component
TMI33431
Public Made by Adomby adom
TMI DC-DC Converters, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 2d ago |
| viewers | 2d ago |
| package.json | 2d ago |
| page.json | 2d ago |
| README.md | 2d ago |
| tmi33431-etched.glb | 2d ago |
| tmi33431-etched.step | 2d ago |
| tmi33431-hero.glb | 2d ago |
| tmi33431-hero.overlay.json | 2d ago |
| tmi33431.glb | 2d ago |
| tmi33431.kicad_mod | 2d ago |
| tmi33431.kicad_sym | 2d ago |
| tmi33431.lbr | 2d ago |
| tmi33431.step | 2d ago |
| verification.json | 2d ago |
TMI33431
TMI · DC-DC Converters · SOP-8
TMI33431 from TMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BS | power_in | High-side gate driver bootstrap pin that supplies the high-side LDMOS gate driver; connect a 100nF capacitor between BS and SW. |
| 2 | IN | power_in | Power input pin; the recommended input voltage range is 4.5V to 30V and the input OVP threshold is typically 32V. |
| 3 | EN | input | Logic-high enables the IC and logic-low puts it into micro-power shutdown; EN must not be left floating and the EN sink current must stay below 1mA when pulled up through a resistor. |
| 4 | SS | passive | Soft-start and tracking pin where an external capacitor sets the internal reference rise time, and the voltage on this pin overrides the internal 0.8V reference. |
| 5 | FB | input | Feedback pin regulated to the 0.8V reference, with a PWM-operation feedback threshold of 784mV to 816mV. |
| 6 | COMP | passive | External compensation pin for the error amplifier output in peak current mode control. |
| 7 | GND | power_in | Ground pin. |
| 8 | SW | output | Switch pin connected to the external inductor; the absolute maximum rating for SW is -0.3V to 33V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TMI |
| Package | SOP-8 |
| Category | Power Management ICs |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Supply Voltage, SW | -0.3 | 33 | V | 2 | |||
| BS to SW Voltage | -0.3 | 6 | V | 2 | |||
| All Other Pins (FB, EN, SS, COMP) Voltage | -0.3 | 6 | V | 2 | |||
| Storage Temperature Range | -50 | 150 | °C | 2 | |||
| Junction Temperature | -40 | 150 | °C | Note 2 | 2 | ||
| Package Dissipation | 1.5 | W | 2 | ||||
| ESD Human Body Model (all pins) | VESD_HBM | -2000 | 2000 | V | JEDEC specification JS-001 | 3 | |
| Voltage Range | VIN | 4.5 | 30 | V | 3 | ||
| Junction-to-ambient thermal resistance | θJA | 98 | °C/W | Note 3 | 3 | ||
| Junction-to-case(top) thermal resistance (TSOT23-6) | θJC | 45 | °C/W | TSOT23-6 as printed | 3 | ||
| Junction-to-case(top) characterization parameter (TSOT23-6) | ψJT | 13 | °C/W | TSOT23-6 as printed | 3 | ||
| Input Voltage Range | VIN | 4.5 | 30 | V | 4 | ||
| Under Voltage Lockout | VUVLO | 4.3 | V | VIN rising | 4 | ||
| UVLO Hysteresis | VUVLO_HY | 0.35 | V | 4 | |||
| Input OVP Voltage | VINOVP | 32 | V | 4 | |||
| Input Quiescent Current | IQ | 0.45 | 0.52 | mA | VFB=1V | 4 | |
| Input Supply Current | IIN | 0.5 | mA | No load | 4 | ||
| Shutdown Current | ISD | 3 | 10 | μA | EN = 0V | 4 | |
| Feedback Threshold Voltage | VFBTH | 784 | 800 | 816 | mV | PWM operation | 4 |
| FB Pin input current | IFB | -50 | 50 | nA | 4 | ||
| EN Rising Threshold | 1 | 1.15 | 1.3 | V | 4 | ||
| EN Hysteresis | 100 | mV | 4 | ||||
| EN sink current | IEN_Sink | 1 | mA | 4 | |||
| Soft start Time | TSS | 1.2 | ms | CSS=NC | 4 | ||
| Soft start Time | TSS | 3.5 | ms | CSS=10nF | 4 | ||
| Current limit cycle-by-cycle | ILIM_MAX | 4.2 | A | 4 | |||
| SW leakage | ISW_LEAK | 10 | μA | 4 | |||
| Switch On-Resistance (high side) | RDSONH | 120 | mΩ | 4 | |||
| Switch On-Resistance (low side) | RDSONL | 80 | mΩ | 4 | |||
| Switching Frequency | FSW | 570 | kHz | 4 | |||
| Minimum Turn-on Time | TON_MIN | 200 | ns | Note 3 | 4 | ||
| Hiccup on Time | 2 | ms | Note 3 | 4 | |||
| Hiccup Time Before Restart | 64 | ms | 4 | ||||
| Maximum Duty-cycle | DMAX | 92 | % | 4 | |||
| Thermal Shutdown Threshold | TSDN | 160 | °C | Note 3 | 4 | ||
| Thermal Shutdown Hysteresis | TSDN_HY | 10 | °C | Note 3 | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | 3) Return FB, COMP and SS/RT to signal GND pin, and connect the signal GND to power GND at a single point for best noise immunity. Connect exposed pad to power ground copper area with copper and vias. | 9 |
CAD (KiCad official)
- Symbol:
TMI33431 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
tmi33431-etched.step/tmi33431-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tmi33431.step/tmi33431.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TMI datasheet (15 pp, sha256
14fd38cd02c68a13, retrieved 2026-11-05, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).