component
TMI8260SP-MS
Public Made by Adomby adom
MSKSEMI Brushed DC Motor Drivers, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTMI8260SP-MS
MSKSEMI · Brushed DC Motor Drivers · SOP-8
TMI8260SP-MS from MSKSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BI | input | Reverse-direction logic input that, with FI, selects forward, reverse, brake or stop; high level is 2.2 V minimum and low level is 0.7 V maximum, and it should be left floating when unused and held low or high-Z until 3 ms after VCC power-up. |
| 2 | FI | input | Forward-direction logic input that, with BI, selects forward, reverse, brake or stop; high level is 2.2 V minimum and low level is 0.7 V maximum, and it should be left floating when unused and held low or high-Z until 3 ms after VCC power-up. |
| 3 | GND | power_in | Ground reference for the device; all voltages are referenced to this terminal. |
| 4 | VCC | power_in | Motor and logic supply input with an operating range of 3.0 V to 18 V (absolute maximum 20 V), to be decoupled close to the pin with capacitors such as 0.1 uF and 470 uF. |
| 5 | FO | output | Forward motor output, connected internally with pin 6 and driving the H-bridge output; it is high in forward mode, low in brake and reverse modes, and open in stop mode, with a recommended continuous output current of up to 5.0 A. |
| 6 | FO | output | Forward motor output, connected internally with pin 5 and driving the H-bridge output; it is high in forward mode, low in brake and reverse modes, and open in stop mode, with a recommended continuous output current of up to 5.0 A. |
| 7 | BO | output | Reverse motor output, connected internally with pin 8 and driving the H-bridge output; it is high in reverse mode, low in brake and forward modes, and open in stop mode, with a recommended continuous output current of up to 5.0 A. |
| 8 | BO | output | Reverse motor output, connected internally with pin 7 and driving the H-bridge output; it is high in reverse mode, low in brake and forward modes, and open in stop mode, with a recommended continuous output current of up to 5.0 A. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MSKSEMI |
| Package | SOP-8 |
| Category | Motor Driver ICs |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
TMI8260SP-MS - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
tmi8260sp-ms-etched.step/tmi8260sp-ms-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tmi8260sp-ms.step/tmi8260sp-ms.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MSKSEMI datasheet (9 pp, sha256
05c7c1140f4bf46e, retrieved 2026-10-10, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).