TMI6050-28

{
  "slug": "tmi6050-28",
  "version": "0.1.0",
  "type": "component",
  "description": "TMI Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "tmi6050-28",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tmi6050-28.kicad_sym",
    "tmi6050-28.kicad_mod",
    "tmi6050-28.glb",
    "tmi6050-28.step",
    "tmi6050-28.lbr",
    "docs/hero.png",
    "docs/tmi6050-28-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tmi6050-28-hero.glb",
    "tmi6050-28-hero.overlay.json",
    "tmi6050-28-etched.glb"
  ],
  "component": {
    "mpn": "TMI6050-28",
    "manufacturer": "TMI",
    "package": "SOT-23-5",
    "pin_count": 5,
    "category": "Power Management (PMIC)",
    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588941383248064512",
    "parts": {
      "symbol": "tmi6050-28.kicad_sym",
      "footprint": "tmi6050-28.kicad_mod",
      "model_3d": "tmi6050-28-hero.glb",
      "model_3d_plain": "tmi6050-28-etched.glb",
      "model_3d_step": "tmi6050-28-etched.step",
      "model_3d_step_plain": "tmi6050-28.step",
      "lbr": "tmi6050-28.lbr"
    },
    "distributor_links": {
      "lcsc": "C1509109"
    },
    "distributor_check": {
      "checked_at": "2026-10-17T14:34:01Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply of the LDO, with a recommended operating range of 2.5V to 5.5V (absolute maximum -0.3 to 6V); a 1μF or larger ceramic input capacitor is required between VIN and GND."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Signal ground of the regulator."
      },
      {
        "number": "3",
        "name": "EN",
        "type": "input",
        "description": "Enable pin: connect to ground or below 0.4V to disable the device, connect to 1.05V or above to enable it; this pin must not be left floating."
      },
      {
        "number": "4",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected on the fixed-output version (the adjustable version uses this pin as FB)."
      },
      {
        "number": "5",
        "name": "VOUT",
        "type": "power_out",
        "description": "Output of the LDO regulator, which requires a 1μF ceramic output capacitor for stability over the full 0mA to 600mA load range."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pinout taken from the TMI6050 (non-B) SOT23-5 table, fixed-output column, which applies to MPN TMI60; The datasheet pin-function table lists pin 4 as 'NC/FB' with NC for the fixed-output version; the fi; The datasheet gives 0.4V (disable) and 1.05V (enable) for EN in the text, while the electrical table"
        ],
        "pages_sent": 12,
        "cost_usd": 0.0509,
        "at": "2026-10-17T14:31:50"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588941383248064512",
        "pages": 12,
        "sha256": "27c3f99ed549b2f6",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 5,
        "described": 5,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tmi6050-28.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "720a6eab0024069bbee68e7cb4c3ff1149468a34611225cdc852662c5d0ec2b7",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tmi6050-28-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "5b638e5e45d470053da76822550caf32cb12d49879531d517c0fd492828f7cc0",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}