# TMP36FSZ

**UMW** · Temperature Sensors · SOP-8

TMP36FSZ from UMW, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | output | Analog voltage output that is linearly proportional to Celsius temperature at 10 mV/°C, with low output impedance and stability with large capacitive loads (tested into 100 kΩ||100 pF). |
| 2 | NC | unconnected | No internal connection; the datasheet recommends that no electrical connections be made to this pin. |
| 3 | NC | unconnected | No internal connection; the datasheet recommends that no electrical connections be made to this pin. |
| 4 | GND | power_in | Ground reference pin for the device; the 0.1 µF bypass capacitor should be located close to the supply pin. |
| 5 | SHUTDOWN | input | Active-low /SHUTDOWN enable pin that reduces supply current to less than 0.5 µA when pulled low; if the shutdown feature is not needed it should be connected to +VS, and its absolute maximum voltage is +Vs per the ratings table. |
| 6 | NC | unconnected | No internal connection; the datasheet recommends that no electrical connections be made to this pin. |
| 7 | NC | unconnected | No internal connection; the datasheet recommends that no electrical connections be made to this pin. |
| 8 | +VS | power_in | Device supply pin for single-supply operation from 2.7 V to 5.5 V, with an absolute maximum supply of 6 V. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | UMW |
| Package | SOP-8 |
| Category | Sensors |
| Pins | 8 |

## CAD (KiCad official)

- Symbol: `TMP36FSZ`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `tmp36fsz-etched.step` / `tmp36fsz-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tmp36fsz.step` / `tmp36fsz.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [UMW datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8755887550760263680) (12 pp, sha256 `9efe1948b6f13ca7`, retrieved 2026-10-09, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/tmp36fsz-datasheet.pdf)