component
TMP435ADGSR
Public Made by Adomby adom
Texas Instruments Temperature Sensors, VSSOP-10-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTMP435ADGSR
Texas Instruments · Temperature Sensors · VSSOP-10-0.5mm
TMP435ADGSR from Texas Instruments, in a VSSOP-10-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | V+ | power_in | Positive supply voltage input, range 2.7V to 5.5V |
| 2 | DXP | input | Positive terminal of remote temperature sensor diode connection |
| 3 | DXN | input | Negative terminal of remote temperature sensor diode connection |
| 4 | A0 | input | Address selection pin 0, determines bits of SMBus I2C slave address |
| 5 | A1 | input | Address selection pin 1, determines bits of SMBus I2C slave address |
| 6 | GND | power_in | Ground reference, 0V |
| 7 | THERM | output | Thermal flag output, active low open-drain, requires pull-up resistor to V+ |
| 8 | ALERT/THERM2 | output | Alert output (reconfigurable as second thermal flag), active low open-drain, requires pull-up resistor to V+ |
| 9 | SDA | bidirectional | SMBus serial data line, open-drain, requires pull-up resistor to V+ |
| 10 | SCL | bidirectional | SMBus serial clock line, open-drain, requires pull-up resistor to V+ |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-10-0.5mm |
| Category | Sensors |
| Pins | 10 |
CAD (KiCad official)
- Symbol:
TMP435ADGSR - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: VSSOP-10-0.5mm (KiCad packages3D, STEP)
- 3D model files:
tmp435adgsr-etched.step/tmp435adgsr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tmp435adgsr.step/tmp435adgsr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (35 pp, sha256
bac87e7556bf42ef, retrieved 2026-10-03, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).