component
TMI31601F
Public Made by Adomby adom
TMI DC-DC Converters, DFN-6(1.6x1.6). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTMI31601F
TMI · DC-DC Converters · DFN-6(1.6x1.6)
TMI31601F from TMI, in a DFN-6(1.6x1.6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FB | input | Output voltage feedback pin connected to feedback divider resistor with 600mV nominal regulation voltage. |
| 2 | GND | power_in | Ground reference pin. |
| 3 | VIN | power_in | Power supply input pin, 2.5V to 5.5V operating range, requires 4.7µF minimum ceramic input capacitor. |
| 4 | LX | output | Power switch output node connected to inductor with 1.5A peak current limit. |
| 5 | EN | input | Chip enable control pin, drive above 1.5V to enable and below 0.3V to disable, do not leave floating. |
| 6 | NC | unconnected | No internal connection. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TMI |
| Package | DFN-6(1.6x1.6) |
| Category | Power Management (PMIC) |
| Pins | 6 |
CAD (KiCad official)
- Symbol:
TMI31601F - Footprint:
OptoDevice:Renesas_DFN-6_1.5x1.6mm_P0.5mm - 3D model: DFN-6(1.6x1.6), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.55 mm nominal QFN height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
tmi31601f-etched.step/tmi31601f-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tmi31601f.step/tmi31601f.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TMI datasheet (12 pp, sha256
23d075f5a18fb6e1, retrieved 2026-10-01, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).