD | 5 | μA | Serial bus inactive, TA = -40°C to 125°C | 7 | ||
| Shutdown current, serial bus active | IDD_SD | 6.9 | μA | Serial bus active, fs = 400 kHz | 7 | ||
| Shutdown current, serial bus active | IDD_SD | 15.2 | μA | Serial bus active, fs = 1 MHz | 7 | ||
| Power-on reset threshold voltage | VPOR | 1.2 | 1.4 | V | Supply rising | 7 | |
| Brownout detect | 1 | 1.1 | V | Supply falling | 7 | ||
| Device initialization time | tPOR | 35 | ms | 7 | |||
| Maximum supported forward diode voltage | VFMAX | 1.1 | V | 6 | |||
| Maximum supported series resistance on remote channel | RSERIES | 1000 | Ω | 6 | |||
| SCL operating frequency | f(SCL) | 1 | 100 | kHz | Standard mode | 7 | |
| SCL operating frequency | f(SCL) | 1 | 400 | kHz | Fast mode | 7 | |
| SCL operating frequency | f(SCL) | 1 | 1000 | kHz | Fast mode plus | 7 | |
| SCL clock low period | t(LOW) | 4.7 | µs | Standard mode | 7 | ||
| SCL clock low period | t(LOW) | 1.3 | µs | Fast mode | 7 | ||
| SCL clock low period | t(LOW) | 0.5 | µs | Fast mode plus | 7 | ||
| SCL clock high period | t(HIGH) | 4 | µs | Standard mode | 7 | ||
| SCL clock high period | t(HIGH) | 0.6 | µs | Fast mode | 7 | ||
| SCL clock high period | t(HIGH) | 0.26 | µs | Fast mode plus | 7 | ||
| Data setup time | t(SUDAT) | 250 | ns | Standard mode | 7 | ||
| Data setup time | t(SUDAT) | 100 | ns | Fast mode | 7 | ||
| Data setup time | t(SUDAT) | 50 | ns | Fast mode plus | 7 | ||
| Timeout (SCL = GND) | ttimeout | 20 | 30 | ms | SCL = GND, Standard mode | 7 | |
| Junction-to-ambient thermal resistance | RθJA | 185.7 | °C/W | 5 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 76.3 | °C/W | 5 | |||
| Junction-to-board thermal resistance | RθJB | 107.5 | °C/W | 5 | |||
| Junction-to-top characterization parameter | ψJT | 16.8 | °C/W | 5 | |||
| Junction-to-board characterization parameter | ψJB | 105.9 | °C/W | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| shell | copper | shield them from extrinsic noise sources. 5-mil (0.127 mm) PCB traces are recommended. 3. Minimize additional thermocouple junction induced offset voltage caused by copper-to-solder connections. | 41 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
TMP4718ADGKR - Footprint:
Package_SO:VSSOP-8_3x3mm_P0.65mm - 3D model: VSSOP-8, generated on the KiCad land (body 3 x 3 mm, terminals on the pads, 1.1 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tmp4718adgkr-etched.step/tmp4718adgkr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tmp4718adgkr.step/tmp4718adgkr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (50 pp, sha256
b66639856d88a4c2, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# TMP4718ADGKR
**Texas Instruments** · IC · VSSOP-8
TMP4718ADGKR from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Supply pin; bypass to GND with a 0.1-µF capacitor, with a recommended supply range of 1.62 V to 5.5 V. |
| 2 | DP | bidirectional | Positive connection to the remote temperature sensor; connect DP to DN if no remote diode is used, and a 470-pF capacitor between DP and DN can be added for noise filtering if needed. |
| 3 | DN | bidirectional | Negative connection to the remote temperature sensor; connect DP to DN if no remote diode is used, and a 470-pF capacitor between DP and DN can be added for noise filtering if needed. |
| 4 | T_CRIT | bidirectional | Open-drain critical temperature alert pin that requires a pullup resistor to VDD (or a separate bus), whose value sets the default T_CRIT and ALERT high-temperature limits. |
| 5 | GND | power_in | Ground connection. |
| 6 | ALERT | bidirectional | Open-drain temperature alert pin that requires a pullup resistor to VDD (or a separate bus), whose value sets the default T_CRIT and ALERT high-temperature limits. |
| 7 | SDA | bidirectional | Open-drain serial data line that requires a pullup resistor; absolute maximum I/O voltage is 6 V and I/O current is limited to 10 mA. |
| 8 | SCL | input | Open-drain serial clock input line; I2C clock stretching is not supported. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | -0.3 | | 6 | V | | 5 |
| I/O voltage DP | | -0.3 | | 1.65 | V | | 5 |
| I/O voltage DN | | -0.3 | | 0.3 | V | | 5 |
| I/O voltage ALERT, T_CRIT, SCL, SDA | | -0.3 | | 6 | V | | 5 |
| I/O current ALERT, T_CRIT, SDA | | -10 | | 10 | mA | | 5 |
| Operating junction temperature | TJ | -55 | | 150 | °C | | 5 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 5 |
| Supply voltage | VDD | 1.62 | 3.3 | 5.5 | V | | 5 |
| I/O voltage DP | VI/O | 0 | | 1.2 | V | | 5 |
| I/O voltage DN | VI/O | 0 | | 0 | V | | 5 |
| I/O voltage ALERT, T_CRIT, SCL, SDA | VI/O | 0 | | 5.5 | V | | 5 |
| I/O current ALERT, T_CRIT, SDA | II/O | | | 3 | mA | | 5 |
| Operating ambient temperature | TA | -40 | | 125 | °C | | 5 |
| Local temperature accuracy | TERR_L | -1 | | 1 | °C | TA = -40°C to 125°C | 6 |
| Remote temperature accuracy (optimized for MMBT3904 NPN transistor) | TERR_R | -0.8 | | 0.8 | °C | TD = -10°C to 85°C, TA = -10°C to 85°C | 6 |
| Remote temperature accuracy (optimized for MMBT3904 NPN transistor) | TERR_R | -1 | | 1 | °C | TD = -55°C to 125°C, TA = -10°C to 85°C | 6 |
| Remote temperature accuracy (optimized for MMBT3904 NPN transistor) | TERR_R | -1.5 | | 1.5 | °C | TD = -55°C to 125°C, TA = -40°C to 125°C | 6 |
| Conversion time, local conversion only | tCONV | 16 | 17.7 | 19.4 | ms | Local conversion only, one-shot mode | 6 |
| Conversion time, remote + local conversion | tCONV | 32 | 34.3 | 37 | ms | Remote conversion + local conversion, one-shot mode | 6 |
| Timing variation | tVAR | -10 | | 10 | % | Conversion period | 6 |
| ALERT and T_CRIT pullup resistor tolerance requirement | RTOL | -1 | | 1 | % | | 6 |
| Input logic high level | VIH | 0.9 | | | V | SCL, SDA | 6 |
| Input logic low level | VIL | | | 0.4 | V | SCL, SDA | 6 |
| Input leakage current | ILI | -0.1 | | 0.1 | μA | ALERT, T_CRIT, SCL, SDA | 6 |
| Output leakage current | ILO | -0.1 | | 0.1 | μA | ALERT, T_CRIT, SDA | 6 |
| Output low level | VOL | | | 0.4 | V | ALERT, T_CRIT, SDA, IOL = 3 mA | 6 |
| Active conversion current, local sensor | IDD_ACTIVE | | 100 | 150 | μA | TA = -40°C to 125°C, serial bus inactive, local sensor | 6 |
| Active conversion current, remote sensor | IDD_ACTIVE | | 220 | 320 | μA | TA = -40°C to 125°C, serial bus inactive, remote sensor | 6 |
| Standby current | IDD_SB | | 1 | 1.5 | μA | Serial bus inactive, TA = 25°C | 6 |
| Standby current | IDD_SB | | | 5.5 | μA | Serial bus inactive, TA = -40°C to 125°C | 6 |
| Shutdown current | IDD_SD | | 0.5 | 0.8 | μA | Serial bus inactive, TA = 25°C | 7 |
| Shutdown current | IDD_SD | | | 5 | μA | Serial bus inactive, TA = -40°C to 125°C | 7 |
| Shutdown current, serial bus active | IDD_SD | | | 6.9 | μA | Serial bus active, fs = 400 kHz | 7 |
| Shutdown current, serial bus active | IDD_SD | | | 15.2 | μA | Serial bus active, fs = 1 MHz | 7 |
| Power-on reset threshold voltage | VPOR | 1.2 | | 1.4 | V | Supply rising | 7 |
| Brownout detect | | 1 | | 1.1 | V | Supply falling | 7 |
| Device initialization time | tPOR | | | 35 | ms | | 7 |
| Maximum supported forward diode voltage | VFMAX | | | 1.1 | V | | 6 |
| Maximum supported series resistance on remote channel | RSERIES | | | 1000 | Ω | | 6 |
| SCL operating frequency | f(SCL) | 1 | | 100 | kHz | Standard mode | 7 |
| SCL operating frequency | f(SCL) | 1 | | 400 | kHz | Fast mode | 7 |
| SCL operating frequency | f(SCL) | 1 | | 1000 | kHz | Fast mode plus | 7 |
| SCL clock low period | t(LOW) | 4.7 | | | µs | Standard mode | 7 |
| SCL clock low period | t(LOW) | 1.3 | | | µs | Fast mode | 7 |
| SCL clock low period | t(LOW) | 0.5 | | | µs | Fast mode plus | 7 |
| SCL clock high period | t(HIGH) | 4 | | | µs | Standard mode | 7 |
| SCL clock high period | t(HIGH) | 0.6 | | | µs | Fast mode | 7 |
| SCL clock high period | t(HIGH) | 0.26 | | | µs | Fast mode plus | 7 |
| Data setup time | t(SUDAT) | 250 | | | ns | Standard mode | 7 |
| Data setup time | t(SUDAT) | 100 | | | ns | Fast mode | 7 |
| Data setup time | t(SUDAT) | 50 | | | ns | Fast mode plus | 7 |
| Timeout (SCL = GND) | ttimeout | 20 | | 30 | ms | SCL = GND, Standard mode | 7 |
| Junction-to-ambient thermal resistance | RθJA | | 185.7 | | °C/W | | 5 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 76.3 | | °C/W | | 5 |
| Junction-to-board thermal resistance | RθJB | | 107.5 | | °C/W | | 5 |
| Junction-to-top characterization parameter | ψJT | | 16.8 | | °C/W | | 5 |
| Junction-to-board characterization parameter | ψJB | | 105.9 | | °C/W | | 5 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| shell | copper | | shield them from extrinsic noise sources. 5-mil (0.127 mm) PCB traces are recommended. 3. Minimize additional thermocouple junction induced offset voltage caused by copper-to-solder connections. | 41 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `TMP4718ADGKR`
- Footprint: `Package_SO:VSSOP-8_3x3mm_P0.65mm`
- 3D model: VSSOP-8, generated on the KiCad land (body 3 x 3 mm, terminals on the pads, 1.1 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `tmp4718adgkr-etched.step` / `tmp4718adgkr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tmp4718adgkr.step` / `tmp4718adgkr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/tmp4718.pdf) (50 pp, sha256 `b66639856d88a4c2`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/tmp4718adgkr-datasheet.pdf)