Generated by kicad-footprint-generator · KiCad file format 20260206
TMI7608S
TMI · Power Over Ethernet (PoE) Controllers · QFN-56(8x8)
TMI7608S from TMI, in a QFN-56(8x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection. |
| 2 | VSS0 | power_in | Analog ground for the port 0 section; connect to AGND. |
| 3 | VPORT_NEG0 | power_in | PortN0 negative feeding voltage input. |
| 4 | NC | unconnected | No internal connection. |
| 5 | VPORT_NEG1 | power_in | PortN1 negative feeding voltage input. |
| 6 | VSS1 | power_in | Analog ground for the port 1 section; connect to AGND. |
| 7 | NC | unconnected | No internal connection. |
| 8 | NC | unconnected | No internal connection. |
| 9 | NC | unconnected | No internal connection. |
| 10 | VPORT_NEG2 | power_in | PortN2 negative feeding voltage input. |
| 11 | NC | unconnected | No internal connection. |
| 12 | VPORT_NEG3 | power_in | PortN3 negative feeding voltage input. |
| 13 | VSS2 | power_in | Analog ground for the port 2 section; connect to AGND. |
| 14 | SCAN_MODE | input | Internally pulled down to AGND; must be connected to AGND for normal operation. |
| 15 | ALT_A/B | input | Latched at power-on reset to select ALT_A/B type (0: ALT_A, default; 1: ALT_B); internally pulled down to DGND. |
| 16 | EN_CL4+ | input | Class4+ enable input referenced to DGND, internally pulled down; connect to V3P3 to enable Class4+ classification and leave unconnected for IEEE 802.3at-compliant mode, latched after power-up or reset. |
| 17 | V54 | power_in | Main chip power supply input; a 1 uF capacitor should be added between V54 and AGND. |
| 18 | NC | unconnected | No internal connection. |
| 19 | NC | unconnected | No internal connection. |
| 20 | PMAX | passive | Maximum loading power setting pin; a 75 kOhm resistor to AGND sets total power capability on all 8 ports (Pmax = Rmax x 78 uA x V54), latched at power-up or reset. |
| 21 | AGND | power_in | Analog ground. |
| 22 | AVDD33 | power_out | Analog 3.3V power; with EnB_Reg tied to AGND the built-in regulator is active and can supply 3.3V (6mA) to external devices, while with EnB_Reg tied to 3.3V an external 3.3V (6mA minimum) must be applied, with a 4.7 uF capacitor to AGND. |
| 23 | 2-EVENT | input | Referenced to AGND and internally pulled up to the digital supply; leave unconnected to enable 2-Event classification, force low to disable it. |
| 24 | IC eFuse power | unconnected | Internally connected; leave unconnected. |
| 25 | EnB_Reg | input | Enables or disables the internal 3.3V regulator (see AVDD33); internally pulled up to AVDD33. |
| 26 | NC | unconnected | No internal connection. |
| 27 | LED_DAT | output | Serial LED data output, internally pulled up to DVDD33. |
| 28 | LED_CLK | output | Serial LED clock output. |
| 29 | 24V_EN | input | Latched at power-on reset to set 24V operation (0: disable, default; 1: enable); internally pulled down to DGND. |
| 30 | VSS3 | power_in | Analog ground for the port 3 section; connect to AGND. |
| 31 | VPORT_NEG4 | power_in | PortN4 negative feeding voltage input. |
| 32 | NC | unconnected | No internal connection. |
| 33 | VPORT_NEG5 | power_in | PortN5 negative feeding voltage input. |
| 34 | NC | unconnected | No internal connection. |
| 35 | NC | unconnected | No internal connection. |
| 36 | NC | unconnected | No internal connection. |
| 37 | VSS4 | power_in | Analog ground for the port 4 section; connect to AGND. |
| 38 | VPORT_NEG6 | power_in | PortN6 negative feeding voltage input. |
| 39 | NC | unconnected | No internal connection. |
| 40 | VPORT_NEG7 | power_in | PortN7 negative feeding voltage input. |
| 41 | VSS5 | power_in | Analog ground for the port 5 section; connect to AGND. |
| 42 | NC | unconnected | No internal connection. |
| 43 | DVDD33 | power_out | Digital 3.3V power, internally connected to AVDD33. |
| 44 | nRESET | input | Active-low reset input for the TMI7608S. |
| 45 | nINT | output | Active-low interrupt output. |
| 46 | DGND | power_in | Digital ground; connect to AGND. |
| 47 | NC | unconnected | No internal connection. |
| 48 | ADDR2 | input | I2C device address bit AD2. |
| 49 | ADDR1 | input | I2C device address bit AD1. |
| 50 | ADDR0 | input | I2C device address bit AD0. |
| 51 | NC | unconnected | No internal connection. |
| 52 | SCKO/EE_SCK | output | I2C clock output (shared with EEPROM clock). |
| 53 | SCKI | input | I2C serial clock input. |
| 54 | SDAI | input | I2C serial data line associated with SDAIO; the datasheet describes it as serial data output, see review notes. |
| 55 | SDAIO/EE_DAT | bidirectional | I2C serial data input and output (shared with EEPROM data). |
| 56 | NC | unconnected | No internal connection. |
| 57 | EPAD | power_in | Exposed pad; it should be connected to AGND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TMI |
| Package | QFN-56(8x8) |
| Category | Power Management (PMIC) |
| Pins | 57 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | -0.3 | 90 | V | V54-AGND | 7 | ||
| PortN0~PortN3 PortNn, AGND | -0.3 | 90 | V | n=0~7 | 7 | ||
| All other Pins | -0.3 | 6 | V | All other Pin, (AGND, or DGND) | 7 | ||
| DGND | -0.3 | 0.3 | V | DGND, AGND | 7 | ||
| Maximum Junction Temperature | 150 | °C | 7 | ||||
| Storage Temperature Range | -65 | 150 | °C | 7 | |||
| Lead Temperature | 260 | °C | 30s, reflow | 7 | |||
| Operating Ambient Temperature | TA | -40 | 85 | °C | 7 | ||
| ESD Human Body Model (HBM) | VESD_HBM | -2000 | 2000 | V | ANSI/ESDA/JEDEC JS-001-2017, Class 2 | 7 | |
| ESD Charged Device Mode (CDM) | VESD_CDM | -1000 | 1000 | V | ANSI/ESDA/JEDEC JS-002-2018, Class C3 | 7 | |
| Latch-up | ILATCH-UP | -200 | 200 | mA | JEDEC STANDARD NO.78E, Temperature Classification Class I | 7 | |
| V54 Power Supply voltage | V54 | 32 | 60 | V | 45V~57V @IEEE802.3af | 8 | |
| V54 Power Supply voltage | V54 | 50 | 60 | V | 51V~57V @IEEE802.3at | 8 | |
| AVDD33 voltage | V3P3 | 3 | 3.3 | 3.6 | V | IV3P3=0~10mA | 8 |
| Overcurrent Threshold after Startup | ICUT | 350 | 375 | 400 | mA | Class0 | 8 |
| Overcurrent Threshold after Startup | ICUT | 91 | 112 | 133 | mA | Class1 | 8 |
| Overcurrent Threshold after Startup | ICUT | 160 | 206 | 252 | mA | Class2 | 8 |
| Overcurrent Threshold after Startup | ICUT | 600 | 640 | 680 | mA | Class4 | 8 |
| Overcurrent Threshold after Startup | ICUT | 1200 | 1280 | 1360 | mA | Class4+ | 8 |
| Internal Input Pullup/Pulldown Resistor | RDIN | 25 | 50 | 75 | kΩ | Pullup (pulldown) resistor to V3P3 (DGND) to set default level | 11 |
| Idle Pullup Resistance at PortN_ | RDIS | 0.7 | 1 | 1.25 | MΩ | Detection and classification off, port shut down | 9 |
| PGOOD High Threshold | PGTH | 1.5 | 2 | 2.5 | V | VPortN_ - AGND, PortN_ decreasing | 9 |
| Minimum Iport allowed before disconnect (DC Disconnect Threshold) | IMPSTH | 5 | 7.5 | 10 | mA | Minimum Iport allowed before disconnect (DC disconnect active), VPortN_ = 0V | 9 |
| Load Disconnect Time | tDISC | 300 | 350 | 400 | ms | Time from VRS_ < VDCTH to gate shutdown | 9 |
| Detection Probe Voltage (First Phase) | VDPH1 | 3.8 | 4 | 4.2 | V | V54 - VDET during the first detection phase | 10 |
| Detection Probe Voltage (Second Phase) | VDPH2 | 8.6 | 9 | 9.4 | V | V54 - VDET during the second detection phase | 10 |
| Resistor Detection Window | RDOK | 19 | 26.5 | kΩ | Note 5 | 10 | |
| Mark Event Current Limit | IMARK_LIM | 34 | 40 | 46 | mA | VDET = V54, during mark event measure current through DET | 10 |
| Mark Event Timing | tMARK_E | 7 | 9 | 11 | ms | 10 | |
| Classification Event Timing | tCL_E | 14 | 18 | 22 | ms | 10 | |
| Current-Limit Protection (Classification) | ICL_LIM | 60 | 70 | 80 | mA | VPortN_ = V54, current measured through PortN | 10 |
| Classification Current Threshold | ICL | 5 | 6.5 | 8 | mA | Classification current thresholds between classes Class 0,Class 1 | 10 |
| Classification Current Threshold | ICL | 13 | 14.5 | 16 | mA | Class 1,Class 2 | 10 |
| Classification Current Threshold | ICL | 21 | 23 | 25 | mA | Class 2,Class 3 | 10 |
| Classification Current Threshold | ICL | 31 | 33 | 35 | mA | Class 3,Class 4 | 10 |
| Classification Current Threshold | ICL | 45 | 48 | 51 | mA | Class 4 upper limit (Note 6) | 10 |
| Startup Time | tSTART | 50 | 60 | 70 | ms | Time during which a current limit set by VSU_LIM is allowed, starts when the GATE_ is turned on | 11 |
| Fault Time | tFAULT | 50 | 60 | 70 | ms | Time allowed for an overcurrent fault set by VFLT_LIM after startup | 11 |
| Current Limit Time | tLIM | 50 | 60 | 70 | ms | Current Limit Time during after startup (Note 7) | 11 |
| Restart Timer | tRESTART | 1.6 | 2 | 2.4 | s | ALT_A/B disabled | 11 |
| Gain error voltage | -2.5 | 2.5 | % | TA = -40°C to +85°C | 12 | ||
| V54 Voltage Accuracy | -2.5 | 2.5 | % | V54-AGND=48V TA = -40°C to +85°C | 12 |
CAD (KiCad official)
- Symbol:
TMI7608S - Footprint:
Package_DFN_QFN:QFN-56-1EP_8x8mm_P0.5mm_EP4.5x5.2mm - 3D model: QFN-56(8x8), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tmi7608s-etched.step/tmi7608s-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tmi7608s.step/tmi7608s.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TMI datasheet (30 pp, sha256
56c297fbcc0a39c4, retrieved 2026-11-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).