main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers tmi3113h2: viewers rendered from the public page · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
tmi3113h2-etched.glb tmi3113h2: factory component page (tier=lcsc) · Ray
tmi3113h2-etched.step tmi3113h2: factory component page (tier=lcsc) · Ray
tmi3113h2-hero.glb tmi3113h2: hero GLB from the etched model (keeps the MPN mark) · Ray
tmi3113h2-hero.overlay.json tmi3113h2: hero GLB from the etched model (keeps the MPN mark) · Ray
tmi3113h2.glb Publish 0.1.0 · Ray
tmi3113h2.kicad_mod Publish 0.1.0 · Ray
tmi3113h2.kicad_sym Publish 0.1.0 · Ray
tmi3113h2.lbr Publish 0.1.0 · Ray
tmi3113h2.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 6 pins · Ray

TMI3113H2

TMI · DC-DC Converters · SOT-23-6

TMI3113H2 from TMI, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN input Enable pin: drive EN above 1.5V to turn the part on and below 0.4V to turn it off, and do not leave it floating.
2 GND power_in Ground pin.
3 LX output Power switch output, the switch node connecting the internal P-ch and N-ch MOSFET drains to the inductor.
4 IN power_in Analog supply input, with a recommended operating voltage range of 2.7V to 5.5V.
5 PG output Power good open-drain output that goes high impedance when the output is above 91% of regulated nominal voltage, with a sink current of 2 mA.
6 FB input Output voltage feedback pin, connected to an internal resistive divider compared against the 0.6V internal reference voltage.

Key specifications

Parameter Value
Manufacturer TMI
Package SOT-23-6
Category Power Supply Chip
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Supply Voltage -0.3 7 V 2
LX Voltages -0.3 7 V 2
LX Voltages (<10ns transient) -2.5 7.5 V <10ns transient 2
LX Voltages (<5ns transient) -3.5 8.5 V <5ns transient 2
EN, FB, PG Voltage -0.3 7 V 2
Storage Temperature Range -65 150 °C 2
Junction Temperature 160 °C Note 2 2
Power Dissipation (SOT23-6) 1 W 2
Lead Temperature (Soldering, 10s) 260 °C Soldering, 10s 2
Voltage Range IN 2.7 5.5 V 3
TJ Operating Junction Temperature Range TJ -40 125 °C 3
TA Operating Ambient Temperature Range TA -40 85 °C 3
Input Voltage Range 2.7 5.5 V VIN=VEN=3.6V, VOUT=1.8V, TA = 25°C, unless otherwise noted (table note) 4
Shutdown Current 0.1 1 µA VEN = 0V (table note applies) 4
Regulated Feedback Voltage VFB VFB 0.588 0.6 0.612 V PWM operation, TA = 25°C 4
EN Leakage Current -1 0.01 1 µA (table note applies) 4
LX Leakage Current -1 0.01 1 µA VEN = 0V, VIN = VLX = 5V 4
Quiescent Current 50 85 µA VEN =2.0V, IOUT=0A, VFB=VREF x 105% 4
Input OVP Threshold 6.1 V VIN Rising 4
Input UVLO Threshold 2.5 V VIN Rising 4
Input UVLO Hysteresis 0.5 V 4
Regulated Feedback Voltage VFB (PFM) VFB 0.609 V PFM operation, No Load, TA = 25°C 4
Oscillation Frequency (VOUT=1.8V) 1.5 MHz VOUT=1.8V 4
Oscillation Frequency (VOUT=0V) 475 kHz VOUT=0V 4
On Resistance of PMOS 95 mΩ ILX=100mA 4
On Resistance of NMOS 50 mΩ ILX=-100mA 4
Peak Current Limit 4 A VIN= 5V, VFB=90%*VREF 4
EN High Level Input Voltage 1.5 V 4
EN Low Level Input Voltage 0.4 V 4
Power Good Threshold 91 % VFB Reference to VREF voltage 4
Power Good Sink Current 2 mA 4
Thermal Shutdown Threshold 155 °C Note 3 4
Thermal Shutdown Hysteresis 20 °C Note 3 4
Junction-to-ambient thermal resistance of SOT23-6 θJA 130 °C/W Value column (single value, not min/max) 3
Junction-to-case(top) thermal resistance of SOT23-6 θJC 56 °C/W Value column (single value, not min/max) 3

CAD (KiCad official)

  • Symbol: TMI3113H2
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.05 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tmi3113h2-etched.step / tmi3113h2-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tmi3113h2.step / tmi3113h2.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TMI datasheet (18 pp, sha256 4671094b33abf2a7, retrieved 2026-11-12, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF