component
TMP411ADGKR
Public Made by Adomby adom
Texas Instruments Temperature Sensors, VSSOP-8-0.65mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTMP411ADGKR
Texas Instruments · Temperature Sensors · VSSOP-8-0.65mm
TMP411ADGKR from Texas Instruments, in a VSSOP-8-0.65mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | V+ | power_in | Positive power supply accepting 2.7V to 5.5V for TMP411 device operation. |
| 2 | D+ | input | Remote temperature sensor positive input connection with automatic series resistance compensation up to 3kΩ. |
| 3 | D- | input | Remote temperature sensor negative input connection, typically connected to system ground reference. |
| 4 | THERM | tri_state | Thermal flag open-drain output, active-low, requiring external pullup resistor to V+, asserts when local or remote temperature exceeds programmed THERM limit with selectable hysteresis. |
| 5 | GND | power_in | Ground reference voltage. |
| 6 | ALERT/THERM2 | tri_state | Alert interrupt or thermal flag 2 open-drain output, active-low, requiring external pullup resistor to V+, configurable between alert and THERM2 modes via configuration register bits. |
| 7 | SDA | bidirectional | SMBus/I2C serial data line with open-drain output, requires external pullup resistor to V+, supports data communication rates up to 3.4MHz. |
| 8 | SCL | input | SMBus/I2C serial clock input line with open-drain capability to hold clock low, requires external pullup resistor to V+. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8-0.65mm |
| Category | Sensors |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
TMP411ADGKR - Footprint:
Package_SO:VSSOP-8_2.3x2mm_P0.5mm - 3D model: VSSOP-8-0.65mm (KiCad packages3D, STEP)
- 3D model files:
tmp411adgkr-etched.step/tmp411adgkr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tmp411adgkr.step/tmp411adgkr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (63 pp, sha256
67ad9af43762d7cb, retrieved 2026-09-26, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).