component
TMP1075DR
Public Made by Adomby adom
Texas Instruments Temperature Sensors, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTMP1075DR
Texas Instruments · Temperature Sensors · SOIC-8
TMP1075DR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SDA | bidirectional | Serial data open-drain I/O for I2C/SMBus interface, VIH 0.7(V+) min, VIL 0.3(V+) max, VOL 0.15-0.4V at IOL 3mA, input capacitance 5pF, requires external pullup resistor |
| 2 | SCL | input | Serial clock input for I2C/SMBus interface, VIH 0.7(V+) min, VIL 0.3(V+) max, input capacitance 5pF, supports fast mode to 400kHz and high-speed mode to 2.56MHz |
| 3 | ALERT | tri_state | Open-drain overtemperature alert output, VOL 0.15-0.4V at IOL 3mA, active low (POL=0) or active high (POL=1) configurable, requires external pullup resistor |
| 4 | GND | power_in | Ground connection |
| 5 | A2 | input | Address select pin A2, connect to GND or V+ only to configure device I2C address, input capacitance 5pF, state sampled on every bus communication |
| 6 | A1 | input | Address select pin A1, connect to GND, V+, SDA, or SCL to configure device I2C address, input capacitance 5pF, state sampled on every bus communication |
| 7 | A0 | input | Address select pin A0, connect to GND, V+, SDA, or SCL to configure device I2C address, input capacitance 5pF, state sampled on every bus communication |
| 8 | V+ | power_in | Positive supply voltage input, operating range 1.7-5.5V for TMP1075 (1.62-3.6V for TMP1075N), power-on reset threshold 1.22V, brown-out detect 1.1V, 0.01μF bypass capacitor required |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Sensors |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
TMP1075DR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
tmp1075dr-etched.step/tmp1075dr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tmp1075dr.step/tmp1075dr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (49 pp, sha256
266c9a50a80b1008, retrieved 2026-09-23, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).