component
TMI33431E
Public Made by Adomby adom
TMI DC-DC Converters, ESOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTMI33431E
TMI · DC-DC Converters · ESOP-8
TMI33431E from TMI, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BS | passive | High-side gate driver bootstrap pin. Provides supply to the high-side LDMOS gate driver; charged to VSW+5V when the low-side switch is on. Connect a 100nF ceramic capacitor between BS and SW. |
| 2 | IN | power_in | Power input pin. Recommended operating range 4.5V to 30V; absolute maximum 36V. Bypass with local ceramic decoupling to GND. |
| 3 | EN | input | Enable input with an internal 5V Zener clamp. Drive to logic high (rising threshold ~1.15V) to enable the converter; drive low to enter micro-power shutdown. Must not be left floating; if pulled up to VIN via a resistor, keep EN sink current below 1mA. |
| 4 | SS | passive | Soft-start and tracking pin. An external capacitor to GND, charged by an internal 2.6µA current source, sets the internal 0.8V reference rise time (tSS = CSS·VREF/ISS). The SS pin voltage overrides the internal reference during startup. |
| 5 | FB | input | Feedback pin for the error amplifier. Connect to the mid-point of an external R1/R2 divider from VOUT to GND; the loop regulates FB to the internal 0.8V reference (VFBTH typ 800mV, ±2%). FB pin bias current is ±50nA max. |
| 6 | COMP | output | External loop compensation node; error-amplifier output. Connect an R-C network to GND to set the control-loop bandwidth and phase margin for peak current-mode operation. |
| 7 | GND | power_in | Ground reference and return for the controller. Tie to the exposed thermal pad and the system power ground plane. |
| 8 | SW | power_out | Switch node; common source of the internal high-side and low-side power MOSFETs. Connect to the external power inductor. Absolute-max range −0.3V to 36V (−5V to 38V for <10ns transients). |
| EP | EP | power_in | Exposed thermal pad, internally connected to Power GND. Solder to a large PCB ground copper area for thermal dissipation and low-impedance power return. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TMI |
| Package | ESOP-8 |
| Category | PMIC |
| Pins | 9 |
Ordering variants
Same part, different packaging or reel option.
TMI33431E
CAD (KiCad official)
- Symbol:
TMI33431E - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm - 3D model: ESOP-8 (KiCad packages3D, STEP)
- 3D model files:
tmi33431e-etched.step/tmi33431e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tmi33431e.step/tmi33431e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TMI datasheet (15 pp, sha256
a7aa4912dfad3f7f, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).