Generated by kicad-footprint-generator · KiCad file format 20260206
TMP101NA
Texas Instruments · Temperature Sensors · SOT-23-6
TMP101NA from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SCL | input | Serial clock input for the I2C/SMBus interface; the datasheet pin table notes it requires a pullup resistor. |
| 2 | GND | power_in | Ground. |
| 3 | ALERT | output | Overtemperature alert output; open-drain and requires a pullup resistor. |
| 4 | V+ | power_in | Supply voltage, 2.7 V to 5.5 V. |
| 5 | ADD0 | input | Address select input; connect to GND, V+, or leave floating. |
| 6 | SDA | bidirectional | Serial data line; open-drain and requires a pullup resistor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Sensors |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply | V+ | 7.5 | V | 4 | |||
| Input voltage | -0.5 | 7.5 | V | applies to all TMP100 and TMP101 input voltages | 4 | ||
| Operating temperature | -55 | 125 | °C | 4 | |||
| Junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -60 | 150 | °C | 4 | ||
| ESD HBM | V(ESD) | -2000 | 2000 | V | Human body model (HBM), per ANSI/ESDA/JEDEC JS-001 | 4 | |
| ESD CDM | V(ESD) | -200 | 200 | V | Charged device model (CDM), per JEDEC specification JESD22-C101 | 4 | |
| Supply voltage | V+ | 2.7 | 5.5 | V | 4 | ||
| Operating free-air temperature | TA | -55 | 125 | °C | 4 | ||
| Junction-to-ambient thermal resistance | RθJA | 182.9 | °C/W | DBV (SOT-23), 6 pins | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 115 | °C/W | DBV (SOT-23), 6 pins | 4 | ||
| Junction-to-board thermal resistance | RθJB | 30.2 | °C/W | DBV (SOT-23), 6 pins | 4 | ||
| Accuracy (temperature error) | 0.5 | 2 | °C | −25°C to 85°C | 5 | ||
| Accuracy (temperature error) | 1 | 2 | °C | −55°C to 125°C | 5 | ||
| Accuracy (temperature error) vs supply | 0.2 | 0.5 | °C/V | 5 | |||
| Temperature range | -55 | 125 | °C | Range | 5 | ||
| High-level input logic | VIH | 6 | V | min 0.7 (V+) | 5 | ||
| Low-level input logic | VIL | -0.5 | V | max 0.3 (V+) | 5 | ||
| Input current | IIN | 1 | µA | 0 V ≤ VIN ≤ 6 V | 5 | ||
| Low-level output logic SDA | VOL | 0 | 0.15 | 0.4 | V | IOL = 3 mA | 5 |
| Low-level output logic ALERT | VOL | 0 | 0.15 | 0.4 | V | IOL = 4 mA | 5 |
| Resolution (selectable) | 9 | 12 | Bits | Selectable | 5 | ||
| Conversion time | 40 | 75 | ms | 9 bits | 5 | ||
| Conversion time | 80 | 150 | ms | 10 bits | 5 | ||
| Conversion time | 160 | 300 | ms | 11 bits | 5 | ||
| Conversion time | 320 | 600 | ms | 12 bits | 5 | ||
| Operating range | 2.7 | 5.5 | V | 5 | |||
| Quiescent current | IQ | 45 | 75 | µA | Serial bus inactive | 5 | |
| Quiescent current | IQ | 70 | µA | Serial bus active, SCL frequency = 400 kHz | 5 | ||
| Quiescent current | IQ | 150 | µA | Serial bus active, SCL frequency = 3.4 MHz | 5 | ||
| Shutdown current | ISD | 0.1 | 13 | µA | Serial bus inactive | 5 | |
| Shutdown current | ISD | 20 | µA | Serial bus active, SCL frequency = 400 kHz | 5 | ||
| Shutdown current | ISD | 100 | µA | Serial bus active, SCL frequency = 3.4 MHz | 5 | ||
| Specified temperature range | -55 | 125 | °C | 5 | |||
| Storage range | -60 | 150 | °C | 5 | |||
| Input capacitance | 3 | pF | 5 | ||||
| Bus free time between STOP and START | t(BUF) | 1300 | ns | Fast mode | 6 | ||
| Bus free time between STOP and START | t(BUF) | 160 | ns | High-speed mode | 6 | ||
| Repeated START condition setup time | t(SUSTA) | 600 | ns | Fast mode | 6 | ||
| Repeated START condition setup time | t(SUSTA) | 160 | ns | High-speed mode | 6 | ||
| STOP condition setup time | t(SUSTO) | 600 | ns | Fast mode | 6 | ||
| STOP condition setup time | t(SUSTO) | 160 | ns | High-speed mode | 6 | ||
| Data hold time | t(HDDAT) | 20 | 900 | ns | Fast mode | 6 | |
| Data hold time | t(HDDAT) | 20 | 170 | ns | High-speed mode | 6 | |
| Data setup time | t(SUDAT) | 100 | ns | Fast mode | 6 | ||
| Data setup time | t(SUDAT) | 20 | ns | High-speed mode | 6 | ||
| SCL clock LOW period | t(LOW) | 1300 | ns | Fast mode | 6 | ||
| SCL clock LOW period | t(LOW) | 360 | ns | High-speed mode | 6 | ||
| SCL clock HIGH period | t(HIGH) | 600 | ns | Fast mode | 6 | ||
| SCL clock HIGH period | t(HIGH) | 60 | ns | High-speed mode | 6 | ||
| Clock rise and fall time | tRC, tFC | 300 | ns | Fast mode | 6 | ||
| Clock rise and fall time | tRC, tFC | 40 | ns | High-speed mode | 6 | ||
| Data rise and fall time | tRD, tFD | 300 | ns | Fast mode | 6 | ||
| Data rise and fall time | tRD, tFD | 170 | ns | High-speed mode | 6 |
CAD (KiCad official)
- Symbol:
TMP101NA - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
tmp101na-etched.step/tmp101na-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tmp101na.step/tmp101na.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (31 pp, sha256
4099b7e562d93331, retrieved 2026-10-23, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).