TMG0365

{
  "slug": "tmg0365",
  "version": "0.1.0",
  "type": "component",
  "description": "TM Shenzhen Titan Micro Elec AC-DC Controllers And Regulators, DIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "tmg0365",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tmg0365.kicad_sym",
    "tmg0365.kicad_mod",
    "tmg0365.glb",
    "tmg0365.step",
    "tmg0365.lbr",
    "docs/hero.png",
    "docs/tmg0365-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tmg0365-hero.glb",
    "tmg0365-hero.overlay.json",
    "tmg0365-etched.glb"
  ],
  "component": {
    "mpn": "TMG0365",
    "manufacturer": "TM Shenzhen Titan Micro Elec",
    "package": "DIP-8",
    "pin_count": 8,
    "category": "Power Management (PMIC)",
    "subcategory": "AC-DC Controllers And Regulators",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590440926306349056",
    "parts": {
      "symbol": "tmg0365.kicad_sym",
      "footprint": "tmg0365.kicad_mod",
      "model_3d": "tmg0365-hero.glb",
      "model_3d_plain": "tmg0365-etched.glb",
      "model_3d_step": "tmg0365-etched.step",
      "model_3d_step_plain": "tmg0365.step",
      "lbr": "tmg0365.lbr"
    },
    "distributor_links": {
      "lcsc": "C5174552"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T23:36:22Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "FB",
        "type": "input",
        "description": "Voltage feedback pin connected to the external optocoupler, with input impedance 6.0 kΩ, open-circuit voltage 4.2-5.2 V, overload threshold 3.7 V held for 50 ms before shutdown, and burst-mode entry at 1.4 V."
      },
      {
        "number": "2",
        "name": "VDD",
        "type": "power_in",
        "description": "Supply input with start-up voltage 14.5-16.5 V, shutdown voltage 8.5-10.5 V, overvoltage protection at 23-24 V, clamp at 25-27 V (5 mA), and an absolute maximum of 30 V."
      },
      {
        "number": "3",
        "name": "NC",
        "type": "unconnected",
        "description": "No-connect pin, left empty to maintain safe clearance between high and low voltage."
      },
      {
        "number": "4",
        "name": "DRAIN",
        "type": "passive",
        "description": "Drain of the integrated power MOSFET, with a breakdown voltage of at least 650 V (BVDSS, VGS=0 V, ID=250 µA)."
      },
      {
        "number": "5",
        "name": "DRAIN",
        "type": "passive",
        "description": "Drain of the integrated power MOSFET, bonded together with pin 4 and rated at 650 V minimum breakdown voltage."
      },
      {
        "number": "6",
        "name": "NC",
        "type": "unconnected",
        "description": "No-connect pin, left empty to maintain safe clearance between high and low voltage."
      },
      {
        "number": "7",
        "name": "CS",
        "type": "input",
        "description": "Current-sense pin connected to the power MOSFET source through an external sense resistor, with input impedance 5.0 kΩ, peak current limit 1.0-1.1 V, valley limit 0.7-0.8 V, and absolute input range −0.3 to 5.0 V."
      },
      {
        "number": "8",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin for the controller and system reference."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The pin descriptions combine the pin-function table on page 2 with electrical limits taken from the ; The DIP8 pin diagram text extracted from page 2 is jumbled. Pin numbers were taken from the pin-func; The datasheet defines pins 3 and 6 as empty (NC) for creepage spacing. The sheet does not describe t"
        ],
        "pages_sent": 10,
        "cost_usd": 0.0413,
        "at": "2026-10-18T23:34:19"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590440926306349056",
        "pages": 10,
        "sha256": "71da655d9d6762bd",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tmg0365.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          9.27,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "4a377a56a8d9e9c0b86c095ef9ecc1869ac19e7f5069a3247b294250bf4f235d",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tmg0365-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          9.27,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "944d1fbdd26d837a68a2ac305dc42a527965bd23b7f5805d42197e9c2c20cb9b",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}