component
TMDS442PNPR
Public Made by Adomby adom
Texas Instruments Interface - Specialized, LQFP-128(14x14). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
Publish 0.1.0
12 files changed
+26181
diff truncated
README.mdadded+164@@ -0,0 +1,164 @@+# TMDS442PNPR++**Texas Instruments** · Interface - Specialized · LQFP-128(14x14)++TMDS442PNPR from Texas Instruments, in a LQFP-128(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | Vcc | power_in | Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal). |+| 2 | HPD1 | output | Source port 1 hot plug detector output, pulled down internally so it stays low until a valid high is received. |+| 3 | 5V_PWR1 | input | Source port 1 5-V power signal input, pulled down internally so it stays low until a valid high is received; absolute maximum 6 V. |+| 4 | SDA1 | bidirectional | Source port 1 DDC I2C data line, buffered by an I2C repeater that isolates bus capacitance; absolute maximum 6 V. |+| 5 | SCL1 | bidirectional | Source port 1 DDC I2C clock line, buffered by an I2C repeater that isolates bus capacitance; absolute maximum 6 V. |+| 6 | GND | power_in | Ground reference for the device. |+| 7 | B11 | input | Source port 1 TMDS negative input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps. |+| 8 | A11 | input | Source port 1 TMDS positive input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps. |+| 9 | Vcc | power_in | Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal). |+| 10 | B12 | input | Source port 1 TMDS negative input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps. |+| 11 | A12 | input | Source port 1 TMDS positive input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps. |+| 12 | GND | power_in | Ground reference for the device. |+| 13 | B13 | input | Source port 1 TMDS negative input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps. |+| 14 | A13 | input | Source port 1 TMDS positive input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps. |+| 15 | Vcc | power_in | Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal). |+| 16 | B14 | input | Source port 1 TMDS negative input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps. |+| 17 | A14 | input | Source port 1 TMDS positive input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps. |+| 18 | GND | power_in | Ground reference for the device. |+| 19 | Vcc | power_in | Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal). |+| 20 | GPIO0 (SA1) | bidirectional | GPIO0, used as SA1, the sink port 1 source selector control. |+| 21 | GPIO1 (SB1) | bidirectional | GPIO1, used as SB1, the sink port 1 source selector control. |+| 22 | GPIO2 (/OE1) | bidirectional | GPIO2, used as /OE1, the sink port 1 TMDS output enable. |+| 23 | GPIO3 (I2CEN1) | bidirectional | GPIO3, used as I2CEN1, the sink port 1 DDC I2C output enable. |+| 24 | GPIO4 (PRE1) | bidirectional | GPIO4, used as PRE1, the sink port 1 TMDS AC de-emphasis mode selector. |+| 25 | GPIO5 (SA2) | bidirectional | GPIO5, used as SA2, the sink port 2 source selector control. |+| 26 | GPIO6 (SB2) | bidirectional | GPIO6, used as SB2, the sink port 2 source selector control. |+| 27 | GPIO7 (/OE2) | bidirectional | GPIO7, used as /OE2, the sink port 2 TMDS output enable. |+| 28 | GPIO8 (I2CEN2) | bidirectional | GPIO8, used as I2CEN2, the sink port 2 DDC I2C output enable. |+| 29 | GPIO9 (PRE2) | bidirectional | GPIO9, used as PRE2, the sink port 2 TMDS AC de-emphasis mode selector. |+| 30 | GPIO10 (SP) | bidirectional | GPIO10, used as SP, the sink priority selector. |+| 31 | GE | input | GPIO enable: low selects the local I2C pins as active with GPIO pins high impedance; high selects GPIO pins as active with local I2C pins high impedance. |+| 32 | OVS | bidirectional | GPIO11, used as OVS, the SCL_SINK/SDA_SINK output voltage select. |+| 33 | GND | power_in | Ground reference for the device. |+| 34 | Y24 | output | Sink port 2 TMDS positive output; high impedance when disabled. |+| 35 | Z24 | output | Sink port 2 TMDS negative output; high impedance when disabled. |+| 36 | Vcc | power_in | Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal). |+| 37 | Y23 | output | Sink port 2 TMDS positive output; high impedance when disabled. |+| 38 | Z23 | output | Sink port 2 TMDS negative output; high impedance when disabled. |+| 39 | GND | power_in | Ground reference for the device. |+| 40 | Y22 | output | Sink port 2 TMDS positive output; high impedance when disabled. |+| 41 | Z22 | output | Sink port 2 TMDS negative output; high impedance when disabled. |+| 42 | Vcc | power_in | Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal). |+| 43 | Y21 | output | Sink port 2 TMDS positive output; high impedance when disabled. |+| 44 | Z21 | output | Sink port 2 TMDS negative output; high impedance when disabled. |+| 45 | GND | power_in | Ground reference for the device. |+| 46 | SCL_SINK2 | bidirectional | Sink port 2 DDC I2C clock line; absolute maximum 6 V. |+| 47 | SDA_SINK2 | bidirectional | Sink port 2 DDC I2C data line; absolute maximum 6 V. |+| 48 | 5V_SINK2 | output | Sink port 2 5-V power indicator output, pulled down internally so it stays low until a valid high is received. |+| 49 | HPD_SINK2 | input | Sink port 2 hot plug detector input; absolute maximum 6 V. |+| 50 | Vcc | power_in | Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal). |+| 51 | VSADJ | input | TMDS compliant voltage swing control; set by an external resistor of 4.6 to 4.68 kΩ. |+| 52 | GND | power_in | Ground reference for the device. |+| 53 | Y14 | output | Sink port 1 TMDS positive output; high impedance when disabled. |+| 54 | Z14 | output | Sink port 1 TMDS negative output; high impedance when disabled. |+| 55 | Vcc | power_in | Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal). |+| 56 | Y13 | output | Sink port 1 TMDS positive output; high impedance when disabled. |+| 57 | Z13 | output | Sink port 1 TMDS negative output; high impedance when disabled. |+| 58 | GND | power_in | Ground reference for the device. |+| 59 | Y12 | output | Sink port 1 TMDS positive output; high impedance when disabled. |+| 60 | Z12 | output | Sink port 1 TMDS negative output; high impedance when disabled. |+| 61 | Vcc | power_in | Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal). |+| 62 | Y11 | output | Sink port 1 TMDS positive output; high impedance when disabled. |+| 63 | Z11 | output | Sink port 1 TMDS negative output; high impedance when disabled. |+| 64 | GND | power_in | Ground reference for the device. |+| 65 | SCL_SINK1 | bidirectional | Sink port 1 DDC I2C clock line; absolute maximum 6 V. |+| 66 | SDA_SINK1 | bidirectional | Sink port 1 DDC I2C data line; absolute maximum 6 V. |+| 67 | 5V_SINK1 | output | Sink port 1 5-V power indicator output, pulled down internally so it stays low until a valid high is received. |+| 68 | HPD_SINK1 | input | Sink port 1 hot plug detector input; absolute maximum 6 V. |+| 69 | Vcc | power_in | Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal). |+| 70 | GND | power_in | Ground reference for the device. |+| 71 | LC_A1 | input | Local I2C address bit 1. |+| 72 | LC_A0 | input | Local I2C address bit 0. |+| 73 | LC_SDA | bidirectional | Local I2C data line; control input LVTTL, absolute maximum 4 V. |+| 74 | LC_SCL | bidirectional | Local I2C clock line; control input LVTTL, absolute maximum 4 V. |+| 75 | Vcc | power_in | Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal). |+| 76 | HPD4 | output | Source port 4 hot plug detector output. |+| 77 | 5V_PWR4 | input | Source port 4 5-V power signal input; absolute maximum 6 V. |+| 78 | SDA4 | bidirectional | Source port 4 DDC I2C data line; absolute maximum 6 V. |+| 79 | SCL4 | bidirectional | Source port 4 DDC I2C clock line; absolute maximum 6 V. |+| 80 | GND | power_in | Ground reference for the device. |+| 81 | B41 | input | Source port 4 TMDS negative input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps. |+| 82 | A41 | input | Source port 4 TMDS positive input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps. |+| 83 | Vcc | power_in | Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal). |+| 84 | B42 | input | Source port 4 TMDS negative input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps. |+| 85 | A42 | input | Source port 4 TMDS positive input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps. |+| 86 | GND | power_in | Ground reference for the device. |+| 87 | B43 | input | Source port 4 TMDS negative input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps. |+| 88 | A43 | input | Source port 4 TMDS positive input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps. |+| 89 | Vcc | power_in | Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal). |+| 90 | B44 | input | Source port 4 TMDS negative input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps. |+| 91 | A44 | input | Source port 4 TMDS positive input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps. |+| 92 | GND | power_in | Ground reference for the device. |+| 93 | Vcc | power_in | Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal). |+| 94 | HPD3 | output | Source port 3 hot plug detector output. |+| 95 | 5V_PWR3 | input | Source port 3 5-V power signal input; absolute maximum 6 V. |+| 96 | SDA3 | bidirectional | Source port 3 DDC I2C data line; absolute maximum 6 V. |+| 97 | SCL3 | bidirectional | Source port 3 DDC I2C clock line; absolute maximum 6 V. |+| 98 | GND | power_in | Ground reference for the device. |+| 99 | B31 | input | Source port 3 TMDS negative input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps. |+| 100 | A31 | input | Source port 3 TMDS positive input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps. |+| 101 | Vcc | power_in | Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal). |+| 102 | B32 | input | Source port 3 TMDS negative input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps. |+| 103 | A32 | input | Source port 3 TMDS positive input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps. |+| 104 | GND | power_in | Ground reference for the device. |+| 105 | B33 | input | Source port 3 TMDS negative input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps. |+| 106 | A33 | input | Source port 3 TMDS positive input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps. |+| 107 | Vcc | power_in | Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal). |+| 108 | B34 | input | Source port 3 TMDS negative input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps. |+| 109 | A34 | input | Source port 3 TMDS positive input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps. |+| 110 | GND | power_in | Ground reference for the device. |+| 111 | Vcc | power_in | Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal). |+| 112 | HPD2 | output | Source port 2 hot plug detector output. |+| 113 | 5V_PWR2 | input | Source port 2 5-V power signal input; absolute maximum 6 V. |+| 114 | SDA2 | bidirectional | Source port 2 DDC I2C data line; absolute maximum 6 V. |+| 115 | SCL2 | bidirectional | Source port 2 DDC I2C clock line; absolute maximum 6 V. |+| 116 | GND | power_in | Ground reference for the device. |+| 117 | B21 | input | Source port 2 TMDS negative input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps. |+| 118 | A21 | input | Source port 2 TMDS positive input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps. |+| 119 | Vcc | power_in | Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal). |+| 120 | B22 | input | Source port 2 TMDS negative input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps. |+| 121 | A22 | input | Source port 2 TMDS positive input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps. |+| 122 | GND | power_in | Ground reference for the device. |+| 123 | B23 | input | Source port 2 TMDS negative input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps. |+| 124 | A23 | input | Source port 2 TMDS positive input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps. |+| 125 | Vcc | power_in | Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal). |+| 126 | B24 | input | Source port 2 TMDS negative input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps. |+| 127 | A24 | input | Source port 2 TMDS positive input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps. |+| 128 | GND | power_in | Ground reference for the device. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | LQFP-128(14x14) |+| Category | Interface |+| Pins | 128 |++## CAD (KiCad official)++- Symbol: `TMDS442PNPR`+- Footprint: `Package_QFP:LQFP-128_14x14mm_P0.4mm`+- 3D model: LQFP-128(14x14) (KiCad packages3D, STEP)+- 3D model files: `tmds442pnpr-etched.step` / `tmds442pnpr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tmds442pnpr.step` / `tmds442pnpr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tmds442) (47 pp, sha256 `fed1b169dc376f19`, retrieved 2026-10-11, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tmds442pnpr-datasheet.pdf)
docs/hero.pngadded⋯ 1 unchanged line ⋯
docs/tmds442pnpr-datasheet.pdfadded⋯ 1 unchanged line ⋯
package.jsonadded+914@@ -0,0 +1,914 @@+{+ "slug": "tmds442pnpr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Interface - Specialized, LQFP-128(14x14). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "interface",+ "tmds442pnpr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tmds442pnpr.kicad_sym",+ "tmds442pnpr.kicad_mod",+ "tmds442pnpr.glb",+ "tmds442pnpr.step",+ "tmds442pnpr.lbr",+ "docs/hero.png",+ "docs/tmds442pnpr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "tmds442pnpr-hero.glb",+ "tmds442pnpr-hero.overlay.json"+ ],+ "component": {+ "mpn": "TMDS442PNPR",+ "manufacturer": "Texas Instruments",+ "package": "LQFP-128(14x14)",+ "pin_count": 128,+ "category": "Interface",+ "subcategory": "Interface - Specialized",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tmds442",+ "parts": {+ "symbol": "tmds442pnpr.kicad_sym",+ "footprint": "tmds442pnpr.kicad_mod",+ "model_3d": "tmds442pnpr-hero.glb",+ "model_3d_plain": "tmds442pnpr.glb",+ "model_3d_step": "tmds442pnpr-etched.step",+ "model_3d_step_plain": "tmds442pnpr.step",+ "lbr": "tmds442pnpr.lbr"+ },+ "distributor_links": {+ "lcsc": "C473346",+ "digikey": "296-21971-2-ND",+ "mouser": "595-TMDS442PNPR"+ },+ "distributor_check": {+ "checked_at": "2026-10-11T01:34:03Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-21971-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-TMDS442PNPR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "Vcc",+ "type": "power_in",+ "description": "Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal)."+ },+ {+ "number": "2",+ "name": "HPD1",+ "type": "output",+ "description": "Source port 1 hot plug detector output, pulled down internally so it stays low until a valid high is received."+ },+ {+ "number": "3",+ "name": "5V_PWR1",+ "type": "input",+ "description": "Source port 1 5-V power signal input, pulled down internally so it stays low until a valid high is received; absolute maximum 6 V."+ },+ {+ "number": "4",+ "name": "SDA1",+ "type": "bidirectional",+ "description": "Source port 1 DDC I2C data line, buffered by an I2C repeater that isolates bus capacitance; absolute maximum 6 V."+ },+ {+ "number": "5",+ "name": "SCL1",+ "type": "bidirectional",+ "description": "Source port 1 DDC I2C clock line, buffered by an I2C repeater that isolates bus capacitance; absolute maximum 6 V."+ },+ {+ "number": "6",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "7",+ "name": "B11",+ "type": "input",+ "description": "Source port 1 TMDS negative input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "8",+ "name": "A11",+ "type": "input",+ "description": "Source port 1 TMDS positive input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "9",+ "name": "Vcc",+ "type": "power_in",+ "description": "Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal)."+ },+ {+ "number": "10",+ "name": "B12",+ "type": "input",+ "description": "Source port 1 TMDS negative input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "11",+ "name": "A12",+ "type": "input",+ "description": "Source port 1 TMDS positive input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "12",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "13",+ "name": "B13",+ "type": "input",+ "description": "Source port 1 TMDS negative input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "14",+ "name": "A13",+ "type": "input",+ "description": "Source port 1 TMDS positive input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "15",+ "name": "Vcc",+ "type": "power_in",+ "description": "Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal)."+ },+ {+ "number": "16",+ "name": "B14",+ "type": "input",+ "description": "Source port 1 TMDS negative input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "17",+ "name": "A14",+ "type": "input",+ "description": "Source port 1 TMDS positive input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "18",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "19",+ "name": "Vcc",+ "type": "power_in",+ "description": "Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal)."+ },+ {+ "number": "20",+ "name": "GPIO0 (SA1)",+ "type": "bidirectional",+ "description": "GPIO0, used as SA1, the sink port 1 source selector control."+ },+ {+ "number": "21",+ "name": "GPIO1 (SB1)",+ "type": "bidirectional",+ "description": "GPIO1, used as SB1, the sink port 1 source selector control."+ },+ {+ "number": "22",+ "name": "GPIO2 (/OE1)",+ "type": "bidirectional",+ "description": "GPIO2, used as /OE1, the sink port 1 TMDS output enable."+ },+ {+ "number": "23",+ "name": "GPIO3 (I2CEN1)",+ "type": "bidirectional",+ "description": "GPIO3, used as I2CEN1, the sink port 1 DDC I2C output enable."+ },+ {+ "number": "24",+ "name": "GPIO4 (PRE1)",+ "type": "bidirectional",+ "description": "GPIO4, used as PRE1, the sink port 1 TMDS AC de-emphasis mode selector."+ },+ {+ "number": "25",+ "name": "GPIO5 (SA2)",+ "type": "bidirectional",+ "description": "GPIO5, used as SA2, the sink port 2 source selector control."+ },+ {+ "number": "26",+ "name": "GPIO6 (SB2)",+ "type": "bidirectional",+ "description": "GPIO6, used as SB2, the sink port 2 source selector control."+ },+ {+ "number": "27",+ "name": "GPIO7 (/OE2)",+ "type": "bidirectional",+ "description": "GPIO7, used as /OE2, the sink port 2 TMDS output enable."+ },+ {+ "number": "28",+ "name": "GPIO8 (I2CEN2)",+ "type": "bidirectional",+ "description": "GPIO8, used as I2CEN2, the sink port 2 DDC I2C output enable."+ },+ {+ "number": "29",+ "name": "GPIO9 (PRE2)",+ "type": "bidirectional",+ "description": "GPIO9, used as PRE2, the sink port 2 TMDS AC de-emphasis mode selector."+ },+ {+ "number": "30",+ "name": "GPIO10 (SP)",+ "type": "bidirectional",+ "description": "GPIO10, used as SP, the sink priority selector."+ },+ {+ "number": "31",+ "name": "GE",+ "type": "input",+ "description": "GPIO enable: low selects the local I2C pins as active with GPIO pins high impedance; high selects GPIO pins as active with local I2C pins high impedance."+ },+ {+ "number": "32",+ "name": "OVS",+ "type": "bidirectional",+ "description": "GPIO11, used as OVS, the SCL_SINK/SDA_SINK output voltage select."+ },+ {+ "number": "33",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "34",+ "name": "Y24",+ "type": "output",+ "description": "Sink port 2 TMDS positive output; high impedance when disabled."+ },+ {+ "number": "35",+ "name": "Z24",+ "type": "output",+ "description": "Sink port 2 TMDS negative output; high impedance when disabled."+ },+ {+ "number": "36",+ "name": "Vcc",+ "type": "power_in",+ "description": "Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal)."+ },+ {+ "number": "37",+ "name": "Y23",+ "type": "output",+ "description": "Sink port 2 TMDS positive output; high impedance when disabled."+ },+ {+ "number": "38",+ "name": "Z23",+ "type": "output",+ "description": "Sink port 2 TMDS negative output; high impedance when disabled."+ },+ {+ "number": "39",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "40",+ "name": "Y22",+ "type": "output",+ "description": "Sink port 2 TMDS positive output; high impedance when disabled."+ },+ {+ "number": "41",+ "name": "Z22",+ "type": "output",+ "description": "Sink port 2 TMDS negative output; high impedance when disabled."+ },+ {+ "number": "42",+ "name": "Vcc",+ "type": "power_in",+ "description": "Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal)."+ },+ {+ "number": "43",+ "name": "Y21",+ "type": "output",+ "description": "Sink port 2 TMDS positive output; high impedance when disabled."+ },+ {+ "number": "44",+ "name": "Z21",+ "type": "output",+ "description": "Sink port 2 TMDS negative output; high impedance when disabled."+ },+ {+ "number": "45",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "46",+ "name": "SCL_SINK2",+ "type": "bidirectional",+ "description": "Sink port 2 DDC I2C clock line; absolute maximum 6 V."+ },+ {+ "number": "47",+ "name": "SDA_SINK2",+ "type": "bidirectional",+ "description": "Sink port 2 DDC I2C data line; absolute maximum 6 V."+ },+ {+ "number": "48",+ "name": "5V_SINK2",+ "type": "output",+ "description": "Sink port 2 5-V power indicator output, pulled down internally so it stays low until a valid high is received."+ },+ {+ "number": "49",+ "name": "HPD_SINK2",+ "type": "input",+ "description": "Sink port 2 hot plug detector input; absolute maximum 6 V."+ },+ {+ "number": "50",+ "name": "Vcc",+ "type": "power_in",+ "description": "Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal)."+ },+ {+ "number": "51",+ "name": "VSADJ",+ "type": "input",+ "description": "TMDS compliant voltage swing control; set by an external resistor of 4.6 to 4.68 kΩ."+ },+ {+ "number": "52",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "53",+ "name": "Y14",+ "type": "output",+ "description": "Sink port 1 TMDS positive output; high impedance when disabled."+ },+ {+ "number": "54",+ "name": "Z14",+ "type": "output",+ "description": "Sink port 1 TMDS negative output; high impedance when disabled."+ },+ {+ "number": "55",+ "name": "Vcc",+ "type": "power_in",+ "description": "Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal)."+ },+ {+ "number": "56",+ "name": "Y13",+ "type": "output",+ "description": "Sink port 1 TMDS positive output; high impedance when disabled."+ },+ {+ "number": "57",+ "name": "Z13",+ "type": "output",+ "description": "Sink port 1 TMDS negative output; high impedance when disabled."+ },+ {+ "number": "58",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "59",+ "name": "Y12",+ "type": "output",+ "description": "Sink port 1 TMDS positive output; high impedance when disabled."+ },+ {+ "number": "60",+ "name": "Z12",+ "type": "output",+ "description": "Sink port 1 TMDS negative output; high impedance when disabled."+ },+ {+ "number": "61",+ "name": "Vcc",+ "type": "power_in",+ "description": "Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal)."+ },+ {+ "number": "62",+ "name": "Y11",+ "type": "output",+ "description": "Sink port 1 TMDS positive output; high impedance when disabled."+ },+ {+ "number": "63",+ "name": "Z11",+ "type": "output",+ "description": "Sink port 1 TMDS negative output; high impedance when disabled."+ },+ {+ "number": "64",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "65",+ "name": "SCL_SINK1",+ "type": "bidirectional",+ "description": "Sink port 1 DDC I2C clock line; absolute maximum 6 V."+ },+ {+ "number": "66",+ "name": "SDA_SINK1",+ "type": "bidirectional",+ "description": "Sink port 1 DDC I2C data line; absolute maximum 6 V."+ },+ {+ "number": "67",+ "name": "5V_SINK1",+ "type": "output",+ "description": "Sink port 1 5-V power indicator output, pulled down internally so it stays low until a valid high is received."+ },+ {+ "number": "68",+ "name": "HPD_SINK1",+ "type": "input",+ "description": "Sink port 1 hot plug detector input; absolute maximum 6 V."+ },+ {+ "number": "69",+ "name": "Vcc",+ "type": "power_in",+ "description": "Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal)."+ },+ {+ "number": "70",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "71",+ "name": "LC_A1",+ "type": "input",+ "description": "Local I2C address bit 1."+ },+ {+ "number": "72",+ "name": "LC_A0",+ "type": "input",+ "description": "Local I2C address bit 0."+ },+ {+ "number": "73",+ "name": "LC_SDA",+ "type": "bidirectional",+ "description": "Local I2C data line; control input LVTTL, absolute maximum 4 V."+ },+ {+ "number": "74",+ "name": "LC_SCL",+ "type": "bidirectional",+ "description": "Local I2C clock line; control input LVTTL, absolute maximum 4 V."+ },+ {+ "number": "75",+ "name": "Vcc",+ "type": "power_in",+ "description": "Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal)."+ },+ {+ "number": "76",+ "name": "HPD4",+ "type": "output",+ "description": "Source port 4 hot plug detector output."+ },+ {+ "number": "77",+ "name": "5V_PWR4",+ "type": "input",+ "description": "Source port 4 5-V power signal input; absolute maximum 6 V."+ },+ {+ "number": "78",+ "name": "SDA4",+ "type": "bidirectional",+ "description": "Source port 4 DDC I2C data line; absolute maximum 6 V."+ },+ {+ "number": "79",+ "name": "SCL4",+ "type": "bidirectional",+ "description": "Source port 4 DDC I2C clock line; absolute maximum 6 V."+ },+ {+ "number": "80",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "81",+ "name": "B41",+ "type": "input",+ "description": "Source port 4 TMDS negative input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "82",+ "name": "A41",+ "type": "input",+ "description": "Source port 4 TMDS positive input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "83",+ "name": "Vcc",+ "type": "power_in",+ "description": "Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal)."+ },+ {+ "number": "84",+ "name": "B42",+ "type": "input",+ "description": "Source port 4 TMDS negative input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "85",+ "name": "A42",+ "type": "input",+ "description": "Source port 4 TMDS positive input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "86",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "87",+ "name": "B43",+ "type": "input",+ "description": "Source port 4 TMDS negative input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "88",+ "name": "A43",+ "type": "input",+ "description": "Source port 4 TMDS positive input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "89",+ "name": "Vcc",+ "type": "power_in",+ "description": "Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal)."+ },+ {+ "number": "90",+ "name": "B44",+ "type": "input",+ "description": "Source port 4 TMDS negative input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "91",+ "name": "A44",+ "type": "input",+ "description": "Source port 4 TMDS positive input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "92",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "93",+ "name": "Vcc",+ "type": "power_in",+ "description": "Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal)."+ },+ {+ "number": "94",+ "name": "HPD3",+ "type": "output",+ "description": "Source port 3 hot plug detector output."+ },+ {+ "number": "95",+ "name": "5V_PWR3",+ "type": "input",+ "description": "Source port 3 5-V power signal input; absolute maximum 6 V."+ },+ {+ "number": "96",+ "name": "SDA3",+ "type": "bidirectional",+ "description": "Source port 3 DDC I2C data line; absolute maximum 6 V."+ },+ {+ "number": "97",+ "name": "SCL3",+ "type": "bidirectional",+ "description": "Source port 3 DDC I2C clock line; absolute maximum 6 V."+ },+ {+ "number": "98",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "99",+ "name": "B31",+ "type": "input",+ "description": "Source port 3 TMDS negative input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "100",+ "name": "A31",+ "type": "input",+ "description": "Source port 3 TMDS positive input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "101",+ "name": "Vcc",+ "type": "power_in",+ "description": "Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal)."+ },+ {+ "number": "102",+ "name": "B32",+ "type": "input",+ "description": "Source port 3 TMDS negative input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "103",+ "name": "A32",+ "type": "input",+ "description": "Source port 3 TMDS positive input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "104",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "105",+ "name": "B33",+ "type": "input",+ "description": "Source port 3 TMDS negative input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "106",+ "name": "A33",+ "type": "input",+ "description": "Source port 3 TMDS positive input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "107",+ "name": "Vcc",+ "type": "power_in",+ "description": "Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal)."+ },+ {+ "number": "108",+ "name": "B34",+ "type": "input",+ "description": "Source port 3 TMDS negative input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "109",+ "name": "A34",+ "type": "input",+ "description": "Source port 3 TMDS positive input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "110",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "111",+ "name": "Vcc",+ "type": "power_in",+ "description": "Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal)."+ },+ {+ "number": "112",+ "name": "HPD2",+ "type": "output",+ "description": "Source port 2 hot plug detector output."+ },+ {+ "number": "113",+ "name": "5V_PWR2",+ "type": "input",+ "description": "Source port 2 5-V power signal input; absolute maximum 6 V."+ },+ {+ "number": "114",+ "name": "SDA2",+ "type": "bidirectional",+ "description": "Source port 2 DDC I2C data line; absolute maximum 6 V."+ },+ {+ "number": "115",+ "name": "SCL2",+ "type": "bidirectional",+ "description": "Source port 2 DDC I2C clock line; absolute maximum 6 V."+ },+ {+ "number": "116",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "117",+ "name": "B21",+ "type": "input",+ "description": "Source port 2 TMDS negative input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "118",+ "name": "A21",+ "type": "input",+ "description": "Source port 2 TMDS positive input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "119",+ "name": "Vcc",+ "type": "power_in",+ "description": "Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal)."+ },+ {+ "number": "120",+ "name": "B22",+ "type": "input",+ "description": "Source port 2 TMDS negative input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "121",+ "name": "A22",+ "type": "input",+ "description": "Source port 2 TMDS positive input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "122",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "123",+ "name": "B23",+ "type": "input",+ "description": "Source port 2 TMDS negative input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "124",+ "name": "A23",+ "type": "input",+ "description": "Source port 2 TMDS positive input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "125",+ "name": "Vcc",+ "type": "power_in",+ "description": "Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal)."+ },+ {+ "number": "126",+ "name": "B24",+ "type": "input",+ "description": "Source port 2 TMDS negative input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "127",+ "name": "A24",+ "type": "input",+ "description": "Source port 2 TMDS positive input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "128",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The terminal table lists SCL1 against pin 54, but pin 54 is Z14 in the same table (Z11-Z14 = 63,60,5; The terminal table gives no pin number for SDA1; pin 4 was inferred from the page-4 drawing sequence; GPIO pins are typed bidirectional because they are named GPIO, but the datasheet marks several as co"+ ],+ "pages_sent": 10,+ "cost_usd": 0.1539,+ "at": "2026-10-11T01:33:26"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tmds442",+ "pages": 47,+ "sha256": "fed1b169dc376f19",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 128,+ "described": 128,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "tmds442pnpr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 16.0,+ 16.0,+ 1.5+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "7c58a84c7972bfb65ec57c1a8618dfc37e54897d86a32015ddb0c453a7af1827",+ "checked": "2026-10-11",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tmds442pnpr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 16.0,+ 16.0,+ 1.5+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "acd1f72cdc38bad7373bc6ef4dabb74f21ca72561a7c5f838a78156f7ac0976d",+ "checked": "2026-10-11",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ }+}
page.jsonadded+920@@ -0,0 +1,920 @@+{+ "slug": "tmds442pnpr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Interface - Specialized, LQFP-128(14x14). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "interface",+ "tmds442pnpr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tmds442pnpr.kicad_sym",+ "tmds442pnpr.kicad_mod",+ "tmds442pnpr.glb",+ "tmds442pnpr.step",+ "tmds442pnpr.lbr",+ "docs/hero.png",+ "docs/tmds442pnpr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "tmds442pnpr-hero.glb",+ "tmds442pnpr-hero.overlay.json"+ ],+ "component": {+ "mpn": "TMDS442PNPR",+ "manufacturer": "Texas Instruments",+ "package": "LQFP-128(14x14)",+ "pin_count": 128,+ "category": "Interface",+ "subcategory": "Interface - Specialized",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tmds442",+ "parts": {+ "symbol": "tmds442pnpr.kicad_sym",+ "footprint": "tmds442pnpr.kicad_mod",+ "model_3d": "tmds442pnpr-hero.glb",+ "model_3d_plain": "tmds442pnpr.glb",+ "model_3d_step": "tmds442pnpr-etched.step",+ "model_3d_step_plain": "tmds442pnpr.step",+ "lbr": "tmds442pnpr.lbr"+ },+ "distributor_links": {+ "lcsc": "C473346",+ "digikey": "296-21971-2-ND",+ "mouser": "595-TMDS442PNPR"+ },+ "distributor_check": {+ "checked_at": "2026-10-11T01:34:03Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-21971-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-TMDS442PNPR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "Vcc",+ "type": "power_in",+ "description": "Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal)."+ },+ {+ "number": "2",+ "name": "HPD1",+ "type": "output",+ "description": "Source port 1 hot plug detector output, pulled down internally so it stays low until a valid high is received."+ },+ {+ "number": "3",+ "name": "5V_PWR1",+ "type": "input",+ "description": "Source port 1 5-V power signal input, pulled down internally so it stays low until a valid high is received; absolute maximum 6 V."+ },+ {+ "number": "4",+ "name": "SDA1",+ "type": "bidirectional",+ "description": "Source port 1 DDC I2C data line, buffered by an I2C repeater that isolates bus capacitance; absolute maximum 6 V."+ },+ {+ "number": "5",+ "name": "SCL1",+ "type": "bidirectional",+ "description": "Source port 1 DDC I2C clock line, buffered by an I2C repeater that isolates bus capacitance; absolute maximum 6 V."+ },+ {+ "number": "6",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "7",+ "name": "B11",+ "type": "input",+ "description": "Source port 1 TMDS negative input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "8",+ "name": "A11",+ "type": "input",+ "description": "Source port 1 TMDS positive input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "9",+ "name": "Vcc",+ "type": "power_in",+ "description": "Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal)."+ },+ {+ "number": "10",+ "name": "B12",+ "type": "input",+ "description": "Source port 1 TMDS negative input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "11",+ "name": "A12",+ "type": "input",+ "description": "Source port 1 TMDS positive input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "12",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "13",+ "name": "B13",+ "type": "input",+ "description": "Source port 1 TMDS negative input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "14",+ "name": "A13",+ "type": "input",+ "description": "Source port 1 TMDS positive input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "15",+ "name": "Vcc",+ "type": "power_in",+ "description": "Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal)."+ },+ {+ "number": "16",+ "name": "B14",+ "type": "input",+ "description": "Source port 1 TMDS negative input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "17",+ "name": "A14",+ "type": "input",+ "description": "Source port 1 TMDS positive input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "18",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "19",+ "name": "Vcc",+ "type": "power_in",+ "description": "Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal)."+ },+ {+ "number": "20",+ "name": "GPIO0 (SA1)",+ "type": "bidirectional",+ "description": "GPIO0, used as SA1, the sink port 1 source selector control."+ },+ {+ "number": "21",+ "name": "GPIO1 (SB1)",+ "type": "bidirectional",+ "description": "GPIO1, used as SB1, the sink port 1 source selector control."+ },+ {+ "number": "22",+ "name": "GPIO2 (/OE1)",+ "type": "bidirectional",+ "description": "GPIO2, used as /OE1, the sink port 1 TMDS output enable."+ },+ {+ "number": "23",+ "name": "GPIO3 (I2CEN1)",+ "type": "bidirectional",+ "description": "GPIO3, used as I2CEN1, the sink port 1 DDC I2C output enable."+ },+ {+ "number": "24",+ "name": "GPIO4 (PRE1)",+ "type": "bidirectional",+ "description": "GPIO4, used as PRE1, the sink port 1 TMDS AC de-emphasis mode selector."+ },+ {+ "number": "25",+ "name": "GPIO5 (SA2)",+ "type": "bidirectional",+ "description": "GPIO5, used as SA2, the sink port 2 source selector control."+ },+ {+ "number": "26",+ "name": "GPIO6 (SB2)",+ "type": "bidirectional",+ "description": "GPIO6, used as SB2, the sink port 2 source selector control."+ },+ {+ "number": "27",+ "name": "GPIO7 (/OE2)",+ "type": "bidirectional",+ "description": "GPIO7, used as /OE2, the sink port 2 TMDS output enable."+ },+ {+ "number": "28",+ "name": "GPIO8 (I2CEN2)",+ "type": "bidirectional",+ "description": "GPIO8, used as I2CEN2, the sink port 2 DDC I2C output enable."+ },+ {+ "number": "29",+ "name": "GPIO9 (PRE2)",+ "type": "bidirectional",+ "description": "GPIO9, used as PRE2, the sink port 2 TMDS AC de-emphasis mode selector."+ },+ {+ "number": "30",+ "name": "GPIO10 (SP)",+ "type": "bidirectional",+ "description": "GPIO10, used as SP, the sink priority selector."+ },+ {+ "number": "31",+ "name": "GE",+ "type": "input",+ "description": "GPIO enable: low selects the local I2C pins as active with GPIO pins high impedance; high selects GPIO pins as active with local I2C pins high impedance."+ },+ {+ "number": "32",+ "name": "OVS",+ "type": "bidirectional",+ "description": "GPIO11, used as OVS, the SCL_SINK/SDA_SINK output voltage select."+ },+ {+ "number": "33",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "34",+ "name": "Y24",+ "type": "output",+ "description": "Sink port 2 TMDS positive output; high impedance when disabled."+ },+ {+ "number": "35",+ "name": "Z24",+ "type": "output",+ "description": "Sink port 2 TMDS negative output; high impedance when disabled."+ },+ {+ "number": "36",+ "name": "Vcc",+ "type": "power_in",+ "description": "Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal)."+ },+ {+ "number": "37",+ "name": "Y23",+ "type": "output",+ "description": "Sink port 2 TMDS positive output; high impedance when disabled."+ },+ {+ "number": "38",+ "name": "Z23",+ "type": "output",+ "description": "Sink port 2 TMDS negative output; high impedance when disabled."+ },+ {+ "number": "39",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "40",+ "name": "Y22",+ "type": "output",+ "description": "Sink port 2 TMDS positive output; high impedance when disabled."+ },+ {+ "number": "41",+ "name": "Z22",+ "type": "output",+ "description": "Sink port 2 TMDS negative output; high impedance when disabled."+ },+ {+ "number": "42",+ "name": "Vcc",+ "type": "power_in",+ "description": "Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal)."+ },+ {+ "number": "43",+ "name": "Y21",+ "type": "output",+ "description": "Sink port 2 TMDS positive output; high impedance when disabled."+ },+ {+ "number": "44",+ "name": "Z21",+ "type": "output",+ "description": "Sink port 2 TMDS negative output; high impedance when disabled."+ },+ {+ "number": "45",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "46",+ "name": "SCL_SINK2",+ "type": "bidirectional",+ "description": "Sink port 2 DDC I2C clock line; absolute maximum 6 V."+ },+ {+ "number": "47",+ "name": "SDA_SINK2",+ "type": "bidirectional",+ "description": "Sink port 2 DDC I2C data line; absolute maximum 6 V."+ },+ {+ "number": "48",+ "name": "5V_SINK2",+ "type": "output",+ "description": "Sink port 2 5-V power indicator output, pulled down internally so it stays low until a valid high is received."+ },+ {+ "number": "49",+ "name": "HPD_SINK2",+ "type": "input",+ "description": "Sink port 2 hot plug detector input; absolute maximum 6 V."+ },+ {+ "number": "50",+ "name": "Vcc",+ "type": "power_in",+ "description": "Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal)."+ },+ {+ "number": "51",+ "name": "VSADJ",+ "type": "input",+ "description": "TMDS compliant voltage swing control; set by an external resistor of 4.6 to 4.68 kΩ."+ },+ {+ "number": "52",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "53",+ "name": "Y14",+ "type": "output",+ "description": "Sink port 1 TMDS positive output; high impedance when disabled."+ },+ {+ "number": "54",+ "name": "Z14",+ "type": "output",+ "description": "Sink port 1 TMDS negative output; high impedance when disabled."+ },+ {+ "number": "55",+ "name": "Vcc",+ "type": "power_in",+ "description": "Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal)."+ },+ {+ "number": "56",+ "name": "Y13",+ "type": "output",+ "description": "Sink port 1 TMDS positive output; high impedance when disabled."+ },+ {+ "number": "57",+ "name": "Z13",+ "type": "output",+ "description": "Sink port 1 TMDS negative output; high impedance when disabled."+ },+ {+ "number": "58",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "59",+ "name": "Y12",+ "type": "output",+ "description": "Sink port 1 TMDS positive output; high impedance when disabled."+ },+ {+ "number": "60",+ "name": "Z12",+ "type": "output",+ "description": "Sink port 1 TMDS negative output; high impedance when disabled."+ },+ {+ "number": "61",+ "name": "Vcc",+ "type": "power_in",+ "description": "Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal)."+ },+ {+ "number": "62",+ "name": "Y11",+ "type": "output",+ "description": "Sink port 1 TMDS positive output; high impedance when disabled."+ },+ {+ "number": "63",+ "name": "Z11",+ "type": "output",+ "description": "Sink port 1 TMDS negative output; high impedance when disabled."+ },+ {+ "number": "64",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "65",+ "name": "SCL_SINK1",+ "type": "bidirectional",+ "description": "Sink port 1 DDC I2C clock line; absolute maximum 6 V."+ },+ {+ "number": "66",+ "name": "SDA_SINK1",+ "type": "bidirectional",+ "description": "Sink port 1 DDC I2C data line; absolute maximum 6 V."+ },+ {+ "number": "67",+ "name": "5V_SINK1",+ "type": "output",+ "description": "Sink port 1 5-V power indicator output, pulled down internally so it stays low until a valid high is received."+ },+ {+ "number": "68",+ "name": "HPD_SINK1",+ "type": "input",+ "description": "Sink port 1 hot plug detector input; absolute maximum 6 V."+ },+ {+ "number": "69",+ "name": "Vcc",+ "type": "power_in",+ "description": "Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal)."+ },+ {+ "number": "70",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "71",+ "name": "LC_A1",+ "type": "input",+ "description": "Local I2C address bit 1."+ },+ {+ "number": "72",+ "name": "LC_A0",+ "type": "input",+ "description": "Local I2C address bit 0."+ },+ {+ "number": "73",+ "name": "LC_SDA",+ "type": "bidirectional",+ "description": "Local I2C data line; control input LVTTL, absolute maximum 4 V."+ },+ {+ "number": "74",+ "name": "LC_SCL",+ "type": "bidirectional",+ "description": "Local I2C clock line; control input LVTTL, absolute maximum 4 V."+ },+ {+ "number": "75",+ "name": "Vcc",+ "type": "power_in",+ "description": "Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal)."+ },+ {+ "number": "76",+ "name": "HPD4",+ "type": "output",+ "description": "Source port 4 hot plug detector output."+ },+ {+ "number": "77",+ "name": "5V_PWR4",+ "type": "input",+ "description": "Source port 4 5-V power signal input; absolute maximum 6 V."+ },+ {+ "number": "78",+ "name": "SDA4",+ "type": "bidirectional",+ "description": "Source port 4 DDC I2C data line; absolute maximum 6 V."+ },+ {+ "number": "79",+ "name": "SCL4",+ "type": "bidirectional",+ "description": "Source port 4 DDC I2C clock line; absolute maximum 6 V."+ },+ {+ "number": "80",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "81",+ "name": "B41",+ "type": "input",+ "description": "Source port 4 TMDS negative input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "82",+ "name": "A41",+ "type": "input",+ "description": "Source port 4 TMDS positive input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "83",+ "name": "Vcc",+ "type": "power_in",+ "description": "Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal)."+ },+ {+ "number": "84",+ "name": "B42",+ "type": "input",+ "description": "Source port 4 TMDS negative input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "85",+ "name": "A42",+ "type": "input",+ "description": "Source port 4 TMDS positive input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "86",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "87",+ "name": "B43",+ "type": "input",+ "description": "Source port 4 TMDS negative input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "88",+ "name": "A43",+ "type": "input",+ "description": "Source port 4 TMDS positive input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "89",+ "name": "Vcc",+ "type": "power_in",+ "description": "Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal)."+ },+ {+ "number": "90",+ "name": "B44",+ "type": "input",+ "description": "Source port 4 TMDS negative input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "91",+ "name": "A44",+ "type": "input",+ "description": "Source port 4 TMDS positive input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "92",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "93",+ "name": "Vcc",+ "type": "power_in",+ "description": "Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal)."+ },+ {+ "number": "94",+ "name": "HPD3",+ "type": "output",+ "description": "Source port 3 hot plug detector output."+ },+ {+ "number": "95",+ "name": "5V_PWR3",+ "type": "input",+ "description": "Source port 3 5-V power signal input; absolute maximum 6 V."+ },+ {+ "number": "96",+ "name": "SDA3",+ "type": "bidirectional",+ "description": "Source port 3 DDC I2C data line; absolute maximum 6 V."+ },+ {+ "number": "97",+ "name": "SCL3",+ "type": "bidirectional",+ "description": "Source port 3 DDC I2C clock line; absolute maximum 6 V."+ },+ {+ "number": "98",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "99",+ "name": "B31",+ "type": "input",+ "description": "Source port 3 TMDS negative input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "100",+ "name": "A31",+ "type": "input",+ "description": "Source port 3 TMDS positive input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "101",+ "name": "Vcc",+ "type": "power_in",+ "description": "Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal)."+ },+ {+ "number": "102",+ "name": "B32",+ "type": "input",+ "description": "Source port 3 TMDS negative input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "103",+ "name": "A32",+ "type": "input",+ "description": "Source port 3 TMDS positive input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "104",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "105",+ "name": "B33",+ "type": "input",+ "description": "Source port 3 TMDS negative input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "106",+ "name": "A33",+ "type": "input",+ "description": "Source port 3 TMDS positive input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "107",+ "name": "Vcc",+ "type": "power_in",+ "description": "Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal)."+ },+ {+ "number": "108",+ "name": "B34",+ "type": "input",+ "description": "Source port 3 TMDS negative input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "109",+ "name": "A34",+ "type": "input",+ "description": "Source port 3 TMDS positive input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "110",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "111",+ "name": "Vcc",+ "type": "power_in",+ "description": "Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal)."+ },+ {+ "number": "112",+ "name": "HPD2",+ "type": "output",+ "description": "Source port 2 hot plug detector output."+ },+ {+ "number": "113",+ "name": "5V_PWR2",+ "type": "input",+ "description": "Source port 2 5-V power signal input; absolute maximum 6 V."+ },+ {+ "number": "114",+ "name": "SDA2",+ "type": "bidirectional",+ "description": "Source port 2 DDC I2C data line; absolute maximum 6 V."+ },+ {+ "number": "115",+ "name": "SCL2",+ "type": "bidirectional",+ "description": "Source port 2 DDC I2C clock line; absolute maximum 6 V."+ },+ {+ "number": "116",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "117",+ "name": "B21",+ "type": "input",+ "description": "Source port 2 TMDS negative input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "118",+ "name": "A21",+ "type": "input",+ "description": "Source port 2 TMDS positive input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "119",+ "name": "Vcc",+ "type": "power_in",+ "description": "Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal)."+ },+ {+ "number": "120",+ "name": "B22",+ "type": "input",+ "description": "Source port 2 TMDS negative input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "121",+ "name": "A22",+ "type": "input",+ "description": "Source port 2 TMDS positive input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "122",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "123",+ "name": "B23",+ "type": "input",+ "description": "Source port 2 TMDS negative input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "124",+ "name": "A23",+ "type": "input",+ "description": "Source port 2 TMDS positive input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "125",+ "name": "Vcc",+ "type": "power_in",+ "description": "Power supply, 3.0 V minimum to 3.6 V maximum (3.3 V nominal)."+ },+ {+ "number": "126",+ "name": "B24",+ "type": "input",+ "description": "Source port 2 TMDS negative input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "127",+ "name": "A24",+ "type": "input",+ "description": "Source port 2 TMDS positive input, with 50-Ω termination to VCC and 8-dB equalizer; differential input 150 to 1560 mVp-p, signaling up to 2.25 Gbps."+ },+ {+ "number": "128",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The terminal table lists SCL1 against pin 54, but pin 54 is Z14 in the same table (Z11-Z14 = 63,60,5; The terminal table gives no pin number for SDA1; pin 4 was inferred from the page-4 drawing sequence; GPIO pins are typed bidirectional because they are named GPIO, but the datasheet marks several as co"+ ],+ "pages_sent": 10,+ "cost_usd": 0.1539,+ "at": "2026-10-11T01:33:26"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tmds442",+ "pages": 47,+ "sha256": "fed1b169dc376f19",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 128,+ "described": 128,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "tmds442pnpr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 16,+ 16,+ 1.5+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "7c58a84c7972bfb65ec57c1a8618dfc37e54897d86a32015ddb0c453a7af1827",+ "checked": "2026-10-11",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tmds442pnpr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 16,+ 16,+ 1.5+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "acd1f72cdc38bad7373bc6ef4dabb74f21ca72561a7c5f838a78156f7ac0976d",+ "checked": "2026-10-11",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}
tmds442pnpr-hero.glbadded⋯ 1 unchanged line ⋯
tmds442pnpr-hero.overlay.jsonadded+2900@@ -0,0 +1,2900 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "TMDS442PNPR",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 128,+ "span_mm": 16.8,+ "dash_mm": 0.42,+ "gap_mm": 0.252,+ "pad_stroke_mm": 0.09+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 9,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 128,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 1.344,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -8.0,+ 8.0,+ -8.0,+ 8.0+ ],+ "pads_bbox_mm": [+ -8.4,+ 8.4,+ -8.4,+ 8.4+ ],+ "seating_z_mm": -0.0+ },+ "sources": {+ "glb": "tmds442pnpr.glb",+ "glb_sha256": "4a2bd6e8335ddd8eed2e4d769ea7a904639de654594348c68e13184e1a7db113",+ "footprint": "tmds442pnpr.kicad_mod",+ "footprint_sha256": "8941e8b86e58c9f1487359af4a207b3bf7c97ce8e3a48bb630f4ee484fa3eda7",+ "pins": "page.json component.pins",+ "pins_sha256": "62374b9d253cfef622f0485c0417a46c4e2ae66fc6ec76f4dff2a2444a6a34c8"+ },+ "generator": "adom-wiki 1.7.69 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "Vcc",+ "x": -8.5,+ "y": -6.2,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "2",+ "text": "HPD1",+ "x": -8.5,+ "y": -5.8,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "3",+ "text": "5V_PWR1",+ "x": -8.5,+ "y": -5.4,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "4",+ "text": "SDA1",+ "x": -8.5,+ "y": -5.0,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "5",+ "text": "SCL1",+ "x": -8.5,+ "y": -4.6,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "6",+ "text": "GND",+ "x": -8.5,+ "y": -4.2,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "7",+ "text": "B11",+ "x": -8.5,+ "y": -3.8,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "8",+ "text": "A11",+ "x": -8.5,+ "y": -3.4,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "9",+ "text": "Vcc",+ "x": -8.5,+ "y": -3.0,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "10",+ "text": "B12",+ "x": -8.5,+ "y": -2.6,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "11",+ "text": "A12",+ "x": -8.5,+ "y": -2.2,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "12",+ "text": "GND",+ "x": -8.5,+ "y": -1.8,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "13",+ "text": "B13",+ "x": -8.5,+ "y": -1.4,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "14",+ "text": "A13",+ "x": -8.5,+ "y": -1.0,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "15",+ "text": "Vcc",+ "x": -8.5,+ "y": -0.6,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "16",+ "text": "B14",+ "x": -8.5,+ "y": -0.2,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "17",+ "text": "A14",+ "x": -8.5,+ "y": 0.2,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "18",+ "text": "GND",+ "x": -8.5,+ "y": 0.6,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "19",+ "text": "Vcc",+ "x": -8.5,+ "y": 1.0,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "20",+ "text": "GPIO0 (SA1)",+ "x": -8.5,+ "y": 1.4,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "21",+ "text": "GPIO1 (SB1)",+ "x": -8.5,+ "y": 1.8,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "22",+ "text": "GPIO2 (/OE1)",+ "x": -8.5,+ "y": 2.2,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "23",+ "text": "GPIO3 (I2CEN1)",+ "x": -8.5,+ "y": 2.6,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "24",+ "text": "GPIO4 (PRE1)",+ "x": -8.5,+ "y": 3.0,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "25",+ "text": "GPIO5 (SA2)",+ "x": -8.5,+ "y": 3.4,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "26",+ "text": "GPIO6 (SB2)",+ "x": -8.5,+ "y": 3.8,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "27",+ "text": "GPIO7 (/OE2)",+ "x": -8.5,+ "y": 4.2,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "28",+ "text": "GPIO8 (I2CEN2)",+ "x": -8.5,+ "y": 4.6,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "29",+ "text": "GPIO9 (PRE2)",+ "x": -8.5,+ "y": 5.0,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "30",+ "text": "GPIO10 (SP)",+ "x": -8.5,+ "y": 5.4,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "31",+ "text": "GE",+ "x": -8.5,+ "y": 5.8,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "32",+ "text": "OVS",+ "x": -8.5,+ "y": 6.2,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "33",+ "text": "GND",+ "x": -6.2,+ "y": 8.5,+ "align": "right",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "34",+ "text": "Y24",+ "x": -5.8,+ "y": 8.5,+ "align": "right",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "35",+ "text": "Z24",+ "x": -5.4,+ "y": 8.5,+ "align": "right",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "36",+ "text": "Vcc",+ "x": -5.0,+ "y": 8.5,+ "align": "right",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "37",+ "text": "Y23",+ "x": -4.6,+ "y": 8.5,+ "align": "right",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "38",+ "text": "Z23",+ "x": -4.2,+ "y": 8.5,+ "align": "right",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "39",+ "text": "GND",+ "x": -3.8,+ "y": 8.5,+ "align": "right",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "40",+ "text": "Y22",+ "x": -3.4,+ "y": 8.5,+ "align": "right",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "41",+ "text": "Z22",+ "x": -3.0,+ "y": 8.5,+ "align": "right",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "42",+ "text": "Vcc",+ "x": -2.6,+ "y": 8.5,+ "align": "right",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "43",+ "text": "Y21",+ "x": -2.2,+ "y": 8.5,+ "align": "right",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "44",+ "text": "Z21",+ "x": -1.8,+ "y": 8.5,+ "align": "right",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "45",+ "text": "GND",+ "x": -1.4,+ "y": 8.5,+ "align": "right",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "46",+ "text": "SCL_SINK2",+ "x": -1.0,+ "y": 8.5,+ "align": "right",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "47",+ "text": "SDA_SINK2",+ "x": -0.6,+ "y": 8.5,+ "align": "right",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "48",+ "text": "5V_SINK2",+ "x": -0.2,+ "y": 8.5,+ "align": "right",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "49",+ "text": "HPD_SINK2",+ "x": 0.2,+ "y": 8.5,+ "align": "right",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "50",+ "text": "Vcc",+ "x": 0.6,+ "y": 8.5,+ "align": "right",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "51",+ "text": "VSADJ",+ "x": 1.0,+ "y": 8.5,+ "align": "right",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "52",+ "text": "GND",+ "x": 1.4,+ "y": 8.5,+ "align": "right",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "53",+ "text": "Y14",+ "x": 1.8,+ "y": 8.5,+ "align": "right",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "54",+ "text": "Z14",+ "x": 2.2,+ "y": 8.5,+ "align": "right",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "55",+ "text": "Vcc",+ "x": 2.6,+ "y": 8.5,+ "align": "right",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "56",+ "text": "Y13",+ "x": 3.0,+ "y": 8.5,+ "align": "right",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "57",+ "text": "Z13",+ "x": 3.4,+ "y": 8.5,+ "align": "right",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "58",+ "text": "GND",+ "x": 3.8,+ "y": 8.5,+ "align": "right",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "59",+ "text": "Y12",+ "x": 4.2,+ "y": 8.5,+ "align": "right",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "60",+ "text": "Z12",+ "x": 4.6,+ "y": 8.5,+ "align": "right",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "61",+ "text": "Vcc",+ "x": 5.0,+ "y": 8.5,+ "align": "right",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "62",+ "text": "Y11",+ "x": 5.4,+ "y": 8.5,+ "align": "right",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "63",+ "text": "Z11",+ "x": 5.8,+ "y": 8.5,+ "align": "right",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "64",+ "text": "GND",+ "x": 6.2,+ "y": 8.5,+ "align": "right",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "65",+ "text": "SCL_SINK1",+ "x": 8.5,+ "y": 6.2,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "66",+ "text": "SDA_SINK1",+ "x": 8.5,+ "y": 5.8,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "67",+ "text": "5V_SINK1",+ "x": 8.5,+ "y": 5.4,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "68",+ "text": "HPD_SINK1",+ "x": 8.5,+ "y": 5.0,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "69",+ "text": "Vcc",+ "x": 8.5,+ "y": 4.6,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "70",+ "text": "GND",+ "x": 8.5,+ "y": 4.2,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "71",+ "text": "LC_A1",+ "x": 8.5,+ "y": 3.8,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "72",+ "text": "LC_A0",+ "x": 8.5,+ "y": 3.4,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "73",+ "text": "LC_SDA",+ "x": 8.5,+ "y": 3.0,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "74",+ "text": "LC_SCL",+ "x": 8.5,+ "y": 2.6,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "75",+ "text": "Vcc",+ "x": 8.5,+ "y": 2.2,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "76",+ "text": "HPD4",+ "x": 8.5,+ "y": 1.8,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "77",+ "text": "5V_PWR4",+ "x": 8.5,+ "y": 1.4,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "78",+ "text": "SDA4",+ "x": 8.5,+ "y": 1.0,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "79",+ "text": "SCL4",+ "x": 8.5,+ "y": 0.6,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "80",+ "text": "GND",+ "x": 8.5,+ "y": 0.2,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "81",+ "text": "B41",+ "x": 8.5,+ "y": -0.2,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "82",+ "text": "A41",+ "x": 8.5,+ "y": -0.6,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "83",+ "text": "Vcc",+ "x": 8.5,+ "y": -1.0,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "84",+ "text": "B42",+ "x": 8.5,+ "y": -1.4,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "85",+ "text": "A42",+ "x": 8.5,+ "y": -1.8,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "86",+ "text": "GND",+ "x": 8.5,+ "y": -2.2,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "87",+ "text": "B43",+ "x": 8.5,+ "y": -2.6,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "88",+ "text": "A43",+ "x": 8.5,+ "y": -3.0,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "89",+ "text": "Vcc",+ "x": 8.5,+ "y": -3.4,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "90",+ "text": "B44",+ "x": 8.5,+ "y": -3.8,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "91",+ "text": "A44",+ "x": 8.5,+ "y": -4.2,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "92",+ "text": "GND",+ "x": 8.5,+ "y": -4.6,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "93",+ "text": "Vcc",+ "x": 8.5,+ "y": -5.0,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "94",+ "text": "HPD3",+ "x": 8.5,+ "y": -5.4,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "95",+ "text": "5V_PWR3",+ "x": 8.5,+ "y": -5.8,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "96",+ "text": "SDA3",+ "x": 8.5,+ "y": -6.2,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "97",+ "text": "SCL3",+ "x": 6.2,+ "y": -8.5,+ "align": "left",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "98",+ "text": "GND",+ "x": 5.8,+ "y": -8.5,+ "align": "left",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "99",+ "text": "B31",+ "x": 5.4,+ "y": -8.5,+ "align": "left",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "100",+ "text": "A31",+ "x": 5.0,+ "y": -8.5,+ "align": "left",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "101",+ "text": "Vcc",+ "x": 4.6,+ "y": -8.5,+ "align": "left",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "102",+ "text": "B32",+ "x": 4.2,+ "y": -8.5,+ "align": "left",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "103",+ "text": "A32",+ "x": 3.8,+ "y": -8.5,+ "align": "left",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "104",+ "text": "GND",+ "x": 3.4,+ "y": -8.5,+ "align": "left",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "105",+ "text": "B33",+ "x": 3.0,+ "y": -8.5,+ "align": "left",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "106",+ "text": "A33",+ "x": 2.6,+ "y": -8.5,+ "align": "left",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "107",+ "text": "Vcc",+ "x": 2.2,+ "y": -8.5,+ "align": "left",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "108",+ "text": "B34",+ "x": 1.8,+ "y": -8.5,+ "align": "left",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "109",+ "text": "A34",+ "x": 1.4,+ "y": -8.5,+ "align": "left",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "110",+ "text": "GND",+ "x": 1.0,+ "y": -8.5,+ "align": "left",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "111",+ "text": "Vcc",+ "x": 0.6,+ "y": -8.5,+ "align": "left",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "112",+ "text": "HPD2",+ "x": 0.2,+ "y": -8.5,+ "align": "left",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "113",+ "text": "5V_PWR2",+ "x": -0.2,+ "y": -8.5,+ "align": "left",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "114",+ "text": "SDA2",+ "x": -0.6,+ "y": -8.5,+ "align": "left",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "115",+ "text": "SCL2",+ "x": -1.0,+ "y": -8.5,+ "align": "left",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "116",+ "text": "GND",+ "x": -1.4,+ "y": -8.5,+ "align": "left",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "117",+ "text": "B21",+ "x": -1.8,+ "y": -8.5,+ "align": "left",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "118",+ "text": "A21",+ "x": -2.2,+ "y": -8.5,+ "align": "left",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "119",+ "text": "Vcc",+ "x": -2.6,+ "y": -8.5,+ "align": "left",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "120",+ "text": "B22",+ "x": -3.0,+ "y": -8.5,+ "align": "left",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "121",+ "text": "A22",+ "x": -3.4,+ "y": -8.5,+ "align": "left",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "122",+ "text": "GND",+ "x": -3.8,+ "y": -8.5,+ "align": "left",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "123",+ "text": "B23",+ "x": -4.2,+ "y": -8.5,+ "align": "left",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "124",+ "text": "A23",+ "x": -4.6,+ "y": -8.5,+ "align": "left",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "125",+ "text": "Vcc",+ "x": -5.0,+ "y": -8.5,+ "align": "left",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "126",+ "text": "B24",+ "x": -5.4,+ "y": -8.5,+ "align": "left",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "127",+ "text": "A24",+ "x": -5.8,+ "y": -8.5,+ "align": "left",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "128",+ "text": "GND",+ "x": -6.2,+ "y": -8.5,+ "align": "left",+ "vertical": true,+ "h": 0.2+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -7.6625,+ -6.2+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -7.6625,+ -5.8+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -7.6625,+ -5.4+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "roundrect",+ "center_mm": [+ -7.6625,+ -5.0+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "roundrect",+ "center_mm": [+ -7.6625,+ -4.6+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "roundrect",+ "center_mm": [+ -7.6625,+ -4.2+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "roundrect",+ "center_mm": [+ -7.6625,+ -3.8+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "roundrect",+ "center_mm": [+ -7.6625,+ -3.4+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "9",+ "shape": "roundrect",+ "center_mm": [+ -7.6625,+ -3.0+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "10",+ "shape": "roundrect",+ "center_mm": [+ -7.6625,+ -2.6+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "11",+ "shape": "roundrect",+ "center_mm": [+ -7.6625,+ -2.2+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "12",+ "shape": "roundrect",+ "center_mm": [+ -7.6625,+ -1.8+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "13",+ "shape": "roundrect",+ "center_mm": [+ -7.6625,+ -1.4+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "14",+ "shape": "roundrect",+ "center_mm": [+ -7.6625,+ -1.0+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "15",+ "shape": "roundrect",+ "center_mm": [+ -7.6625,+ -0.6+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "16",+ "shape": "roundrect",+ "center_mm": [+ -7.6625,+ -0.2+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "17",+ "shape": "roundrect",+ "center_mm": [+ -7.6625,+ 0.2+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "18",+ "shape": "roundrect",+ "center_mm": [+ -7.6625,+ 0.6+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "19",+ "shape": "roundrect",+ "center_mm": [+ -7.6625,+ 1.0+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "20",+ "shape": "roundrect",+ "center_mm": [+ -7.6625,+ 1.4+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "21",+ "shape": "roundrect",+ "center_mm": [+ -7.6625,+ 1.8+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "22",+ "shape": "roundrect",+ "center_mm": [+ -7.6625,+ 2.2+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "23",+ "shape": "roundrect",+ "center_mm": [+ -7.6625,+ 2.6+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "24",+ "shape": "roundrect",+ "center_mm": [+ -7.6625,+ 3.0+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "25",+ "shape": "roundrect",+ "center_mm": [+ -7.6625,+ 3.4+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "26",+ "shape": "roundrect",+ "center_mm": [+ -7.6625,+ 3.8+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "27",+ "shape": "roundrect",+ "center_mm": [+ -7.6625,+ 4.2+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "28",+ "shape": "roundrect",+ "center_mm": [+ -7.6625,+ 4.6+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "29",+ "shape": "roundrect",+ "center_mm": [+ -7.6625,+ 5.0+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "30",+ "shape": "roundrect",+ "center_mm": [+ -7.6625,+ 5.4+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "31",+ "shape": "roundrect",+ "center_mm": [+ -7.6625,+ 5.8+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "32",+ "shape": "roundrect",+ "center_mm": [+ -7.6625,+ 6.2+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "33",+ "shape": "roundrect",+ "center_mm": [+ -6.2,+ 7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "34",+ "shape": "roundrect",+ "center_mm": [+ -5.8,+ 7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "35",+ "shape": "roundrect",+ "center_mm": [+ -5.4,+ 7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "36",+ "shape": "roundrect",+ "center_mm": [+ -5.0,+ 7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "37",+ "shape": "roundrect",+ "center_mm": [+ -4.6,+ 7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "38",+ "shape": "roundrect",+ "center_mm": [+ -4.2,+ 7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "39",+ "shape": "roundrect",+ "center_mm": [+ -3.8,+ 7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "40",+ "shape": "roundrect",+ "center_mm": [+ -3.4,+ 7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "41",+ "shape": "roundrect",+ "center_mm": [+ -3.0,+ 7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "42",+ "shape": "roundrect",+ "center_mm": [+ -2.6,+ 7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "43",+ "shape": "roundrect",+ "center_mm": [+ -2.2,+ 7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "44",+ "shape": "roundrect",+ "center_mm": [+ -1.8,+ 7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "45",+ "shape": "roundrect",+ "center_mm": [+ -1.4,+ 7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "46",+ "shape": "roundrect",+ "center_mm": [+ -1.0,+ 7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "47",+ "shape": "roundrect",+ "center_mm": [+ -0.6,+ 7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "48",+ "shape": "roundrect",+ "center_mm": [+ -0.2,+ 7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "49",+ "shape": "roundrect",+ "center_mm": [+ 0.2,+ 7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "50",+ "shape": "roundrect",+ "center_mm": [+ 0.6,+ 7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "51",+ "shape": "roundrect",+ "center_mm": [+ 1.0,+ 7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "52",+ "shape": "roundrect",+ "center_mm": [+ 1.4,+ 7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "53",+ "shape": "roundrect",+ "center_mm": [+ 1.8,+ 7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "54",+ "shape": "roundrect",+ "center_mm": [+ 2.2,+ 7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "55",+ "shape": "roundrect",+ "center_mm": [+ 2.6,+ 7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "56",+ "shape": "roundrect",+ "center_mm": [+ 3.0,+ 7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "57",+ "shape": "roundrect",+ "center_mm": [+ 3.4,+ 7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "58",+ "shape": "roundrect",+ "center_mm": [+ 3.8,+ 7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "59",+ "shape": "roundrect",+ "center_mm": [+ 4.2,+ 7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "60",+ "shape": "roundrect",+ "center_mm": [+ 4.6,+ 7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "61",+ "shape": "roundrect",+ "center_mm": [+ 5.0,+ 7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "62",+ "shape": "roundrect",+ "center_mm": [+ 5.4,+ 7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "63",+ "shape": "roundrect",+ "center_mm": [+ 5.8,+ 7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "64",+ "shape": "roundrect",+ "center_mm": [+ 6.2,+ 7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "65",+ "shape": "roundrect",+ "center_mm": [+ 7.6625,+ 6.2+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "66",+ "shape": "roundrect",+ "center_mm": [+ 7.6625,+ 5.8+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "67",+ "shape": "roundrect",+ "center_mm": [+ 7.6625,+ 5.4+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "68",+ "shape": "roundrect",+ "center_mm": [+ 7.6625,+ 5.0+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "69",+ "shape": "roundrect",+ "center_mm": [+ 7.6625,+ 4.6+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "70",+ "shape": "roundrect",+ "center_mm": [+ 7.6625,+ 4.2+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "71",+ "shape": "roundrect",+ "center_mm": [+ 7.6625,+ 3.8+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "72",+ "shape": "roundrect",+ "center_mm": [+ 7.6625,+ 3.4+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "73",+ "shape": "roundrect",+ "center_mm": [+ 7.6625,+ 3.0+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "74",+ "shape": "roundrect",+ "center_mm": [+ 7.6625,+ 2.6+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "75",+ "shape": "roundrect",+ "center_mm": [+ 7.6625,+ 2.2+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "76",+ "shape": "roundrect",+ "center_mm": [+ 7.6625,+ 1.8+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "77",+ "shape": "roundrect",+ "center_mm": [+ 7.6625,+ 1.4+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "78",+ "shape": "roundrect",+ "center_mm": [+ 7.6625,+ 1.0+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "79",+ "shape": "roundrect",+ "center_mm": [+ 7.6625,+ 0.6+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "80",+ "shape": "roundrect",+ "center_mm": [+ 7.6625,+ 0.2+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "81",+ "shape": "roundrect",+ "center_mm": [+ 7.6625,+ -0.2+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "82",+ "shape": "roundrect",+ "center_mm": [+ 7.6625,+ -0.6+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "83",+ "shape": "roundrect",+ "center_mm": [+ 7.6625,+ -1.0+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "84",+ "shape": "roundrect",+ "center_mm": [+ 7.6625,+ -1.4+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "85",+ "shape": "roundrect",+ "center_mm": [+ 7.6625,+ -1.8+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "86",+ "shape": "roundrect",+ "center_mm": [+ 7.6625,+ -2.2+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "87",+ "shape": "roundrect",+ "center_mm": [+ 7.6625,+ -2.6+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "88",+ "shape": "roundrect",+ "center_mm": [+ 7.6625,+ -3.0+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "89",+ "shape": "roundrect",+ "center_mm": [+ 7.6625,+ -3.4+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "90",+ "shape": "roundrect",+ "center_mm": [+ 7.6625,+ -3.8+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "91",+ "shape": "roundrect",+ "center_mm": [+ 7.6625,+ -4.2+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "92",+ "shape": "roundrect",+ "center_mm": [+ 7.6625,+ -4.6+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "93",+ "shape": "roundrect",+ "center_mm": [+ 7.6625,+ -5.0+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "94",+ "shape": "roundrect",+ "center_mm": [+ 7.6625,+ -5.4+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "95",+ "shape": "roundrect",+ "center_mm": [+ 7.6625,+ -5.8+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "96",+ "shape": "roundrect",+ "center_mm": [+ 7.6625,+ -6.2+ ],+ "size_mm": [+ 1.475,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "97",+ "shape": "roundrect",+ "center_mm": [+ 6.2,+ -7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "98",+ "shape": "roundrect",+ "center_mm": [+ 5.8,+ -7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "99",+ "shape": "roundrect",+ "center_mm": [+ 5.4,+ -7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "100",+ "shape": "roundrect",+ "center_mm": [+ 5.0,+ -7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "101",+ "shape": "roundrect",+ "center_mm": [+ 4.6,+ -7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "102",+ "shape": "roundrect",+ "center_mm": [+ 4.2,+ -7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "103",+ "shape": "roundrect",+ "center_mm": [+ 3.8,+ -7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "104",+ "shape": "roundrect",+ "center_mm": [+ 3.4,+ -7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "105",+ "shape": "roundrect",+ "center_mm": [+ 3.0,+ -7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "106",+ "shape": "roundrect",+ "center_mm": [+ 2.6,+ -7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "107",+ "shape": "roundrect",+ "center_mm": [+ 2.2,+ -7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "108",+ "shape": "roundrect",+ "center_mm": [+ 1.8,+ -7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "109",+ "shape": "roundrect",+ "center_mm": [+ 1.4,+ -7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "110",+ "shape": "roundrect",+ "center_mm": [+ 1.0,+ -7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "111",+ "shape": "roundrect",+ "center_mm": [+ 0.6,+ -7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "112",+ "shape": "roundrect",+ "center_mm": [+ 0.2,+ -7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "113",+ "shape": "roundrect",+ "center_mm": [+ -0.2,+ -7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "114",+ "shape": "roundrect",+ "center_mm": [+ -0.6,+ -7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "115",+ "shape": "roundrect",+ "center_mm": [+ -1.0,+ -7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "116",+ "shape": "roundrect",+ "center_mm": [+ -1.4,+ -7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "117",+ "shape": "roundrect",+ "center_mm": [+ -1.8,+ -7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "118",+ "shape": "roundrect",+ "center_mm": [+ -2.2,+ -7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "119",+ "shape": "roundrect",+ "center_mm": [+ -2.6,+ -7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "120",+ "shape": "roundrect",+ "center_mm": [+ -3.0,+ -7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "121",+ "shape": "roundrect",+ "center_mm": [+ -3.4,+ -7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "122",+ "shape": "roundrect",+ "center_mm": [+ -3.8,+ -7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "123",+ "shape": "roundrect",+ "center_mm": [+ -4.2,+ -7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "124",+ "shape": "roundrect",+ "center_mm": [+ -4.6,+ -7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "125",+ "shape": "roundrect",+ "center_mm": [+ -5.0,+ -7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "126",+ "shape": "roundrect",+ "center_mm": [+ -5.4,+ -7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "127",+ "shape": "roundrect",+ "center_mm": [+ -5.8,+ -7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ },+ {+ "number": "128",+ "shape": "roundrect",+ "center_mm": [+ -6.2,+ -7.6625+ ],+ "size_mm": [+ 0.25,+ 1.475+ ],+ "rot": 0.0+ }+ ]+}
tmds442pnpr.glbadded⋯ 1 unchanged line ⋯
tmds442pnpr.kicad_modadded+1110@@ -0,0 +1,1110 @@+(footprint "LQFP-128_14x14mm_P0.4mm"+ (version 20260206)+ (generator "kicad-footprint-generator")+ (layer "F.Cu")+ (descr "LQFP, 128 Pin (JEDEC MS-026 variation BEE, 1.40mm body thickness, https://www.jedec.org/document_search?search_api_views_fulltext=MS-026, https://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=423)")+ (tags "LQFP QFP Microchip_128-Lead-Low-Profile-Plastic-Quad-Flat-Pack-(PT) Renesas_Q128.14x14")+ (property "Reference" "REF**"+ (at 0 -9.35 0)+ (layer "F.SilkS")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "Value" "LQFP-128_14x14mm_P0.4mm"+ (at 0 9.35 0)+ (layer "F.Fab")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "KiLib_Generator" "package/gullwing"+ (at 0 0 0)+ (layer "F.SilkS")+ (hide yes)+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (attr smd)+ (duplicate_pad_numbers_are_jumpers no)+ (fp_line+ (start -7.11 -7.11)+ (end -6.585 -7.11)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start -7.11 -6.585)+ (end -7.11 -7.11)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start -7.11 7.11)+ (end -7.11 6.585)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start -6.585 7.11)+ (end -7.11 7.11)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start 6.585 -7.11)+ (end 7.11 -7.11)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start 7.11 -7.11)+ (end 7.11 -6.585)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start 7.11 6.585)+ (end 7.11 7.11)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start 7.11 7.11)+ (end 6.585 7.11)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_poly+ (pts+ (xy -7.75 -6.59)+ (xy -8.09 -7.06)+ (xy -7.41 -7.06)+ )+ (stroke+ (width 0.12)+ (type solid)+ )+ (fill yes)+ (layer "F.SilkS")+ )+ (fp_line+ (start -8.65 -6.58)+ (end -7.25 -6.58)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -8.65 6.58)+ (end -8.65 -6.58)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -7.25 -7.25)+ (end -6.58 -7.25)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -7.25 -6.58)+ (end -7.25 -7.25)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -7.25 6.58)+ (end -8.65 6.58)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -7.25 7.25)+ (end -7.25 6.58)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -6.58 -8.65)+ (end 6.58 -8.65)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -6.58 -7.25)+ (end -6.58 -8.65)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -6.58 7.25)+ (end -7.25 7.25)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -6.58 8.65)+ (end -6.58 7.25)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 6.58 -8.65)+ (end 6.58 -7.25)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 6.58 -7.25)+ (end 7.25 -7.25)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 6.58 7.25)+ (end 6.58 8.65)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 6.58 8.65)+ (end -6.58 8.65)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 7.25 -7.25)+ (end 7.25 -6.58)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 7.25 -6.58)+ (end 8.65 -6.58)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 7.25 6.58)+ (end 7.25 7.25)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 7.25 7.25)+ (end 6.58 7.25)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 8.65 -6.58)+ (end 8.65 6.58)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 8.65 6.58)+ (end 7.25 6.58)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_poly+ (pts+ (xy -6 -7)+ (xy 7 -7)+ (xy 7 7)+ (xy -7 7)+ (xy -7 -6)+ )+ (stroke+ (width 0.1)+ (type solid)+ )+ (fill no)+ (layer "F.Fab")+ )+ (fp_text user "${REFERENCE}"+ (at 0 0 0)+ (layer "F.Fab")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (pad "1" smd roundrect+ (at -7.6625 -6.2)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "2" smd roundrect+ (at -7.6625 -5.8)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "3" smd roundrect+ (at -7.6625 -5.4)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "4" smd roundrect+ (at -7.6625 -5)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "5" smd roundrect+ (at -7.6625 -4.6)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "6" smd roundrect+ (at -7.6625 -4.2)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "7" smd roundrect+ (at -7.6625 -3.8)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "8" smd roundrect+ (at -7.6625 -3.4)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "9" smd roundrect+ (at -7.6625 -3)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "10" smd roundrect+ (at -7.6625 -2.6)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "11" smd roundrect+ (at -7.6625 -2.2)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "12" smd roundrect+ (at -7.6625 -1.8)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "13" smd roundrect+ (at -7.6625 -1.4)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "14" smd roundrect+ (at -7.6625 -1)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "15" smd roundrect+ (at -7.6625 -0.6)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "16" smd roundrect+ (at -7.6625 -0.2)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "17" smd roundrect+ (at -7.6625 0.2)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "18" smd roundrect+ (at -7.6625 0.6)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "19" smd roundrect+ (at -7.6625 1)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "20" smd roundrect+ (at -7.6625 1.4)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "21" smd roundrect+ (at -7.6625 1.8)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "22" smd roundrect+ (at -7.6625 2.2)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "23" smd roundrect+ (at -7.6625 2.6)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "24" smd roundrect+ (at -7.6625 3)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "25" smd roundrect+ (at -7.6625 3.4)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "26" smd roundrect+ (at -7.6625 3.8)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "27" smd roundrect+ (at -7.6625 4.2)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "28" smd roundrect+ (at -7.6625 4.6)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "29" smd roundrect+ (at -7.6625 5)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "30" smd roundrect+ (at -7.6625 5.4)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "31" smd roundrect+ (at -7.6625 5.8)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "32" smd roundrect+ (at -7.6625 6.2)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "33" smd roundrect+ (at -6.2 7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "34" smd roundrect+ (at -5.8 7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "35" smd roundrect+ (at -5.4 7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "36" smd roundrect+ (at -5 7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "37" smd roundrect+ (at -4.6 7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "38" smd roundrect+ (at -4.2 7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "39" smd roundrect+ (at -3.8 7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "40" smd roundrect+ (at -3.4 7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "41" smd roundrect+ (at -3 7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "42" smd roundrect+ (at -2.6 7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "43" smd roundrect+ (at -2.2 7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "44" smd roundrect+ (at -1.8 7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "45" smd roundrect+ (at -1.4 7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "46" smd roundrect+ (at -1 7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "47" smd roundrect+ (at -0.6 7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "48" smd roundrect+ (at -0.2 7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "49" smd roundrect+ (at 0.2 7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "50" smd roundrect+ (at 0.6 7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "51" smd roundrect+ (at 1 7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "52" smd roundrect+ (at 1.4 7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "53" smd roundrect+ (at 1.8 7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "54" smd roundrect+ (at 2.2 7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "55" smd roundrect+ (at 2.6 7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "56" smd roundrect+ (at 3 7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "57" smd roundrect+ (at 3.4 7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "58" smd roundrect+ (at 3.8 7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "59" smd roundrect+ (at 4.2 7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "60" smd roundrect+ (at 4.6 7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "61" smd roundrect+ (at 5 7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "62" smd roundrect+ (at 5.4 7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "63" smd roundrect+ (at 5.8 7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "64" smd roundrect+ (at 6.2 7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "65" smd roundrect+ (at 7.6625 6.2)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "66" smd roundrect+ (at 7.6625 5.8)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "67" smd roundrect+ (at 7.6625 5.4)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "68" smd roundrect+ (at 7.6625 5)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "69" smd roundrect+ (at 7.6625 4.6)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "70" smd roundrect+ (at 7.6625 4.2)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "71" smd roundrect+ (at 7.6625 3.8)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "72" smd roundrect+ (at 7.6625 3.4)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "73" smd roundrect+ (at 7.6625 3)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "74" smd roundrect+ (at 7.6625 2.6)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "75" smd roundrect+ (at 7.6625 2.2)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "76" smd roundrect+ (at 7.6625 1.8)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "77" smd roundrect+ (at 7.6625 1.4)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "78" smd roundrect+ (at 7.6625 1)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "79" smd roundrect+ (at 7.6625 0.6)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "80" smd roundrect+ (at 7.6625 0.2)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "81" smd roundrect+ (at 7.6625 -0.2)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "82" smd roundrect+ (at 7.6625 -0.6)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "83" smd roundrect+ (at 7.6625 -1)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "84" smd roundrect+ (at 7.6625 -1.4)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "85" smd roundrect+ (at 7.6625 -1.8)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "86" smd roundrect+ (at 7.6625 -2.2)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "87" smd roundrect+ (at 7.6625 -2.6)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "88" smd roundrect+ (at 7.6625 -3)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "89" smd roundrect+ (at 7.6625 -3.4)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "90" smd roundrect+ (at 7.6625 -3.8)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "91" smd roundrect+ (at 7.6625 -4.2)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "92" smd roundrect+ (at 7.6625 -4.6)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "93" smd roundrect+ (at 7.6625 -5)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "94" smd roundrect+ (at 7.6625 -5.4)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "95" smd roundrect+ (at 7.6625 -5.8)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "96" smd roundrect+ (at 7.6625 -6.2)+ (size 1.475 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "97" smd roundrect+ (at 6.2 -7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "98" smd roundrect+ (at 5.8 -7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "99" smd roundrect+ (at 5.4 -7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "100" smd roundrect+ (at 5 -7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "101" smd roundrect+ (at 4.6 -7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "102" smd roundrect+ (at 4.2 -7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "103" smd roundrect+ (at 3.8 -7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "104" smd roundrect+ (at 3.4 -7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "105" smd roundrect+ (at 3 -7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "106" smd roundrect+ (at 2.6 -7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "107" smd roundrect+ (at 2.2 -7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "108" smd roundrect+ (at 1.8 -7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "109" smd roundrect+ (at 1.4 -7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "110" smd roundrect+ (at 1 -7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "111" smd roundrect+ (at 0.6 -7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "112" smd roundrect+ (at 0.2 -7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "113" smd roundrect+ (at -0.2 -7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "114" smd roundrect+ (at -0.6 -7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "115" smd roundrect+ (at -1 -7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "116" smd roundrect+ (at -1.4 -7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "117" smd roundrect+ (at -1.8 -7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "118" smd roundrect+ (at -2.2 -7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "119" smd roundrect+ (at -2.6 -7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "120" smd roundrect+ (at -3 -7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "121" smd roundrect+ (at -3.4 -7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "122" smd roundrect+ (at -3.8 -7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "123" smd roundrect+ (at -4.2 -7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "124" smd roundrect+ (at -4.6 -7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "125" smd roundrect+ (at -5 -7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "126" smd roundrect+ (at -5.4 -7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "127" smd roundrect+ (at -5.8 -7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "128" smd roundrect+ (at -6.2 -7.6625)+ (size 0.25 1.475)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (embedded_fonts no)+ (model "${KICAD10_3DMODEL_DIR}/Package_QFP.3dshapes/LQFP-128_14x14mm_P0.4mm.step"+ (offset+ (xyz 0 0 0)+ )+ (scale+ (xyz 1 1 1)+ )+ (rotate+ (xyz 0 0 0)+ )+ )+)
tmds442pnpr.kicad_symadded+525@@ -0,0 +1,525 @@+(kicad_symbol_lib (version 20211014) (generator ds2sf_rect)+ (symbol "TMDS442PNPR" (in_bom yes) (on_board yes)+ (property "Reference" "U" (at 0 83.82 0) (effects (font (size 1.27 1.27))))+ (property "Value" "TMDS442PNPR" (at 0 -86.36 0) (effects (font (size 1.27 1.27))))+ (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) hide))+ (symbol "TMDS442PNPR_0_1"+ (rectangle (start -12.70 81.28) (end 12.70 -83.82)+ (stroke (width 0.254) (type default)) (fill (type background)))+ )+ (symbol "TMDS442PNPR_1_1"+ (pin power_in line (at -17.78 78.74 0) (length 5.08)+ (name "Vcc" (effects (font (size 1.27 1.27))))+ (number "1" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 76.20 0) (length 5.08)+ (name "HPD1" (effects (font (size 1.27 1.27))))+ (number "2" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at -17.78 73.66 0) (length 5.08)+ (name "5V_PWR1" (effects (font (size 1.27 1.27))))+ (number "3" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at -17.78 71.12 0) (length 5.08)+ (name "SDA1" (effects (font (size 1.27 1.27))))+ (number "4" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at -17.78 68.58 0) (length 5.08)+ (name "SCL1" (effects (font (size 1.27 1.27))))+ (number "5" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 66.04 0) (length 5.08)+ (name "GND" (effects (font (size 1.27 1.27))))+ (number "6" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at -17.78 63.50 0) (length 5.08)+ (name "B11" (effects (font (size 1.27 1.27))))+ (number "7" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at -17.78 60.96 0) (length 5.08)+ (name "A11" (effects (font (size 1.27 1.27))))+ (number "8" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 58.42 0) (length 5.08)+ (name "Vcc" (effects (font (size 1.27 1.27))))+ (number "9" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at -17.78 55.88 0) (length 5.08)+ (name "B12" (effects (font (size 1.27 1.27))))+ (number "10" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at -17.78 53.34 0) (length 5.08)+ (name "A12" (effects (font (size 1.27 1.27))))+ (number "11" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 50.80 0) (length 5.08)+ (name "GND" (effects (font (size 1.27 1.27))))+ (number "12" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at -17.78 48.26 0) (length 5.08)+ (name "B13" (effects (font (size 1.27 1.27))))+ (number "13" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at -17.78 45.72 0) (length 5.08)+ (name "A13" (effects (font (size 1.27 1.27))))+ (number "14" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 43.18 0) (length 5.08)+ (name "Vcc" (effects (font (size 1.27 1.27))))+ (number "15" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at -17.78 40.64 0) (length 5.08)+ (name "B14" (effects (font (size 1.27 1.27))))+ (number "16" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at -17.78 38.10 0) (length 5.08)+ (name "A14" (effects (font (size 1.27 1.27))))+ (number "17" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 35.56 0) (length 5.08)+ (name "GND" (effects (font (size 1.27 1.27))))+ (number "18" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 33.02 0) (length 5.08)+ (name "Vcc" (effects (font (size 1.27 1.27))))+ (number "19" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at -17.78 30.48 0) (length 5.08)+ (name "GPIO0 (SA1)" (effects (font (size 1.27 1.27))))+ (number "20" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at -17.78 27.94 0) (length 5.08)+ (name "GPIO1 (SB1)" (effects (font (size 1.27 1.27))))+ (number "21" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at -17.78 25.40 0) (length 5.08)+ (name "GPIO2 (/OE1)" (effects (font (size 1.27 1.27))))+ (number "22" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at -17.78 22.86 0) (length 5.08)+ (name "GPIO3 (I2CEN1)" (effects (font (size 1.27 1.27))))+ (number "23" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at -17.78 20.32 0) (length 5.08)+ (name "GPIO4 (PRE1)" (effects (font (size 1.27 1.27))))+ (number "24" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at -17.78 17.78 0) (length 5.08)+ (name "GPIO5 (SA2)" (effects (font (size 1.27 1.27))))+ (number "25" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at -17.78 15.24 0) (length 5.08)+ (name "GPIO6 (SB2)" (effects (font (size 1.27 1.27))))+ (number "26" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at -17.78 12.70 0) (length 5.08)+ (name "GPIO7 (/OE2)" (effects (font (size 1.27 1.27))))+ (number "27" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at -17.78 10.16 0) (length 5.08)+ (name "GPIO8 (I2CEN2)" (effects (font (size 1.27 1.27))))+ (number "28" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at -17.78 7.62 0) (length 5.08)+ (name "GPIO9 (PRE2)" (effects (font (size 1.27 1.27))))+ (number "29" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at -17.78 5.08 0) (length 5.08)+ (name "GPIO10 (SP)" (effects (font (size 1.27 1.27))))+ (number "30" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at -17.78 2.54 0) (length 5.08)+ (name "GE" (effects (font (size 1.27 1.27))))+ (number "31" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at -17.78 0.00 0) (length 5.08)+ (name "OVS" (effects (font (size 1.27 1.27))))+ (number "32" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 -2.54 0) (length 5.08)+ (name "GND" (effects (font (size 1.27 1.27))))+ (number "33" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 -5.08 0) (length 5.08)+ (name "Y24" (effects (font (size 1.27 1.27))))+ (number "34" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 -7.62 0) (length 5.08)+ (name "Z24" (effects (font (size 1.27 1.27))))+ (number "35" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 -10.16 0) (length 5.08)+ (name "Vcc" (effects (font (size 1.27 1.27))))+ (number "36" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 -12.70 0) (length 5.08)+ (name "Y23" (effects (font (size 1.27 1.27))))+ (number "37" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 -15.24 0) (length 5.08)+ (name "Z23" (effects (font (size 1.27 1.27))))+ (number "38" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 -17.78 0) (length 5.08)+ (name "GND" (effects (font (size 1.27 1.27))))+ (number "39" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 -20.32 0) (length 5.08)+ (name "Y22" (effects (font (size 1.27 1.27))))+ (number "40" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 -22.86 0) (length 5.08)+ (name "Z22" (effects (font (size 1.27 1.27))))+ (number "41" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 -25.40 0) (length 5.08)+ (name "Vcc" (effects (font (size 1.27 1.27))))+ (number "42" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 -27.94 0) (length 5.08)+ (name "Y21" (effects (font (size 1.27 1.27))))+ (number "43" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 -30.48 0) (length 5.08)+ (name "Z21" (effects (font (size 1.27 1.27))))+ (number "44" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 -33.02 0) (length 5.08)+ (name "GND" (effects (font (size 1.27 1.27))))+ (number "45" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at -17.78 -35.56 0) (length 5.08)+ (name "SCL_SINK2" (effects (font (size 1.27 1.27))))+ (number "46" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at -17.78 -38.10 0) (length 5.08)+ (name "SDA_SINK2" (effects (font (size 1.27 1.27))))+ (number "47" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 -40.64 0) (length 5.08)+ (name "5V_SINK2" (effects (font (size 1.27 1.27))))+ (number "48" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at -17.78 -43.18 0) (length 5.08)+ (name "HPD_SINK2" (effects (font (size 1.27 1.27))))+ (number "49" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 -45.72 0) (length 5.08)+ (name "Vcc" (effects (font (size 1.27 1.27))))+ (number "50" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at -17.78 -48.26 0) (length 5.08)+ (name "VSADJ" (effects (font (size 1.27 1.27))))+ (number "51" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 -50.80 0) (length 5.08)+ (name "GND" (effects (font (size 1.27 1.27))))+ (number "52" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 -53.34 0) (length 5.08)+ (name "Y14" (effects (font (size 1.27 1.27))))+ (number "53" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 -55.88 0) (length 5.08)+ (name "Z14" (effects (font (size 1.27 1.27))))+ (number "54" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 -58.42 0) (length 5.08)+ (name "Vcc" (effects (font (size 1.27 1.27))))+ (number "55" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 -60.96 0) (length 5.08)+ (name "Y13" (effects (font (size 1.27 1.27))))+ (number "56" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 -63.50 0) (length 5.08)+ (name "Z13" (effects (font (size 1.27 1.27))))+ (number "57" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 -66.04 0) (length 5.08)+ (name "GND" (effects (font (size 1.27 1.27))))+ (number "58" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 -68.58 0) (length 5.08)+ (name "Y12" (effects (font (size 1.27 1.27))))+ (number "59" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 -71.12 0) (length 5.08)+ (name "Z12" (effects (font (size 1.27 1.27))))+ (number "60" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 -73.66 0) (length 5.08)+ (name "Vcc" (effects (font (size 1.27 1.27))))+ (number "61" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 -76.20 0) (length 5.08)+ (name "Y11" (effects (font (size 1.27 1.27))))+ (number "62" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 -78.74 0) (length 5.08)+ (name "Z11" (effects (font (size 1.27 1.27))))+ (number "63" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 -81.28 0) (length 5.08)+ (name "GND" (effects (font (size 1.27 1.27))))+ (number "64" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 78.74 180) (length 5.08)+ (name "GND" (effects (font (size 1.27 1.27))))+ (number "128" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 76.20 180) (length 5.08)+ (name "A24" (effects (font (size 1.27 1.27))))+ (number "127" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 73.66 180) (length 5.08)+ (name "B24" (effects (font (size 1.27 1.27))))+ (number "126" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 71.12 180) (length 5.08)+ (name "Vcc" (effects (font (size 1.27 1.27))))+ (number "125" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 68.58 180) (length 5.08)+ (name "A23" (effects (font (size 1.27 1.27))))+ (number "124" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 66.04 180) (length 5.08)+ (name "B23" (effects (font (size 1.27 1.27))))+ (number "123" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 63.50 180) (length 5.08)+ (name "GND" (effects (font (size 1.27 1.27))))+ (number "122" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 60.96 180) (length 5.08)+ (name "A22" (effects (font (size 1.27 1.27))))+ (number "121" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 58.42 180) (length 5.08)+ (name "B22" (effects (font (size 1.27 1.27))))+ (number "120" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 55.88 180) (length 5.08)+ (name "Vcc" (effects (font (size 1.27 1.27))))+ (number "119" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 53.34 180) (length 5.08)+ (name "A21" (effects (font (size 1.27 1.27))))+ (number "118" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 50.80 180) (length 5.08)+ (name "B21" (effects (font (size 1.27 1.27))))+ (number "117" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 48.26 180) (length 5.08)+ (name "GND" (effects (font (size 1.27 1.27))))+ (number "116" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at 17.78 45.72 180) (length 5.08)+ (name "SCL2" (effects (font (size 1.27 1.27))))+ (number "115" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at 17.78 43.18 180) (length 5.08)+ (name "SDA2" (effects (font (size 1.27 1.27))))+ (number "114" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 40.64 180) (length 5.08)+ (name "5V_PWR2" (effects (font (size 1.27 1.27))))+ (number "113" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at 17.78 38.10 180) (length 5.08)+ (name "HPD2" (effects (font (size 1.27 1.27))))+ (number "112" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 35.56 180) (length 5.08)+ (name "Vcc" (effects (font (size 1.27 1.27))))+ (number "111" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 33.02 180) (length 5.08)+ (name "GND" (effects (font (size 1.27 1.27))))+ (number "110" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 30.48 180) (length 5.08)+ (name "A34" (effects (font (size 1.27 1.27))))+ (number "109" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 27.94 180) (length 5.08)+ (name "B34" (effects (font (size 1.27 1.27))))+ (number "108" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 25.40 180) (length 5.08)+ (name "Vcc" (effects (font (size 1.27 1.27))))+ (number "107" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 22.86 180) (length 5.08)+ (name "A33" (effects (font (size 1.27 1.27))))+ (number "106" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 20.32 180) (length 5.08)+ (name "B33" (effects (font (size 1.27 1.27))))+ (number "105" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 17.78 180) (length 5.08)+ (name "GND" (effects (font (size 1.27 1.27))))+ (number "104" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 15.24 180) (length 5.08)+ (name "A32" (effects (font (size 1.27 1.27))))+ (number "103" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 12.70 180) (length 5.08)+ (name "B32" (effects (font (size 1.27 1.27))))+ (number "102" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 10.16 180) (length 5.08)+ (name "Vcc" (effects (font (size 1.27 1.27))))+ (number "101" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 7.62 180) (length 5.08)+ (name "A31" (effects (font (size 1.27 1.27))))+ (number "100" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 5.08 180) (length 5.08)+ (name "B31" (effects (font (size 1.27 1.27))))+ (number "99" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 2.54 180) (length 5.08)+ (name "GND" (effects (font (size 1.27 1.27))))+ (number "98" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at 17.78 0.00 180) (length 5.08)+ (name "SCL3" (effects (font (size 1.27 1.27))))+ (number "97" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at 17.78 -2.54 180) (length 5.08)+ (name "SDA3" (effects (font (size 1.27 1.27))))+ (number "96" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 -5.08 180) (length 5.08)+ (name "5V_PWR3" (effects (font (size 1.27 1.27))))+ (number "95" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at 17.78 -7.62 180) (length 5.08)+ (name "HPD3" (effects (font (size 1.27 1.27))))+ (number "94" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 -10.16 180) (length 5.08)+ (name "Vcc" (effects (font (size 1.27 1.27))))+ (number "93" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 -12.70 180) (length 5.08)+ (name "GND" (effects (font (size 1.27 1.27))))+ (number "92" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 -15.24 180) (length 5.08)+ (name "A44" (effects (font (size 1.27 1.27))))+ (number "91" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 -17.78 180) (length 5.08)+ (name "B44" (effects (font (size 1.27 1.27))))+ (number "90" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 -20.32 180) (length 5.08)+ (name "Vcc" (effects (font (size 1.27 1.27))))+ (number "89" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 -22.86 180) (length 5.08)+ (name "A43" (effects (font (size 1.27 1.27))))+ (number "88" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 -25.40 180) (length 5.08)+ (name "B43" (effects (font (size 1.27 1.27))))+ (number "87" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 -27.94 180) (length 5.08)+ (name "GND" (effects (font (size 1.27 1.27))))+ (number "86" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 -30.48 180) (length 5.08)+ (name "A42" (effects (font (size 1.27 1.27))))+ (number "85" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 -33.02 180) (length 5.08)+ (name "B42" (effects (font (size 1.27 1.27))))+ (number "84" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 -35.56 180) (length 5.08)+ (name "Vcc" (effects (font (size 1.27 1.27))))+ (number "83" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 -38.10 180) (length 5.08)+ (name "A41" (effects (font (size 1.27 1.27))))+ (number "82" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 -40.64 180) (length 5.08)+ (name "B41" (effects (font (size 1.27 1.27))))+ (number "81" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 -43.18 180) (length 5.08)+ (name "GND" (effects (font (size 1.27 1.27))))+ (number "80" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at 17.78 -45.72 180) (length 5.08)+ (name "SCL4" (effects (font (size 1.27 1.27))))+ (number "79" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at 17.78 -48.26 180) (length 5.08)+ (name "SDA4" (effects (font (size 1.27 1.27))))+ (number "78" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 -50.80 180) (length 5.08)+ (name "5V_PWR4" (effects (font (size 1.27 1.27))))+ (number "77" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at 17.78 -53.34 180) (length 5.08)+ (name "HPD4" (effects (font (size 1.27 1.27))))+ (number "76" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 -55.88 180) (length 5.08)+ (name "Vcc" (effects (font (size 1.27 1.27))))+ (number "75" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at 17.78 -58.42 180) (length 5.08)+ (name "LC_SCL" (effects (font (size 1.27 1.27))))+ (number "74" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at 17.78 -60.96 180) (length 5.08)+ (name "LC_SDA" (effects (font (size 1.27 1.27))))+ (number "73" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 -63.50 180) (length 5.08)+ (name "LC_A0" (effects (font (size 1.27 1.27))))+ (number "72" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 -66.04 180) (length 5.08)+ (name "LC_A1" (effects (font (size 1.27 1.27))))+ (number "71" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 -68.58 180) (length 5.08)+ (name "GND" (effects (font (size 1.27 1.27))))+ (number "70" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 -71.12 180) (length 5.08)+ (name "Vcc" (effects (font (size 1.27 1.27))))+ (number "69" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 -73.66 180) (length 5.08)+ (name "HPD_SINK1" (effects (font (size 1.27 1.27))))+ (number "68" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at 17.78 -76.20 180) (length 5.08)+ (name "5V_SINK1" (effects (font (size 1.27 1.27))))+ (number "67" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at 17.78 -78.74 180) (length 5.08)+ (name "SDA_SINK1" (effects (font (size 1.27 1.27))))+ (number "66" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at 17.78 -81.28 180) (length 5.08)+ (name "SCL_SINK1" (effects (font (size 1.27 1.27))))+ (number "65" (effects (font (size 1.27 1.27))))+ )+ )+ )+)
tmds442pnpr.lbradded+492@@ -0,0 +1,492 @@+<?xml version="1.0" encoding="utf-8"?>+<!DOCTYPE eagle SYSTEM "eagle.dtd">+<eagle version="9.6.2">+<drawing>+<settings><setting alwaysvectorfont="no"/></settings>+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>+<layers>+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>+<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>+<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>+</layers>+<library>+<description></description>+<packages>+<package name="LQFP-128_14x14mm_P0.4mm">+ <description>LQFP-128, 14 x 14 mm, 0.4 mm pitch</description>+ <smd name="1" x="-7.6625" y="6.2000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="2" x="-7.6625" y="5.8000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="3" x="-7.6625" y="5.4000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="4" x="-7.6625" y="5.0000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="5" x="-7.6625" y="4.6000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="6" x="-7.6625" y="4.2000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="7" x="-7.6625" y="3.8000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="8" x="-7.6625" y="3.4000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="9" x="-7.6625" y="3.0000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="10" x="-7.6625" y="2.6000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="11" x="-7.6625" y="2.2000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="12" x="-7.6625" y="1.8000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="13" x="-7.6625" y="1.4000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="14" x="-7.6625" y="1.0000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="15" x="-7.6625" y="0.6000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="16" x="-7.6625" y="0.2000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="17" x="-7.6625" y="-0.2000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="18" x="-7.6625" y="-0.6000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="19" x="-7.6625" y="-1.0000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="20" x="-7.6625" y="-1.4000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="21" x="-7.6625" y="-1.8000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="22" x="-7.6625" y="-2.2000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="23" x="-7.6625" y="-2.6000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="24" x="-7.6625" y="-3.0000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="25" x="-7.6625" y="-3.4000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="26" x="-7.6625" y="-3.8000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="27" x="-7.6625" y="-4.2000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="28" x="-7.6625" y="-4.6000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="29" x="-7.6625" y="-5.0000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="30" x="-7.6625" y="-5.4000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="31" x="-7.6625" y="-5.8000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="32" x="-7.6625" y="-6.2000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="33" x="-6.2000" y="-7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="34" x="-5.8000" y="-7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="35" x="-5.4000" y="-7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="36" x="-5.0000" y="-7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="37" x="-4.6000" y="-7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="38" x="-4.2000" y="-7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="39" x="-3.8000" y="-7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="40" x="-3.4000" y="-7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="41" x="-3.0000" y="-7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="42" x="-2.6000" y="-7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="43" x="-2.2000" y="-7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="44" x="-1.8000" y="-7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="45" x="-1.4000" y="-7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="46" x="-1.0000" y="-7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="47" x="-0.6000" y="-7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="48" x="-0.2000" y="-7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="49" x="0.2000" y="-7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="50" x="0.6000" y="-7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="51" x="1.0000" y="-7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="52" x="1.4000" y="-7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="53" x="1.8000" y="-7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="54" x="2.2000" y="-7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="55" x="2.6000" y="-7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="56" x="3.0000" y="-7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="57" x="3.4000" y="-7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="58" x="3.8000" y="-7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="59" x="4.2000" y="-7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="60" x="4.6000" y="-7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="61" x="5.0000" y="-7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="62" x="5.4000" y="-7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="63" x="5.8000" y="-7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="64" x="6.2000" y="-7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="65" x="7.6625" y="-6.2000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="66" x="7.6625" y="-5.8000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="67" x="7.6625" y="-5.4000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="68" x="7.6625" y="-5.0000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="69" x="7.6625" y="-4.6000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="70" x="7.6625" y="-4.2000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="71" x="7.6625" y="-3.8000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="72" x="7.6625" y="-3.4000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="73" x="7.6625" y="-3.0000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="74" x="7.6625" y="-2.6000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="75" x="7.6625" y="-2.2000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="76" x="7.6625" y="-1.8000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="77" x="7.6625" y="-1.4000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="78" x="7.6625" y="-1.0000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="79" x="7.6625" y="-0.6000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="80" x="7.6625" y="-0.2000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="81" x="7.6625" y="0.2000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="82" x="7.6625" y="0.6000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="83" x="7.6625" y="1.0000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="84" x="7.6625" y="1.4000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="85" x="7.6625" y="1.8000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="86" x="7.6625" y="2.2000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="87" x="7.6625" y="2.6000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="88" x="7.6625" y="3.0000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="89" x="7.6625" y="3.4000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="90" x="7.6625" y="3.8000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="91" x="7.6625" y="4.2000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="92" x="7.6625" y="4.6000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="93" x="7.6625" y="5.0000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="94" x="7.6625" y="5.4000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="95" x="7.6625" y="5.8000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="96" x="7.6625" y="6.2000" dx="1.4750" dy="0.2500" layer="1" roundness="50"/>+ <smd name="97" x="6.2000" y="7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="98" x="5.8000" y="7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="99" x="5.4000" y="7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="100" x="5.0000" y="7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="101" x="4.6000" y="7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="102" x="4.2000" y="7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="103" x="3.8000" y="7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="104" x="3.4000" y="7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="105" x="3.0000" y="7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="106" x="2.6000" y="7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="107" x="2.2000" y="7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="108" x="1.8000" y="7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="109" x="1.4000" y="7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="110" x="1.0000" y="7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="111" x="0.6000" y="7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="112" x="0.2000" y="7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="113" x="-0.2000" y="7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="114" x="-0.6000" y="7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="115" x="-1.0000" y="7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="116" x="-1.4000" y="7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="117" x="-1.8000" y="7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="118" x="-2.2000" y="7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="119" x="-2.6000" y="7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="120" x="-3.0000" y="7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="121" x="-3.4000" y="7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="122" x="-3.8000" y="7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="123" x="-4.2000" y="7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="124" x="-4.6000" y="7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="125" x="-5.0000" y="7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="126" x="-5.4000" y="7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="127" x="-5.8000" y="7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <smd name="128" x="-6.2000" y="7.6625" dx="0.2500" dy="1.4750" layer="1" roundness="50"/>+ <polygon width="0.1200" layer="21">+ <vertex x="-7.7500" y="6.5900"/>+ <vertex x="-8.0900" y="7.0600"/>+ <vertex x="-7.4100" y="7.0600"/>+ </polygon>+ <polygon width="0.1000" layer="51">+ <vertex x="-6.0000" y="7.0000"/>+ <vertex x="7.0000" y="7.0000"/>+ <vertex x="7.0000" y="-7.0000"/>+ <vertex x="-7.0000" y="-7.0000"/>+ <vertex x="-7.0000" y="6.0000"/>+ </polygon>+ <wire x1="-7.1100" y1="7.1100" x2="-6.5850" y2="7.1100" width="0.1200" layer="21"/>+ <wire x1="-7.1100" y1="6.5850" x2="-7.1100" y2="7.1100" width="0.1200" layer="21"/>+ <wire x1="-7.1100" y1="-7.1100" x2="-7.1100" y2="-6.5850" width="0.1200" layer="21"/>+ <wire x1="-6.5850" y1="-7.1100" x2="-7.1100" y2="-7.1100" width="0.1200" layer="21"/>+ <wire x1="6.5850" y1="7.1100" x2="7.1100" y2="7.1100" width="0.1200" layer="21"/>+ <wire x1="7.1100" y1="7.1100" x2="7.1100" y2="6.5850" width="0.1200" layer="21"/>+ <wire x1="7.1100" y1="-6.5850" x2="7.1100" y2="-7.1100" width="0.1200" layer="21"/>+ <wire x1="7.1100" y1="-7.1100" x2="6.5850" y2="-7.1100" width="0.1200" layer="21"/>+ <text x="0" y="9.000" size="1.27" layer="25" align="bottom-center">>NAME</text>+ <text x="0" y="-9.000" size="1.27" layer="27" align="top-center">>VALUE</text>+</package>+</packages>+<symbols>+<symbol name="TMDS442PNPR">+ <wire x1="-12.7" y1="81.28" x2="12.7" y2="81.28" width="0.254" layer="94"/>+ <wire x1="12.7" y1="81.28" x2="12.7" y2="-83.82" width="0.254" layer="94"/>+ <wire x1="12.7" y1="-83.82" x2="-12.7" y2="-83.82" width="0.254" layer="94"/>+ <wire x1="-12.7" y1="-83.82" x2="-12.7" y2="81.28" width="0.254" layer="94"/>+ <text x="0.0000" y="83.8200" size="1.27" layer="95" align="center">>NAME</text>+ <text x="0.0000" y="-86.3600" size="1.27" layer="96" align="center">>VALUE</text>+ <pin name="Vcc" x="-17.78" y="78.74" length="middle" direction="pwr"/>+ <pin name="HPD1" x="-17.78" y="76.2" length="middle" direction="out"/>+ <pin name="5V_PWR1" x="-17.78" y="73.66" length="middle" direction="in"/>+ <pin name="SDA1" x="-17.78" y="71.12" length="middle" direction="io"/>+ <pin name="SCL1" x="-17.78" y="68.58" length="middle" direction="io"/>+ <pin name="GND" x="-17.78" y="66.04" length="middle" direction="pwr"/>+ <pin name="B11" x="-17.78" y="63.5" length="middle" direction="in"/>+ <pin name="A11" x="-17.78" y="60.96" length="middle" direction="in"/>+ <pin name="Vcc@2" x="-17.78" y="58.42" length="middle" direction="pwr"/>+ <pin name="B12" x="-17.78" y="55.88" length="middle" direction="in"/>+ <pin name="A12" x="-17.78" y="53.34" length="middle" direction="in"/>+ <pin name="GND@2" x="-17.78" y="50.8" length="middle" direction="pwr"/>+ <pin name="B13" x="-17.78" y="48.26" length="middle" direction="in"/>+ <pin name="A13" x="-17.78" y="45.72" length="middle" direction="in"/>+ <pin name="Vcc@3" x="-17.78" y="43.18" length="middle" direction="pwr"/>+ <pin name="B14" x="-17.78" y="40.64" length="middle" direction="in"/>+ <pin name="A14" x="-17.78" y="38.1" length="middle" direction="in"/>+ <pin name="GND@3" x="-17.78" y="35.56" length="middle" direction="pwr"/>+ <pin name="Vcc@4" x="-17.78" y="33.02" length="middle" direction="pwr"/>+ <pin name="GPIO0_SA1" x="-17.78" y="30.48" length="middle" direction="io"/>+ <pin name="GPIO1_SB1" x="-17.78" y="27.94" length="middle" direction="io"/>+ <pin name="GPIO2_/OE1" x="-17.78" y="25.4" length="middle" direction="io"/>+ <pin name="GPIO3_I2CEN1" x="-17.78" y="22.86" length="middle" direction="io"/>+ <pin name="GPIO4_PRE1" x="-17.78" y="20.32" length="middle" direction="io"/>+ <pin name="GPIO5_SA2" x="-17.78" y="17.78" length="middle" direction="io"/>+ <pin name="GPIO6_SB2" x="-17.78" y="15.24" length="middle" direction="io"/>+ <pin name="GPIO7_/OE2" x="-17.78" y="12.7" length="middle" direction="io"/>+ <pin name="GPIO8_I2CEN2" x="-17.78" y="10.16" length="middle" direction="io"/>+ <pin name="GPIO9_PRE2" x="-17.78" y="7.62" length="middle" direction="io"/>+ <pin name="GPIO10_SP" x="-17.78" y="5.08" length="middle" direction="io"/>+ <pin name="GE" x="-17.78" y="2.54" length="middle" direction="in"/>+ <pin name="OVS" x="-17.78" y="0" length="middle" direction="io"/>+ <pin name="GND@4" x="-17.78" y="-2.54" length="middle" direction="pwr"/>+ <pin name="Y24" x="-17.78" y="-5.08" length="middle" direction="out"/>+ <pin name="Z24" x="-17.78" y="-7.62" length="middle" direction="out"/>+ <pin name="Vcc@5" x="-17.78" y="-10.16" length="middle" direction="pwr"/>+ <pin name="Y23" x="-17.78" y="-12.7" length="middle" direction="out"/>+ <pin name="Z23" x="-17.78" y="-15.24" length="middle" direction="out"/>+ <pin name="GND@5" x="-17.78" y="-17.78" length="middle" direction="pwr"/>+ <pin name="Y22" x="-17.78" y="-20.32" length="middle" direction="out"/>+ <pin name="Z22" x="-17.78" y="-22.86" length="middle" direction="out"/>+ <pin name="Vcc@6" x="-17.78" y="-25.4" length="middle" direction="pwr"/>+ <pin name="Y21" x="-17.78" y="-27.94" length="middle" direction="out"/>+ <pin name="Z21" x="-17.78" y="-30.48" length="middle" direction="out"/>+ <pin name="GND@6" x="-17.78" y="-33.02" length="middle" direction="pwr"/>+ <pin name="SCL_SINK2" x="-17.78" y="-35.56" length="middle" direction="io"/>+ <pin name="SDA_SINK2" x="-17.78" y="-38.1" length="middle" direction="io"/>+ <pin name="5V_SINK2" x="-17.78" y="-40.64" length="middle" direction="out"/>+ <pin name="HPD_SINK2" x="-17.78" y="-43.18" length="middle" direction="in"/>+ <pin name="Vcc@7" x="-17.78" y="-45.72" length="middle" direction="pwr"/>+ <pin name="VSADJ" x="-17.78" y="-48.26" length="middle" direction="in"/>+ <pin name="GND@7" x="-17.78" y="-50.8" length="middle" direction="pwr"/>+ <pin name="Y14" x="-17.78" y="-53.34" length="middle" direction="out"/>+ <pin name="Z14" x="-17.78" y="-55.88" length="middle" direction="out"/>+ <pin name="Vcc@8" x="-17.78" y="-58.42" length="middle" direction="pwr"/>+ <pin name="Y13" x="-17.78" y="-60.96" length="middle" direction="out"/>+ <pin name="Z13" x="-17.78" y="-63.5" length="middle" direction="out"/>+ <pin name="GND@8" x="-17.78" y="-66.04" length="middle" direction="pwr"/>+ <pin name="Y12" x="-17.78" y="-68.58" length="middle" direction="out"/>+ <pin name="Z12" x="-17.78" y="-71.12" length="middle" direction="out"/>+ <pin name="Vcc@9" x="-17.78" y="-73.66" length="middle" direction="pwr"/>+ <pin name="Y11" x="-17.78" y="-76.2" length="middle" direction="out"/>+ <pin name="Z11" x="-17.78" y="-78.74" length="middle" direction="out"/>+ <pin name="GND@9" x="-17.78" y="-81.28" length="middle" direction="pwr"/>+ <pin name="GND@10" x="17.78" y="78.74" length="middle" direction="pwr" rot="R180"/>+ <pin name="A24" x="17.78" y="76.2" length="middle" direction="in" rot="R180"/>+ <pin name="B24" x="17.78" y="73.66" length="middle" direction="in" rot="R180"/>+ <pin name="Vcc@10" x="17.78" y="71.12" length="middle" direction="pwr" rot="R180"/>+ <pin name="A23" x="17.78" y="68.58" length="middle" direction="in" rot="R180"/>+ <pin name="B23" x="17.78" y="66.04" length="middle" direction="in" rot="R180"/>+ <pin name="GND@11" x="17.78" y="63.5" length="middle" direction="pwr" rot="R180"/>+ <pin name="A22" x="17.78" y="60.96" length="middle" direction="in" rot="R180"/>+ <pin name="B22" x="17.78" y="58.42" length="middle" direction="in" rot="R180"/>+ <pin name="Vcc@11" x="17.78" y="55.88" length="middle" direction="pwr" rot="R180"/>+ <pin name="A21" x="17.78" y="53.34" length="middle" direction="in" rot="R180"/>+ <pin name="B21" x="17.78" y="50.8" length="middle" direction="in" rot="R180"/>+ <pin name="GND@12" x="17.78" y="48.26" length="middle" direction="pwr" rot="R180"/>+ <pin name="SCL2" x="17.78" y="45.72" length="middle" direction="io" rot="R180"/>+ <pin name="SDA2" x="17.78" y="43.18" length="middle" direction="io" rot="R180"/>+ <pin name="5V_PWR2" x="17.78" y="40.64" length="middle" direction="in" rot="R180"/>+ <pin name="HPD2" x="17.78" y="38.1" length="middle" direction="out" rot="R180"/>+ <pin name="Vcc@12" x="17.78" y="35.56" length="middle" direction="pwr" rot="R180"/>+ <pin name="GND@13" x="17.78" y="33.02" length="middle" direction="pwr" rot="R180"/>+ <pin name="A34" x="17.78" y="30.48" length="middle" direction="in" rot="R180"/>+ <pin name="B34" x="17.78" y="27.94" length="middle" direction="in" rot="R180"/>+ <pin name="Vcc@13" x="17.78" y="25.4" length="middle" direction="pwr" rot="R180"/>+ <pin name="A33" x="17.78" y="22.86" length="middle" direction="in" rot="R180"/>+ <pin name="B33" x="17.78" y="20.32" length="middle" direction="in" rot="R180"/>+ <pin name="GND@14" x="17.78" y="17.78" length="middle" direction="pwr" rot="R180"/>+ <pin name="A32" x="17.78" y="15.24" length="middle" direction="in" rot="R180"/>+ <pin name="B32" x="17.78" y="12.7" length="middle" direction="in" rot="R180"/>+ <pin name="Vcc@14" x="17.78" y="10.16" length="middle" direction="pwr" rot="R180"/>+ <pin name="A31" x="17.78" y="7.62" length="middle" direction="in" rot="R180"/>+ <pin name="B31" x="17.78" y="5.08" length="middle" direction="in" rot="R180"/>+ <pin name="GND@15" x="17.78" y="2.54" length="middle" direction="pwr" rot="R180"/>+ <pin name="SCL3" x="17.78" y="0" length="middle" direction="io" rot="R180"/>+ <pin name="SDA3" x="17.78" y="-2.54" length="middle" direction="io" rot="R180"/>+ <pin name="5V_PWR3" x="17.78" y="-5.08" length="middle" direction="in" rot="R180"/>+ <pin name="HPD3" x="17.78" y="-7.62" length="middle" direction="out" rot="R180"/>+ <pin name="Vcc@15" x="17.78" y="-10.16" length="middle" direction="pwr" rot="R180"/>+ <pin name="GND@16" x="17.78" y="-12.7" length="middle" direction="pwr" rot="R180"/>+ <pin name="A44" x="17.78" y="-15.24" length="middle" direction="in" rot="R180"/>+ <pin name="B44" x="17.78" y="-17.78" length="middle" direction="in" rot="R180"/>+ <pin name="Vcc@16" x="17.78" y="-20.32" length="middle" direction="pwr" rot="R180"/>+ <pin name="A43" x="17.78" y="-22.86" length="middle" direction="in" rot="R180"/>+ <pin name="B43" x="17.78" y="-25.4" length="middle" direction="in" rot="R180"/>+ <pin name="GND@17" x="17.78" y="-27.94" length="middle" direction="pwr" rot="R180"/>+ <pin name="A42" x="17.78" y="-30.48" length="middle" direction="in" rot="R180"/>+ <pin name="B42" x="17.78" y="-33.02" length="middle" direction="in" rot="R180"/>+ <pin name="Vcc@17" x="17.78" y="-35.56" length="middle" direction="pwr" rot="R180"/>+ <pin name="A41" x="17.78" y="-38.1" length="middle" direction="in" rot="R180"/>+ <pin name="B41" x="17.78" y="-40.64" length="middle" direction="in" rot="R180"/>+ <pin name="GND@18" x="17.78" y="-43.18" length="middle" direction="pwr" rot="R180"/>+ <pin name="SCL4" x="17.78" y="-45.72" length="middle" direction="io" rot="R180"/>+ <pin name="SDA4" x="17.78" y="-48.26" length="middle" direction="io" rot="R180"/>+ <pin name="5V_PWR4" x="17.78" y="-50.8" length="middle" direction="in" rot="R180"/>+ <pin name="HPD4" x="17.78" y="-53.34" length="middle" direction="out" rot="R180"/>+ <pin name="Vcc@18" x="17.78" y="-55.88" length="middle" direction="pwr" rot="R180"/>+ <pin name="LC_SCL" x="17.78" y="-58.42" length="middle" direction="io" rot="R180"/>+ <pin name="LC_SDA" x="17.78" y="-60.96" length="middle" direction="io" rot="R180"/>+ <pin name="LC_A0" x="17.78" y="-63.5" length="middle" direction="in" rot="R180"/>+ <pin name="LC_A1" x="17.78" y="-66.04" length="middle" direction="in" rot="R180"/>+ <pin name="GND@19" x="17.78" y="-68.58" length="middle" direction="pwr" rot="R180"/>+ <pin name="Vcc@19" x="17.78" y="-71.12" length="middle" direction="pwr" rot="R180"/>+ <pin name="HPD_SINK1" x="17.78" y="-73.66" length="middle" direction="in" rot="R180"/>+ <pin name="5V_SINK1" x="17.78" y="-76.2" length="middle" direction="out" rot="R180"/>+ <pin name="SDA_SINK1" x="17.78" y="-78.74" length="middle" direction="io" rot="R180"/>+ <pin name="SCL_SINK1" x="17.78" y="-81.28" length="middle" direction="io" rot="R180"/>+</symbol>+</symbols>+<devicesets>+<deviceset name="TMDS442PNPR" prefix="U">+ <description></description>+ <gates>+ <gate name="G$1" symbol="TMDS442PNPR" x="0" y="0"/>+ </gates>+ <devices>+ <device name="" package="LQFP-128_14x14mm_P0.4mm">+ <connects>+ <connect gate="G$1" pin="Vcc" pad="1"/>+ <connect gate="G$1" pin="HPD1" pad="2"/>+ <connect gate="G$1" pin="5V_PWR1" pad="3"/>+ <connect gate="G$1" pin="SDA1" pad="4"/>+ <connect gate="G$1" pin="SCL1" pad="5"/>+ <connect gate="G$1" pin="GND" pad="6"/>+ <connect gate="G$1" pin="B11" pad="7"/>+ <connect gate="G$1" pin="A11" pad="8"/>+ <connect gate="G$1" pin="Vcc@2" pad="9"/>+ <connect gate="G$1" pin="B12" pad="10"/>+ <connect gate="G$1" pin="A12" pad="11"/>+ <connect gate="G$1" pin="GND@2" pad="12"/>+ <connect gate="G$1" pin="B13" pad="13"/>+ <connect gate="G$1" pin="A13" pad="14"/>+ <connect gate="G$1" pin="Vcc@3" pad="15"/>+ <connect gate="G$1" pin="B14" pad="16"/>+ <connect gate="G$1" pin="A14" pad="17"/>+ <connect gate="G$1" pin="GND@3" pad="18"/>+ <connect gate="G$1" pin="Vcc@4" pad="19"/>+ <connect gate="G$1" pin="GPIO0_SA1" pad="20"/>+ <connect gate="G$1" pin="GPIO1_SB1" pad="21"/>+ <connect gate="G$1" pin="GPIO2_/OE1" pad="22"/>+ <connect gate="G$1" pin="GPIO3_I2CEN1" pad="23"/>+ <connect gate="G$1" pin="GPIO4_PRE1" pad="24"/>+ <connect gate="G$1" pin="GPIO5_SA2" pad="25"/>+ <connect gate="G$1" pin="GPIO6_SB2" pad="26"/>+ <connect gate="G$1" pin="GPIO7_/OE2" pad="27"/>+ <connect gate="G$1" pin="GPIO8_I2CEN2" pad="28"/>+ <connect gate="G$1" pin="GPIO9_PRE2" pad="29"/>+ <connect gate="G$1" pin="GPIO10_SP" pad="30"/>+ <connect gate="G$1" pin="GE" pad="31"/>+ <connect gate="G$1" pin="OVS" pad="32"/>+ <connect gate="G$1" pin="GND@4" pad="33"/>+ <connect gate="G$1" pin="Y24" pad="34"/>+ <connect gate="G$1" pin="Z24" pad="35"/>+ <connect gate="G$1" pin="Vcc@5" pad="36"/>+ <connect gate="G$1" pin="Y23" pad="37"/>+ <connect gate="G$1" pin="Z23" pad="38"/>+ <connect gate="G$1" pin="GND@5" pad="39"/>+ <connect gate="G$1" pin="Y22" pad="40"/>+ <connect gate="G$1" pin="Z22" pad="41"/>+ <connect gate="G$1" pin="Vcc@6" pad="42"/>+ <connect gate="G$1" pin="Y21" pad="43"/>+ <connect gate="G$1" pin="Z21" pad="44"/>+ <connect gate="G$1" pin="GND@6" pad="45"/>+ <connect gate="G$1" pin="SCL_SINK2" pad="46"/>+ <connect gate="G$1" pin="SDA_SINK2" pad="47"/>+ <connect gate="G$1" pin="5V_SINK2" pad="48"/>+ <connect gate="G$1" pin="HPD_SINK2" pad="49"/>+ <connect gate="G$1" pin="Vcc@7" pad="50"/>+ <connect gate="G$1" pin="VSADJ" pad="51"/>+ <connect gate="G$1" pin="GND@7" pad="52"/>+ <connect gate="G$1" pin="Y14" pad="53"/>+ <connect gate="G$1" pin="Z14" pad="54"/>+ <connect gate="G$1" pin="Vcc@8" pad="55"/>+ <connect gate="G$1" pin="Y13" pad="56"/>+ <connect gate="G$1" pin="Z13" pad="57"/>+ <connect gate="G$1" pin="GND@8" pad="58"/>+ <connect gate="G$1" pin="Y12" pad="59"/>+ <connect gate="G$1" pin="Z12" pad="60"/>+ <connect gate="G$1" pin="Vcc@9" pad="61"/>+ <connect gate="G$1" pin="Y11" pad="62"/>+ <connect gate="G$1" pin="Z11" pad="63"/>+ <connect gate="G$1" pin="GND@9" pad="64"/>+ <connect gate="G$1" pin="GND@10" pad="128"/>+ <connect gate="G$1" pin="A24" pad="127"/>+ <connect gate="G$1" pin="B24" pad="126"/>+ <connect gate="G$1" pin="Vcc@10" pad="125"/>+ <connect gate="G$1" pin="A23" pad="124"/>+ <connect gate="G$1" pin="B23" pad="123"/>+ <connect gate="G$1" pin="GND@11" pad="122"/>+ <connect gate="G$1" pin="A22" pad="121"/>+ <connect gate="G$1" pin="B22" pad="120"/>+ <connect gate="G$1" pin="Vcc@11" pad="119"/>+ <connect gate="G$1" pin="A21" pad="118"/>+ <connect gate="G$1" pin="B21" pad="117"/>+ <connect gate="G$1" pin="GND@12" pad="116"/>+ <connect gate="G$1" pin="SCL2" pad="115"/>+ <connect gate="G$1" pin="SDA2" pad="114"/>+ <connect gate="G$1" pin="5V_PWR2" pad="113"/>+ <connect gate="G$1" pin="HPD2" pad="112"/>+ <connect gate="G$1" pin="Vcc@12" pad="111"/>+ <connect gate="G$1" pin="GND@13" pad="110"/>+ <connect gate="G$1" pin="A34" pad="109"/>+ <connect gate="G$1" pin="B34" pad="108"/>+ <connect gate="G$1" pin="Vcc@13" pad="107"/>+ <connect gate="G$1" pin="A33" pad="106"/>+ <connect gate="G$1" pin="B33" pad="105"/>+ <connect gate="G$1" pin="GND@14" pad="104"/>+ <connect gate="G$1" pin="A32" pad="103"/>+ <connect gate="G$1" pin="B32" pad="102"/>+ <connect gate="G$1" pin="Vcc@14" pad="101"/>+ <connect gate="G$1" pin="A31" pad="100"/>+ <connect gate="G$1" pin="B31" pad="99"/>+ <connect gate="G$1" pin="GND@15" pad="98"/>+ <connect gate="G$1" pin="SCL3" pad="97"/>+ <connect gate="G$1" pin="SDA3" pad="96"/>+ <connect gate="G$1" pin="5V_PWR3" pad="95"/>+ <connect gate="G$1" pin="HPD3" pad="94"/>+ <connect gate="G$1" pin="Vcc@15" pad="93"/>+ <connect gate="G$1" pin="GND@16" pad="92"/>+ <connect gate="G$1" pin="A44" pad="91"/>+ <connect gate="G$1" pin="B44" pad="90"/>+ <connect gate="G$1" pin="Vcc@16" pad="89"/>+ <connect gate="G$1" pin="A43" pad="88"/>+ <connect gate="G$1" pin="B43" pad="87"/>+ <connect gate="G$1" pin="GND@17" pad="86"/>+ <connect gate="G$1" pin="A42" pad="85"/>+ <connect gate="G$1" pin="B42" pad="84"/>+ <connect gate="G$1" pin="Vcc@17" pad="83"/>+ <connect gate="G$1" pin="A41" pad="82"/>+ <connect gate="G$1" pin="B41" pad="81"/>+ <connect gate="G$1" pin="GND@18" pad="80"/>+ <connect gate="G$1" pin="SCL4" pad="79"/>+ <connect gate="G$1" pin="SDA4" pad="78"/>+ <connect gate="G$1" pin="5V_PWR4" pad="77"/>+ <connect gate="G$1" pin="HPD4" pad="76"/>+ <connect gate="G$1" pin="Vcc@18" pad="75"/>+ <connect gate="G$1" pin="LC_SCL" pad="74"/>+ <connect gate="G$1" pin="LC_SDA" pad="73"/>+ <connect gate="G$1" pin="LC_A0" pad="72"/>+ <connect gate="G$1" pin="LC_A1" pad="71"/>+ <connect gate="G$1" pin="GND@19" pad="70"/>+ <connect gate="G$1" pin="Vcc@19" pad="69"/>+ <connect gate="G$1" pin="HPD_SINK1" pad="68"/>+ <connect gate="G$1" pin="5V_SINK1" pad="67"/>+ <connect gate="G$1" pin="SDA_SINK1" pad="66"/>+ <connect gate="G$1" pin="SCL_SINK1" pad="65"/>+ </connects>+ <technologies><technology name=""/></technologies>+ </device>+ </devices>+</deviceset>+</devicesets>+</library>+</drawing>+</eagle>
tmds442pnpr.stepadded+19156@@ -0,0 +1,39307 @@+ISO-10303-21;+HEADER;+/* LQFP-128_14x14mm_P0.4mm.step 3D STEP model for use in ECAD systems+ * Copyright (C) 2025, KiCAD+ *+ * This work is licensed under the+ * [Creative Commons CC-BY-SA 4.0 License](https://creativecommons.org/licenses/by-sa/4.0/legalcode),+ * with the following exception:+ *+ * To the extent that the creation of electronic designs that use 'Licensed Material' can be+ * considered to be 'Adapted Material', then the copyright holder waives article 3 of the license+ * with respect to these designs and any generated files which use data provided as part of the+ * 'Licensed Material'.+ *+ * You are free to use the library data in your own projects without the obligation to share your+ * project files under this or any other license agreement. However, if you wish to distribute+ * these libraries, or parts thereof (including in modified form) as a collection then the exception+ * above does not apply. Please refer to+ * https://gitlab.com/kicad/libraries/kicad-packages3D/-/blob/master/LICENSE.md for further clarification+ * of the exception.+ *+ * Disclaimer of Warranties and Limitation of Liability.+ * These libraries are provided in the hope that they will be useful, but are provided without warranty of any kind, express or implied.+ * USE 3D CAD DATA AT YOUR OWN RISK+ * DO NOT RELY UPON ANY INFORMATION FOUND HERE WITHOUT INDEPENDENT VERIFICATION.+ */++FILE_DESCRIPTION(+/* description */ ('model of LQFP-128_14x14mm_P0.4mm'),+/* implementation_level */ '2;1');++FILE_NAME(+/* name */ 'LQFP-128_14x14mm_P0.4mm.step',+/* time_stamp */ '1970-01-01T00:00:00',+/* author */ ('KiCAD','kicad'),+/* organization */ ('OCCT'),+/* preprocessor_version */ '',+/* originating_system */ 'KiCAD',+/* authorisation */ '');++FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));+ENDSEC;++DATA;+#1=APPLICATION_PROTOCOL_DEFINITION('international standard','automotive_design',2000,#2);+#2=APPLICATION_CONTEXT('core data for automotive mechanical design processes');+#3=SHAPE_DEFINITION_REPRESENTATION(#4,#10);+#4=PRODUCT_DEFINITION_SHAPE('','',#5);+#5=PRODUCT_DEFINITION('design','',#6,#9);+#6=PRODUCT_DEFINITION_FORMATION('','',#7);+#7=PRODUCT('LQFP-128_14x14mm_P0.4mm','LQFP-128_14x14mm_P0.4mm','',(#8));+#8=PRODUCT_CONTEXT('',#2,'mechanical');+#9=PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#10=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#15),#37275);+#11=AXIS2_PLACEMENT_3D('',#12,#13,#14);+#12=CARTESIAN_POINT('',(0.,0.,0.));+#13=DIRECTION('',(0.,0.,1.));+#14=DIRECTION('',(1.,0.,-0.));+#15=MANIFOLD_SOLID_BREP('',#16);+#16=CLOSED_SHELL('',(#17,#306,#332,#386,#440,#465,#478,#500,#513,#535,#548,#570,#583,#605,#618,#640,#653,#675,#688,#710,#723,#745,#758,#780,#793,#815,#828,#850,#863,#885,#898,#920,#933,#955,#968,#990,#1003,#1025,#1038,#1060,#1073,#1095,#1108,#1130,#1143,#1165,#1178,#1200,#1213,#1235,#1248,#1270,#1283,#1305,#1318,#1340,#1353,#1375,#1388,#1410,#1423,#1445,#1458,#1480,#1493,#1515,#1528,#1550,#1583,#1603,#1879,#1911,#1948,#2015,#2034,#2052,#2079,#2351,#2367,#2442,#2509,#2519,#2531,#2594,#2661,#2671,#2683,#2746,#2813,#2823,#2835,#2898,#2965,#2975,#2987,#3050,#3117,#3127,#3139,#3202,#3269,#3279,#3291,#3354,#3421,#3431,#3443,#3506,#3573,#3583,#3595,#3658,#3725,#3735,#3747,#3810,#3877,#3887,#3899,#3962,#4029,#4039,#4051,#4114,#4181,#4191,#4203,#4266,#4333,#4343,#4355,#4418,#4485,#4495,#4507,#4570,#4637,#4647,#4659,#4722,#4789,#4799,#4811,#4874,#4941,#4951,#4963,#5026,#5093,#5103,#5115,#5178,#5245,#5255,#5267,#5330,#5397,#5407,#5419,#5482,#5549,#5559,#5571,#5634,#5701,#5711,#5723,#5786,#5853,#5863,#5875,#5938,#6005,#6015,#6027,#6090,#6157,#6167,#6179,#6242,#6309,#6319,#6331,#6394,#6461,#6471,#6483,#6546,#6613,#6623,#6635,#6698,#6765,#6775,#6787,#6850,#6917,#6927,#6939,#7002,#7069,#7079,#7091,#7154,#7221,#7231,#7253,#7273,#7289,#7296,#7321,#7349,#7362,#7384,#7397,#7419,#7432,#7454,#7467,#7489,#7502,#7524,#7537,#7559,#7572,#7594,#7607,#7629,#7642,#7664,#7677,#7699,#7712,#7734,#7747,#7769,#7782,#7804,#7817,#7839,#7852,#7874,#7887,#7909,#7922,#7944,#7957,#7979,#7992,#8014,#8027,#8049,#8062,#8084,#8097,#8119,#8132,#8154,#8167,#8189,#8202,#8224,#8237,#8259,#8272,#8294,#8307,#8329,#8342,#8364,#8377,#8399,#8412,#8434,#8465,#8488,#8526,#8549,#8569,#8575,#8593,#8666,#8935,#9001,#9014,#9024,#9061,#9083,#9096,#9118,#9131,#9153,#9166,#9188,#9201,#9223,#9236,#9258,#9271,#9293,#9306,#9328,#9341,#9363,#9376,#9398,#9411,#9433,#9446,#9468,#9481,#9503,#9516,#9538,#9551,#9573,#9586,#9608,#9621,#9643,#9656,#9678,#9691,#9713,#9726,#9748,#9761,#9783,#9796,#9818,#9831,#9853,#9866,#9888,#9901,#9923,#9936,#9958,#9971,#9993,#10006,#10028,#10041,#10063,#10076,#10098,#10111,#10128,#10138,#10248,#10259,#10269,#10279,#10289,#10299,#10309,#10320,#10329,#10337,#10347,#10357,#10367,#10377,#10387,#10397,#10407,#10416,#10424,#10434,#10444,#10454,#10464,#10474,#10484,#10494,#10503,#10511,#10521,#10531,#10541,#10551,#10561,#10571,#10581,#10590,#10598,#10608,#10618,#10628,#10638,#10648,#10658,#10668,#10677,#10685,#10695,#10705,#10715,#10725,#10735,#10745,#10755,#10764,#10772,#10782,#10792,#10802,#10812,#10822,#10832,#10842,#10851,#10859,#10869,#10879,#10889,#10899,#10909,#10919,#10929,#10938,#10946,#10956,#10966,#10976,#10986,#10996,#11006,#11016,#11025,#11033,#11043,#11053,#11063,#11073,#11083,#11093,#11103,#11112,#11120,#11130,#11140,#11150,#11160,#11170,#11180,#11190,#11199,#11207,#11217,#11227,#11237,#11247,#11257,#11267,#11277,#11286,#11294,#11304,#11314,#11324,#11334,#11344,#11354,#11364,#11373,#11381,#11391,#11401,#11411,#11421,#11431,#11441,#11451,#11460,#11468,#11478,#11488,#11498,#11508,#11518,#11528,#11538,#11547,#11555,#11565,#11575,#11585,#11595,#11605,#11615,#11625,#11634,#11642,#11652,#11662,#11672,#11682,#11692,#11702,#11712,#11721,#11729,#11739,#11749,#11759,#11769,#11779,#11789,#11799,#11808,#11816,#11826,#11836,#11846,#11856,#11866,#11876,#11886,#11895,#11903,#11913,#11923,#11933,#11943,#11953,#11963,#11973,#11982,#11990,#12000,#12010,#12020,#12030,#12040,#12050,#12060,#12069,#12077,#12087,#12097,#12107,#12117,#12127,#12137,#12147,#12156,#12164,#12174,#12184,#12194,#12204,#12214,#12224,#12234,#12243,#12251,#12261,#12271,#12281,#12291,#12301,#12311,#12321,#12330,#12338,#12348,#12358,#12368,#12378,#12388,#12398,#12408,#12417,#12425,#12435,#12445,#12455,#12465,#12475,#12485,#12495,#12504,#12512,#12522,#12532,#12542,#12552,#12562,#12572,#12582,#12591,#12599,#12609,#12619,#12629,#12639,#12649,#12659,#12669,#12678,#12686,#12696,#12706,#12716,#12726,#12736,#12746,#12756,#12765,#12773,#12783,#12793,#12803,#12813,#12823,#12833,#12843,#12852,#12860,#12870,#12880,#12890,#12900,#12910,#12920,#12930,#12939,#12947,#12957,#12967,#12977,#12987,#12997,#13007,#13017,#13026,#13034,#13105,#13172,#13182,#13454,#13464,#13722,#13731,#13794,#13859,#13869,#13878,#13941,#14006,#14016,#14025,#14088,#14153,#14163,#14172,#14235,#14300,#14310,#14319,#14382,#14447,#14457,#14466,#14529,#14594,#14604,#14613,#14676,#14741,#14751,#14760,#14823,#14888,#14898,#14907,#14970,#15035,#15045,#15054,#15117,#15182,#15192,#15201,#15264,#15329,#15339,#15348,#15411,#15476,#15486,#15495,#15558,#15623,#15633,#15642,#15705,#15770,#15780,#15789,#15852,#15917,#15927,#15936,#15999,#16064,#16074,#16083,#16146,#16211,#16221,#16230,#16293,#16358,#16368,#16377,#16440,#16505,#16515,#16524,#16587,#16652,#16662,#16671,#16734,#16799,#16809,#16818,#16881,#16946,#16956,#16965,#17028,#17093,#17103,#17112,#17175,#17240,#17250,#17259,#17322,#17387,#17397,#17406,#17469,#17534,#17544,#17553,#17616,#17681,#17691,#17700,#17763,#17828,#17838,#17847,#17910,#17975,#17985,#17994,#18057,#18122,#18132,#18141,#18204,#18269,#18279,#18303,#18323,#18336,#18342,#18361,#18372,#18381,#18391,#18401,#18411,#18421,#18432,#18441,#18449,#18461,#18482,#18495,#18516,#18529,#18550,#18563,#18584,#18597,#18618,#18631,#18652,#18665,#18686,#18699,#18720,#18733,#18754,#18767,#18788,#18801,#18822,#18835,#18856,#18869,#18890,#18903,#18924,#18937,#18958,#18971,#18992,#19005,#19026,#19039,#19060,#19073,#19094,#19107,#19128,#19141,#19162,#19175,#19196,#19209,#19230,#19243,#19264,#19277,#19298,#19311,#19332,#19345,#19366,#19379,#19400,#19413,#19434,#19447,#19468,#19481,#19502,#19512,#19525,#19536,#19549,#19571,#19629,#19684,#19694,#19752,#19807,#19817,#19875,#19930,#19940,#19998,#20053,#20063,#20121,#20176,#20186,#20244,#20299,#20309,#20367,#20422,#20432,#20490,#20545,#20555,#20613,#20668,#20678,#20736,#20791,#20801,#20859,#20914,#20924,#20982,#21037,#21047,#21105,#21160,#21170,#21228,#21283,#21293,#21351,#21406,#21416,#21474,#21529,#21539,#21597,#21652,#21662,#21720,#21775,#21785,#21843,#21898,#21908,#21966,#22021,#22031,#22089,#22144,#22154,#22212,#22267,#22277,#22335,#22390,#22400,#22458,#22513,#22523,#22581,#22636,#22646,#22704,#22759,#22769,#22827,#22882,#22892,#22950,#23005,#23015,#23073,#23128,#23138,#23196,#23251,#23261,#23319,#23374,#23384,#23395,#23404,#23414,#23424,#23434,#23444,#23455,#23464,#23472,#23481,#23491,#23501,#23511,#23521,#23531,#23541,#23551,#23561,#23571,#23581,#23591,#23601,#23611,#23621,#23631,#23641,#23651,#23661,#23671,#23681,#23691,#23701,#23711,#23721,#23731,#23741,#23751,#23761,#23771,#23781,#23791,#23804,#23826,#23839,#23861,#23874,#23896,#23909,#23931,#23944,#23966,#23979,#24001,#24014,#24036,#24049,#24071,#24084,#24106,#24119,#24141,#24154,#24176,#24189,#24211,#24224,#24246,#24259,#24281,#24294,#24316,#24329,#24351,#24364,#24386,#24399,#24421,#24434,#24456,#24469,#24491,#24504,#24526,#24539,#24561,#24574,#24596,#24609,#24631,#24644,#24666,#24679,#24701,#24714,#24736,#24749,#24771,#24784,#24806,#24819,#24841,#24849,#24859,#24868,#24878,#24888,#24898,#24908,#24918,#24925,#24935,#24944,#24954,#24964,#24974,#24984,#24994,#25001,#25011,#25020,#25030,#25040,#25050,#25060,#25070,#25077,#25087,#25096,#25106,#25116,#25126,#25136,#25146,#25153,#25163,#25172,#25182,#25192,#25202,#25212,#25222,#25229,#25239,#25248,#25258,#25268,#25278,#25288,#25298,#25305,#25315,#25324,#25334,#25344,#25354,#25364,#25374,#25381,#25391,#25400,#25410,#25420,#25430,#25440,#25450,#25457,#25467,#25476,#25486,#25496,#25506,#25516,#25526,#25533,#25543,#25552,#25562,#25572,#25582,#25592,#25602,#25609,#25619,#25628,#25638,#25648,#25658,#25668,#25678,#25685,#25695,#25704,#25714,#25724,#25734,#25744,#25754,#25761,#25771,#25780,#25790,#25800,#25810,#25820,#25830,#25837,#25847,#25856,#25866,#25876,#25886,#25896,#25906,#25913,#25923,#25932,#25942,#25952,#25962,#25972,#25982,#25989,#25999,#26008,#26018,#26028,#26038,#26048,#26058,#26065,#26075,#26084,#26094,#26104,#26114,#26124,#26134,#26141,#26151,#26160,#26170,#26180,#26190,#26200,#26210,#26217,#26227,#26236,#26246,#26256,#26266,#26276,#26286,#26293,#26303,#26312,#26322,#26332,#26342,#26352,#26362,#26369,#26379,#26388,#26398,#26408,#26418,#26428,#26438,#26445,#26455,#26464,#26474,#26484,#26494,#26504,#26514,#26521,#26531,#26540,#26550,#26560,#26570,#26580,#26590,#26597,#26607,#26616,#26626,#26636,#26646,#26656,#26666,#26673,#26683,#26692,#26702,#26712,#26722,#26732,#26742,#26749,#26759,#26768,#26778,#26788,#26798,#26808,#26818,#26825,#26835,#26844,#26854,#26864,#26874,#26884,#26894,#26901,#26911,#26920,#26930,#26940,#26950,#26960,#26970,#26977,#26987,#26996,#27006,#27016,#27026,#27036,#27046,#27053,#27063,#27072,#27082,#27092,#27102,#27112,#27122,#27129,#27139,#27148,#27158,#27168,#27178,#27188,#27198,#27205,#27279,#27346,#27356,#27612,#27621,#27630,#27639,#27648,#27657,#27666,#27675,#27684,#27693,#27702,#27711,#27720,#27729,#27738,#27747,#27756,#27765,#27774,#27783,#27792,#27801,#27810,#27819,#27828,#27837,#27846,#27855,#27864,#27873,#27882,#27891,#27952,#28018,#28028,#28038,#28047,#28057,#28067,#28077,#28087,#28095,#28105,#28114,#28124,#28134,#28144,#28154,#28162,#28172,#28181,#28191,#28201,#28211,#28221,#28229,#28239,#28248,#28258,#28268,#28278,#28288,#28296,#28306,#28315,#28325,#28335,#28345,#28355,#28363,#28373,#28382,#28392,#28402,#28412,#28422,#28430,#28440,#28449,#28459,#28469,#28479,#28489,#28497,#28507,#28516,#28526,#28536,#28546,#28556,#28564,#28574,#28583,#28593,#28603,#28613,#28623,#28631,#28641,#28650,#28660,#28670,#28680,#28690,#28698,#28708,#28717,#28727,#28737,#28747,#28757,#28765,#28775,#28784,#28794,#28804,#28814,#28824,#28832,#28842,#28851,#28861,#28871,#28881,#28891,#28899,#28909,#28918,#28928,#28938,#28948,#28958,#28966,#28976,#28985,#28995,#29005,#29015,#29025,#29033,#29043,#29052,#29062,#29072,#29082,#29092,#29100,#29110,#29119,#29129,#29139,#29149,#29159,#29167,#29177,#29186,#29196,#29206,#29216,#29226,#29234,#29244,#29253,#29263,#29273,#29283,#29293,#29301,#29311,#29320,#29330,#29340,#29350,#29360,#29368,#29378,#29387,#29397,#29407,#29417,#29427,#29435,#29445,#29454,#29464,#29474,#29484,#29494,#29502,#29512,#29521,#29531,#29541,#29551,#29561,#29569,#29579,#29588,#29598,#29608,#29618,#29628,#29636,#29646,#29655,#29665,#29675,#29685,#29695,#29703,#29713,#29722,#29732,#29742,#29752,#29762,#29770,#29780,#29789,#29799,#29809,#29819,#29829,#29837,#29847,#29856,#29866,#29876,#29886,#29896,#29904,#29914,#29923,#29933,#29943,#29953,#29963,#29971,#29981,#29990,#30000,#30010,#30020,#30030,#30038,#30048,#30057,#30067,#30077,#30087,#30097,#30105,#30114,#30177,#30242,#30252,#30261,#30324,#30389,#30399,#30408,#30471,#30536,#30546,#30555,#30618,#30683,#30693,#30702,#30765,#30830,#30840,#30849,#30912,#30977,#30987,#30996,#31059,#31124,#31134,#31143,#31206,#31271,#31281,#31290,#31353,#31418,#31428,#31437,#31500,#31565,#31575,#31584,#31647,#31712,#31722,#31731,#31794,#31859,#31869,#31878,#31941,#32006,#32016,#32025,#32088,#32153,#32163,#32172,#32235,#32300,#32310,#32319,#32382,#32447,#32457,#32466,#32529,#32594,#32604,#32613,#32676,#32741,#32751,#32760,#32823,#32888,#32898,#32907,#32970,#33035,#33045,#33054,#33117,#33182,#33192,#33201,#33264,#33329,#33339,#33348,#33411,#33476,#33486,#33495,#33558,#33623,#33633,#33642,#33705,#33770,#33780,#33789,#33852,#33917,#33927,#33936,#33999,#34064,#34074,#34083,#34146,#34211,#34221,#34230,#34293,#34358,#34368,#34377,#34440,#34505,#34515,#34521,#34532,#34541,#34551,#34561,#34571,#34581,#34592,#34601,#34609,#34619,#34629,#34639,#34649,#34659,#34669,#34679,#34689,#34699,#34709,#34719,#34729,#34739,#34749,#34759,#34769,#34779,#34789,#34799,#34809,#34819,#34829,#34839,#34849,#34859,#34869,#34879,#34889,#34899,#34909,#34919,#34929,#34938,#34948,#34958,#34968,#34978,#34988,#34995,#35005,#35014,#35024,#35034,#35044,#35054,#35064,#35071,#35081,#35090,#35100,#35110,#35120,#35130,#35140,#35147,#35157,#35166,#35176,#35186,#35196,#35206,#35216,#35223,#35233,#35242,#35252,#35262,#35272,#35282,#35292,#35299,#35309,#35318,#35328,#35338,#35348,#35358,#35368,#35375,#35385,#35394,#35404,#35414,#35424,#35434,#35444,#35451,#35461,#35470,#35480,#35490,#35500,#35510,#35520,#35527,#35537,#35546,#35556,#35566,#35576,#35586,#35596,#35603,#35613,#35622,#35632,#35642,#35652,#35662,#35672,#35679,#35689,#35698,#35708,#35718,#35728,#35738,#35748,#35755,#35765,#35774,#35784,#35794,#35804,#35814,#35824,#35831,#35841,#35850,#35860,#35870,#35880,#35890,#35900,#35907,#35917,#35926,#35936,#35946,#35956,#35966,#35976,#35983,#35993,#36002,#36012,#36022,#36032,#36042,#36052,#36059,#36069,#36078,#36088,#36098,#36108,#36118,#36128,#36135,#36145,#36154,#36164,#36174,#36184,#36194,#36204,#36211,#36221,#36230,#36240,#36250,#36260,#36270,#36280,#36287,#36297,#36306,#36316,#36326,#36336,#36346,#36356,#36363,#36373,#36382,#36392,#36402,#36412,#36422,#36432,#36439,#36449,#36458,#36468,#36478,#36488,#36498,#36508,#36515,#36525,#36534,#36544,#36554,#36564,#36574,#36584,#36591,#36601,#36610,#36620,#36630,#36640,#36650,#36660,#36667,#36677,#36686,#36696,#36706,#36716,#36726,#36736,#36743,#36753,#36762,#36772,#36782,#36792,#36802,#36812,#36819,#36829,#36838,#36848,#36858,#36868,#36878,#36888,#36895,#36905,#36914,#36924,#36934,#36944,#36954,#36964,#36971,#36981,#36990,#37000,#37010,#37020,#37030,#37040,#37047,#37057,#37066,#37076,#37086,#37096,#37106,#37116,#37123,#37133,#37142,#37152,#37162,#37172,#37182,#37192,#37199,#37209,#37218,#37228,#37238,#37248,#37258,#37268));+#17=ADVANCED_FACE('',(#18),#305,.F.);+#18=FACE_BOUND('',#19,.F.);+#19=EDGE_LOOP('',(#20,#28,#38,#44,#51,#55,#59,#63,#67,#71,#75,#79,#83,#87,#91,#95,#99,#103,#107,#111,#115,#119,#123,#127,#131,#135,#139,#143,#147,#151,#155,#159,#163,#167,#171,#175,#179,#183,#187,#191,#195,#199,#203,#207,#211,#215,#219,#223,#227,#231,#235,#239,#243,#247,#251,#255,#259,#263,#267,#271,#275,#279,#283,#287,#291,#295,#299,#303));+#20=ORIENTED_EDGE('',*,*,#21,.T.);+#21=EDGE_CURVE('',#22,#24,#26,.T.);+#22=VERTEX_POINT('',#23);+#23=CARTESIAN_POINT('',(6.7875,6.925,0.85));+#24=VERTEX_POINT('',#25);+#25=CARTESIAN_POINT('',(6.722628206646,6.795256413291,1.460395584541));+#26=B_SPLINE_CURVE_WITH_KNOTS('',1,(#23,#27),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#27=CARTESIAN_POINT('',(6.718419117457,6.786838234914,1.5));+#28=ORIENTED_EDGE('',*,*,#29,.F.);+#29=EDGE_CURVE('',#30,#24,#32,.T.);+#30=VERTEX_POINT('',#31);+#31=CARTESIAN_POINT('',(-6.722628206646,6.795256413291,1.460395584541));+#32=B_SPLINE_CURVE_WITH_KNOTS('',2,(#33,#34,#35,#36,#37),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.698356801641,-4.048920165974E-02,13.477327436574,14.135195036556),.UNSPECIFIED.);+#33=CARTESIAN_POINT('',(-7.416775919098,6.795256413291,1.460395584541));+#34=CARTESIAN_POINT('',(-7.087842119108,6.795256413291,1.460395584541));+#35=CARTESIAN_POINT('',(1.021931826573E-15,6.795256413291,1.460395584541));+#36=CARTESIAN_POINT('',(7.087842119108,6.795256413291,1.460395584541));+#37=CARTESIAN_POINT('',(7.416775919098,6.795256413291,1.460395584541));+#38=ORIENTED_EDGE('',*,*,#39,.F.);+#39=EDGE_CURVE('',#40,#30,#42,.T.);+#40=VERTEX_POINT('',#41);+#41=CARTESIAN_POINT('',(-6.7875,6.925,0.85));+#42=B_SPLINE_CURVE_WITH_KNOTS('',1,(#41,#43),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#43=CARTESIAN_POINT('',(-6.718419117457,6.786838234914,1.5));+#44=ORIENTED_EDGE('',*,*,#45,.T.);+#45=EDGE_CURVE('',#40,#46,#48,.T.);+#46=VERTEX_POINT('',#47);+#47=CARTESIAN_POINT('',(-6.29,6.925,0.85));+#48=LINE('',#41,#49);+#49=VECTOR('',#50,1.);+#50=DIRECTION('',(1.,1.110223024625E-16,0.));+#51=ORIENTED_EDGE('',*,*,#52,.T.);+#52=EDGE_CURVE('',#46,#53,#48,.T.);+#53=VERTEX_POINT('',#54);+#54=CARTESIAN_POINT('',(-6.11,6.925,0.85));+#55=ORIENTED_EDGE('',*,*,#56,.T.);+#56=EDGE_CURVE('',#53,#57,#48,.T.);+#57=VERTEX_POINT('',#58);+#58=CARTESIAN_POINT('',(-5.89,6.925,0.85));+#59=ORIENTED_EDGE('',*,*,#60,.T.);+#60=EDGE_CURVE('',#57,#61,#48,.T.);+#61=VERTEX_POINT('',#62);+#62=CARTESIAN_POINT('',(-5.71,6.925,0.85));+#63=ORIENTED_EDGE('',*,*,#64,.T.);+#64=EDGE_CURVE('',#61,#65,#48,.T.);+#65=VERTEX_POINT('',#66);+#66=CARTESIAN_POINT('',(-5.49,6.925,0.85));+#67=ORIENTED_EDGE('',*,*,#68,.T.);+#68=EDGE_CURVE('',#65,#69,#48,.T.);+#69=VERTEX_POINT('',#70);+#70=CARTESIAN_POINT('',(-5.31,6.925,0.85));+#71=ORIENTED_EDGE('',*,*,#72,.T.);+#72=EDGE_CURVE('',#69,#73,#48,.T.);+#73=VERTEX_POINT('',#74);+#74=CARTESIAN_POINT('',(-5.09,6.925,0.85));+#75=ORIENTED_EDGE('',*,*,#76,.T.);+#76=EDGE_CURVE('',#73,#77,#48,.T.);+#77=VERTEX_POINT('',#78);+#78=CARTESIAN_POINT('',(-4.91,6.925,0.85));+#79=ORIENTED_EDGE('',*,*,#80,.T.);+#80=EDGE_CURVE('',#77,#81,#48,.T.);+#81=VERTEX_POINT('',#82);+#82=CARTESIAN_POINT('',(-4.69,6.925,0.85));+#83=ORIENTED_EDGE('',*,*,#84,.T.);+#84=EDGE_CURVE('',#81,#85,#48,.T.);+#85=VERTEX_POINT('',#86);+#86=CARTESIAN_POINT('',(-4.51,6.925,0.85));+#87=ORIENTED_EDGE('',*,*,#88,.T.);+#88=EDGE_CURVE('',#85,#89,#48,.T.);+#89=VERTEX_POINT('',#90);+#90=CARTESIAN_POINT('',(-4.29,6.925,0.85));+#91=ORIENTED_EDGE('',*,*,#92,.T.);+#92=EDGE_CURVE('',#89,#93,#48,.T.);+#93=VERTEX_POINT('',#94);+#94=CARTESIAN_POINT('',(-4.11,6.925,0.85));+#95=ORIENTED_EDGE('',*,*,#96,.T.);+#96=EDGE_CURVE('',#93,#97,#48,.T.);+#97=VERTEX_POINT('',#98);+#98=CARTESIAN_POINT('',(-3.89,6.925,0.85));+#99=ORIENTED_EDGE('',*,*,#100,.T.);+#100=EDGE_CURVE('',#97,#101,#48,.T.);+#101=VERTEX_POINT('',#102);+#102=CARTESIAN_POINT('',(-3.71,6.925,0.85));+#103=ORIENTED_EDGE('',*,*,#104,.T.);+#104=EDGE_CURVE('',#101,#105,#48,.T.);+#105=VERTEX_POINT('',#106);+#106=CARTESIAN_POINT('',(-3.49,6.925,0.85));+#107=ORIENTED_EDGE('',*,*,#108,.T.);+#108=EDGE_CURVE('',#105,#109,#48,.T.);+#109=VERTEX_POINT('',#110);+#110=CARTESIAN_POINT('',(-3.31,6.925,0.85));+#111=ORIENTED_EDGE('',*,*,#112,.T.);+#112=EDGE_CURVE('',#109,#113,#48,.T.);+#113=VERTEX_POINT('',#114);+#114=CARTESIAN_POINT('',(-3.09,6.925,0.85));+#115=ORIENTED_EDGE('',*,*,#116,.T.);+#116=EDGE_CURVE('',#113,#117,#48,.T.);+#117=VERTEX_POINT('',#118);+#118=CARTESIAN_POINT('',(-2.91,6.925,0.85));+#119=ORIENTED_EDGE('',*,*,#120,.T.);+#120=EDGE_CURVE('',#117,#121,#48,.T.);+#121=VERTEX_POINT('',#122);+#122=CARTESIAN_POINT('',(-2.69,6.925,0.85));+#123=ORIENTED_EDGE('',*,*,#124,.T.);+#124=EDGE_CURVE('',#121,#125,#48,.T.);+#125=VERTEX_POINT('',#126);+#126=CARTESIAN_POINT('',(-2.51,6.925,0.85));+#127=ORIENTED_EDGE('',*,*,#128,.T.);+#128=EDGE_CURVE('',#125,#129,#48,.T.);+#129=VERTEX_POINT('',#130);+#130=CARTESIAN_POINT('',(-2.29,6.925,0.85));+#131=ORIENTED_EDGE('',*,*,#132,.T.);+#132=EDGE_CURVE('',#129,#133,#48,.T.);+#133=VERTEX_POINT('',#134);+#134=CARTESIAN_POINT('',(-2.11,6.925,0.85));+#135=ORIENTED_EDGE('',*,*,#136,.T.);+#136=EDGE_CURVE('',#133,#137,#48,.T.);+#137=VERTEX_POINT('',#138);+#138=CARTESIAN_POINT('',(-1.89,6.925,0.85));+#139=ORIENTED_EDGE('',*,*,#140,.T.);+#140=EDGE_CURVE('',#137,#141,#48,.T.);+#141=VERTEX_POINT('',#142);+#142=CARTESIAN_POINT('',(-1.71,6.925,0.85));+#143=ORIENTED_EDGE('',*,*,#144,.T.);+#144=EDGE_CURVE('',#141,#145,#48,.T.);+#145=VERTEX_POINT('',#146);+#146=CARTESIAN_POINT('',(-1.49,6.925,0.85));+#147=ORIENTED_EDGE('',*,*,#148,.T.);+#148=EDGE_CURVE('',#145,#149,#48,.T.);+#149=VERTEX_POINT('',#150);+#150=CARTESIAN_POINT('',(-1.31,6.925,0.85));+#151=ORIENTED_EDGE('',*,*,#152,.T.);+#152=EDGE_CURVE('',#149,#153,#48,.T.);+#153=VERTEX_POINT('',#154);+#154=CARTESIAN_POINT('',(-1.09,6.925,0.85));+#155=ORIENTED_EDGE('',*,*,#156,.T.);+#156=EDGE_CURVE('',#153,#157,#48,.T.);+#157=VERTEX_POINT('',#158);+#158=CARTESIAN_POINT('',(-0.91,6.925,0.85));+#159=ORIENTED_EDGE('',*,*,#160,.T.);+#160=EDGE_CURVE('',#157,#161,#48,.T.);+#161=VERTEX_POINT('',#162);+#162=CARTESIAN_POINT('',(-0.69,6.925,0.85));+#163=ORIENTED_EDGE('',*,*,#164,.T.);+#164=EDGE_CURVE('',#161,#165,#48,.T.);+#165=VERTEX_POINT('',#166);+#166=CARTESIAN_POINT('',(-0.51,6.925,0.85));+#167=ORIENTED_EDGE('',*,*,#168,.T.);+#168=EDGE_CURVE('',#165,#169,#48,.T.);+#169=VERTEX_POINT('',#170);+#170=CARTESIAN_POINT('',(-0.29,6.925,0.85));+#171=ORIENTED_EDGE('',*,*,#172,.T.);+#172=EDGE_CURVE('',#169,#173,#48,.T.);+#173=VERTEX_POINT('',#174);+#174=CARTESIAN_POINT('',(-0.11,6.925,0.85));+#175=ORIENTED_EDGE('',*,*,#176,.T.);+#176=EDGE_CURVE('',#173,#177,#48,.T.);+#177=VERTEX_POINT('',#178);+#178=CARTESIAN_POINT('',(0.11,6.925,0.85));+#179=ORIENTED_EDGE('',*,*,#180,.T.);+#180=EDGE_CURVE('',#177,#181,#48,.T.);+#181=VERTEX_POINT('',#182);+#182=CARTESIAN_POINT('',(0.29,6.925,0.85));+#183=ORIENTED_EDGE('',*,*,#184,.T.);+#184=EDGE_CURVE('',#181,#185,#48,.T.);+#185=VERTEX_POINT('',#186);+#186=CARTESIAN_POINT('',(0.51,6.925,0.85));+#187=ORIENTED_EDGE('',*,*,#188,.T.);+#188=EDGE_CURVE('',#185,#189,#48,.T.);+#189=VERTEX_POINT('',#190);+#190=CARTESIAN_POINT('',(0.69,6.925,0.85));+#191=ORIENTED_EDGE('',*,*,#192,.T.);+#192=EDGE_CURVE('',#189,#193,#48,.T.);+#193=VERTEX_POINT('',#194);+#194=CARTESIAN_POINT('',(0.91,6.925,0.85));+#195=ORIENTED_EDGE('',*,*,#196,.T.);+#196=EDGE_CURVE('',#193,#197,#48,.T.);+#197=VERTEX_POINT('',#198);+#198=CARTESIAN_POINT('',(1.09,6.925,0.85));+#199=ORIENTED_EDGE('',*,*,#200,.T.);+#200=EDGE_CURVE('',#197,#201,#48,.T.);+#201=VERTEX_POINT('',#202);+#202=CARTESIAN_POINT('',(1.31,6.925,0.85));+#203=ORIENTED_EDGE('',*,*,#204,.T.);+#204=EDGE_CURVE('',#201,#205,#48,.T.);+#205=VERTEX_POINT('',#206);+#206=CARTESIAN_POINT('',(1.49,6.925,0.85));+#207=ORIENTED_EDGE('',*,*,#208,.T.);+#208=EDGE_CURVE('',#205,#209,#48,.T.);+#209=VERTEX_POINT('',#210);+#210=CARTESIAN_POINT('',(1.71,6.925,0.85));+#211=ORIENTED_EDGE('',*,*,#212,.T.);+#212=EDGE_CURVE('',#209,#213,#48,.T.);+#213=VERTEX_POINT('',#214);+#214=CARTESIAN_POINT('',(1.89,6.925,0.85));+#215=ORIENTED_EDGE('',*,*,#216,.T.);+#216=EDGE_CURVE('',#213,#217,#48,.T.);+#217=VERTEX_POINT('',#218);+#218=CARTESIAN_POINT('',(2.11,6.925,0.85));+#219=ORIENTED_EDGE('',*,*,#220,.T.);+#220=EDGE_CURVE('',#217,#221,#48,.T.);+#221=VERTEX_POINT('',#222);+#222=CARTESIAN_POINT('',(2.29,6.925,0.85));+#223=ORIENTED_EDGE('',*,*,#224,.T.);+#224=EDGE_CURVE('',#221,#225,#48,.T.);+#225=VERTEX_POINT('',#226);+#226=CARTESIAN_POINT('',(2.51,6.925,0.85));+#227=ORIENTED_EDGE('',*,*,#228,.T.);+#228=EDGE_CURVE('',#225,#229,#48,.T.);+#229=VERTEX_POINT('',#230);+#230=CARTESIAN_POINT('',(2.69,6.925,0.85));+#231=ORIENTED_EDGE('',*,*,#232,.T.);+#232=EDGE_CURVE('',#229,#233,#48,.T.);+#233=VERTEX_POINT('',#234);+#234=CARTESIAN_POINT('',(2.91,6.925,0.85));+#235=ORIENTED_EDGE('',*,*,#236,.T.);+#236=EDGE_CURVE('',#233,#237,#48,.T.);+#237=VERTEX_POINT('',#238);+#238=CARTESIAN_POINT('',(3.09,6.925,0.85));+#239=ORIENTED_EDGE('',*,*,#240,.T.);+#240=EDGE_CURVE('',#237,#241,#48,.T.);+#241=VERTEX_POINT('',#242);+#242=CARTESIAN_POINT('',(3.31,6.925,0.85));+#243=ORIENTED_EDGE('',*,*,#244,.T.);+#244=EDGE_CURVE('',#241,#245,#48,.T.);+#245=VERTEX_POINT('',#246);+#246=CARTESIAN_POINT('',(3.49,6.925,0.85));+#247=ORIENTED_EDGE('',*,*,#248,.T.);+#248=EDGE_CURVE('',#245,#249,#48,.T.);+#249=VERTEX_POINT('',#250);+#250=CARTESIAN_POINT('',(3.71,6.925,0.85));+#251=ORIENTED_EDGE('',*,*,#252,.T.);+#252=EDGE_CURVE('',#249,#253,#48,.T.);+#253=VERTEX_POINT('',#254);+#254=CARTESIAN_POINT('',(3.89,6.925,0.85));+#255=ORIENTED_EDGE('',*,*,#256,.T.);+#256=EDGE_CURVE('',#253,#257,#48,.T.);+#257=VERTEX_POINT('',#258);+#258=CARTESIAN_POINT('',(4.11,6.925,0.85));+#259=ORIENTED_EDGE('',*,*,#260,.T.);+#260=EDGE_CURVE('',#257,#261,#48,.T.);+#261=VERTEX_POINT('',#262);+#262=CARTESIAN_POINT('',(4.29,6.925,0.85));+#263=ORIENTED_EDGE('',*,*,#264,.T.);+#264=EDGE_CURVE('',#261,#265,#48,.T.);+#265=VERTEX_POINT('',#266);+#266=CARTESIAN_POINT('',(4.51,6.925,0.85));+#267=ORIENTED_EDGE('',*,*,#268,.T.);+#268=EDGE_CURVE('',#265,#269,#48,.T.);+#269=VERTEX_POINT('',#270);+#270=CARTESIAN_POINT('',(4.69,6.925,0.85));+#271=ORIENTED_EDGE('',*,*,#272,.T.);+#272=EDGE_CURVE('',#269,#273,#48,.T.);+#273=VERTEX_POINT('',#274);+#274=CARTESIAN_POINT('',(4.91,6.925,0.85));+#275=ORIENTED_EDGE('',*,*,#276,.T.);+#276=EDGE_CURVE('',#273,#277,#48,.T.);+#277=VERTEX_POINT('',#278);+#278=CARTESIAN_POINT('',(5.09,6.925,0.85));+#279=ORIENTED_EDGE('',*,*,#280,.T.);+#280=EDGE_CURVE('',#277,#281,#48,.T.);+#281=VERTEX_POINT('',#282);+#282=CARTESIAN_POINT('',(5.31,6.925,0.85));+#283=ORIENTED_EDGE('',*,*,#284,.T.);+#284=EDGE_CURVE('',#281,#285,#48,.T.);+#285=VERTEX_POINT('',#286);+#286=CARTESIAN_POINT('',(5.49,6.925,0.85));+#287=ORIENTED_EDGE('',*,*,#288,.T.);+#288=EDGE_CURVE('',#285,#289,#48,.T.);+#289=VERTEX_POINT('',#290);+#290=CARTESIAN_POINT('',(5.71,6.925,0.85));+#291=ORIENTED_EDGE('',*,*,#292,.T.);+#292=EDGE_CURVE('',#289,#293,#48,.T.);+#293=VERTEX_POINT('',#294);+#294=CARTESIAN_POINT('',(5.89,6.925,0.85));+#295=ORIENTED_EDGE('',*,*,#296,.T.);+#296=EDGE_CURVE('',#293,#297,#48,.T.);+#297=VERTEX_POINT('',#298);+#298=CARTESIAN_POINT('',(6.11,6.925,0.85));+#299=ORIENTED_EDGE('',*,*,#300,.T.);+#300=EDGE_CURVE('',#297,#301,#48,.T.);+#301=VERTEX_POINT('',#302);+#302=CARTESIAN_POINT('',(6.29,6.925,0.85));+#303=ORIENTED_EDGE('',*,*,#304,.T.);+#304=EDGE_CURVE('',#301,#22,#48,.T.);+#305=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#41,#43),(#23,#27)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,13.575),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#306=ADVANCED_FACE('',(#307),#331,.F.);+#307=FACE_BOUND('',#308,.F.);+#308=EDGE_LOOP('',(#309,#317,#325,#326));+#309=ORIENTED_EDGE('',*,*,#310,.T.);+#310=EDGE_CURVE('',#311,#313,#315,.T.);+#311=VERTEX_POINT('',#312);+#312=CARTESIAN_POINT('',(6.925,6.7875,0.85));+#313=VERTEX_POINT('',#314);+#314=CARTESIAN_POINT('',(6.795128681966,6.722564340983,1.460996513181));+#315=B_SPLINE_CURVE_WITH_KNOTS('',1,(#312,#316),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#316=CARTESIAN_POINT('',(6.786838234914,6.718419117457,1.5));+#317=ORIENTED_EDGE('',*,*,#318,.F.);+#318=EDGE_CURVE('',#24,#313,#319,.T.);+#319=B_SPLINE_CURVE_WITH_KNOTS('',2,(#320,#321,#322,#323,#324),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.28964361549,-3.998243263537E-02,0.136741676868,0.386402859722),.UNSPECIFIED.);+#320=CARTESIAN_POINT('',(6.519827987965,6.997865034984,1.460996513181));+#321=CARTESIAN_POINT('',(6.608096545662,6.909596477286,1.460996513181));+#322=CARTESIAN_POINT('',(6.758846511474,6.758846511474,1.460996513181));+#323=CARTESIAN_POINT('',(6.909596477286,6.608096545662,1.460996513181));+#324=CARTESIAN_POINT('',(6.997865034984,6.519827987965,1.460996513181));+#325=ORIENTED_EDGE('',*,*,#21,.F.);+#326=ORIENTED_EDGE('',*,*,#327,.T.);+#327=EDGE_CURVE('',#22,#311,#328,.T.);+#328=LINE('',#23,#329);+#329=VECTOR('',#330,1.);+#330=DIRECTION('',(0.707106781187,-0.707106781187,0.));+#331=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#23,#27),(#312,#316)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#332=ADVANCED_FACE('',(#333),#380,.T.);+#333=FACE_BOUND('',#334,.T.);+#334=EDGE_LOOP('',(#335,#354,#364,#28));+#335=ORIENTED_EDGE('',*,*,#336,.T.);+#336=EDGE_CURVE('',#30,#337,#339,.T.);+#337=VERTEX_POINT('',#338);+#338=CARTESIAN_POINT('',(-6.702364620346,6.746349033255,1.5));+#339=B_SPLINE_CURVE_WITH_KNOTS('',7,(#340,#341,#342,#343,#344,#345,#346,#347,#348,#349,#350,#351,#352,#353),.UNSPECIFIED.,.F.,.F.,(8,6,8),(0.,0.287114751963,1.),.UNSPECIFIED.);+#340=CARTESIAN_POINT('',(-6.722568209866,6.795124813083,1.460996513181));+#341=CARTESIAN_POINT('',(-6.722334349043,6.794560223113,1.463500790273));+#342=CARTESIAN_POINT('',(-6.722033505414,6.793833922343,1.466023287274));+#343=CARTESIAN_POINT('',(-6.721662300087,6.792937753409,1.468547417085));+#344=CARTESIAN_POINT('',(-6.72121850494,6.791866337146,1.471053722456));+#345=CARTESIAN_POINT('',(-6.720701322937,6.79061774934,1.473520981663));+#346=CARTESIAN_POINT('',(-6.720111668451,6.789194197483,1.475927314193));+#347=CARTESIAN_POINT('',(-6.717815649655,6.783651117766,1.484021542055));+#348=CARTESIAN_POINT('',(-6.715749857523,6.778663854387,1.489283850135));+#349=CARTESIAN_POINT('',(-6.71329859628,6.772745986234,1.493715636718));+#350=CARTESIAN_POINT('',(-6.710573320655,6.766166588893,1.497005951412));+#351=CARTESIAN_POINT('',(-6.707760272226,6.75937528918,1.49905908446));+#352=CARTESIAN_POINT('',(-6.704993414942,6.752695504834,1.500000212186));+#353=CARTESIAN_POINT('',(-6.702364620347,6.746349033255,1.5));+#354=ORIENTED_EDGE('',*,*,#355,.T.);+#355=EDGE_CURVE('',#337,#356,#358,.T.);+#356=VERTEX_POINT('',#357);+#357=CARTESIAN_POINT('',(6.702364620346,6.746349033255,1.5));+#358=B_SPLINE_CURVE_WITH_KNOTS('',2,(#359,#360,#361,#362,#363),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.698356801641,-4.048920165974E-02,13.477327436574,14.135195036556),.UNSPECIFIED.);+#359=CARTESIAN_POINT('',(-7.416775919098,6.746349033255,1.5));+#360=CARTESIAN_POINT('',(-7.087842119108,6.746349033255,1.5));+#361=CARTESIAN_POINT('',(1.027361636513E-15,6.746349033255,1.5));+#362=CARTESIAN_POINT('',(7.087842119108,6.746349033255,1.5));+#363=CARTESIAN_POINT('',(7.416775919098,6.746349033255,1.5));+#364=ORIENTED_EDGE('',*,*,#365,.F.);+#365=EDGE_CURVE('',#24,#356,#366,.T.);+#366=B_SPLINE_CURVE_WITH_KNOTS('',7,(#367,#368,#369,#370,#371,#372,#373,#374,#375,#376,#377,#378,#379,#357),.UNSPECIFIED.,.F.,.F.,(8,6,8),(0.,0.290258407455,1.),.UNSPECIFIED.);+#367=CARTESIAN_POINT('',(6.722568209866,6.795124813083,1.460996513181));+#368=CARTESIAN_POINT('',(6.722331788471,6.794554041347,1.463528209919));+#369=CARTESIAN_POINT('',(6.722026910263,6.793818000241,1.466078525983));+#370=CARTESIAN_POINT('',(6.721650081747,6.792908255727,1.468630328488));+#371=CARTESIAN_POINT('',(6.721199014991,6.791819284247,1.471163479142));+#372=CARTESIAN_POINT('',(6.720672920856,6.790549180652,1.473656007605));+#373=CARTESIAN_POINT('',(6.720072802235,6.789100366138,1.476085284837));+#374=CARTESIAN_POINT('',(6.717760879705,6.78351889141,1.484160543135));+#375=CARTESIAN_POINT('',(6.715695756437,6.778533242809,1.489381305402));+#376=CARTESIAN_POINT('',(6.713250515509,6.772629908993,1.493773592334));+#377=CARTESIAN_POINT('',(6.710536108109,6.766076749845,1.497032992729));+#378=CARTESIAN_POINT('',(6.707735872866,6.75931638393,1.499067393924));+#379=CARTESIAN_POINT('',(6.704981822485,6.752667518159,1.500000204988));+#380=( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,2,((#33,#34,#35,#36,#37),(#381,#382,#383,#384,#385),(#359,#360,#361,#362,#363)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,1,1,3),(0.,13.517816638234),(-0.698356801641,-4.048920165974E-02,13.477327436574,14.135195036556),.UNSPECIFIED.) GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE(((1.,1.,1.,1.,1.),(0.777145961457,0.777145961457,0.777145961457,0.777145961457,0.777145961457),(1.,1.,1.,1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#381=CARTESIAN_POINT('',(-7.416775919098,6.786838234914,1.5));+#382=CARTESIAN_POINT('',(-7.087842119108,6.786838234914,1.5));+#383=CARTESIAN_POINT('',(9.608177093727E-16,6.786838234914,1.5));+#384=CARTESIAN_POINT('',(7.087842119108,6.786838234914,1.5));+#385=CARTESIAN_POINT('',(7.416775919098,6.786838234914,1.5));+#386=ADVANCED_FACE('',(#387),#435,.F.);+#387=FACE_BOUND('',#388,.F.);+#388=EDGE_LOOP('',(#389,#398,#403,#409,#410,#415,#423,#431));+#389=ORIENTED_EDGE('',*,*,#390,.T.);+#390=EDGE_CURVE('',#391,#393,#395,.T.);+#391=VERTEX_POINT('',#392);+#392=CARTESIAN_POINT('',(-7.,6.825,0.85));+#393=VERTEX_POINT('',#394);+#394=CARTESIAN_POINT('',(-6.825,7.,0.85));+#395=LINE('',#392,#396);+#396=VECTOR('',#397,1.);+#397=DIRECTION('',(0.707106781187,0.707106781187,0.));+#398=ORIENTED_EDGE('',*,*,#399,.T.);+#399=EDGE_CURVE('',#393,#400,#402,.T.);+#400=VERTEX_POINT('',#401);+#401=CARTESIAN_POINT('',(-6.29,7.,0.85));+#402=LINE('',#394,#49);+#403=ORIENTED_EDGE('',*,*,#404,.T.);+#404=EDGE_CURVE('',#400,#46,#405,.T.);+#405=LINE('',#406,#407);+#406=CARTESIAN_POINT('',(-6.29,7.2,0.85));+#407=VECTOR('',#408,1.);+#408=DIRECTION('',(0.,-1.,0.));+#409=ORIENTED_EDGE('',*,*,#45,.F.);+#410=ORIENTED_EDGE('',*,*,#411,.F.);+#411=EDGE_CURVE('',#412,#40,#414,.T.);+#412=VERTEX_POINT('',#413);+#413=CARTESIAN_POINT('',(-6.925,6.7875,0.85));+#414=LINE('',#413,#396);+#415=ORIENTED_EDGE('',*,*,#416,.F.);+#416=EDGE_CURVE('',#417,#412,#419,.T.);+#417=VERTEX_POINT('',#418);+#418=CARTESIAN_POINT('',(-6.925,6.29,0.85));+#419=LINE('',#420,#421);+#420=CARTESIAN_POINT('',(-6.925,-6.7875,0.85));+#421=VECTOR('',#422,1.);+#422=DIRECTION('',(-1.110223024625E-16,1.,0.));+#423=ORIENTED_EDGE('',*,*,#424,.F.);+#424=EDGE_CURVE('',#425,#417,#427,.T.);+#425=VERTEX_POINT('',#426);+#426=CARTESIAN_POINT('',(-7.,6.29,0.85));+#427=LINE('',#428,#429);+#428=CARTESIAN_POINT('',(-7.2,6.29,0.85));+#429=VECTOR('',#430,1.);+#430=DIRECTION('',(1.,-1.144237745222E-17,0.));+#431=ORIENTED_EDGE('',*,*,#432,.T.);+#432=EDGE_CURVE('',#425,#391,#433,.T.);+#433=LINE('',#434,#421);+#434=CARTESIAN_POINT('',(-7.,-6.825,0.85));+#435=PLANE('',#436);+#436=AXIS2_PLACEMENT_3D('',#437,#438,#439);+#437=CARTESIAN_POINT('',(-7.876734159316E-16,6.9625,0.85));+#438=DIRECTION('',(4.925677741891E-33,-1.412560849569E-27,-1.));+#439=DIRECTION('',(1.,1.0562486726E-16,4.925677741741E-33));+#440=ADVANCED_FACE('',(#441),#462,.F.);+#441=FACE_BOUND('',#442,.F.);+#442=EDGE_LOOP('',(#443,#446,#453,#458,#460,#461));+#443=ORIENTED_EDGE('',*,*,#444,.F.);+#444=EDGE_CURVE('',#445,#400,#405,.T.);+#445=VERTEX_POINT('',#406);+#446=ORIENTED_EDGE('',*,*,#447,.T.);+#447=EDGE_CURVE('',#445,#448,#450,.T.);+#448=VERTEX_POINT('',#449);+#449=CARTESIAN_POINT('',(-6.11,7.2,0.85));+#450=LINE('',#406,#451);+#451=VECTOR('',#452,1.);+#452=DIRECTION('',(1.,0.,0.));+#453=ORIENTED_EDGE('',*,*,#454,.T.);+#454=EDGE_CURVE('',#448,#455,#457,.T.);+#455=VERTEX_POINT('',#456);+#456=CARTESIAN_POINT('',(-6.11,7.,0.85));+#457=LINE('',#449,#407);+#458=ORIENTED_EDGE('',*,*,#459,.T.);+#459=EDGE_CURVE('',#455,#53,#457,.T.);+#460=ORIENTED_EDGE('',*,*,#52,.F.);+#461=ORIENTED_EDGE('',*,*,#404,.F.);+#462=PLANE('',#463);+#463=AXIS2_PLACEMENT_3D('',#406,#464,#408);+#464=DIRECTION('',(0.,0.,-1.));+#465=ADVANCED_FACE('',(#466),#435,.F.);+#466=FACE_BOUND('',#467,.F.);+#467=EDGE_LOOP('',(#468,#469,#473,#477));+#468=ORIENTED_EDGE('',*,*,#459,.F.);+#469=ORIENTED_EDGE('',*,*,#470,.T.);+#470=EDGE_CURVE('',#455,#471,#402,.T.);+#471=VERTEX_POINT('',#472);+#472=CARTESIAN_POINT('',(-5.89,7.,0.85));+#473=ORIENTED_EDGE('',*,*,#474,.T.);+#474=EDGE_CURVE('',#471,#57,#475,.T.);+#475=LINE('',#476,#407);+#476=CARTESIAN_POINT('',(-5.89,7.2,0.85));+#477=ORIENTED_EDGE('',*,*,#56,.F.);+#478=ADVANCED_FACE('',(#479),#498,.F.);+#479=FACE_BOUND('',#480,.F.);+#480=EDGE_LOOP('',(#481,#484,#489,#494,#496,#497));+#481=ORIENTED_EDGE('',*,*,#482,.F.);+#482=EDGE_CURVE('',#483,#471,#475,.T.);+#483=VERTEX_POINT('',#476);+#484=ORIENTED_EDGE('',*,*,#485,.T.);+#485=EDGE_CURVE('',#483,#486,#488,.T.);+#486=VERTEX_POINT('',#487);+#487=CARTESIAN_POINT('',(-5.71,7.2,0.85));+#488=LINE('',#476,#451);+#489=ORIENTED_EDGE('',*,*,#490,.T.);+#490=EDGE_CURVE('',#486,#491,#493,.T.);+#491=VERTEX_POINT('',#492);+#492=CARTESIAN_POINT('',(-5.71,7.,0.85));+#493=LINE('',#487,#407);+#494=ORIENTED_EDGE('',*,*,#495,.T.);+#495=EDGE_CURVE('',#491,#61,#493,.T.);+#496=ORIENTED_EDGE('',*,*,#60,.F.);+#497=ORIENTED_EDGE('',*,*,#474,.F.);+#498=PLANE('',#499);+#499=AXIS2_PLACEMENT_3D('',#476,#464,#408);+#500=ADVANCED_FACE('',(#501),#435,.F.);+#501=FACE_BOUND('',#502,.F.);+#502=EDGE_LOOP('',(#503,#504,#508,#512));+#503=ORIENTED_EDGE('',*,*,#495,.F.);+#504=ORIENTED_EDGE('',*,*,#505,.T.);+#505=EDGE_CURVE('',#491,#506,#402,.T.);+#506=VERTEX_POINT('',#507);+#507=CARTESIAN_POINT('',(-5.49,7.,0.85));+#508=ORIENTED_EDGE('',*,*,#509,.T.);+#509=EDGE_CURVE('',#506,#65,#510,.T.);+#510=LINE('',#511,#407);+#511=CARTESIAN_POINT('',(-5.49,7.2,0.85));+#512=ORIENTED_EDGE('',*,*,#64,.F.);+#513=ADVANCED_FACE('',(#514),#533,.F.);+#514=FACE_BOUND('',#515,.F.);+#515=EDGE_LOOP('',(#516,#519,#524,#529,#531,#532));+#516=ORIENTED_EDGE('',*,*,#517,.F.);+#517=EDGE_CURVE('',#518,#506,#510,.T.);+#518=VERTEX_POINT('',#511);+#519=ORIENTED_EDGE('',*,*,#520,.T.);+#520=EDGE_CURVE('',#518,#521,#523,.T.);+#521=VERTEX_POINT('',#522);+#522=CARTESIAN_POINT('',(-5.31,7.2,0.85));+#523=LINE('',#511,#451);+#524=ORIENTED_EDGE('',*,*,#525,.T.);+#525=EDGE_CURVE('',#521,#526,#528,.T.);+#526=VERTEX_POINT('',#527);+#527=CARTESIAN_POINT('',(-5.31,7.,0.85));+#528=LINE('',#522,#407);+#529=ORIENTED_EDGE('',*,*,#530,.T.);+#530=EDGE_CURVE('',#526,#69,#528,.T.);+#531=ORIENTED_EDGE('',*,*,#68,.F.);+#532=ORIENTED_EDGE('',*,*,#509,.F.);+#533=PLANE('',#534);+#534=AXIS2_PLACEMENT_3D('',#511,#464,#408);+#535=ADVANCED_FACE('',(#536),#435,.F.);+#536=FACE_BOUND('',#537,.F.);+#537=EDGE_LOOP('',(#538,#539,#543,#547));+#538=ORIENTED_EDGE('',*,*,#530,.F.);+#539=ORIENTED_EDGE('',*,*,#540,.T.);+#540=EDGE_CURVE('',#526,#541,#402,.T.);+#541=VERTEX_POINT('',#542);+#542=CARTESIAN_POINT('',(-5.09,7.,0.85));+#543=ORIENTED_EDGE('',*,*,#544,.T.);+#544=EDGE_CURVE('',#541,#73,#545,.T.);+#545=LINE('',#546,#407);+#546=CARTESIAN_POINT('',(-5.09,7.2,0.85));+#547=ORIENTED_EDGE('',*,*,#72,.F.);+#548=ADVANCED_FACE('',(#549),#568,.F.);+#549=FACE_BOUND('',#550,.F.);+#550=EDGE_LOOP('',(#551,#554,#559,#564,#566,#567));+#551=ORIENTED_EDGE('',*,*,#552,.F.);+#552=EDGE_CURVE('',#553,#541,#545,.T.);+#553=VERTEX_POINT('',#546);+#554=ORIENTED_EDGE('',*,*,#555,.T.);+#555=EDGE_CURVE('',#553,#556,#558,.T.);+#556=VERTEX_POINT('',#557);+#557=CARTESIAN_POINT('',(-4.91,7.2,0.85));+#558=LINE('',#546,#451);+#559=ORIENTED_EDGE('',*,*,#560,.T.);+#560=EDGE_CURVE('',#556,#561,#563,.T.);+#561=VERTEX_POINT('',#562);+#562=CARTESIAN_POINT('',(-4.91,7.,0.85));+#563=LINE('',#557,#407);+#564=ORIENTED_EDGE('',*,*,#565,.T.);+#565=EDGE_CURVE('',#561,#77,#563,.T.);+#566=ORIENTED_EDGE('',*,*,#76,.F.);+#567=ORIENTED_EDGE('',*,*,#544,.F.);+#568=PLANE('',#569);+#569=AXIS2_PLACEMENT_3D('',#546,#464,#408);+#570=ADVANCED_FACE('',(#571),#435,.F.);+#571=FACE_BOUND('',#572,.F.);+#572=EDGE_LOOP('',(#573,#574,#578,#582));+#573=ORIENTED_EDGE('',*,*,#565,.F.);+#574=ORIENTED_EDGE('',*,*,#575,.T.);+#575=EDGE_CURVE('',#561,#576,#402,.T.);+#576=VERTEX_POINT('',#577);+#577=CARTESIAN_POINT('',(-4.69,7.,0.85));+#578=ORIENTED_EDGE('',*,*,#579,.T.);+#579=EDGE_CURVE('',#576,#81,#580,.T.);+#580=LINE('',#581,#407);+#581=CARTESIAN_POINT('',(-4.69,7.2,0.85));+#582=ORIENTED_EDGE('',*,*,#80,.F.);+#583=ADVANCED_FACE('',(#584),#603,.F.);+#584=FACE_BOUND('',#585,.F.);+#585=EDGE_LOOP('',(#586,#589,#594,#599,#601,#602));+#586=ORIENTED_EDGE('',*,*,#587,.F.);+#587=EDGE_CURVE('',#588,#576,#580,.T.);+#588=VERTEX_POINT('',#581);+#589=ORIENTED_EDGE('',*,*,#590,.T.);+#590=EDGE_CURVE('',#588,#591,#593,.T.);+#591=VERTEX_POINT('',#592);+#592=CARTESIAN_POINT('',(-4.51,7.2,0.85));+#593=LINE('',#581,#451);+#594=ORIENTED_EDGE('',*,*,#595,.T.);+#595=EDGE_CURVE('',#591,#596,#598,.T.);+#596=VERTEX_POINT('',#597);+#597=CARTESIAN_POINT('',(-4.51,7.,0.85));+#598=LINE('',#592,#407);+#599=ORIENTED_EDGE('',*,*,#600,.T.);+#600=EDGE_CURVE('',#596,#85,#598,.T.);+#601=ORIENTED_EDGE('',*,*,#84,.F.);+#602=ORIENTED_EDGE('',*,*,#579,.F.);+#603=PLANE('',#604);+#604=AXIS2_PLACEMENT_3D('',#581,#464,#408);+#605=ADVANCED_FACE('',(#606),#435,.F.);+#606=FACE_BOUND('',#607,.F.);+#607=EDGE_LOOP('',(#608,#609,#613,#617));+#608=ORIENTED_EDGE('',*,*,#600,.F.);+#609=ORIENTED_EDGE('',*,*,#610,.T.);+#610=EDGE_CURVE('',#596,#611,#402,.T.);+#611=VERTEX_POINT('',#612);+#612=CARTESIAN_POINT('',(-4.29,7.,0.85));+#613=ORIENTED_EDGE('',*,*,#614,.T.);+#614=EDGE_CURVE('',#611,#89,#615,.T.);+#615=LINE('',#616,#407);+#616=CARTESIAN_POINT('',(-4.29,7.2,0.85));+#617=ORIENTED_EDGE('',*,*,#88,.F.);+#618=ADVANCED_FACE('',(#619),#638,.F.);+#619=FACE_BOUND('',#620,.F.);+#620=EDGE_LOOP('',(#621,#624,#629,#634,#636,#637));+#621=ORIENTED_EDGE('',*,*,#622,.F.);+#622=EDGE_CURVE('',#623,#611,#615,.T.);+#623=VERTEX_POINT('',#616);+#624=ORIENTED_EDGE('',*,*,#625,.T.);+#625=EDGE_CURVE('',#623,#626,#628,.T.);+#626=VERTEX_POINT('',#627);+#627=CARTESIAN_POINT('',(-4.11,7.2,0.85));+#628=LINE('',#616,#451);+#629=ORIENTED_EDGE('',*,*,#630,.T.);+#630=EDGE_CURVE('',#626,#631,#633,.T.);+#631=VERTEX_POINT('',#632);+#632=CARTESIAN_POINT('',(-4.11,7.,0.85));+#633=LINE('',#627,#407);+#634=ORIENTED_EDGE('',*,*,#635,.T.);+#635=EDGE_CURVE('',#631,#93,#633,.T.);+#636=ORIENTED_EDGE('',*,*,#92,.F.);+#637=ORIENTED_EDGE('',*,*,#614,.F.);+#638=PLANE('',#639);+#639=AXIS2_PLACEMENT_3D('',#616,#464,#408);+#640=ADVANCED_FACE('',(#641),#435,.F.);+#641=FACE_BOUND('',#642,.F.);+#642=EDGE_LOOP('',(#643,#644,#648,#652));+#643=ORIENTED_EDGE('',*,*,#635,.F.);+#644=ORIENTED_EDGE('',*,*,#645,.T.);+#645=EDGE_CURVE('',#631,#646,#402,.T.);+#646=VERTEX_POINT('',#647);+#647=CARTESIAN_POINT('',(-3.89,7.,0.85));+#648=ORIENTED_EDGE('',*,*,#649,.T.);+#649=EDGE_CURVE('',#646,#97,#650,.T.);+#650=LINE('',#651,#407);+#651=CARTESIAN_POINT('',(-3.89,7.2,0.85));+#652=ORIENTED_EDGE('',*,*,#96,.F.);+#653=ADVANCED_FACE('',(#654),#673,.F.);+#654=FACE_BOUND('',#655,.F.);+#655=EDGE_LOOP('',(#656,#659,#664,#669,#671,#672));+#656=ORIENTED_EDGE('',*,*,#657,.F.);+#657=EDGE_CURVE('',#658,#646,#650,.T.);+#658=VERTEX_POINT('',#651);+#659=ORIENTED_EDGE('',*,*,#660,.T.);+#660=EDGE_CURVE('',#658,#661,#663,.T.);+#661=VERTEX_POINT('',#662);+#662=CARTESIAN_POINT('',(-3.71,7.2,0.85));+#663=LINE('',#651,#451);+#664=ORIENTED_EDGE('',*,*,#665,.T.);+#665=EDGE_CURVE('',#661,#666,#668,.T.);+#666=VERTEX_POINT('',#667);+#667=CARTESIAN_POINT('',(-3.71,7.,0.85));+#668=LINE('',#662,#407);+#669=ORIENTED_EDGE('',*,*,#670,.T.);+#670=EDGE_CURVE('',#666,#101,#668,.T.);+#671=ORIENTED_EDGE('',*,*,#100,.F.);+#672=ORIENTED_EDGE('',*,*,#649,.F.);+#673=PLANE('',#674);+#674=AXIS2_PLACEMENT_3D('',#651,#464,#408);+#675=ADVANCED_FACE('',(#676),#435,.F.);+#676=FACE_BOUND('',#677,.F.);+#677=EDGE_LOOP('',(#678,#679,#683,#687));+#678=ORIENTED_EDGE('',*,*,#670,.F.);+#679=ORIENTED_EDGE('',*,*,#680,.T.);+#680=EDGE_CURVE('',#666,#681,#402,.T.);+#681=VERTEX_POINT('',#682);+#682=CARTESIAN_POINT('',(-3.49,7.,0.85));+#683=ORIENTED_EDGE('',*,*,#684,.T.);+#684=EDGE_CURVE('',#681,#105,#685,.T.);+#685=LINE('',#686,#407);+#686=CARTESIAN_POINT('',(-3.49,7.2,0.85));+#687=ORIENTED_EDGE('',*,*,#104,.F.);+#688=ADVANCED_FACE('',(#689),#708,.F.);+#689=FACE_BOUND('',#690,.F.);+#690=EDGE_LOOP('',(#691,#694,#699,#704,#706,#707));+#691=ORIENTED_EDGE('',*,*,#692,.F.);+#692=EDGE_CURVE('',#693,#681,#685,.T.);+#693=VERTEX_POINT('',#686);+#694=ORIENTED_EDGE('',*,*,#695,.T.);+#695=EDGE_CURVE('',#693,#696,#698,.T.);+#696=VERTEX_POINT('',#697);+#697=CARTESIAN_POINT('',(-3.31,7.2,0.85));+#698=LINE('',#686,#451);+#699=ORIENTED_EDGE('',*,*,#700,.T.);+#700=EDGE_CURVE('',#696,#701,#703,.T.);+#701=VERTEX_POINT('',#702);+#702=CARTESIAN_POINT('',(-3.31,7.,0.85));+#703=LINE('',#697,#407);+#704=ORIENTED_EDGE('',*,*,#705,.T.);+#705=EDGE_CURVE('',#701,#109,#703,.T.);+#706=ORIENTED_EDGE('',*,*,#108,.F.);+#707=ORIENTED_EDGE('',*,*,#684,.F.);+#708=PLANE('',#709);+#709=AXIS2_PLACEMENT_3D('',#686,#464,#408);+#710=ADVANCED_FACE('',(#711),#435,.F.);+#711=FACE_BOUND('',#712,.F.);+#712=EDGE_LOOP('',(#713,#714,#718,#722));+#713=ORIENTED_EDGE('',*,*,#705,.F.);+#714=ORIENTED_EDGE('',*,*,#715,.T.);+#715=EDGE_CURVE('',#701,#716,#402,.T.);+#716=VERTEX_POINT('',#717);+#717=CARTESIAN_POINT('',(-3.09,7.,0.85));+#718=ORIENTED_EDGE('',*,*,#719,.T.);+#719=EDGE_CURVE('',#716,#113,#720,.T.);+#720=LINE('',#721,#407);+#721=CARTESIAN_POINT('',(-3.09,7.2,0.85));+#722=ORIENTED_EDGE('',*,*,#112,.F.);+#723=ADVANCED_FACE('',(#724),#743,.F.);+#724=FACE_BOUND('',#725,.F.);+#725=EDGE_LOOP('',(#726,#729,#734,#739,#741,#742));+#726=ORIENTED_EDGE('',*,*,#727,.F.);+#727=EDGE_CURVE('',#728,#716,#720,.T.);+#728=VERTEX_POINT('',#721);+#729=ORIENTED_EDGE('',*,*,#730,.T.);+#730=EDGE_CURVE('',#728,#731,#733,.T.);+#731=VERTEX_POINT('',#732);+#732=CARTESIAN_POINT('',(-2.91,7.2,0.85));+#733=LINE('',#721,#451);+#734=ORIENTED_EDGE('',*,*,#735,.T.);+#735=EDGE_CURVE('',#731,#736,#738,.T.);+#736=VERTEX_POINT('',#737);+#737=CARTESIAN_POINT('',(-2.91,7.,0.85));+#738=LINE('',#732,#407);+#739=ORIENTED_EDGE('',*,*,#740,.T.);+#740=EDGE_CURVE('',#736,#117,#738,.T.);+#741=ORIENTED_EDGE('',*,*,#116,.F.);+#742=ORIENTED_EDGE('',*,*,#719,.F.);+#743=PLANE('',#744);+#744=AXIS2_PLACEMENT_3D('',#721,#464,#408);+#745=ADVANCED_FACE('',(#746),#435,.F.);+#746=FACE_BOUND('',#747,.F.);+#747=EDGE_LOOP('',(#748,#749,#753,#757));+#748=ORIENTED_EDGE('',*,*,#740,.F.);+#749=ORIENTED_EDGE('',*,*,#750,.T.);+#750=EDGE_CURVE('',#736,#751,#402,.T.);+#751=VERTEX_POINT('',#752);+#752=CARTESIAN_POINT('',(-2.69,7.,0.85));+#753=ORIENTED_EDGE('',*,*,#754,.T.);+#754=EDGE_CURVE('',#751,#121,#755,.T.);+#755=LINE('',#756,#407);+#756=CARTESIAN_POINT('',(-2.69,7.2,0.85));+#757=ORIENTED_EDGE('',*,*,#120,.F.);+#758=ADVANCED_FACE('',(#759),#778,.F.);+#759=FACE_BOUND('',#760,.F.);+#760=EDGE_LOOP('',(#761,#764,#769,#774,#776,#777));+#761=ORIENTED_EDGE('',*,*,#762,.F.);+#762=EDGE_CURVE('',#763,#751,#755,.T.);+#763=VERTEX_POINT('',#756);+#764=ORIENTED_EDGE('',*,*,#765,.T.);+#765=EDGE_CURVE('',#763,#766,#768,.T.);+#766=VERTEX_POINT('',#767);+#767=CARTESIAN_POINT('',(-2.51,7.2,0.85));+#768=LINE('',#756,#451);+#769=ORIENTED_EDGE('',*,*,#770,.T.);+#770=EDGE_CURVE('',#766,#771,#773,.T.);+#771=VERTEX_POINT('',#772);+#772=CARTESIAN_POINT('',(-2.51,7.,0.85));+#773=LINE('',#767,#407);+#774=ORIENTED_EDGE('',*,*,#775,.T.);+#775=EDGE_CURVE('',#771,#125,#773,.T.);+#776=ORIENTED_EDGE('',*,*,#124,.F.);+#777=ORIENTED_EDGE('',*,*,#754,.F.);+#778=PLANE('',#779);+#779=AXIS2_PLACEMENT_3D('',#756,#464,#408);+#780=ADVANCED_FACE('',(#781),#435,.F.);+#781=FACE_BOUND('',#782,.F.);+#782=EDGE_LOOP('',(#783,#784,#788,#792));+#783=ORIENTED_EDGE('',*,*,#775,.F.);+#784=ORIENTED_EDGE('',*,*,#785,.T.);+#785=EDGE_CURVE('',#771,#786,#402,.T.);+#786=VERTEX_POINT('',#787);+#787=CARTESIAN_POINT('',(-2.29,7.,0.85));+#788=ORIENTED_EDGE('',*,*,#789,.T.);+#789=EDGE_CURVE('',#786,#129,#790,.T.);+#790=LINE('',#791,#407);+#791=CARTESIAN_POINT('',(-2.29,7.2,0.85));+#792=ORIENTED_EDGE('',*,*,#128,.F.);+#793=ADVANCED_FACE('',(#794),#813,.F.);+#794=FACE_BOUND('',#795,.F.);+#795=EDGE_LOOP('',(#796,#799,#804,#809,#811,#812));+#796=ORIENTED_EDGE('',*,*,#797,.F.);+#797=EDGE_CURVE('',#798,#786,#790,.T.);+#798=VERTEX_POINT('',#791);+#799=ORIENTED_EDGE('',*,*,#800,.T.);+#800=EDGE_CURVE('',#798,#801,#803,.T.);+#801=VERTEX_POINT('',#802);+#802=CARTESIAN_POINT('',(-2.11,7.2,0.85));+#803=LINE('',#791,#451);+#804=ORIENTED_EDGE('',*,*,#805,.T.);+#805=EDGE_CURVE('',#801,#806,#808,.T.);+#806=VERTEX_POINT('',#807);+#807=CARTESIAN_POINT('',(-2.11,7.,0.85));+#808=LINE('',#802,#407);+#809=ORIENTED_EDGE('',*,*,#810,.T.);+#810=EDGE_CURVE('',#806,#133,#808,.T.);+#811=ORIENTED_EDGE('',*,*,#132,.F.);+#812=ORIENTED_EDGE('',*,*,#789,.F.);+#813=PLANE('',#814);+#814=AXIS2_PLACEMENT_3D('',#791,#464,#408);+#815=ADVANCED_FACE('',(#816),#435,.F.);+#816=FACE_BOUND('',#817,.F.);+#817=EDGE_LOOP('',(#818,#819,#823,#827));+#818=ORIENTED_EDGE('',*,*,#810,.F.);+#819=ORIENTED_EDGE('',*,*,#820,.T.);+#820=EDGE_CURVE('',#806,#821,#402,.T.);+#821=VERTEX_POINT('',#822);+#822=CARTESIAN_POINT('',(-1.89,7.,0.85));+#823=ORIENTED_EDGE('',*,*,#824,.T.);+#824=EDGE_CURVE('',#821,#137,#825,.T.);+#825=LINE('',#826,#407);+#826=CARTESIAN_POINT('',(-1.89,7.2,0.85));+#827=ORIENTED_EDGE('',*,*,#136,.F.);+#828=ADVANCED_FACE('',(#829),#848,.F.);+#829=FACE_BOUND('',#830,.F.);+#830=EDGE_LOOP('',(#831,#834,#839,#844,#846,#847));+#831=ORIENTED_EDGE('',*,*,#832,.F.);+#832=EDGE_CURVE('',#833,#821,#825,.T.);+#833=VERTEX_POINT('',#826);+#834=ORIENTED_EDGE('',*,*,#835,.T.);+#835=EDGE_CURVE('',#833,#836,#838,.T.);+#836=VERTEX_POINT('',#837);+#837=CARTESIAN_POINT('',(-1.71,7.2,0.85));+#838=LINE('',#826,#451);+#839=ORIENTED_EDGE('',*,*,#840,.T.);+#840=EDGE_CURVE('',#836,#841,#843,.T.);+#841=VERTEX_POINT('',#842);+#842=CARTESIAN_POINT('',(-1.71,7.,0.85));+#843=LINE('',#837,#407);+#844=ORIENTED_EDGE('',*,*,#845,.T.);+#845=EDGE_CURVE('',#841,#141,#843,.T.);+#846=ORIENTED_EDGE('',*,*,#140,.F.);+#847=ORIENTED_EDGE('',*,*,#824,.F.);+#848=PLANE('',#849);+#849=AXIS2_PLACEMENT_3D('',#826,#464,#408);+#850=ADVANCED_FACE('',(#851),#435,.F.);+#851=FACE_BOUND('',#852,.F.);+#852=EDGE_LOOP('',(#853,#854,#858,#862));+#853=ORIENTED_EDGE('',*,*,#845,.F.);+#854=ORIENTED_EDGE('',*,*,#855,.T.);+#855=EDGE_CURVE('',#841,#856,#402,.T.);+#856=VERTEX_POINT('',#857);+#857=CARTESIAN_POINT('',(-1.49,7.,0.85));+#858=ORIENTED_EDGE('',*,*,#859,.T.);+#859=EDGE_CURVE('',#856,#145,#860,.T.);+#860=LINE('',#861,#407);+#861=CARTESIAN_POINT('',(-1.49,7.2,0.85));+#862=ORIENTED_EDGE('',*,*,#144,.F.);+#863=ADVANCED_FACE('',(#864),#883,.F.);+#864=FACE_BOUND('',#865,.F.);+#865=EDGE_LOOP('',(#866,#869,#874,#879,#881,#882));+#866=ORIENTED_EDGE('',*,*,#867,.F.);+#867=EDGE_CURVE('',#868,#856,#860,.T.);+#868=VERTEX_POINT('',#861);+#869=ORIENTED_EDGE('',*,*,#870,.T.);+#870=EDGE_CURVE('',#868,#871,#873,.T.);+#871=VERTEX_POINT('',#872);+#872=CARTESIAN_POINT('',(-1.31,7.2,0.85));+#873=LINE('',#861,#451);+#874=ORIENTED_EDGE('',*,*,#875,.T.);+#875=EDGE_CURVE('',#871,#876,#878,.T.);+#876=VERTEX_POINT('',#877);+#877=CARTESIAN_POINT('',(-1.31,7.,0.85));+#878=LINE('',#872,#407);+#879=ORIENTED_EDGE('',*,*,#880,.T.);+#880=EDGE_CURVE('',#876,#149,#878,.T.);+#881=ORIENTED_EDGE('',*,*,#148,.F.);+#882=ORIENTED_EDGE('',*,*,#859,.F.);+#883=PLANE('',#884);+#884=AXIS2_PLACEMENT_3D('',#861,#464,#408);+#885=ADVANCED_FACE('',(#886),#435,.F.);+#886=FACE_BOUND('',#887,.F.);+#887=EDGE_LOOP('',(#888,#889,#893,#897));+#888=ORIENTED_EDGE('',*,*,#880,.F.);+#889=ORIENTED_EDGE('',*,*,#890,.T.);+#890=EDGE_CURVE('',#876,#891,#402,.T.);+#891=VERTEX_POINT('',#892);+#892=CARTESIAN_POINT('',(-1.09,7.,0.85));+#893=ORIENTED_EDGE('',*,*,#894,.T.);+#894=EDGE_CURVE('',#891,#153,#895,.T.);+#895=LINE('',#896,#407);+#896=CARTESIAN_POINT('',(-1.09,7.2,0.85));+#897=ORIENTED_EDGE('',*,*,#152,.F.);+#898=ADVANCED_FACE('',(#899),#918,.F.);+#899=FACE_BOUND('',#900,.F.);+#900=EDGE_LOOP('',(#901,#904,#909,#914,#916,#917));+#901=ORIENTED_EDGE('',*,*,#902,.F.);+#902=EDGE_CURVE('',#903,#891,#895,.T.);+#903=VERTEX_POINT('',#896);+#904=ORIENTED_EDGE('',*,*,#905,.T.);+#905=EDGE_CURVE('',#903,#906,#908,.T.);+#906=VERTEX_POINT('',#907);+#907=CARTESIAN_POINT('',(-0.91,7.2,0.85));+#908=LINE('',#896,#451);+#909=ORIENTED_EDGE('',*,*,#910,.T.);+#910=EDGE_CURVE('',#906,#911,#913,.T.);+#911=VERTEX_POINT('',#912);+#912=CARTESIAN_POINT('',(-0.91,7.,0.85));+#913=LINE('',#907,#407);+#914=ORIENTED_EDGE('',*,*,#915,.T.);+#915=EDGE_CURVE('',#911,#157,#913,.T.);+#916=ORIENTED_EDGE('',*,*,#156,.F.);+#917=ORIENTED_EDGE('',*,*,#894,.F.);+#918=PLANE('',#919);+#919=AXIS2_PLACEMENT_3D('',#896,#464,#408);+#920=ADVANCED_FACE('',(#921),#435,.F.);+#921=FACE_BOUND('',#922,.F.);+#922=EDGE_LOOP('',(#923,#924,#928,#932));+#923=ORIENTED_EDGE('',*,*,#915,.F.);+#924=ORIENTED_EDGE('',*,*,#925,.T.);+#925=EDGE_CURVE('',#911,#926,#402,.T.);+#926=VERTEX_POINT('',#927);+#927=CARTESIAN_POINT('',(-0.69,7.,0.85));+#928=ORIENTED_EDGE('',*,*,#929,.T.);+#929=EDGE_CURVE('',#926,#161,#930,.T.);+#930=LINE('',#931,#407);+#931=CARTESIAN_POINT('',(-0.69,7.2,0.85));+#932=ORIENTED_EDGE('',*,*,#160,.F.);+#933=ADVANCED_FACE('',(#934),#953,.F.);+#934=FACE_BOUND('',#935,.F.);+#935=EDGE_LOOP('',(#936,#939,#944,#949,#951,#952));+#936=ORIENTED_EDGE('',*,*,#937,.F.);+#937=EDGE_CURVE('',#938,#926,#930,.T.);+#938=VERTEX_POINT('',#931);+#939=ORIENTED_EDGE('',*,*,#940,.T.);+#940=EDGE_CURVE('',#938,#941,#943,.T.);+#941=VERTEX_POINT('',#942);+#942=CARTESIAN_POINT('',(-0.51,7.2,0.85));+#943=LINE('',#931,#451);+#944=ORIENTED_EDGE('',*,*,#945,.T.);+#945=EDGE_CURVE('',#941,#946,#948,.T.);+#946=VERTEX_POINT('',#947);+#947=CARTESIAN_POINT('',(-0.51,7.,0.85));+#948=LINE('',#942,#407);+#949=ORIENTED_EDGE('',*,*,#950,.T.);+#950=EDGE_CURVE('',#946,#165,#948,.T.);+#951=ORIENTED_EDGE('',*,*,#164,.F.);+#952=ORIENTED_EDGE('',*,*,#929,.F.);+#953=PLANE('',#954);+#954=AXIS2_PLACEMENT_3D('',#931,#464,#408);+#955=ADVANCED_FACE('',(#956),#435,.F.);+#956=FACE_BOUND('',#957,.F.);+#957=EDGE_LOOP('',(#958,#959,#963,#967));+#958=ORIENTED_EDGE('',*,*,#950,.F.);+#959=ORIENTED_EDGE('',*,*,#960,.T.);+#960=EDGE_CURVE('',#946,#961,#402,.T.);+#961=VERTEX_POINT('',#962);+#962=CARTESIAN_POINT('',(-0.29,7.,0.85));+#963=ORIENTED_EDGE('',*,*,#964,.T.);+#964=EDGE_CURVE('',#961,#169,#965,.T.);+#965=LINE('',#966,#407);+#966=CARTESIAN_POINT('',(-0.29,7.2,0.85));+#967=ORIENTED_EDGE('',*,*,#168,.F.);+#968=ADVANCED_FACE('',(#969),#988,.F.);+#969=FACE_BOUND('',#970,.F.);+#970=EDGE_LOOP('',(#971,#974,#979,#984,#986,#987));+#971=ORIENTED_EDGE('',*,*,#972,.F.);+#972=EDGE_CURVE('',#973,#961,#965,.T.);+#973=VERTEX_POINT('',#966);+#974=ORIENTED_EDGE('',*,*,#975,.T.);+#975=EDGE_CURVE('',#973,#976,#978,.T.);+#976=VERTEX_POINT('',#977);+#977=CARTESIAN_POINT('',(-0.11,7.2,0.85));+#978=LINE('',#966,#451);+#979=ORIENTED_EDGE('',*,*,#980,.T.);+#980=EDGE_CURVE('',#976,#981,#983,.T.);+#981=VERTEX_POINT('',#982);+#982=CARTESIAN_POINT('',(-0.11,7.,0.85));+#983=LINE('',#977,#407);+#984=ORIENTED_EDGE('',*,*,#985,.T.);+#985=EDGE_CURVE('',#981,#173,#983,.T.);+#986=ORIENTED_EDGE('',*,*,#172,.F.);+#987=ORIENTED_EDGE('',*,*,#964,.F.);+#988=PLANE('',#989);+#989=AXIS2_PLACEMENT_3D('',#966,#464,#408);+#990=ADVANCED_FACE('',(#991),#435,.F.);+#991=FACE_BOUND('',#992,.F.);+#992=EDGE_LOOP('',(#993,#994,#998,#1002));+#993=ORIENTED_EDGE('',*,*,#985,.F.);+#994=ORIENTED_EDGE('',*,*,#995,.T.);+#995=EDGE_CURVE('',#981,#996,#402,.T.);+#996=VERTEX_POINT('',#997);+#997=CARTESIAN_POINT('',(0.11,7.,0.85));+#998=ORIENTED_EDGE('',*,*,#999,.T.);+#999=EDGE_CURVE('',#996,#177,#1000,.T.);+#1000=LINE('',#1001,#407);+#1001=CARTESIAN_POINT('',(0.11,7.2,0.85));+#1002=ORIENTED_EDGE('',*,*,#176,.F.);+#1003=ADVANCED_FACE('',(#1004),#1023,.F.);+#1004=FACE_BOUND('',#1005,.F.);+#1005=EDGE_LOOP('',(#1006,#1009,#1014,#1019,#1021,#1022));+#1006=ORIENTED_EDGE('',*,*,#1007,.F.);+#1007=EDGE_CURVE('',#1008,#996,#1000,.T.);+#1008=VERTEX_POINT('',#1001);+#1009=ORIENTED_EDGE('',*,*,#1010,.T.);+#1010=EDGE_CURVE('',#1008,#1011,#1013,.T.);+#1011=VERTEX_POINT('',#1012);+#1012=CARTESIAN_POINT('',(0.29,7.2,0.85));+#1013=LINE('',#1001,#451);+#1014=ORIENTED_EDGE('',*,*,#1015,.T.);+#1015=EDGE_CURVE('',#1011,#1016,#1018,.T.);+#1016=VERTEX_POINT('',#1017);+#1017=CARTESIAN_POINT('',(0.29,7.,0.85));+#1018=LINE('',#1012,#407);+#1019=ORIENTED_EDGE('',*,*,#1020,.T.);+#1020=EDGE_CURVE('',#1016,#181,#1018,.T.);+#1021=ORIENTED_EDGE('',*,*,#180,.F.);+#1022=ORIENTED_EDGE('',*,*,#999,.F.);+#1023=PLANE('',#1024);+#1024=AXIS2_PLACEMENT_3D('',#1001,#464,#408);+#1025=ADVANCED_FACE('',(#1026),#435,.F.);+#1026=FACE_BOUND('',#1027,.F.);+#1027=EDGE_LOOP('',(#1028,#1029,#1033,#1037));+#1028=ORIENTED_EDGE('',*,*,#1020,.F.);+#1029=ORIENTED_EDGE('',*,*,#1030,.T.);+#1030=EDGE_CURVE('',#1016,#1031,#402,.T.);+#1031=VERTEX_POINT('',#1032);+#1032=CARTESIAN_POINT('',(0.51,7.,0.85));+#1033=ORIENTED_EDGE('',*,*,#1034,.T.);+#1034=EDGE_CURVE('',#1031,#185,#1035,.T.);+#1035=LINE('',#1036,#407);+#1036=CARTESIAN_POINT('',(0.51,7.2,0.85));+#1037=ORIENTED_EDGE('',*,*,#184,.F.);+#1038=ADVANCED_FACE('',(#1039),#1058,.F.);+#1039=FACE_BOUND('',#1040,.F.);+#1040=EDGE_LOOP('',(#1041,#1044,#1049,#1054,#1056,#1057));+#1041=ORIENTED_EDGE('',*,*,#1042,.F.);+#1042=EDGE_CURVE('',#1043,#1031,#1035,.T.);+#1043=VERTEX_POINT('',#1036);+#1044=ORIENTED_EDGE('',*,*,#1045,.T.);+#1045=EDGE_CURVE('',#1043,#1046,#1048,.T.);+#1046=VERTEX_POINT('',#1047);+#1047=CARTESIAN_POINT('',(0.69,7.2,0.85));+#1048=LINE('',#1036,#451);+#1049=ORIENTED_EDGE('',*,*,#1050,.T.);+#1050=EDGE_CURVE('',#1046,#1051,#1053,.T.);+#1051=VERTEX_POINT('',#1052);+#1052=CARTESIAN_POINT('',(0.69,7.,0.85));+#1053=LINE('',#1047,#407);+#1054=ORIENTED_EDGE('',*,*,#1055,.T.);+#1055=EDGE_CURVE('',#1051,#189,#1053,.T.);+#1056=ORIENTED_EDGE('',*,*,#188,.F.);+#1057=ORIENTED_EDGE('',*,*,#1034,.F.);+#1058=PLANE('',#1059);+#1059=AXIS2_PLACEMENT_3D('',#1036,#464,#408);+#1060=ADVANCED_FACE('',(#1061),#435,.F.);+#1061=FACE_BOUND('',#1062,.F.);+#1062=EDGE_LOOP('',(#1063,#1064,#1068,#1072));+#1063=ORIENTED_EDGE('',*,*,#1055,.F.);+#1064=ORIENTED_EDGE('',*,*,#1065,.T.);+#1065=EDGE_CURVE('',#1051,#1066,#402,.T.);+#1066=VERTEX_POINT('',#1067);+#1067=CARTESIAN_POINT('',(0.91,7.,0.85));+#1068=ORIENTED_EDGE('',*,*,#1069,.T.);+#1069=EDGE_CURVE('',#1066,#193,#1070,.T.);+#1070=LINE('',#1071,#407);+#1071=CARTESIAN_POINT('',(0.91,7.2,0.85));+#1072=ORIENTED_EDGE('',*,*,#192,.F.);+#1073=ADVANCED_FACE('',(#1074),#1093,.F.);+#1074=FACE_BOUND('',#1075,.F.);+#1075=EDGE_LOOP('',(#1076,#1079,#1084,#1089,#1091,#1092));+#1076=ORIENTED_EDGE('',*,*,#1077,.F.);+#1077=EDGE_CURVE('',#1078,#1066,#1070,.T.);+#1078=VERTEX_POINT('',#1071);+#1079=ORIENTED_EDGE('',*,*,#1080,.T.);+#1080=EDGE_CURVE('',#1078,#1081,#1083,.T.);+#1081=VERTEX_POINT('',#1082);+#1082=CARTESIAN_POINT('',(1.09,7.2,0.85));+#1083=LINE('',#1071,#451);+#1084=ORIENTED_EDGE('',*,*,#1085,.T.);+#1085=EDGE_CURVE('',#1081,#1086,#1088,.T.);+#1086=VERTEX_POINT('',#1087);+#1087=CARTESIAN_POINT('',(1.09,7.,0.85));+#1088=LINE('',#1082,#407);+#1089=ORIENTED_EDGE('',*,*,#1090,.T.);+#1090=EDGE_CURVE('',#1086,#197,#1088,.T.);+#1091=ORIENTED_EDGE('',*,*,#196,.F.);+#1092=ORIENTED_EDGE('',*,*,#1069,.F.);+#1093=PLANE('',#1094);+#1094=AXIS2_PLACEMENT_3D('',#1071,#464,#408);+#1095=ADVANCED_FACE('',(#1096),#435,.F.);+#1096=FACE_BOUND('',#1097,.F.);+#1097=EDGE_LOOP('',(#1098,#1099,#1103,#1107));+#1098=ORIENTED_EDGE('',*,*,#1090,.F.);+#1099=ORIENTED_EDGE('',*,*,#1100,.T.);+#1100=EDGE_CURVE('',#1086,#1101,#402,.T.);+#1101=VERTEX_POINT('',#1102);+#1102=CARTESIAN_POINT('',(1.31,7.,0.85));+#1103=ORIENTED_EDGE('',*,*,#1104,.T.);+#1104=EDGE_CURVE('',#1101,#201,#1105,.T.);+#1105=LINE('',#1106,#407);+#1106=CARTESIAN_POINT('',(1.31,7.2,0.85));+#1107=ORIENTED_EDGE('',*,*,#200,.F.);+#1108=ADVANCED_FACE('',(#1109),#1128,.F.);+#1109=FACE_BOUND('',#1110,.F.);+#1110=EDGE_LOOP('',(#1111,#1114,#1119,#1124,#1126,#1127));+#1111=ORIENTED_EDGE('',*,*,#1112,.F.);+#1112=EDGE_CURVE('',#1113,#1101,#1105,.T.);+#1113=VERTEX_POINT('',#1106);+#1114=ORIENTED_EDGE('',*,*,#1115,.T.);+#1115=EDGE_CURVE('',#1113,#1116,#1118,.T.);+#1116=VERTEX_POINT('',#1117);+#1117=CARTESIAN_POINT('',(1.49,7.2,0.85));+#1118=LINE('',#1106,#451);+#1119=ORIENTED_EDGE('',*,*,#1120,.T.);+#1120=EDGE_CURVE('',#1116,#1121,#1123,.T.);+#1121=VERTEX_POINT('',#1122);+#1122=CARTESIAN_POINT('',(1.49,7.,0.85));+#1123=LINE('',#1117,#407);+#1124=ORIENTED_EDGE('',*,*,#1125,.T.);+#1125=EDGE_CURVE('',#1121,#205,#1123,.T.);+#1126=ORIENTED_EDGE('',*,*,#204,.F.);+#1127=ORIENTED_EDGE('',*,*,#1104,.F.);+#1128=PLANE('',#1129);+#1129=AXIS2_PLACEMENT_3D('',#1106,#464,#408);+#1130=ADVANCED_FACE('',(#1131),#435,.F.);+#1131=FACE_BOUND('',#1132,.F.);+#1132=EDGE_LOOP('',(#1133,#1134,#1138,#1142));+#1133=ORIENTED_EDGE('',*,*,#1125,.F.);+#1134=ORIENTED_EDGE('',*,*,#1135,.T.);+#1135=EDGE_CURVE('',#1121,#1136,#402,.T.);+#1136=VERTEX_POINT('',#1137);+#1137=CARTESIAN_POINT('',(1.71,7.,0.85));+#1138=ORIENTED_EDGE('',*,*,#1139,.T.);+#1139=EDGE_CURVE('',#1136,#209,#1140,.T.);+#1140=LINE('',#1141,#407);+#1141=CARTESIAN_POINT('',(1.71,7.2,0.85));+#1142=ORIENTED_EDGE('',*,*,#208,.F.);+#1143=ADVANCED_FACE('',(#1144),#1163,.F.);+#1144=FACE_BOUND('',#1145,.F.);+#1145=EDGE_LOOP('',(#1146,#1149,#1154,#1159,#1161,#1162));+#1146=ORIENTED_EDGE('',*,*,#1147,.F.);+#1147=EDGE_CURVE('',#1148,#1136,#1140,.T.);+#1148=VERTEX_POINT('',#1141);+#1149=ORIENTED_EDGE('',*,*,#1150,.T.);+#1150=EDGE_CURVE('',#1148,#1151,#1153,.T.);+#1151=VERTEX_POINT('',#1152);+#1152=CARTESIAN_POINT('',(1.89,7.2,0.85));+#1153=LINE('',#1141,#451);+#1154=ORIENTED_EDGE('',*,*,#1155,.T.);+#1155=EDGE_CURVE('',#1151,#1156,#1158,.T.);+#1156=VERTEX_POINT('',#1157);+#1157=CARTESIAN_POINT('',(1.89,7.,0.85));+#1158=LINE('',#1152,#407);+#1159=ORIENTED_EDGE('',*,*,#1160,.T.);+#1160=EDGE_CURVE('',#1156,#213,#1158,.T.);+#1161=ORIENTED_EDGE('',*,*,#212,.F.);+#1162=ORIENTED_EDGE('',*,*,#1139,.F.);+#1163=PLANE('',#1164);+#1164=AXIS2_PLACEMENT_3D('',#1141,#464,#408);+#1165=ADVANCED_FACE('',(#1166),#435,.F.);+#1166=FACE_BOUND('',#1167,.F.);+#1167=EDGE_LOOP('',(#1168,#1169,#1173,#1177));+#1168=ORIENTED_EDGE('',*,*,#1160,.F.);+#1169=ORIENTED_EDGE('',*,*,#1170,.T.);+#1170=EDGE_CURVE('',#1156,#1171,#402,.T.);+#1171=VERTEX_POINT('',#1172);+#1172=CARTESIAN_POINT('',(2.11,7.,0.85));+#1173=ORIENTED_EDGE('',*,*,#1174,.T.);+#1174=EDGE_CURVE('',#1171,#217,#1175,.T.);+#1175=LINE('',#1176,#407);+#1176=CARTESIAN_POINT('',(2.11,7.2,0.85));+#1177=ORIENTED_EDGE('',*,*,#216,.F.);+#1178=ADVANCED_FACE('',(#1179),#1198,.F.);+#1179=FACE_BOUND('',#1180,.F.);+#1180=EDGE_LOOP('',(#1181,#1184,#1189,#1194,#1196,#1197));+#1181=ORIENTED_EDGE('',*,*,#1182,.F.);+#1182=EDGE_CURVE('',#1183,#1171,#1175,.T.);+#1183=VERTEX_POINT('',#1176);+#1184=ORIENTED_EDGE('',*,*,#1185,.T.);+#1185=EDGE_CURVE('',#1183,#1186,#1188,.T.);+#1186=VERTEX_POINT('',#1187);+#1187=CARTESIAN_POINT('',(2.29,7.2,0.85));+#1188=LINE('',#1176,#451);+#1189=ORIENTED_EDGE('',*,*,#1190,.T.);+#1190=EDGE_CURVE('',#1186,#1191,#1193,.T.);+#1191=VERTEX_POINT('',#1192);+#1192=CARTESIAN_POINT('',(2.29,7.,0.85));+#1193=LINE('',#1187,#407);+#1194=ORIENTED_EDGE('',*,*,#1195,.T.);+#1195=EDGE_CURVE('',#1191,#221,#1193,.T.);+#1196=ORIENTED_EDGE('',*,*,#220,.F.);+#1197=ORIENTED_EDGE('',*,*,#1174,.F.);+#1198=PLANE('',#1199);+#1199=AXIS2_PLACEMENT_3D('',#1176,#464,#408);+#1200=ADVANCED_FACE('',(#1201),#435,.F.);+#1201=FACE_BOUND('',#1202,.F.);+#1202=EDGE_LOOP('',(#1203,#1204,#1208,#1212));+#1203=ORIENTED_EDGE('',*,*,#1195,.F.);+#1204=ORIENTED_EDGE('',*,*,#1205,.T.);+#1205=EDGE_CURVE('',#1191,#1206,#402,.T.);+#1206=VERTEX_POINT('',#1207);+#1207=CARTESIAN_POINT('',(2.51,7.,0.85));+#1208=ORIENTED_EDGE('',*,*,#1209,.T.);+#1209=EDGE_CURVE('',#1206,#225,#1210,.T.);+#1210=LINE('',#1211,#407);+#1211=CARTESIAN_POINT('',(2.51,7.2,0.85));+#1212=ORIENTED_EDGE('',*,*,#224,.F.);+#1213=ADVANCED_FACE('',(#1214),#1233,.F.);+#1214=FACE_BOUND('',#1215,.F.);+#1215=EDGE_LOOP('',(#1216,#1219,#1224,#1229,#1231,#1232));+#1216=ORIENTED_EDGE('',*,*,#1217,.F.);+#1217=EDGE_CURVE('',#1218,#1206,#1210,.T.);+#1218=VERTEX_POINT('',#1211);+#1219=ORIENTED_EDGE('',*,*,#1220,.T.);+#1220=EDGE_CURVE('',#1218,#1221,#1223,.T.);+#1221=VERTEX_POINT('',#1222);+#1222=CARTESIAN_POINT('',(2.69,7.2,0.85));+#1223=LINE('',#1211,#451);+#1224=ORIENTED_EDGE('',*,*,#1225,.T.);+#1225=EDGE_CURVE('',#1221,#1226,#1228,.T.);+#1226=VERTEX_POINT('',#1227);+#1227=CARTESIAN_POINT('',(2.69,7.,0.85));+#1228=LINE('',#1222,#407);+#1229=ORIENTED_EDGE('',*,*,#1230,.T.);+#1230=EDGE_CURVE('',#1226,#229,#1228,.T.);+#1231=ORIENTED_EDGE('',*,*,#228,.F.);+#1232=ORIENTED_EDGE('',*,*,#1209,.F.);+#1233=PLANE('',#1234);+#1234=AXIS2_PLACEMENT_3D('',#1211,#464,#408);+#1235=ADVANCED_FACE('',(#1236),#435,.F.);+#1236=FACE_BOUND('',#1237,.F.);+#1237=EDGE_LOOP('',(#1238,#1239,#1243,#1247));+#1238=ORIENTED_EDGE('',*,*,#1230,.F.);+#1239=ORIENTED_EDGE('',*,*,#1240,.T.);+#1240=EDGE_CURVE('',#1226,#1241,#402,.T.);+#1241=VERTEX_POINT('',#1242);+#1242=CARTESIAN_POINT('',(2.91,7.,0.85));+#1243=ORIENTED_EDGE('',*,*,#1244,.T.);+#1244=EDGE_CURVE('',#1241,#233,#1245,.T.);+#1245=LINE('',#1246,#407);+#1246=CARTESIAN_POINT('',(2.91,7.2,0.85));+#1247=ORIENTED_EDGE('',*,*,#232,.F.);+#1248=ADVANCED_FACE('',(#1249),#1268,.F.);+#1249=FACE_BOUND('',#1250,.F.);+#1250=EDGE_LOOP('',(#1251,#1254,#1259,#1264,#1266,#1267));+#1251=ORIENTED_EDGE('',*,*,#1252,.F.);+#1252=EDGE_CURVE('',#1253,#1241,#1245,.T.);+#1253=VERTEX_POINT('',#1246);+#1254=ORIENTED_EDGE('',*,*,#1255,.T.);+#1255=EDGE_CURVE('',#1253,#1256,#1258,.T.);+#1256=VERTEX_POINT('',#1257);+#1257=CARTESIAN_POINT('',(3.09,7.2,0.85));+#1258=LINE('',#1246,#451);+#1259=ORIENTED_EDGE('',*,*,#1260,.T.);+#1260=EDGE_CURVE('',#1256,#1261,#1263,.T.);+#1261=VERTEX_POINT('',#1262);+#1262=CARTESIAN_POINT('',(3.09,7.,0.85));+#1263=LINE('',#1257,#407);+#1264=ORIENTED_EDGE('',*,*,#1265,.T.);+#1265=EDGE_CURVE('',#1261,#237,#1263,.T.);+#1266=ORIENTED_EDGE('',*,*,#236,.F.);+#1267=ORIENTED_EDGE('',*,*,#1244,.F.);+#1268=PLANE('',#1269);+#1269=AXIS2_PLACEMENT_3D('',#1246,#464,#408);+#1270=ADVANCED_FACE('',(#1271),#435,.F.);+#1271=FACE_BOUND('',#1272,.F.);+#1272=EDGE_LOOP('',(#1273,#1274,#1278,#1282));+#1273=ORIENTED_EDGE('',*,*,#1265,.F.);+#1274=ORIENTED_EDGE('',*,*,#1275,.T.);+#1275=EDGE_CURVE('',#1261,#1276,#402,.T.);+#1276=VERTEX_POINT('',#1277);+#1277=CARTESIAN_POINT('',(3.31,7.,0.85));+#1278=ORIENTED_EDGE('',*,*,#1279,.T.);+#1279=EDGE_CURVE('',#1276,#241,#1280,.T.);+#1280=LINE('',#1281,#407);+#1281=CARTESIAN_POINT('',(3.31,7.2,0.85));+#1282=ORIENTED_EDGE('',*,*,#240,.F.);+#1283=ADVANCED_FACE('',(#1284),#1303,.F.);+#1284=FACE_BOUND('',#1285,.F.);+#1285=EDGE_LOOP('',(#1286,#1289,#1294,#1299,#1301,#1302));+#1286=ORIENTED_EDGE('',*,*,#1287,.F.);+#1287=EDGE_CURVE('',#1288,#1276,#1280,.T.);+#1288=VERTEX_POINT('',#1281);+#1289=ORIENTED_EDGE('',*,*,#1290,.T.);+#1290=EDGE_CURVE('',#1288,#1291,#1293,.T.);+#1291=VERTEX_POINT('',#1292);+#1292=CARTESIAN_POINT('',(3.49,7.2,0.85));+#1293=LINE('',#1281,#451);+#1294=ORIENTED_EDGE('',*,*,#1295,.T.);+#1295=EDGE_CURVE('',#1291,#1296,#1298,.T.);+#1296=VERTEX_POINT('',#1297);+#1297=CARTESIAN_POINT('',(3.49,7.,0.85));+#1298=LINE('',#1292,#407);+#1299=ORIENTED_EDGE('',*,*,#1300,.T.);+#1300=EDGE_CURVE('',#1296,#245,#1298,.T.);+#1301=ORIENTED_EDGE('',*,*,#244,.F.);+#1302=ORIENTED_EDGE('',*,*,#1279,.F.);+#1303=PLANE('',#1304);+#1304=AXIS2_PLACEMENT_3D('',#1281,#464,#408);+#1305=ADVANCED_FACE('',(#1306),#435,.F.);+#1306=FACE_BOUND('',#1307,.F.);+#1307=EDGE_LOOP('',(#1308,#1309,#1313,#1317));+#1308=ORIENTED_EDGE('',*,*,#1300,.F.);+#1309=ORIENTED_EDGE('',*,*,#1310,.T.);+#1310=EDGE_CURVE('',#1296,#1311,#402,.T.);+#1311=VERTEX_POINT('',#1312);+#1312=CARTESIAN_POINT('',(3.71,7.,0.85));+#1313=ORIENTED_EDGE('',*,*,#1314,.T.);+#1314=EDGE_CURVE('',#1311,#249,#1315,.T.);+#1315=LINE('',#1316,#407);+#1316=CARTESIAN_POINT('',(3.71,7.2,0.85));+#1317=ORIENTED_EDGE('',*,*,#248,.F.);+#1318=ADVANCED_FACE('',(#1319),#1338,.F.);+#1319=FACE_BOUND('',#1320,.F.);+#1320=EDGE_LOOP('',(#1321,#1324,#1329,#1334,#1336,#1337));+#1321=ORIENTED_EDGE('',*,*,#1322,.F.);+#1322=EDGE_CURVE('',#1323,#1311,#1315,.T.);+#1323=VERTEX_POINT('',#1316);+#1324=ORIENTED_EDGE('',*,*,#1325,.T.);+#1325=EDGE_CURVE('',#1323,#1326,#1328,.T.);+#1326=VERTEX_POINT('',#1327);+#1327=CARTESIAN_POINT('',(3.89,7.2,0.85));+#1328=LINE('',#1316,#451);+#1329=ORIENTED_EDGE('',*,*,#1330,.T.);+#1330=EDGE_CURVE('',#1326,#1331,#1333,.T.);+#1331=VERTEX_POINT('',#1332);+#1332=CARTESIAN_POINT('',(3.89,7.,0.85));+#1333=LINE('',#1327,#407);+#1334=ORIENTED_EDGE('',*,*,#1335,.T.);+#1335=EDGE_CURVE('',#1331,#253,#1333,.T.);+#1336=ORIENTED_EDGE('',*,*,#252,.F.);+#1337=ORIENTED_EDGE('',*,*,#1314,.F.);+#1338=PLANE('',#1339);+#1339=AXIS2_PLACEMENT_3D('',#1316,#464,#408);+#1340=ADVANCED_FACE('',(#1341),#435,.F.);+#1341=FACE_BOUND('',#1342,.F.);+#1342=EDGE_LOOP('',(#1343,#1344,#1348,#1352));+#1343=ORIENTED_EDGE('',*,*,#1335,.F.);+#1344=ORIENTED_EDGE('',*,*,#1345,.T.);+#1345=EDGE_CURVE('',#1331,#1346,#402,.T.);+#1346=VERTEX_POINT('',#1347);+#1347=CARTESIAN_POINT('',(4.11,7.,0.85));+#1348=ORIENTED_EDGE('',*,*,#1349,.T.);+#1349=EDGE_CURVE('',#1346,#257,#1350,.T.);+#1350=LINE('',#1351,#407);+#1351=CARTESIAN_POINT('',(4.11,7.2,0.85));+#1352=ORIENTED_EDGE('',*,*,#256,.F.);+#1353=ADVANCED_FACE('',(#1354),#1373,.F.);+#1354=FACE_BOUND('',#1355,.F.);+#1355=EDGE_LOOP('',(#1356,#1359,#1364,#1369,#1371,#1372));+#1356=ORIENTED_EDGE('',*,*,#1357,.F.);+#1357=EDGE_CURVE('',#1358,#1346,#1350,.T.);+#1358=VERTEX_POINT('',#1351);+#1359=ORIENTED_EDGE('',*,*,#1360,.T.);+#1360=EDGE_CURVE('',#1358,#1361,#1363,.T.);+#1361=VERTEX_POINT('',#1362);+#1362=CARTESIAN_POINT('',(4.29,7.2,0.85));+#1363=LINE('',#1351,#451);+#1364=ORIENTED_EDGE('',*,*,#1365,.T.);+#1365=EDGE_CURVE('',#1361,#1366,#1368,.T.);+#1366=VERTEX_POINT('',#1367);+#1367=CARTESIAN_POINT('',(4.29,7.,0.85));+#1368=LINE('',#1362,#407);+#1369=ORIENTED_EDGE('',*,*,#1370,.T.);+#1370=EDGE_CURVE('',#1366,#261,#1368,.T.);+#1371=ORIENTED_EDGE('',*,*,#260,.F.);+#1372=ORIENTED_EDGE('',*,*,#1349,.F.);+#1373=PLANE('',#1374);+#1374=AXIS2_PLACEMENT_3D('',#1351,#464,#408);+#1375=ADVANCED_FACE('',(#1376),#435,.F.);+#1376=FACE_BOUND('',#1377,.F.);+#1377=EDGE_LOOP('',(#1378,#1379,#1383,#1387));+#1378=ORIENTED_EDGE('',*,*,#1370,.F.);+#1379=ORIENTED_EDGE('',*,*,#1380,.T.);+#1380=EDGE_CURVE('',#1366,#1381,#402,.T.);+#1381=VERTEX_POINT('',#1382);+#1382=CARTESIAN_POINT('',(4.51,7.,0.85));+#1383=ORIENTED_EDGE('',*,*,#1384,.T.);+#1384=EDGE_CURVE('',#1381,#265,#1385,.T.);+#1385=LINE('',#1386,#407);+#1386=CARTESIAN_POINT('',(4.51,7.2,0.85));+#1387=ORIENTED_EDGE('',*,*,#264,.F.);+#1388=ADVANCED_FACE('',(#1389),#1408,.F.);+#1389=FACE_BOUND('',#1390,.F.);+#1390=EDGE_LOOP('',(#1391,#1394,#1399,#1404,#1406,#1407));+#1391=ORIENTED_EDGE('',*,*,#1392,.F.);+#1392=EDGE_CURVE('',#1393,#1381,#1385,.T.);+#1393=VERTEX_POINT('',#1386);+#1394=ORIENTED_EDGE('',*,*,#1395,.T.);+#1395=EDGE_CURVE('',#1393,#1396,#1398,.T.);+#1396=VERTEX_POINT('',#1397);+#1397=CARTESIAN_POINT('',(4.69,7.2,0.85));+#1398=LINE('',#1386,#451);+#1399=ORIENTED_EDGE('',*,*,#1400,.T.);+#1400=EDGE_CURVE('',#1396,#1401,#1403,.T.);+#1401=VERTEX_POINT('',#1402);+#1402=CARTESIAN_POINT('',(4.69,7.,0.85));+#1403=LINE('',#1397,#407);+#1404=ORIENTED_EDGE('',*,*,#1405,.T.);+#1405=EDGE_CURVE('',#1401,#269,#1403,.T.);+#1406=ORIENTED_EDGE('',*,*,#268,.F.);+#1407=ORIENTED_EDGE('',*,*,#1384,.F.);+#1408=PLANE('',#1409);+#1409=AXIS2_PLACEMENT_3D('',#1386,#464,#408);+#1410=ADVANCED_FACE('',(#1411),#435,.F.);+#1411=FACE_BOUND('',#1412,.F.);+#1412=EDGE_LOOP('',(#1413,#1414,#1418,#1422));+#1413=ORIENTED_EDGE('',*,*,#1405,.F.);+#1414=ORIENTED_EDGE('',*,*,#1415,.T.);+#1415=EDGE_CURVE('',#1401,#1416,#402,.T.);+#1416=VERTEX_POINT('',#1417);+#1417=CARTESIAN_POINT('',(4.91,7.,0.85));+#1418=ORIENTED_EDGE('',*,*,#1419,.T.);+#1419=EDGE_CURVE('',#1416,#273,#1420,.T.);+#1420=LINE('',#1421,#407);+#1421=CARTESIAN_POINT('',(4.91,7.2,0.85));+#1422=ORIENTED_EDGE('',*,*,#272,.F.);+#1423=ADVANCED_FACE('',(#1424),#1443,.F.);+#1424=FACE_BOUND('',#1425,.F.);+#1425=EDGE_LOOP('',(#1426,#1429,#1434,#1439,#1441,#1442));+#1426=ORIENTED_EDGE('',*,*,#1427,.F.);+#1427=EDGE_CURVE('',#1428,#1416,#1420,.T.);+#1428=VERTEX_POINT('',#1421);+#1429=ORIENTED_EDGE('',*,*,#1430,.T.);+#1430=EDGE_CURVE('',#1428,#1431,#1433,.T.);+#1431=VERTEX_POINT('',#1432);+#1432=CARTESIAN_POINT('',(5.09,7.2,0.85));+#1433=LINE('',#1421,#451);+#1434=ORIENTED_EDGE('',*,*,#1435,.T.);+#1435=EDGE_CURVE('',#1431,#1436,#1438,.T.);+#1436=VERTEX_POINT('',#1437);+#1437=CARTESIAN_POINT('',(5.09,7.,0.85));+#1438=LINE('',#1432,#407);+#1439=ORIENTED_EDGE('',*,*,#1440,.T.);+#1440=EDGE_CURVE('',#1436,#277,#1438,.T.);+#1441=ORIENTED_EDGE('',*,*,#276,.F.);+#1442=ORIENTED_EDGE('',*,*,#1419,.F.);+#1443=PLANE('',#1444);+#1444=AXIS2_PLACEMENT_3D('',#1421,#464,#408);+#1445=ADVANCED_FACE('',(#1446),#435,.F.);+#1446=FACE_BOUND('',#1447,.F.);+#1447=EDGE_LOOP('',(#1448,#1449,#1453,#1457));+#1448=ORIENTED_EDGE('',*,*,#1440,.F.);+#1449=ORIENTED_EDGE('',*,*,#1450,.T.);+#1450=EDGE_CURVE('',#1436,#1451,#402,.T.);+#1451=VERTEX_POINT('',#1452);+#1452=CARTESIAN_POINT('',(5.31,7.,0.85));+#1453=ORIENTED_EDGE('',*,*,#1454,.T.);+#1454=EDGE_CURVE('',#1451,#281,#1455,.T.);+#1455=LINE('',#1456,#407);+#1456=CARTESIAN_POINT('',(5.31,7.2,0.85));+#1457=ORIENTED_EDGE('',*,*,#280,.F.);+#1458=ADVANCED_FACE('',(#1459),#1478,.F.);+#1459=FACE_BOUND('',#1460,.F.);+#1460=EDGE_LOOP('',(#1461,#1464,#1469,#1474,#1476,#1477));+#1461=ORIENTED_EDGE('',*,*,#1462,.F.);+#1462=EDGE_CURVE('',#1463,#1451,#1455,.T.);+#1463=VERTEX_POINT('',#1456);+#1464=ORIENTED_EDGE('',*,*,#1465,.T.);+#1465=EDGE_CURVE('',#1463,#1466,#1468,.T.);+#1466=VERTEX_POINT('',#1467);+#1467=CARTESIAN_POINT('',(5.49,7.2,0.85));+#1468=LINE('',#1456,#451);+#1469=ORIENTED_EDGE('',*,*,#1470,.T.);+#1470=EDGE_CURVE('',#1466,#1471,#1473,.T.);+#1471=VERTEX_POINT('',#1472);+#1472=CARTESIAN_POINT('',(5.49,7.,0.85));+#1473=LINE('',#1467,#407);+#1474=ORIENTED_EDGE('',*,*,#1475,.T.);+#1475=EDGE_CURVE('',#1471,#285,#1473,.T.);+#1476=ORIENTED_EDGE('',*,*,#284,.F.);+#1477=ORIENTED_EDGE('',*,*,#1454,.F.);+#1478=PLANE('',#1479);+#1479=AXIS2_PLACEMENT_3D('',#1456,#464,#408);+#1480=ADVANCED_FACE('',(#1481),#435,.F.);+#1481=FACE_BOUND('',#1482,.F.);+#1482=EDGE_LOOP('',(#1483,#1484,#1488,#1492));+#1483=ORIENTED_EDGE('',*,*,#1475,.F.);+#1484=ORIENTED_EDGE('',*,*,#1485,.T.);+#1485=EDGE_CURVE('',#1471,#1486,#402,.T.);+#1486=VERTEX_POINT('',#1487);+#1487=CARTESIAN_POINT('',(5.71,7.,0.85));+#1488=ORIENTED_EDGE('',*,*,#1489,.T.);+#1489=EDGE_CURVE('',#1486,#289,#1490,.T.);+#1490=LINE('',#1491,#407);+#1491=CARTESIAN_POINT('',(5.71,7.2,0.85));+#1492=ORIENTED_EDGE('',*,*,#288,.F.);+#1493=ADVANCED_FACE('',(#1494),#1513,.F.);+#1494=FACE_BOUND('',#1495,.F.);+#1495=EDGE_LOOP('',(#1496,#1499,#1504,#1509,#1511,#1512));+#1496=ORIENTED_EDGE('',*,*,#1497,.F.);+#1497=EDGE_CURVE('',#1498,#1486,#1490,.T.);+#1498=VERTEX_POINT('',#1491);+#1499=ORIENTED_EDGE('',*,*,#1500,.T.);+#1500=EDGE_CURVE('',#1498,#1501,#1503,.T.);+#1501=VERTEX_POINT('',#1502);+#1502=CARTESIAN_POINT('',(5.89,7.2,0.85));+#1503=LINE('',#1491,#451);+#1504=ORIENTED_EDGE('',*,*,#1505,.T.);+#1505=EDGE_CURVE('',#1501,#1506,#1508,.T.);+#1506=VERTEX_POINT('',#1507);+#1507=CARTESIAN_POINT('',(5.89,7.,0.85));+#1508=LINE('',#1502,#407);+#1509=ORIENTED_EDGE('',*,*,#1510,.T.);+#1510=EDGE_CURVE('',#1506,#293,#1508,.T.);+#1511=ORIENTED_EDGE('',*,*,#292,.F.);+#1512=ORIENTED_EDGE('',*,*,#1489,.F.);+#1513=PLANE('',#1514);+#1514=AXIS2_PLACEMENT_3D('',#1491,#464,#408);+#1515=ADVANCED_FACE('',(#1516),#435,.F.);+#1516=FACE_BOUND('',#1517,.F.);+#1517=EDGE_LOOP('',(#1518,#1519,#1523,#1527));+#1518=ORIENTED_EDGE('',*,*,#1510,.F.);+#1519=ORIENTED_EDGE('',*,*,#1520,.T.);+#1520=EDGE_CURVE('',#1506,#1521,#402,.T.);+#1521=VERTEX_POINT('',#1522);+#1522=CARTESIAN_POINT('',(6.11,7.,0.85));+#1523=ORIENTED_EDGE('',*,*,#1524,.T.);+#1524=EDGE_CURVE('',#1521,#297,#1525,.T.);+#1525=LINE('',#1526,#407);+#1526=CARTESIAN_POINT('',(6.11,7.2,0.85));+#1527=ORIENTED_EDGE('',*,*,#296,.F.);+#1528=ADVANCED_FACE('',(#1529),#1548,.F.);+#1529=FACE_BOUND('',#1530,.F.);+#1530=EDGE_LOOP('',(#1531,#1534,#1539,#1544,#1546,#1547));+#1531=ORIENTED_EDGE('',*,*,#1532,.F.);+#1532=EDGE_CURVE('',#1533,#1521,#1525,.T.);+#1533=VERTEX_POINT('',#1526);+#1534=ORIENTED_EDGE('',*,*,#1535,.T.);+#1535=EDGE_CURVE('',#1533,#1536,#1538,.T.);+#1536=VERTEX_POINT('',#1537);+#1537=CARTESIAN_POINT('',(6.29,7.2,0.85));+#1538=LINE('',#1526,#451);+#1539=ORIENTED_EDGE('',*,*,#1540,.T.);+#1540=EDGE_CURVE('',#1536,#1541,#1543,.T.);+#1541=VERTEX_POINT('',#1542);+#1542=CARTESIAN_POINT('',(6.29,7.,0.85));+#1543=LINE('',#1537,#407);+#1544=ORIENTED_EDGE('',*,*,#1545,.T.);+#1545=EDGE_CURVE('',#1541,#301,#1543,.T.);+#1546=ORIENTED_EDGE('',*,*,#300,.F.);+#1547=ORIENTED_EDGE('',*,*,#1524,.F.);+#1548=PLANE('',#1549);+#1549=AXIS2_PLACEMENT_3D('',#1526,#464,#408);+#1550=ADVANCED_FACE('',(#1551),#435,.F.);+#1551=FACE_BOUND('',#1552,.F.);+#1552=EDGE_LOOP('',(#1553,#1554,#1558,#1563,#1570,#1578,#1581,#1582));+#1553=ORIENTED_EDGE('',*,*,#1545,.F.);+#1554=ORIENTED_EDGE('',*,*,#1555,.T.);+#1555=EDGE_CURVE('',#1541,#1556,#402,.T.);+#1556=VERTEX_POINT('',#1557);+#1557=CARTESIAN_POINT('',(6.825,7.,0.85));+#1558=ORIENTED_EDGE('',*,*,#1559,.T.);+#1559=EDGE_CURVE('',#1556,#1560,#1562,.T.);+#1560=VERTEX_POINT('',#1561);+#1561=CARTESIAN_POINT('',(7.,6.825,0.85));+#1562=LINE('',#1557,#329);+#1563=ORIENTED_EDGE('',*,*,#1564,.T.);+#1564=EDGE_CURVE('',#1560,#1565,#1567,.T.);+#1565=VERTEX_POINT('',#1566);+#1566=CARTESIAN_POINT('',(7.,6.29,0.85));+#1567=LINE('',#1561,#1568);+#1568=VECTOR('',#1569,1.);+#1569=DIRECTION('',(1.110223024625E-16,-1.,0.));+#1570=ORIENTED_EDGE('',*,*,#1571,.T.);+#1571=EDGE_CURVE('',#1565,#1572,#1574,.T.);+#1572=VERTEX_POINT('',#1573);+#1573=CARTESIAN_POINT('',(6.925,6.29,0.85));+#1574=LINE('',#1575,#1576);+#1575=CARTESIAN_POINT('',(7.2,6.29,0.85));+#1576=VECTOR('',#1577,1.);+#1577=DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1578=ORIENTED_EDGE('',*,*,#1579,.F.);+#1579=EDGE_CURVE('',#311,#1572,#1580,.T.);+#1580=LINE('',#312,#1568);+#1581=ORIENTED_EDGE('',*,*,#327,.F.);+#1582=ORIENTED_EDGE('',*,*,#304,.F.);+#1583=ADVANCED_FACE('',(#1584),#1602,.F.);+#1584=FACE_BOUND('',#1585,.F.);+#1585=EDGE_LOOP('',(#1586,#1587,#1597,#1601));+#1586=ORIENTED_EDGE('',*,*,#39,.T.);+#1587=ORIENTED_EDGE('',*,*,#1588,.F.);+#1588=EDGE_CURVE('',#1589,#30,#1591,.T.);+#1589=VERTEX_POINT('',#1590);+#1590=CARTESIAN_POINT('',(-6.795256413291,6.722628206646,1.460395584541));+#1591=B_SPLINE_CURVE_WITH_KNOTS('',2,(#1592,#1593,#1594,#1595,#1596),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.28964361549,-3.998243263537E-02,0.136741676868,0.386402859722),.UNSPECIFIED.);+#1592=CARTESIAN_POINT('',(-6.997865034984,6.519827987965,1.460996513181));+#1593=CARTESIAN_POINT('',(-6.909596477286,6.608096545662,1.460996513181));+#1594=CARTESIAN_POINT('',(-6.758846511474,6.758846511474,1.460996513181));+#1595=CARTESIAN_POINT('',(-6.608096545662,6.909596477286,1.460996513181));+#1596=CARTESIAN_POINT('',(-6.519827987965,6.997865034984,1.460996513181));+#1597=ORIENTED_EDGE('',*,*,#1598,.F.);+#1598=EDGE_CURVE('',#412,#1589,#1599,.T.);+#1599=B_SPLINE_CURVE_WITH_KNOTS('',1,(#413,#1600),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1600=CARTESIAN_POINT('',(-6.786838234914,6.718419117457,1.5));+#1601=ORIENTED_EDGE('',*,*,#411,.T.);+#1602=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#413,#1600),(#41,#43)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1603=ADVANCED_FACE('',(#1604),#1878,.F.);+#1604=FACE_BOUND('',#1605,.F.);+#1605=EDGE_LOOP('',(#1606,#1614,#1622,#1623,#1624,#1628,#1632,#1636,#1640,#1644,#1648,#1652,#1656,#1660,#1664,#1668,#1672,#1676,#1680,#1684,#1688,#1692,#1696,#1700,#1704,#1708,#1712,#1716,#1720,#1724,#1728,#1732,#1736,#1740,#1744,#1748,#1752,#1756,#1760,#1764,#1768,#1772,#1776,#1780,#1784,#1788,#1792,#1796,#1800,#1804,#1808,#1812,#1816,#1820,#1824,#1828,#1832,#1836,#1840,#1844,#1848,#1852,#1856,#1860,#1864,#1868,#1872,#1876));+#1606=ORIENTED_EDGE('',*,*,#1607,.T.);+#1607=EDGE_CURVE('',#1608,#1610,#1612,.T.);+#1608=VERTEX_POINT('',#1609);+#1609=CARTESIAN_POINT('',(6.925,-6.7875,0.85));+#1610=VERTEX_POINT('',#1611);+#1611=CARTESIAN_POINT('',(6.795256413291,-6.722628206646,1.460395584541));+#1612=B_SPLINE_CURVE_WITH_KNOTS('',1,(#1609,#1613),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1613=CARTESIAN_POINT('',(6.786838234914,-6.718419117457,1.5));+#1614=ORIENTED_EDGE('',*,*,#1615,.F.);+#1615=EDGE_CURVE('',#313,#1610,#1616,.T.);+#1616=B_SPLINE_CURVE_WITH_KNOTS('',2,(#1617,#1618,#1619,#1620,#1621),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.698356801641,-4.048920165974E-02,13.477327436574,14.135195036556),.UNSPECIFIED.);+#1617=CARTESIAN_POINT('',(6.795256413291,7.416775919098,1.460395584541));+#1618=CARTESIAN_POINT('',(6.795256413291,7.087842119108,1.460395584541));+#1619=CARTESIAN_POINT('',(6.795256413291,1.642603432527E-15,1.460395584541));+#1620=CARTESIAN_POINT('',(6.795256413291,-7.087842119108,1.460395584541));+#1621=CARTESIAN_POINT('',(6.795256413291,-7.416775919098,1.460395584541));+#1622=ORIENTED_EDGE('',*,*,#310,.F.);+#1623=ORIENTED_EDGE('',*,*,#1579,.T.);+#1624=ORIENTED_EDGE('',*,*,#1625,.T.);+#1625=EDGE_CURVE('',#1572,#1626,#1580,.T.);+#1626=VERTEX_POINT('',#1627);+#1627=CARTESIAN_POINT('',(6.925,6.11,0.85));+#1628=ORIENTED_EDGE('',*,*,#1629,.T.);+#1629=EDGE_CURVE('',#1626,#1630,#1580,.T.);+#1630=VERTEX_POINT('',#1631);+#1631=CARTESIAN_POINT('',(6.925,5.89,0.85));+#1632=ORIENTED_EDGE('',*,*,#1633,.T.);+#1633=EDGE_CURVE('',#1630,#1634,#1580,.T.);+#1634=VERTEX_POINT('',#1635);+#1635=CARTESIAN_POINT('',(6.925,5.71,0.85));+#1636=ORIENTED_EDGE('',*,*,#1637,.T.);+#1637=EDGE_CURVE('',#1634,#1638,#1580,.T.);+#1638=VERTEX_POINT('',#1639);+#1639=CARTESIAN_POINT('',(6.925,5.49,0.85));+#1640=ORIENTED_EDGE('',*,*,#1641,.T.);+#1641=EDGE_CURVE('',#1638,#1642,#1580,.T.);+#1642=VERTEX_POINT('',#1643);+#1643=CARTESIAN_POINT('',(6.925,5.31,0.85));+#1644=ORIENTED_EDGE('',*,*,#1645,.T.);+#1645=EDGE_CURVE('',#1642,#1646,#1580,.T.);+#1646=VERTEX_POINT('',#1647);+#1647=CARTESIAN_POINT('',(6.925,5.09,0.85));+#1648=ORIENTED_EDGE('',*,*,#1649,.T.);+#1649=EDGE_CURVE('',#1646,#1650,#1580,.T.);+#1650=VERTEX_POINT('',#1651);+#1651=CARTESIAN_POINT('',(6.925,4.91,0.85));+#1652=ORIENTED_EDGE('',*,*,#1653,.T.);+#1653=EDGE_CURVE('',#1650,#1654,#1580,.T.);+#1654=VERTEX_POINT('',#1655);+#1655=CARTESIAN_POINT('',(6.925,4.69,0.85));+#1656=ORIENTED_EDGE('',*,*,#1657,.T.);+#1657=EDGE_CURVE('',#1654,#1658,#1580,.T.);+#1658=VERTEX_POINT('',#1659);+#1659=CARTESIAN_POINT('',(6.925,4.51,0.85));+#1660=ORIENTED_EDGE('',*,*,#1661,.T.);+#1661=EDGE_CURVE('',#1658,#1662,#1580,.T.);+#1662=VERTEX_POINT('',#1663);+#1663=CARTESIAN_POINT('',(6.925,4.29,0.85));+#1664=ORIENTED_EDGE('',*,*,#1665,.T.);+#1665=EDGE_CURVE('',#1662,#1666,#1580,.T.);+#1666=VERTEX_POINT('',#1667);+#1667=CARTESIAN_POINT('',(6.925,4.11,0.85));+#1668=ORIENTED_EDGE('',*,*,#1669,.T.);+#1669=EDGE_CURVE('',#1666,#1670,#1580,.T.);+#1670=VERTEX_POINT('',#1671);+#1671=CARTESIAN_POINT('',(6.925,3.89,0.85));+#1672=ORIENTED_EDGE('',*,*,#1673,.T.);+#1673=EDGE_CURVE('',#1670,#1674,#1580,.T.);+#1674=VERTEX_POINT('',#1675);+#1675=CARTESIAN_POINT('',(6.925,3.71,0.85));+#1676=ORIENTED_EDGE('',*,*,#1677,.T.);+#1677=EDGE_CURVE('',#1674,#1678,#1580,.T.);+#1678=VERTEX_POINT('',#1679);+#1679=CARTESIAN_POINT('',(6.925,3.49,0.85));+#1680=ORIENTED_EDGE('',*,*,#1681,.T.);+#1681=EDGE_CURVE('',#1678,#1682,#1580,.T.);+#1682=VERTEX_POINT('',#1683);+#1683=CARTESIAN_POINT('',(6.925,3.31,0.85));+#1684=ORIENTED_EDGE('',*,*,#1685,.T.);+#1685=EDGE_CURVE('',#1682,#1686,#1580,.T.);+#1686=VERTEX_POINT('',#1687);+#1687=CARTESIAN_POINT('',(6.925,3.09,0.85));+#1688=ORIENTED_EDGE('',*,*,#1689,.T.);+#1689=EDGE_CURVE('',#1686,#1690,#1580,.T.);+#1690=VERTEX_POINT('',#1691);+#1691=CARTESIAN_POINT('',(6.925,2.91,0.85));+#1692=ORIENTED_EDGE('',*,*,#1693,.T.);+#1693=EDGE_CURVE('',#1690,#1694,#1580,.T.);+#1694=VERTEX_POINT('',#1695);+#1695=CARTESIAN_POINT('',(6.925,2.69,0.85));+#1696=ORIENTED_EDGE('',*,*,#1697,.T.);+#1697=EDGE_CURVE('',#1694,#1698,#1580,.T.);+#1698=VERTEX_POINT('',#1699);+#1699=CARTESIAN_POINT('',(6.925,2.51,0.85));+#1700=ORIENTED_EDGE('',*,*,#1701,.T.);+#1701=EDGE_CURVE('',#1698,#1702,#1580,.T.);+#1702=VERTEX_POINT('',#1703);+#1703=CARTESIAN_POINT('',(6.925,2.29,0.85));+#1704=ORIENTED_EDGE('',*,*,#1705,.T.);+#1705=EDGE_CURVE('',#1702,#1706,#1580,.T.);+#1706=VERTEX_POINT('',#1707);+#1707=CARTESIAN_POINT('',(6.925,2.11,0.85));+#1708=ORIENTED_EDGE('',*,*,#1709,.T.);+#1709=EDGE_CURVE('',#1706,#1710,#1580,.T.);+#1710=VERTEX_POINT('',#1711);+#1711=CARTESIAN_POINT('',(6.925,1.89,0.85));+#1712=ORIENTED_EDGE('',*,*,#1713,.T.);+#1713=EDGE_CURVE('',#1710,#1714,#1580,.T.);+#1714=VERTEX_POINT('',#1715);+#1715=CARTESIAN_POINT('',(6.925,1.71,0.85));+#1716=ORIENTED_EDGE('',*,*,#1717,.T.);+#1717=EDGE_CURVE('',#1714,#1718,#1580,.T.);+#1718=VERTEX_POINT('',#1719);+#1719=CARTESIAN_POINT('',(6.925,1.49,0.85));+#1720=ORIENTED_EDGE('',*,*,#1721,.T.);+#1721=EDGE_CURVE('',#1718,#1722,#1580,.T.);+#1722=VERTEX_POINT('',#1723);+#1723=CARTESIAN_POINT('',(6.925,1.31,0.85));+#1724=ORIENTED_EDGE('',*,*,#1725,.T.);+#1725=EDGE_CURVE('',#1722,#1726,#1580,.T.);+#1726=VERTEX_POINT('',#1727);+#1727=CARTESIAN_POINT('',(6.925,1.09,0.85));+#1728=ORIENTED_EDGE('',*,*,#1729,.T.);+#1729=EDGE_CURVE('',#1726,#1730,#1580,.T.);+#1730=VERTEX_POINT('',#1731);+#1731=CARTESIAN_POINT('',(6.925,0.91,0.85));+#1732=ORIENTED_EDGE('',*,*,#1733,.T.);+#1733=EDGE_CURVE('',#1730,#1734,#1580,.T.);+#1734=VERTEX_POINT('',#1735);+#1735=CARTESIAN_POINT('',(6.925,0.69,0.85));+#1736=ORIENTED_EDGE('',*,*,#1737,.T.);+#1737=EDGE_CURVE('',#1734,#1738,#1580,.T.);+#1738=VERTEX_POINT('',#1739);+#1739=CARTESIAN_POINT('',(6.925,0.51,0.85));+#1740=ORIENTED_EDGE('',*,*,#1741,.T.);+#1741=EDGE_CURVE('',#1738,#1742,#1580,.T.);+#1742=VERTEX_POINT('',#1743);+#1743=CARTESIAN_POINT('',(6.925,0.29,0.85));+#1744=ORIENTED_EDGE('',*,*,#1745,.T.);+#1745=EDGE_CURVE('',#1742,#1746,#1580,.T.);+#1746=VERTEX_POINT('',#1747);+#1747=CARTESIAN_POINT('',(6.925,0.11,0.85));+#1748=ORIENTED_EDGE('',*,*,#1749,.T.);+#1749=EDGE_CURVE('',#1746,#1750,#1580,.T.);+#1750=VERTEX_POINT('',#1751);+#1751=CARTESIAN_POINT('',(6.925,-0.11,0.85));+#1752=ORIENTED_EDGE('',*,*,#1753,.T.);+#1753=EDGE_CURVE('',#1750,#1754,#1580,.T.);+#1754=VERTEX_POINT('',#1755);+#1755=CARTESIAN_POINT('',(6.925,-0.29,0.85));+#1756=ORIENTED_EDGE('',*,*,#1757,.T.);+#1757=EDGE_CURVE('',#1754,#1758,#1580,.T.);+#1758=VERTEX_POINT('',#1759);+#1759=CARTESIAN_POINT('',(6.925,-0.51,0.85));+#1760=ORIENTED_EDGE('',*,*,#1761,.T.);+#1761=EDGE_CURVE('',#1758,#1762,#1580,.T.);+#1762=VERTEX_POINT('',#1763);+#1763=CARTESIAN_POINT('',(6.925,-0.69,0.85));+#1764=ORIENTED_EDGE('',*,*,#1765,.T.);+#1765=EDGE_CURVE('',#1762,#1766,#1580,.T.);+#1766=VERTEX_POINT('',#1767);+#1767=CARTESIAN_POINT('',(6.925,-0.91,0.85));+#1768=ORIENTED_EDGE('',*,*,#1769,.T.);+#1769=EDGE_CURVE('',#1766,#1770,#1580,.T.);+#1770=VERTEX_POINT('',#1771);+#1771=CARTESIAN_POINT('',(6.925,-1.09,0.85));+#1772=ORIENTED_EDGE('',*,*,#1773,.T.);+#1773=EDGE_CURVE('',#1770,#1774,#1580,.T.);+#1774=VERTEX_POINT('',#1775);+#1775=CARTESIAN_POINT('',(6.925,-1.31,0.85));+#1776=ORIENTED_EDGE('',*,*,#1777,.T.);+#1777=EDGE_CURVE('',#1774,#1778,#1580,.T.);+#1778=VERTEX_POINT('',#1779);+#1779=CARTESIAN_POINT('',(6.925,-1.49,0.85));+#1780=ORIENTED_EDGE('',*,*,#1781,.T.);+#1781=EDGE_CURVE('',#1778,#1782,#1580,.T.);+#1782=VERTEX_POINT('',#1783);+#1783=CARTESIAN_POINT('',(6.925,-1.71,0.85));+#1784=ORIENTED_EDGE('',*,*,#1785,.T.);+#1785=EDGE_CURVE('',#1782,#1786,#1580,.T.);+#1786=VERTEX_POINT('',#1787);+#1787=CARTESIAN_POINT('',(6.925,-1.89,0.85));+#1788=ORIENTED_EDGE('',*,*,#1789,.T.);+#1789=EDGE_CURVE('',#1786,#1790,#1580,.T.);+#1790=VERTEX_POINT('',#1791);+#1791=CARTESIAN_POINT('',(6.925,-2.11,0.85));+#1792=ORIENTED_EDGE('',*,*,#1793,.T.);+#1793=EDGE_CURVE('',#1790,#1794,#1580,.T.);+#1794=VERTEX_POINT('',#1795);+#1795=CARTESIAN_POINT('',(6.925,-2.29,0.85));+#1796=ORIENTED_EDGE('',*,*,#1797,.T.);+#1797=EDGE_CURVE('',#1794,#1798,#1580,.T.);+#1798=VERTEX_POINT('',#1799);+#1799=CARTESIAN_POINT('',(6.925,-2.51,0.85));+#1800=ORIENTED_EDGE('',*,*,#1801,.T.);+#1801=EDGE_CURVE('',#1798,#1802,#1580,.T.);+#1802=VERTEX_POINT('',#1803);+#1803=CARTESIAN_POINT('',(6.925,-2.69,0.85));+#1804=ORIENTED_EDGE('',*,*,#1805,.T.);+#1805=EDGE_CURVE('',#1802,#1806,#1580,.T.);+#1806=VERTEX_POINT('',#1807);+#1807=CARTESIAN_POINT('',(6.925,-2.91,0.85));+#1808=ORIENTED_EDGE('',*,*,#1809,.T.);+#1809=EDGE_CURVE('',#1806,#1810,#1580,.T.);+#1810=VERTEX_POINT('',#1811);+#1811=CARTESIAN_POINT('',(6.925,-3.09,0.85));+#1812=ORIENTED_EDGE('',*,*,#1813,.T.);+#1813=EDGE_CURVE('',#1810,#1814,#1580,.T.);+#1814=VERTEX_POINT('',#1815);+#1815=CARTESIAN_POINT('',(6.925,-3.31,0.85));+#1816=ORIENTED_EDGE('',*,*,#1817,.T.);+#1817=EDGE_CURVE('',#1814,#1818,#1580,.T.);+#1818=VERTEX_POINT('',#1819);+#1819=CARTESIAN_POINT('',(6.925,-3.49,0.85));+#1820=ORIENTED_EDGE('',*,*,#1821,.T.);+#1821=EDGE_CURVE('',#1818,#1822,#1580,.T.);+#1822=VERTEX_POINT('',#1823);+#1823=CARTESIAN_POINT('',(6.925,-3.71,0.85));+#1824=ORIENTED_EDGE('',*,*,#1825,.T.);+#1825=EDGE_CURVE('',#1822,#1826,#1580,.T.);+#1826=VERTEX_POINT('',#1827);+#1827=CARTESIAN_POINT('',(6.925,-3.89,0.85));+#1828=ORIENTED_EDGE('',*,*,#1829,.T.);+#1829=EDGE_CURVE('',#1826,#1830,#1580,.T.);+#1830=VERTEX_POINT('',#1831);+#1831=CARTESIAN_POINT('',(6.925,-4.11,0.85));+#1832=ORIENTED_EDGE('',*,*,#1833,.T.);+#1833=EDGE_CURVE('',#1830,#1834,#1580,.T.);+#1834=VERTEX_POINT('',#1835);+#1835=CARTESIAN_POINT('',(6.925,-4.29,0.85));+#1836=ORIENTED_EDGE('',*,*,#1837,.T.);+#1837=EDGE_CURVE('',#1834,#1838,#1580,.T.);+#1838=VERTEX_POINT('',#1839);+#1839=CARTESIAN_POINT('',(6.925,-4.51,0.85));+#1840=ORIENTED_EDGE('',*,*,#1841,.T.);+#1841=EDGE_CURVE('',#1838,#1842,#1580,.T.);+#1842=VERTEX_POINT('',#1843);+#1843=CARTESIAN_POINT('',(6.925,-4.69,0.85));+#1844=ORIENTED_EDGE('',*,*,#1845,.T.);+#1845=EDGE_CURVE('',#1842,#1846,#1580,.T.);+#1846=VERTEX_POINT('',#1847);+#1847=CARTESIAN_POINT('',(6.925,-4.91,0.85));+#1848=ORIENTED_EDGE('',*,*,#1849,.T.);+#1849=EDGE_CURVE('',#1846,#1850,#1580,.T.);+#1850=VERTEX_POINT('',#1851);+#1851=CARTESIAN_POINT('',(6.925,-5.09,0.85));+#1852=ORIENTED_EDGE('',*,*,#1853,.T.);+#1853=EDGE_CURVE('',#1850,#1854,#1580,.T.);+#1854=VERTEX_POINT('',#1855);+#1855=CARTESIAN_POINT('',(6.925,-5.31,0.85));+#1856=ORIENTED_EDGE('',*,*,#1857,.T.);+#1857=EDGE_CURVE('',#1854,#1858,#1580,.T.);+#1858=VERTEX_POINT('',#1859);+#1859=CARTESIAN_POINT('',(6.925,-5.49,0.85));+#1860=ORIENTED_EDGE('',*,*,#1861,.T.);+#1861=EDGE_CURVE('',#1858,#1862,#1580,.T.);+#1862=VERTEX_POINT('',#1863);+#1863=CARTESIAN_POINT('',(6.925,-5.71,0.85));+#1864=ORIENTED_EDGE('',*,*,#1865,.T.);+#1865=EDGE_CURVE('',#1862,#1866,#1580,.T.);+#1866=VERTEX_POINT('',#1867);+#1867=CARTESIAN_POINT('',(6.925,-5.89,0.85));+#1868=ORIENTED_EDGE('',*,*,#1869,.T.);+#1869=EDGE_CURVE('',#1866,#1870,#1580,.T.);+#1870=VERTEX_POINT('',#1871);+#1871=CARTESIAN_POINT('',(6.925,-6.11,0.85));+#1872=ORIENTED_EDGE('',*,*,#1873,.T.);+#1873=EDGE_CURVE('',#1870,#1874,#1580,.T.);+#1874=VERTEX_POINT('',#1875);+#1875=CARTESIAN_POINT('',(6.925,-6.29,0.85));+#1876=ORIENTED_EDGE('',*,*,#1877,.T.);+#1877=EDGE_CURVE('',#1874,#1608,#1580,.T.);+#1878=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#312,#316),(#1609,#1613)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,13.575),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1879=ADVANCED_FACE('',(#1880),#1905,.T.);+#1880=FACE_BOUND('',#1881,.T.);+#1881=EDGE_LOOP('',(#1882,#1883,#1893,#317));+#1882=ORIENTED_EDGE('',*,*,#365,.T.);+#1883=ORIENTED_EDGE('',*,*,#1884,.T.);+#1884=EDGE_CURVE('',#356,#1885,#1887,.T.);+#1885=VERTEX_POINT('',#1886);+#1886=CARTESIAN_POINT('',(6.746349033255,6.702364620346,1.5));+#1887=B_SPLINE_CURVE_WITH_KNOTS('',2,(#1888,#1889,#1890,#1891,#1892),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.28964361549,-3.998243263537E-02,0.136741676868,0.386402859722),.UNSPECIFIED.);+#1888=CARTESIAN_POINT('',(6.48533830329,6.96337535031,1.5));+#1889=CARTESIAN_POINT('',(6.573606860988,6.875106792612,1.5));+#1890=CARTESIAN_POINT('',(6.7243568268,6.7243568268,1.5));+#1891=CARTESIAN_POINT('',(6.875106792612,6.573606860988,1.5));+#1892=CARTESIAN_POINT('',(6.96337535031,6.48533830329,1.5));+#1893=ORIENTED_EDGE('',*,*,#1894,.F.);+#1894=EDGE_CURVE('',#313,#1885,#1895,.T.);+#1895=B_SPLINE_CURVE_WITH_KNOTS('',8,(#1896,#1897,#1898,#1899,#1900,#1901,#1902,#1903,#1904),.UNSPECIFIED.,.F.,.F.,(9,9),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1896=CARTESIAN_POINT('',(6.795124813083,6.722568209866,1.460996513181));+#1897=CARTESIAN_POINT('',(6.79340419061,6.721855504702,1.468628450826));+#1898=CARTESIAN_POINT('',(6.790211350105,6.720532986862,1.476427534575));+#1899=CARTESIAN_POINT('',(6.785339012166,6.718514798409,1.483943009306));+#1900=CARTESIAN_POINT('',(6.778744741125,6.715783361905,1.490584376373));+#1901=CARTESIAN_POINT('',(6.770804485247,6.712494400238,1.495536600978));+#1902=CARTESIAN_POINT('',(6.762422617514,6.709022516939,1.498611518734));+#1903=CARTESIAN_POINT('',(6.754138333162,6.70559105401,1.500000286476));+#1904=CARTESIAN_POINT('',(6.746349033255,6.702364620345,1.5));+#1905=( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,2,((#320,#321,#322,#323,#324),(#1906,#1907,#1908,#1909,#1910),(#1888,#1889,#1890,#1891,#1892)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,1,1,3),(0.,0.176724109503),(-0.28964361549,-3.998243263537E-02,0.136741676868,0.386402859722),.UNSPECIFIED.) GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE(((1.,1.,1.,1.,1.),(0.781002645201,0.781002645201,0.781002645201,0.781002645201,0.781002645201),(1.,1.,1.,1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#1906=CARTESIAN_POINT('',(6.513610152676,6.991647199696,1.5));+#1907=CARTESIAN_POINT('',(6.601878710374,6.903378641998,1.5));+#1908=CARTESIAN_POINT('',(6.752628676186,6.752628676186,1.5));+#1909=CARTESIAN_POINT('',(6.903378641998,6.601878710374,1.5));+#1910=CARTESIAN_POINT('',(6.991647199696,6.513610152676,1.5));+#1911=ADVANCED_FACE('',(#1912),#1942,.T.);+#1912=FACE_BOUND('',#1913,.T.);+#1913=EDGE_LOOP('',(#1914,#1933,#1941,#1587));+#1914=ORIENTED_EDGE('',*,*,#1915,.T.);+#1915=EDGE_CURVE('',#1589,#1916,#1918,.T.);+#1916=VERTEX_POINT('',#1917);+#1917=CARTESIAN_POINT('',(-6.746349033255,6.702364620346,1.5));+#1918=B_SPLINE_CURVE_WITH_KNOTS('',7,(#1919,#1920,#1921,#1922,#1923,#1924,#1925,#1926,#1927,#1928,#1929,#1930,#1931,#1932),.UNSPECIFIED.,.F.,.F.,(8,6,8),(0.,0.290258418311,1.),.UNSPECIFIED.);+#1919=CARTESIAN_POINT('',(-6.795124813083,6.722568209866,1.460996513181));+#1920=CARTESIAN_POINT('',(-6.794554041325,6.722331788463,1.463528210014));+#1921=CARTESIAN_POINT('',(-6.793818000186,6.72202691024,1.466078526174));+#1922=CARTESIAN_POINT('',(-6.792908255625,6.721650081705,1.468630328774));+#1923=CARTESIAN_POINT('',(-6.791819284084,6.721199014923,1.471163479521));+#1924=CARTESIAN_POINT('',(-6.790549180415,6.720672920758,1.473656008071));+#1925=CARTESIAN_POINT('',(-6.789100365813,6.720072802101,1.476085285382));+#1926=CARTESIAN_POINT('',(-6.783518890952,6.717760879515,1.484160543614));+#1927=CARTESIAN_POINT('',(-6.778533242358,6.715695756228,1.489381305737));+#1928=CARTESIAN_POINT('',(-6.772629908592,6.713250515421,1.493773592534));+#1929=CARTESIAN_POINT('',(-6.766076749535,6.71053610785,1.497032992821));+#1930=CARTESIAN_POINT('',(-6.759316383726,6.707735872908,1.499067393954));+#1931=CARTESIAN_POINT('',(-6.752667518062,6.704981822373,1.500000204988));+#1932=CARTESIAN_POINT('',(-6.746349033255,6.702364620369,1.5));+#1933=ORIENTED_EDGE('',*,*,#1934,.T.);+#1934=EDGE_CURVE('',#1916,#337,#1935,.T.);+#1935=B_SPLINE_CURVE_WITH_KNOTS('',2,(#1936,#1937,#1938,#1939,#1940),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.28964361549,-3.998243263537E-02,0.136741676868,0.386402859722),.UNSPECIFIED.);+#1936=CARTESIAN_POINT('',(-6.96337535031,6.48533830329,1.5));+#1937=CARTESIAN_POINT('',(-6.875106792612,6.573606860988,1.5));+#1938=CARTESIAN_POINT('',(-6.7243568268,6.7243568268,1.5));+#1939=CARTESIAN_POINT('',(-6.573606860988,6.875106792612,1.5));+#1940=CARTESIAN_POINT('',(-6.48533830329,6.96337535031,1.5));+#1941=ORIENTED_EDGE('',*,*,#336,.F.);+#1942=( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,2,((#1592,#1593,#1594,#1595,#1596),(#1943,#1944,#1945,#1946,#1947),(#1936,#1937,#1938,#1939,#1940)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,1,1,3),(0.,0.176724109503),(-0.28964361549,-3.998243263537E-02,0.136741676868,0.386402859722),.UNSPECIFIED.) GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE(((1.,1.,1.,1.,1.),(0.781002645201,0.781002645201,0.781002645201,0.781002645201,0.781002645201),(1.,1.,1.,1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#1943=CARTESIAN_POINT('',(-6.991647199696,6.513610152676,1.5));+#1944=CARTESIAN_POINT('',(-6.903378641998,6.601878710374,1.5));+#1945=CARTESIAN_POINT('',(-6.752628676186,6.752628676186,1.5));+#1946=CARTESIAN_POINT('',(-6.601878710374,6.903378641998,1.5));+#1947=CARTESIAN_POINT('',(-6.513610152676,6.991647199696,1.5));+#1948=ADVANCED_FACE('',(#1949,#2002),#2012,.T.);+#1949=FACE_BOUND('',#1950,.T.);+#1950=EDGE_LOOP('',(#1951,#1952,#1953,#1963,#1973,#1983,#1993,#2001));+#1951=ORIENTED_EDGE('',*,*,#355,.F.);+#1952=ORIENTED_EDGE('',*,*,#1934,.F.);+#1953=ORIENTED_EDGE('',*,*,#1954,.F.);+#1954=EDGE_CURVE('',#1955,#1916,#1957,.T.);+#1955=VERTEX_POINT('',#1956);+#1956=CARTESIAN_POINT('',(-6.746349033255,-6.702364620346,1.5));+#1957=B_SPLINE_CURVE_WITH_KNOTS('',2,(#1958,#1959,#1960,#1961,#1962),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.698356801641,-4.048920165974E-02,13.477327436574,14.135195036556),.UNSPECIFIED.);+#1958=CARTESIAN_POINT('',(-6.746349033255,-7.416775919098,1.5));+#1959=CARTESIAN_POINT('',(-6.746349033255,-7.087842119108,1.5));+#1960=CARTESIAN_POINT('',(-6.746349033255,1.391832168124E-16,1.5));+#1961=CARTESIAN_POINT('',(-6.746349033255,7.087842119108,1.5));+#1962=CARTESIAN_POINT('',(-6.746349033255,7.416775919098,1.5));+#1963=ORIENTED_EDGE('',*,*,#1964,.F.);+#1964=EDGE_CURVE('',#1965,#1955,#1967,.T.);+#1965=VERTEX_POINT('',#1966);+#1966=CARTESIAN_POINT('',(-6.702364620346,-6.746349033255,1.5));+#1967=B_SPLINE_CURVE_WITH_KNOTS('',2,(#1968,#1969,#1970,#1971,#1972),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.28964361549,-3.998243263536E-02,0.136741676868,0.386402859722),.UNSPECIFIED.);+#1968=CARTESIAN_POINT('',(-6.48533830329,-6.96337535031,1.5));+#1969=CARTESIAN_POINT('',(-6.573606860988,-6.875106792612,1.5));+#1970=CARTESIAN_POINT('',(-6.7243568268,-6.7243568268,1.5));+#1971=CARTESIAN_POINT('',(-6.875106792612,-6.573606860988,1.5));+#1972=CARTESIAN_POINT('',(-6.96337535031,-6.48533830329,1.5));+#1973=ORIENTED_EDGE('',*,*,#1974,.F.);+#1974=EDGE_CURVE('',#1975,#1965,#1977,.T.);+#1975=VERTEX_POINT('',#1976);+#1976=CARTESIAN_POINT('',(6.702364620346,-6.746349033255,1.5));+#1977=B_SPLINE_CURVE_WITH_KNOTS('',2,(#1978,#1979,#1980,#1981,#1982),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.698356801641,-4.048920165973E-02,13.477327436574,14.135195036556),.UNSPECIFIED.);+#1978=CARTESIAN_POINT('',(7.416775919098,-6.746349033255,1.5));+#1979=CARTESIAN_POINT('',(7.087842119108,-6.746349033255,1.5));+#1980=CARTESIAN_POINT('',(-1.915540056213E-15,-6.746349033255,1.5));+#1981=CARTESIAN_POINT('',(-7.087842119108,-6.746349033255,1.5));+#1982=CARTESIAN_POINT('',(-7.416775919098,-6.746349033255,1.5));+#1983=ORIENTED_EDGE('',*,*,#1984,.F.);+#1984=EDGE_CURVE('',#1985,#1975,#1987,.T.);+#1985=VERTEX_POINT('',#1986);+#1986=CARTESIAN_POINT('',(6.746349033255,-6.702364620346,1.5));+#1987=B_SPLINE_CURVE_WITH_KNOTS('',2,(#1988,#1989,#1990,#1991,#1992),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.28964361549,-3.998243263536E-02,0.136741676868,0.386402859722),.UNSPECIFIED.);+#1988=CARTESIAN_POINT('',(6.96337535031,-6.48533830329,1.5));+#1989=CARTESIAN_POINT('',(6.875106792612,-6.573606860988,1.5));+#1990=CARTESIAN_POINT('',(6.7243568268,-6.7243568268,1.5));+#1991=CARTESIAN_POINT('',(6.573606860988,-6.875106792612,1.5));+#1992=CARTESIAN_POINT('',(6.48533830329,-6.96337535031,1.5));+#1993=ORIENTED_EDGE('',*,*,#1994,.F.);+#1994=EDGE_CURVE('',#1885,#1985,#1995,.T.);+#1995=B_SPLINE_CURVE_WITH_KNOTS('',2,(#1996,#1997,#1998,#1999,#2000),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.698356801641,-4.048920165974E-02,13.477327436574,14.135195036556),.UNSPECIFIED.);+#1996=CARTESIAN_POINT('',(6.746349033255,7.416775919098,1.5));+#1997=CARTESIAN_POINT('',(6.746349033255,7.087842119108,1.5));+#1998=CARTESIAN_POINT('',(6.746349033255,1.637173622588E-15,1.5));+#1999=CARTESIAN_POINT('',(6.746349033255,-7.087842119108,1.5));+#2000=CARTESIAN_POINT('',(6.746349033255,-7.416775919098,1.5));+#2001=ORIENTED_EDGE('',*,*,#1884,.F.);+#2002=FACE_BOUND('',#2003,.T.);+#2003=EDGE_LOOP('',(#2004));+#2004=ORIENTED_EDGE('',*,*,#2005,.T.);+#2005=EDGE_CURVE('',#2006,#2006,#2008,.T.);+#2006=VERTEX_POINT('',#2007);+#2007=CARTESIAN_POINT('',(-6.086838234914,5.836838234914,1.5));+#2008=CIRCLE('',#2009,0.25);+#2009=AXIS2_PLACEMENT_3D('',#2010,#2011,#1569);+#2010=CARTESIAN_POINT('',(-6.086838234914,6.086838234914,1.5));+#2011=DIRECTION('',(0.,-0.,-1.));+#2012=PLANE('',#2013);+#2013=AXIS2_PLACEMENT_3D('',#43,#13,#2014);+#2014=DIRECTION('',(0.70351547258,-0.710679941915,0.));+#2015=ADVANCED_FACE('',(#2016),#2032,.F.);+#2016=FACE_BOUND('',#2017,.F.);+#2017=EDGE_LOOP('',(#2018,#2025,#2028,#2029));+#2018=ORIENTED_EDGE('',*,*,#2019,.T.);+#2019=EDGE_CURVE('',#2020,#2022,#2024,.T.);+#2020=VERTEX_POINT('',#2021);+#2021=CARTESIAN_POINT('',(-7.,6.825,0.75));+#2022=VERTEX_POINT('',#2023);+#2023=CARTESIAN_POINT('',(-6.825,7.,0.75));+#2024=LINE('',#2021,#396);+#2025=ORIENTED_EDGE('',*,*,#2026,.T.);+#2026=EDGE_CURVE('',#2022,#393,#2027,.T.);+#2027=B_SPLINE_CURVE_WITH_KNOTS('',1,(#2023,#394),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2028=ORIENTED_EDGE('',*,*,#390,.F.);+#2029=ORIENTED_EDGE('',*,*,#2030,.F.);+#2030=EDGE_CURVE('',#2020,#391,#2031,.T.);+#2031=B_SPLINE_CURVE_WITH_KNOTS('',1,(#2021,#392),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2032=PLANE('',#2033);+#2033=AXIS2_PLACEMENT_3D('',#392,#330,#397);+#2034=ADVANCED_FACE('',(#2035),#2050,.F.);+#2035=FACE_BOUND('',#2036,.F.);+#2036=EDGE_LOOP('',(#2037,#2044,#2048,#2049));+#2037=ORIENTED_EDGE('',*,*,#2038,.F.);+#2038=EDGE_CURVE('',#2039,#425,#2041,.T.);+#2039=VERTEX_POINT('',#2040);+#2040=CARTESIAN_POINT('',(-7.,6.29,0.75));+#2041=LINE('',#2042,#2043);+#2042=CARTESIAN_POINT('',(-7.,6.29,0.630119079428));+#2043=VECTOR('',#13,1.);+#2044=ORIENTED_EDGE('',*,*,#2045,.T.);+#2045=EDGE_CURVE('',#2039,#2020,#2046,.T.);+#2046=LINE('',#2047,#421);+#2047=CARTESIAN_POINT('',(-7.,-6.825,0.75));+#2048=ORIENTED_EDGE('',*,*,#2030,.T.);+#2049=ORIENTED_EDGE('',*,*,#432,.F.);+#2050=PLANE('',#2051);+#2051=AXIS2_PLACEMENT_3D('',#434,#50,#422);+#2052=ADVANCED_FACE('',(#2053),#2077,.F.);+#2053=FACE_BOUND('',#2054,.F.);+#2054=EDGE_LOOP('',(#2055,#2062,#2068,#2070,#2071,#2075));+#2055=ORIENTED_EDGE('',*,*,#2056,.F.);+#2056=EDGE_CURVE('',#2057,#2059,#2061,.T.);+#2057=VERTEX_POINT('',#2058);+#2058=CARTESIAN_POINT('',(-7.2,6.11,0.85));+#2059=VERTEX_POINT('',#2060);+#2060=CARTESIAN_POINT('',(-7.,6.11,0.85));+#2061=LINE('',#2058,#429);+#2062=ORIENTED_EDGE('',*,*,#2063,.T.);+#2063=EDGE_CURVE('',#2057,#2064,#2065,.T.);+#2064=VERTEX_POINT('',#428);+#2065=LINE('',#2058,#2066);+#2066=VECTOR('',#2067,1.);+#2067=DIRECTION('',(1.144237745222E-17,1.,0.));+#2068=ORIENTED_EDGE('',*,*,#2069,.T.);+#2069=EDGE_CURVE('',#2064,#425,#427,.T.);+#2070=ORIENTED_EDGE('',*,*,#424,.T.);+#2071=ORIENTED_EDGE('',*,*,#2072,.F.);+#2072=EDGE_CURVE('',#2073,#417,#419,.T.);+#2073=VERTEX_POINT('',#2074);+#2074=CARTESIAN_POINT('',(-6.925,6.11,0.85));+#2075=ORIENTED_EDGE('',*,*,#2076,.F.);+#2076=EDGE_CURVE('',#2059,#2073,#2061,.T.);+#2077=PLANE('',#2078);+#2078=AXIS2_PLACEMENT_3D('',#2058,#464,#430);+#2079=ADVANCED_FACE('',(#2080),#2350,.F.);+#2080=FACE_BOUND('',#2081,.F.);+#2081=EDGE_LOOP('',(#2082,#2083,#2093,#2098,#2102,#2106,#2110,#2114,#2118,#2122,#2126,#2130,#2134,#2138,#2142,#2146,#2150,#2154,#2158,#2162,#2166,#2170,#2174,#2178,#2182,#2186,#2190,#2194,#2198,#2202,#2206,#2210,#2214,#2218,#2222,#2226,#2230,#2234,#2238,#2242,#2246,#2250,#2254,#2258,#2262,#2266,#2270,#2274,#2278,#2282,#2286,#2290,#2294,#2298,#2302,#2306,#2310,#2314,#2318,#2322,#2326,#2330,#2334,#2338,#2342,#2346,#2348,#2349));+#2082=ORIENTED_EDGE('',*,*,#1598,.T.);+#2083=ORIENTED_EDGE('',*,*,#2084,.F.);+#2084=EDGE_CURVE('',#2085,#1589,#2087,.T.);+#2085=VERTEX_POINT('',#2086);+#2086=CARTESIAN_POINT('',(-6.795128681966,-6.722564340983,1.460996513181));+#2087=B_SPLINE_CURVE_WITH_KNOTS('',2,(#2088,#2089,#2090,#2091,#2092),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.698356801641,-4.048920165974E-02,13.477327436574,14.135195036556),.UNSPECIFIED.);+#2088=CARTESIAN_POINT('',(-6.795256413291,-7.416775919098,1.460395584541));+#2089=CARTESIAN_POINT('',(-6.795256413291,-7.087842119108,1.460395584541));+#2090=CARTESIAN_POINT('',(-6.795256413291,1.337534068733E-16,1.460395584541));+#2091=CARTESIAN_POINT('',(-6.795256413291,7.087842119108,1.460395584541));+#2092=CARTESIAN_POINT('',(-6.795256413291,7.416775919098,1.460395584541));+#2093=ORIENTED_EDGE('',*,*,#2094,.F.);+#2094=EDGE_CURVE('',#2095,#2085,#2096,.T.);+#2095=VERTEX_POINT('',#420);+#2096=B_SPLINE_CURVE_WITH_KNOTS('',1,(#420,#2097),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2097=CARTESIAN_POINT('',(-6.786838234914,-6.718419117457,1.5));+#2098=ORIENTED_EDGE('',*,*,#2099,.T.);+#2099=EDGE_CURVE('',#2095,#2100,#419,.T.);+#2100=VERTEX_POINT('',#2101);+#2101=CARTESIAN_POINT('',(-6.925,-6.29,0.85));+#2102=ORIENTED_EDGE('',*,*,#2103,.T.);+#2103=EDGE_CURVE('',#2100,#2104,#419,.T.);+#2104=VERTEX_POINT('',#2105);+#2105=CARTESIAN_POINT('',(-6.925,-6.11,0.85));+#2106=ORIENTED_EDGE('',*,*,#2107,.T.);+#2107=EDGE_CURVE('',#2104,#2108,#419,.T.);+#2108=VERTEX_POINT('',#2109);+#2109=CARTESIAN_POINT('',(-6.925,-5.89,0.85));+#2110=ORIENTED_EDGE('',*,*,#2111,.T.);+#2111=EDGE_CURVE('',#2108,#2112,#419,.T.);+#2112=VERTEX_POINT('',#2113);+#2113=CARTESIAN_POINT('',(-6.925,-5.71,0.85));+#2114=ORIENTED_EDGE('',*,*,#2115,.T.);+#2115=EDGE_CURVE('',#2112,#2116,#419,.T.);+#2116=VERTEX_POINT('',#2117);+#2117=CARTESIAN_POINT('',(-6.925,-5.49,0.85));+#2118=ORIENTED_EDGE('',*,*,#2119,.T.);+#2119=EDGE_CURVE('',#2116,#2120,#419,.T.);+#2120=VERTEX_POINT('',#2121);+#2121=CARTESIAN_POINT('',(-6.925,-5.31,0.85));+#2122=ORIENTED_EDGE('',*,*,#2123,.T.);+#2123=EDGE_CURVE('',#2120,#2124,#419,.T.);+#2124=VERTEX_POINT('',#2125);+#2125=CARTESIAN_POINT('',(-6.925,-5.09,0.85));+#2126=ORIENTED_EDGE('',*,*,#2127,.T.);+#2127=EDGE_CURVE('',#2124,#2128,#419,.T.);+#2128=VERTEX_POINT('',#2129);+#2129=CARTESIAN_POINT('',(-6.925,-4.91,0.85));+#2130=ORIENTED_EDGE('',*,*,#2131,.T.);+#2131=EDGE_CURVE('',#2128,#2132,#419,.T.);+#2132=VERTEX_POINT('',#2133);+#2133=CARTESIAN_POINT('',(-6.925,-4.69,0.85));+#2134=ORIENTED_EDGE('',*,*,#2135,.T.);+#2135=EDGE_CURVE('',#2132,#2136,#419,.T.);+#2136=VERTEX_POINT('',#2137);+#2137=CARTESIAN_POINT('',(-6.925,-4.51,0.85));+#2138=ORIENTED_EDGE('',*,*,#2139,.T.);+#2139=EDGE_CURVE('',#2136,#2140,#419,.T.);+#2140=VERTEX_POINT('',#2141);+#2141=CARTESIAN_POINT('',(-6.925,-4.29,0.85));+#2142=ORIENTED_EDGE('',*,*,#2143,.T.);+#2143=EDGE_CURVE('',#2140,#2144,#419,.T.);+#2144=VERTEX_POINT('',#2145);+#2145=CARTESIAN_POINT('',(-6.925,-4.11,0.85));+#2146=ORIENTED_EDGE('',*,*,#2147,.T.);+#2147=EDGE_CURVE('',#2144,#2148,#419,.T.);+#2148=VERTEX_POINT('',#2149);+#2149=CARTESIAN_POINT('',(-6.925,-3.89,0.85));+#2150=ORIENTED_EDGE('',*,*,#2151,.T.);+#2151=EDGE_CURVE('',#2148,#2152,#419,.T.);+#2152=VERTEX_POINT('',#2153);+#2153=CARTESIAN_POINT('',(-6.925,-3.71,0.85));+#2154=ORIENTED_EDGE('',*,*,#2155,.T.);+#2155=EDGE_CURVE('',#2152,#2156,#419,.T.);+#2156=VERTEX_POINT('',#2157);+#2157=CARTESIAN_POINT('',(-6.925,-3.49,0.85));+#2158=ORIENTED_EDGE('',*,*,#2159,.T.);+#2159=EDGE_CURVE('',#2156,#2160,#419,.T.);+#2160=VERTEX_POINT('',#2161);+#2161=CARTESIAN_POINT('',(-6.925,-3.31,0.85));+#2162=ORIENTED_EDGE('',*,*,#2163,.T.);+#2163=EDGE_CURVE('',#2160,#2164,#419,.T.);+#2164=VERTEX_POINT('',#2165);+#2165=CARTESIAN_POINT('',(-6.925,-3.09,0.85));+#2166=ORIENTED_EDGE('',*,*,#2167,.T.);+#2167=EDGE_CURVE('',#2164,#2168,#419,.T.);+#2168=VERTEX_POINT('',#2169);+#2169=CARTESIAN_POINT('',(-6.925,-2.91,0.85));+#2170=ORIENTED_EDGE('',*,*,#2171,.T.);+#2171=EDGE_CURVE('',#2168,#2172,#419,.T.);+#2172=VERTEX_POINT('',#2173);+#2173=CARTESIAN_POINT('',(-6.925,-2.69,0.85));+#2174=ORIENTED_EDGE('',*,*,#2175,.T.);+#2175=EDGE_CURVE('',#2172,#2176,#419,.T.);+#2176=VERTEX_POINT('',#2177);+#2177=CARTESIAN_POINT('',(-6.925,-2.51,0.85));+#2178=ORIENTED_EDGE('',*,*,#2179,.T.);+#2179=EDGE_CURVE('',#2176,#2180,#419,.T.);+#2180=VERTEX_POINT('',#2181);+#2181=CARTESIAN_POINT('',(-6.925,-2.29,0.85));+#2182=ORIENTED_EDGE('',*,*,#2183,.T.);+#2183=EDGE_CURVE('',#2180,#2184,#419,.T.);+#2184=VERTEX_POINT('',#2185);+#2185=CARTESIAN_POINT('',(-6.925,-2.11,0.85));+#2186=ORIENTED_EDGE('',*,*,#2187,.T.);+#2187=EDGE_CURVE('',#2184,#2188,#419,.T.);+#2188=VERTEX_POINT('',#2189);+#2189=CARTESIAN_POINT('',(-6.925,-1.89,0.85));+#2190=ORIENTED_EDGE('',*,*,#2191,.T.);+#2191=EDGE_CURVE('',#2188,#2192,#419,.T.);+#2192=VERTEX_POINT('',#2193);+#2193=CARTESIAN_POINT('',(-6.925,-1.71,0.85));+#2194=ORIENTED_EDGE('',*,*,#2195,.T.);+#2195=EDGE_CURVE('',#2192,#2196,#419,.T.);+#2196=VERTEX_POINT('',#2197);+#2197=CARTESIAN_POINT('',(-6.925,-1.49,0.85));+#2198=ORIENTED_EDGE('',*,*,#2199,.T.);+#2199=EDGE_CURVE('',#2196,#2200,#419,.T.);+#2200=VERTEX_POINT('',#2201);+#2201=CARTESIAN_POINT('',(-6.925,-1.31,0.85));+#2202=ORIENTED_EDGE('',*,*,#2203,.T.);+#2203=EDGE_CURVE('',#2200,#2204,#419,.T.);+#2204=VERTEX_POINT('',#2205);+#2205=CARTESIAN_POINT('',(-6.925,-1.09,0.85));+#2206=ORIENTED_EDGE('',*,*,#2207,.T.);+#2207=EDGE_CURVE('',#2204,#2208,#419,.T.);+#2208=VERTEX_POINT('',#2209);+#2209=CARTESIAN_POINT('',(-6.925,-0.91,0.85));+#2210=ORIENTED_EDGE('',*,*,#2211,.T.);+#2211=EDGE_CURVE('',#2208,#2212,#419,.T.);+#2212=VERTEX_POINT('',#2213);+#2213=CARTESIAN_POINT('',(-6.925,-0.69,0.85));+#2214=ORIENTED_EDGE('',*,*,#2215,.T.);+#2215=EDGE_CURVE('',#2212,#2216,#419,.T.);+#2216=VERTEX_POINT('',#2217);+#2217=CARTESIAN_POINT('',(-6.925,-0.51,0.85));+#2218=ORIENTED_EDGE('',*,*,#2219,.T.);+#2219=EDGE_CURVE('',#2216,#2220,#419,.T.);+#2220=VERTEX_POINT('',#2221);+#2221=CARTESIAN_POINT('',(-6.925,-0.29,0.85));+#2222=ORIENTED_EDGE('',*,*,#2223,.T.);+#2223=EDGE_CURVE('',#2220,#2224,#419,.T.);+#2224=VERTEX_POINT('',#2225);+#2225=CARTESIAN_POINT('',(-6.925,-0.11,0.85));+#2226=ORIENTED_EDGE('',*,*,#2227,.T.);+#2227=EDGE_CURVE('',#2224,#2228,#419,.T.);+#2228=VERTEX_POINT('',#2229);+#2229=CARTESIAN_POINT('',(-6.925,0.11,0.85));+#2230=ORIENTED_EDGE('',*,*,#2231,.T.);+#2231=EDGE_CURVE('',#2228,#2232,#419,.T.);+#2232=VERTEX_POINT('',#2233);+#2233=CARTESIAN_POINT('',(-6.925,0.29,0.85));+#2234=ORIENTED_EDGE('',*,*,#2235,.T.);+#2235=EDGE_CURVE('',#2232,#2236,#419,.T.);+#2236=VERTEX_POINT('',#2237);+#2237=CARTESIAN_POINT('',(-6.925,0.51,0.85));+#2238=ORIENTED_EDGE('',*,*,#2239,.T.);+#2239=EDGE_CURVE('',#2236,#2240,#419,.T.);+#2240=VERTEX_POINT('',#2241);+#2241=CARTESIAN_POINT('',(-6.925,0.69,0.85));+#2242=ORIENTED_EDGE('',*,*,#2243,.T.);+#2243=EDGE_CURVE('',#2240,#2244,#419,.T.);+#2244=VERTEX_POINT('',#2245);+#2245=CARTESIAN_POINT('',(-6.925,0.91,0.85));+#2246=ORIENTED_EDGE('',*,*,#2247,.T.);+#2247=EDGE_CURVE('',#2244,#2248,#419,.T.);+#2248=VERTEX_POINT('',#2249);+#2249=CARTESIAN_POINT('',(-6.925,1.09,0.85));+#2250=ORIENTED_EDGE('',*,*,#2251,.T.);+#2251=EDGE_CURVE('',#2248,#2252,#419,.T.);+#2252=VERTEX_POINT('',#2253);+#2253=CARTESIAN_POINT('',(-6.925,1.31,0.85));+#2254=ORIENTED_EDGE('',*,*,#2255,.T.);+#2255=EDGE_CURVE('',#2252,#2256,#419,.T.);+#2256=VERTEX_POINT('',#2257);+#2257=CARTESIAN_POINT('',(-6.925,1.49,0.85));+#2258=ORIENTED_EDGE('',*,*,#2259,.T.);+#2259=EDGE_CURVE('',#2256,#2260,#419,.T.);+#2260=VERTEX_POINT('',#2261);+#2261=CARTESIAN_POINT('',(-6.925,1.71,0.85));+#2262=ORIENTED_EDGE('',*,*,#2263,.T.);+#2263=EDGE_CURVE('',#2260,#2264,#419,.T.);+#2264=VERTEX_POINT('',#2265);+#2265=CARTESIAN_POINT('',(-6.925,1.89,0.85));+#2266=ORIENTED_EDGE('',*,*,#2267,.T.);+#2267=EDGE_CURVE('',#2264,#2268,#419,.T.);+#2268=VERTEX_POINT('',#2269);+#2269=CARTESIAN_POINT('',(-6.925,2.11,0.85));+#2270=ORIENTED_EDGE('',*,*,#2271,.T.);+#2271=EDGE_CURVE('',#2268,#2272,#419,.T.);+#2272=VERTEX_POINT('',#2273);+#2273=CARTESIAN_POINT('',(-6.925,2.29,0.85));+#2274=ORIENTED_EDGE('',*,*,#2275,.T.);+#2275=EDGE_CURVE('',#2272,#2276,#419,.T.);+#2276=VERTEX_POINT('',#2277);+#2277=CARTESIAN_POINT('',(-6.925,2.51,0.85));+#2278=ORIENTED_EDGE('',*,*,#2279,.T.);+#2279=EDGE_CURVE('',#2276,#2280,#419,.T.);+#2280=VERTEX_POINT('',#2281);+#2281=CARTESIAN_POINT('',(-6.925,2.69,0.85));+#2282=ORIENTED_EDGE('',*,*,#2283,.T.);+#2283=EDGE_CURVE('',#2280,#2284,#419,.T.);+#2284=VERTEX_POINT('',#2285);+#2285=CARTESIAN_POINT('',(-6.925,2.91,0.85));+#2286=ORIENTED_EDGE('',*,*,#2287,.T.);+#2287=EDGE_CURVE('',#2284,#2288,#419,.T.);+#2288=VERTEX_POINT('',#2289);+#2289=CARTESIAN_POINT('',(-6.925,3.09,0.85));+#2290=ORIENTED_EDGE('',*,*,#2291,.T.);+#2291=EDGE_CURVE('',#2288,#2292,#419,.T.);+#2292=VERTEX_POINT('',#2293);+#2293=CARTESIAN_POINT('',(-6.925,3.31,0.85));+#2294=ORIENTED_EDGE('',*,*,#2295,.T.);+#2295=EDGE_CURVE('',#2292,#2296,#419,.T.);+#2296=VERTEX_POINT('',#2297);+#2297=CARTESIAN_POINT('',(-6.925,3.49,0.85));+#2298=ORIENTED_EDGE('',*,*,#2299,.T.);+#2299=EDGE_CURVE('',#2296,#2300,#419,.T.);+#2300=VERTEX_POINT('',#2301);+#2301=CARTESIAN_POINT('',(-6.925,3.71,0.85));+#2302=ORIENTED_EDGE('',*,*,#2303,.T.);+#2303=EDGE_CURVE('',#2300,#2304,#419,.T.);+#2304=VERTEX_POINT('',#2305);+#2305=CARTESIAN_POINT('',(-6.925,3.89,0.85));+#2306=ORIENTED_EDGE('',*,*,#2307,.T.);+#2307=EDGE_CURVE('',#2304,#2308,#419,.T.);+#2308=VERTEX_POINT('',#2309);+#2309=CARTESIAN_POINT('',(-6.925,4.11,0.85));+#2310=ORIENTED_EDGE('',*,*,#2311,.T.);+#2311=EDGE_CURVE('',#2308,#2312,#419,.T.);+#2312=VERTEX_POINT('',#2313);+#2313=CARTESIAN_POINT('',(-6.925,4.29,0.85));+#2314=ORIENTED_EDGE('',*,*,#2315,.T.);+#2315=EDGE_CURVE('',#2312,#2316,#419,.T.);+#2316=VERTEX_POINT('',#2317);+#2317=CARTESIAN_POINT('',(-6.925,4.51,0.85));+#2318=ORIENTED_EDGE('',*,*,#2319,.T.);+#2319=EDGE_CURVE('',#2316,#2320,#419,.T.);+#2320=VERTEX_POINT('',#2321);+#2321=CARTESIAN_POINT('',(-6.925,4.69,0.85));+#2322=ORIENTED_EDGE('',*,*,#2323,.T.);+#2323=EDGE_CURVE('',#2320,#2324,#419,.T.);+#2324=VERTEX_POINT('',#2325);+#2325=CARTESIAN_POINT('',(-6.925,4.91,0.85));+#2326=ORIENTED_EDGE('',*,*,#2327,.T.);+#2327=EDGE_CURVE('',#2324,#2328,#419,.T.);+#2328=VERTEX_POINT('',#2329);+#2329=CARTESIAN_POINT('',(-6.925,5.09,0.85));+#2330=ORIENTED_EDGE('',*,*,#2331,.T.);+#2331=EDGE_CURVE('',#2328,#2332,#419,.T.);+#2332=VERTEX_POINT('',#2333);+#2333=CARTESIAN_POINT('',(-6.925,5.31,0.85));+#2334=ORIENTED_EDGE('',*,*,#2335,.T.);+#2335=EDGE_CURVE('',#2332,#2336,#419,.T.);+#2336=VERTEX_POINT('',#2337);+#2337=CARTESIAN_POINT('',(-6.925,5.49,0.85));+#2338=ORIENTED_EDGE('',*,*,#2339,.T.);+#2339=EDGE_CURVE('',#2336,#2340,#419,.T.);+#2340=VERTEX_POINT('',#2341);+#2341=CARTESIAN_POINT('',(-6.925,5.71,0.85));+#2342=ORIENTED_EDGE('',*,*,#2343,.T.);+#2343=EDGE_CURVE('',#2340,#2344,#419,.T.);+#2344=VERTEX_POINT('',#2345);+#2345=CARTESIAN_POINT('',(-6.925,5.89,0.85));+#2346=ORIENTED_EDGE('',*,*,#2347,.T.);+#2347=EDGE_CURVE('',#2344,#2073,#419,.T.);+#2348=ORIENTED_EDGE('',*,*,#2072,.T.);+#2349=ORIENTED_EDGE('',*,*,#416,.T.);+#2350=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#420,#2097),(#413,#1600)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,13.575),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2351=ADVANCED_FACE('',(#2352),#2365,.F.);+#2352=FACE_BOUND('',#2353,.F.);+#2353=EDGE_LOOP('',(#2354,#2355,#2360,#2364));+#2354=ORIENTED_EDGE('',*,*,#2026,.F.);+#2355=ORIENTED_EDGE('',*,*,#2356,.T.);+#2356=EDGE_CURVE('',#2022,#2357,#2359,.T.);+#2357=VERTEX_POINT('',#2358);+#2358=CARTESIAN_POINT('',(-6.29,7.,0.75));+#2359=LINE('',#2023,#49);+#2360=ORIENTED_EDGE('',*,*,#2361,.T.);+#2361=EDGE_CURVE('',#2357,#400,#2362,.T.);+#2362=LINE('',#2363,#2043);+#2363=CARTESIAN_POINT('',(-6.29,7.,0.630119079428));+#2364=ORIENTED_EDGE('',*,*,#399,.F.);+#2365=PLANE('',#2366);+#2366=AXIS2_PLACEMENT_3D('',#394,#1569,#50);+#2367=ADVANCED_FACE('',(#2368),#2439,.F.);+#2368=FACE_BOUND('',#2369,.F.);+#2369=EDGE_LOOP('',(#2370,#2371,#2379,#2388,#2395,#2403,#2408,#2413,#2418,#2426,#2433,#2438));+#2370=ORIENTED_EDGE('',*,*,#2361,.F.);+#2371=ORIENTED_EDGE('',*,*,#2372,.T.);+#2372=EDGE_CURVE('',#2357,#2373,#2375,.T.);+#2373=VERTEX_POINT('',#2374);+#2374=CARTESIAN_POINT('',(-6.29,7.2,0.75));+#2375=LINE('',#2376,#2377);+#2376=CARTESIAN_POINT('',(-6.29,6.85,0.75));+#2377=VECTOR('',#2378,1.);+#2378=DIRECTION('',(0.,1.,0.));+#2379=ORIENTED_EDGE('',*,*,#2380,.T.);+#2380=EDGE_CURVE('',#2373,#2381,#2383,.T.);+#2381=VERTEX_POINT('',#2382);+#2382=CARTESIAN_POINT('',(-6.29,7.298480775301,0.667364817767));+#2383=CIRCLE('',#2384,0.1);+#2384=AXIS2_PLACEMENT_3D('',#2385,#2386,#2387);+#2385=CARTESIAN_POINT('',(-6.29,7.2,0.65));+#2386=DIRECTION('',(-1.,0.,0.));+#2387=DIRECTION('',(0.,-8.881784197001E-15,1.));+#2388=ORIENTED_EDGE('',*,*,#2389,.T.);+#2389=EDGE_CURVE('',#2381,#2390,#2392,.T.);+#2390=VERTEX_POINT('',#2391);+#2391=CARTESIAN_POINT('',(-6.29,7.382385590716,0.165270364467));+#2392=LINE('',#2382,#2393);+#2393=VECTOR('',#2394,1.);+#2394=DIRECTION('',(0.,0.16482406317,-0.986322983713));+#2395=ORIENTED_EDGE('',*,*,#2396,.T.);+#2396=EDGE_CURVE('',#2390,#2397,#2399,.T.);+#2397=VERTEX_POINT('',#2398);+#2398=CARTESIAN_POINT('',(-6.29,7.579347141319,1.387778780781E-16));+#2399=CIRCLE('',#2400,0.2);+#2400=AXIS2_PLACEMENT_3D('',#2401,#452,#2402);+#2401=CARTESIAN_POINT('',(-6.29,7.579347141319,0.2));+#2402=DIRECTION('',(0.,-0.984807753012,-0.173648177667));+#2403=ORIENTED_EDGE('',*,*,#2404,.T.);+#2404=EDGE_CURVE('',#2397,#2405,#2407,.T.);+#2405=VERTEX_POINT('',#2406);+#2406=CARTESIAN_POINT('',(-6.29,8.,1.387778780781E-16));+#2407=LINE('',#2398,#2377);+#2408=ORIENTED_EDGE('',*,*,#2409,.T.);+#2409=EDGE_CURVE('',#2405,#2410,#2412,.T.);+#2410=VERTEX_POINT('',#2411);+#2411=CARTESIAN_POINT('',(-6.29,8.,0.1));+#2412=LINE('',#2406,#2043);+#2413=ORIENTED_EDGE('',*,*,#2414,.T.);+#2414=EDGE_CURVE('',#2410,#2415,#2417,.T.);+#2415=VERTEX_POINT('',#2416);+#2416=CARTESIAN_POINT('',(-6.29,7.579347141319,0.1));+#2417=LINE('',#2411,#407);+#2418=ORIENTED_EDGE('',*,*,#2419,.T.);+#2419=EDGE_CURVE('',#2415,#2420,#2422,.T.);+#2420=VERTEX_POINT('',#2421);+#2421=CARTESIAN_POINT('',(-6.29,7.480866366018,0.182635182233));+#2422=CIRCLE('',#2423,1.E-01);+#2423=AXIS2_PLACEMENT_3D('',#2401,#2424,#2425);+#2424=DIRECTION('',(-1.,0.,-0.));+#2425=DIRECTION('',(0.,8.881784197001E-15,-1.));+#2426=ORIENTED_EDGE('',*,*,#2427,.T.);+#2427=EDGE_CURVE('',#2420,#2428,#2430,.T.);+#2428=VERTEX_POINT('',#2429);+#2429=CARTESIAN_POINT('',(-6.29,7.396961550602,0.684729635533));+#2430=LINE('',#2421,#2431);+#2431=VECTOR('',#2432,1.);+#2432=DIRECTION('',(0.,-0.16482406317,0.986322983713));+#2433=ORIENTED_EDGE('',*,*,#2434,.T.);+#2434=EDGE_CURVE('',#2428,#445,#2435,.T.);+#2435=CIRCLE('',#2436,0.2);+#2436=AXIS2_PLACEMENT_3D('',#2385,#14,#2437);+#2437=DIRECTION('',(0.,0.984807753012,0.173648177667));+#2438=ORIENTED_EDGE('',*,*,#444,.T.);+#2439=PLANE('',#2440);+#2440=AXIS2_PLACEMENT_3D('',#2441,#452,#13);+#2441=CARTESIAN_POINT('',(-6.29,7.414276639233,0.410238158856));+#2442=ADVANCED_FACE('',(#2443),#2506,.T.);+#2443=FACE_BOUND('',#2444,.T.);+#2444=EDGE_LOOP('',(#2445,#2451,#2457,#2464,#2469,#2476,#2481,#2486,#2491,#2497,#2502,#453));+#2445=ORIENTED_EDGE('',*,*,#2446,.F.);+#2446=EDGE_CURVE('',#2447,#455,#2449,.T.);+#2447=VERTEX_POINT('',#2448);+#2448=CARTESIAN_POINT('',(-6.11,7.,0.75));+#2449=LINE('',#2450,#2043);+#2450=CARTESIAN_POINT('',(-6.11,7.,0.630119079428));+#2451=ORIENTED_EDGE('',*,*,#2452,.T.);+#2452=EDGE_CURVE('',#2447,#2453,#2455,.T.);+#2453=VERTEX_POINT('',#2454);+#2454=CARTESIAN_POINT('',(-6.11,7.2,0.75));+#2455=LINE('',#2456,#2377);+#2456=CARTESIAN_POINT('',(-6.11,6.85,0.75));+#2457=ORIENTED_EDGE('',*,*,#2458,.T.);+#2458=EDGE_CURVE('',#2453,#2459,#2461,.T.);+#2459=VERTEX_POINT('',#2460);+#2460=CARTESIAN_POINT('',(-6.11,7.298480775301,0.667364817767));+#2461=CIRCLE('',#2462,0.1);+#2462=AXIS2_PLACEMENT_3D('',#2463,#2386,#2387);+#2463=CARTESIAN_POINT('',(-6.11,7.2,0.65));+#2464=ORIENTED_EDGE('',*,*,#2465,.T.);+#2465=EDGE_CURVE('',#2459,#2466,#2468,.T.);+#2466=VERTEX_POINT('',#2467);+#2467=CARTESIAN_POINT('',(-6.11,7.382385590716,0.165270364467));+#2468=LINE('',#2460,#2393);+#2469=ORIENTED_EDGE('',*,*,#2470,.T.);+#2470=EDGE_CURVE('',#2466,#2471,#2473,.T.);+#2471=VERTEX_POINT('',#2472);+#2472=CARTESIAN_POINT('',(-6.11,7.579347141319,1.387778780781E-16));+#2473=CIRCLE('',#2474,0.2);+#2474=AXIS2_PLACEMENT_3D('',#2475,#452,#2402);+#2475=CARTESIAN_POINT('',(-6.11,7.579347141319,0.2));+#2476=ORIENTED_EDGE('',*,*,#2477,.T.);+#2477=EDGE_CURVE('',#2471,#2478,#2480,.T.);+#2478=VERTEX_POINT('',#2479);+#2479=CARTESIAN_POINT('',(-6.11,8.,1.387778780781E-16));+#2480=LINE('',#2472,#2377);+#2481=ORIENTED_EDGE('',*,*,#2482,.T.);+#2482=EDGE_CURVE('',#2478,#2483,#2485,.T.);+#2483=VERTEX_POINT('',#2484);+#2484=CARTESIAN_POINT('',(-6.11,8.,0.1));+#2485=LINE('',#2479,#2043);+#2486=ORIENTED_EDGE('',*,*,#2487,.T.);+#2487=EDGE_CURVE('',#2483,#2488,#2490,.T.);+#2488=VERTEX_POINT('',#2489);+#2489=CARTESIAN_POINT('',(-6.11,7.579347141319,0.1));+#2490=LINE('',#2484,#407);+#2491=ORIENTED_EDGE('',*,*,#2492,.T.);+#2492=EDGE_CURVE('',#2488,#2493,#2495,.T.);+#2493=VERTEX_POINT('',#2494);+#2494=CARTESIAN_POINT('',(-6.11,7.480866366018,0.182635182233));+#2495=CIRCLE('',#2496,1.E-01);+#2496=AXIS2_PLACEMENT_3D('',#2475,#2424,#2425);+#2497=ORIENTED_EDGE('',*,*,#2498,.T.);+#2498=EDGE_CURVE('',#2493,#2499,#2501,.T.);+#2499=VERTEX_POINT('',#2500);+#2500=CARTESIAN_POINT('',(-6.11,7.396961550602,0.684729635533));+#2501=LINE('',#2494,#2431);+#2502=ORIENTED_EDGE('',*,*,#2503,.T.);+#2503=EDGE_CURVE('',#2499,#448,#2504,.T.);+#2504=CIRCLE('',#2505,0.2);+#2505=AXIS2_PLACEMENT_3D('',#2463,#14,#2437);+#2506=PLANE('',#2507);+#2507=AXIS2_PLACEMENT_3D('',#2508,#452,#13);+#2508=CARTESIAN_POINT('',(-6.11,7.414276639233,0.410238158856));+#2509=ADVANCED_FACE('',(#2510),#2517,.T.);+#2510=FACE_BOUND('',#2511,.F.);+#2511=EDGE_LOOP('',(#2512,#2502,#2515,#2516));+#2512=ORIENTED_EDGE('',*,*,#2513,.T.);+#2513=EDGE_CURVE('',#2428,#2499,#2514,.T.);+#2514=LINE('',#2429,#451);+#2515=ORIENTED_EDGE('',*,*,#447,.F.);+#2516=ORIENTED_EDGE('',*,*,#2434,.F.);+#2517=CYLINDRICAL_SURFACE('',#2518,0.2);+#2518=AXIS2_PLACEMENT_3D('',#2385,#2386,#2437);+#2519=ADVANCED_FACE('',(#2520),#2365,.F.);+#2520=FACE_BOUND('',#2521,.F.);+#2521=EDGE_LOOP('',(#2445,#2522,#2526,#2530));+#2522=ORIENTED_EDGE('',*,*,#2523,.T.);+#2523=EDGE_CURVE('',#2447,#2524,#2359,.T.);+#2524=VERTEX_POINT('',#2525);+#2525=CARTESIAN_POINT('',(-5.89,7.,0.75));+#2526=ORIENTED_EDGE('',*,*,#2527,.T.);+#2527=EDGE_CURVE('',#2524,#471,#2528,.T.);+#2528=LINE('',#2529,#2043);+#2529=CARTESIAN_POINT('',(-5.89,7.,0.630119079428));+#2530=ORIENTED_EDGE('',*,*,#470,.F.);+#2531=ADVANCED_FACE('',(#2532),#2591,.F.);+#2532=FACE_BOUND('',#2533,.F.);+#2533=EDGE_LOOP('',(#2534,#2535,#2541,#2548,#2553,#2560,#2565,#2570,#2575,#2581,#2586,#2590));+#2534=ORIENTED_EDGE('',*,*,#2527,.F.);+#2535=ORIENTED_EDGE('',*,*,#2536,.T.);+#2536=EDGE_CURVE('',#2524,#2537,#2539,.T.);+#2537=VERTEX_POINT('',#2538);+#2538=CARTESIAN_POINT('',(-5.89,7.2,0.75));+#2539=LINE('',#2540,#2377);+#2540=CARTESIAN_POINT('',(-5.89,6.85,0.75));+#2541=ORIENTED_EDGE('',*,*,#2542,.T.);+#2542=EDGE_CURVE('',#2537,#2543,#2545,.T.);+#2543=VERTEX_POINT('',#2544);+#2544=CARTESIAN_POINT('',(-5.89,7.298480775301,0.667364817767));+#2545=CIRCLE('',#2546,0.1);+#2546=AXIS2_PLACEMENT_3D('',#2547,#2386,#2387);+#2547=CARTESIAN_POINT('',(-5.89,7.2,0.65));+#2548=ORIENTED_EDGE('',*,*,#2549,.T.);+#2549=EDGE_CURVE('',#2543,#2550,#2552,.T.);+#2550=VERTEX_POINT('',#2551);+#2551=CARTESIAN_POINT('',(-5.89,7.382385590716,0.165270364467));+#2552=LINE('',#2544,#2393);+#2553=ORIENTED_EDGE('',*,*,#2554,.T.);+#2554=EDGE_CURVE('',#2550,#2555,#2557,.T.);+#2555=VERTEX_POINT('',#2556);+#2556=CARTESIAN_POINT('',(-5.89,7.579347141319,1.387778780781E-16));+#2557=CIRCLE('',#2558,0.2);+#2558=AXIS2_PLACEMENT_3D('',#2559,#452,#2402);+#2559=CARTESIAN_POINT('',(-5.89,7.579347141319,0.2));+#2560=ORIENTED_EDGE('',*,*,#2561,.T.);+#2561=EDGE_CURVE('',#2555,#2562,#2564,.T.);+#2562=VERTEX_POINT('',#2563);+#2563=CARTESIAN_POINT('',(-5.89,8.,1.387778780781E-16));+#2564=LINE('',#2556,#2377);+#2565=ORIENTED_EDGE('',*,*,#2566,.T.);+#2566=EDGE_CURVE('',#2562,#2567,#2569,.T.);+#2567=VERTEX_POINT('',#2568);+#2568=CARTESIAN_POINT('',(-5.89,8.,0.1));+#2569=LINE('',#2563,#2043);+#2570=ORIENTED_EDGE('',*,*,#2571,.T.);+#2571=EDGE_CURVE('',#2567,#2572,#2574,.T.);+#2572=VERTEX_POINT('',#2573);+#2573=CARTESIAN_POINT('',(-5.89,7.579347141319,0.1));+#2574=LINE('',#2568,#407);+#2575=ORIENTED_EDGE('',*,*,#2576,.T.);+#2576=EDGE_CURVE('',#2572,#2577,#2579,.T.);+#2577=VERTEX_POINT('',#2578);+#2578=CARTESIAN_POINT('',(-5.89,7.480866366018,0.182635182233));+#2579=CIRCLE('',#2580,1.E-01);+#2580=AXIS2_PLACEMENT_3D('',#2559,#2424,#2425);+#2581=ORIENTED_EDGE('',*,*,#2582,.T.);+#2582=EDGE_CURVE('',#2577,#2583,#2585,.T.);+#2583=VERTEX_POINT('',#2584);+#2584=CARTESIAN_POINT('',(-5.89,7.396961550602,0.684729635533));+#2585=LINE('',#2578,#2431);+#2586=ORIENTED_EDGE('',*,*,#2587,.T.);+#2587=EDGE_CURVE('',#2583,#483,#2588,.T.);+#2588=CIRCLE('',#2589,0.2);+#2589=AXIS2_PLACEMENT_3D('',#2547,#14,#2437);+#2590=ORIENTED_EDGE('',*,*,#482,.T.);+#2591=PLANE('',#2592);+#2592=AXIS2_PLACEMENT_3D('',#2593,#452,#13);+#2593=CARTESIAN_POINT('',(-5.89,7.414276639233,0.410238158856));+#2594=ADVANCED_FACE('',(#2595),#2658,.T.);+#2595=FACE_BOUND('',#2596,.T.);+#2596=EDGE_LOOP('',(#2597,#2603,#2609,#2616,#2621,#2628,#2633,#2638,#2643,#2649,#2654,#489));+#2597=ORIENTED_EDGE('',*,*,#2598,.F.);+#2598=EDGE_CURVE('',#2599,#491,#2601,.T.);+#2599=VERTEX_POINT('',#2600);+#2600=CARTESIAN_POINT('',(-5.71,7.,0.75));+#2601=LINE('',#2602,#2043);+#2602=CARTESIAN_POINT('',(-5.71,7.,0.630119079428));+#2603=ORIENTED_EDGE('',*,*,#2604,.T.);+#2604=EDGE_CURVE('',#2599,#2605,#2607,.T.);+#2605=VERTEX_POINT('',#2606);+#2606=CARTESIAN_POINT('',(-5.71,7.2,0.75));+#2607=LINE('',#2608,#2377);+#2608=CARTESIAN_POINT('',(-5.71,6.85,0.75));+#2609=ORIENTED_EDGE('',*,*,#2610,.T.);+#2610=EDGE_CURVE('',#2605,#2611,#2613,.T.);+#2611=VERTEX_POINT('',#2612);+#2612=CARTESIAN_POINT('',(-5.71,7.298480775301,0.667364817767));+#2613=CIRCLE('',#2614,0.1);+#2614=AXIS2_PLACEMENT_3D('',#2615,#2386,#2387);+#2615=CARTESIAN_POINT('',(-5.71,7.2,0.65));+#2616=ORIENTED_EDGE('',*,*,#2617,.T.);+#2617=EDGE_CURVE('',#2611,#2618,#2620,.T.);+#2618=VERTEX_POINT('',#2619);+#2619=CARTESIAN_POINT('',(-5.71,7.382385590716,0.165270364467));+#2620=LINE('',#2612,#2393);+#2621=ORIENTED_EDGE('',*,*,#2622,.T.);+#2622=EDGE_CURVE('',#2618,#2623,#2625,.T.);+#2623=VERTEX_POINT('',#2624);+#2624=CARTESIAN_POINT('',(-5.71,7.579347141319,1.387778780781E-16));+#2625=CIRCLE('',#2626,0.2);+#2626=AXIS2_PLACEMENT_3D('',#2627,#452,#2402);+#2627=CARTESIAN_POINT('',(-5.71,7.579347141319,0.2));+#2628=ORIENTED_EDGE('',*,*,#2629,.T.);+#2629=EDGE_CURVE('',#2623,#2630,#2632,.T.);+#2630=VERTEX_POINT('',#2631);+#2631=CARTESIAN_POINT('',(-5.71,8.,1.387778780781E-16));+#2632=LINE('',#2624,#2377);+#2633=ORIENTED_EDGE('',*,*,#2634,.T.);+#2634=EDGE_CURVE('',#2630,#2635,#2637,.T.);+#2635=VERTEX_POINT('',#2636);+#2636=CARTESIAN_POINT('',(-5.71,8.,0.1));+#2637=LINE('',#2631,#2043);+#2638=ORIENTED_EDGE('',*,*,#2639,.T.);+#2639=EDGE_CURVE('',#2635,#2640,#2642,.T.);+#2640=VERTEX_POINT('',#2641);+#2641=CARTESIAN_POINT('',(-5.71,7.579347141319,0.1));+#2642=LINE('',#2636,#407);+#2643=ORIENTED_EDGE('',*,*,#2644,.T.);+#2644=EDGE_CURVE('',#2640,#2645,#2647,.T.);+#2645=VERTEX_POINT('',#2646);+#2646=CARTESIAN_POINT('',(-5.71,7.480866366018,0.182635182233));+#2647=CIRCLE('',#2648,1.E-01);+#2648=AXIS2_PLACEMENT_3D('',#2627,#2424,#2425);+#2649=ORIENTED_EDGE('',*,*,#2650,.T.);+#2650=EDGE_CURVE('',#2645,#2651,#2653,.T.);+#2651=VERTEX_POINT('',#2652);+#2652=CARTESIAN_POINT('',(-5.71,7.396961550602,0.684729635533));+#2653=LINE('',#2646,#2431);+#2654=ORIENTED_EDGE('',*,*,#2655,.T.);+#2655=EDGE_CURVE('',#2651,#486,#2656,.T.);+#2656=CIRCLE('',#2657,0.2);+#2657=AXIS2_PLACEMENT_3D('',#2615,#14,#2437);+#2658=PLANE('',#2659);+#2659=AXIS2_PLACEMENT_3D('',#2660,#452,#13);+#2660=CARTESIAN_POINT('',(-5.71,7.414276639233,0.410238158856));+#2661=ADVANCED_FACE('',(#2662),#2669,.T.);+#2662=FACE_BOUND('',#2663,.F.);+#2663=EDGE_LOOP('',(#2664,#2654,#2667,#2668));+#2664=ORIENTED_EDGE('',*,*,#2665,.T.);+#2665=EDGE_CURVE('',#2583,#2651,#2666,.T.);+#2666=LINE('',#2584,#451);+#2667=ORIENTED_EDGE('',*,*,#485,.F.);+#2668=ORIENTED_EDGE('',*,*,#2587,.F.);+#2669=CYLINDRICAL_SURFACE('',#2670,0.2);+#2670=AXIS2_PLACEMENT_3D('',#2547,#2386,#2437);+#2671=ADVANCED_FACE('',(#2672),#2365,.F.);+#2672=FACE_BOUND('',#2673,.F.);+#2673=EDGE_LOOP('',(#2597,#2674,#2678,#2682));+#2674=ORIENTED_EDGE('',*,*,#2675,.T.);+#2675=EDGE_CURVE('',#2599,#2676,#2359,.T.);+#2676=VERTEX_POINT('',#2677);+#2677=CARTESIAN_POINT('',(-5.49,7.,0.75));+#2678=ORIENTED_EDGE('',*,*,#2679,.T.);+#2679=EDGE_CURVE('',#2676,#506,#2680,.T.);+#2680=LINE('',#2681,#2043);+#2681=CARTESIAN_POINT('',(-5.49,7.,0.630119079428));+#2682=ORIENTED_EDGE('',*,*,#505,.F.);+#2683=ADVANCED_FACE('',(#2684),#2743,.F.);+#2684=FACE_BOUND('',#2685,.F.);+#2685=EDGE_LOOP('',(#2686,#2687,#2693,#2700,#2705,#2712,#2717,#2722,#2727,#2733,#2738,#2742));+#2686=ORIENTED_EDGE('',*,*,#2679,.F.);+#2687=ORIENTED_EDGE('',*,*,#2688,.T.);+#2688=EDGE_CURVE('',#2676,#2689,#2691,.T.);+#2689=VERTEX_POINT('',#2690);+#2690=CARTESIAN_POINT('',(-5.49,7.2,0.75));+#2691=LINE('',#2692,#2377);+#2692=CARTESIAN_POINT('',(-5.49,6.85,0.75));+#2693=ORIENTED_EDGE('',*,*,#2694,.T.);+#2694=EDGE_CURVE('',#2689,#2695,#2697,.T.);+#2695=VERTEX_POINT('',#2696);+#2696=CARTESIAN_POINT('',(-5.49,7.298480775301,0.667364817767));+#2697=CIRCLE('',#2698,0.1);+#2698=AXIS2_PLACEMENT_3D('',#2699,#2386,#2387);+#2699=CARTESIAN_POINT('',(-5.49,7.2,0.65));+#2700=ORIENTED_EDGE('',*,*,#2701,.T.);+#2701=EDGE_CURVE('',#2695,#2702,#2704,.T.);+#2702=VERTEX_POINT('',#2703);+#2703=CARTESIAN_POINT('',(-5.49,7.382385590716,0.165270364467));+#2704=LINE('',#2696,#2393);+#2705=ORIENTED_EDGE('',*,*,#2706,.T.);+#2706=EDGE_CURVE('',#2702,#2707,#2709,.T.);+#2707=VERTEX_POINT('',#2708);+#2708=CARTESIAN_POINT('',(-5.49,7.579347141319,1.387778780781E-16));+#2709=CIRCLE('',#2710,0.2);+#2710=AXIS2_PLACEMENT_3D('',#2711,#452,#2402);+#2711=CARTESIAN_POINT('',(-5.49,7.579347141319,0.2));+#2712=ORIENTED_EDGE('',*,*,#2713,.T.);+#2713=EDGE_CURVE('',#2707,#2714,#2716,.T.);+#2714=VERTEX_POINT('',#2715);+#2715=CARTESIAN_POINT('',(-5.49,8.,1.387778780781E-16));+#2716=LINE('',#2708,#2377);+#2717=ORIENTED_EDGE('',*,*,#2718,.T.);+#2718=EDGE_CURVE('',#2714,#2719,#2721,.T.);+#2719=VERTEX_POINT('',#2720);+#2720=CARTESIAN_POINT('',(-5.49,8.,0.1));+#2721=LINE('',#2715,#2043);+#2722=ORIENTED_EDGE('',*,*,#2723,.T.);+#2723=EDGE_CURVE('',#2719,#2724,#2726,.T.);+#2724=VERTEX_POINT('',#2725);+#2725=CARTESIAN_POINT('',(-5.49,7.579347141319,0.1));+#2726=LINE('',#2720,#407);+#2727=ORIENTED_EDGE('',*,*,#2728,.T.);+#2728=EDGE_CURVE('',#2724,#2729,#2731,.T.);+#2729=VERTEX_POINT('',#2730);+#2730=CARTESIAN_POINT('',(-5.49,7.480866366018,0.182635182233));+#2731=CIRCLE('',#2732,1.E-01);+#2732=AXIS2_PLACEMENT_3D('',#2711,#2424,#2425);+#2733=ORIENTED_EDGE('',*,*,#2734,.T.);+#2734=EDGE_CURVE('',#2729,#2735,#2737,.T.);+#2735=VERTEX_POINT('',#2736);+#2736=CARTESIAN_POINT('',(-5.49,7.396961550602,0.684729635533));+#2737=LINE('',#2730,#2431);+#2738=ORIENTED_EDGE('',*,*,#2739,.T.);+#2739=EDGE_CURVE('',#2735,#518,#2740,.T.);+#2740=CIRCLE('',#2741,0.2);+#2741=AXIS2_PLACEMENT_3D('',#2699,#14,#2437);+#2742=ORIENTED_EDGE('',*,*,#517,.T.);+#2743=PLANE('',#2744);+#2744=AXIS2_PLACEMENT_3D('',#2745,#452,#13);+#2745=CARTESIAN_POINT('',(-5.49,7.414276639233,0.410238158856));+#2746=ADVANCED_FACE('',(#2747),#2810,.T.);+#2747=FACE_BOUND('',#2748,.T.);+#2748=EDGE_LOOP('',(#2749,#2755,#2761,#2768,#2773,#2780,#2785,#2790,#2795,#2801,#2806,#524));+#2749=ORIENTED_EDGE('',*,*,#2750,.F.);+#2750=EDGE_CURVE('',#2751,#526,#2753,.T.);+#2751=VERTEX_POINT('',#2752);+#2752=CARTESIAN_POINT('',(-5.31,7.,0.75));+#2753=LINE('',#2754,#2043);+#2754=CARTESIAN_POINT('',(-5.31,7.,0.630119079428));+#2755=ORIENTED_EDGE('',*,*,#2756,.T.);+#2756=EDGE_CURVE('',#2751,#2757,#2759,.T.);+#2757=VERTEX_POINT('',#2758);+#2758=CARTESIAN_POINT('',(-5.31,7.2,0.75));+#2759=LINE('',#2760,#2377);+#2760=CARTESIAN_POINT('',(-5.31,6.85,0.75));+#2761=ORIENTED_EDGE('',*,*,#2762,.T.);+#2762=EDGE_CURVE('',#2757,#2763,#2765,.T.);+#2763=VERTEX_POINT('',#2764);+#2764=CARTESIAN_POINT('',(-5.31,7.298480775301,0.667364817767));+#2765=CIRCLE('',#2766,0.1);+#2766=AXIS2_PLACEMENT_3D('',#2767,#2386,#2387);+#2767=CARTESIAN_POINT('',(-5.31,7.2,0.65));+#2768=ORIENTED_EDGE('',*,*,#2769,.T.);+#2769=EDGE_CURVE('',#2763,#2770,#2772,.T.);+#2770=VERTEX_POINT('',#2771);+#2771=CARTESIAN_POINT('',(-5.31,7.382385590716,0.165270364467));+#2772=LINE('',#2764,#2393);+#2773=ORIENTED_EDGE('',*,*,#2774,.T.);+#2774=EDGE_CURVE('',#2770,#2775,#2777,.T.);+#2775=VERTEX_POINT('',#2776);+#2776=CARTESIAN_POINT('',(-5.31,7.579347141319,1.387778780781E-16));+#2777=CIRCLE('',#2778,0.2);+#2778=AXIS2_PLACEMENT_3D('',#2779,#452,#2402);+#2779=CARTESIAN_POINT('',(-5.31,7.579347141319,0.2));+#2780=ORIENTED_EDGE('',*,*,#2781,.T.);+#2781=EDGE_CURVE('',#2775,#2782,#2784,.T.);+#2782=VERTEX_POINT('',#2783);+#2783=CARTESIAN_POINT('',(-5.31,8.,1.387778780781E-16));+#2784=LINE('',#2776,#2377);+#2785=ORIENTED_EDGE('',*,*,#2786,.T.);+#2786=EDGE_CURVE('',#2782,#2787,#2789,.T.);+#2787=VERTEX_POINT('',#2788);+#2788=CARTESIAN_POINT('',(-5.31,8.,0.1));+#2789=LINE('',#2783,#2043);+#2790=ORIENTED_EDGE('',*,*,#2791,.T.);+#2791=EDGE_CURVE('',#2787,#2792,#2794,.T.);+#2792=VERTEX_POINT('',#2793);+#2793=CARTESIAN_POINT('',(-5.31,7.579347141319,0.1));+#2794=LINE('',#2788,#407);+#2795=ORIENTED_EDGE('',*,*,#2796,.T.);+#2796=EDGE_CURVE('',#2792,#2797,#2799,.T.);+#2797=VERTEX_POINT('',#2798);+#2798=CARTESIAN_POINT('',(-5.31,7.480866366018,0.182635182233));+#2799=CIRCLE('',#2800,1.E-01);+#2800=AXIS2_PLACEMENT_3D('',#2779,#2424,#2425);+#2801=ORIENTED_EDGE('',*,*,#2802,.T.);+#2802=EDGE_CURVE('',#2797,#2803,#2805,.T.);+#2803=VERTEX_POINT('',#2804);+#2804=CARTESIAN_POINT('',(-5.31,7.396961550602,0.684729635533));+#2805=LINE('',#2798,#2431);+#2806=ORIENTED_EDGE('',*,*,#2807,.T.);+#2807=EDGE_CURVE('',#2803,#521,#2808,.T.);+#2808=CIRCLE('',#2809,0.2);+#2809=AXIS2_PLACEMENT_3D('',#2767,#14,#2437);+#2810=PLANE('',#2811);+#2811=AXIS2_PLACEMENT_3D('',#2812,#452,#13);+#2812=CARTESIAN_POINT('',(-5.31,7.414276639233,0.410238158856));+#2813=ADVANCED_FACE('',(#2814),#2821,.T.);+#2814=FACE_BOUND('',#2815,.F.);+#2815=EDGE_LOOP('',(#2816,#2806,#2819,#2820));+#2816=ORIENTED_EDGE('',*,*,#2817,.T.);+#2817=EDGE_CURVE('',#2735,#2803,#2818,.T.);+#2818=LINE('',#2736,#451);+#2819=ORIENTED_EDGE('',*,*,#520,.F.);+#2820=ORIENTED_EDGE('',*,*,#2739,.F.);+#2821=CYLINDRICAL_SURFACE('',#2822,0.2);+#2822=AXIS2_PLACEMENT_3D('',#2699,#2386,#2437);+#2823=ADVANCED_FACE('',(#2824),#2365,.F.);+#2824=FACE_BOUND('',#2825,.F.);+#2825=EDGE_LOOP('',(#2749,#2826,#2830,#2834));+#2826=ORIENTED_EDGE('',*,*,#2827,.T.);+#2827=EDGE_CURVE('',#2751,#2828,#2359,.T.);+#2828=VERTEX_POINT('',#2829);+#2829=CARTESIAN_POINT('',(-5.09,7.,0.75));+#2830=ORIENTED_EDGE('',*,*,#2831,.T.);+#2831=EDGE_CURVE('',#2828,#541,#2832,.T.);+#2832=LINE('',#2833,#2043);+#2833=CARTESIAN_POINT('',(-5.09,7.,0.630119079428));+#2834=ORIENTED_EDGE('',*,*,#540,.F.);+#2835=ADVANCED_FACE('',(#2836),#2895,.F.);+#2836=FACE_BOUND('',#2837,.F.);+#2837=EDGE_LOOP('',(#2838,#2839,#2845,#2852,#2857,#2864,#2869,#2874,#2879,#2885,#2890,#2894));+#2838=ORIENTED_EDGE('',*,*,#2831,.F.);+#2839=ORIENTED_EDGE('',*,*,#2840,.T.);+#2840=EDGE_CURVE('',#2828,#2841,#2843,.T.);+#2841=VERTEX_POINT('',#2842);+#2842=CARTESIAN_POINT('',(-5.09,7.2,0.75));+#2843=LINE('',#2844,#2377);+#2844=CARTESIAN_POINT('',(-5.09,6.85,0.75));+#2845=ORIENTED_EDGE('',*,*,#2846,.T.);+#2846=EDGE_CURVE('',#2841,#2847,#2849,.T.);+#2847=VERTEX_POINT('',#2848);+#2848=CARTESIAN_POINT('',(-5.09,7.298480775301,0.667364817767));+#2849=CIRCLE('',#2850,0.1);+#2850=AXIS2_PLACEMENT_3D('',#2851,#2386,#2387);+#2851=CARTESIAN_POINT('',(-5.09,7.2,0.65));+#2852=ORIENTED_EDGE('',*,*,#2853,.T.);+#2853=EDGE_CURVE('',#2847,#2854,#2856,.T.);+#2854=VERTEX_POINT('',#2855);+#2855=CARTESIAN_POINT('',(-5.09,7.382385590716,0.165270364467));+#2856=LINE('',#2848,#2393);+#2857=ORIENTED_EDGE('',*,*,#2858,.T.);+#2858=EDGE_CURVE('',#2854,#2859,#2861,.T.);+#2859=VERTEX_POINT('',#2860);+#2860=CARTESIAN_POINT('',(-5.09,7.579347141319,1.387778780781E-16));+#2861=CIRCLE('',#2862,0.2);+#2862=AXIS2_PLACEMENT_3D('',#2863,#452,#2402);+#2863=CARTESIAN_POINT('',(-5.09,7.579347141319,0.2));+#2864=ORIENTED_EDGE('',*,*,#2865,.T.);+#2865=EDGE_CURVE('',#2859,#2866,#2868,.T.);+#2866=VERTEX_POINT('',#2867);+#2867=CARTESIAN_POINT('',(-5.09,8.,1.387778780781E-16));+#2868=LINE('',#2860,#2377);+#2869=ORIENTED_EDGE('',*,*,#2870,.T.);+#2870=EDGE_CURVE('',#2866,#2871,#2873,.T.);+#2871=VERTEX_POINT('',#2872);+#2872=CARTESIAN_POINT('',(-5.09,8.,0.1));+#2873=LINE('',#2867,#2043);+#2874=ORIENTED_EDGE('',*,*,#2875,.T.);+#2875=EDGE_CURVE('',#2871,#2876,#2878,.T.);+#2876=VERTEX_POINT('',#2877);+#2877=CARTESIAN_POINT('',(-5.09,7.579347141319,0.1));+#2878=LINE('',#2872,#407);+#2879=ORIENTED_EDGE('',*,*,#2880,.T.);+#2880=EDGE_CURVE('',#2876,#2881,#2883,.T.);+#2881=VERTEX_POINT('',#2882);+#2882=CARTESIAN_POINT('',(-5.09,7.480866366018,0.182635182233));+#2883=CIRCLE('',#2884,1.E-01);+#2884=AXIS2_PLACEMENT_3D('',#2863,#2424,#2425);+#2885=ORIENTED_EDGE('',*,*,#2886,.T.);+#2886=EDGE_CURVE('',#2881,#2887,#2889,.T.);+#2887=VERTEX_POINT('',#2888);+#2888=CARTESIAN_POINT('',(-5.09,7.396961550602,0.684729635533));+#2889=LINE('',#2882,#2431);+#2890=ORIENTED_EDGE('',*,*,#2891,.T.);+#2891=EDGE_CURVE('',#2887,#553,#2892,.T.);+#2892=CIRCLE('',#2893,0.2);+#2893=AXIS2_PLACEMENT_3D('',#2851,#14,#2437);+#2894=ORIENTED_EDGE('',*,*,#552,.T.);+#2895=PLANE('',#2896);+#2896=AXIS2_PLACEMENT_3D('',#2897,#452,#13);+#2897=CARTESIAN_POINT('',(-5.09,7.414276639233,0.410238158856));+#2898=ADVANCED_FACE('',(#2899),#2962,.T.);+#2899=FACE_BOUND('',#2900,.T.);+#2900=EDGE_LOOP('',(#2901,#2907,#2913,#2920,#2925,#2932,#2937,#2942,#2947,#2953,#2958,#559));+#2901=ORIENTED_EDGE('',*,*,#2902,.F.);+#2902=EDGE_CURVE('',#2903,#561,#2905,.T.);+#2903=VERTEX_POINT('',#2904);+#2904=CARTESIAN_POINT('',(-4.91,7.,0.75));+#2905=LINE('',#2906,#2043);+#2906=CARTESIAN_POINT('',(-4.91,7.,0.630119079428));+#2907=ORIENTED_EDGE('',*,*,#2908,.T.);+#2908=EDGE_CURVE('',#2903,#2909,#2911,.T.);+#2909=VERTEX_POINT('',#2910);+#2910=CARTESIAN_POINT('',(-4.91,7.2,0.75));+#2911=LINE('',#2912,#2377);+#2912=CARTESIAN_POINT('',(-4.91,6.85,0.75));+#2913=ORIENTED_EDGE('',*,*,#2914,.T.);+#2914=EDGE_CURVE('',#2909,#2915,#2917,.T.);+#2915=VERTEX_POINT('',#2916);+#2916=CARTESIAN_POINT('',(-4.91,7.298480775301,0.667364817767));+#2917=CIRCLE('',#2918,0.1);+#2918=AXIS2_PLACEMENT_3D('',#2919,#2386,#2387);+#2919=CARTESIAN_POINT('',(-4.91,7.2,0.65));+#2920=ORIENTED_EDGE('',*,*,#2921,.T.);+#2921=EDGE_CURVE('',#2915,#2922,#2924,.T.);+#2922=VERTEX_POINT('',#2923);+#2923=CARTESIAN_POINT('',(-4.91,7.382385590716,0.165270364467));+#2924=LINE('',#2916,#2393);+#2925=ORIENTED_EDGE('',*,*,#2926,.T.);+#2926=EDGE_CURVE('',#2922,#2927,#2929,.T.);+#2927=VERTEX_POINT('',#2928);+#2928=CARTESIAN_POINT('',(-4.91,7.579347141319,1.387778780781E-16));+#2929=CIRCLE('',#2930,0.2);+#2930=AXIS2_PLACEMENT_3D('',#2931,#452,#2402);+#2931=CARTESIAN_POINT('',(-4.91,7.579347141319,0.2));+#2932=ORIENTED_EDGE('',*,*,#2933,.T.);+#2933=EDGE_CURVE('',#2927,#2934,#2936,.T.);+#2934=VERTEX_POINT('',#2935);+#2935=CARTESIAN_POINT('',(-4.91,8.,1.387778780781E-16));+#2936=LINE('',#2928,#2377);+#2937=ORIENTED_EDGE('',*,*,#2938,.T.);+#2938=EDGE_CURVE('',#2934,#2939,#2941,.T.);+#2939=VERTEX_POINT('',#2940);+#2940=CARTESIAN_POINT('',(-4.91,8.,0.1));+#2941=LINE('',#2935,#2043);+#2942=ORIENTED_EDGE('',*,*,#2943,.T.);+#2943=EDGE_CURVE('',#2939,#2944,#2946,.T.);+#2944=VERTEX_POINT('',#2945);+#2945=CARTESIAN_POINT('',(-4.91,7.579347141319,0.1));+#2946=LINE('',#2940,#407);+#2947=ORIENTED_EDGE('',*,*,#2948,.T.);+#2948=EDGE_CURVE('',#2944,#2949,#2951,.T.);+#2949=VERTEX_POINT('',#2950);+#2950=CARTESIAN_POINT('',(-4.91,7.480866366018,0.182635182233));+#2951=CIRCLE('',#2952,1.E-01);+#2952=AXIS2_PLACEMENT_3D('',#2931,#2424,#2425);+#2953=ORIENTED_EDGE('',*,*,#2954,.T.);+#2954=EDGE_CURVE('',#2949,#2955,#2957,.T.);+#2955=VERTEX_POINT('',#2956);+#2956=CARTESIAN_POINT('',(-4.91,7.396961550602,0.684729635533));+#2957=LINE('',#2950,#2431);+#2958=ORIENTED_EDGE('',*,*,#2959,.T.);+#2959=EDGE_CURVE('',#2955,#556,#2960,.T.);+#2960=CIRCLE('',#2961,0.2);+#2961=AXIS2_PLACEMENT_3D('',#2919,#14,#2437);+#2962=PLANE('',#2963);+#2963=AXIS2_PLACEMENT_3D('',#2964,#452,#13);+#2964=CARTESIAN_POINT('',(-4.91,7.414276639233,0.410238158856));+#2965=ADVANCED_FACE('',(#2966),#2973,.T.);+#2966=FACE_BOUND('',#2967,.F.);+#2967=EDGE_LOOP('',(#2968,#2958,#2971,#2972));+#2968=ORIENTED_EDGE('',*,*,#2969,.T.);+#2969=EDGE_CURVE('',#2887,#2955,#2970,.T.);+#2970=LINE('',#2888,#451);+#2971=ORIENTED_EDGE('',*,*,#555,.F.);+#2972=ORIENTED_EDGE('',*,*,#2891,.F.);+#2973=CYLINDRICAL_SURFACE('',#2974,0.2);+#2974=AXIS2_PLACEMENT_3D('',#2851,#2386,#2437);+#2975=ADVANCED_FACE('',(#2976),#2365,.F.);+#2976=FACE_BOUND('',#2977,.F.);+#2977=EDGE_LOOP('',(#2901,#2978,#2982,#2986));+#2978=ORIENTED_EDGE('',*,*,#2979,.T.);+#2979=EDGE_CURVE('',#2903,#2980,#2359,.T.);+#2980=VERTEX_POINT('',#2981);+#2981=CARTESIAN_POINT('',(-4.69,7.,0.75));+#2982=ORIENTED_EDGE('',*,*,#2983,.T.);+#2983=EDGE_CURVE('',#2980,#576,#2984,.T.);+#2984=LINE('',#2985,#2043);+#2985=CARTESIAN_POINT('',(-4.69,7.,0.630119079428));+#2986=ORIENTED_EDGE('',*,*,#575,.F.);+#2987=ADVANCED_FACE('',(#2988),#3047,.F.);+#2988=FACE_BOUND('',#2989,.F.);+#2989=EDGE_LOOP('',(#2990,#2991,#2997,#3004,#3009,#3016,#3021,#3026,#3031,#3037,#3042,#3046));+#2990=ORIENTED_EDGE('',*,*,#2983,.F.);+#2991=ORIENTED_EDGE('',*,*,#2992,.T.);+#2992=EDGE_CURVE('',#2980,#2993,#2995,.T.);+#2993=VERTEX_POINT('',#2994);+#2994=CARTESIAN_POINT('',(-4.69,7.2,0.75));+#2995=LINE('',#2996,#2377);+#2996=CARTESIAN_POINT('',(-4.69,6.85,0.75));+#2997=ORIENTED_EDGE('',*,*,#2998,.T.);+#2998=EDGE_CURVE('',#2993,#2999,#3001,.T.);+#2999=VERTEX_POINT('',#3000);+#3000=CARTESIAN_POINT('',(-4.69,7.298480775301,0.667364817767));+#3001=CIRCLE('',#3002,0.1);+#3002=AXIS2_PLACEMENT_3D('',#3003,#2386,#2387);+#3003=CARTESIAN_POINT('',(-4.69,7.2,0.65));+#3004=ORIENTED_EDGE('',*,*,#3005,.T.);+#3005=EDGE_CURVE('',#2999,#3006,#3008,.T.);+#3006=VERTEX_POINT('',#3007);+#3007=CARTESIAN_POINT('',(-4.69,7.382385590716,0.165270364467));+#3008=LINE('',#3000,#2393);+#3009=ORIENTED_EDGE('',*,*,#3010,.T.);+#3010=EDGE_CURVE('',#3006,#3011,#3013,.T.);+#3011=VERTEX_POINT('',#3012);+#3012=CARTESIAN_POINT('',(-4.69,7.579347141319,1.387778780781E-16));+#3013=CIRCLE('',#3014,0.2);+#3014=AXIS2_PLACEMENT_3D('',#3015,#452,#2402);+#3015=CARTESIAN_POINT('',(-4.69,7.579347141319,0.2));+#3016=ORIENTED_EDGE('',*,*,#3017,.T.);+#3017=EDGE_CURVE('',#3011,#3018,#3020,.T.);+#3018=VERTEX_POINT('',#3019);+#3019=CARTESIAN_POINT('',(-4.69,8.,1.387778780781E-16));+#3020=LINE('',#3012,#2377);+#3021=ORIENTED_EDGE('',*,*,#3022,.T.);+#3022=EDGE_CURVE('',#3018,#3023,#3025,.T.);+#3023=VERTEX_POINT('',#3024);+#3024=CARTESIAN_POINT('',(-4.69,8.,0.1));+#3025=LINE('',#3019,#2043);+#3026=ORIENTED_EDGE('',*,*,#3027,.T.);+#3027=EDGE_CURVE('',#3023,#3028,#3030,.T.);+#3028=VERTEX_POINT('',#3029);+#3029=CARTESIAN_POINT('',(-4.69,7.579347141319,0.1));+#3030=LINE('',#3024,#407);+#3031=ORIENTED_EDGE('',*,*,#3032,.T.);+#3032=EDGE_CURVE('',#3028,#3033,#3035,.T.);+#3033=VERTEX_POINT('',#3034);+#3034=CARTESIAN_POINT('',(-4.69,7.480866366018,0.182635182233));+#3035=CIRCLE('',#3036,1.E-01);+#3036=AXIS2_PLACEMENT_3D('',#3015,#2424,#2425);+#3037=ORIENTED_EDGE('',*,*,#3038,.T.);+#3038=EDGE_CURVE('',#3033,#3039,#3041,.T.);+#3039=VERTEX_POINT('',#3040);+#3040=CARTESIAN_POINT('',(-4.69,7.396961550602,0.684729635533));+#3041=LINE('',#3034,#2431);+#3042=ORIENTED_EDGE('',*,*,#3043,.T.);+#3043=EDGE_CURVE('',#3039,#588,#3044,.T.);+#3044=CIRCLE('',#3045,0.2);+#3045=AXIS2_PLACEMENT_3D('',#3003,#14,#2437);+#3046=ORIENTED_EDGE('',*,*,#587,.T.);+#3047=PLANE('',#3048);+#3048=AXIS2_PLACEMENT_3D('',#3049,#452,#13);+#3049=CARTESIAN_POINT('',(-4.69,7.414276639233,0.410238158856));+#3050=ADVANCED_FACE('',(#3051),#3114,.T.);+#3051=FACE_BOUND('',#3052,.T.);+#3052=EDGE_LOOP('',(#3053,#3059,#3065,#3072,#3077,#3084,#3089,#3094,#3099,#3105,#3110,#594));+#3053=ORIENTED_EDGE('',*,*,#3054,.F.);+#3054=EDGE_CURVE('',#3055,#596,#3057,.T.);+#3055=VERTEX_POINT('',#3056);+#3056=CARTESIAN_POINT('',(-4.51,7.,0.75));+#3057=LINE('',#3058,#2043);+#3058=CARTESIAN_POINT('',(-4.51,7.,0.630119079428));+#3059=ORIENTED_EDGE('',*,*,#3060,.T.);+#3060=EDGE_CURVE('',#3055,#3061,#3063,.T.);+#3061=VERTEX_POINT('',#3062);+#3062=CARTESIAN_POINT('',(-4.51,7.2,0.75));+#3063=LINE('',#3064,#2377);+#3064=CARTESIAN_POINT('',(-4.51,6.85,0.75));+#3065=ORIENTED_EDGE('',*,*,#3066,.T.);+#3066=EDGE_CURVE('',#3061,#3067,#3069,.T.);+#3067=VERTEX_POINT('',#3068);+#3068=CARTESIAN_POINT('',(-4.51,7.298480775301,0.667364817767));+#3069=CIRCLE('',#3070,0.1);+#3070=AXIS2_PLACEMENT_3D('',#3071,#2386,#2387);+#3071=CARTESIAN_POINT('',(-4.51,7.2,0.65));+#3072=ORIENTED_EDGE('',*,*,#3073,.T.);+#3073=EDGE_CURVE('',#3067,#3074,#3076,.T.);+#3074=VERTEX_POINT('',#3075);+#3075=CARTESIAN_POINT('',(-4.51,7.382385590716,0.165270364467));+#3076=LINE('',#3068,#2393);+#3077=ORIENTED_EDGE('',*,*,#3078,.T.);+#3078=EDGE_CURVE('',#3074,#3079,#3081,.T.);+#3079=VERTEX_POINT('',#3080);+#3080=CARTESIAN_POINT('',(-4.51,7.579347141319,1.387778780781E-16));+#3081=CIRCLE('',#3082,0.2);+#3082=AXIS2_PLACEMENT_3D('',#3083,#452,#2402);+#3083=CARTESIAN_POINT('',(-4.51,7.579347141319,0.2));+#3084=ORIENTED_EDGE('',*,*,#3085,.T.);+#3085=EDGE_CURVE('',#3079,#3086,#3088,.T.);+#3086=VERTEX_POINT('',#3087);+#3087=CARTESIAN_POINT('',(-4.51,8.,1.387778780781E-16));+#3088=LINE('',#3080,#2377);+#3089=ORIENTED_EDGE('',*,*,#3090,.T.);+#3090=EDGE_CURVE('',#3086,#3091,#3093,.T.);+#3091=VERTEX_POINT('',#3092);+#3092=CARTESIAN_POINT('',(-4.51,8.,0.1));+#3093=LINE('',#3087,#2043);+#3094=ORIENTED_EDGE('',*,*,#3095,.T.);+#3095=EDGE_CURVE('',#3091,#3096,#3098,.T.);+#3096=VERTEX_POINT('',#3097);+#3097=CARTESIAN_POINT('',(-4.51,7.579347141319,0.1));+#3098=LINE('',#3092,#407);+#3099=ORIENTED_EDGE('',*,*,#3100,.T.);+#3100=EDGE_CURVE('',#3096,#3101,#3103,.T.);+#3101=VERTEX_POINT('',#3102);+#3102=CARTESIAN_POINT('',(-4.51,7.480866366018,0.182635182233));+#3103=CIRCLE('',#3104,1.E-01);+#3104=AXIS2_PLACEMENT_3D('',#3083,#2424,#2425);+#3105=ORIENTED_EDGE('',*,*,#3106,.T.);+#3106=EDGE_CURVE('',#3101,#3107,#3109,.T.);+#3107=VERTEX_POINT('',#3108);+#3108=CARTESIAN_POINT('',(-4.51,7.396961550602,0.684729635533));+#3109=LINE('',#3102,#2431);+#3110=ORIENTED_EDGE('',*,*,#3111,.T.);+#3111=EDGE_CURVE('',#3107,#591,#3112,.T.);+#3112=CIRCLE('',#3113,0.2);+#3113=AXIS2_PLACEMENT_3D('',#3071,#14,#2437);+#3114=PLANE('',#3115);+#3115=AXIS2_PLACEMENT_3D('',#3116,#452,#13);+#3116=CARTESIAN_POINT('',(-4.51,7.414276639233,0.410238158856));+#3117=ADVANCED_FACE('',(#3118),#3125,.T.);+#3118=FACE_BOUND('',#3119,.F.);+#3119=EDGE_LOOP('',(#3120,#3110,#3123,#3124));+#3120=ORIENTED_EDGE('',*,*,#3121,.T.);+#3121=EDGE_CURVE('',#3039,#3107,#3122,.T.);+#3122=LINE('',#3040,#451);+#3123=ORIENTED_EDGE('',*,*,#590,.F.);+#3124=ORIENTED_EDGE('',*,*,#3043,.F.);+#3125=CYLINDRICAL_SURFACE('',#3126,0.2);+#3126=AXIS2_PLACEMENT_3D('',#3003,#2386,#2437);+#3127=ADVANCED_FACE('',(#3128),#2365,.F.);+#3128=FACE_BOUND('',#3129,.F.);+#3129=EDGE_LOOP('',(#3053,#3130,#3134,#3138));+#3130=ORIENTED_EDGE('',*,*,#3131,.T.);+#3131=EDGE_CURVE('',#3055,#3132,#2359,.T.);+#3132=VERTEX_POINT('',#3133);+#3133=CARTESIAN_POINT('',(-4.29,7.,0.75));+#3134=ORIENTED_EDGE('',*,*,#3135,.T.);+#3135=EDGE_CURVE('',#3132,#611,#3136,.T.);+#3136=LINE('',#3137,#2043);+#3137=CARTESIAN_POINT('',(-4.29,7.,0.630119079428));+#3138=ORIENTED_EDGE('',*,*,#610,.F.);+#3139=ADVANCED_FACE('',(#3140),#3199,.F.);+#3140=FACE_BOUND('',#3141,.F.);+#3141=EDGE_LOOP('',(#3142,#3143,#3149,#3156,#3161,#3168,#3173,#3178,#3183,#3189,#3194,#3198));+#3142=ORIENTED_EDGE('',*,*,#3135,.F.);+#3143=ORIENTED_EDGE('',*,*,#3144,.T.);+#3144=EDGE_CURVE('',#3132,#3145,#3147,.T.);+#3145=VERTEX_POINT('',#3146);+#3146=CARTESIAN_POINT('',(-4.29,7.2,0.75));+#3147=LINE('',#3148,#2377);+#3148=CARTESIAN_POINT('',(-4.29,6.85,0.75));+#3149=ORIENTED_EDGE('',*,*,#3150,.T.);+#3150=EDGE_CURVE('',#3145,#3151,#3153,.T.);+#3151=VERTEX_POINT('',#3152);+#3152=CARTESIAN_POINT('',(-4.29,7.298480775301,0.667364817767));+#3153=CIRCLE('',#3154,0.1);+#3154=AXIS2_PLACEMENT_3D('',#3155,#2386,#2387);+#3155=CARTESIAN_POINT('',(-4.29,7.2,0.65));+#3156=ORIENTED_EDGE('',*,*,#3157,.T.);+#3157=EDGE_CURVE('',#3151,#3158,#3160,.T.);+#3158=VERTEX_POINT('',#3159);+#3159=CARTESIAN_POINT('',(-4.29,7.382385590716,0.165270364467));+#3160=LINE('',#3152,#2393);+#3161=ORIENTED_EDGE('',*,*,#3162,.T.);+#3162=EDGE_CURVE('',#3158,#3163,#3165,.T.);+#3163=VERTEX_POINT('',#3164);+#3164=CARTESIAN_POINT('',(-4.29,7.579347141319,1.387778780781E-16));+#3165=CIRCLE('',#3166,0.2);+#3166=AXIS2_PLACEMENT_3D('',#3167,#452,#2402);+#3167=CARTESIAN_POINT('',(-4.29,7.579347141319,0.2));+#3168=ORIENTED_EDGE('',*,*,#3169,.T.);+#3169=EDGE_CURVE('',#3163,#3170,#3172,.T.);+#3170=VERTEX_POINT('',#3171);+#3171=CARTESIAN_POINT('',(-4.29,8.,1.387778780781E-16));+#3172=LINE('',#3164,#2377);+#3173=ORIENTED_EDGE('',*,*,#3174,.T.);+#3174=EDGE_CURVE('',#3170,#3175,#3177,.T.);+#3175=VERTEX_POINT('',#3176);+#3176=CARTESIAN_POINT('',(-4.29,8.,0.1));+#3177=LINE('',#3171,#2043);+#3178=ORIENTED_EDGE('',*,*,#3179,.T.);+#3179=EDGE_CURVE('',#3175,#3180,#3182,.T.);+#3180=VERTEX_POINT('',#3181);+#3181=CARTESIAN_POINT('',(-4.29,7.579347141319,0.1));+#3182=LINE('',#3176,#407);+#3183=ORIENTED_EDGE('',*,*,#3184,.T.);+#3184=EDGE_CURVE('',#3180,#3185,#3187,.T.);+#3185=VERTEX_POINT('',#3186);+#3186=CARTESIAN_POINT('',(-4.29,7.480866366018,0.182635182233));+#3187=CIRCLE('',#3188,1.E-01);+#3188=AXIS2_PLACEMENT_3D('',#3167,#2424,#2425);+#3189=ORIENTED_EDGE('',*,*,#3190,.T.);+#3190=EDGE_CURVE('',#3185,#3191,#3193,.T.);+#3191=VERTEX_POINT('',#3192);+#3192=CARTESIAN_POINT('',(-4.29,7.396961550602,0.684729635533));+#3193=LINE('',#3186,#2431);+#3194=ORIENTED_EDGE('',*,*,#3195,.T.);+#3195=EDGE_CURVE('',#3191,#623,#3196,.T.);+#3196=CIRCLE('',#3197,0.2);+#3197=AXIS2_PLACEMENT_3D('',#3155,#14,#2437);+#3198=ORIENTED_EDGE('',*,*,#622,.T.);+#3199=PLANE('',#3200);+#3200=AXIS2_PLACEMENT_3D('',#3201,#452,#13);+#3201=CARTESIAN_POINT('',(-4.29,7.414276639233,0.410238158856));+#3202=ADVANCED_FACE('',(#3203),#3266,.T.);+#3203=FACE_BOUND('',#3204,.T.);+#3204=EDGE_LOOP('',(#3205,#3211,#3217,#3224,#3229,#3236,#3241,#3246,#3251,#3257,#3262,#629));+#3205=ORIENTED_EDGE('',*,*,#3206,.F.);+#3206=EDGE_CURVE('',#3207,#631,#3209,.T.);+#3207=VERTEX_POINT('',#3208);+#3208=CARTESIAN_POINT('',(-4.11,7.,0.75));+#3209=LINE('',#3210,#2043);+#3210=CARTESIAN_POINT('',(-4.11,7.,0.630119079428));+#3211=ORIENTED_EDGE('',*,*,#3212,.T.);+#3212=EDGE_CURVE('',#3207,#3213,#3215,.T.);+#3213=VERTEX_POINT('',#3214);+#3214=CARTESIAN_POINT('',(-4.11,7.2,0.75));+#3215=LINE('',#3216,#2377);+#3216=CARTESIAN_POINT('',(-4.11,6.85,0.75));+#3217=ORIENTED_EDGE('',*,*,#3218,.T.);+#3218=EDGE_CURVE('',#3213,#3219,#3221,.T.);+#3219=VERTEX_POINT('',#3220);+#3220=CARTESIAN_POINT('',(-4.11,7.298480775301,0.667364817767));+#3221=CIRCLE('',#3222,0.1);+#3222=AXIS2_PLACEMENT_3D('',#3223,#2386,#2387);+#3223=CARTESIAN_POINT('',(-4.11,7.2,0.65));+#3224=ORIENTED_EDGE('',*,*,#3225,.T.);+#3225=EDGE_CURVE('',#3219,#3226,#3228,.T.);+#3226=VERTEX_POINT('',#3227);+#3227=CARTESIAN_POINT('',(-4.11,7.382385590716,0.165270364467));+#3228=LINE('',#3220,#2393);+#3229=ORIENTED_EDGE('',*,*,#3230,.T.);+#3230=EDGE_CURVE('',#3226,#3231,#3233,.T.);+#3231=VERTEX_POINT('',#3232);+#3232=CARTESIAN_POINT('',(-4.11,7.579347141319,1.387778780781E-16));+#3233=CIRCLE('',#3234,0.2);+#3234=AXIS2_PLACEMENT_3D('',#3235,#452,#2402);+#3235=CARTESIAN_POINT('',(-4.11,7.579347141319,0.2));+#3236=ORIENTED_EDGE('',*,*,#3237,.T.);+#3237=EDGE_CURVE('',#3231,#3238,#3240,.T.);+#3238=VERTEX_POINT('',#3239);+#3239=CARTESIAN_POINT('',(-4.11,8.,1.387778780781E-16));+#3240=LINE('',#3232,#2377);+#3241=ORIENTED_EDGE('',*,*,#3242,.T.);+#3242=EDGE_CURVE('',#3238,#3243,#3245,.T.);+#3243=VERTEX_POINT('',#3244);+#3244=CARTESIAN_POINT('',(-4.11,8.,0.1));+#3245=LINE('',#3239,#2043);+#3246=ORIENTED_EDGE('',*,*,#3247,.T.);+#3247=EDGE_CURVE('',#3243,#3248,#3250,.T.);+#3248=VERTEX_POINT('',#3249);+#3249=CARTESIAN_POINT('',(-4.11,7.579347141319,0.1));+#3250=LINE('',#3244,#407);+#3251=ORIENTED_EDGE('',*,*,#3252,.T.);+#3252=EDGE_CURVE('',#3248,#3253,#3255,.T.);+#3253=VERTEX_POINT('',#3254);+#3254=CARTESIAN_POINT('',(-4.11,7.480866366018,0.182635182233));+#3255=CIRCLE('',#3256,1.E-01);+#3256=AXIS2_PLACEMENT_3D('',#3235,#2424,#2425);+#3257=ORIENTED_EDGE('',*,*,#3258,.T.);+#3258=EDGE_CURVE('',#3253,#3259,#3261,.T.);+#3259=VERTEX_POINT('',#3260);+#3260=CARTESIAN_POINT('',(-4.11,7.396961550602,0.684729635533));+#3261=LINE('',#3254,#2431);+#3262=ORIENTED_EDGE('',*,*,#3263,.T.);+#3263=EDGE_CURVE('',#3259,#626,#3264,.T.);+#3264=CIRCLE('',#3265,0.2);+#3265=AXIS2_PLACEMENT_3D('',#3223,#14,#2437);+#3266=PLANE('',#3267);+#3267=AXIS2_PLACEMENT_3D('',#3268,#452,#13);+#3268=CARTESIAN_POINT('',(-4.11,7.414276639233,0.410238158856));+#3269=ADVANCED_FACE('',(#3270),#3277,.T.);+#3270=FACE_BOUND('',#3271,.F.);+#3271=EDGE_LOOP('',(#3272,#3262,#3275,#3276));+#3272=ORIENTED_EDGE('',*,*,#3273,.T.);+#3273=EDGE_CURVE('',#3191,#3259,#3274,.T.);+#3274=LINE('',#3192,#451);+#3275=ORIENTED_EDGE('',*,*,#625,.F.);+#3276=ORIENTED_EDGE('',*,*,#3195,.F.);+#3277=CYLINDRICAL_SURFACE('',#3278,0.2);+#3278=AXIS2_PLACEMENT_3D('',#3155,#2386,#2437);+#3279=ADVANCED_FACE('',(#3280),#2365,.F.);+#3280=FACE_BOUND('',#3281,.F.);+#3281=EDGE_LOOP('',(#3205,#3282,#3286,#3290));+#3282=ORIENTED_EDGE('',*,*,#3283,.T.);+#3283=EDGE_CURVE('',#3207,#3284,#2359,.T.);+#3284=VERTEX_POINT('',#3285);+#3285=CARTESIAN_POINT('',(-3.89,7.,0.75));+#3286=ORIENTED_EDGE('',*,*,#3287,.T.);+#3287=EDGE_CURVE('',#3284,#646,#3288,.T.);+#3288=LINE('',#3289,#2043);+#3289=CARTESIAN_POINT('',(-3.89,7.,0.630119079428));+#3290=ORIENTED_EDGE('',*,*,#645,.F.);+#3291=ADVANCED_FACE('',(#3292),#3351,.F.);+#3292=FACE_BOUND('',#3293,.F.);+#3293=EDGE_LOOP('',(#3294,#3295,#3301,#3308,#3313,#3320,#3325,#3330,#3335,#3341,#3346,#3350));+#3294=ORIENTED_EDGE('',*,*,#3287,.F.);+#3295=ORIENTED_EDGE('',*,*,#3296,.T.);+#3296=EDGE_CURVE('',#3284,#3297,#3299,.T.);+#3297=VERTEX_POINT('',#3298);+#3298=CARTESIAN_POINT('',(-3.89,7.2,0.75));+#3299=LINE('',#3300,#2377);+#3300=CARTESIAN_POINT('',(-3.89,6.85,0.75));+#3301=ORIENTED_EDGE('',*,*,#3302,.T.);+#3302=EDGE_CURVE('',#3297,#3303,#3305,.T.);+#3303=VERTEX_POINT('',#3304);+#3304=CARTESIAN_POINT('',(-3.89,7.298480775301,0.667364817767));+#3305=CIRCLE('',#3306,0.1);+#3306=AXIS2_PLACEMENT_3D('',#3307,#2386,#2387);+#3307=CARTESIAN_POINT('',(-3.89,7.2,0.65));+#3308=ORIENTED_EDGE('',*,*,#3309,.T.);+#3309=EDGE_CURVE('',#3303,#3310,#3312,.T.);+#3310=VERTEX_POINT('',#3311);+#3311=CARTESIAN_POINT('',(-3.89,7.382385590716,0.165270364467));+#3312=LINE('',#3304,#2393);+#3313=ORIENTED_EDGE('',*,*,#3314,.T.);+#3314=EDGE_CURVE('',#3310,#3315,#3317,.T.);+#3315=VERTEX_POINT('',#3316);+#3316=CARTESIAN_POINT('',(-3.89,7.579347141319,1.387778780781E-16));+#3317=CIRCLE('',#3318,0.2);+#3318=AXIS2_PLACEMENT_3D('',#3319,#452,#2402);+#3319=CARTESIAN_POINT('',(-3.89,7.579347141319,0.2));+#3320=ORIENTED_EDGE('',*,*,#3321,.T.);+#3321=EDGE_CURVE('',#3315,#3322,#3324,.T.);+#3322=VERTEX_POINT('',#3323);+#3323=CARTESIAN_POINT('',(-3.89,8.,1.387778780781E-16));+#3324=LINE('',#3316,#2377);+#3325=ORIENTED_EDGE('',*,*,#3326,.T.);+#3326=EDGE_CURVE('',#3322,#3327,#3329,.T.);+#3327=VERTEX_POINT('',#3328);+#3328=CARTESIAN_POINT('',(-3.89,8.,0.1));+#3329=LINE('',#3323,#2043);+#3330=ORIENTED_EDGE('',*,*,#3331,.T.);+#3331=EDGE_CURVE('',#3327,#3332,#3334,.T.);+#3332=VERTEX_POINT('',#3333);+#3333=CARTESIAN_POINT('',(-3.89,7.579347141319,0.1));+#3334=LINE('',#3328,#407);+#3335=ORIENTED_EDGE('',*,*,#3336,.T.);+#3336=EDGE_CURVE('',#3332,#3337,#3339,.T.);+#3337=VERTEX_POINT('',#3338);+#3338=CARTESIAN_POINT('',(-3.89,7.480866366018,0.182635182233));+#3339=CIRCLE('',#3340,1.E-01);+#3340=AXIS2_PLACEMENT_3D('',#3319,#2424,#2425);+#3341=ORIENTED_EDGE('',*,*,#3342,.T.);+#3342=EDGE_CURVE('',#3337,#3343,#3345,.T.);+#3343=VERTEX_POINT('',#3344);+#3344=CARTESIAN_POINT('',(-3.89,7.396961550602,0.684729635533));+#3345=LINE('',#3338,#2431);+#3346=ORIENTED_EDGE('',*,*,#3347,.T.);+#3347=EDGE_CURVE('',#3343,#658,#3348,.T.);+#3348=CIRCLE('',#3349,0.2);+#3349=AXIS2_PLACEMENT_3D('',#3307,#14,#2437);+#3350=ORIENTED_EDGE('',*,*,#657,.T.);+#3351=PLANE('',#3352);+#3352=AXIS2_PLACEMENT_3D('',#3353,#452,#13);+#3353=CARTESIAN_POINT('',(-3.89,7.414276639233,0.410238158856));+#3354=ADVANCED_FACE('',(#3355),#3418,.T.);+#3355=FACE_BOUND('',#3356,.T.);+#3356=EDGE_LOOP('',(#3357,#3363,#3369,#3376,#3381,#3388,#3393,#3398,#3403,#3409,#3414,#664));+#3357=ORIENTED_EDGE('',*,*,#3358,.F.);+#3358=EDGE_CURVE('',#3359,#666,#3361,.T.);+#3359=VERTEX_POINT('',#3360);+#3360=CARTESIAN_POINT('',(-3.71,7.,0.75));+#3361=LINE('',#3362,#2043);+#3362=CARTESIAN_POINT('',(-3.71,7.,0.630119079428));+#3363=ORIENTED_EDGE('',*,*,#3364,.T.);+#3364=EDGE_CURVE('',#3359,#3365,#3367,.T.);+#3365=VERTEX_POINT('',#3366);+#3366=CARTESIAN_POINT('',(-3.71,7.2,0.75));+#3367=LINE('',#3368,#2377);+#3368=CARTESIAN_POINT('',(-3.71,6.85,0.75));+#3369=ORIENTED_EDGE('',*,*,#3370,.T.);+#3370=EDGE_CURVE('',#3365,#3371,#3373,.T.);+#3371=VERTEX_POINT('',#3372);+#3372=CARTESIAN_POINT('',(-3.71,7.298480775301,0.667364817767));+#3373=CIRCLE('',#3374,0.1);+#3374=AXIS2_PLACEMENT_3D('',#3375,#2386,#2387);+#3375=CARTESIAN_POINT('',(-3.71,7.2,0.65));+#3376=ORIENTED_EDGE('',*,*,#3377,.T.);+#3377=EDGE_CURVE('',#3371,#3378,#3380,.T.);+#3378=VERTEX_POINT('',#3379);+#3379=CARTESIAN_POINT('',(-3.71,7.382385590716,0.165270364467));+#3380=LINE('',#3372,#2393);+#3381=ORIENTED_EDGE('',*,*,#3382,.T.);+#3382=EDGE_CURVE('',#3378,#3383,#3385,.T.);+#3383=VERTEX_POINT('',#3384);+#3384=CARTESIAN_POINT('',(-3.71,7.579347141319,1.387778780781E-16));+#3385=CIRCLE('',#3386,0.2);+#3386=AXIS2_PLACEMENT_3D('',#3387,#452,#2402);+#3387=CARTESIAN_POINT('',(-3.71,7.579347141319,0.2));+#3388=ORIENTED_EDGE('',*,*,#3389,.T.);+#3389=EDGE_CURVE('',#3383,#3390,#3392,.T.);+#3390=VERTEX_POINT('',#3391);+#3391=CARTESIAN_POINT('',(-3.71,8.,1.387778780781E-16));+#3392=LINE('',#3384,#2377);+#3393=ORIENTED_EDGE('',*,*,#3394,.T.);+#3394=EDGE_CURVE('',#3390,#3395,#3397,.T.);+#3395=VERTEX_POINT('',#3396);+#3396=CARTESIAN_POINT('',(-3.71,8.,0.1));+#3397=LINE('',#3391,#2043);+#3398=ORIENTED_EDGE('',*,*,#3399,.T.);+#3399=EDGE_CURVE('',#3395,#3400,#3402,.T.);+#3400=VERTEX_POINT('',#3401);+#3401=CARTESIAN_POINT('',(-3.71,7.579347141319,0.1));+#3402=LINE('',#3396,#407);+#3403=ORIENTED_EDGE('',*,*,#3404,.T.);+#3404=EDGE_CURVE('',#3400,#3405,#3407,.T.);+#3405=VERTEX_POINT('',#3406);+#3406=CARTESIAN_POINT('',(-3.71,7.480866366018,0.182635182233));+#3407=CIRCLE('',#3408,1.E-01);+#3408=AXIS2_PLACEMENT_3D('',#3387,#2424,#2425);+#3409=ORIENTED_EDGE('',*,*,#3410,.T.);+#3410=EDGE_CURVE('',#3405,#3411,#3413,.T.);+#3411=VERTEX_POINT('',#3412);+#3412=CARTESIAN_POINT('',(-3.71,7.396961550602,0.684729635533));+#3413=LINE('',#3406,#2431);+#3414=ORIENTED_EDGE('',*,*,#3415,.T.);+#3415=EDGE_CURVE('',#3411,#661,#3416,.T.);+#3416=CIRCLE('',#3417,0.2);+#3417=AXIS2_PLACEMENT_3D('',#3375,#14,#2437);+#3418=PLANE('',#3419);+#3419=AXIS2_PLACEMENT_3D('',#3420,#452,#13);+#3420=CARTESIAN_POINT('',(-3.71,7.414276639233,0.410238158856));+#3421=ADVANCED_FACE('',(#3422),#3429,.T.);+#3422=FACE_BOUND('',#3423,.F.);+#3423=EDGE_LOOP('',(#3424,#3414,#3427,#3428));+#3424=ORIENTED_EDGE('',*,*,#3425,.T.);+#3425=EDGE_CURVE('',#3343,#3411,#3426,.T.);+#3426=LINE('',#3344,#451);+#3427=ORIENTED_EDGE('',*,*,#660,.F.);+#3428=ORIENTED_EDGE('',*,*,#3347,.F.);+#3429=CYLINDRICAL_SURFACE('',#3430,0.2);+#3430=AXIS2_PLACEMENT_3D('',#3307,#2386,#2437);+#3431=ADVANCED_FACE('',(#3432),#2365,.F.);+#3432=FACE_BOUND('',#3433,.F.);+#3433=EDGE_LOOP('',(#3357,#3434,#3438,#3442));+#3434=ORIENTED_EDGE('',*,*,#3435,.T.);+#3435=EDGE_CURVE('',#3359,#3436,#2359,.T.);+#3436=VERTEX_POINT('',#3437);+#3437=CARTESIAN_POINT('',(-3.49,7.,0.75));+#3438=ORIENTED_EDGE('',*,*,#3439,.T.);+#3439=EDGE_CURVE('',#3436,#681,#3440,.T.);+#3440=LINE('',#3441,#2043);+#3441=CARTESIAN_POINT('',(-3.49,7.,0.630119079428));+#3442=ORIENTED_EDGE('',*,*,#680,.F.);+#3443=ADVANCED_FACE('',(#3444),#3503,.F.);+#3444=FACE_BOUND('',#3445,.F.);+#3445=EDGE_LOOP('',(#3446,#3447,#3453,#3460,#3465,#3472,#3477,#3482,#3487,#3493,#3498,#3502));+#3446=ORIENTED_EDGE('',*,*,#3439,.F.);+#3447=ORIENTED_EDGE('',*,*,#3448,.T.);+#3448=EDGE_CURVE('',#3436,#3449,#3451,.T.);+#3449=VERTEX_POINT('',#3450);+#3450=CARTESIAN_POINT('',(-3.49,7.2,0.75));+#3451=LINE('',#3452,#2377);+#3452=CARTESIAN_POINT('',(-3.49,6.85,0.75));+#3453=ORIENTED_EDGE('',*,*,#3454,.T.);+#3454=EDGE_CURVE('',#3449,#3455,#3457,.T.);+#3455=VERTEX_POINT('',#3456);+#3456=CARTESIAN_POINT('',(-3.49,7.298480775301,0.667364817767));+#3457=CIRCLE('',#3458,0.1);+#3458=AXIS2_PLACEMENT_3D('',#3459,#2386,#2387);+#3459=CARTESIAN_POINT('',(-3.49,7.2,0.65));+#3460=ORIENTED_EDGE('',*,*,#3461,.T.);+#3461=EDGE_CURVE('',#3455,#3462,#3464,.T.);+#3462=VERTEX_POINT('',#3463);+#3463=CARTESIAN_POINT('',(-3.49,7.382385590716,0.165270364467));+#3464=LINE('',#3456,#2393);+#3465=ORIENTED_EDGE('',*,*,#3466,.T.);+#3466=EDGE_CURVE('',#3462,#3467,#3469,.T.);+#3467=VERTEX_POINT('',#3468);+#3468=CARTESIAN_POINT('',(-3.49,7.579347141319,1.387778780781E-16));+#3469=CIRCLE('',#3470,0.2);+#3470=AXIS2_PLACEMENT_3D('',#3471,#452,#2402);+#3471=CARTESIAN_POINT('',(-3.49,7.579347141319,0.2));+#3472=ORIENTED_EDGE('',*,*,#3473,.T.);+#3473=EDGE_CURVE('',#3467,#3474,#3476,.T.);+#3474=VERTEX_POINT('',#3475);+#3475=CARTESIAN_POINT('',(-3.49,8.,1.387778780781E-16));+#3476=LINE('',#3468,#2377);+#3477=ORIENTED_EDGE('',*,*,#3478,.T.);+#3478=EDGE_CURVE('',#3474,#3479,#3481,.T.);+#3479=VERTEX_POINT('',#3480);+#3480=CARTESIAN_POINT('',(-3.49,8.,0.1));+#3481=LINE('',#3475,#2043);+#3482=ORIENTED_EDGE('',*,*,#3483,.T.);+#3483=EDGE_CURVE('',#3479,#3484,#3486,.T.);+#3484=VERTEX_POINT('',#3485);+#3485=CARTESIAN_POINT('',(-3.49,7.579347141319,0.1));+#3486=LINE('',#3480,#407);+#3487=ORIENTED_EDGE('',*,*,#3488,.T.);+#3488=EDGE_CURVE('',#3484,#3489,#3491,.T.);+#3489=VERTEX_POINT('',#3490);+#3490=CARTESIAN_POINT('',(-3.49,7.480866366018,0.182635182233));+#3491=CIRCLE('',#3492,1.E-01);+#3492=AXIS2_PLACEMENT_3D('',#3471,#2424,#2425);+#3493=ORIENTED_EDGE('',*,*,#3494,.T.);+#3494=EDGE_CURVE('',#3489,#3495,#3497,.T.);+#3495=VERTEX_POINT('',#3496);+#3496=CARTESIAN_POINT('',(-3.49,7.396961550602,0.684729635533));+#3497=LINE('',#3490,#2431);+#3498=ORIENTED_EDGE('',*,*,#3499,.T.);+#3499=EDGE_CURVE('',#3495,#693,#3500,.T.);+#3500=CIRCLE('',#3501,0.2);+#3501=AXIS2_PLACEMENT_3D('',#3459,#14,#2437);+#3502=ORIENTED_EDGE('',*,*,#692,.T.);+#3503=PLANE('',#3504);+#3504=AXIS2_PLACEMENT_3D('',#3505,#452,#13);+#3505=CARTESIAN_POINT('',(-3.49,7.414276639233,0.410238158856));+#3506=ADVANCED_FACE('',(#3507),#3570,.T.);+#3507=FACE_BOUND('',#3508,.T.);+#3508=EDGE_LOOP('',(#3509,#3515,#3521,#3528,#3533,#3540,#3545,#3550,#3555,#3561,#3566,#699));+#3509=ORIENTED_EDGE('',*,*,#3510,.F.);+#3510=EDGE_CURVE('',#3511,#701,#3513,.T.);+#3511=VERTEX_POINT('',#3512);+#3512=CARTESIAN_POINT('',(-3.31,7.,0.75));+#3513=LINE('',#3514,#2043);+#3514=CARTESIAN_POINT('',(-3.31,7.,0.630119079428));+#3515=ORIENTED_EDGE('',*,*,#3516,.T.);+#3516=EDGE_CURVE('',#3511,#3517,#3519,.T.);+#3517=VERTEX_POINT('',#3518);+#3518=CARTESIAN_POINT('',(-3.31,7.2,0.75));+#3519=LINE('',#3520,#2377);+#3520=CARTESIAN_POINT('',(-3.31,6.85,0.75));+#3521=ORIENTED_EDGE('',*,*,#3522,.T.);+#3522=EDGE_CURVE('',#3517,#3523,#3525,.T.);+#3523=VERTEX_POINT('',#3524);+#3524=CARTESIAN_POINT('',(-3.31,7.298480775301,0.667364817767));+#3525=CIRCLE('',#3526,0.1);+#3526=AXIS2_PLACEMENT_3D('',#3527,#2386,#2387);+#3527=CARTESIAN_POINT('',(-3.31,7.2,0.65));+#3528=ORIENTED_EDGE('',*,*,#3529,.T.);+#3529=EDGE_CURVE('',#3523,#3530,#3532,.T.);+#3530=VERTEX_POINT('',#3531);+#3531=CARTESIAN_POINT('',(-3.31,7.382385590716,0.165270364467));+#3532=LINE('',#3524,#2393);+#3533=ORIENTED_EDGE('',*,*,#3534,.T.);+#3534=EDGE_CURVE('',#3530,#3535,#3537,.T.);+#3535=VERTEX_POINT('',#3536);+#3536=CARTESIAN_POINT('',(-3.31,7.579347141319,1.387778780781E-16));+#3537=CIRCLE('',#3538,0.2);+#3538=AXIS2_PLACEMENT_3D('',#3539,#452,#2402);+#3539=CARTESIAN_POINT('',(-3.31,7.579347141319,0.2));+#3540=ORIENTED_EDGE('',*,*,#3541,.T.);+#3541=EDGE_CURVE('',#3535,#3542,#3544,.T.);+#3542=VERTEX_POINT('',#3543);+#3543=CARTESIAN_POINT('',(-3.31,8.,1.387778780781E-16));+#3544=LINE('',#3536,#2377);+#3545=ORIENTED_EDGE('',*,*,#3546,.T.);+#3546=EDGE_CURVE('',#3542,#3547,#3549,.T.);+#3547=VERTEX_POINT('',#3548);+#3548=CARTESIAN_POINT('',(-3.31,8.,0.1));+#3549=LINE('',#3543,#2043);+#3550=ORIENTED_EDGE('',*,*,#3551,.T.);+#3551=EDGE_CURVE('',#3547,#3552,#3554,.T.);+#3552=VERTEX_POINT('',#3553);+#3553=CARTESIAN_POINT('',(-3.31,7.579347141319,0.1));+#3554=LINE('',#3548,#407);+#3555=ORIENTED_EDGE('',*,*,#3556,.T.);+#3556=EDGE_CURVE('',#3552,#3557,#3559,.T.);+#3557=VERTEX_POINT('',#3558);+#3558=CARTESIAN_POINT('',(-3.31,7.480866366018,0.182635182233));+#3559=CIRCLE('',#3560,1.E-01);+#3560=AXIS2_PLACEMENT_3D('',#3539,#2424,#2425);+#3561=ORIENTED_EDGE('',*,*,#3562,.T.);+#3562=EDGE_CURVE('',#3557,#3563,#3565,.T.);+#3563=VERTEX_POINT('',#3564);+#3564=CARTESIAN_POINT('',(-3.31,7.396961550602,0.684729635533));+#3565=LINE('',#3558,#2431);+#3566=ORIENTED_EDGE('',*,*,#3567,.T.);+#3567=EDGE_CURVE('',#3563,#696,#3568,.T.);+#3568=CIRCLE('',#3569,0.2);+#3569=AXIS2_PLACEMENT_3D('',#3527,#14,#2437);+#3570=PLANE('',#3571);+#3571=AXIS2_PLACEMENT_3D('',#3572,#452,#13);+#3572=CARTESIAN_POINT('',(-3.31,7.414276639233,0.410238158856));+#3573=ADVANCED_FACE('',(#3574),#3581,.T.);+#3574=FACE_BOUND('',#3575,.F.);+#3575=EDGE_LOOP('',(#3576,#3566,#3579,#3580));+#3576=ORIENTED_EDGE('',*,*,#3577,.T.);+#3577=EDGE_CURVE('',#3495,#3563,#3578,.T.);+#3578=LINE('',#3496,#451);+#3579=ORIENTED_EDGE('',*,*,#695,.F.);+#3580=ORIENTED_EDGE('',*,*,#3499,.F.);+#3581=CYLINDRICAL_SURFACE('',#3582,0.2);+#3582=AXIS2_PLACEMENT_3D('',#3459,#2386,#2437);+#3583=ADVANCED_FACE('',(#3584),#2365,.F.);+#3584=FACE_BOUND('',#3585,.F.);+#3585=EDGE_LOOP('',(#3509,#3586,#3590,#3594));+#3586=ORIENTED_EDGE('',*,*,#3587,.T.);+#3587=EDGE_CURVE('',#3511,#3588,#2359,.T.);+#3588=VERTEX_POINT('',#3589);+#3589=CARTESIAN_POINT('',(-3.09,7.,0.75));+#3590=ORIENTED_EDGE('',*,*,#3591,.T.);+#3591=EDGE_CURVE('',#3588,#716,#3592,.T.);+#3592=LINE('',#3593,#2043);+#3593=CARTESIAN_POINT('',(-3.09,7.,0.630119079428));+#3594=ORIENTED_EDGE('',*,*,#715,.F.);+#3595=ADVANCED_FACE('',(#3596),#3655,.F.);+#3596=FACE_BOUND('',#3597,.F.);+#3597=EDGE_LOOP('',(#3598,#3599,#3605,#3612,#3617,#3624,#3629,#3634,#3639,#3645,#3650,#3654));+#3598=ORIENTED_EDGE('',*,*,#3591,.F.);+#3599=ORIENTED_EDGE('',*,*,#3600,.T.);+#3600=EDGE_CURVE('',#3588,#3601,#3603,.T.);+#3601=VERTEX_POINT('',#3602);+#3602=CARTESIAN_POINT('',(-3.09,7.2,0.75));+#3603=LINE('',#3604,#2377);+#3604=CARTESIAN_POINT('',(-3.09,6.85,0.75));+#3605=ORIENTED_EDGE('',*,*,#3606,.T.);+#3606=EDGE_CURVE('',#3601,#3607,#3609,.T.);+#3607=VERTEX_POINT('',#3608);+#3608=CARTESIAN_POINT('',(-3.09,7.298480775301,0.667364817767));+#3609=CIRCLE('',#3610,0.1);+#3610=AXIS2_PLACEMENT_3D('',#3611,#2386,#2387);+#3611=CARTESIAN_POINT('',(-3.09,7.2,0.65));+#3612=ORIENTED_EDGE('',*,*,#3613,.T.);+#3613=EDGE_CURVE('',#3607,#3614,#3616,.T.);+#3614=VERTEX_POINT('',#3615);+#3615=CARTESIAN_POINT('',(-3.09,7.382385590716,0.165270364467));+#3616=LINE('',#3608,#2393);+#3617=ORIENTED_EDGE('',*,*,#3618,.T.);+#3618=EDGE_CURVE('',#3614,#3619,#3621,.T.);+#3619=VERTEX_POINT('',#3620);+#3620=CARTESIAN_POINT('',(-3.09,7.579347141319,1.387778780781E-16));+#3621=CIRCLE('',#3622,0.2);+#3622=AXIS2_PLACEMENT_3D('',#3623,#452,#2402);+#3623=CARTESIAN_POINT('',(-3.09,7.579347141319,0.2));+#3624=ORIENTED_EDGE('',*,*,#3625,.T.);+#3625=EDGE_CURVE('',#3619,#3626,#3628,.T.);+#3626=VERTEX_POINT('',#3627);+#3627=CARTESIAN_POINT('',(-3.09,8.,1.387778780781E-16));+#3628=LINE('',#3620,#2377);+#3629=ORIENTED_EDGE('',*,*,#3630,.T.);+#3630=EDGE_CURVE('',#3626,#3631,#3633,.T.);+#3631=VERTEX_POINT('',#3632);+#3632=CARTESIAN_POINT('',(-3.09,8.,0.1));+#3633=LINE('',#3627,#2043);+#3634=ORIENTED_EDGE('',*,*,#3635,.T.);+#3635=EDGE_CURVE('',#3631,#3636,#3638,.T.);+#3636=VERTEX_POINT('',#3637);+#3637=CARTESIAN_POINT('',(-3.09,7.579347141319,0.1));+#3638=LINE('',#3632,#407);+#3639=ORIENTED_EDGE('',*,*,#3640,.T.);+#3640=EDGE_CURVE('',#3636,#3641,#3643,.T.);+#3641=VERTEX_POINT('',#3642);+#3642=CARTESIAN_POINT('',(-3.09,7.480866366018,0.182635182233));+#3643=CIRCLE('',#3644,1.E-01);+#3644=AXIS2_PLACEMENT_3D('',#3623,#2424,#2425);+#3645=ORIENTED_EDGE('',*,*,#3646,.T.);+#3646=EDGE_CURVE('',#3641,#3647,#3649,.T.);+#3647=VERTEX_POINT('',#3648);+#3648=CARTESIAN_POINT('',(-3.09,7.396961550602,0.684729635533));+#3649=LINE('',#3642,#2431);+#3650=ORIENTED_EDGE('',*,*,#3651,.T.);+#3651=EDGE_CURVE('',#3647,#728,#3652,.T.);+#3652=CIRCLE('',#3653,0.2);+#3653=AXIS2_PLACEMENT_3D('',#3611,#14,#2437);+#3654=ORIENTED_EDGE('',*,*,#727,.T.);+#3655=PLANE('',#3656);+#3656=AXIS2_PLACEMENT_3D('',#3657,#452,#13);+#3657=CARTESIAN_POINT('',(-3.09,7.414276639233,0.410238158856));+#3658=ADVANCED_FACE('',(#3659),#3722,.T.);+#3659=FACE_BOUND('',#3660,.T.);+#3660=EDGE_LOOP('',(#3661,#3667,#3673,#3680,#3685,#3692,#3697,#3702,#3707,#3713,#3718,#734));+#3661=ORIENTED_EDGE('',*,*,#3662,.F.);+#3662=EDGE_CURVE('',#3663,#736,#3665,.T.);+#3663=VERTEX_POINT('',#3664);+#3664=CARTESIAN_POINT('',(-2.91,7.,0.75));+#3665=LINE('',#3666,#2043);+#3666=CARTESIAN_POINT('',(-2.91,7.,0.630119079428));+#3667=ORIENTED_EDGE('',*,*,#3668,.T.);+#3668=EDGE_CURVE('',#3663,#3669,#3671,.T.);+#3669=VERTEX_POINT('',#3670);+#3670=CARTESIAN_POINT('',(-2.91,7.2,0.75));+#3671=LINE('',#3672,#2377);+#3672=CARTESIAN_POINT('',(-2.91,6.85,0.75));+#3673=ORIENTED_EDGE('',*,*,#3674,.T.);+#3674=EDGE_CURVE('',#3669,#3675,#3677,.T.);+#3675=VERTEX_POINT('',#3676);+#3676=CARTESIAN_POINT('',(-2.91,7.298480775301,0.667364817767));+#3677=CIRCLE('',#3678,0.1);+#3678=AXIS2_PLACEMENT_3D('',#3679,#2386,#2387);+#3679=CARTESIAN_POINT('',(-2.91,7.2,0.65));+#3680=ORIENTED_EDGE('',*,*,#3681,.T.);+#3681=EDGE_CURVE('',#3675,#3682,#3684,.T.);+#3682=VERTEX_POINT('',#3683);+#3683=CARTESIAN_POINT('',(-2.91,7.382385590716,0.165270364467));+#3684=LINE('',#3676,#2393);+#3685=ORIENTED_EDGE('',*,*,#3686,.T.);+#3686=EDGE_CURVE('',#3682,#3687,#3689,.T.);+#3687=VERTEX_POINT('',#3688);+#3688=CARTESIAN_POINT('',(-2.91,7.579347141319,1.387778780781E-16));+#3689=CIRCLE('',#3690,0.2);+#3690=AXIS2_PLACEMENT_3D('',#3691,#452,#2402);+#3691=CARTESIAN_POINT('',(-2.91,7.579347141319,0.2));+#3692=ORIENTED_EDGE('',*,*,#3693,.T.);+#3693=EDGE_CURVE('',#3687,#3694,#3696,.T.);+#3694=VERTEX_POINT('',#3695);+#3695=CARTESIAN_POINT('',(-2.91,8.,1.387778780781E-16));+#3696=LINE('',#3688,#2377);+#3697=ORIENTED_EDGE('',*,*,#3698,.T.);+#3698=EDGE_CURVE('',#3694,#3699,#3701,.T.);+#3699=VERTEX_POINT('',#3700);+#3700=CARTESIAN_POINT('',(-2.91,8.,0.1));+#3701=LINE('',#3695,#2043);+#3702=ORIENTED_EDGE('',*,*,#3703,.T.);+#3703=EDGE_CURVE('',#3699,#3704,#3706,.T.);+#3704=VERTEX_POINT('',#3705);+#3705=CARTESIAN_POINT('',(-2.91,7.579347141319,0.1));+#3706=LINE('',#3700,#407);+#3707=ORIENTED_EDGE('',*,*,#3708,.T.);+#3708=EDGE_CURVE('',#3704,#3709,#3711,.T.);+#3709=VERTEX_POINT('',#3710);+#3710=CARTESIAN_POINT('',(-2.91,7.480866366018,0.182635182233));+#3711=CIRCLE('',#3712,1.E-01);+#3712=AXIS2_PLACEMENT_3D('',#3691,#2424,#2425);+#3713=ORIENTED_EDGE('',*,*,#3714,.T.);+#3714=EDGE_CURVE('',#3709,#3715,#3717,.T.);+#3715=VERTEX_POINT('',#3716);+#3716=CARTESIAN_POINT('',(-2.91,7.396961550602,0.684729635533));+#3717=LINE('',#3710,#2431);+#3718=ORIENTED_EDGE('',*,*,#3719,.T.);+#3719=EDGE_CURVE('',#3715,#731,#3720,.T.);+#3720=CIRCLE('',#3721,0.2);+#3721=AXIS2_PLACEMENT_3D('',#3679,#14,#2437);+#3722=PLANE('',#3723);+#3723=AXIS2_PLACEMENT_3D('',#3724,#452,#13);+#3724=CARTESIAN_POINT('',(-2.91,7.414276639233,0.410238158856));+#3725=ADVANCED_FACE('',(#3726),#3733,.T.);+#3726=FACE_BOUND('',#3727,.F.);+#3727=EDGE_LOOP('',(#3728,#3718,#3731,#3732));+#3728=ORIENTED_EDGE('',*,*,#3729,.T.);+#3729=EDGE_CURVE('',#3647,#3715,#3730,.T.);+#3730=LINE('',#3648,#451);+#3731=ORIENTED_EDGE('',*,*,#730,.F.);+#3732=ORIENTED_EDGE('',*,*,#3651,.F.);+#3733=CYLINDRICAL_SURFACE('',#3734,0.2);+#3734=AXIS2_PLACEMENT_3D('',#3611,#2386,#2437);+#3735=ADVANCED_FACE('',(#3736),#2365,.F.);+#3736=FACE_BOUND('',#3737,.F.);+#3737=EDGE_LOOP('',(#3661,#3738,#3742,#3746));+#3738=ORIENTED_EDGE('',*,*,#3739,.T.);+#3739=EDGE_CURVE('',#3663,#3740,#2359,.T.);+#3740=VERTEX_POINT('',#3741);+#3741=CARTESIAN_POINT('',(-2.69,7.,0.75));+#3742=ORIENTED_EDGE('',*,*,#3743,.T.);+#3743=EDGE_CURVE('',#3740,#751,#3744,.T.);+#3744=LINE('',#3745,#2043);+#3745=CARTESIAN_POINT('',(-2.69,7.,0.630119079428));+#3746=ORIENTED_EDGE('',*,*,#750,.F.);+#3747=ADVANCED_FACE('',(#3748),#3807,.F.);+#3748=FACE_BOUND('',#3749,.F.);+#3749=EDGE_LOOP('',(#3750,#3751,#3757,#3764,#3769,#3776,#3781,#3786,#3791,#3797,#3802,#3806));+#3750=ORIENTED_EDGE('',*,*,#3743,.F.);+#3751=ORIENTED_EDGE('',*,*,#3752,.T.);+#3752=EDGE_CURVE('',#3740,#3753,#3755,.T.);+#3753=VERTEX_POINT('',#3754);+#3754=CARTESIAN_POINT('',(-2.69,7.2,0.75));+#3755=LINE('',#3756,#2377);+#3756=CARTESIAN_POINT('',(-2.69,6.85,0.75));+#3757=ORIENTED_EDGE('',*,*,#3758,.T.);+#3758=EDGE_CURVE('',#3753,#3759,#3761,.T.);+#3759=VERTEX_POINT('',#3760);+#3760=CARTESIAN_POINT('',(-2.69,7.298480775301,0.667364817767));+#3761=CIRCLE('',#3762,0.1);+#3762=AXIS2_PLACEMENT_3D('',#3763,#2386,#2387);+#3763=CARTESIAN_POINT('',(-2.69,7.2,0.65));+#3764=ORIENTED_EDGE('',*,*,#3765,.T.);+#3765=EDGE_CURVE('',#3759,#3766,#3768,.T.);+#3766=VERTEX_POINT('',#3767);+#3767=CARTESIAN_POINT('',(-2.69,7.382385590716,0.165270364467));+#3768=LINE('',#3760,#2393);+#3769=ORIENTED_EDGE('',*,*,#3770,.T.);+#3770=EDGE_CURVE('',#3766,#3771,#3773,.T.);+#3771=VERTEX_POINT('',#3772);+#3772=CARTESIAN_POINT('',(-2.69,7.579347141319,1.387778780781E-16));+#3773=CIRCLE('',#3774,0.2);+#3774=AXIS2_PLACEMENT_3D('',#3775,#452,#2402);+#3775=CARTESIAN_POINT('',(-2.69,7.579347141319,0.2));+#3776=ORIENTED_EDGE('',*,*,#3777,.T.);+#3777=EDGE_CURVE('',#3771,#3778,#3780,.T.);+#3778=VERTEX_POINT('',#3779);+#3779=CARTESIAN_POINT('',(-2.69,8.,1.387778780781E-16));+#3780=LINE('',#3772,#2377);+#3781=ORIENTED_EDGE('',*,*,#3782,.T.);+#3782=EDGE_CURVE('',#3778,#3783,#3785,.T.);+#3783=VERTEX_POINT('',#3784);+#3784=CARTESIAN_POINT('',(-2.69,8.,0.1));+#3785=LINE('',#3779,#2043);+#3786=ORIENTED_EDGE('',*,*,#3787,.T.);+#3787=EDGE_CURVE('',#3783,#3788,#3790,.T.);+#3788=VERTEX_POINT('',#3789);+#3789=CARTESIAN_POINT('',(-2.69,7.579347141319,0.1));+#3790=LINE('',#3784,#407);+#3791=ORIENTED_EDGE('',*,*,#3792,.T.);+#3792=EDGE_CURVE('',#3788,#3793,#3795,.T.);+#3793=VERTEX_POINT('',#3794);+#3794=CARTESIAN_POINT('',(-2.69,7.480866366018,0.182635182233));+#3795=CIRCLE('',#3796,1.E-01);+#3796=AXIS2_PLACEMENT_3D('',#3775,#2424,#2425);+#3797=ORIENTED_EDGE('',*,*,#3798,.T.);+#3798=EDGE_CURVE('',#3793,#3799,#3801,.T.);+#3799=VERTEX_POINT('',#3800);+#3800=CARTESIAN_POINT('',(-2.69,7.396961550602,0.684729635533));+#3801=LINE('',#3794,#2431);+#3802=ORIENTED_EDGE('',*,*,#3803,.T.);+#3803=EDGE_CURVE('',#3799,#763,#3804,.T.);+#3804=CIRCLE('',#3805,0.2);+#3805=AXIS2_PLACEMENT_3D('',#3763,#14,#2437);+#3806=ORIENTED_EDGE('',*,*,#762,.T.);+#3807=PLANE('',#3808);+#3808=AXIS2_PLACEMENT_3D('',#3809,#452,#13);+#3809=CARTESIAN_POINT('',(-2.69,7.414276639233,0.410238158856));+#3810=ADVANCED_FACE('',(#3811),#3874,.T.);+#3811=FACE_BOUND('',#3812,.T.);+#3812=EDGE_LOOP('',(#3813,#3819,#3825,#3832,#3837,#3844,#3849,#3854,#3859,#3865,#3870,#769));+#3813=ORIENTED_EDGE('',*,*,#3814,.F.);+#3814=EDGE_CURVE('',#3815,#771,#3817,.T.);+#3815=VERTEX_POINT('',#3816);+#3816=CARTESIAN_POINT('',(-2.51,7.,0.75));+#3817=LINE('',#3818,#2043);+#3818=CARTESIAN_POINT('',(-2.51,7.,0.630119079428));+#3819=ORIENTED_EDGE('',*,*,#3820,.T.);+#3820=EDGE_CURVE('',#3815,#3821,#3823,.T.);+#3821=VERTEX_POINT('',#3822);+#3822=CARTESIAN_POINT('',(-2.51,7.2,0.75));+#3823=LINE('',#3824,#2377);+#3824=CARTESIAN_POINT('',(-2.51,6.85,0.75));+#3825=ORIENTED_EDGE('',*,*,#3826,.T.);+#3826=EDGE_CURVE('',#3821,#3827,#3829,.T.);+#3827=VERTEX_POINT('',#3828);+#3828=CARTESIAN_POINT('',(-2.51,7.298480775301,0.667364817767));+#3829=CIRCLE('',#3830,0.1);+#3830=AXIS2_PLACEMENT_3D('',#3831,#2386,#2387);+#3831=CARTESIAN_POINT('',(-2.51,7.2,0.65));+#3832=ORIENTED_EDGE('',*,*,#3833,.T.);+#3833=EDGE_CURVE('',#3827,#3834,#3836,.T.);+#3834=VERTEX_POINT('',#3835);+#3835=CARTESIAN_POINT('',(-2.51,7.382385590716,0.165270364467));+#3836=LINE('',#3828,#2393);+#3837=ORIENTED_EDGE('',*,*,#3838,.T.);+#3838=EDGE_CURVE('',#3834,#3839,#3841,.T.);+#3839=VERTEX_POINT('',#3840);+#3840=CARTESIAN_POINT('',(-2.51,7.579347141319,1.387778780781E-16));+#3841=CIRCLE('',#3842,0.2);+#3842=AXIS2_PLACEMENT_3D('',#3843,#452,#2402);+#3843=CARTESIAN_POINT('',(-2.51,7.579347141319,0.2));+#3844=ORIENTED_EDGE('',*,*,#3845,.T.);+#3845=EDGE_CURVE('',#3839,#3846,#3848,.T.);+#3846=VERTEX_POINT('',#3847);+#3847=CARTESIAN_POINT('',(-2.51,8.,1.387778780781E-16));+#3848=LINE('',#3840,#2377);+#3849=ORIENTED_EDGE('',*,*,#3850,.T.);+#3850=EDGE_CURVE('',#3846,#3851,#3853,.T.);+#3851=VERTEX_POINT('',#3852);+#3852=CARTESIAN_POINT('',(-2.51,8.,0.1));+#3853=LINE('',#3847,#2043);+#3854=ORIENTED_EDGE('',*,*,#3855,.T.);+#3855=EDGE_CURVE('',#3851,#3856,#3858,.T.);+#3856=VERTEX_POINT('',#3857);+#3857=CARTESIAN_POINT('',(-2.51,7.579347141319,0.1));+#3858=LINE('',#3852,#407);+#3859=ORIENTED_EDGE('',*,*,#3860,.T.);+#3860=EDGE_CURVE('',#3856,#3861,#3863,.T.);+#3861=VERTEX_POINT('',#3862);+#3862=CARTESIAN_POINT('',(-2.51,7.480866366018,0.182635182233));+#3863=CIRCLE('',#3864,1.E-01);+#3864=AXIS2_PLACEMENT_3D('',#3843,#2424,#2425);+#3865=ORIENTED_EDGE('',*,*,#3866,.T.);+#3866=EDGE_CURVE('',#3861,#3867,#3869,.T.);+#3867=VERTEX_POINT('',#3868);+#3868=CARTESIAN_POINT('',(-2.51,7.396961550602,0.684729635533));+#3869=LINE('',#3862,#2431);+#3870=ORIENTED_EDGE('',*,*,#3871,.T.);+#3871=EDGE_CURVE('',#3867,#766,#3872,.T.);+#3872=CIRCLE('',#3873,0.2);+#3873=AXIS2_PLACEMENT_3D('',#3831,#14,#2437);+#3874=PLANE('',#3875);+#3875=AXIS2_PLACEMENT_3D('',#3876,#452,#13);+#3876=CARTESIAN_POINT('',(-2.51,7.414276639233,0.410238158856));+#3877=ADVANCED_FACE('',(#3878),#3885,.T.);+#3878=FACE_BOUND('',#3879,.F.);+#3879=EDGE_LOOP('',(#3880,#3870,#3883,#3884));+#3880=ORIENTED_EDGE('',*,*,#3881,.T.);+#3881=EDGE_CURVE('',#3799,#3867,#3882,.T.);+#3882=LINE('',#3800,#451);+#3883=ORIENTED_EDGE('',*,*,#765,.F.);+#3884=ORIENTED_EDGE('',*,*,#3803,.F.);+#3885=CYLINDRICAL_SURFACE('',#3886,0.2);+#3886=AXIS2_PLACEMENT_3D('',#3763,#2386,#2437);+#3887=ADVANCED_FACE('',(#3888),#2365,.F.);+#3888=FACE_BOUND('',#3889,.F.);+#3889=EDGE_LOOP('',(#3813,#3890,#3894,#3898));+#3890=ORIENTED_EDGE('',*,*,#3891,.T.);+#3891=EDGE_CURVE('',#3815,#3892,#2359,.T.);+#3892=VERTEX_POINT('',#3893);+#3893=CARTESIAN_POINT('',(-2.29,7.,0.75));+#3894=ORIENTED_EDGE('',*,*,#3895,.T.);+#3895=EDGE_CURVE('',#3892,#786,#3896,.T.);+#3896=LINE('',#3897,#2043);+#3897=CARTESIAN_POINT('',(-2.29,7.,0.630119079428));+#3898=ORIENTED_EDGE('',*,*,#785,.F.);+#3899=ADVANCED_FACE('',(#3900),#3959,.F.);+#3900=FACE_BOUND('',#3901,.F.);+#3901=EDGE_LOOP('',(#3902,#3903,#3909,#3916,#3921,#3928,#3933,#3938,#3943,#3949,#3954,#3958));+#3902=ORIENTED_EDGE('',*,*,#3895,.F.);+#3903=ORIENTED_EDGE('',*,*,#3904,.T.);+#3904=EDGE_CURVE('',#3892,#3905,#3907,.T.);+#3905=VERTEX_POINT('',#3906);+#3906=CARTESIAN_POINT('',(-2.29,7.2,0.75));+#3907=LINE('',#3908,#2377);+#3908=CARTESIAN_POINT('',(-2.29,6.85,0.75));+#3909=ORIENTED_EDGE('',*,*,#3910,.T.);+#3910=EDGE_CURVE('',#3905,#3911,#3913,.T.);+#3911=VERTEX_POINT('',#3912);+#3912=CARTESIAN_POINT('',(-2.29,7.298480775301,0.667364817767));+#3913=CIRCLE('',#3914,0.1);+#3914=AXIS2_PLACEMENT_3D('',#3915,#2386,#2387);+#3915=CARTESIAN_POINT('',(-2.29,7.2,0.65));+#3916=ORIENTED_EDGE('',*,*,#3917,.T.);+#3917=EDGE_CURVE('',#3911,#3918,#3920,.T.);+#3918=VERTEX_POINT('',#3919);+#3919=CARTESIAN_POINT('',(-2.29,7.382385590716,0.165270364467));+#3920=LINE('',#3912,#2393);+#3921=ORIENTED_EDGE('',*,*,#3922,.T.);+#3922=EDGE_CURVE('',#3918,#3923,#3925,.T.);+#3923=VERTEX_POINT('',#3924);+#3924=CARTESIAN_POINT('',(-2.29,7.579347141319,1.387778780781E-16));+#3925=CIRCLE('',#3926,0.2);+#3926=AXIS2_PLACEMENT_3D('',#3927,#452,#2402);+#3927=CARTESIAN_POINT('',(-2.29,7.579347141319,0.2));+#3928=ORIENTED_EDGE('',*,*,#3929,.T.);+#3929=EDGE_CURVE('',#3923,#3930,#3932,.T.);+#3930=VERTEX_POINT('',#3931);+#3931=CARTESIAN_POINT('',(-2.29,8.,1.387778780781E-16));+#3932=LINE('',#3924,#2377);+#3933=ORIENTED_EDGE('',*,*,#3934,.T.);+#3934=EDGE_CURVE('',#3930,#3935,#3937,.T.);+#3935=VERTEX_POINT('',#3936);+#3936=CARTESIAN_POINT('',(-2.29,8.,0.1));+#3937=LINE('',#3931,#2043);+#3938=ORIENTED_EDGE('',*,*,#3939,.T.);+#3939=EDGE_CURVE('',#3935,#3940,#3942,.T.);+#3940=VERTEX_POINT('',#3941);+#3941=CARTESIAN_POINT('',(-2.29,7.579347141319,0.1));+#3942=LINE('',#3936,#407);+#3943=ORIENTED_EDGE('',*,*,#3944,.T.);+#3944=EDGE_CURVE('',#3940,#3945,#3947,.T.);+#3945=VERTEX_POINT('',#3946);+#3946=CARTESIAN_POINT('',(-2.29,7.480866366018,0.182635182233));+#3947=CIRCLE('',#3948,1.E-01);+#3948=AXIS2_PLACEMENT_3D('',#3927,#2424,#2425);+#3949=ORIENTED_EDGE('',*,*,#3950,.T.);+#3950=EDGE_CURVE('',#3945,#3951,#3953,.T.);+#3951=VERTEX_POINT('',#3952);+#3952=CARTESIAN_POINT('',(-2.29,7.396961550602,0.684729635533));+#3953=LINE('',#3946,#2431);+#3954=ORIENTED_EDGE('',*,*,#3955,.T.);+#3955=EDGE_CURVE('',#3951,#798,#3956,.T.);+#3956=CIRCLE('',#3957,0.2);+#3957=AXIS2_PLACEMENT_3D('',#3915,#14,#2437);+#3958=ORIENTED_EDGE('',*,*,#797,.T.);+#3959=PLANE('',#3960);+#3960=AXIS2_PLACEMENT_3D('',#3961,#452,#13);+#3961=CARTESIAN_POINT('',(-2.29,7.414276639233,0.410238158856));+#3962=ADVANCED_FACE('',(#3963),#4026,.T.);+#3963=FACE_BOUND('',#3964,.T.);+#3964=EDGE_LOOP('',(#3965,#3971,#3977,#3984,#3989,#3996,#4001,#4006,#4011,#4017,#4022,#804));+#3965=ORIENTED_EDGE('',*,*,#3966,.F.);+#3966=EDGE_CURVE('',#3967,#806,#3969,.T.);+#3967=VERTEX_POINT('',#3968);+#3968=CARTESIAN_POINT('',(-2.11,7.,0.75));+#3969=LINE('',#3970,#2043);+#3970=CARTESIAN_POINT('',(-2.11,7.,0.630119079428));+#3971=ORIENTED_EDGE('',*,*,#3972,.T.);+#3972=EDGE_CURVE('',#3967,#3973,#3975,.T.);+#3973=VERTEX_POINT('',#3974);+#3974=CARTESIAN_POINT('',(-2.11,7.2,0.75));+#3975=LINE('',#3976,#2377);+#3976=CARTESIAN_POINT('',(-2.11,6.85,0.75));+#3977=ORIENTED_EDGE('',*,*,#3978,.T.);+#3978=EDGE_CURVE('',#3973,#3979,#3981,.T.);+#3979=VERTEX_POINT('',#3980);+#3980=CARTESIAN_POINT('',(-2.11,7.298480775301,0.667364817767));+#3981=CIRCLE('',#3982,0.1);+#3982=AXIS2_PLACEMENT_3D('',#3983,#2386,#2387);+#3983=CARTESIAN_POINT('',(-2.11,7.2,0.65));+#3984=ORIENTED_EDGE('',*,*,#3985,.T.);+#3985=EDGE_CURVE('',#3979,#3986,#3988,.T.);+#3986=VERTEX_POINT('',#3987);+#3987=CARTESIAN_POINT('',(-2.11,7.382385590716,0.165270364467));+#3988=LINE('',#3980,#2393);+#3989=ORIENTED_EDGE('',*,*,#3990,.T.);+#3990=EDGE_CURVE('',#3986,#3991,#3993,.T.);+#3991=VERTEX_POINT('',#3992);+#3992=CARTESIAN_POINT('',(-2.11,7.579347141319,1.387778780781E-16));+#3993=CIRCLE('',#3994,0.2);+#3994=AXIS2_PLACEMENT_3D('',#3995,#452,#2402);+#3995=CARTESIAN_POINT('',(-2.11,7.579347141319,0.2));+#3996=ORIENTED_EDGE('',*,*,#3997,.T.);+#3997=EDGE_CURVE('',#3991,#3998,#4000,.T.);+#3998=VERTEX_POINT('',#3999);+#3999=CARTESIAN_POINT('',(-2.11,8.,1.387778780781E-16));+#4000=LINE('',#3992,#2377);+#4001=ORIENTED_EDGE('',*,*,#4002,.T.);+#4002=EDGE_CURVE('',#3998,#4003,#4005,.T.);+#4003=VERTEX_POINT('',#4004);+#4004=CARTESIAN_POINT('',(-2.11,8.,0.1));+#4005=LINE('',#3999,#2043);+#4006=ORIENTED_EDGE('',*,*,#4007,.T.);+#4007=EDGE_CURVE('',#4003,#4008,#4010,.T.);+#4008=VERTEX_POINT('',#4009);+#4009=CARTESIAN_POINT('',(-2.11,7.579347141319,0.1));+#4010=LINE('',#4004,#407);+#4011=ORIENTED_EDGE('',*,*,#4012,.T.);+#4012=EDGE_CURVE('',#4008,#4013,#4015,.T.);+#4013=VERTEX_POINT('',#4014);+#4014=CARTESIAN_POINT('',(-2.11,7.480866366018,0.182635182233));+#4015=CIRCLE('',#4016,1.E-01);+#4016=AXIS2_PLACEMENT_3D('',#3995,#2424,#2425);+#4017=ORIENTED_EDGE('',*,*,#4018,.T.);+#4018=EDGE_CURVE('',#4013,#4019,#4021,.T.);+#4019=VERTEX_POINT('',#4020);+#4020=CARTESIAN_POINT('',(-2.11,7.396961550602,0.684729635533));+#4021=LINE('',#4014,#2431);+#4022=ORIENTED_EDGE('',*,*,#4023,.T.);+#4023=EDGE_CURVE('',#4019,#801,#4024,.T.);+#4024=CIRCLE('',#4025,0.2);+#4025=AXIS2_PLACEMENT_3D('',#3983,#14,#2437);+#4026=PLANE('',#4027);+#4027=AXIS2_PLACEMENT_3D('',#4028,#452,#13);+#4028=CARTESIAN_POINT('',(-2.11,7.414276639233,0.410238158856));+#4029=ADVANCED_FACE('',(#4030),#4037,.T.);+#4030=FACE_BOUND('',#4031,.F.);+#4031=EDGE_LOOP('',(#4032,#4022,#4035,#4036));+#4032=ORIENTED_EDGE('',*,*,#4033,.T.);+#4033=EDGE_CURVE('',#3951,#4019,#4034,.T.);+#4034=LINE('',#3952,#451);+#4035=ORIENTED_EDGE('',*,*,#800,.F.);+#4036=ORIENTED_EDGE('',*,*,#3955,.F.);+#4037=CYLINDRICAL_SURFACE('',#4038,0.2);+#4038=AXIS2_PLACEMENT_3D('',#3915,#2386,#2437);+#4039=ADVANCED_FACE('',(#4040),#2365,.F.);+#4040=FACE_BOUND('',#4041,.F.);+#4041=EDGE_LOOP('',(#3965,#4042,#4046,#4050));+#4042=ORIENTED_EDGE('',*,*,#4043,.T.);+#4043=EDGE_CURVE('',#3967,#4044,#2359,.T.);+#4044=VERTEX_POINT('',#4045);+#4045=CARTESIAN_POINT('',(-1.89,7.,0.75));+#4046=ORIENTED_EDGE('',*,*,#4047,.T.);+#4047=EDGE_CURVE('',#4044,#821,#4048,.T.);+#4048=LINE('',#4049,#2043);+#4049=CARTESIAN_POINT('',(-1.89,7.,0.630119079428));+#4050=ORIENTED_EDGE('',*,*,#820,.F.);+#4051=ADVANCED_FACE('',(#4052),#4111,.F.);+#4052=FACE_BOUND('',#4053,.F.);+#4053=EDGE_LOOP('',(#4054,#4055,#4061,#4068,#4073,#4080,#4085,#4090,#4095,#4101,#4106,#4110));+#4054=ORIENTED_EDGE('',*,*,#4047,.F.);+#4055=ORIENTED_EDGE('',*,*,#4056,.T.);+#4056=EDGE_CURVE('',#4044,#4057,#4059,.T.);+#4057=VERTEX_POINT('',#4058);+#4058=CARTESIAN_POINT('',(-1.89,7.2,0.75));+#4059=LINE('',#4060,#2377);+#4060=CARTESIAN_POINT('',(-1.89,6.85,0.75));+#4061=ORIENTED_EDGE('',*,*,#4062,.T.);+#4062=EDGE_CURVE('',#4057,#4063,#4065,.T.);+#4063=VERTEX_POINT('',#4064);+#4064=CARTESIAN_POINT('',(-1.89,7.298480775301,0.667364817767));+#4065=CIRCLE('',#4066,0.1);+#4066=AXIS2_PLACEMENT_3D('',#4067,#2386,#2387);+#4067=CARTESIAN_POINT('',(-1.89,7.2,0.65));+#4068=ORIENTED_EDGE('',*,*,#4069,.T.);+#4069=EDGE_CURVE('',#4063,#4070,#4072,.T.);+#4070=VERTEX_POINT('',#4071);+#4071=CARTESIAN_POINT('',(-1.89,7.382385590716,0.165270364467));+#4072=LINE('',#4064,#2393);+#4073=ORIENTED_EDGE('',*,*,#4074,.T.);+#4074=EDGE_CURVE('',#4070,#4075,#4077,.T.);+#4075=VERTEX_POINT('',#4076);+#4076=CARTESIAN_POINT('',(-1.89,7.579347141319,1.387778780781E-16));+#4077=CIRCLE('',#4078,0.2);+#4078=AXIS2_PLACEMENT_3D('',#4079,#452,#2402);+#4079=CARTESIAN_POINT('',(-1.89,7.579347141319,0.2));+#4080=ORIENTED_EDGE('',*,*,#4081,.T.);+#4081=EDGE_CURVE('',#4075,#4082,#4084,.T.);+#4082=VERTEX_POINT('',#4083);+#4083=CARTESIAN_POINT('',(-1.89,8.,1.387778780781E-16));+#4084=LINE('',#4076,#2377);+#4085=ORIENTED_EDGE('',*,*,#4086,.T.);+#4086=EDGE_CURVE('',#4082,#4087,#4089,.T.);+#4087=VERTEX_POINT('',#4088);+#4088=CARTESIAN_POINT('',(-1.89,8.,0.1));+#4089=LINE('',#4083,#2043);+#4090=ORIENTED_EDGE('',*,*,#4091,.T.);+#4091=EDGE_CURVE('',#4087,#4092,#4094,.T.);+#4092=VERTEX_POINT('',#4093);+#4093=CARTESIAN_POINT('',(-1.89,7.579347141319,0.1));+#4094=LINE('',#4088,#407);+#4095=ORIENTED_EDGE('',*,*,#4096,.T.);+#4096=EDGE_CURVE('',#4092,#4097,#4099,.T.);+#4097=VERTEX_POINT('',#4098);+#4098=CARTESIAN_POINT('',(-1.89,7.480866366018,0.182635182233));+#4099=CIRCLE('',#4100,1.E-01);+#4100=AXIS2_PLACEMENT_3D('',#4079,#2424,#2425);+#4101=ORIENTED_EDGE('',*,*,#4102,.T.);+#4102=EDGE_CURVE('',#4097,#4103,#4105,.T.);+#4103=VERTEX_POINT('',#4104);+#4104=CARTESIAN_POINT('',(-1.89,7.396961550602,0.684729635533));+#4105=LINE('',#4098,#2431);+#4106=ORIENTED_EDGE('',*,*,#4107,.T.);+#4107=EDGE_CURVE('',#4103,#833,#4108,.T.);+#4108=CIRCLE('',#4109,0.2);+#4109=AXIS2_PLACEMENT_3D('',#4067,#14,#2437);+#4110=ORIENTED_EDGE('',*,*,#832,.T.);+#4111=PLANE('',#4112);+#4112=AXIS2_PLACEMENT_3D('',#4113,#452,#13);+#4113=CARTESIAN_POINT('',(-1.89,7.414276639233,0.410238158856));+#4114=ADVANCED_FACE('',(#4115),#4178,.T.);+#4115=FACE_BOUND('',#4116,.T.);+#4116=EDGE_LOOP('',(#4117,#4123,#4129,#4136,#4141,#4148,#4153,#4158,#4163,#4169,#4174,#839));+#4117=ORIENTED_EDGE('',*,*,#4118,.F.);+#4118=EDGE_CURVE('',#4119,#841,#4121,.T.);+#4119=VERTEX_POINT('',#4120);+#4120=CARTESIAN_POINT('',(-1.71,7.,0.75));+#4121=LINE('',#4122,#2043);+#4122=CARTESIAN_POINT('',(-1.71,7.,0.630119079428));+#4123=ORIENTED_EDGE('',*,*,#4124,.T.);+#4124=EDGE_CURVE('',#4119,#4125,#4127,.T.);+#4125=VERTEX_POINT('',#4126);+#4126=CARTESIAN_POINT('',(-1.71,7.2,0.75));+#4127=LINE('',#4128,#2377);+#4128=CARTESIAN_POINT('',(-1.71,6.85,0.75));+#4129=ORIENTED_EDGE('',*,*,#4130,.T.);+#4130=EDGE_CURVE('',#4125,#4131,#4133,.T.);+#4131=VERTEX_POINT('',#4132);+#4132=CARTESIAN_POINT('',(-1.71,7.298480775301,0.667364817767));+#4133=CIRCLE('',#4134,0.1);+#4134=AXIS2_PLACEMENT_3D('',#4135,#2386,#2387);+#4135=CARTESIAN_POINT('',(-1.71,7.2,0.65));+#4136=ORIENTED_EDGE('',*,*,#4137,.T.);+#4137=EDGE_CURVE('',#4131,#4138,#4140,.T.);+#4138=VERTEX_POINT('',#4139);+#4139=CARTESIAN_POINT('',(-1.71,7.382385590716,0.165270364467));+#4140=LINE('',#4132,#2393);+#4141=ORIENTED_EDGE('',*,*,#4142,.T.);+#4142=EDGE_CURVE('',#4138,#4143,#4145,.T.);+#4143=VERTEX_POINT('',#4144);+#4144=CARTESIAN_POINT('',(-1.71,7.579347141319,1.387778780781E-16));+#4145=CIRCLE('',#4146,0.2);+#4146=AXIS2_PLACEMENT_3D('',#4147,#452,#2402);+#4147=CARTESIAN_POINT('',(-1.71,7.579347141319,0.2));+#4148=ORIENTED_EDGE('',*,*,#4149,.T.);+#4149=EDGE_CURVE('',#4143,#4150,#4152,.T.);+#4150=VERTEX_POINT('',#4151);+#4151=CARTESIAN_POINT('',(-1.71,8.,1.387778780781E-16));+#4152=LINE('',#4144,#2377);+#4153=ORIENTED_EDGE('',*,*,#4154,.T.);+#4154=EDGE_CURVE('',#4150,#4155,#4157,.T.);+#4155=VERTEX_POINT('',#4156);+#4156=CARTESIAN_POINT('',(-1.71,8.,0.1));+#4157=LINE('',#4151,#2043);+#4158=ORIENTED_EDGE('',*,*,#4159,.T.);+#4159=EDGE_CURVE('',#4155,#4160,#4162,.T.);+#4160=VERTEX_POINT('',#4161);+#4161=CARTESIAN_POINT('',(-1.71,7.579347141319,0.1));+#4162=LINE('',#4156,#407);+#4163=ORIENTED_EDGE('',*,*,#4164,.T.);+#4164=EDGE_CURVE('',#4160,#4165,#4167,.T.);+#4165=VERTEX_POINT('',#4166);+#4166=CARTESIAN_POINT('',(-1.71,7.480866366018,0.182635182233));+#4167=CIRCLE('',#4168,1.E-01);+#4168=AXIS2_PLACEMENT_3D('',#4147,#2424,#2425);+#4169=ORIENTED_EDGE('',*,*,#4170,.T.);+#4170=EDGE_CURVE('',#4165,#4171,#4173,.T.);+#4171=VERTEX_POINT('',#4172);+#4172=CARTESIAN_POINT('',(-1.71,7.396961550602,0.684729635533));+#4173=LINE('',#4166,#2431);+#4174=ORIENTED_EDGE('',*,*,#4175,.T.);+#4175=EDGE_CURVE('',#4171,#836,#4176,.T.);+#4176=CIRCLE('',#4177,0.2);+#4177=AXIS2_PLACEMENT_3D('',#4135,#14,#2437);+#4178=PLANE('',#4179);+#4179=AXIS2_PLACEMENT_3D('',#4180,#452,#13);+#4180=CARTESIAN_POINT('',(-1.71,7.414276639233,0.410238158856));+#4181=ADVANCED_FACE('',(#4182),#4189,.T.);+#4182=FACE_BOUND('',#4183,.F.);+#4183=EDGE_LOOP('',(#4184,#4174,#4187,#4188));+#4184=ORIENTED_EDGE('',*,*,#4185,.T.);+#4185=EDGE_CURVE('',#4103,#4171,#4186,.T.);+#4186=LINE('',#4104,#451);+#4187=ORIENTED_EDGE('',*,*,#835,.F.);+#4188=ORIENTED_EDGE('',*,*,#4107,.F.);+#4189=CYLINDRICAL_SURFACE('',#4190,0.2);+#4190=AXIS2_PLACEMENT_3D('',#4067,#2386,#2437);+#4191=ADVANCED_FACE('',(#4192),#2365,.F.);+#4192=FACE_BOUND('',#4193,.F.);+#4193=EDGE_LOOP('',(#4117,#4194,#4198,#4202));+#4194=ORIENTED_EDGE('',*,*,#4195,.T.);+#4195=EDGE_CURVE('',#4119,#4196,#2359,.T.);+#4196=VERTEX_POINT('',#4197);+#4197=CARTESIAN_POINT('',(-1.49,7.,0.75));+#4198=ORIENTED_EDGE('',*,*,#4199,.T.);+#4199=EDGE_CURVE('',#4196,#856,#4200,.T.);+#4200=LINE('',#4201,#2043);+#4201=CARTESIAN_POINT('',(-1.49,7.,0.630119079428));+#4202=ORIENTED_EDGE('',*,*,#855,.F.);+#4203=ADVANCED_FACE('',(#4204),#4263,.F.);+#4204=FACE_BOUND('',#4205,.F.);+#4205=EDGE_LOOP('',(#4206,#4207,#4213,#4220,#4225,#4232,#4237,#4242,#4247,#4253,#4258,#4262));+#4206=ORIENTED_EDGE('',*,*,#4199,.F.);+#4207=ORIENTED_EDGE('',*,*,#4208,.T.);+#4208=EDGE_CURVE('',#4196,#4209,#4211,.T.);+#4209=VERTEX_POINT('',#4210);+#4210=CARTESIAN_POINT('',(-1.49,7.2,0.75));+#4211=LINE('',#4212,#2377);+#4212=CARTESIAN_POINT('',(-1.49,6.85,0.75));+#4213=ORIENTED_EDGE('',*,*,#4214,.T.);+#4214=EDGE_CURVE('',#4209,#4215,#4217,.T.);+#4215=VERTEX_POINT('',#4216);+#4216=CARTESIAN_POINT('',(-1.49,7.298480775301,0.667364817767));+#4217=CIRCLE('',#4218,0.1);+#4218=AXIS2_PLACEMENT_3D('',#4219,#2386,#2387);+#4219=CARTESIAN_POINT('',(-1.49,7.2,0.65));+#4220=ORIENTED_EDGE('',*,*,#4221,.T.);+#4221=EDGE_CURVE('',#4215,#4222,#4224,.T.);+#4222=VERTEX_POINT('',#4223);+#4223=CARTESIAN_POINT('',(-1.49,7.382385590716,0.165270364467));+#4224=LINE('',#4216,#2393);+#4225=ORIENTED_EDGE('',*,*,#4226,.T.);+#4226=EDGE_CURVE('',#4222,#4227,#4229,.T.);+#4227=VERTEX_POINT('',#4228);+#4228=CARTESIAN_POINT('',(-1.49,7.579347141319,1.387778780781E-16));+#4229=CIRCLE('',#4230,0.2);+#4230=AXIS2_PLACEMENT_3D('',#4231,#452,#2402);+#4231=CARTESIAN_POINT('',(-1.49,7.579347141319,0.2));+#4232=ORIENTED_EDGE('',*,*,#4233,.T.);+#4233=EDGE_CURVE('',#4227,#4234,#4236,.T.);+#4234=VERTEX_POINT('',#4235);+#4235=CARTESIAN_POINT('',(-1.49,8.,1.387778780781E-16));+#4236=LINE('',#4228,#2377);+#4237=ORIENTED_EDGE('',*,*,#4238,.T.);+#4238=EDGE_CURVE('',#4234,#4239,#4241,.T.);+#4239=VERTEX_POINT('',#4240);+#4240=CARTESIAN_POINT('',(-1.49,8.,0.1));+#4241=LINE('',#4235,#2043);+#4242=ORIENTED_EDGE('',*,*,#4243,.T.);+#4243=EDGE_CURVE('',#4239,#4244,#4246,.T.);+#4244=VERTEX_POINT('',#4245);+#4245=CARTESIAN_POINT('',(-1.49,7.579347141319,0.1));+#4246=LINE('',#4240,#407);+#4247=ORIENTED_EDGE('',*,*,#4248,.T.);+#4248=EDGE_CURVE('',#4244,#4249,#4251,.T.);+#4249=VERTEX_POINT('',#4250);+#4250=CARTESIAN_POINT('',(-1.49,7.480866366018,0.182635182233));+#4251=CIRCLE('',#4252,1.E-01);+#4252=AXIS2_PLACEMENT_3D('',#4231,#2424,#2425);+#4253=ORIENTED_EDGE('',*,*,#4254,.T.);+#4254=EDGE_CURVE('',#4249,#4255,#4257,.T.);+#4255=VERTEX_POINT('',#4256);+#4256=CARTESIAN_POINT('',(-1.49,7.396961550602,0.684729635533));+#4257=LINE('',#4250,#2431);+#4258=ORIENTED_EDGE('',*,*,#4259,.T.);+#4259=EDGE_CURVE('',#4255,#868,#4260,.T.);+#4260=CIRCLE('',#4261,0.2);+#4261=AXIS2_PLACEMENT_3D('',#4219,#14,#2437);+#4262=ORIENTED_EDGE('',*,*,#867,.T.);+#4263=PLANE('',#4264);+#4264=AXIS2_PLACEMENT_3D('',#4265,#452,#13);+#4265=CARTESIAN_POINT('',(-1.49,7.414276639233,0.410238158856));+#4266=ADVANCED_FACE('',(#4267),#4330,.T.);+#4267=FACE_BOUND('',#4268,.T.);+#4268=EDGE_LOOP('',(#4269,#4275,#4281,#4288,#4293,#4300,#4305,#4310,#4315,#4321,#4326,#874));+#4269=ORIENTED_EDGE('',*,*,#4270,.F.);+#4270=EDGE_CURVE('',#4271,#876,#4273,.T.);+#4271=VERTEX_POINT('',#4272);+#4272=CARTESIAN_POINT('',(-1.31,7.,0.75));+#4273=LINE('',#4274,#2043);+#4274=CARTESIAN_POINT('',(-1.31,7.,0.630119079428));+#4275=ORIENTED_EDGE('',*,*,#4276,.T.);+#4276=EDGE_CURVE('',#4271,#4277,#4279,.T.);+#4277=VERTEX_POINT('',#4278);+#4278=CARTESIAN_POINT('',(-1.31,7.2,0.75));+#4279=LINE('',#4280,#2377);+#4280=CARTESIAN_POINT('',(-1.31,6.85,0.75));+#4281=ORIENTED_EDGE('',*,*,#4282,.T.);+#4282=EDGE_CURVE('',#4277,#4283,#4285,.T.);+#4283=VERTEX_POINT('',#4284);+#4284=CARTESIAN_POINT('',(-1.31,7.298480775301,0.667364817767));+#4285=CIRCLE('',#4286,0.1);+#4286=AXIS2_PLACEMENT_3D('',#4287,#2386,#2387);+#4287=CARTESIAN_POINT('',(-1.31,7.2,0.65));+#4288=ORIENTED_EDGE('',*,*,#4289,.T.);+#4289=EDGE_CURVE('',#4283,#4290,#4292,.T.);+#4290=VERTEX_POINT('',#4291);+#4291=CARTESIAN_POINT('',(-1.31,7.382385590716,0.165270364467));+#4292=LINE('',#4284,#2393);+#4293=ORIENTED_EDGE('',*,*,#4294,.T.);+#4294=EDGE_CURVE('',#4290,#4295,#4297,.T.);+#4295=VERTEX_POINT('',#4296);+#4296=CARTESIAN_POINT('',(-1.31,7.579347141319,1.387778780781E-16));+#4297=CIRCLE('',#4298,0.2);+#4298=AXIS2_PLACEMENT_3D('',#4299,#452,#2402);+#4299=CARTESIAN_POINT('',(-1.31,7.579347141319,0.2));+#4300=ORIENTED_EDGE('',*,*,#4301,.T.);+#4301=EDGE_CURVE('',#4295,#4302,#4304,.T.);+#4302=VERTEX_POINT('',#4303);+#4303=CARTESIAN_POINT('',(-1.31,8.,1.387778780781E-16));+#4304=LINE('',#4296,#2377);+#4305=ORIENTED_EDGE('',*,*,#4306,.T.);+#4306=EDGE_CURVE('',#4302,#4307,#4309,.T.);+#4307=VERTEX_POINT('',#4308);+#4308=CARTESIAN_POINT('',(-1.31,8.,0.1));+#4309=LINE('',#4303,#2043);+#4310=ORIENTED_EDGE('',*,*,#4311,.T.);+#4311=EDGE_CURVE('',#4307,#4312,#4314,.T.);+#4312=VERTEX_POINT('',#4313);+#4313=CARTESIAN_POINT('',(-1.31,7.579347141319,0.1));+#4314=LINE('',#4308,#407);+#4315=ORIENTED_EDGE('',*,*,#4316,.T.);+#4316=EDGE_CURVE('',#4312,#4317,#4319,.T.);+#4317=VERTEX_POINT('',#4318);+#4318=CARTESIAN_POINT('',(-1.31,7.480866366018,0.182635182233));+#4319=CIRCLE('',#4320,1.E-01);+#4320=AXIS2_PLACEMENT_3D('',#4299,#2424,#2425);+#4321=ORIENTED_EDGE('',*,*,#4322,.T.);+#4322=EDGE_CURVE('',#4317,#4323,#4325,.T.);+#4323=VERTEX_POINT('',#4324);+#4324=CARTESIAN_POINT('',(-1.31,7.396961550602,0.684729635533));+#4325=LINE('',#4318,#2431);+#4326=ORIENTED_EDGE('',*,*,#4327,.T.);+#4327=EDGE_CURVE('',#4323,#871,#4328,.T.);+#4328=CIRCLE('',#4329,0.2);+#4329=AXIS2_PLACEMENT_3D('',#4287,#14,#2437);+#4330=PLANE('',#4331);+#4331=AXIS2_PLACEMENT_3D('',#4332,#452,#13);+#4332=CARTESIAN_POINT('',(-1.31,7.414276639233,0.410238158856));+#4333=ADVANCED_FACE('',(#4334),#4341,.T.);+#4334=FACE_BOUND('',#4335,.F.);+#4335=EDGE_LOOP('',(#4336,#4326,#4339,#4340));+#4336=ORIENTED_EDGE('',*,*,#4337,.T.);+#4337=EDGE_CURVE('',#4255,#4323,#4338,.T.);+#4338=LINE('',#4256,#451);+#4339=ORIENTED_EDGE('',*,*,#870,.F.);+#4340=ORIENTED_EDGE('',*,*,#4259,.F.);+#4341=CYLINDRICAL_SURFACE('',#4342,0.2);+#4342=AXIS2_PLACEMENT_3D('',#4219,#2386,#2437);+#4343=ADVANCED_FACE('',(#4344),#2365,.F.);+#4344=FACE_BOUND('',#4345,.F.);+#4345=EDGE_LOOP('',(#4269,#4346,#4350,#4354));+#4346=ORIENTED_EDGE('',*,*,#4347,.T.);+#4347=EDGE_CURVE('',#4271,#4348,#2359,.T.);+#4348=VERTEX_POINT('',#4349);+#4349=CARTESIAN_POINT('',(-1.09,7.,0.75));+#4350=ORIENTED_EDGE('',*,*,#4351,.T.);+#4351=EDGE_CURVE('',#4348,#891,#4352,.T.);+#4352=LINE('',#4353,#2043);+#4353=CARTESIAN_POINT('',(-1.09,7.,0.630119079428));+#4354=ORIENTED_EDGE('',*,*,#890,.F.);+#4355=ADVANCED_FACE('',(#4356),#4415,.F.);+#4356=FACE_BOUND('',#4357,.F.);+#4357=EDGE_LOOP('',(#4358,#4359,#4365,#4372,#4377,#4384,#4389,#4394,#4399,#4405,#4410,#4414));+#4358=ORIENTED_EDGE('',*,*,#4351,.F.);+#4359=ORIENTED_EDGE('',*,*,#4360,.T.);+#4360=EDGE_CURVE('',#4348,#4361,#4363,.T.);+#4361=VERTEX_POINT('',#4362);+#4362=CARTESIAN_POINT('',(-1.09,7.2,0.75));+#4363=LINE('',#4364,#2377);+#4364=CARTESIAN_POINT('',(-1.09,6.85,0.75));+#4365=ORIENTED_EDGE('',*,*,#4366,.T.);+#4366=EDGE_CURVE('',#4361,#4367,#4369,.T.);+#4367=VERTEX_POINT('',#4368);+#4368=CARTESIAN_POINT('',(-1.09,7.298480775301,0.667364817767));+#4369=CIRCLE('',#4370,0.1);+#4370=AXIS2_PLACEMENT_3D('',#4371,#2386,#2387);+#4371=CARTESIAN_POINT('',(-1.09,7.2,0.65));+#4372=ORIENTED_EDGE('',*,*,#4373,.T.);+#4373=EDGE_CURVE('',#4367,#4374,#4376,.T.);+#4374=VERTEX_POINT('',#4375);+#4375=CARTESIAN_POINT('',(-1.09,7.382385590716,0.165270364467));+#4376=LINE('',#4368,#2393);+#4377=ORIENTED_EDGE('',*,*,#4378,.T.);+#4378=EDGE_CURVE('',#4374,#4379,#4381,.T.);+#4379=VERTEX_POINT('',#4380);+#4380=CARTESIAN_POINT('',(-1.09,7.579347141319,1.387778780781E-16));+#4381=CIRCLE('',#4382,0.2);+#4382=AXIS2_PLACEMENT_3D('',#4383,#452,#2402);+#4383=CARTESIAN_POINT('',(-1.09,7.579347141319,0.2));+#4384=ORIENTED_EDGE('',*,*,#4385,.T.);+#4385=EDGE_CURVE('',#4379,#4386,#4388,.T.);+#4386=VERTEX_POINT('',#4387);+#4387=CARTESIAN_POINT('',(-1.09,8.,1.387778780781E-16));+#4388=LINE('',#4380,#2377);+#4389=ORIENTED_EDGE('',*,*,#4390,.T.);+#4390=EDGE_CURVE('',#4386,#4391,#4393,.T.);+#4391=VERTEX_POINT('',#4392);+#4392=CARTESIAN_POINT('',(-1.09,8.,0.1));+#4393=LINE('',#4387,#2043);+#4394=ORIENTED_EDGE('',*,*,#4395,.T.);+#4395=EDGE_CURVE('',#4391,#4396,#4398,.T.);+#4396=VERTEX_POINT('',#4397);+#4397=CARTESIAN_POINT('',(-1.09,7.579347141319,0.1));+#4398=LINE('',#4392,#407);+#4399=ORIENTED_EDGE('',*,*,#4400,.T.);+#4400=EDGE_CURVE('',#4396,#4401,#4403,.T.);+#4401=VERTEX_POINT('',#4402);+#4402=CARTESIAN_POINT('',(-1.09,7.480866366018,0.182635182233));+#4403=CIRCLE('',#4404,1.E-01);+#4404=AXIS2_PLACEMENT_3D('',#4383,#2424,#2425);+#4405=ORIENTED_EDGE('',*,*,#4406,.T.);+#4406=EDGE_CURVE('',#4401,#4407,#4409,.T.);+#4407=VERTEX_POINT('',#4408);+#4408=CARTESIAN_POINT('',(-1.09,7.396961550602,0.684729635533));+#4409=LINE('',#4402,#2431);+#4410=ORIENTED_EDGE('',*,*,#4411,.T.);+#4411=EDGE_CURVE('',#4407,#903,#4412,.T.);+#4412=CIRCLE('',#4413,0.2);+#4413=AXIS2_PLACEMENT_3D('',#4371,#14,#2437);+#4414=ORIENTED_EDGE('',*,*,#902,.T.);+#4415=PLANE('',#4416);+#4416=AXIS2_PLACEMENT_3D('',#4417,#452,#13);+#4417=CARTESIAN_POINT('',(-1.09,7.414276639233,0.410238158856));+#4418=ADVANCED_FACE('',(#4419),#4482,.T.);+#4419=FACE_BOUND('',#4420,.T.);+#4420=EDGE_LOOP('',(#4421,#4427,#4433,#4440,#4445,#4452,#4457,#4462,#4467,#4473,#4478,#909));+#4421=ORIENTED_EDGE('',*,*,#4422,.F.);+#4422=EDGE_CURVE('',#4423,#911,#4425,.T.);+#4423=VERTEX_POINT('',#4424);+#4424=CARTESIAN_POINT('',(-0.91,7.,0.75));+#4425=LINE('',#4426,#2043);+#4426=CARTESIAN_POINT('',(-0.91,7.,0.630119079428));+#4427=ORIENTED_EDGE('',*,*,#4428,.T.);+#4428=EDGE_CURVE('',#4423,#4429,#4431,.T.);+#4429=VERTEX_POINT('',#4430);+#4430=CARTESIAN_POINT('',(-0.91,7.2,0.75));+#4431=LINE('',#4432,#2377);+#4432=CARTESIAN_POINT('',(-0.91,6.85,0.75));+#4433=ORIENTED_EDGE('',*,*,#4434,.T.);+#4434=EDGE_CURVE('',#4429,#4435,#4437,.T.);+#4435=VERTEX_POINT('',#4436);+#4436=CARTESIAN_POINT('',(-0.91,7.298480775301,0.667364817767));+#4437=CIRCLE('',#4438,0.1);+#4438=AXIS2_PLACEMENT_3D('',#4439,#2386,#2387);+#4439=CARTESIAN_POINT('',(-0.91,7.2,0.65));+#4440=ORIENTED_EDGE('',*,*,#4441,.T.);+#4441=EDGE_CURVE('',#4435,#4442,#4444,.T.);+#4442=VERTEX_POINT('',#4443);+#4443=CARTESIAN_POINT('',(-0.91,7.382385590716,0.165270364467));+#4444=LINE('',#4436,#2393);+#4445=ORIENTED_EDGE('',*,*,#4446,.T.);+#4446=EDGE_CURVE('',#4442,#4447,#4449,.T.);+#4447=VERTEX_POINT('',#4448);+#4448=CARTESIAN_POINT('',(-0.91,7.579347141319,1.387778780781E-16));+#4449=CIRCLE('',#4450,0.2);+#4450=AXIS2_PLACEMENT_3D('',#4451,#452,#2402);+#4451=CARTESIAN_POINT('',(-0.91,7.579347141319,0.2));+#4452=ORIENTED_EDGE('',*,*,#4453,.T.);+#4453=EDGE_CURVE('',#4447,#4454,#4456,.T.);+#4454=VERTEX_POINT('',#4455);+#4455=CARTESIAN_POINT('',(-0.91,8.,1.387778780781E-16));+#4456=LINE('',#4448,#2377);+#4457=ORIENTED_EDGE('',*,*,#4458,.T.);+#4458=EDGE_CURVE('',#4454,#4459,#4461,.T.);+#4459=VERTEX_POINT('',#4460);+#4460=CARTESIAN_POINT('',(-0.91,8.,0.1));+#4461=LINE('',#4455,#2043);+#4462=ORIENTED_EDGE('',*,*,#4463,.T.);+#4463=EDGE_CURVE('',#4459,#4464,#4466,.T.);+#4464=VERTEX_POINT('',#4465);+#4465=CARTESIAN_POINT('',(-0.91,7.579347141319,0.1));+#4466=LINE('',#4460,#407);+#4467=ORIENTED_EDGE('',*,*,#4468,.T.);+#4468=EDGE_CURVE('',#4464,#4469,#4471,.T.);+#4469=VERTEX_POINT('',#4470);+#4470=CARTESIAN_POINT('',(-0.91,7.480866366018,0.182635182233));+#4471=CIRCLE('',#4472,1.E-01);+#4472=AXIS2_PLACEMENT_3D('',#4451,#2424,#2425);+#4473=ORIENTED_EDGE('',*,*,#4474,.T.);+#4474=EDGE_CURVE('',#4469,#4475,#4477,.T.);+#4475=VERTEX_POINT('',#4476);+#4476=CARTESIAN_POINT('',(-0.91,7.396961550602,0.684729635533));+#4477=LINE('',#4470,#2431);+#4478=ORIENTED_EDGE('',*,*,#4479,.T.);+#4479=EDGE_CURVE('',#4475,#906,#4480,.T.);+#4480=CIRCLE('',#4481,0.2);+#4481=AXIS2_PLACEMENT_3D('',#4439,#14,#2437);+#4482=PLANE('',#4483);+#4483=AXIS2_PLACEMENT_3D('',#4484,#452,#13);+#4484=CARTESIAN_POINT('',(-0.91,7.414276639233,0.410238158856));+#4485=ADVANCED_FACE('',(#4486),#4493,.T.);+#4486=FACE_BOUND('',#4487,.F.);+#4487=EDGE_LOOP('',(#4488,#4478,#4491,#4492));+#4488=ORIENTED_EDGE('',*,*,#4489,.T.);+#4489=EDGE_CURVE('',#4407,#4475,#4490,.T.);+#4490=LINE('',#4408,#451);+#4491=ORIENTED_EDGE('',*,*,#905,.F.);+#4492=ORIENTED_EDGE('',*,*,#4411,.F.);+#4493=CYLINDRICAL_SURFACE('',#4494,0.2);+#4494=AXIS2_PLACEMENT_3D('',#4371,#2386,#2437);+#4495=ADVANCED_FACE('',(#4496),#2365,.F.);+#4496=FACE_BOUND('',#4497,.F.);+#4497=EDGE_LOOP('',(#4421,#4498,#4502,#4506));+#4498=ORIENTED_EDGE('',*,*,#4499,.T.);+#4499=EDGE_CURVE('',#4423,#4500,#2359,.T.);+#4500=VERTEX_POINT('',#4501);+#4501=CARTESIAN_POINT('',(-0.69,7.,0.75));+#4502=ORIENTED_EDGE('',*,*,#4503,.T.);+#4503=EDGE_CURVE('',#4500,#926,#4504,.T.);+#4504=LINE('',#4505,#2043);+#4505=CARTESIAN_POINT('',(-0.69,7.,0.630119079428));+#4506=ORIENTED_EDGE('',*,*,#925,.F.);+#4507=ADVANCED_FACE('',(#4508),#4567,.F.);+#4508=FACE_BOUND('',#4509,.F.);+#4509=EDGE_LOOP('',(#4510,#4511,#4517,#4524,#4529,#4536,#4541,#4546,#4551,#4557,#4562,#4566));+#4510=ORIENTED_EDGE('',*,*,#4503,.F.);+#4511=ORIENTED_EDGE('',*,*,#4512,.T.);+#4512=EDGE_CURVE('',#4500,#4513,#4515,.T.);+#4513=VERTEX_POINT('',#4514);+#4514=CARTESIAN_POINT('',(-0.69,7.2,0.75));+#4515=LINE('',#4516,#2377);+#4516=CARTESIAN_POINT('',(-0.69,6.85,0.75));+#4517=ORIENTED_EDGE('',*,*,#4518,.T.);+#4518=EDGE_CURVE('',#4513,#4519,#4521,.T.);+#4519=VERTEX_POINT('',#4520);+#4520=CARTESIAN_POINT('',(-0.69,7.298480775301,0.667364817767));+#4521=CIRCLE('',#4522,0.1);+#4522=AXIS2_PLACEMENT_3D('',#4523,#2386,#2387);+#4523=CARTESIAN_POINT('',(-0.69,7.2,0.65));+#4524=ORIENTED_EDGE('',*,*,#4525,.T.);+#4525=EDGE_CURVE('',#4519,#4526,#4528,.T.);+#4526=VERTEX_POINT('',#4527);+#4527=CARTESIAN_POINT('',(-0.69,7.382385590716,0.165270364467));+#4528=LINE('',#4520,#2393);+#4529=ORIENTED_EDGE('',*,*,#4530,.T.);+#4530=EDGE_CURVE('',#4526,#4531,#4533,.T.);+#4531=VERTEX_POINT('',#4532);+#4532=CARTESIAN_POINT('',(-0.69,7.579347141319,1.387778780781E-16));+#4533=CIRCLE('',#4534,0.2);+#4534=AXIS2_PLACEMENT_3D('',#4535,#452,#2402);+#4535=CARTESIAN_POINT('',(-0.69,7.579347141319,0.2));+#4536=ORIENTED_EDGE('',*,*,#4537,.T.);+#4537=EDGE_CURVE('',#4531,#4538,#4540,.T.);+#4538=VERTEX_POINT('',#4539);+#4539=CARTESIAN_POINT('',(-0.69,8.,1.387778780781E-16));+#4540=LINE('',#4532,#2377);+#4541=ORIENTED_EDGE('',*,*,#4542,.T.);+#4542=EDGE_CURVE('',#4538,#4543,#4545,.T.);+#4543=VERTEX_POINT('',#4544);+#4544=CARTESIAN_POINT('',(-0.69,8.,0.1));+#4545=LINE('',#4539,#2043);+#4546=ORIENTED_EDGE('',*,*,#4547,.T.);+#4547=EDGE_CURVE('',#4543,#4548,#4550,.T.);+#4548=VERTEX_POINT('',#4549);+#4549=CARTESIAN_POINT('',(-0.69,7.579347141319,0.1));+#4550=LINE('',#4544,#407);+#4551=ORIENTED_EDGE('',*,*,#4552,.T.);+#4552=EDGE_CURVE('',#4548,#4553,#4555,.T.);+#4553=VERTEX_POINT('',#4554);+#4554=CARTESIAN_POINT('',(-0.69,7.480866366018,0.182635182233));+#4555=CIRCLE('',#4556,1.E-01);+#4556=AXIS2_PLACEMENT_3D('',#4535,#2424,#2425);+#4557=ORIENTED_EDGE('',*,*,#4558,.T.);+#4558=EDGE_CURVE('',#4553,#4559,#4561,.T.);+#4559=VERTEX_POINT('',#4560);+#4560=CARTESIAN_POINT('',(-0.69,7.396961550602,0.684729635533));+#4561=LINE('',#4554,#2431);+#4562=ORIENTED_EDGE('',*,*,#4563,.T.);+#4563=EDGE_CURVE('',#4559,#938,#4564,.T.);+#4564=CIRCLE('',#4565,0.2);+#4565=AXIS2_PLACEMENT_3D('',#4523,#14,#2437);+#4566=ORIENTED_EDGE('',*,*,#937,.T.);+#4567=PLANE('',#4568);+#4568=AXIS2_PLACEMENT_3D('',#4569,#452,#13);+#4569=CARTESIAN_POINT('',(-0.69,7.414276639233,0.410238158856));+#4570=ADVANCED_FACE('',(#4571),#4634,.T.);+#4571=FACE_BOUND('',#4572,.T.);+#4572=EDGE_LOOP('',(#4573,#4579,#4585,#4592,#4597,#4604,#4609,#4614,#4619,#4625,#4630,#944));+#4573=ORIENTED_EDGE('',*,*,#4574,.F.);+#4574=EDGE_CURVE('',#4575,#946,#4577,.T.);+#4575=VERTEX_POINT('',#4576);+#4576=CARTESIAN_POINT('',(-0.51,7.,0.75));+#4577=LINE('',#4578,#2043);+#4578=CARTESIAN_POINT('',(-0.51,7.,0.630119079428));+#4579=ORIENTED_EDGE('',*,*,#4580,.T.);+#4580=EDGE_CURVE('',#4575,#4581,#4583,.T.);+#4581=VERTEX_POINT('',#4582);+#4582=CARTESIAN_POINT('',(-0.51,7.2,0.75));+#4583=LINE('',#4584,#2377);+#4584=CARTESIAN_POINT('',(-0.51,6.85,0.75));+#4585=ORIENTED_EDGE('',*,*,#4586,.T.);+#4586=EDGE_CURVE('',#4581,#4587,#4589,.T.);+#4587=VERTEX_POINT('',#4588);+#4588=CARTESIAN_POINT('',(-0.51,7.298480775301,0.667364817767));+#4589=CIRCLE('',#4590,0.1);+#4590=AXIS2_PLACEMENT_3D('',#4591,#2386,#2387);+#4591=CARTESIAN_POINT('',(-0.51,7.2,0.65));+#4592=ORIENTED_EDGE('',*,*,#4593,.T.);+#4593=EDGE_CURVE('',#4587,#4594,#4596,.T.);+#4594=VERTEX_POINT('',#4595);+#4595=CARTESIAN_POINT('',(-0.51,7.382385590716,0.165270364467));+#4596=LINE('',#4588,#2393);+#4597=ORIENTED_EDGE('',*,*,#4598,.T.);+#4598=EDGE_CURVE('',#4594,#4599,#4601,.T.);+#4599=VERTEX_POINT('',#4600);+#4600=CARTESIAN_POINT('',(-0.51,7.579347141319,1.387778780781E-16));+#4601=CIRCLE('',#4602,0.2);+#4602=AXIS2_PLACEMENT_3D('',#4603,#452,#2402);+#4603=CARTESIAN_POINT('',(-0.51,7.579347141319,0.2));+#4604=ORIENTED_EDGE('',*,*,#4605,.T.);+#4605=EDGE_CURVE('',#4599,#4606,#4608,.T.);+#4606=VERTEX_POINT('',#4607);+#4607=CARTESIAN_POINT('',(-0.51,8.,1.387778780781E-16));+#4608=LINE('',#4600,#2377);+#4609=ORIENTED_EDGE('',*,*,#4610,.T.);+#4610=EDGE_CURVE('',#4606,#4611,#4613,.T.);+#4611=VERTEX_POINT('',#4612);+#4612=CARTESIAN_POINT('',(-0.51,8.,0.1));+#4613=LINE('',#4607,#2043);+#4614=ORIENTED_EDGE('',*,*,#4615,.T.);+#4615=EDGE_CURVE('',#4611,#4616,#4618,.T.);+#4616=VERTEX_POINT('',#4617);+#4617=CARTESIAN_POINT('',(-0.51,7.579347141319,0.1));+#4618=LINE('',#4612,#407);+#4619=ORIENTED_EDGE('',*,*,#4620,.T.);+#4620=EDGE_CURVE('',#4616,#4621,#4623,.T.);+#4621=VERTEX_POINT('',#4622);+#4622=CARTESIAN_POINT('',(-0.51,7.480866366018,0.182635182233));+#4623=CIRCLE('',#4624,1.E-01);+#4624=AXIS2_PLACEMENT_3D('',#4603,#2424,#2425);+#4625=ORIENTED_EDGE('',*,*,#4626,.T.);+#4626=EDGE_CURVE('',#4621,#4627,#4629,.T.);+#4627=VERTEX_POINT('',#4628);+#4628=CARTESIAN_POINT('',(-0.51,7.396961550602,0.684729635533));+#4629=LINE('',#4622,#2431);+#4630=ORIENTED_EDGE('',*,*,#4631,.T.);+#4631=EDGE_CURVE('',#4627,#941,#4632,.T.);+#4632=CIRCLE('',#4633,0.2);+#4633=AXIS2_PLACEMENT_3D('',#4591,#14,#2437);+#4634=PLANE('',#4635);+#4635=AXIS2_PLACEMENT_3D('',#4636,#452,#13);+#4636=CARTESIAN_POINT('',(-0.51,7.414276639233,0.410238158856));+#4637=ADVANCED_FACE('',(#4638),#4645,.T.);+#4638=FACE_BOUND('',#4639,.F.);+#4639=EDGE_LOOP('',(#4640,#4630,#4643,#4644));+#4640=ORIENTED_EDGE('',*,*,#4641,.T.);+#4641=EDGE_CURVE('',#4559,#4627,#4642,.T.);+#4642=LINE('',#4560,#451);+#4643=ORIENTED_EDGE('',*,*,#940,.F.);+#4644=ORIENTED_EDGE('',*,*,#4563,.F.);+#4645=CYLINDRICAL_SURFACE('',#4646,0.2);+#4646=AXIS2_PLACEMENT_3D('',#4523,#2386,#2437);+#4647=ADVANCED_FACE('',(#4648),#2365,.F.);+#4648=FACE_BOUND('',#4649,.F.);+#4649=EDGE_LOOP('',(#4573,#4650,#4654,#4658));+#4650=ORIENTED_EDGE('',*,*,#4651,.T.);+#4651=EDGE_CURVE('',#4575,#4652,#2359,.T.);+#4652=VERTEX_POINT('',#4653);+#4653=CARTESIAN_POINT('',(-0.29,7.,0.75));+#4654=ORIENTED_EDGE('',*,*,#4655,.T.);+#4655=EDGE_CURVE('',#4652,#961,#4656,.T.);+#4656=LINE('',#4657,#2043);+#4657=CARTESIAN_POINT('',(-0.29,7.,0.630119079428));+#4658=ORIENTED_EDGE('',*,*,#960,.F.);+#4659=ADVANCED_FACE('',(#4660),#4719,.F.);+#4660=FACE_BOUND('',#4661,.F.);+#4661=EDGE_LOOP('',(#4662,#4663,#4669,#4676,#4681,#4688,#4693,#4698,#4703,#4709,#4714,#4718));+#4662=ORIENTED_EDGE('',*,*,#4655,.F.);+#4663=ORIENTED_EDGE('',*,*,#4664,.T.);+#4664=EDGE_CURVE('',#4652,#4665,#4667,.T.);+#4665=VERTEX_POINT('',#4666);+#4666=CARTESIAN_POINT('',(-0.29,7.2,0.75));+#4667=LINE('',#4668,#2377);+#4668=CARTESIAN_POINT('',(-0.29,6.85,0.75));+#4669=ORIENTED_EDGE('',*,*,#4670,.T.);+#4670=EDGE_CURVE('',#4665,#4671,#4673,.T.);+#4671=VERTEX_POINT('',#4672);+#4672=CARTESIAN_POINT('',(-0.29,7.298480775301,0.667364817767));+#4673=CIRCLE('',#4674,0.1);+#4674=AXIS2_PLACEMENT_3D('',#4675,#2386,#2387);+#4675=CARTESIAN_POINT('',(-0.29,7.2,0.65));+#4676=ORIENTED_EDGE('',*,*,#4677,.T.);+#4677=EDGE_CURVE('',#4671,#4678,#4680,.T.);+#4678=VERTEX_POINT('',#4679);+#4679=CARTESIAN_POINT('',(-0.29,7.382385590716,0.165270364467));+#4680=LINE('',#4672,#2393);+#4681=ORIENTED_EDGE('',*,*,#4682,.T.);+#4682=EDGE_CURVE('',#4678,#4683,#4685,.T.);+#4683=VERTEX_POINT('',#4684);+#4684=CARTESIAN_POINT('',(-0.29,7.579347141319,1.387778780781E-16));+#4685=CIRCLE('',#4686,0.2);+#4686=AXIS2_PLACEMENT_3D('',#4687,#452,#2402);+#4687=CARTESIAN_POINT('',(-0.29,7.579347141319,0.2));+#4688=ORIENTED_EDGE('',*,*,#4689,.T.);+#4689=EDGE_CURVE('',#4683,#4690,#4692,.T.);+#4690=VERTEX_POINT('',#4691);+#4691=CARTESIAN_POINT('',(-0.29,8.,1.387778780781E-16));+#4692=LINE('',#4684,#2377);+#4693=ORIENTED_EDGE('',*,*,#4694,.T.);+#4694=EDGE_CURVE('',#4690,#4695,#4697,.T.);+#4695=VERTEX_POINT('',#4696);+#4696=CARTESIAN_POINT('',(-0.29,8.,0.1));+#4697=LINE('',#4691,#2043);+#4698=ORIENTED_EDGE('',*,*,#4699,.T.);+#4699=EDGE_CURVE('',#4695,#4700,#4702,.T.);+#4700=VERTEX_POINT('',#4701);+#4701=CARTESIAN_POINT('',(-0.29,7.579347141319,0.1));+#4702=LINE('',#4696,#407);+#4703=ORIENTED_EDGE('',*,*,#4704,.T.);+#4704=EDGE_CURVE('',#4700,#4705,#4707,.T.);+#4705=VERTEX_POINT('',#4706);+#4706=CARTESIAN_POINT('',(-0.29,7.480866366018,0.182635182233));+#4707=CIRCLE('',#4708,1.E-01);+#4708=AXIS2_PLACEMENT_3D('',#4687,#2424,#2425);+#4709=ORIENTED_EDGE('',*,*,#4710,.T.);+#4710=EDGE_CURVE('',#4705,#4711,#4713,.T.);+#4711=VERTEX_POINT('',#4712);+#4712=CARTESIAN_POINT('',(-0.29,7.396961550602,0.684729635533));+#4713=LINE('',#4706,#2431);+#4714=ORIENTED_EDGE('',*,*,#4715,.T.);+#4715=EDGE_CURVE('',#4711,#973,#4716,.T.);+#4716=CIRCLE('',#4717,0.2);+#4717=AXIS2_PLACEMENT_3D('',#4675,#14,#2437);+#4718=ORIENTED_EDGE('',*,*,#972,.T.);+#4719=PLANE('',#4720);+#4720=AXIS2_PLACEMENT_3D('',#4721,#452,#13);+#4721=CARTESIAN_POINT('',(-0.29,7.414276639233,0.410238158856));+#4722=ADVANCED_FACE('',(#4723),#4786,.T.);+#4723=FACE_BOUND('',#4724,.T.);+#4724=EDGE_LOOP('',(#4725,#4731,#4737,#4744,#4749,#4756,#4761,#4766,#4771,#4777,#4782,#979));+#4725=ORIENTED_EDGE('',*,*,#4726,.F.);+#4726=EDGE_CURVE('',#4727,#981,#4729,.T.);+#4727=VERTEX_POINT('',#4728);+#4728=CARTESIAN_POINT('',(-0.11,7.,0.75));+#4729=LINE('',#4730,#2043);+#4730=CARTESIAN_POINT('',(-0.11,7.,0.630119079428));+#4731=ORIENTED_EDGE('',*,*,#4732,.T.);+#4732=EDGE_CURVE('',#4727,#4733,#4735,.T.);+#4733=VERTEX_POINT('',#4734);+#4734=CARTESIAN_POINT('',(-0.11,7.2,0.75));+#4735=LINE('',#4736,#2377);+#4736=CARTESIAN_POINT('',(-0.11,6.85,0.75));+#4737=ORIENTED_EDGE('',*,*,#4738,.T.);+#4738=EDGE_CURVE('',#4733,#4739,#4741,.T.);+#4739=VERTEX_POINT('',#4740);+#4740=CARTESIAN_POINT('',(-0.11,7.298480775301,0.667364817767));+#4741=CIRCLE('',#4742,0.1);+#4742=AXIS2_PLACEMENT_3D('',#4743,#2386,#2387);+#4743=CARTESIAN_POINT('',(-0.11,7.2,0.65));+#4744=ORIENTED_EDGE('',*,*,#4745,.T.);+#4745=EDGE_CURVE('',#4739,#4746,#4748,.T.);+#4746=VERTEX_POINT('',#4747);+#4747=CARTESIAN_POINT('',(-0.11,7.382385590716,0.165270364467));+#4748=LINE('',#4740,#2393);+#4749=ORIENTED_EDGE('',*,*,#4750,.T.);+#4750=EDGE_CURVE('',#4746,#4751,#4753,.T.);+#4751=VERTEX_POINT('',#4752);+#4752=CARTESIAN_POINT('',(-0.11,7.579347141319,1.387778780781E-16));+#4753=CIRCLE('',#4754,0.2);+#4754=AXIS2_PLACEMENT_3D('',#4755,#452,#2402);+#4755=CARTESIAN_POINT('',(-0.11,7.579347141319,0.2));+#4756=ORIENTED_EDGE('',*,*,#4757,.T.);+#4757=EDGE_CURVE('',#4751,#4758,#4760,.T.);+#4758=VERTEX_POINT('',#4759);+#4759=CARTESIAN_POINT('',(-0.11,8.,1.387778780781E-16));+#4760=LINE('',#4752,#2377);+#4761=ORIENTED_EDGE('',*,*,#4762,.T.);+#4762=EDGE_CURVE('',#4758,#4763,#4765,.T.);+#4763=VERTEX_POINT('',#4764);+#4764=CARTESIAN_POINT('',(-0.11,8.,0.1));+#4765=LINE('',#4759,#2043);+#4766=ORIENTED_EDGE('',*,*,#4767,.T.);+#4767=EDGE_CURVE('',#4763,#4768,#4770,.T.);+#4768=VERTEX_POINT('',#4769);+#4769=CARTESIAN_POINT('',(-0.11,7.579347141319,0.1));+#4770=LINE('',#4764,#407);+#4771=ORIENTED_EDGE('',*,*,#4772,.T.);+#4772=EDGE_CURVE('',#4768,#4773,#4775,.T.);+#4773=VERTEX_POINT('',#4774);+#4774=CARTESIAN_POINT('',(-0.11,7.480866366018,0.182635182233));+#4775=CIRCLE('',#4776,1.E-01);+#4776=AXIS2_PLACEMENT_3D('',#4755,#2424,#2425);+#4777=ORIENTED_EDGE('',*,*,#4778,.T.);+#4778=EDGE_CURVE('',#4773,#4779,#4781,.T.);+#4779=VERTEX_POINT('',#4780);+#4780=CARTESIAN_POINT('',(-0.11,7.396961550602,0.684729635533));+#4781=LINE('',#4774,#2431);+#4782=ORIENTED_EDGE('',*,*,#4783,.T.);+#4783=EDGE_CURVE('',#4779,#976,#4784,.T.);+#4784=CIRCLE('',#4785,0.2);+#4785=AXIS2_PLACEMENT_3D('',#4743,#14,#2437);+#4786=PLANE('',#4787);+#4787=AXIS2_PLACEMENT_3D('',#4788,#452,#13);+#4788=CARTESIAN_POINT('',(-0.11,7.414276639233,0.410238158856));+#4789=ADVANCED_FACE('',(#4790),#4797,.T.);+#4790=FACE_BOUND('',#4791,.F.);+#4791=EDGE_LOOP('',(#4792,#4782,#4795,#4796));+#4792=ORIENTED_EDGE('',*,*,#4793,.T.);+#4793=EDGE_CURVE('',#4711,#4779,#4794,.T.);+#4794=LINE('',#4712,#451);+#4795=ORIENTED_EDGE('',*,*,#975,.F.);+#4796=ORIENTED_EDGE('',*,*,#4715,.F.);+#4797=CYLINDRICAL_SURFACE('',#4798,0.2);+#4798=AXIS2_PLACEMENT_3D('',#4675,#2386,#2437);+#4799=ADVANCED_FACE('',(#4800),#2365,.F.);+#4800=FACE_BOUND('',#4801,.F.);+#4801=EDGE_LOOP('',(#4725,#4802,#4806,#4810));+#4802=ORIENTED_EDGE('',*,*,#4803,.T.);+#4803=EDGE_CURVE('',#4727,#4804,#2359,.T.);+#4804=VERTEX_POINT('',#4805);+#4805=CARTESIAN_POINT('',(0.11,7.,0.75));+#4806=ORIENTED_EDGE('',*,*,#4807,.T.);+#4807=EDGE_CURVE('',#4804,#996,#4808,.T.);+#4808=LINE('',#4809,#2043);+#4809=CARTESIAN_POINT('',(0.11,7.,0.630119079428));+#4810=ORIENTED_EDGE('',*,*,#995,.F.);+#4811=ADVANCED_FACE('',(#4812),#4871,.F.);+#4812=FACE_BOUND('',#4813,.F.);+#4813=EDGE_LOOP('',(#4814,#4815,#4821,#4828,#4833,#4840,#4845,#4850,#4855,#4861,#4866,#4870));+#4814=ORIENTED_EDGE('',*,*,#4807,.F.);+#4815=ORIENTED_EDGE('',*,*,#4816,.T.);+#4816=EDGE_CURVE('',#4804,#4817,#4819,.T.);+#4817=VERTEX_POINT('',#4818);+#4818=CARTESIAN_POINT('',(0.11,7.2,0.75));+#4819=LINE('',#4820,#2377);+#4820=CARTESIAN_POINT('',(0.11,6.85,0.75));+#4821=ORIENTED_EDGE('',*,*,#4822,.T.);+#4822=EDGE_CURVE('',#4817,#4823,#4825,.T.);+#4823=VERTEX_POINT('',#4824);+#4824=CARTESIAN_POINT('',(0.11,7.298480775301,0.667364817767));+#4825=CIRCLE('',#4826,0.1);+#4826=AXIS2_PLACEMENT_3D('',#4827,#2386,#2387);+#4827=CARTESIAN_POINT('',(0.11,7.2,0.65));+#4828=ORIENTED_EDGE('',*,*,#4829,.T.);+#4829=EDGE_CURVE('',#4823,#4830,#4832,.T.);+#4830=VERTEX_POINT('',#4831);+#4831=CARTESIAN_POINT('',(0.11,7.382385590716,0.165270364467));+#4832=LINE('',#4824,#2393);+#4833=ORIENTED_EDGE('',*,*,#4834,.T.);+#4834=EDGE_CURVE('',#4830,#4835,#4837,.T.);+#4835=VERTEX_POINT('',#4836);+#4836=CARTESIAN_POINT('',(0.11,7.579347141319,1.387778780781E-16));+#4837=CIRCLE('',#4838,0.2);+#4838=AXIS2_PLACEMENT_3D('',#4839,#452,#2402);+#4839=CARTESIAN_POINT('',(0.11,7.579347141319,0.2));+#4840=ORIENTED_EDGE('',*,*,#4841,.T.);+#4841=EDGE_CURVE('',#4835,#4842,#4844,.T.);+#4842=VERTEX_POINT('',#4843);+#4843=CARTESIAN_POINT('',(0.11,8.,1.387778780781E-16));+#4844=LINE('',#4836,#2377);+#4845=ORIENTED_EDGE('',*,*,#4846,.T.);+#4846=EDGE_CURVE('',#4842,#4847,#4849,.T.);+#4847=VERTEX_POINT('',#4848);+#4848=CARTESIAN_POINT('',(0.11,8.,0.1));+#4849=LINE('',#4843,#2043);+#4850=ORIENTED_EDGE('',*,*,#4851,.T.);+#4851=EDGE_CURVE('',#4847,#4852,#4854,.T.);+#4852=VERTEX_POINT('',#4853);+#4853=CARTESIAN_POINT('',(0.11,7.579347141319,0.1));+#4854=LINE('',#4848,#407);+#4855=ORIENTED_EDGE('',*,*,#4856,.T.);+#4856=EDGE_CURVE('',#4852,#4857,#4859,.T.);+#4857=VERTEX_POINT('',#4858);+#4858=CARTESIAN_POINT('',(0.11,7.480866366018,0.182635182233));+#4859=CIRCLE('',#4860,1.E-01);+#4860=AXIS2_PLACEMENT_3D('',#4839,#2424,#2425);+#4861=ORIENTED_EDGE('',*,*,#4862,.T.);+#4862=EDGE_CURVE('',#4857,#4863,#4865,.T.);+#4863=VERTEX_POINT('',#4864);+#4864=CARTESIAN_POINT('',(0.11,7.396961550602,0.684729635533));+#4865=LINE('',#4858,#2431);+#4866=ORIENTED_EDGE('',*,*,#4867,.T.);+#4867=EDGE_CURVE('',#4863,#1008,#4868,.T.);+#4868=CIRCLE('',#4869,0.2);+#4869=AXIS2_PLACEMENT_3D('',#4827,#14,#2437);+#4870=ORIENTED_EDGE('',*,*,#1007,.T.);+#4871=PLANE('',#4872);+#4872=AXIS2_PLACEMENT_3D('',#4873,#452,#13);+#4873=CARTESIAN_POINT('',(0.11,7.414276639233,0.410238158856));+#4874=ADVANCED_FACE('',(#4875),#4938,.T.);+#4875=FACE_BOUND('',#4876,.T.);+#4876=EDGE_LOOP('',(#4877,#4883,#4889,#4896,#4901,#4908,#4913,#4918,#4923,#4929,#4934,#1014));+#4877=ORIENTED_EDGE('',*,*,#4878,.F.);+#4878=EDGE_CURVE('',#4879,#1016,#4881,.T.);+#4879=VERTEX_POINT('',#4880);+#4880=CARTESIAN_POINT('',(0.29,7.,0.75));+#4881=LINE('',#4882,#2043);+#4882=CARTESIAN_POINT('',(0.29,7.,0.630119079428));+#4883=ORIENTED_EDGE('',*,*,#4884,.T.);+#4884=EDGE_CURVE('',#4879,#4885,#4887,.T.);+#4885=VERTEX_POINT('',#4886);+#4886=CARTESIAN_POINT('',(0.29,7.2,0.75));+#4887=LINE('',#4888,#2377);+#4888=CARTESIAN_POINT('',(0.29,6.85,0.75));+#4889=ORIENTED_EDGE('',*,*,#4890,.T.);+#4890=EDGE_CURVE('',#4885,#4891,#4893,.T.);+#4891=VERTEX_POINT('',#4892);+#4892=CARTESIAN_POINT('',(0.29,7.298480775301,0.667364817767));+#4893=CIRCLE('',#4894,0.1);+#4894=AXIS2_PLACEMENT_3D('',#4895,#2386,#2387);+#4895=CARTESIAN_POINT('',(0.29,7.2,0.65));+#4896=ORIENTED_EDGE('',*,*,#4897,.T.);+#4897=EDGE_CURVE('',#4891,#4898,#4900,.T.);+#4898=VERTEX_POINT('',#4899);+#4899=CARTESIAN_POINT('',(0.29,7.382385590716,0.165270364467));+#4900=LINE('',#4892,#2393);+#4901=ORIENTED_EDGE('',*,*,#4902,.T.);+#4902=EDGE_CURVE('',#4898,#4903,#4905,.T.);+#4903=VERTEX_POINT('',#4904);+#4904=CARTESIAN_POINT('',(0.29,7.579347141319,1.387778780781E-16));+#4905=CIRCLE('',#4906,0.2);+#4906=AXIS2_PLACEMENT_3D('',#4907,#452,#2402);+#4907=CARTESIAN_POINT('',(0.29,7.579347141319,0.2));+#4908=ORIENTED_EDGE('',*,*,#4909,.T.);+#4909=EDGE_CURVE('',#4903,#4910,#4912,.T.);+#4910=VERTEX_POINT('',#4911);+#4911=CARTESIAN_POINT('',(0.29,8.,1.387778780781E-16));+#4912=LINE('',#4904,#2377);+#4913=ORIENTED_EDGE('',*,*,#4914,.T.);+#4914=EDGE_CURVE('',#4910,#4915,#4917,.T.);+#4915=VERTEX_POINT('',#4916);+#4916=CARTESIAN_POINT('',(0.29,8.,0.1));+#4917=LINE('',#4911,#2043);+#4918=ORIENTED_EDGE('',*,*,#4919,.T.);+#4919=EDGE_CURVE('',#4915,#4920,#4922,.T.);+#4920=VERTEX_POINT('',#4921);+#4921=CARTESIAN_POINT('',(0.29,7.579347141319,0.1));+#4922=LINE('',#4916,#407);+#4923=ORIENTED_EDGE('',*,*,#4924,.T.);+#4924=EDGE_CURVE('',#4920,#4925,#4927,.T.);+#4925=VERTEX_POINT('',#4926);+#4926=CARTESIAN_POINT('',(0.29,7.480866366018,0.182635182233));+#4927=CIRCLE('',#4928,1.E-01);+#4928=AXIS2_PLACEMENT_3D('',#4907,#2424,#2425);+#4929=ORIENTED_EDGE('',*,*,#4930,.T.);+#4930=EDGE_CURVE('',#4925,#4931,#4933,.T.);+#4931=VERTEX_POINT('',#4932);+#4932=CARTESIAN_POINT('',(0.29,7.396961550602,0.684729635533));+#4933=LINE('',#4926,#2431);+#4934=ORIENTED_EDGE('',*,*,#4935,.T.);+#4935=EDGE_CURVE('',#4931,#1011,#4936,.T.);+#4936=CIRCLE('',#4937,0.2);+#4937=AXIS2_PLACEMENT_3D('',#4895,#14,#2437);+#4938=PLANE('',#4939);+#4939=AXIS2_PLACEMENT_3D('',#4940,#452,#13);+#4940=CARTESIAN_POINT('',(0.29,7.414276639233,0.410238158856));+#4941=ADVANCED_FACE('',(#4942),#4949,.T.);+#4942=FACE_BOUND('',#4943,.F.);+#4943=EDGE_LOOP('',(#4944,#4934,#4947,#4948));+#4944=ORIENTED_EDGE('',*,*,#4945,.T.);+#4945=EDGE_CURVE('',#4863,#4931,#4946,.T.);+#4946=LINE('',#4864,#451);+#4947=ORIENTED_EDGE('',*,*,#1010,.F.);+#4948=ORIENTED_EDGE('',*,*,#4867,.F.);+#4949=CYLINDRICAL_SURFACE('',#4950,0.2);+#4950=AXIS2_PLACEMENT_3D('',#4827,#2386,#2437);+#4951=ADVANCED_FACE('',(#4952),#2365,.F.);+#4952=FACE_BOUND('',#4953,.F.);+#4953=EDGE_LOOP('',(#4877,#4954,#4958,#4962));+#4954=ORIENTED_EDGE('',*,*,#4955,.T.);+#4955=EDGE_CURVE('',#4879,#4956,#2359,.T.);+#4956=VERTEX_POINT('',#4957);+#4957=CARTESIAN_POINT('',(0.51,7.,0.75));+#4958=ORIENTED_EDGE('',*,*,#4959,.T.);+#4959=EDGE_CURVE('',#4956,#1031,#4960,.T.);+#4960=LINE('',#4961,#2043);+#4961=CARTESIAN_POINT('',(0.51,7.,0.630119079428));+#4962=ORIENTED_EDGE('',*,*,#1030,.F.);+#4963=ADVANCED_FACE('',(#4964),#5023,.F.);+#4964=FACE_BOUND('',#4965,.F.);+#4965=EDGE_LOOP('',(#4966,#4967,#4973,#4980,#4985,#4992,#4997,#5002,#5007,#5013,#5018,#5022));+#4966=ORIENTED_EDGE('',*,*,#4959,.F.);+#4967=ORIENTED_EDGE('',*,*,#4968,.T.);+#4968=EDGE_CURVE('',#4956,#4969,#4971,.T.);+#4969=VERTEX_POINT('',#4970);+#4970=CARTESIAN_POINT('',(0.51,7.2,0.75));+#4971=LINE('',#4972,#2377);+#4972=CARTESIAN_POINT('',(0.51,6.85,0.75));+#4973=ORIENTED_EDGE('',*,*,#4974,.T.);+#4974=EDGE_CURVE('',#4969,#4975,#4977,.T.);+#4975=VERTEX_POINT('',#4976);+#4976=CARTESIAN_POINT('',(0.51,7.298480775301,0.667364817767));+#4977=CIRCLE('',#4978,0.1);+#4978=AXIS2_PLACEMENT_3D('',#4979,#2386,#2387);+#4979=CARTESIAN_POINT('',(0.51,7.2,0.65));+#4980=ORIENTED_EDGE('',*,*,#4981,.T.);+#4981=EDGE_CURVE('',#4975,#4982,#4984,.T.);+#4982=VERTEX_POINT('',#4983);+#4983=CARTESIAN_POINT('',(0.51,7.382385590716,0.165270364467));+#4984=LINE('',#4976,#2393);+#4985=ORIENTED_EDGE('',*,*,#4986,.T.);+#4986=EDGE_CURVE('',#4982,#4987,#4989,.T.);+#4987=VERTEX_POINT('',#4988);+#4988=CARTESIAN_POINT('',(0.51,7.579347141319,1.387778780781E-16));+#4989=CIRCLE('',#4990,0.2);+#4990=AXIS2_PLACEMENT_3D('',#4991,#452,#2402);+#4991=CARTESIAN_POINT('',(0.51,7.579347141319,0.2));+#4992=ORIENTED_EDGE('',*,*,#4993,.T.);+#4993=EDGE_CURVE('',#4987,#4994,#4996,.T.);+#4994=VERTEX_POINT('',#4995);+#4995=CARTESIAN_POINT('',(0.51,8.,1.387778780781E-16));+#4996=LINE('',#4988,#2377);+#4997=ORIENTED_EDGE('',*,*,#4998,.T.);+#4998=EDGE_CURVE('',#4994,#4999,#5001,.T.);+#4999=VERTEX_POINT('',#5000);+#5000=CARTESIAN_POINT('',(0.51,8.,0.1));+#5001=LINE('',#4995,#2043);+#5002=ORIENTED_EDGE('',*,*,#5003,.T.);+#5003=EDGE_CURVE('',#4999,#5004,#5006,.T.);+#5004=VERTEX_POINT('',#5005);+#5005=CARTESIAN_POINT('',(0.51,7.579347141319,0.1));+#5006=LINE('',#5000,#407);+#5007=ORIENTED_EDGE('',*,*,#5008,.T.);+#5008=EDGE_CURVE('',#5004,#5009,#5011,.T.);+#5009=VERTEX_POINT('',#5010);+#5010=CARTESIAN_POINT('',(0.51,7.480866366018,0.182635182233));+#5011=CIRCLE('',#5012,1.E-01);+#5012=AXIS2_PLACEMENT_3D('',#4991,#2424,#2425);+#5013=ORIENTED_EDGE('',*,*,#5014,.T.);+#5014=EDGE_CURVE('',#5009,#5015,#5017,.T.);+#5015=VERTEX_POINT('',#5016);+#5016=CARTESIAN_POINT('',(0.51,7.396961550602,0.684729635533));+#5017=LINE('',#5010,#2431);+#5018=ORIENTED_EDGE('',*,*,#5019,.T.);+#5019=EDGE_CURVE('',#5015,#1043,#5020,.T.);+#5020=CIRCLE('',#5021,0.2);+#5021=AXIS2_PLACEMENT_3D('',#4979,#14,#2437);+#5022=ORIENTED_EDGE('',*,*,#1042,.T.);+#5023=PLANE('',#5024);+#5024=AXIS2_PLACEMENT_3D('',#5025,#452,#13);+#5025=CARTESIAN_POINT('',(0.51,7.414276639233,0.410238158856));+#5026=ADVANCED_FACE('',(#5027),#5090,.T.);+#5027=FACE_BOUND('',#5028,.T.);+#5028=EDGE_LOOP('',(#5029,#5035,#5041,#5048,#5053,#5060,#5065,#5070,#5075,#5081,#5086,#1049));+#5029=ORIENTED_EDGE('',*,*,#5030,.F.);+#5030=EDGE_CURVE('',#5031,#1051,#5033,.T.);+#5031=VERTEX_POINT('',#5032);+#5032=CARTESIAN_POINT('',(0.69,7.,0.75));+#5033=LINE('',#5034,#2043);+#5034=CARTESIAN_POINT('',(0.69,7.,0.630119079428));+#5035=ORIENTED_EDGE('',*,*,#5036,.T.);+#5036=EDGE_CURVE('',#5031,#5037,#5039,.T.);+#5037=VERTEX_POINT('',#5038);+#5038=CARTESIAN_POINT('',(0.69,7.2,0.75));+#5039=LINE('',#5040,#2377);+#5040=CARTESIAN_POINT('',(0.69,6.85,0.75));+#5041=ORIENTED_EDGE('',*,*,#5042,.T.);+#5042=EDGE_CURVE('',#5037,#5043,#5045,.T.);+#5043=VERTEX_POINT('',#5044);+#5044=CARTESIAN_POINT('',(0.69,7.298480775301,0.667364817767));+#5045=CIRCLE('',#5046,0.1);+#5046=AXIS2_PLACEMENT_3D('',#5047,#2386,#2387);+#5047=CARTESIAN_POINT('',(0.69,7.2,0.65));+#5048=ORIENTED_EDGE('',*,*,#5049,.T.);+#5049=EDGE_CURVE('',#5043,#5050,#5052,.T.);+#5050=VERTEX_POINT('',#5051);+#5051=CARTESIAN_POINT('',(0.69,7.382385590716,0.165270364467));+#5052=LINE('',#5044,#2393);+#5053=ORIENTED_EDGE('',*,*,#5054,.T.);+#5054=EDGE_CURVE('',#5050,#5055,#5057,.T.);+#5055=VERTEX_POINT('',#5056);+#5056=CARTESIAN_POINT('',(0.69,7.579347141319,1.387778780781E-16));+#5057=CIRCLE('',#5058,0.2);+#5058=AXIS2_PLACEMENT_3D('',#5059,#452,#2402);+#5059=CARTESIAN_POINT('',(0.69,7.579347141319,0.2));+#5060=ORIENTED_EDGE('',*,*,#5061,.T.);+#5061=EDGE_CURVE('',#5055,#5062,#5064,.T.);+#5062=VERTEX_POINT('',#5063);+#5063=CARTESIAN_POINT('',(0.69,8.,1.387778780781E-16));+#5064=LINE('',#5056,#2377);+#5065=ORIENTED_EDGE('',*,*,#5066,.T.);+#5066=EDGE_CURVE('',#5062,#5067,#5069,.T.);+#5067=VERTEX_POINT('',#5068);+#5068=CARTESIAN_POINT('',(0.69,8.,0.1));+#5069=LINE('',#5063,#2043);+#5070=ORIENTED_EDGE('',*,*,#5071,.T.);+#5071=EDGE_CURVE('',#5067,#5072,#5074,.T.);+#5072=VERTEX_POINT('',#5073);+#5073=CARTESIAN_POINT('',(0.69,7.579347141319,0.1));+#5074=LINE('',#5068,#407);+#5075=ORIENTED_EDGE('',*,*,#5076,.T.);+#5076=EDGE_CURVE('',#5072,#5077,#5079,.T.);+#5077=VERTEX_POINT('',#5078);+#5078=CARTESIAN_POINT('',(0.69,7.480866366018,0.182635182233));+#5079=CIRCLE('',#5080,1.E-01);+#5080=AXIS2_PLACEMENT_3D('',#5059,#2424,#2425);+#5081=ORIENTED_EDGE('',*,*,#5082,.T.);+#5082=EDGE_CURVE('',#5077,#5083,#5085,.T.);+#5083=VERTEX_POINT('',#5084);+#5084=CARTESIAN_POINT('',(0.69,7.396961550602,0.684729635533));+#5085=LINE('',#5078,#2431);+#5086=ORIENTED_EDGE('',*,*,#5087,.T.);+#5087=EDGE_CURVE('',#5083,#1046,#5088,.T.);+#5088=CIRCLE('',#5089,0.2);+#5089=AXIS2_PLACEMENT_3D('',#5047,#14,#2437);+#5090=PLANE('',#5091);+#5091=AXIS2_PLACEMENT_3D('',#5092,#452,#13);+#5092=CARTESIAN_POINT('',(0.69,7.414276639233,0.410238158856));+#5093=ADVANCED_FACE('',(#5094),#5101,.T.);+#5094=FACE_BOUND('',#5095,.F.);+#5095=EDGE_LOOP('',(#5096,#5086,#5099,#5100));+#5096=ORIENTED_EDGE('',*,*,#5097,.T.);+#5097=EDGE_CURVE('',#5015,#5083,#5098,.T.);+#5098=LINE('',#5016,#451);+#5099=ORIENTED_EDGE('',*,*,#1045,.F.);+#5100=ORIENTED_EDGE('',*,*,#5019,.F.);+#5101=CYLINDRICAL_SURFACE('',#5102,0.2);+#5102=AXIS2_PLACEMENT_3D('',#4979,#2386,#2437);+#5103=ADVANCED_FACE('',(#5104),#2365,.F.);+#5104=FACE_BOUND('',#5105,.F.);+#5105=EDGE_LOOP('',(#5029,#5106,#5110,#5114));+#5106=ORIENTED_EDGE('',*,*,#5107,.T.);+#5107=EDGE_CURVE('',#5031,#5108,#2359,.T.);+#5108=VERTEX_POINT('',#5109);+#5109=CARTESIAN_POINT('',(0.91,7.,0.75));+#5110=ORIENTED_EDGE('',*,*,#5111,.T.);+#5111=EDGE_CURVE('',#5108,#1066,#5112,.T.);+#5112=LINE('',#5113,#2043);+#5113=CARTESIAN_POINT('',(0.91,7.,0.630119079428));+#5114=ORIENTED_EDGE('',*,*,#1065,.F.);+#5115=ADVANCED_FACE('',(#5116),#5175,.F.);+#5116=FACE_BOUND('',#5117,.F.);+#5117=EDGE_LOOP('',(#5118,#5119,#5125,#5132,#5137,#5144,#5149,#5154,#5159,#5165,#5170,#5174));+#5118=ORIENTED_EDGE('',*,*,#5111,.F.);+#5119=ORIENTED_EDGE('',*,*,#5120,.T.);+#5120=EDGE_CURVE('',#5108,#5121,#5123,.T.);+#5121=VERTEX_POINT('',#5122);+#5122=CARTESIAN_POINT('',(0.91,7.2,0.75));+#5123=LINE('',#5124,#2377);+#5124=CARTESIAN_POINT('',(0.91,6.85,0.75));+#5125=ORIENTED_EDGE('',*,*,#5126,.T.);+#5126=EDGE_CURVE('',#5121,#5127,#5129,.T.);+#5127=VERTEX_POINT('',#5128);+#5128=CARTESIAN_POINT('',(0.91,7.298480775301,0.667364817767));+#5129=CIRCLE('',#5130,0.1);+#5130=AXIS2_PLACEMENT_3D('',#5131,#2386,#2387);+#5131=CARTESIAN_POINT('',(0.91,7.2,0.65));+#5132=ORIENTED_EDGE('',*,*,#5133,.T.);+#5133=EDGE_CURVE('',#5127,#5134,#5136,.T.);+#5134=VERTEX_POINT('',#5135);+#5135=CARTESIAN_POINT('',(0.91,7.382385590716,0.165270364467));+#5136=LINE('',#5128,#2393);+#5137=ORIENTED_EDGE('',*,*,#5138,.T.);+#5138=EDGE_CURVE('',#5134,#5139,#5141,.T.);+#5139=VERTEX_POINT('',#5140);+#5140=CARTESIAN_POINT('',(0.91,7.579347141319,1.387778780781E-16));+#5141=CIRCLE('',#5142,0.2);+#5142=AXIS2_PLACEMENT_3D('',#5143,#452,#2402);+#5143=CARTESIAN_POINT('',(0.91,7.579347141319,0.2));+#5144=ORIENTED_EDGE('',*,*,#5145,.T.);+#5145=EDGE_CURVE('',#5139,#5146,#5148,.T.);+#5146=VERTEX_POINT('',#5147);+#5147=CARTESIAN_POINT('',(0.91,8.,1.387778780781E-16));+#5148=LINE('',#5140,#2377);+#5149=ORIENTED_EDGE('',*,*,#5150,.T.);+#5150=EDGE_CURVE('',#5146,#5151,#5153,.T.);+#5151=VERTEX_POINT('',#5152);+#5152=CARTESIAN_POINT('',(0.91,8.,0.1));+#5153=LINE('',#5147,#2043);+#5154=ORIENTED_EDGE('',*,*,#5155,.T.);+#5155=EDGE_CURVE('',#5151,#5156,#5158,.T.);+#5156=VERTEX_POINT('',#5157);+#5157=CARTESIAN_POINT('',(0.91,7.579347141319,0.1));+#5158=LINE('',#5152,#407);+#5159=ORIENTED_EDGE('',*,*,#5160,.T.);+#5160=EDGE_CURVE('',#5156,#5161,#5163,.T.);+#5161=VERTEX_POINT('',#5162);+#5162=CARTESIAN_POINT('',(0.91,7.480866366018,0.182635182233));+#5163=CIRCLE('',#5164,1.E-01);+#5164=AXIS2_PLACEMENT_3D('',#5143,#2424,#2425);+#5165=ORIENTED_EDGE('',*,*,#5166,.T.);+#5166=EDGE_CURVE('',#5161,#5167,#5169,.T.);+#5167=VERTEX_POINT('',#5168);+#5168=CARTESIAN_POINT('',(0.91,7.396961550602,0.684729635533));+#5169=LINE('',#5162,#2431);+#5170=ORIENTED_EDGE('',*,*,#5171,.T.);+#5171=EDGE_CURVE('',#5167,#1078,#5172,.T.);+#5172=CIRCLE('',#5173,0.2);+#5173=AXIS2_PLACEMENT_3D('',#5131,#14,#2437);+#5174=ORIENTED_EDGE('',*,*,#1077,.T.);+#5175=PLANE('',#5176);+#5176=AXIS2_PLACEMENT_3D('',#5177,#452,#13);+#5177=CARTESIAN_POINT('',(0.91,7.414276639233,0.410238158856));+#5178=ADVANCED_FACE('',(#5179),#5242,.T.);+#5179=FACE_BOUND('',#5180,.T.);+#5180=EDGE_LOOP('',(#5181,#5187,#5193,#5200,#5205,#5212,#5217,#5222,#5227,#5233,#5238,#1084));+#5181=ORIENTED_EDGE('',*,*,#5182,.F.);+#5182=EDGE_CURVE('',#5183,#1086,#5185,.T.);+#5183=VERTEX_POINT('',#5184);+#5184=CARTESIAN_POINT('',(1.09,7.,0.75));+#5185=LINE('',#5186,#2043);+#5186=CARTESIAN_POINT('',(1.09,7.,0.630119079428));+#5187=ORIENTED_EDGE('',*,*,#5188,.T.);+#5188=EDGE_CURVE('',#5183,#5189,#5191,.T.);+#5189=VERTEX_POINT('',#5190);+#5190=CARTESIAN_POINT('',(1.09,7.2,0.75));+#5191=LINE('',#5192,#2377);+#5192=CARTESIAN_POINT('',(1.09,6.85,0.75));+#5193=ORIENTED_EDGE('',*,*,#5194,.T.);+#5194=EDGE_CURVE('',#5189,#5195,#5197,.T.);+#5195=VERTEX_POINT('',#5196);+#5196=CARTESIAN_POINT('',(1.09,7.298480775301,0.667364817767));+#5197=CIRCLE('',#5198,0.1);+#5198=AXIS2_PLACEMENT_3D('',#5199,#2386,#2387);+#5199=CARTESIAN_POINT('',(1.09,7.2,0.65));+#5200=ORIENTED_EDGE('',*,*,#5201,.T.);+#5201=EDGE_CURVE('',#5195,#5202,#5204,.T.);+#5202=VERTEX_POINT('',#5203);+#5203=CARTESIAN_POINT('',(1.09,7.382385590716,0.165270364467));+#5204=LINE('',#5196,#2393);+#5205=ORIENTED_EDGE('',*,*,#5206,.T.);+#5206=EDGE_CURVE('',#5202,#5207,#5209,.T.);+#5207=VERTEX_POINT('',#5208);+#5208=CARTESIAN_POINT('',(1.09,7.579347141319,1.387778780781E-16));+#5209=CIRCLE('',#5210,0.2);+#5210=AXIS2_PLACEMENT_3D('',#5211,#452,#2402);+#5211=CARTESIAN_POINT('',(1.09,7.579347141319,0.2));+#5212=ORIENTED_EDGE('',*,*,#5213,.T.);+#5213=EDGE_CURVE('',#5207,#5214,#5216,.T.);+#5214=VERTEX_POINT('',#5215);+#5215=CARTESIAN_POINT('',(1.09,8.,1.387778780781E-16));+#5216=LINE('',#5208,#2377);+#5217=ORIENTED_EDGE('',*,*,#5218,.T.);+#5218=EDGE_CURVE('',#5214,#5219,#5221,.T.);+#5219=VERTEX_POINT('',#5220);+#5220=CARTESIAN_POINT('',(1.09,8.,0.1));+#5221=LINE('',#5215,#2043);+#5222=ORIENTED_EDGE('',*,*,#5223,.T.);+#5223=EDGE_CURVE('',#5219,#5224,#5226,.T.);+#5224=VERTEX_POINT('',#5225);+#5225=CARTESIAN_POINT('',(1.09,7.579347141319,0.1));+#5226=LINE('',#5220,#407);+#5227=ORIENTED_EDGE('',*,*,#5228,.T.);+#5228=EDGE_CURVE('',#5224,#5229,#5231,.T.);+#5229=VERTEX_POINT('',#5230);+#5230=CARTESIAN_POINT('',(1.09,7.480866366018,0.182635182233));+#5231=CIRCLE('',#5232,1.E-01);+#5232=AXIS2_PLACEMENT_3D('',#5211,#2424,#2425);+#5233=ORIENTED_EDGE('',*,*,#5234,.T.);+#5234=EDGE_CURVE('',#5229,#5235,#5237,.T.);+#5235=VERTEX_POINT('',#5236);+#5236=CARTESIAN_POINT('',(1.09,7.396961550602,0.684729635533));+#5237=LINE('',#5230,#2431);+#5238=ORIENTED_EDGE('',*,*,#5239,.T.);+#5239=EDGE_CURVE('',#5235,#1081,#5240,.T.);+#5240=CIRCLE('',#5241,0.2);+#5241=AXIS2_PLACEMENT_3D('',#5199,#14,#2437);+#5242=PLANE('',#5243);+#5243=AXIS2_PLACEMENT_3D('',#5244,#452,#13);+#5244=CARTESIAN_POINT('',(1.09,7.414276639233,0.410238158856));+#5245=ADVANCED_FACE('',(#5246),#5253,.T.);+#5246=FACE_BOUND('',#5247,.F.);+#5247=EDGE_LOOP('',(#5248,#5238,#5251,#5252));+#5248=ORIENTED_EDGE('',*,*,#5249,.T.);+#5249=EDGE_CURVE('',#5167,#5235,#5250,.T.);+#5250=LINE('',#5168,#451);+#5251=ORIENTED_EDGE('',*,*,#1080,.F.);+#5252=ORIENTED_EDGE('',*,*,#5171,.F.);+#5253=CYLINDRICAL_SURFACE('',#5254,0.2);+#5254=AXIS2_PLACEMENT_3D('',#5131,#2386,#2437);+#5255=ADVANCED_FACE('',(#5256),#2365,.F.);+#5256=FACE_BOUND('',#5257,.F.);+#5257=EDGE_LOOP('',(#5181,#5258,#5262,#5266));+#5258=ORIENTED_EDGE('',*,*,#5259,.T.);+#5259=EDGE_CURVE('',#5183,#5260,#2359,.T.);+#5260=VERTEX_POINT('',#5261);+#5261=CARTESIAN_POINT('',(1.31,7.,0.75));+#5262=ORIENTED_EDGE('',*,*,#5263,.T.);+#5263=EDGE_CURVE('',#5260,#1101,#5264,.T.);+#5264=LINE('',#5265,#2043);+#5265=CARTESIAN_POINT('',(1.31,7.,0.630119079428));+#5266=ORIENTED_EDGE('',*,*,#1100,.F.);+#5267=ADVANCED_FACE('',(#5268),#5327,.F.);+#5268=FACE_BOUND('',#5269,.F.);+#5269=EDGE_LOOP('',(#5270,#5271,#5277,#5284,#5289,#5296,#5301,#5306,#5311,#5317,#5322,#5326));+#5270=ORIENTED_EDGE('',*,*,#5263,.F.);+#5271=ORIENTED_EDGE('',*,*,#5272,.T.);+#5272=EDGE_CURVE('',#5260,#5273,#5275,.T.);+#5273=VERTEX_POINT('',#5274);+#5274=CARTESIAN_POINT('',(1.31,7.2,0.75));+#5275=LINE('',#5276,#2377);+#5276=CARTESIAN_POINT('',(1.31,6.85,0.75));+#5277=ORIENTED_EDGE('',*,*,#5278,.T.);+#5278=EDGE_CURVE('',#5273,#5279,#5281,.T.);+#5279=VERTEX_POINT('',#5280);+#5280=CARTESIAN_POINT('',(1.31,7.298480775301,0.667364817767));+#5281=CIRCLE('',#5282,0.1);+#5282=AXIS2_PLACEMENT_3D('',#5283,#2386,#2387);+#5283=CARTESIAN_POINT('',(1.31,7.2,0.65));+#5284=ORIENTED_EDGE('',*,*,#5285,.T.);+#5285=EDGE_CURVE('',#5279,#5286,#5288,.T.);+#5286=VERTEX_POINT('',#5287);+#5287=CARTESIAN_POINT('',(1.31,7.382385590716,0.165270364467));+#5288=LINE('',#5280,#2393);+#5289=ORIENTED_EDGE('',*,*,#5290,.T.);+#5290=EDGE_CURVE('',#5286,#5291,#5293,.T.);+#5291=VERTEX_POINT('',#5292);+#5292=CARTESIAN_POINT('',(1.31,7.579347141319,1.387778780781E-16));+#5293=CIRCLE('',#5294,0.2);+#5294=AXIS2_PLACEMENT_3D('',#5295,#452,#2402);+#5295=CARTESIAN_POINT('',(1.31,7.579347141319,0.2));+#5296=ORIENTED_EDGE('',*,*,#5297,.T.);+#5297=EDGE_CURVE('',#5291,#5298,#5300,.T.);+#5298=VERTEX_POINT('',#5299);+#5299=CARTESIAN_POINT('',(1.31,8.,1.387778780781E-16));+#5300=LINE('',#5292,#2377);+#5301=ORIENTED_EDGE('',*,*,#5302,.T.);+#5302=EDGE_CURVE('',#5298,#5303,#5305,.T.);+#5303=VERTEX_POINT('',#5304);+#5304=CARTESIAN_POINT('',(1.31,8.,0.1));+#5305=LINE('',#5299,#2043);+#5306=ORIENTED_EDGE('',*,*,#5307,.T.);+#5307=EDGE_CURVE('',#5303,#5308,#5310,.T.);+#5308=VERTEX_POINT('',#5309);+#5309=CARTESIAN_POINT('',(1.31,7.579347141319,0.1));+#5310=LINE('',#5304,#407);+#5311=ORIENTED_EDGE('',*,*,#5312,.T.);+#5312=EDGE_CURVE('',#5308,#5313,#5315,.T.);+#5313=VERTEX_POINT('',#5314);+#5314=CARTESIAN_POINT('',(1.31,7.480866366018,0.182635182233));+#5315=CIRCLE('',#5316,1.E-01);+#5316=AXIS2_PLACEMENT_3D('',#5295,#2424,#2425);+#5317=ORIENTED_EDGE('',*,*,#5318,.T.);+#5318=EDGE_CURVE('',#5313,#5319,#5321,.T.);+#5319=VERTEX_POINT('',#5320);+#5320=CARTESIAN_POINT('',(1.31,7.396961550602,0.684729635533));+#5321=LINE('',#5314,#2431);+#5322=ORIENTED_EDGE('',*,*,#5323,.T.);+#5323=EDGE_CURVE('',#5319,#1113,#5324,.T.);+#5324=CIRCLE('',#5325,0.2);+#5325=AXIS2_PLACEMENT_3D('',#5283,#14,#2437);+#5326=ORIENTED_EDGE('',*,*,#1112,.T.);+#5327=PLANE('',#5328);+#5328=AXIS2_PLACEMENT_3D('',#5329,#452,#13);+#5329=CARTESIAN_POINT('',(1.31,7.414276639233,0.410238158856));+#5330=ADVANCED_FACE('',(#5331),#5394,.T.);+#5331=FACE_BOUND('',#5332,.T.);+#5332=EDGE_LOOP('',(#5333,#5339,#5345,#5352,#5357,#5364,#5369,#5374,#5379,#5385,#5390,#1119));+#5333=ORIENTED_EDGE('',*,*,#5334,.F.);+#5334=EDGE_CURVE('',#5335,#1121,#5337,.T.);+#5335=VERTEX_POINT('',#5336);+#5336=CARTESIAN_POINT('',(1.49,7.,0.75));+#5337=LINE('',#5338,#2043);+#5338=CARTESIAN_POINT('',(1.49,7.,0.630119079428));+#5339=ORIENTED_EDGE('',*,*,#5340,.T.);+#5340=EDGE_CURVE('',#5335,#5341,#5343,.T.);+#5341=VERTEX_POINT('',#5342);+#5342=CARTESIAN_POINT('',(1.49,7.2,0.75));+#5343=LINE('',#5344,#2377);+#5344=CARTESIAN_POINT('',(1.49,6.85,0.75));+#5345=ORIENTED_EDGE('',*,*,#5346,.T.);+#5346=EDGE_CURVE('',#5341,#5347,#5349,.T.);+#5347=VERTEX_POINT('',#5348);+#5348=CARTESIAN_POINT('',(1.49,7.298480775301,0.667364817767));+#5349=CIRCLE('',#5350,0.1);+#5350=AXIS2_PLACEMENT_3D('',#5351,#2386,#2387);+#5351=CARTESIAN_POINT('',(1.49,7.2,0.65));+#5352=ORIENTED_EDGE('',*,*,#5353,.T.);+#5353=EDGE_CURVE('',#5347,#5354,#5356,.T.);+#5354=VERTEX_POINT('',#5355);+#5355=CARTESIAN_POINT('',(1.49,7.382385590716,0.165270364467));+#5356=LINE('',#5348,#2393);+#5357=ORIENTED_EDGE('',*,*,#5358,.T.);+#5358=EDGE_CURVE('',#5354,#5359,#5361,.T.);+#5359=VERTEX_POINT('',#5360);+#5360=CARTESIAN_POINT('',(1.49,7.579347141319,1.387778780781E-16));+#5361=CIRCLE('',#5362,0.2);+#5362=AXIS2_PLACEMENT_3D('',#5363,#452,#2402);+#5363=CARTESIAN_POINT('',(1.49,7.579347141319,0.2));+#5364=ORIENTED_EDGE('',*,*,#5365,.T.);+#5365=EDGE_CURVE('',#5359,#5366,#5368,.T.);+#5366=VERTEX_POINT('',#5367);+#5367=CARTESIAN_POINT('',(1.49,8.,1.387778780781E-16));+#5368=LINE('',#5360,#2377);+#5369=ORIENTED_EDGE('',*,*,#5370,.T.);+#5370=EDGE_CURVE('',#5366,#5371,#5373,.T.);+#5371=VERTEX_POINT('',#5372);+#5372=CARTESIAN_POINT('',(1.49,8.,0.1));+#5373=LINE('',#5367,#2043);+#5374=ORIENTED_EDGE('',*,*,#5375,.T.);+#5375=EDGE_CURVE('',#5371,#5376,#5378,.T.);+#5376=VERTEX_POINT('',#5377);+#5377=CARTESIAN_POINT('',(1.49,7.579347141319,0.1));+#5378=LINE('',#5372,#407);+#5379=ORIENTED_EDGE('',*,*,#5380,.T.);+#5380=EDGE_CURVE('',#5376,#5381,#5383,.T.);+#5381=VERTEX_POINT('',#5382);+#5382=CARTESIAN_POINT('',(1.49,7.480866366018,0.182635182233));+#5383=CIRCLE('',#5384,1.E-01);+#5384=AXIS2_PLACEMENT_3D('',#5363,#2424,#2425);+#5385=ORIENTED_EDGE('',*,*,#5386,.T.);+#5386=EDGE_CURVE('',#5381,#5387,#5389,.T.);+#5387=VERTEX_POINT('',#5388);+#5388=CARTESIAN_POINT('',(1.49,7.396961550602,0.684729635533));+#5389=LINE('',#5382,#2431);+#5390=ORIENTED_EDGE('',*,*,#5391,.T.);+#5391=EDGE_CURVE('',#5387,#1116,#5392,.T.);+#5392=CIRCLE('',#5393,0.2);+#5393=AXIS2_PLACEMENT_3D('',#5351,#14,#2437);+#5394=PLANE('',#5395);+#5395=AXIS2_PLACEMENT_3D('',#5396,#452,#13);+#5396=CARTESIAN_POINT('',(1.49,7.414276639233,0.410238158856));+#5397=ADVANCED_FACE('',(#5398),#5405,.T.);+#5398=FACE_BOUND('',#5399,.F.);+#5399=EDGE_LOOP('',(#5400,#5390,#5403,#5404));+#5400=ORIENTED_EDGE('',*,*,#5401,.T.);+#5401=EDGE_CURVE('',#5319,#5387,#5402,.T.);+#5402=LINE('',#5320,#451);+#5403=ORIENTED_EDGE('',*,*,#1115,.F.);+#5404=ORIENTED_EDGE('',*,*,#5323,.F.);+#5405=CYLINDRICAL_SURFACE('',#5406,0.2);+#5406=AXIS2_PLACEMENT_3D('',#5283,#2386,#2437);+#5407=ADVANCED_FACE('',(#5408),#2365,.F.);+#5408=FACE_BOUND('',#5409,.F.);+#5409=EDGE_LOOP('',(#5333,#5410,#5414,#5418));+#5410=ORIENTED_EDGE('',*,*,#5411,.T.);+#5411=EDGE_CURVE('',#5335,#5412,#2359,.T.);+#5412=VERTEX_POINT('',#5413);+#5413=CARTESIAN_POINT('',(1.71,7.,0.75));+#5414=ORIENTED_EDGE('',*,*,#5415,.T.);+#5415=EDGE_CURVE('',#5412,#1136,#5416,.T.);+#5416=LINE('',#5417,#2043);+#5417=CARTESIAN_POINT('',(1.71,7.,0.630119079428));+#5418=ORIENTED_EDGE('',*,*,#1135,.F.);+#5419=ADVANCED_FACE('',(#5420),#5479,.F.);+#5420=FACE_BOUND('',#5421,.F.);+#5421=EDGE_LOOP('',(#5422,#5423,#5429,#5436,#5441,#5448,#5453,#5458,#5463,#5469,#5474,#5478));+#5422=ORIENTED_EDGE('',*,*,#5415,.F.);+#5423=ORIENTED_EDGE('',*,*,#5424,.T.);+#5424=EDGE_CURVE('',#5412,#5425,#5427,.T.);+#5425=VERTEX_POINT('',#5426);+#5426=CARTESIAN_POINT('',(1.71,7.2,0.75));+#5427=LINE('',#5428,#2377);+#5428=CARTESIAN_POINT('',(1.71,6.85,0.75));+#5429=ORIENTED_EDGE('',*,*,#5430,.T.);+#5430=EDGE_CURVE('',#5425,#5431,#5433,.T.);+#5431=VERTEX_POINT('',#5432);+#5432=CARTESIAN_POINT('',(1.71,7.298480775301,0.667364817767));+#5433=CIRCLE('',#5434,0.1);+#5434=AXIS2_PLACEMENT_3D('',#5435,#2386,#2387);+#5435=CARTESIAN_POINT('',(1.71,7.2,0.65));+#5436=ORIENTED_EDGE('',*,*,#5437,.T.);+#5437=EDGE_CURVE('',#5431,#5438,#5440,.T.);+#5438=VERTEX_POINT('',#5439);+#5439=CARTESIAN_POINT('',(1.71,7.382385590716,0.165270364467));+#5440=LINE('',#5432,#2393);+#5441=ORIENTED_EDGE('',*,*,#5442,.T.);+#5442=EDGE_CURVE('',#5438,#5443,#5445,.T.);+#5443=VERTEX_POINT('',#5444);+#5444=CARTESIAN_POINT('',(1.71,7.579347141319,1.387778780781E-16));+#5445=CIRCLE('',#5446,0.2);+#5446=AXIS2_PLACEMENT_3D('',#5447,#452,#2402);+#5447=CARTESIAN_POINT('',(1.71,7.579347141319,0.2));+#5448=ORIENTED_EDGE('',*,*,#5449,.T.);+#5449=EDGE_CURVE('',#5443,#5450,#5452,.T.);+#5450=VERTEX_POINT('',#5451);+#5451=CARTESIAN_POINT('',(1.71,8.,1.387778780781E-16));+#5452=LINE('',#5444,#2377);+#5453=ORIENTED_EDGE('',*,*,#5454,.T.);+#5454=EDGE_CURVE('',#5450,#5455,#5457,.T.);+#5455=VERTEX_POINT('',#5456);+#5456=CARTESIAN_POINT('',(1.71,8.,0.1));+#5457=LINE('',#5451,#2043);+#5458=ORIENTED_EDGE('',*,*,#5459,.T.);+#5459=EDGE_CURVE('',#5455,#5460,#5462,.T.);+#5460=VERTEX_POINT('',#5461);+#5461=CARTESIAN_POINT('',(1.71,7.579347141319,0.1));+#5462=LINE('',#5456,#407);+#5463=ORIENTED_EDGE('',*,*,#5464,.T.);+#5464=EDGE_CURVE('',#5460,#5465,#5467,.T.);+#5465=VERTEX_POINT('',#5466);+#5466=CARTESIAN_POINT('',(1.71,7.480866366018,0.182635182233));+#5467=CIRCLE('',#5468,1.E-01);+#5468=AXIS2_PLACEMENT_3D('',#5447,#2424,#2425);+#5469=ORIENTED_EDGE('',*,*,#5470,.T.);+#5470=EDGE_CURVE('',#5465,#5471,#5473,.T.);+#5471=VERTEX_POINT('',#5472);+#5472=CARTESIAN_POINT('',(1.71,7.396961550602,0.684729635533));+#5473=LINE('',#5466,#2431);+#5474=ORIENTED_EDGE('',*,*,#5475,.T.);+#5475=EDGE_CURVE('',#5471,#1148,#5476,.T.);+#5476=CIRCLE('',#5477,0.2);+#5477=AXIS2_PLACEMENT_3D('',#5435,#14,#2437);+#5478=ORIENTED_EDGE('',*,*,#1147,.T.);+#5479=PLANE('',#5480);+#5480=AXIS2_PLACEMENT_3D('',#5481,#452,#13);+#5481=CARTESIAN_POINT('',(1.71,7.414276639233,0.410238158856));+#5482=ADVANCED_FACE('',(#5483),#5546,.T.);+#5483=FACE_BOUND('',#5484,.T.);+#5484=EDGE_LOOP('',(#5485,#5491,#5497,#5504,#5509,#5516,#5521,#5526,#5531,#5537,#5542,#1154));+#5485=ORIENTED_EDGE('',*,*,#5486,.F.);+#5486=EDGE_CURVE('',#5487,#1156,#5489,.T.);+#5487=VERTEX_POINT('',#5488);+#5488=CARTESIAN_POINT('',(1.89,7.,0.75));+#5489=LINE('',#5490,#2043);+#5490=CARTESIAN_POINT('',(1.89,7.,0.630119079428));+#5491=ORIENTED_EDGE('',*,*,#5492,.T.);+#5492=EDGE_CURVE('',#5487,#5493,#5495,.T.);+#5493=VERTEX_POINT('',#5494);+#5494=CARTESIAN_POINT('',(1.89,7.2,0.75));+#5495=LINE('',#5496,#2377);+#5496=CARTESIAN_POINT('',(1.89,6.85,0.75));+#5497=ORIENTED_EDGE('',*,*,#5498,.T.);+#5498=EDGE_CURVE('',#5493,#5499,#5501,.T.);+#5499=VERTEX_POINT('',#5500);+#5500=CARTESIAN_POINT('',(1.89,7.298480775301,0.667364817767));+#5501=CIRCLE('',#5502,0.1);+#5502=AXIS2_PLACEMENT_3D('',#5503,#2386,#2387);+#5503=CARTESIAN_POINT('',(1.89,7.2,0.65));+#5504=ORIENTED_EDGE('',*,*,#5505,.T.);+#5505=EDGE_CURVE('',#5499,#5506,#5508,.T.);+#5506=VERTEX_POINT('',#5507);+#5507=CARTESIAN_POINT('',(1.89,7.382385590716,0.165270364467));+#5508=LINE('',#5500,#2393);+#5509=ORIENTED_EDGE('',*,*,#5510,.T.);+#5510=EDGE_CURVE('',#5506,#5511,#5513,.T.);+#5511=VERTEX_POINT('',#5512);+#5512=CARTESIAN_POINT('',(1.89,7.579347141319,1.387778780781E-16));+#5513=CIRCLE('',#5514,0.2);+#5514=AXIS2_PLACEMENT_3D('',#5515,#452,#2402);+#5515=CARTESIAN_POINT('',(1.89,7.579347141319,0.2));+#5516=ORIENTED_EDGE('',*,*,#5517,.T.);+#5517=EDGE_CURVE('',#5511,#5518,#5520,.T.);+#5518=VERTEX_POINT('',#5519);+#5519=CARTESIAN_POINT('',(1.89,8.,1.387778780781E-16));+#5520=LINE('',#5512,#2377);+#5521=ORIENTED_EDGE('',*,*,#5522,.T.);+#5522=EDGE_CURVE('',#5518,#5523,#5525,.T.);+#5523=VERTEX_POINT('',#5524);+#5524=CARTESIAN_POINT('',(1.89,8.,0.1));+#5525=LINE('',#5519,#2043);+#5526=ORIENTED_EDGE('',*,*,#5527,.T.);+#5527=EDGE_CURVE('',#5523,#5528,#5530,.T.);+#5528=VERTEX_POINT('',#5529);+#5529=CARTESIAN_POINT('',(1.89,7.579347141319,0.1));+#5530=LINE('',#5524,#407);+#5531=ORIENTED_EDGE('',*,*,#5532,.T.);+#5532=EDGE_CURVE('',#5528,#5533,#5535,.T.);+#5533=VERTEX_POINT('',#5534);+#5534=CARTESIAN_POINT('',(1.89,7.480866366018,0.182635182233));+#5535=CIRCLE('',#5536,1.E-01);+#5536=AXIS2_PLACEMENT_3D('',#5515,#2424,#2425);+#5537=ORIENTED_EDGE('',*,*,#5538,.T.);+#5538=EDGE_CURVE('',#5533,#5539,#5541,.T.);+#5539=VERTEX_POINT('',#5540);+#5540=CARTESIAN_POINT('',(1.89,7.396961550602,0.684729635533));+#5541=LINE('',#5534,#2431);+#5542=ORIENTED_EDGE('',*,*,#5543,.T.);+#5543=EDGE_CURVE('',#5539,#1151,#5544,.T.);+#5544=CIRCLE('',#5545,0.2);+#5545=AXIS2_PLACEMENT_3D('',#5503,#14,#2437);+#5546=PLANE('',#5547);+#5547=AXIS2_PLACEMENT_3D('',#5548,#452,#13);+#5548=CARTESIAN_POINT('',(1.89,7.414276639233,0.410238158856));+#5549=ADVANCED_FACE('',(#5550),#5557,.T.);+#5550=FACE_BOUND('',#5551,.F.);+#5551=EDGE_LOOP('',(#5552,#5542,#5555,#5556));+#5552=ORIENTED_EDGE('',*,*,#5553,.T.);+#5553=EDGE_CURVE('',#5471,#5539,#5554,.T.);+#5554=LINE('',#5472,#451);+#5555=ORIENTED_EDGE('',*,*,#1150,.F.);+#5556=ORIENTED_EDGE('',*,*,#5475,.F.);+#5557=CYLINDRICAL_SURFACE('',#5558,0.2);+#5558=AXIS2_PLACEMENT_3D('',#5435,#2386,#2437);+#5559=ADVANCED_FACE('',(#5560),#2365,.F.);+#5560=FACE_BOUND('',#5561,.F.);+#5561=EDGE_LOOP('',(#5485,#5562,#5566,#5570));+#5562=ORIENTED_EDGE('',*,*,#5563,.T.);+#5563=EDGE_CURVE('',#5487,#5564,#2359,.T.);+#5564=VERTEX_POINT('',#5565);+#5565=CARTESIAN_POINT('',(2.11,7.,0.75));+#5566=ORIENTED_EDGE('',*,*,#5567,.T.);+#5567=EDGE_CURVE('',#5564,#1171,#5568,.T.);+#5568=LINE('',#5569,#2043);+#5569=CARTESIAN_POINT('',(2.11,7.,0.630119079428));+#5570=ORIENTED_EDGE('',*,*,#1170,.F.);+#5571=ADVANCED_FACE('',(#5572),#5631,.F.);+#5572=FACE_BOUND('',#5573,.F.);+#5573=EDGE_LOOP('',(#5574,#5575,#5581,#5588,#5593,#5600,#5605,#5610,#5615,#5621,#5626,#5630));+#5574=ORIENTED_EDGE('',*,*,#5567,.F.);+#5575=ORIENTED_EDGE('',*,*,#5576,.T.);+#5576=EDGE_CURVE('',#5564,#5577,#5579,.T.);+#5577=VERTEX_POINT('',#5578);+#5578=CARTESIAN_POINT('',(2.11,7.2,0.75));+#5579=LINE('',#5580,#2377);+#5580=CARTESIAN_POINT('',(2.11,6.85,0.75));+#5581=ORIENTED_EDGE('',*,*,#5582,.T.);+#5582=EDGE_CURVE('',#5577,#5583,#5585,.T.);+#5583=VERTEX_POINT('',#5584);+#5584=CARTESIAN_POINT('',(2.11,7.298480775301,0.667364817767));+#5585=CIRCLE('',#5586,0.1);+#5586=AXIS2_PLACEMENT_3D('',#5587,#2386,#2387);+#5587=CARTESIAN_POINT('',(2.11,7.2,0.65));+#5588=ORIENTED_EDGE('',*,*,#5589,.T.);+#5589=EDGE_CURVE('',#5583,#5590,#5592,.T.);+#5590=VERTEX_POINT('',#5591);+#5591=CARTESIAN_POINT('',(2.11,7.382385590716,0.165270364467));+#5592=LINE('',#5584,#2393);+#5593=ORIENTED_EDGE('',*,*,#5594,.T.);+#5594=EDGE_CURVE('',#5590,#5595,#5597,.T.);+#5595=VERTEX_POINT('',#5596);+#5596=CARTESIAN_POINT('',(2.11,7.579347141319,1.387778780781E-16));+#5597=CIRCLE('',#5598,0.2);+#5598=AXIS2_PLACEMENT_3D('',#5599,#452,#2402);+#5599=CARTESIAN_POINT('',(2.11,7.579347141319,0.2));+#5600=ORIENTED_EDGE('',*,*,#5601,.T.);+#5601=EDGE_CURVE('',#5595,#5602,#5604,.T.);+#5602=VERTEX_POINT('',#5603);+#5603=CARTESIAN_POINT('',(2.11,8.,1.387778780781E-16));+#5604=LINE('',#5596,#2377);+#5605=ORIENTED_EDGE('',*,*,#5606,.T.);+#5606=EDGE_CURVE('',#5602,#5607,#5609,.T.);+#5607=VERTEX_POINT('',#5608);+#5608=CARTESIAN_POINT('',(2.11,8.,0.1));+#5609=LINE('',#5603,#2043);+#5610=ORIENTED_EDGE('',*,*,#5611,.T.);+#5611=EDGE_CURVE('',#5607,#5612,#5614,.T.);+#5612=VERTEX_POINT('',#5613);+#5613=CARTESIAN_POINT('',(2.11,7.579347141319,0.1));+#5614=LINE('',#5608,#407);+#5615=ORIENTED_EDGE('',*,*,#5616,.T.);+#5616=EDGE_CURVE('',#5612,#5617,#5619,.T.);+#5617=VERTEX_POINT('',#5618);+#5618=CARTESIAN_POINT('',(2.11,7.480866366018,0.182635182233));+#5619=CIRCLE('',#5620,1.E-01);+#5620=AXIS2_PLACEMENT_3D('',#5599,#2424,#2425);+#5621=ORIENTED_EDGE('',*,*,#5622,.T.);+#5622=EDGE_CURVE('',#5617,#5623,#5625,.T.);+#5623=VERTEX_POINT('',#5624);+#5624=CARTESIAN_POINT('',(2.11,7.396961550602,0.684729635533));+#5625=LINE('',#5618,#2431);+#5626=ORIENTED_EDGE('',*,*,#5627,.T.);+#5627=EDGE_CURVE('',#5623,#1183,#5628,.T.);+#5628=CIRCLE('',#5629,0.2);+#5629=AXIS2_PLACEMENT_3D('',#5587,#14,#2437);+#5630=ORIENTED_EDGE('',*,*,#1182,.T.);+#5631=PLANE('',#5632);+#5632=AXIS2_PLACEMENT_3D('',#5633,#452,#13);+#5633=CARTESIAN_POINT('',(2.11,7.414276639233,0.410238158856));+#5634=ADVANCED_FACE('',(#5635),#5698,.T.);+#5635=FACE_BOUND('',#5636,.T.);+#5636=EDGE_LOOP('',(#5637,#5643,#5649,#5656,#5661,#5668,#5673,#5678,#5683,#5689,#5694,#1189));+#5637=ORIENTED_EDGE('',*,*,#5638,.F.);+#5638=EDGE_CURVE('',#5639,#1191,#5641,.T.);+#5639=VERTEX_POINT('',#5640);+#5640=CARTESIAN_POINT('',(2.29,7.,0.75));+#5641=LINE('',#5642,#2043);+#5642=CARTESIAN_POINT('',(2.29,7.,0.630119079428));+#5643=ORIENTED_EDGE('',*,*,#5644,.T.);+#5644=EDGE_CURVE('',#5639,#5645,#5647,.T.);+#5645=VERTEX_POINT('',#5646);+#5646=CARTESIAN_POINT('',(2.29,7.2,0.75));+#5647=LINE('',#5648,#2377);+#5648=CARTESIAN_POINT('',(2.29,6.85,0.75));+#5649=ORIENTED_EDGE('',*,*,#5650,.T.);+#5650=EDGE_CURVE('',#5645,#5651,#5653,.T.);+#5651=VERTEX_POINT('',#5652);+#5652=CARTESIAN_POINT('',(2.29,7.298480775301,0.667364817767));+#5653=CIRCLE('',#5654,0.1);+#5654=AXIS2_PLACEMENT_3D('',#5655,#2386,#2387);+#5655=CARTESIAN_POINT('',(2.29,7.2,0.65));+#5656=ORIENTED_EDGE('',*,*,#5657,.T.);+#5657=EDGE_CURVE('',#5651,#5658,#5660,.T.);+#5658=VERTEX_POINT('',#5659);+#5659=CARTESIAN_POINT('',(2.29,7.382385590716,0.165270364467));+#5660=LINE('',#5652,#2393);+#5661=ORIENTED_EDGE('',*,*,#5662,.T.);+#5662=EDGE_CURVE('',#5658,#5663,#5665,.T.);+#5663=VERTEX_POINT('',#5664);+#5664=CARTESIAN_POINT('',(2.29,7.579347141319,1.387778780781E-16));+#5665=CIRCLE('',#5666,0.2);+#5666=AXIS2_PLACEMENT_3D('',#5667,#452,#2402);+#5667=CARTESIAN_POINT('',(2.29,7.579347141319,0.2));+#5668=ORIENTED_EDGE('',*,*,#5669,.T.);+#5669=EDGE_CURVE('',#5663,#5670,#5672,.T.);+#5670=VERTEX_POINT('',#5671);+#5671=CARTESIAN_POINT('',(2.29,8.,1.387778780781E-16));+#5672=LINE('',#5664,#2377);+#5673=ORIENTED_EDGE('',*,*,#5674,.T.);+#5674=EDGE_CURVE('',#5670,#5675,#5677,.T.);+#5675=VERTEX_POINT('',#5676);+#5676=CARTESIAN_POINT('',(2.29,8.,0.1));+#5677=LINE('',#5671,#2043);+#5678=ORIENTED_EDGE('',*,*,#5679,.T.);+#5679=EDGE_CURVE('',#5675,#5680,#5682,.T.);+#5680=VERTEX_POINT('',#5681);+#5681=CARTESIAN_POINT('',(2.29,7.579347141319,0.1));+#5682=LINE('',#5676,#407);+#5683=ORIENTED_EDGE('',*,*,#5684,.T.);+#5684=EDGE_CURVE('',#5680,#5685,#5687,.T.);+#5685=VERTEX_POINT('',#5686);+#5686=CARTESIAN_POINT('',(2.29,7.480866366018,0.182635182233));+#5687=CIRCLE('',#5688,1.E-01);+#5688=AXIS2_PLACEMENT_3D('',#5667,#2424,#2425);+#5689=ORIENTED_EDGE('',*,*,#5690,.T.);+#5690=EDGE_CURVE('',#5685,#5691,#5693,.T.);+#5691=VERTEX_POINT('',#5692);+#5692=CARTESIAN_POINT('',(2.29,7.396961550602,0.684729635533));+#5693=LINE('',#5686,#2431);+#5694=ORIENTED_EDGE('',*,*,#5695,.T.);+#5695=EDGE_CURVE('',#5691,#1186,#5696,.T.);+#5696=CIRCLE('',#5697,0.2);+#5697=AXIS2_PLACEMENT_3D('',#5655,#14,#2437);+#5698=PLANE('',#5699);+#5699=AXIS2_PLACEMENT_3D('',#5700,#452,#13);+#5700=CARTESIAN_POINT('',(2.29,7.414276639233,0.410238158856));+#5701=ADVANCED_FACE('',(#5702),#5709,.T.);+#5702=FACE_BOUND('',#5703,.F.);+#5703=EDGE_LOOP('',(#5704,#5694,#5707,#5708));+#5704=ORIENTED_EDGE('',*,*,#5705,.T.);+#5705=EDGE_CURVE('',#5623,#5691,#5706,.T.);+#5706=LINE('',#5624,#451);+#5707=ORIENTED_EDGE('',*,*,#1185,.F.);+#5708=ORIENTED_EDGE('',*,*,#5627,.F.);+#5709=CYLINDRICAL_SURFACE('',#5710,0.2);+#5710=AXIS2_PLACEMENT_3D('',#5587,#2386,#2437);+#5711=ADVANCED_FACE('',(#5712),#2365,.F.);+#5712=FACE_BOUND('',#5713,.F.);+#5713=EDGE_LOOP('',(#5637,#5714,#5718,#5722));+#5714=ORIENTED_EDGE('',*,*,#5715,.T.);+#5715=EDGE_CURVE('',#5639,#5716,#2359,.T.);+#5716=VERTEX_POINT('',#5717);+#5717=CARTESIAN_POINT('',(2.51,7.,0.75));+#5718=ORIENTED_EDGE('',*,*,#5719,.T.);+#5719=EDGE_CURVE('',#5716,#1206,#5720,.T.);+#5720=LINE('',#5721,#2043);+#5721=CARTESIAN_POINT('',(2.51,7.,0.630119079428));+#5722=ORIENTED_EDGE('',*,*,#1205,.F.);+#5723=ADVANCED_FACE('',(#5724),#5783,.F.);+#5724=FACE_BOUND('',#5725,.F.);+#5725=EDGE_LOOP('',(#5726,#5727,#5733,#5740,#5745,#5752,#5757,#5762,#5767,#5773,#5778,#5782));+#5726=ORIENTED_EDGE('',*,*,#5719,.F.);+#5727=ORIENTED_EDGE('',*,*,#5728,.T.);+#5728=EDGE_CURVE('',#5716,#5729,#5731,.T.);+#5729=VERTEX_POINT('',#5730);+#5730=CARTESIAN_POINT('',(2.51,7.2,0.75));+#5731=LINE('',#5732,#2377);+#5732=CARTESIAN_POINT('',(2.51,6.85,0.75));+#5733=ORIENTED_EDGE('',*,*,#5734,.T.);+#5734=EDGE_CURVE('',#5729,#5735,#5737,.T.);+#5735=VERTEX_POINT('',#5736);+#5736=CARTESIAN_POINT('',(2.51,7.298480775301,0.667364817767));+#5737=CIRCLE('',#5738,0.1);+#5738=AXIS2_PLACEMENT_3D('',#5739,#2386,#2387);+#5739=CARTESIAN_POINT('',(2.51,7.2,0.65));+#5740=ORIENTED_EDGE('',*,*,#5741,.T.);+#5741=EDGE_CURVE('',#5735,#5742,#5744,.T.);+#5742=VERTEX_POINT('',#5743);+#5743=CARTESIAN_POINT('',(2.51,7.382385590716,0.165270364467));+#5744=LINE('',#5736,#2393);+#5745=ORIENTED_EDGE('',*,*,#5746,.T.);+#5746=EDGE_CURVE('',#5742,#5747,#5749,.T.);+#5747=VERTEX_POINT('',#5748);+#5748=CARTESIAN_POINT('',(2.51,7.579347141319,1.387778780781E-16));+#5749=CIRCLE('',#5750,0.2);+#5750=AXIS2_PLACEMENT_3D('',#5751,#452,#2402);+#5751=CARTESIAN_POINT('',(2.51,7.579347141319,0.2));+#5752=ORIENTED_EDGE('',*,*,#5753,.T.);+#5753=EDGE_CURVE('',#5747,#5754,#5756,.T.);+#5754=VERTEX_POINT('',#5755);+#5755=CARTESIAN_POINT('',(2.51,8.,1.387778780781E-16));+#5756=LINE('',#5748,#2377);+#5757=ORIENTED_EDGE('',*,*,#5758,.T.);+#5758=EDGE_CURVE('',#5754,#5759,#5761,.T.);+#5759=VERTEX_POINT('',#5760);+#5760=CARTESIAN_POINT('',(2.51,8.,0.1));+#5761=LINE('',#5755,#2043);+#5762=ORIENTED_EDGE('',*,*,#5763,.T.);+#5763=EDGE_CURVE('',#5759,#5764,#5766,.T.);+#5764=VERTEX_POINT('',#5765);+#5765=CARTESIAN_POINT('',(2.51,7.579347141319,0.1));+#5766=LINE('',#5760,#407);+#5767=ORIENTED_EDGE('',*,*,#5768,.T.);+#5768=EDGE_CURVE('',#5764,#5769,#5771,.T.);+#5769=VERTEX_POINT('',#5770);+#5770=CARTESIAN_POINT('',(2.51,7.480866366018,0.182635182233));+#5771=CIRCLE('',#5772,1.E-01);+#5772=AXIS2_PLACEMENT_3D('',#5751,#2424,#2425);+#5773=ORIENTED_EDGE('',*,*,#5774,.T.);+#5774=EDGE_CURVE('',#5769,#5775,#5777,.T.);+#5775=VERTEX_POINT('',#5776);+#5776=CARTESIAN_POINT('',(2.51,7.396961550602,0.684729635533));+#5777=LINE('',#5770,#2431);+#5778=ORIENTED_EDGE('',*,*,#5779,.T.);+#5779=EDGE_CURVE('',#5775,#1218,#5780,.T.);+#5780=CIRCLE('',#5781,0.2);+#5781=AXIS2_PLACEMENT_3D('',#5739,#14,#2437);+#5782=ORIENTED_EDGE('',*,*,#1217,.T.);+#5783=PLANE('',#5784);+#5784=AXIS2_PLACEMENT_3D('',#5785,#452,#13);+#5785=CARTESIAN_POINT('',(2.51,7.414276639233,0.410238158856));+#5786=ADVANCED_FACE('',(#5787),#5850,.T.);+#5787=FACE_BOUND('',#5788,.T.);+#5788=EDGE_LOOP('',(#5789,#5795,#5801,#5808,#5813,#5820,#5825,#5830,#5835,#5841,#5846,#1224));+#5789=ORIENTED_EDGE('',*,*,#5790,.F.);+#5790=EDGE_CURVE('',#5791,#1226,#5793,.T.);+#5791=VERTEX_POINT('',#5792);+#5792=CARTESIAN_POINT('',(2.69,7.,0.75));+#5793=LINE('',#5794,#2043);+#5794=CARTESIAN_POINT('',(2.69,7.,0.630119079428));+#5795=ORIENTED_EDGE('',*,*,#5796,.T.);+#5796=EDGE_CURVE('',#5791,#5797,#5799,.T.);+#5797=VERTEX_POINT('',#5798);+#5798=CARTESIAN_POINT('',(2.69,7.2,0.75));+#5799=LINE('',#5800,#2377);+#5800=CARTESIAN_POINT('',(2.69,6.85,0.75));+#5801=ORIENTED_EDGE('',*,*,#5802,.T.);+#5802=EDGE_CURVE('',#5797,#5803,#5805,.T.);+#5803=VERTEX_POINT('',#5804);+#5804=CARTESIAN_POINT('',(2.69,7.298480775301,0.667364817767));+#5805=CIRCLE('',#5806,0.1);+#5806=AXIS2_PLACEMENT_3D('',#5807,#2386,#2387);+#5807=CARTESIAN_POINT('',(2.69,7.2,0.65));+#5808=ORIENTED_EDGE('',*,*,#5809,.T.);+#5809=EDGE_CURVE('',#5803,#5810,#5812,.T.);+#5810=VERTEX_POINT('',#5811);+#5811=CARTESIAN_POINT('',(2.69,7.382385590716,0.165270364467));+#5812=LINE('',#5804,#2393);+#5813=ORIENTED_EDGE('',*,*,#5814,.T.);+#5814=EDGE_CURVE('',#5810,#5815,#5817,.T.);+#5815=VERTEX_POINT('',#5816);+#5816=CARTESIAN_POINT('',(2.69,7.579347141319,1.387778780781E-16));+#5817=CIRCLE('',#5818,0.2);+#5818=AXIS2_PLACEMENT_3D('',#5819,#452,#2402);+#5819=CARTESIAN_POINT('',(2.69,7.579347141319,0.2));+#5820=ORIENTED_EDGE('',*,*,#5821,.T.);+#5821=EDGE_CURVE('',#5815,#5822,#5824,.T.);+#5822=VERTEX_POINT('',#5823);+#5823=CARTESIAN_POINT('',(2.69,8.,1.387778780781E-16));+#5824=LINE('',#5816,#2377);+#5825=ORIENTED_EDGE('',*,*,#5826,.T.);+#5826=EDGE_CURVE('',#5822,#5827,#5829,.T.);+#5827=VERTEX_POINT('',#5828);+#5828=CARTESIAN_POINT('',(2.69,8.,0.1));+#5829=LINE('',#5823,#2043);+#5830=ORIENTED_EDGE('',*,*,#5831,.T.);+#5831=EDGE_CURVE('',#5827,#5832,#5834,.T.);+#5832=VERTEX_POINT('',#5833);+#5833=CARTESIAN_POINT('',(2.69,7.579347141319,0.1));+#5834=LINE('',#5828,#407);+#5835=ORIENTED_EDGE('',*,*,#5836,.T.);+#5836=EDGE_CURVE('',#5832,#5837,#5839,.T.);+#5837=VERTEX_POINT('',#5838);+#5838=CARTESIAN_POINT('',(2.69,7.480866366018,0.182635182233));+#5839=CIRCLE('',#5840,1.E-01);+#5840=AXIS2_PLACEMENT_3D('',#5819,#2424,#2425);+#5841=ORIENTED_EDGE('',*,*,#5842,.T.);+#5842=EDGE_CURVE('',#5837,#5843,#5845,.T.);+#5843=VERTEX_POINT('',#5844);+#5844=CARTESIAN_POINT('',(2.69,7.396961550602,0.684729635533));+#5845=LINE('',#5838,#2431);+#5846=ORIENTED_EDGE('',*,*,#5847,.T.);+#5847=EDGE_CURVE('',#5843,#1221,#5848,.T.);+#5848=CIRCLE('',#5849,0.2);+#5849=AXIS2_PLACEMENT_3D('',#5807,#14,#2437);+#5850=PLANE('',#5851);+#5851=AXIS2_PLACEMENT_3D('',#5852,#452,#13);+#5852=CARTESIAN_POINT('',(2.69,7.414276639233,0.410238158856));+#5853=ADVANCED_FACE('',(#5854),#5861,.T.);+#5854=FACE_BOUND('',#5855,.F.);+#5855=EDGE_LOOP('',(#5856,#5846,#5859,#5860));+#5856=ORIENTED_EDGE('',*,*,#5857,.T.);+#5857=EDGE_CURVE('',#5775,#5843,#5858,.T.);+#5858=LINE('',#5776,#451);+#5859=ORIENTED_EDGE('',*,*,#1220,.F.);+#5860=ORIENTED_EDGE('',*,*,#5779,.F.);+#5861=CYLINDRICAL_SURFACE('',#5862,0.2);+#5862=AXIS2_PLACEMENT_3D('',#5739,#2386,#2437);+#5863=ADVANCED_FACE('',(#5864),#2365,.F.);+#5864=FACE_BOUND('',#5865,.F.);+#5865=EDGE_LOOP('',(#5789,#5866,#5870,#5874));+#5866=ORIENTED_EDGE('',*,*,#5867,.T.);+#5867=EDGE_CURVE('',#5791,#5868,#2359,.T.);+#5868=VERTEX_POINT('',#5869);+#5869=CARTESIAN_POINT('',(2.91,7.,0.75));+#5870=ORIENTED_EDGE('',*,*,#5871,.T.);+#5871=EDGE_CURVE('',#5868,#1241,#5872,.T.);+#5872=LINE('',#5873,#2043);+#5873=CARTESIAN_POINT('',(2.91,7.,0.630119079428));+#5874=ORIENTED_EDGE('',*,*,#1240,.F.);+#5875=ADVANCED_FACE('',(#5876),#5935,.F.);+#5876=FACE_BOUND('',#5877,.F.);+#5877=EDGE_LOOP('',(#5878,#5879,#5885,#5892,#5897,#5904,#5909,#5914,#5919,#5925,#5930,#5934));+#5878=ORIENTED_EDGE('',*,*,#5871,.F.);+#5879=ORIENTED_EDGE('',*,*,#5880,.T.);+#5880=EDGE_CURVE('',#5868,#5881,#5883,.T.);+#5881=VERTEX_POINT('',#5882);+#5882=CARTESIAN_POINT('',(2.91,7.2,0.75));+#5883=LINE('',#5884,#2377);+#5884=CARTESIAN_POINT('',(2.91,6.85,0.75));+#5885=ORIENTED_EDGE('',*,*,#5886,.T.);+#5886=EDGE_CURVE('',#5881,#5887,#5889,.T.);+#5887=VERTEX_POINT('',#5888);+#5888=CARTESIAN_POINT('',(2.91,7.298480775301,0.667364817767));+#5889=CIRCLE('',#5890,0.1);+#5890=AXIS2_PLACEMENT_3D('',#5891,#2386,#2387);+#5891=CARTESIAN_POINT('',(2.91,7.2,0.65));+#5892=ORIENTED_EDGE('',*,*,#5893,.T.);+#5893=EDGE_CURVE('',#5887,#5894,#5896,.T.);+#5894=VERTEX_POINT('',#5895);+#5895=CARTESIAN_POINT('',(2.91,7.382385590716,0.165270364467));+#5896=LINE('',#5888,#2393);+#5897=ORIENTED_EDGE('',*,*,#5898,.T.);+#5898=EDGE_CURVE('',#5894,#5899,#5901,.T.);+#5899=VERTEX_POINT('',#5900);+#5900=CARTESIAN_POINT('',(2.91,7.579347141319,1.387778780781E-16));+#5901=CIRCLE('',#5902,0.2);+#5902=AXIS2_PLACEMENT_3D('',#5903,#452,#2402);+#5903=CARTESIAN_POINT('',(2.91,7.579347141319,0.2));+#5904=ORIENTED_EDGE('',*,*,#5905,.T.);+#5905=EDGE_CURVE('',#5899,#5906,#5908,.T.);+#5906=VERTEX_POINT('',#5907);+#5907=CARTESIAN_POINT('',(2.91,8.,1.387778780781E-16));+#5908=LINE('',#5900,#2377);+#5909=ORIENTED_EDGE('',*,*,#5910,.T.);+#5910=EDGE_CURVE('',#5906,#5911,#5913,.T.);+#5911=VERTEX_POINT('',#5912);+#5912=CARTESIAN_POINT('',(2.91,8.,0.1));+#5913=LINE('',#5907,#2043);+#5914=ORIENTED_EDGE('',*,*,#5915,.T.);+#5915=EDGE_CURVE('',#5911,#5916,#5918,.T.);+#5916=VERTEX_POINT('',#5917);+#5917=CARTESIAN_POINT('',(2.91,7.579347141319,0.1));+#5918=LINE('',#5912,#407);+#5919=ORIENTED_EDGE('',*,*,#5920,.T.);+#5920=EDGE_CURVE('',#5916,#5921,#5923,.T.);+#5921=VERTEX_POINT('',#5922);+#5922=CARTESIAN_POINT('',(2.91,7.480866366018,0.182635182233));+#5923=CIRCLE('',#5924,1.E-01);+#5924=AXIS2_PLACEMENT_3D('',#5903,#2424,#2425);+#5925=ORIENTED_EDGE('',*,*,#5926,.T.);+#5926=EDGE_CURVE('',#5921,#5927,#5929,.T.);+#5927=VERTEX_POINT('',#5928);+#5928=CARTESIAN_POINT('',(2.91,7.396961550602,0.684729635533));+#5929=LINE('',#5922,#2431);+#5930=ORIENTED_EDGE('',*,*,#5931,.T.);+#5931=EDGE_CURVE('',#5927,#1253,#5932,.T.);+#5932=CIRCLE('',#5933,0.2);+#5933=AXIS2_PLACEMENT_3D('',#5891,#14,#2437);+#5934=ORIENTED_EDGE('',*,*,#1252,.T.);+#5935=PLANE('',#5936);+#5936=AXIS2_PLACEMENT_3D('',#5937,#452,#13);+#5937=CARTESIAN_POINT('',(2.91,7.414276639233,0.410238158856));+#5938=ADVANCED_FACE('',(#5939),#6002,.T.);+#5939=FACE_BOUND('',#5940,.T.);+#5940=EDGE_LOOP('',(#5941,#5947,#5953,#5960,#5965,#5972,#5977,#5982,#5987,#5993,#5998,#1259));+#5941=ORIENTED_EDGE('',*,*,#5942,.F.);+#5942=EDGE_CURVE('',#5943,#1261,#5945,.T.);+#5943=VERTEX_POINT('',#5944);+#5944=CARTESIAN_POINT('',(3.09,7.,0.75));+#5945=LINE('',#5946,#2043);+#5946=CARTESIAN_POINT('',(3.09,7.,0.630119079428));+#5947=ORIENTED_EDGE('',*,*,#5948,.T.);+#5948=EDGE_CURVE('',#5943,#5949,#5951,.T.);+#5949=VERTEX_POINT('',#5950);+#5950=CARTESIAN_POINT('',(3.09,7.2,0.75));+#5951=LINE('',#5952,#2377);+#5952=CARTESIAN_POINT('',(3.09,6.85,0.75));+#5953=ORIENTED_EDGE('',*,*,#5954,.T.);+#5954=EDGE_CURVE('',#5949,#5955,#5957,.T.);+#5955=VERTEX_POINT('',#5956);+#5956=CARTESIAN_POINT('',(3.09,7.298480775301,0.667364817767));+#5957=CIRCLE('',#5958,0.1);+#5958=AXIS2_PLACEMENT_3D('',#5959,#2386,#2387);+#5959=CARTESIAN_POINT('',(3.09,7.2,0.65));+#5960=ORIENTED_EDGE('',*,*,#5961,.T.);+#5961=EDGE_CURVE('',#5955,#5962,#5964,.T.);+#5962=VERTEX_POINT('',#5963);+#5963=CARTESIAN_POINT('',(3.09,7.382385590716,0.165270364467));+#5964=LINE('',#5956,#2393);+#5965=ORIENTED_EDGE('',*,*,#5966,.T.);+#5966=EDGE_CURVE('',#5962,#5967,#5969,.T.);+#5967=VERTEX_POINT('',#5968);+#5968=CARTESIAN_POINT('',(3.09,7.579347141319,1.387778780781E-16));+#5969=CIRCLE('',#5970,0.2);+#5970=AXIS2_PLACEMENT_3D('',#5971,#452,#2402);+#5971=CARTESIAN_POINT('',(3.09,7.579347141319,0.2));+#5972=ORIENTED_EDGE('',*,*,#5973,.T.);+#5973=EDGE_CURVE('',#5967,#5974,#5976,.T.);+#5974=VERTEX_POINT('',#5975);+#5975=CARTESIAN_POINT('',(3.09,8.,1.387778780781E-16));+#5976=LINE('',#5968,#2377);+#5977=ORIENTED_EDGE('',*,*,#5978,.T.);+#5978=EDGE_CURVE('',#5974,#5979,#5981,.T.);+#5979=VERTEX_POINT('',#5980);+#5980=CARTESIAN_POINT('',(3.09,8.,0.1));+#5981=LINE('',#5975,#2043);+#5982=ORIENTED_EDGE('',*,*,#5983,.T.);+#5983=EDGE_CURVE('',#5979,#5984,#5986,.T.);+#5984=VERTEX_POINT('',#5985);+#5985=CARTESIAN_POINT('',(3.09,7.579347141319,0.1));+#5986=LINE('',#5980,#407);+#5987=ORIENTED_EDGE('',*,*,#5988,.T.);+#5988=EDGE_CURVE('',#5984,#5989,#5991,.T.);+#5989=VERTEX_POINT('',#5990);+#5990=CARTESIAN_POINT('',(3.09,7.480866366018,0.182635182233));+#5991=CIRCLE('',#5992,1.E-01);+#5992=AXIS2_PLACEMENT_3D('',#5971,#2424,#2425);+#5993=ORIENTED_EDGE('',*,*,#5994,.T.);+#5994=EDGE_CURVE('',#5989,#5995,#5997,.T.);+#5995=VERTEX_POINT('',#5996);+#5996=CARTESIAN_POINT('',(3.09,7.396961550602,0.684729635533));+#5997=LINE('',#5990,#2431);+#5998=ORIENTED_EDGE('',*,*,#5999,.T.);+#5999=EDGE_CURVE('',#5995,#1256,#6000,.T.);+#6000=CIRCLE('',#6001,0.2);+#6001=AXIS2_PLACEMENT_3D('',#5959,#14,#2437);+#6002=PLANE('',#6003);+#6003=AXIS2_PLACEMENT_3D('',#6004,#452,#13);+#6004=CARTESIAN_POINT('',(3.09,7.414276639233,0.410238158856));+#6005=ADVANCED_FACE('',(#6006),#6013,.T.);+#6006=FACE_BOUND('',#6007,.F.);+#6007=EDGE_LOOP('',(#6008,#5998,#6011,#6012));+#6008=ORIENTED_EDGE('',*,*,#6009,.T.);+#6009=EDGE_CURVE('',#5927,#5995,#6010,.T.);+#6010=LINE('',#5928,#451);+#6011=ORIENTED_EDGE('',*,*,#1255,.F.);+#6012=ORIENTED_EDGE('',*,*,#5931,.F.);+#6013=CYLINDRICAL_SURFACE('',#6014,0.2);+#6014=AXIS2_PLACEMENT_3D('',#5891,#2386,#2437);+#6015=ADVANCED_FACE('',(#6016),#2365,.F.);+#6016=FACE_BOUND('',#6017,.F.);+#6017=EDGE_LOOP('',(#5941,#6018,#6022,#6026));+#6018=ORIENTED_EDGE('',*,*,#6019,.T.);+#6019=EDGE_CURVE('',#5943,#6020,#2359,.T.);+#6020=VERTEX_POINT('',#6021);+#6021=CARTESIAN_POINT('',(3.31,7.,0.75));+#6022=ORIENTED_EDGE('',*,*,#6023,.T.);+#6023=EDGE_CURVE('',#6020,#1276,#6024,.T.);+#6024=LINE('',#6025,#2043);+#6025=CARTESIAN_POINT('',(3.31,7.,0.630119079428));+#6026=ORIENTED_EDGE('',*,*,#1275,.F.);+#6027=ADVANCED_FACE('',(#6028),#6087,.F.);+#6028=FACE_BOUND('',#6029,.F.);+#6029=EDGE_LOOP('',(#6030,#6031,#6037,#6044,#6049,#6056,#6061,#6066,#6071,#6077,#6082,#6086));+#6030=ORIENTED_EDGE('',*,*,#6023,.F.);+#6031=ORIENTED_EDGE('',*,*,#6032,.T.);+#6032=EDGE_CURVE('',#6020,#6033,#6035,.T.);+#6033=VERTEX_POINT('',#6034);+#6034=CARTESIAN_POINT('',(3.31,7.2,0.75));+#6035=LINE('',#6036,#2377);+#6036=CARTESIAN_POINT('',(3.31,6.85,0.75));+#6037=ORIENTED_EDGE('',*,*,#6038,.T.);+#6038=EDGE_CURVE('',#6033,#6039,#6041,.T.);+#6039=VERTEX_POINT('',#6040);+#6040=CARTESIAN_POINT('',(3.31,7.298480775301,0.667364817767));+#6041=CIRCLE('',#6042,0.1);+#6042=AXIS2_PLACEMENT_3D('',#6043,#2386,#2387);+#6043=CARTESIAN_POINT('',(3.31,7.2,0.65));+#6044=ORIENTED_EDGE('',*,*,#6045,.T.);+#6045=EDGE_CURVE('',#6039,#6046,#6048,.T.);+#6046=VERTEX_POINT('',#6047);+#6047=CARTESIAN_POINT('',(3.31,7.382385590716,0.165270364467));+#6048=LINE('',#6040,#2393);+#6049=ORIENTED_EDGE('',*,*,#6050,.T.);+#6050=EDGE_CURVE('',#6046,#6051,#6053,.T.);+#6051=VERTEX_POINT('',#6052);+#6052=CARTESIAN_POINT('',(3.31,7.579347141319,1.387778780781E-16));+#6053=CIRCLE('',#6054,0.2);+#6054=AXIS2_PLACEMENT_3D('',#6055,#452,#2402);+#6055=CARTESIAN_POINT('',(3.31,7.579347141319,0.2));+#6056=ORIENTED_EDGE('',*,*,#6057,.T.);+#6057=EDGE_CURVE('',#6051,#6058,#6060,.T.);+#6058=VERTEX_POINT('',#6059);+#6059=CARTESIAN_POINT('',(3.31,8.,1.387778780781E-16));+#6060=LINE('',#6052,#2377);+#6061=ORIENTED_EDGE('',*,*,#6062,.T.);+#6062=EDGE_CURVE('',#6058,#6063,#6065,.T.);+#6063=VERTEX_POINT('',#6064);+#6064=CARTESIAN_POINT('',(3.31,8.,0.1));+#6065=LINE('',#6059,#2043);+#6066=ORIENTED_EDGE('',*,*,#6067,.T.);+#6067=EDGE_CURVE('',#6063,#6068,#6070,.T.);+#6068=VERTEX_POINT('',#6069);+#6069=CARTESIAN_POINT('',(3.31,7.579347141319,0.1));+#6070=LINE('',#6064,#407);+#6071=ORIENTED_EDGE('',*,*,#6072,.T.);+#6072=EDGE_CURVE('',#6068,#6073,#6075,.T.);+#6073=VERTEX_POINT('',#6074);+#6074=CARTESIAN_POINT('',(3.31,7.480866366018,0.182635182233));+#6075=CIRCLE('',#6076,1.E-01);+#6076=AXIS2_PLACEMENT_3D('',#6055,#2424,#2425);+#6077=ORIENTED_EDGE('',*,*,#6078,.T.);+#6078=EDGE_CURVE('',#6073,#6079,#6081,.T.);+#6079=VERTEX_POINT('',#6080);+#6080=CARTESIAN_POINT('',(3.31,7.396961550602,0.684729635533));+#6081=LINE('',#6074,#2431);+#6082=ORIENTED_EDGE('',*,*,#6083,.T.);+#6083=EDGE_CURVE('',#6079,#1288,#6084,.T.);+#6084=CIRCLE('',#6085,0.2);+#6085=AXIS2_PLACEMENT_3D('',#6043,#14,#2437);+#6086=ORIENTED_EDGE('',*,*,#1287,.T.);+#6087=PLANE('',#6088);+#6088=AXIS2_PLACEMENT_3D('',#6089,#452,#13);+#6089=CARTESIAN_POINT('',(3.31,7.414276639233,0.410238158856));+#6090=ADVANCED_FACE('',(#6091),#6154,.T.);+#6091=FACE_BOUND('',#6092,.T.);+#6092=EDGE_LOOP('',(#6093,#6099,#6105,#6112,#6117,#6124,#6129,#6134,#6139,#6145,#6150,#1294));+#6093=ORIENTED_EDGE('',*,*,#6094,.F.);+#6094=EDGE_CURVE('',#6095,#1296,#6097,.T.);+#6095=VERTEX_POINT('',#6096);+#6096=CARTESIAN_POINT('',(3.49,7.,0.75));+#6097=LINE('',#6098,#2043);+#6098=CARTESIAN_POINT('',(3.49,7.,0.630119079428));+#6099=ORIENTED_EDGE('',*,*,#6100,.T.);+#6100=EDGE_CURVE('',#6095,#6101,#6103,.T.);+#6101=VERTEX_POINT('',#6102);+#6102=CARTESIAN_POINT('',(3.49,7.2,0.75));+#6103=LINE('',#6104,#2377);+#6104=CARTESIAN_POINT('',(3.49,6.85,0.75));+#6105=ORIENTED_EDGE('',*,*,#6106,.T.);+#6106=EDGE_CURVE('',#6101,#6107,#6109,.T.);+#6107=VERTEX_POINT('',#6108);+#6108=CARTESIAN_POINT('',(3.49,7.298480775301,0.667364817767));+#6109=CIRCLE('',#6110,0.1);+#6110=AXIS2_PLACEMENT_3D('',#6111,#2386,#2387);+#6111=CARTESIAN_POINT('',(3.49,7.2,0.65));+#6112=ORIENTED_EDGE('',*,*,#6113,.T.);+#6113=EDGE_CURVE('',#6107,#6114,#6116,.T.);+#6114=VERTEX_POINT('',#6115);+#6115=CARTESIAN_POINT('',(3.49,7.382385590716,0.165270364467));+#6116=LINE('',#6108,#2393);+#6117=ORIENTED_EDGE('',*,*,#6118,.T.);+#6118=EDGE_CURVE('',#6114,#6119,#6121,.T.);+#6119=VERTEX_POINT('',#6120);+#6120=CARTESIAN_POINT('',(3.49,7.579347141319,1.387778780781E-16));+#6121=CIRCLE('',#6122,0.2);+#6122=AXIS2_PLACEMENT_3D('',#6123,#452,#2402);+#6123=CARTESIAN_POINT('',(3.49,7.579347141319,0.2));+#6124=ORIENTED_EDGE('',*,*,#6125,.T.);+#6125=EDGE_CURVE('',#6119,#6126,#6128,.T.);+#6126=VERTEX_POINT('',#6127);+#6127=CARTESIAN_POINT('',(3.49,8.,1.387778780781E-16));+#6128=LINE('',#6120,#2377);+#6129=ORIENTED_EDGE('',*,*,#6130,.T.);+#6130=EDGE_CURVE('',#6126,#6131,#6133,.T.);+#6131=VERTEX_POINT('',#6132);+#6132=CARTESIAN_POINT('',(3.49,8.,0.1));+#6133=LINE('',#6127,#2043);+#6134=ORIENTED_EDGE('',*,*,#6135,.T.);+#6135=EDGE_CURVE('',#6131,#6136,#6138,.T.);+#6136=VERTEX_POINT('',#6137);+#6137=CARTESIAN_POINT('',(3.49,7.579347141319,0.1));+#6138=LINE('',#6132,#407);+#6139=ORIENTED_EDGE('',*,*,#6140,.T.);+#6140=EDGE_CURVE('',#6136,#6141,#6143,.T.);+#6141=VERTEX_POINT('',#6142);+#6142=CARTESIAN_POINT('',(3.49,7.480866366018,0.182635182233));+#6143=CIRCLE('',#6144,1.E-01);+#6144=AXIS2_PLACEMENT_3D('',#6123,#2424,#2425);+#6145=ORIENTED_EDGE('',*,*,#6146,.T.);+#6146=EDGE_CURVE('',#6141,#6147,#6149,.T.);+#6147=VERTEX_POINT('',#6148);+#6148=CARTESIAN_POINT('',(3.49,7.396961550602,0.684729635533));+#6149=LINE('',#6142,#2431);+#6150=ORIENTED_EDGE('',*,*,#6151,.T.);+#6151=EDGE_CURVE('',#6147,#1291,#6152,.T.);+#6152=CIRCLE('',#6153,0.2);+#6153=AXIS2_PLACEMENT_3D('',#6111,#14,#2437);+#6154=PLANE('',#6155);+#6155=AXIS2_PLACEMENT_3D('',#6156,#452,#13);+#6156=CARTESIAN_POINT('',(3.49,7.414276639233,0.410238158856));+#6157=ADVANCED_FACE('',(#6158),#6165,.T.);+#6158=FACE_BOUND('',#6159,.F.);+#6159=EDGE_LOOP('',(#6160,#6150,#6163,#6164));+#6160=ORIENTED_EDGE('',*,*,#6161,.T.);+#6161=EDGE_CURVE('',#6079,#6147,#6162,.T.);+#6162=LINE('',#6080,#451);+#6163=ORIENTED_EDGE('',*,*,#1290,.F.);+#6164=ORIENTED_EDGE('',*,*,#6083,.F.);+#6165=CYLINDRICAL_SURFACE('',#6166,0.2);+#6166=AXIS2_PLACEMENT_3D('',#6043,#2386,#2437);+#6167=ADVANCED_FACE('',(#6168),#2365,.F.);+#6168=FACE_BOUND('',#6169,.F.);+#6169=EDGE_LOOP('',(#6093,#6170,#6174,#6178));+#6170=ORIENTED_EDGE('',*,*,#6171,.T.);+#6171=EDGE_CURVE('',#6095,#6172,#2359,.T.);+#6172=VERTEX_POINT('',#6173);+#6173=CARTESIAN_POINT('',(3.71,7.,0.75));+#6174=ORIENTED_EDGE('',*,*,#6175,.T.);+#6175=EDGE_CURVE('',#6172,#1311,#6176,.T.);+#6176=LINE('',#6177,#2043);+#6177=CARTESIAN_POINT('',(3.71,7.,0.630119079428));+#6178=ORIENTED_EDGE('',*,*,#1310,.F.);+#6179=ADVANCED_FACE('',(#6180),#6239,.F.);+#6180=FACE_BOUND('',#6181,.F.);+#6181=EDGE_LOOP('',(#6182,#6183,#6189,#6196,#6201,#6208,#6213,#6218,#6223,#6229,#6234,#6238));+#6182=ORIENTED_EDGE('',*,*,#6175,.F.);+#6183=ORIENTED_EDGE('',*,*,#6184,.T.);+#6184=EDGE_CURVE('',#6172,#6185,#6187,.T.);+#6185=VERTEX_POINT('',#6186);+#6186=CARTESIAN_POINT('',(3.71,7.2,0.75));+#6187=LINE('',#6188,#2377);+#6188=CARTESIAN_POINT('',(3.71,6.85,0.75));+#6189=ORIENTED_EDGE('',*,*,#6190,.T.);+#6190=EDGE_CURVE('',#6185,#6191,#6193,.T.);+#6191=VERTEX_POINT('',#6192);+#6192=CARTESIAN_POINT('',(3.71,7.298480775301,0.667364817767));+#6193=CIRCLE('',#6194,0.1);+#6194=AXIS2_PLACEMENT_3D('',#6195,#2386,#2387);+#6195=CARTESIAN_POINT('',(3.71,7.2,0.65));+#6196=ORIENTED_EDGE('',*,*,#6197,.T.);+#6197=EDGE_CURVE('',#6191,#6198,#6200,.T.);+#6198=VERTEX_POINT('',#6199);+#6199=CARTESIAN_POINT('',(3.71,7.382385590716,0.165270364467));+#6200=LINE('',#6192,#2393);+#6201=ORIENTED_EDGE('',*,*,#6202,.T.);+#6202=EDGE_CURVE('',#6198,#6203,#6205,.T.);+#6203=VERTEX_POINT('',#6204);+#6204=CARTESIAN_POINT('',(3.71,7.579347141319,1.387778780781E-16));+#6205=CIRCLE('',#6206,0.2);+#6206=AXIS2_PLACEMENT_3D('',#6207,#452,#2402);+#6207=CARTESIAN_POINT('',(3.71,7.579347141319,0.2));+#6208=ORIENTED_EDGE('',*,*,#6209,.T.);+#6209=EDGE_CURVE('',#6203,#6210,#6212,.T.);+#6210=VERTEX_POINT('',#6211);+#6211=CARTESIAN_POINT('',(3.71,8.,1.387778780781E-16));+#6212=LINE('',#6204,#2377);+#6213=ORIENTED_EDGE('',*,*,#6214,.T.);+#6214=EDGE_CURVE('',#6210,#6215,#6217,.T.);+#6215=VERTEX_POINT('',#6216);+#6216=CARTESIAN_POINT('',(3.71,8.,0.1));+#6217=LINE('',#6211,#2043);+#6218=ORIENTED_EDGE('',*,*,#6219,.T.);+#6219=EDGE_CURVE('',#6215,#6220,#6222,.T.);+#6220=VERTEX_POINT('',#6221);+#6221=CARTESIAN_POINT('',(3.71,7.579347141319,0.1));+#6222=LINE('',#6216,#407);+#6223=ORIENTED_EDGE('',*,*,#6224,.T.);+#6224=EDGE_CURVE('',#6220,#6225,#6227,.T.);+#6225=VERTEX_POINT('',#6226);+#6226=CARTESIAN_POINT('',(3.71,7.480866366018,0.182635182233));+#6227=CIRCLE('',#6228,1.E-01);+#6228=AXIS2_PLACEMENT_3D('',#6207,#2424,#2425);+#6229=ORIENTED_EDGE('',*,*,#6230,.T.);+#6230=EDGE_CURVE('',#6225,#6231,#6233,.T.);+#6231=VERTEX_POINT('',#6232);+#6232=CARTESIAN_POINT('',(3.71,7.396961550602,0.684729635533));+#6233=LINE('',#6226,#2431);+#6234=ORIENTED_EDGE('',*,*,#6235,.T.);+#6235=EDGE_CURVE('',#6231,#1323,#6236,.T.);+#6236=CIRCLE('',#6237,0.2);+#6237=AXIS2_PLACEMENT_3D('',#6195,#14,#2437);+#6238=ORIENTED_EDGE('',*,*,#1322,.T.);+#6239=PLANE('',#6240);+#6240=AXIS2_PLACEMENT_3D('',#6241,#452,#13);+#6241=CARTESIAN_POINT('',(3.71,7.414276639233,0.410238158856));+#6242=ADVANCED_FACE('',(#6243),#6306,.T.);+#6243=FACE_BOUND('',#6244,.T.);+#6244=EDGE_LOOP('',(#6245,#6251,#6257,#6264,#6269,#6276,#6281,#6286,#6291,#6297,#6302,#1329));+#6245=ORIENTED_EDGE('',*,*,#6246,.F.);+#6246=EDGE_CURVE('',#6247,#1331,#6249,.T.);+#6247=VERTEX_POINT('',#6248);+#6248=CARTESIAN_POINT('',(3.89,7.,0.75));+#6249=LINE('',#6250,#2043);+#6250=CARTESIAN_POINT('',(3.89,7.,0.630119079428));+#6251=ORIENTED_EDGE('',*,*,#6252,.T.);+#6252=EDGE_CURVE('',#6247,#6253,#6255,.T.);+#6253=VERTEX_POINT('',#6254);+#6254=CARTESIAN_POINT('',(3.89,7.2,0.75));+#6255=LINE('',#6256,#2377);+#6256=CARTESIAN_POINT('',(3.89,6.85,0.75));+#6257=ORIENTED_EDGE('',*,*,#6258,.T.);+#6258=EDGE_CURVE('',#6253,#6259,#6261,.T.);+#6259=VERTEX_POINT('',#6260);+#6260=CARTESIAN_POINT('',(3.89,7.298480775301,0.667364817767));+#6261=CIRCLE('',#6262,0.1);+#6262=AXIS2_PLACEMENT_3D('',#6263,#2386,#2387);+#6263=CARTESIAN_POINT('',(3.89,7.2,0.65));+#6264=ORIENTED_EDGE('',*,*,#6265,.T.);+#6265=EDGE_CURVE('',#6259,#6266,#6268,.T.);+#6266=VERTEX_POINT('',#6267);+#6267=CARTESIAN_POINT('',(3.89,7.382385590716,0.165270364467));+#6268=LINE('',#6260,#2393);+#6269=ORIENTED_EDGE('',*,*,#6270,.T.);+#6270=EDGE_CURVE('',#6266,#6271,#6273,.T.);+#6271=VERTEX_POINT('',#6272);+#6272=CARTESIAN_POINT('',(3.89,7.579347141319,1.387778780781E-16));+#6273=CIRCLE('',#6274,0.2);+#6274=AXIS2_PLACEMENT_3D('',#6275,#452,#2402);+#6275=CARTESIAN_POINT('',(3.89,7.579347141319,0.2));+#6276=ORIENTED_EDGE('',*,*,#6277,.T.);+#6277=EDGE_CURVE('',#6271,#6278,#6280,.T.);+#6278=VERTEX_POINT('',#6279);+#6279=CARTESIAN_POINT('',(3.89,8.,1.387778780781E-16));+#6280=LINE('',#6272,#2377);+#6281=ORIENTED_EDGE('',*,*,#6282,.T.);+#6282=EDGE_CURVE('',#6278,#6283,#6285,.T.);+#6283=VERTEX_POINT('',#6284);+#6284=CARTESIAN_POINT('',(3.89,8.,0.1));+#6285=LINE('',#6279,#2043);+#6286=ORIENTED_EDGE('',*,*,#6287,.T.);+#6287=EDGE_CURVE('',#6283,#6288,#6290,.T.);+#6288=VERTEX_POINT('',#6289);+#6289=CARTESIAN_POINT('',(3.89,7.579347141319,0.1));+#6290=LINE('',#6284,#407);+#6291=ORIENTED_EDGE('',*,*,#6292,.T.);+#6292=EDGE_CURVE('',#6288,#6293,#6295,.T.);+#6293=VERTEX_POINT('',#6294);+#6294=CARTESIAN_POINT('',(3.89,7.480866366018,0.182635182233));+#6295=CIRCLE('',#6296,1.E-01);+#6296=AXIS2_PLACEMENT_3D('',#6275,#2424,#2425);+#6297=ORIENTED_EDGE('',*,*,#6298,.T.);+#6298=EDGE_CURVE('',#6293,#6299,#6301,.T.);+#6299=VERTEX_POINT('',#6300);+#6300=CARTESIAN_POINT('',(3.89,7.396961550602,0.684729635533));+#6301=LINE('',#6294,#2431);+#6302=ORIENTED_EDGE('',*,*,#6303,.T.);+#6303=EDGE_CURVE('',#6299,#1326,#6304,.T.);+#6304=CIRCLE('',#6305,0.2);+#6305=AXIS2_PLACEMENT_3D('',#6263,#14,#2437);+#6306=PLANE('',#6307);+#6307=AXIS2_PLACEMENT_3D('',#6308,#452,#13);+#6308=CARTESIAN_POINT('',(3.89,7.414276639233,0.410238158856));+#6309=ADVANCED_FACE('',(#6310),#6317,.T.);+#6310=FACE_BOUND('',#6311,.F.);+#6311=EDGE_LOOP('',(#6312,#6302,#6315,#6316));+#6312=ORIENTED_EDGE('',*,*,#6313,.T.);+#6313=EDGE_CURVE('',#6231,#6299,#6314,.T.);+#6314=LINE('',#6232,#451);+#6315=ORIENTED_EDGE('',*,*,#1325,.F.);+#6316=ORIENTED_EDGE('',*,*,#6235,.F.);+#6317=CYLINDRICAL_SURFACE('',#6318,0.2);+#6318=AXIS2_PLACEMENT_3D('',#6195,#2386,#2437);+#6319=ADVANCED_FACE('',(#6320),#2365,.F.);+#6320=FACE_BOUND('',#6321,.F.);+#6321=EDGE_LOOP('',(#6245,#6322,#6326,#6330));+#6322=ORIENTED_EDGE('',*,*,#6323,.T.);+#6323=EDGE_CURVE('',#6247,#6324,#2359,.T.);+#6324=VERTEX_POINT('',#6325);+#6325=CARTESIAN_POINT('',(4.11,7.,0.75));+#6326=ORIENTED_EDGE('',*,*,#6327,.T.);+#6327=EDGE_CURVE('',#6324,#1346,#6328,.T.);+#6328=LINE('',#6329,#2043);+#6329=CARTESIAN_POINT('',(4.11,7.,0.630119079428));+#6330=ORIENTED_EDGE('',*,*,#1345,.F.);+#6331=ADVANCED_FACE('',(#6332),#6391,.F.);+#6332=FACE_BOUND('',#6333,.F.);+#6333=EDGE_LOOP('',(#6334,#6335,#6341,#6348,#6353,#6360,#6365,#6370,#6375,#6381,#6386,#6390));+#6334=ORIENTED_EDGE('',*,*,#6327,.F.);+#6335=ORIENTED_EDGE('',*,*,#6336,.T.);+#6336=EDGE_CURVE('',#6324,#6337,#6339,.T.);+#6337=VERTEX_POINT('',#6338);+#6338=CARTESIAN_POINT('',(4.11,7.2,0.75));+#6339=LINE('',#6340,#2377);+#6340=CARTESIAN_POINT('',(4.11,6.85,0.75));+#6341=ORIENTED_EDGE('',*,*,#6342,.T.);+#6342=EDGE_CURVE('',#6337,#6343,#6345,.T.);+#6343=VERTEX_POINT('',#6344);+#6344=CARTESIAN_POINT('',(4.11,7.298480775301,0.667364817767));+#6345=CIRCLE('',#6346,0.1);+#6346=AXIS2_PLACEMENT_3D('',#6347,#2386,#2387);+#6347=CARTESIAN_POINT('',(4.11,7.2,0.65));+#6348=ORIENTED_EDGE('',*,*,#6349,.T.);+#6349=EDGE_CURVE('',#6343,#6350,#6352,.T.);+#6350=VERTEX_POINT('',#6351);+#6351=CARTESIAN_POINT('',(4.11,7.382385590716,0.165270364467));+#6352=LINE('',#6344,#2393);+#6353=ORIENTED_EDGE('',*,*,#6354,.T.);+#6354=EDGE_CURVE('',#6350,#6355,#6357,.T.);+#6355=VERTEX_POINT('',#6356);+#6356=CARTESIAN_POINT('',(4.11,7.579347141319,1.387778780781E-16));+#6357=CIRCLE('',#6358,0.2);+#6358=AXIS2_PLACEMENT_3D('',#6359,#452,#2402);+#6359=CARTESIAN_POINT('',(4.11,7.579347141319,0.2));+#6360=ORIENTED_EDGE('',*,*,#6361,.T.);+#6361=EDGE_CURVE('',#6355,#6362,#6364,.T.);+#6362=VERTEX_POINT('',#6363);+#6363=CARTESIAN_POINT('',(4.11,8.,1.387778780781E-16));+#6364=LINE('',#6356,#2377);+#6365=ORIENTED_EDGE('',*,*,#6366,.T.);+#6366=EDGE_CURVE('',#6362,#6367,#6369,.T.);+#6367=VERTEX_POINT('',#6368);+#6368=CARTESIAN_POINT('',(4.11,8.,0.1));+#6369=LINE('',#6363,#2043);+#6370=ORIENTED_EDGE('',*,*,#6371,.T.);+#6371=EDGE_CURVE('',#6367,#6372,#6374,.T.);+#6372=VERTEX_POINT('',#6373);+#6373=CARTESIAN_POINT('',(4.11,7.579347141319,0.1));+#6374=LINE('',#6368,#407);+#6375=ORIENTED_EDGE('',*,*,#6376,.T.);+#6376=EDGE_CURVE('',#6372,#6377,#6379,.T.);+#6377=VERTEX_POINT('',#6378);+#6378=CARTESIAN_POINT('',(4.11,7.480866366018,0.182635182233));+#6379=CIRCLE('',#6380,1.E-01);+#6380=AXIS2_PLACEMENT_3D('',#6359,#2424,#2425);+#6381=ORIENTED_EDGE('',*,*,#6382,.T.);+#6382=EDGE_CURVE('',#6377,#6383,#6385,.T.);+#6383=VERTEX_POINT('',#6384);+#6384=CARTESIAN_POINT('',(4.11,7.396961550602,0.684729635533));+#6385=LINE('',#6378,#2431);+#6386=ORIENTED_EDGE('',*,*,#6387,.T.);+#6387=EDGE_CURVE('',#6383,#1358,#6388,.T.);+#6388=CIRCLE('',#6389,0.2);+#6389=AXIS2_PLACEMENT_3D('',#6347,#14,#2437);+#6390=ORIENTED_EDGE('',*,*,#1357,.T.);+#6391=PLANE('',#6392);+#6392=AXIS2_PLACEMENT_3D('',#6393,#452,#13);+#6393=CARTESIAN_POINT('',(4.11,7.414276639233,0.410238158856));+#6394=ADVANCED_FACE('',(#6395),#6458,.T.);+#6395=FACE_BOUND('',#6396,.T.);+#6396=EDGE_LOOP('',(#6397,#6403,#6409,#6416,#6421,#6428,#6433,#6438,#6443,#6449,#6454,#1364));+#6397=ORIENTED_EDGE('',*,*,#6398,.F.);+#6398=EDGE_CURVE('',#6399,#1366,#6401,.T.);+#6399=VERTEX_POINT('',#6400);+#6400=CARTESIAN_POINT('',(4.29,7.,0.75));+#6401=LINE('',#6402,#2043);+#6402=CARTESIAN_POINT('',(4.29,7.,0.630119079428));+#6403=ORIENTED_EDGE('',*,*,#6404,.T.);+#6404=EDGE_CURVE('',#6399,#6405,#6407,.T.);+#6405=VERTEX_POINT('',#6406);+#6406=CARTESIAN_POINT('',(4.29,7.2,0.75));+#6407=LINE('',#6408,#2377);+#6408=CARTESIAN_POINT('',(4.29,6.85,0.75));+#6409=ORIENTED_EDGE('',*,*,#6410,.T.);+#6410=EDGE_CURVE('',#6405,#6411,#6413,.T.);+#6411=VERTEX_POINT('',#6412);+#6412=CARTESIAN_POINT('',(4.29,7.298480775301,0.667364817767));+#6413=CIRCLE('',#6414,0.1);+#6414=AXIS2_PLACEMENT_3D('',#6415,#2386,#2387);+#6415=CARTESIAN_POINT('',(4.29,7.2,0.65));+#6416=ORIENTED_EDGE('',*,*,#6417,.T.);+#6417=EDGE_CURVE('',#6411,#6418,#6420,.T.);+#6418=VERTEX_POINT('',#6419);+#6419=CARTESIAN_POINT('',(4.29,7.382385590716,0.165270364467));+#6420=LINE('',#6412,#2393);+#6421=ORIENTED_EDGE('',*,*,#6422,.T.);+#6422=EDGE_CURVE('',#6418,#6423,#6425,.T.);+#6423=VERTEX_POINT('',#6424);+#6424=CARTESIAN_POINT('',(4.29,7.579347141319,1.387778780781E-16));+#6425=CIRCLE('',#6426,0.2);+#6426=AXIS2_PLACEMENT_3D('',#6427,#452,#2402);+#6427=CARTESIAN_POINT('',(4.29,7.579347141319,0.2));+#6428=ORIENTED_EDGE('',*,*,#6429,.T.);+#6429=EDGE_CURVE('',#6423,#6430,#6432,.T.);+#6430=VERTEX_POINT('',#6431);+#6431=CARTESIAN_POINT('',(4.29,8.,1.387778780781E-16));+#6432=LINE('',#6424,#2377);+#6433=ORIENTED_EDGE('',*,*,#6434,.T.);+#6434=EDGE_CURVE('',#6430,#6435,#6437,.T.);+#6435=VERTEX_POINT('',#6436);+#6436=CARTESIAN_POINT('',(4.29,8.,0.1));+#6437=LINE('',#6431,#2043);+#6438=ORIENTED_EDGE('',*,*,#6439,.T.);+#6439=EDGE_CURVE('',#6435,#6440,#6442,.T.);+#6440=VERTEX_POINT('',#6441);+#6441=CARTESIAN_POINT('',(4.29,7.579347141319,0.1));+#6442=LINE('',#6436,#407);+#6443=ORIENTED_EDGE('',*,*,#6444,.T.);+#6444=EDGE_CURVE('',#6440,#6445,#6447,.T.);+#6445=VERTEX_POINT('',#6446);+#6446=CARTESIAN_POINT('',(4.29,7.480866366018,0.182635182233));+#6447=CIRCLE('',#6448,1.E-01);+#6448=AXIS2_PLACEMENT_3D('',#6427,#2424,#2425);+#6449=ORIENTED_EDGE('',*,*,#6450,.T.);+#6450=EDGE_CURVE('',#6445,#6451,#6453,.T.);+#6451=VERTEX_POINT('',#6452);+#6452=CARTESIAN_POINT('',(4.29,7.396961550602,0.684729635533));+#6453=LINE('',#6446,#2431);+#6454=ORIENTED_EDGE('',*,*,#6455,.T.);+#6455=EDGE_CURVE('',#6451,#1361,#6456,.T.);+#6456=CIRCLE('',#6457,0.2);+#6457=AXIS2_PLACEMENT_3D('',#6415,#14,#2437);+#6458=PLANE('',#6459);+#6459=AXIS2_PLACEMENT_3D('',#6460,#452,#13);+#6460=CARTESIAN_POINT('',(4.29,7.414276639233,0.410238158856));+#6461=ADVANCED_FACE('',(#6462),#6469,.T.);+#6462=FACE_BOUND('',#6463,.F.);+#6463=EDGE_LOOP('',(#6464,#6454,#6467,#6468));+#6464=ORIENTED_EDGE('',*,*,#6465,.T.);+#6465=EDGE_CURVE('',#6383,#6451,#6466,.T.);+#6466=LINE('',#6384,#451);+#6467=ORIENTED_EDGE('',*,*,#1360,.F.);+#6468=ORIENTED_EDGE('',*,*,#6387,.F.);+#6469=CYLINDRICAL_SURFACE('',#6470,0.2);+#6470=AXIS2_PLACEMENT_3D('',#6347,#2386,#2437);+#6471=ADVANCED_FACE('',(#6472),#2365,.F.);+#6472=FACE_BOUND('',#6473,.F.);+#6473=EDGE_LOOP('',(#6397,#6474,#6478,#6482));+#6474=ORIENTED_EDGE('',*,*,#6475,.T.);+#6475=EDGE_CURVE('',#6399,#6476,#2359,.T.);+#6476=VERTEX_POINT('',#6477);+#6477=CARTESIAN_POINT('',(4.51,7.,0.75));+#6478=ORIENTED_EDGE('',*,*,#6479,.T.);+#6479=EDGE_CURVE('',#6476,#1381,#6480,.T.);+#6480=LINE('',#6481,#2043);+#6481=CARTESIAN_POINT('',(4.51,7.,0.630119079428));+#6482=ORIENTED_EDGE('',*,*,#1380,.F.);+#6483=ADVANCED_FACE('',(#6484),#6543,.F.);+#6484=FACE_BOUND('',#6485,.F.);+#6485=EDGE_LOOP('',(#6486,#6487,#6493,#6500,#6505,#6512,#6517,#6522,#6527,#6533,#6538,#6542));+#6486=ORIENTED_EDGE('',*,*,#6479,.F.);+#6487=ORIENTED_EDGE('',*,*,#6488,.T.);+#6488=EDGE_CURVE('',#6476,#6489,#6491,.T.);+#6489=VERTEX_POINT('',#6490);+#6490=CARTESIAN_POINT('',(4.51,7.2,0.75));+#6491=LINE('',#6492,#2377);+#6492=CARTESIAN_POINT('',(4.51,6.85,0.75));+#6493=ORIENTED_EDGE('',*,*,#6494,.T.);+#6494=EDGE_CURVE('',#6489,#6495,#6497,.T.);+#6495=VERTEX_POINT('',#6496);+#6496=CARTESIAN_POINT('',(4.51,7.298480775301,0.667364817767));+#6497=CIRCLE('',#6498,0.1);+#6498=AXIS2_PLACEMENT_3D('',#6499,#2386,#2387);+#6499=CARTESIAN_POINT('',(4.51,7.2,0.65));+#6500=ORIENTED_EDGE('',*,*,#6501,.T.);+#6501=EDGE_CURVE('',#6495,#6502,#6504,.T.);+#6502=VERTEX_POINT('',#6503);+#6503=CARTESIAN_POINT('',(4.51,7.382385590716,0.165270364467));+#6504=LINE('',#6496,#2393);+#6505=ORIENTED_EDGE('',*,*,#6506,.T.);+#6506=EDGE_CURVE('',#6502,#6507,#6509,.T.);+#6507=VERTEX_POINT('',#6508);+#6508=CARTESIAN_POINT('',(4.51,7.579347141319,1.387778780781E-16));+#6509=CIRCLE('',#6510,0.2);+#6510=AXIS2_PLACEMENT_3D('',#6511,#452,#2402);+#6511=CARTESIAN_POINT('',(4.51,7.579347141319,0.2));+#6512=ORIENTED_EDGE('',*,*,#6513,.T.);+#6513=EDGE_CURVE('',#6507,#6514,#6516,.T.);+#6514=VERTEX_POINT('',#6515);+#6515=CARTESIAN_POINT('',(4.51,8.,1.387778780781E-16));+#6516=LINE('',#6508,#2377);+#6517=ORIENTED_EDGE('',*,*,#6518,.T.);+#6518=EDGE_CURVE('',#6514,#6519,#6521,.T.);+#6519=VERTEX_POINT('',#6520);+#6520=CARTESIAN_POINT('',(4.51,8.,0.1));+#6521=LINE('',#6515,#2043);+#6522=ORIENTED_EDGE('',*,*,#6523,.T.);+#6523=EDGE_CURVE('',#6519,#6524,#6526,.T.);+#6524=VERTEX_POINT('',#6525);+#6525=CARTESIAN_POINT('',(4.51,7.579347141319,0.1));+#6526=LINE('',#6520,#407);+#6527=ORIENTED_EDGE('',*,*,#6528,.T.);+#6528=EDGE_CURVE('',#6524,#6529,#6531,.T.);+#6529=VERTEX_POINT('',#6530);+#6530=CARTESIAN_POINT('',(4.51,7.480866366018,0.182635182233));+#6531=CIRCLE('',#6532,1.E-01);+#6532=AXIS2_PLACEMENT_3D('',#6511,#2424,#2425);+#6533=ORIENTED_EDGE('',*,*,#6534,.T.);+#6534=EDGE_CURVE('',#6529,#6535,#6537,.T.);+#6535=VERTEX_POINT('',#6536);+#6536=CARTESIAN_POINT('',(4.51,7.396961550602,0.684729635533));+#6537=LINE('',#6530,#2431);+#6538=ORIENTED_EDGE('',*,*,#6539,.T.);+#6539=EDGE_CURVE('',#6535,#1393,#6540,.T.);+#6540=CIRCLE('',#6541,0.2);+#6541=AXIS2_PLACEMENT_3D('',#6499,#14,#2437);+#6542=ORIENTED_EDGE('',*,*,#1392,.T.);+#6543=PLANE('',#6544);+#6544=AXIS2_PLACEMENT_3D('',#6545,#452,#13);+#6545=CARTESIAN_POINT('',(4.51,7.414276639233,0.410238158856));+#6546=ADVANCED_FACE('',(#6547),#6610,.T.);+#6547=FACE_BOUND('',#6548,.T.);+#6548=EDGE_LOOP('',(#6549,#6555,#6561,#6568,#6573,#6580,#6585,#6590,#6595,#6601,#6606,#1399));+#6549=ORIENTED_EDGE('',*,*,#6550,.F.);+#6550=EDGE_CURVE('',#6551,#1401,#6553,.T.);+#6551=VERTEX_POINT('',#6552);+#6552=CARTESIAN_POINT('',(4.69,7.,0.75));+#6553=LINE('',#6554,#2043);+#6554=CARTESIAN_POINT('',(4.69,7.,0.630119079428));+#6555=ORIENTED_EDGE('',*,*,#6556,.T.);+#6556=EDGE_CURVE('',#6551,#6557,#6559,.T.);+#6557=VERTEX_POINT('',#6558);+#6558=CARTESIAN_POINT('',(4.69,7.2,0.75));+#6559=LINE('',#6560,#2377);+#6560=CARTESIAN_POINT('',(4.69,6.85,0.75));+#6561=ORIENTED_EDGE('',*,*,#6562,.T.);+#6562=EDGE_CURVE('',#6557,#6563,#6565,.T.);+#6563=VERTEX_POINT('',#6564);+#6564=CARTESIAN_POINT('',(4.69,7.298480775301,0.667364817767));+#6565=CIRCLE('',#6566,0.1);+#6566=AXIS2_PLACEMENT_3D('',#6567,#2386,#2387);+#6567=CARTESIAN_POINT('',(4.69,7.2,0.65));+#6568=ORIENTED_EDGE('',*,*,#6569,.T.);+#6569=EDGE_CURVE('',#6563,#6570,#6572,.T.);+#6570=VERTEX_POINT('',#6571);+#6571=CARTESIAN_POINT('',(4.69,7.382385590716,0.165270364467));+#6572=LINE('',#6564,#2393);+#6573=ORIENTED_EDGE('',*,*,#6574,.T.);+#6574=EDGE_CURVE('',#6570,#6575,#6577,.T.);+#6575=VERTEX_POINT('',#6576);+#6576=CARTESIAN_POINT('',(4.69,7.579347141319,1.387778780781E-16));+#6577=CIRCLE('',#6578,0.2);+#6578=AXIS2_PLACEMENT_3D('',#6579,#452,#2402);+#6579=CARTESIAN_POINT('',(4.69,7.579347141319,0.2));+#6580=ORIENTED_EDGE('',*,*,#6581,.T.);+#6581=EDGE_CURVE('',#6575,#6582,#6584,.T.);+#6582=VERTEX_POINT('',#6583);+#6583=CARTESIAN_POINT('',(4.69,8.,1.387778780781E-16));+#6584=LINE('',#6576,#2377);+#6585=ORIENTED_EDGE('',*,*,#6586,.T.);+#6586=EDGE_CURVE('',#6582,#6587,#6589,.T.);+#6587=VERTEX_POINT('',#6588);+#6588=CARTESIAN_POINT('',(4.69,8.,0.1));+#6589=LINE('',#6583,#2043);+#6590=ORIENTED_EDGE('',*,*,#6591,.T.);+#6591=EDGE_CURVE('',#6587,#6592,#6594,.T.);+#6592=VERTEX_POINT('',#6593);+#6593=CARTESIAN_POINT('',(4.69,7.579347141319,0.1));+#6594=LINE('',#6588,#407);+#6595=ORIENTED_EDGE('',*,*,#6596,.T.);+#6596=EDGE_CURVE('',#6592,#6597,#6599,.T.);+#6597=VERTEX_POINT('',#6598);+#6598=CARTESIAN_POINT('',(4.69,7.480866366018,0.182635182233));+#6599=CIRCLE('',#6600,1.E-01);+#6600=AXIS2_PLACEMENT_3D('',#6579,#2424,#2425);+#6601=ORIENTED_EDGE('',*,*,#6602,.T.);+#6602=EDGE_CURVE('',#6597,#6603,#6605,.T.);+#6603=VERTEX_POINT('',#6604);+#6604=CARTESIAN_POINT('',(4.69,7.396961550602,0.684729635533));+#6605=LINE('',#6598,#2431);+#6606=ORIENTED_EDGE('',*,*,#6607,.T.);+#6607=EDGE_CURVE('',#6603,#1396,#6608,.T.);+#6608=CIRCLE('',#6609,0.2);+#6609=AXIS2_PLACEMENT_3D('',#6567,#14,#2437);+#6610=PLANE('',#6611);+#6611=AXIS2_PLACEMENT_3D('',#6612,#452,#13);+#6612=CARTESIAN_POINT('',(4.69,7.414276639233,0.410238158856));+#6613=ADVANCED_FACE('',(#6614),#6621,.T.);+#6614=FACE_BOUND('',#6615,.F.);+#6615=EDGE_LOOP('',(#6616,#6606,#6619,#6620));+#6616=ORIENTED_EDGE('',*,*,#6617,.T.);+#6617=EDGE_CURVE('',#6535,#6603,#6618,.T.);+#6618=LINE('',#6536,#451);+#6619=ORIENTED_EDGE('',*,*,#1395,.F.);+#6620=ORIENTED_EDGE('',*,*,#6539,.F.);+#6621=CYLINDRICAL_SURFACE('',#6622,0.2);+#6622=AXIS2_PLACEMENT_3D('',#6499,#2386,#2437);+#6623=ADVANCED_FACE('',(#6624),#2365,.F.);+#6624=FACE_BOUND('',#6625,.F.);+#6625=EDGE_LOOP('',(#6549,#6626,#6630,#6634));+#6626=ORIENTED_EDGE('',*,*,#6627,.T.);+#6627=EDGE_CURVE('',#6551,#6628,#2359,.T.);+#6628=VERTEX_POINT('',#6629);+#6629=CARTESIAN_POINT('',(4.91,7.,0.75));+#6630=ORIENTED_EDGE('',*,*,#6631,.T.);+#6631=EDGE_CURVE('',#6628,#1416,#6632,.T.);+#6632=LINE('',#6633,#2043);+#6633=CARTESIAN_POINT('',(4.91,7.,0.630119079428));+#6634=ORIENTED_EDGE('',*,*,#1415,.F.);+#6635=ADVANCED_FACE('',(#6636),#6695,.F.);+#6636=FACE_BOUND('',#6637,.F.);+#6637=EDGE_LOOP('',(#6638,#6639,#6645,#6652,#6657,#6664,#6669,#6674,#6679,#6685,#6690,#6694));+#6638=ORIENTED_EDGE('',*,*,#6631,.F.);+#6639=ORIENTED_EDGE('',*,*,#6640,.T.);+#6640=EDGE_CURVE('',#6628,#6641,#6643,.T.);+#6641=VERTEX_POINT('',#6642);+#6642=CARTESIAN_POINT('',(4.91,7.2,0.75));+#6643=LINE('',#6644,#2377);+#6644=CARTESIAN_POINT('',(4.91,6.85,0.75));+#6645=ORIENTED_EDGE('',*,*,#6646,.T.);+#6646=EDGE_CURVE('',#6641,#6647,#6649,.T.);+#6647=VERTEX_POINT('',#6648);+#6648=CARTESIAN_POINT('',(4.91,7.298480775301,0.667364817767));+#6649=CIRCLE('',#6650,0.1);+#6650=AXIS2_PLACEMENT_3D('',#6651,#2386,#2387);+#6651=CARTESIAN_POINT('',(4.91,7.2,0.65));+#6652=ORIENTED_EDGE('',*,*,#6653,.T.);+#6653=EDGE_CURVE('',#6647,#6654,#6656,.T.);+#6654=VERTEX_POINT('',#6655);+#6655=CARTESIAN_POINT('',(4.91,7.382385590716,0.165270364467));+#6656=LINE('',#6648,#2393);+#6657=ORIENTED_EDGE('',*,*,#6658,.T.);+#6658=EDGE_CURVE('',#6654,#6659,#6661,.T.);+#6659=VERTEX_POINT('',#6660);+#6660=CARTESIAN_POINT('',(4.91,7.579347141319,1.387778780781E-16));+#6661=CIRCLE('',#6662,0.2);+#6662=AXIS2_PLACEMENT_3D('',#6663,#452,#2402);+#6663=CARTESIAN_POINT('',(4.91,7.579347141319,0.2));+#6664=ORIENTED_EDGE('',*,*,#6665,.T.);+#6665=EDGE_CURVE('',#6659,#6666,#6668,.T.);+#6666=VERTEX_POINT('',#6667);+#6667=CARTESIAN_POINT('',(4.91,8.,1.387778780781E-16));+#6668=LINE('',#6660,#2377);+#6669=ORIENTED_EDGE('',*,*,#6670,.T.);+#6670=EDGE_CURVE('',#6666,#6671,#6673,.T.);+#6671=VERTEX_POINT('',#6672);+#6672=CARTESIAN_POINT('',(4.91,8.,0.1));+#6673=LINE('',#6667,#2043);+#6674=ORIENTED_EDGE('',*,*,#6675,.T.);+#6675=EDGE_CURVE('',#6671,#6676,#6678,.T.);+#6676=VERTEX_POINT('',#6677);+#6677=CARTESIAN_POINT('',(4.91,7.579347141319,0.1));+#6678=LINE('',#6672,#407);+#6679=ORIENTED_EDGE('',*,*,#6680,.T.);+#6680=EDGE_CURVE('',#6676,#6681,#6683,.T.);+#6681=VERTEX_POINT('',#6682);+#6682=CARTESIAN_POINT('',(4.91,7.480866366018,0.182635182233));+#6683=CIRCLE('',#6684,1.E-01);+#6684=AXIS2_PLACEMENT_3D('',#6663,#2424,#2425);+#6685=ORIENTED_EDGE('',*,*,#6686,.T.);+#6686=EDGE_CURVE('',#6681,#6687,#6689,.T.);+#6687=VERTEX_POINT('',#6688);+#6688=CARTESIAN_POINT('',(4.91,7.396961550602,0.684729635533));+#6689=LINE('',#6682,#2431);+#6690=ORIENTED_EDGE('',*,*,#6691,.T.);+#6691=EDGE_CURVE('',#6687,#1428,#6692,.T.);+#6692=CIRCLE('',#6693,0.2);+#6693=AXIS2_PLACEMENT_3D('',#6651,#14,#2437);+#6694=ORIENTED_EDGE('',*,*,#1427,.T.);+#6695=PLANE('',#6696);+#6696=AXIS2_PLACEMENT_3D('',#6697,#452,#13);+#6697=CARTESIAN_POINT('',(4.91,7.414276639233,0.410238158856));+#6698=ADVANCED_FACE('',(#6699),#6762,.T.);+#6699=FACE_BOUND('',#6700,.T.);+#6700=EDGE_LOOP('',(#6701,#6707,#6713,#6720,#6725,#6732,#6737,#6742,#6747,#6753,#6758,#1434));+#6701=ORIENTED_EDGE('',*,*,#6702,.F.);+#6702=EDGE_CURVE('',#6703,#1436,#6705,.T.);+#6703=VERTEX_POINT('',#6704);+#6704=CARTESIAN_POINT('',(5.09,7.,0.75));+#6705=LINE('',#6706,#2043);+#6706=CARTESIAN_POINT('',(5.09,7.,0.630119079428));+#6707=ORIENTED_EDGE('',*,*,#6708,.T.);+#6708=EDGE_CURVE('',#6703,#6709,#6711,.T.);+#6709=VERTEX_POINT('',#6710);+#6710=CARTESIAN_POINT('',(5.09,7.2,0.75));+#6711=LINE('',#6712,#2377);+#6712=CARTESIAN_POINT('',(5.09,6.85,0.75));+#6713=ORIENTED_EDGE('',*,*,#6714,.T.);+#6714=EDGE_CURVE('',#6709,#6715,#6717,.T.);+#6715=VERTEX_POINT('',#6716);+#6716=CARTESIAN_POINT('',(5.09,7.298480775301,0.667364817767));+#6717=CIRCLE('',#6718,0.1);+#6718=AXIS2_PLACEMENT_3D('',#6719,#2386,#2387);+#6719=CARTESIAN_POINT('',(5.09,7.2,0.65));+#6720=ORIENTED_EDGE('',*,*,#6721,.T.);+#6721=EDGE_CURVE('',#6715,#6722,#6724,.T.);+#6722=VERTEX_POINT('',#6723);+#6723=CARTESIAN_POINT('',(5.09,7.382385590716,0.165270364467));+#6724=LINE('',#6716,#2393);+#6725=ORIENTED_EDGE('',*,*,#6726,.T.);+#6726=EDGE_CURVE('',#6722,#6727,#6729,.T.);+#6727=VERTEX_POINT('',#6728);+#6728=CARTESIAN_POINT('',(5.09,7.579347141319,1.387778780781E-16));+#6729=CIRCLE('',#6730,0.2);+#6730=AXIS2_PLACEMENT_3D('',#6731,#452,#2402);+#6731=CARTESIAN_POINT('',(5.09,7.579347141319,0.2));+#6732=ORIENTED_EDGE('',*,*,#6733,.T.);+#6733=EDGE_CURVE('',#6727,#6734,#6736,.T.);+#6734=VERTEX_POINT('',#6735);+#6735=CARTESIAN_POINT('',(5.09,8.,1.387778780781E-16));+#6736=LINE('',#6728,#2377);+#6737=ORIENTED_EDGE('',*,*,#6738,.T.);+#6738=EDGE_CURVE('',#6734,#6739,#6741,.T.);+#6739=VERTEX_POINT('',#6740);+#6740=CARTESIAN_POINT('',(5.09,8.,0.1));+#6741=LINE('',#6735,#2043);+#6742=ORIENTED_EDGE('',*,*,#6743,.T.);+#6743=EDGE_CURVE('',#6739,#6744,#6746,.T.);+#6744=VERTEX_POINT('',#6745);+#6745=CARTESIAN_POINT('',(5.09,7.579347141319,0.1));+#6746=LINE('',#6740,#407);+#6747=ORIENTED_EDGE('',*,*,#6748,.T.);+#6748=EDGE_CURVE('',#6744,#6749,#6751,.T.);+#6749=VERTEX_POINT('',#6750);+#6750=CARTESIAN_POINT('',(5.09,7.480866366018,0.182635182233));+#6751=CIRCLE('',#6752,1.E-01);+#6752=AXIS2_PLACEMENT_3D('',#6731,#2424,#2425);+#6753=ORIENTED_EDGE('',*,*,#6754,.T.);+#6754=EDGE_CURVE('',#6749,#6755,#6757,.T.);+#6755=VERTEX_POINT('',#6756);+#6756=CARTESIAN_POINT('',(5.09,7.396961550602,0.684729635533));+#6757=LINE('',#6750,#2431);+#6758=ORIENTED_EDGE('',*,*,#6759,.T.);+#6759=EDGE_CURVE('',#6755,#1431,#6760,.T.);+#6760=CIRCLE('',#6761,0.2);+#6761=AXIS2_PLACEMENT_3D('',#6719,#14,#2437);+#6762=PLANE('',#6763);+#6763=AXIS2_PLACEMENT_3D('',#6764,#452,#13);+#6764=CARTESIAN_POINT('',(5.09,7.414276639233,0.410238158856));+#6765=ADVANCED_FACE('',(#6766),#6773,.T.);+#6766=FACE_BOUND('',#6767,.F.);+#6767=EDGE_LOOP('',(#6768,#6758,#6771,#6772));+#6768=ORIENTED_EDGE('',*,*,#6769,.T.);+#6769=EDGE_CURVE('',#6687,#6755,#6770,.T.);+#6770=LINE('',#6688,#451);+#6771=ORIENTED_EDGE('',*,*,#1430,.F.);+#6772=ORIENTED_EDGE('',*,*,#6691,.F.);+#6773=CYLINDRICAL_SURFACE('',#6774,0.2);+#6774=AXIS2_PLACEMENT_3D('',#6651,#2386,#2437);+#6775=ADVANCED_FACE('',(#6776),#2365,.F.);+#6776=FACE_BOUND('',#6777,.F.);+#6777=EDGE_LOOP('',(#6701,#6778,#6782,#6786));+#6778=ORIENTED_EDGE('',*,*,#6779,.T.);+#6779=EDGE_CURVE('',#6703,#6780,#2359,.T.);+#6780=VERTEX_POINT('',#6781);+#6781=CARTESIAN_POINT('',(5.31,7.,0.75));+#6782=ORIENTED_EDGE('',*,*,#6783,.T.);+#6783=EDGE_CURVE('',#6780,#1451,#6784,.T.);+#6784=LINE('',#6785,#2043);+#6785=CARTESIAN_POINT('',(5.31,7.,0.630119079428));+#6786=ORIENTED_EDGE('',*,*,#1450,.F.);+#6787=ADVANCED_FACE('',(#6788),#6847,.F.);+#6788=FACE_BOUND('',#6789,.F.);+#6789=EDGE_LOOP('',(#6790,#6791,#6797,#6804,#6809,#6816,#6821,#6826,#6831,#6837,#6842,#6846));+#6790=ORIENTED_EDGE('',*,*,#6783,.F.);+#6791=ORIENTED_EDGE('',*,*,#6792,.T.);+#6792=EDGE_CURVE('',#6780,#6793,#6795,.T.);+#6793=VERTEX_POINT('',#6794);+#6794=CARTESIAN_POINT('',(5.31,7.2,0.75));+#6795=LINE('',#6796,#2377);+#6796=CARTESIAN_POINT('',(5.31,6.85,0.75));+#6797=ORIENTED_EDGE('',*,*,#6798,.T.);+#6798=EDGE_CURVE('',#6793,#6799,#6801,.T.);+#6799=VERTEX_POINT('',#6800);+#6800=CARTESIAN_POINT('',(5.31,7.298480775301,0.667364817767));+#6801=CIRCLE('',#6802,0.1);+#6802=AXIS2_PLACEMENT_3D('',#6803,#2386,#2387);+#6803=CARTESIAN_POINT('',(5.31,7.2,0.65));+#6804=ORIENTED_EDGE('',*,*,#6805,.T.);+#6805=EDGE_CURVE('',#6799,#6806,#6808,.T.);+#6806=VERTEX_POINT('',#6807);+#6807=CARTESIAN_POINT('',(5.31,7.382385590716,0.165270364467));+#6808=LINE('',#6800,#2393);+#6809=ORIENTED_EDGE('',*,*,#6810,.T.);+#6810=EDGE_CURVE('',#6806,#6811,#6813,.T.);+#6811=VERTEX_POINT('',#6812);+#6812=CARTESIAN_POINT('',(5.31,7.579347141319,1.387778780781E-16));+#6813=CIRCLE('',#6814,0.2);+#6814=AXIS2_PLACEMENT_3D('',#6815,#452,#2402);+#6815=CARTESIAN_POINT('',(5.31,7.579347141319,0.2));+#6816=ORIENTED_EDGE('',*,*,#6817,.T.);+#6817=EDGE_CURVE('',#6811,#6818,#6820,.T.);+#6818=VERTEX_POINT('',#6819);+#6819=CARTESIAN_POINT('',(5.31,8.,1.387778780781E-16));+#6820=LINE('',#6812,#2377);+#6821=ORIENTED_EDGE('',*,*,#6822,.T.);+#6822=EDGE_CURVE('',#6818,#6823,#6825,.T.);+#6823=VERTEX_POINT('',#6824);+#6824=CARTESIAN_POINT('',(5.31,8.,0.1));+#6825=LINE('',#6819,#2043);+#6826=ORIENTED_EDGE('',*,*,#6827,.T.);+#6827=EDGE_CURVE('',#6823,#6828,#6830,.T.);+#6828=VERTEX_POINT('',#6829);+#6829=CARTESIAN_POINT('',(5.31,7.579347141319,0.1));+#6830=LINE('',#6824,#407);+#6831=ORIENTED_EDGE('',*,*,#6832,.T.);+#6832=EDGE_CURVE('',#6828,#6833,#6835,.T.);+#6833=VERTEX_POINT('',#6834);+#6834=CARTESIAN_POINT('',(5.31,7.480866366018,0.182635182233));+#6835=CIRCLE('',#6836,1.E-01);+#6836=AXIS2_PLACEMENT_3D('',#6815,#2424,#2425);+#6837=ORIENTED_EDGE('',*,*,#6838,.T.);+#6838=EDGE_CURVE('',#6833,#6839,#6841,.T.);+#6839=VERTEX_POINT('',#6840);+#6840=CARTESIAN_POINT('',(5.31,7.396961550602,0.684729635533));+#6841=LINE('',#6834,#2431);+#6842=ORIENTED_EDGE('',*,*,#6843,.T.);+#6843=EDGE_CURVE('',#6839,#1463,#6844,.T.);+#6844=CIRCLE('',#6845,0.2);+#6845=AXIS2_PLACEMENT_3D('',#6803,#14,#2437);+#6846=ORIENTED_EDGE('',*,*,#1462,.T.);+#6847=PLANE('',#6848);+#6848=AXIS2_PLACEMENT_3D('',#6849,#452,#13);+#6849=CARTESIAN_POINT('',(5.31,7.414276639233,0.410238158856));+#6850=ADVANCED_FACE('',(#6851),#6914,.T.);+#6851=FACE_BOUND('',#6852,.T.);+#6852=EDGE_LOOP('',(#6853,#6859,#6865,#6872,#6877,#6884,#6889,#6894,#6899,#6905,#6910,#1469));+#6853=ORIENTED_EDGE('',*,*,#6854,.F.);+#6854=EDGE_CURVE('',#6855,#1471,#6857,.T.);+#6855=VERTEX_POINT('',#6856);+#6856=CARTESIAN_POINT('',(5.49,7.,0.75));+#6857=LINE('',#6858,#2043);+#6858=CARTESIAN_POINT('',(5.49,7.,0.630119079428));+#6859=ORIENTED_EDGE('',*,*,#6860,.T.);+#6860=EDGE_CURVE('',#6855,#6861,#6863,.T.);+#6861=VERTEX_POINT('',#6862);+#6862=CARTESIAN_POINT('',(5.49,7.2,0.75));+#6863=LINE('',#6864,#2377);+#6864=CARTESIAN_POINT('',(5.49,6.85,0.75));+#6865=ORIENTED_EDGE('',*,*,#6866,.T.);+#6866=EDGE_CURVE('',#6861,#6867,#6869,.T.);+#6867=VERTEX_POINT('',#6868);+#6868=CARTESIAN_POINT('',(5.49,7.298480775301,0.667364817767));+#6869=CIRCLE('',#6870,0.1);+#6870=AXIS2_PLACEMENT_3D('',#6871,#2386,#2387);+#6871=CARTESIAN_POINT('',(5.49,7.2,0.65));+#6872=ORIENTED_EDGE('',*,*,#6873,.T.);+#6873=EDGE_CURVE('',#6867,#6874,#6876,.T.);+#6874=VERTEX_POINT('',#6875);+#6875=CARTESIAN_POINT('',(5.49,7.382385590716,0.165270364467));+#6876=LINE('',#6868,#2393);+#6877=ORIENTED_EDGE('',*,*,#6878,.T.);+#6878=EDGE_CURVE('',#6874,#6879,#6881,.T.);+#6879=VERTEX_POINT('',#6880);+#6880=CARTESIAN_POINT('',(5.49,7.579347141319,1.387778780781E-16));+#6881=CIRCLE('',#6882,0.2);+#6882=AXIS2_PLACEMENT_3D('',#6883,#452,#2402);+#6883=CARTESIAN_POINT('',(5.49,7.579347141319,0.2));+#6884=ORIENTED_EDGE('',*,*,#6885,.T.);+#6885=EDGE_CURVE('',#6879,#6886,#6888,.T.);+#6886=VERTEX_POINT('',#6887);+#6887=CARTESIAN_POINT('',(5.49,8.,1.387778780781E-16));+#6888=LINE('',#6880,#2377);+#6889=ORIENTED_EDGE('',*,*,#6890,.T.);+#6890=EDGE_CURVE('',#6886,#6891,#6893,.T.);+#6891=VERTEX_POINT('',#6892);+#6892=CARTESIAN_POINT('',(5.49,8.,0.1));+#6893=LINE('',#6887,#2043);+#6894=ORIENTED_EDGE('',*,*,#6895,.T.);+#6895=EDGE_CURVE('',#6891,#6896,#6898,.T.);+#6896=VERTEX_POINT('',#6897);+#6897=CARTESIAN_POINT('',(5.49,7.579347141319,0.1));+#6898=LINE('',#6892,#407);+#6899=ORIENTED_EDGE('',*,*,#6900,.T.);+#6900=EDGE_CURVE('',#6896,#6901,#6903,.T.);+#6901=VERTEX_POINT('',#6902);+#6902=CARTESIAN_POINT('',(5.49,7.480866366018,0.182635182233));+#6903=CIRCLE('',#6904,1.E-01);+#6904=AXIS2_PLACEMENT_3D('',#6883,#2424,#2425);+#6905=ORIENTED_EDGE('',*,*,#6906,.T.);+#6906=EDGE_CURVE('',#6901,#6907,#6909,.T.);+#6907=VERTEX_POINT('',#6908);+#6908=CARTESIAN_POINT('',(5.49,7.396961550602,0.684729635533));+#6909=LINE('',#6902,#2431);+#6910=ORIENTED_EDGE('',*,*,#6911,.T.);+#6911=EDGE_CURVE('',#6907,#1466,#6912,.T.);+#6912=CIRCLE('',#6913,0.2);+#6913=AXIS2_PLACEMENT_3D('',#6871,#14,#2437);+#6914=PLANE('',#6915);+#6915=AXIS2_PLACEMENT_3D('',#6916,#452,#13);+#6916=CARTESIAN_POINT('',(5.49,7.414276639233,0.410238158856));+#6917=ADVANCED_FACE('',(#6918),#6925,.T.);+#6918=FACE_BOUND('',#6919,.F.);+#6919=EDGE_LOOP('',(#6920,#6910,#6923,#6924));+#6920=ORIENTED_EDGE('',*,*,#6921,.T.);+#6921=EDGE_CURVE('',#6839,#6907,#6922,.T.);+#6922=LINE('',#6840,#451);+#6923=ORIENTED_EDGE('',*,*,#1465,.F.);+#6924=ORIENTED_EDGE('',*,*,#6843,.F.);+#6925=CYLINDRICAL_SURFACE('',#6926,0.2);+#6926=AXIS2_PLACEMENT_3D('',#6803,#2386,#2437);+#6927=ADVANCED_FACE('',(#6928),#2365,.F.);+#6928=FACE_BOUND('',#6929,.F.);+#6929=EDGE_LOOP('',(#6853,#6930,#6934,#6938));+#6930=ORIENTED_EDGE('',*,*,#6931,.T.);+#6931=EDGE_CURVE('',#6855,#6932,#2359,.T.);+#6932=VERTEX_POINT('',#6933);+#6933=CARTESIAN_POINT('',(5.71,7.,0.75));+#6934=ORIENTED_EDGE('',*,*,#6935,.T.);+#6935=EDGE_CURVE('',#6932,#1486,#6936,.T.);+#6936=LINE('',#6937,#2043);+#6937=CARTESIAN_POINT('',(5.71,7.,0.630119079428));+#6938=ORIENTED_EDGE('',*,*,#1485,.F.);+#6939=ADVANCED_FACE('',(#6940),#6999,.F.);+#6940=FACE_BOUND('',#6941,.F.);+#6941=EDGE_LOOP('',(#6942,#6943,#6949,#6956,#6961,#6968,#6973,#6978,#6983,#6989,#6994,#6998));+#6942=ORIENTED_EDGE('',*,*,#6935,.F.);+#6943=ORIENTED_EDGE('',*,*,#6944,.T.);+#6944=EDGE_CURVE('',#6932,#6945,#6947,.T.);+#6945=VERTEX_POINT('',#6946);+#6946=CARTESIAN_POINT('',(5.71,7.2,0.75));+#6947=LINE('',#6948,#2377);+#6948=CARTESIAN_POINT('',(5.71,6.85,0.75));+#6949=ORIENTED_EDGE('',*,*,#6950,.T.);+#6950=EDGE_CURVE('',#6945,#6951,#6953,.T.);+#6951=VERTEX_POINT('',#6952);+#6952=CARTESIAN_POINT('',(5.71,7.298480775301,0.667364817767));+#6953=CIRCLE('',#6954,0.1);+#6954=AXIS2_PLACEMENT_3D('',#6955,#2386,#2387);+#6955=CARTESIAN_POINT('',(5.71,7.2,0.65));+#6956=ORIENTED_EDGE('',*,*,#6957,.T.);+#6957=EDGE_CURVE('',#6951,#6958,#6960,.T.);+#6958=VERTEX_POINT('',#6959);+#6959=CARTESIAN_POINT('',(5.71,7.382385590716,0.165270364467));+#6960=LINE('',#6952,#2393);+#6961=ORIENTED_EDGE('',*,*,#6962,.T.);+#6962=EDGE_CURVE('',#6958,#6963,#6965,.T.);+#6963=VERTEX_POINT('',#6964);+#6964=CARTESIAN_POINT('',(5.71,7.579347141319,1.387778780781E-16));+#6965=CIRCLE('',#6966,0.2);+#6966=AXIS2_PLACEMENT_3D('',#6967,#452,#2402);+#6967=CARTESIAN_POINT('',(5.71,7.579347141319,0.2));+#6968=ORIENTED_EDGE('',*,*,#6969,.T.);+#6969=EDGE_CURVE('',#6963,#6970,#6972,.T.);+#6970=VERTEX_POINT('',#6971);+#6971=CARTESIAN_POINT('',(5.71,8.,1.387778780781E-16));+#6972=LINE('',#6964,#2377);+#6973=ORIENTED_EDGE('',*,*,#6974,.T.);+#6974=EDGE_CURVE('',#6970,#6975,#6977,.T.);+#6975=VERTEX_POINT('',#6976);+#6976=CARTESIAN_POINT('',(5.71,8.,0.1));+#6977=LINE('',#6971,#2043);+#6978=ORIENTED_EDGE('',*,*,#6979,.T.);+#6979=EDGE_CURVE('',#6975,#6980,#6982,.T.);+#6980=VERTEX_POINT('',#6981);+#6981=CARTESIAN_POINT('',(5.71,7.579347141319,0.1));+#6982=LINE('',#6976,#407);+#6983=ORIENTED_EDGE('',*,*,#6984,.T.);+#6984=EDGE_CURVE('',#6980,#6985,#6987,.T.);+#6985=VERTEX_POINT('',#6986);+#6986=CARTESIAN_POINT('',(5.71,7.480866366018,0.182635182233));+#6987=CIRCLE('',#6988,1.E-01);+#6988=AXIS2_PLACEMENT_3D('',#6967,#2424,#2425);+#6989=ORIENTED_EDGE('',*,*,#6990,.T.);+#6990=EDGE_CURVE('',#6985,#6991,#6993,.T.);+#6991=VERTEX_POINT('',#6992);+#6992=CARTESIAN_POINT('',(5.71,7.396961550602,0.684729635533));+#6993=LINE('',#6986,#2431);+#6994=ORIENTED_EDGE('',*,*,#6995,.T.);+#6995=EDGE_CURVE('',#6991,#1498,#6996,.T.);+#6996=CIRCLE('',#6997,0.2);+#6997=AXIS2_PLACEMENT_3D('',#6955,#14,#2437);+#6998=ORIENTED_EDGE('',*,*,#1497,.T.);+#6999=PLANE('',#7000);+#7000=AXIS2_PLACEMENT_3D('',#7001,#452,#13);+#7001=CARTESIAN_POINT('',(5.71,7.414276639233,0.410238158856));+#7002=ADVANCED_FACE('',(#7003),#7066,.T.);+#7003=FACE_BOUND('',#7004,.T.);+#7004=EDGE_LOOP('',(#7005,#7011,#7017,#7024,#7029,#7036,#7041,#7046,#7051,#7057,#7062,#1504));+#7005=ORIENTED_EDGE('',*,*,#7006,.F.);+#7006=EDGE_CURVE('',#7007,#1506,#7009,.T.);+#7007=VERTEX_POINT('',#7008);+#7008=CARTESIAN_POINT('',(5.89,7.,0.75));+#7009=LINE('',#7010,#2043);+#7010=CARTESIAN_POINT('',(5.89,7.,0.630119079428));+#7011=ORIENTED_EDGE('',*,*,#7012,.T.);+#7012=EDGE_CURVE('',#7007,#7013,#7015,.T.);+#7013=VERTEX_POINT('',#7014);+#7014=CARTESIAN_POINT('',(5.89,7.2,0.75));+#7015=LINE('',#7016,#2377);+#7016=CARTESIAN_POINT('',(5.89,6.85,0.75));+#7017=ORIENTED_EDGE('',*,*,#7018,.T.);+#7018=EDGE_CURVE('',#7013,#7019,#7021,.T.);+#7019=VERTEX_POINT('',#7020);+#7020=CARTESIAN_POINT('',(5.89,7.298480775301,0.667364817767));+#7021=CIRCLE('',#7022,0.1);+#7022=AXIS2_PLACEMENT_3D('',#7023,#2386,#2387);+#7023=CARTESIAN_POINT('',(5.89,7.2,0.65));+#7024=ORIENTED_EDGE('',*,*,#7025,.T.);+#7025=EDGE_CURVE('',#7019,#7026,#7028,.T.);+#7026=VERTEX_POINT('',#7027);+#7027=CARTESIAN_POINT('',(5.89,7.382385590716,0.165270364467));+#7028=LINE('',#7020,#2393);+#7029=ORIENTED_EDGE('',*,*,#7030,.T.);+#7030=EDGE_CURVE('',#7026,#7031,#7033,.T.);+#7031=VERTEX_POINT('',#7032);+#7032=CARTESIAN_POINT('',(5.89,7.579347141319,1.387778780781E-16));+#7033=CIRCLE('',#7034,0.2);+#7034=AXIS2_PLACEMENT_3D('',#7035,#452,#2402);+#7035=CARTESIAN_POINT('',(5.89,7.579347141319,0.2));+#7036=ORIENTED_EDGE('',*,*,#7037,.T.);+#7037=EDGE_CURVE('',#7031,#7038,#7040,.T.);+#7038=VERTEX_POINT('',#7039);+#7039=CARTESIAN_POINT('',(5.89,8.,1.387778780781E-16));+#7040=LINE('',#7032,#2377);+#7041=ORIENTED_EDGE('',*,*,#7042,.T.);+#7042=EDGE_CURVE('',#7038,#7043,#7045,.T.);+#7043=VERTEX_POINT('',#7044);+#7044=CARTESIAN_POINT('',(5.89,8.,0.1));+#7045=LINE('',#7039,#2043);+#7046=ORIENTED_EDGE('',*,*,#7047,.T.);+#7047=EDGE_CURVE('',#7043,#7048,#7050,.T.);+#7048=VERTEX_POINT('',#7049);+#7049=CARTESIAN_POINT('',(5.89,7.579347141319,0.1));+#7050=LINE('',#7044,#407);+#7051=ORIENTED_EDGE('',*,*,#7052,.T.);+#7052=EDGE_CURVE('',#7048,#7053,#7055,.T.);+#7053=VERTEX_POINT('',#7054);+#7054=CARTESIAN_POINT('',(5.89,7.480866366018,0.182635182233));+#7055=CIRCLE('',#7056,1.E-01);+#7056=AXIS2_PLACEMENT_3D('',#7035,#2424,#2425);+#7057=ORIENTED_EDGE('',*,*,#7058,.T.);+#7058=EDGE_CURVE('',#7053,#7059,#7061,.T.);+#7059=VERTEX_POINT('',#7060);+#7060=CARTESIAN_POINT('',(5.89,7.396961550602,0.684729635533));+#7061=LINE('',#7054,#2431);+#7062=ORIENTED_EDGE('',*,*,#7063,.T.);+#7063=EDGE_CURVE('',#7059,#1501,#7064,.T.);+#7064=CIRCLE('',#7065,0.2);+#7065=AXIS2_PLACEMENT_3D('',#7023,#14,#2437);+#7066=PLANE('',#7067);+#7067=AXIS2_PLACEMENT_3D('',#7068,#452,#13);+#7068=CARTESIAN_POINT('',(5.89,7.414276639233,0.410238158856));+#7069=ADVANCED_FACE('',(#7070),#7077,.T.);+#7070=FACE_BOUND('',#7071,.F.);+#7071=EDGE_LOOP('',(#7072,#7062,#7075,#7076));+#7072=ORIENTED_EDGE('',*,*,#7073,.T.);+#7073=EDGE_CURVE('',#6991,#7059,#7074,.T.);+#7074=LINE('',#6992,#451);+#7075=ORIENTED_EDGE('',*,*,#1500,.F.);+#7076=ORIENTED_EDGE('',*,*,#6995,.F.);+#7077=CYLINDRICAL_SURFACE('',#7078,0.2);+#7078=AXIS2_PLACEMENT_3D('',#6955,#2386,#2437);+#7079=ADVANCED_FACE('',(#7080),#2365,.F.);+#7080=FACE_BOUND('',#7081,.F.);+#7081=EDGE_LOOP('',(#7005,#7082,#7086,#7090));+#7082=ORIENTED_EDGE('',*,*,#7083,.T.);+#7083=EDGE_CURVE('',#7007,#7084,#2359,.T.);+#7084=VERTEX_POINT('',#7085);+#7085=CARTESIAN_POINT('',(6.11,7.,0.75));+#7086=ORIENTED_EDGE('',*,*,#7087,.T.);+#7087=EDGE_CURVE('',#7084,#1521,#7088,.T.);+#7088=LINE('',#7089,#2043);+#7089=CARTESIAN_POINT('',(6.11,7.,0.630119079428));+#7090=ORIENTED_EDGE('',*,*,#1520,.F.);+#7091=ADVANCED_FACE('',(#7092),#7151,.F.);+#7092=FACE_BOUND('',#7093,.F.);+#7093=EDGE_LOOP('',(#7094,#7095,#7101,#7108,#7113,#7120,#7125,#7130,#7135,#7141,#7146,#7150));+#7094=ORIENTED_EDGE('',*,*,#7087,.F.);+#7095=ORIENTED_EDGE('',*,*,#7096,.T.);+#7096=EDGE_CURVE('',#7084,#7097,#7099,.T.);+#7097=VERTEX_POINT('',#7098);+#7098=CARTESIAN_POINT('',(6.11,7.2,0.75));+#7099=LINE('',#7100,#2377);+#7100=CARTESIAN_POINT('',(6.11,6.85,0.75));+#7101=ORIENTED_EDGE('',*,*,#7102,.T.);+#7102=EDGE_CURVE('',#7097,#7103,#7105,.T.);+#7103=VERTEX_POINT('',#7104);+#7104=CARTESIAN_POINT('',(6.11,7.298480775301,0.667364817767));+#7105=CIRCLE('',#7106,0.1);+#7106=AXIS2_PLACEMENT_3D('',#7107,#2386,#2387);+#7107=CARTESIAN_POINT('',(6.11,7.2,0.65));+#7108=ORIENTED_EDGE('',*,*,#7109,.T.);+#7109=EDGE_CURVE('',#7103,#7110,#7112,.T.);+#7110=VERTEX_POINT('',#7111);+#7111=CARTESIAN_POINT('',(6.11,7.382385590716,0.165270364467));+#7112=LINE('',#7104,#2393);+#7113=ORIENTED_EDGE('',*,*,#7114,.T.);+#7114=EDGE_CURVE('',#7110,#7115,#7117,.T.);+#7115=VERTEX_POINT('',#7116);+#7116=CARTESIAN_POINT('',(6.11,7.579347141319,1.387778780781E-16));+#7117=CIRCLE('',#7118,0.2);+#7118=AXIS2_PLACEMENT_3D('',#7119,#452,#2402);+#7119=CARTESIAN_POINT('',(6.11,7.579347141319,0.2));+#7120=ORIENTED_EDGE('',*,*,#7121,.T.);+#7121=EDGE_CURVE('',#7115,#7122,#7124,.T.);+#7122=VERTEX_POINT('',#7123);+#7123=CARTESIAN_POINT('',(6.11,8.,1.387778780781E-16));+#7124=LINE('',#7116,#2377);+#7125=ORIENTED_EDGE('',*,*,#7126,.T.);+#7126=EDGE_CURVE('',#7122,#7127,#7129,.T.);+#7127=VERTEX_POINT('',#7128);+#7128=CARTESIAN_POINT('',(6.11,8.,0.1));+#7129=LINE('',#7123,#2043);+#7130=ORIENTED_EDGE('',*,*,#7131,.T.);+#7131=EDGE_CURVE('',#7127,#7132,#7134,.T.);+#7132=VERTEX_POINT('',#7133);+#7133=CARTESIAN_POINT('',(6.11,7.579347141319,0.1));+#7134=LINE('',#7128,#407);+#7135=ORIENTED_EDGE('',*,*,#7136,.T.);+#7136=EDGE_CURVE('',#7132,#7137,#7139,.T.);+#7137=VERTEX_POINT('',#7138);+#7138=CARTESIAN_POINT('',(6.11,7.480866366018,0.182635182233));+#7139=CIRCLE('',#7140,1.E-01);+#7140=AXIS2_PLACEMENT_3D('',#7119,#2424,#2425);+#7141=ORIENTED_EDGE('',*,*,#7142,.T.);+#7142=EDGE_CURVE('',#7137,#7143,#7145,.T.);+#7143=VERTEX_POINT('',#7144);+#7144=CARTESIAN_POINT('',(6.11,7.396961550602,0.684729635533));+#7145=LINE('',#7138,#2431);+#7146=ORIENTED_EDGE('',*,*,#7147,.T.);+#7147=EDGE_CURVE('',#7143,#1533,#7148,.T.);+#7148=CIRCLE('',#7149,0.2);+#7149=AXIS2_PLACEMENT_3D('',#7107,#14,#2437);+#7150=ORIENTED_EDGE('',*,*,#1532,.T.);+#7151=PLANE('',#7152);+#7152=AXIS2_PLACEMENT_3D('',#7153,#452,#13);+#7153=CARTESIAN_POINT('',(6.11,7.414276639233,0.410238158856));+#7154=ADVANCED_FACE('',(#7155),#7218,.T.);+#7155=FACE_BOUND('',#7156,.T.);+#7156=EDGE_LOOP('',(#7157,#7163,#7169,#7176,#7181,#7188,#7193,#7198,#7203,#7209,#7214,#1539));+#7157=ORIENTED_EDGE('',*,*,#7158,.F.);+#7158=EDGE_CURVE('',#7159,#1541,#7161,.T.);+#7159=VERTEX_POINT('',#7160);+#7160=CARTESIAN_POINT('',(6.29,7.,0.75));+#7161=LINE('',#7162,#2043);+#7162=CARTESIAN_POINT('',(6.29,7.,0.630119079428));+#7163=ORIENTED_EDGE('',*,*,#7164,.T.);+#7164=EDGE_CURVE('',#7159,#7165,#7167,.T.);+#7165=VERTEX_POINT('',#7166);+#7166=CARTESIAN_POINT('',(6.29,7.2,0.75));+#7167=LINE('',#7168,#2377);+#7168=CARTESIAN_POINT('',(6.29,6.85,0.75));+#7169=ORIENTED_EDGE('',*,*,#7170,.T.);+#7170=EDGE_CURVE('',#7165,#7171,#7173,.T.);+#7171=VERTEX_POINT('',#7172);+#7172=CARTESIAN_POINT('',(6.29,7.298480775301,0.667364817767));+#7173=CIRCLE('',#7174,0.1);+#7174=AXIS2_PLACEMENT_3D('',#7175,#2386,#2387);+#7175=CARTESIAN_POINT('',(6.29,7.2,0.65));+#7176=ORIENTED_EDGE('',*,*,#7177,.T.);+#7177=EDGE_CURVE('',#7171,#7178,#7180,.T.);+#7178=VERTEX_POINT('',#7179);+#7179=CARTESIAN_POINT('',(6.29,7.382385590716,0.165270364467));+#7180=LINE('',#7172,#2393);+#7181=ORIENTED_EDGE('',*,*,#7182,.T.);+#7182=EDGE_CURVE('',#7178,#7183,#7185,.T.);+#7183=VERTEX_POINT('',#7184);+#7184=CARTESIAN_POINT('',(6.29,7.579347141319,1.387778780781E-16));+#7185=CIRCLE('',#7186,0.2);+#7186=AXIS2_PLACEMENT_3D('',#7187,#452,#2402);+#7187=CARTESIAN_POINT('',(6.29,7.579347141319,0.2));+#7188=ORIENTED_EDGE('',*,*,#7189,.T.);+#7189=EDGE_CURVE('',#7183,#7190,#7192,.T.);+#7190=VERTEX_POINT('',#7191);+#7191=CARTESIAN_POINT('',(6.29,8.,1.387778780781E-16));+#7192=LINE('',#7184,#2377);+#7193=ORIENTED_EDGE('',*,*,#7194,.T.);+#7194=EDGE_CURVE('',#7190,#7195,#7197,.T.);+#7195=VERTEX_POINT('',#7196);+#7196=CARTESIAN_POINT('',(6.29,8.,0.1));+#7197=LINE('',#7191,#2043);+#7198=ORIENTED_EDGE('',*,*,#7199,.T.);+#7199=EDGE_CURVE('',#7195,#7200,#7202,.T.);+#7200=VERTEX_POINT('',#7201);+#7201=CARTESIAN_POINT('',(6.29,7.579347141319,0.1));+#7202=LINE('',#7196,#407);+#7203=ORIENTED_EDGE('',*,*,#7204,.T.);+#7204=EDGE_CURVE('',#7200,#7205,#7207,.T.);+#7205=VERTEX_POINT('',#7206);+#7206=CARTESIAN_POINT('',(6.29,7.480866366018,0.182635182233));+#7207=CIRCLE('',#7208,1.E-01);+#7208=AXIS2_PLACEMENT_3D('',#7187,#2424,#2425);+#7209=ORIENTED_EDGE('',*,*,#7210,.T.);+#7210=EDGE_CURVE('',#7205,#7211,#7213,.T.);+#7211=VERTEX_POINT('',#7212);+#7212=CARTESIAN_POINT('',(6.29,7.396961550602,0.684729635533));+#7213=LINE('',#7206,#2431);+#7214=ORIENTED_EDGE('',*,*,#7215,.T.);+#7215=EDGE_CURVE('',#7211,#1536,#7216,.T.);+#7216=CIRCLE('',#7217,0.2);+#7217=AXIS2_PLACEMENT_3D('',#7175,#14,#2437);+#7218=PLANE('',#7219);+#7219=AXIS2_PLACEMENT_3D('',#7220,#452,#13);+#7220=CARTESIAN_POINT('',(6.29,7.414276639233,0.410238158856));+#7221=ADVANCED_FACE('',(#7222),#7229,.T.);+#7222=FACE_BOUND('',#7223,.F.);+#7223=EDGE_LOOP('',(#7224,#7214,#7227,#7228));+#7224=ORIENTED_EDGE('',*,*,#7225,.T.);+#7225=EDGE_CURVE('',#7143,#7211,#7226,.T.);+#7226=LINE('',#7144,#451);+#7227=ORIENTED_EDGE('',*,*,#1535,.F.);+#7228=ORIENTED_EDGE('',*,*,#7147,.F.);+#7229=CYLINDRICAL_SURFACE('',#7230,0.2);+#7230=AXIS2_PLACEMENT_3D('',#7107,#2386,#2437);+#7231=ADVANCED_FACE('',(#7232),#7251,.F.);+#7232=FACE_BOUND('',#7233,.F.);+#7233=EDGE_LOOP('',(#7234,#7237,#7242,#7247,#7249,#7250));+#7234=ORIENTED_EDGE('',*,*,#7235,.F.);+#7235=EDGE_CURVE('',#7236,#1565,#1574,.T.);+#7236=VERTEX_POINT('',#1575);+#7237=ORIENTED_EDGE('',*,*,#7238,.T.);+#7238=EDGE_CURVE('',#7236,#7239,#7241,.T.);+#7239=VERTEX_POINT('',#7240);+#7240=CARTESIAN_POINT('',(7.2,6.11,0.85));+#7241=LINE('',#1575,#1568);+#7242=ORIENTED_EDGE('',*,*,#7243,.T.);+#7243=EDGE_CURVE('',#7239,#7244,#7246,.T.);+#7244=VERTEX_POINT('',#7245);+#7245=CARTESIAN_POINT('',(7.,6.11,0.85));+#7246=LINE('',#7240,#1576);+#7247=ORIENTED_EDGE('',*,*,#7248,.T.);+#7248=EDGE_CURVE('',#7244,#1626,#7246,.T.);+#7249=ORIENTED_EDGE('',*,*,#1625,.F.);+#7250=ORIENTED_EDGE('',*,*,#1571,.F.);+#7251=PLANE('',#7252);+#7252=AXIS2_PLACEMENT_3D('',#1575,#464,#1577);+#7253=ADVANCED_FACE('',(#7254),#7271,.F.);+#7254=FACE_BOUND('',#7255,.F.);+#7255=EDGE_LOOP('',(#7256,#7261,#7266,#7270));+#7256=ORIENTED_EDGE('',*,*,#7257,.F.);+#7257=EDGE_CURVE('',#7258,#1560,#7260,.T.);+#7258=VERTEX_POINT('',#7259);+#7259=CARTESIAN_POINT('',(7.,6.825,0.75));+#7260=B_SPLINE_CURVE_WITH_KNOTS('',1,(#7259,#1561),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7261=ORIENTED_EDGE('',*,*,#7262,.T.);+#7262=EDGE_CURVE('',#7258,#7263,#7265,.T.);+#7263=VERTEX_POINT('',#7264);+#7264=CARTESIAN_POINT('',(7.,6.29,0.75));+#7265=LINE('',#7259,#1568);+#7266=ORIENTED_EDGE('',*,*,#7267,.T.);+#7267=EDGE_CURVE('',#7263,#1565,#7268,.T.);+#7268=LINE('',#7269,#2043);+#7269=CARTESIAN_POINT('',(7.,6.29,0.630119079428));+#7270=ORIENTED_EDGE('',*,*,#1564,.F.);+#7271=PLANE('',#7272);+#7272=AXIS2_PLACEMENT_3D('',#1561,#1577,#1569);+#7273=ADVANCED_FACE('',(#7274),#7286,.F.);+#7274=FACE_BOUND('',#7275,.F.);+#7275=EDGE_LOOP('',(#7276,#7281,#7282,#7283));+#7276=ORIENTED_EDGE('',*,*,#7277,.T.);+#7277=EDGE_CURVE('',#7278,#7258,#7280,.T.);+#7278=VERTEX_POINT('',#7279);+#7279=CARTESIAN_POINT('',(6.825,7.,0.75));+#7280=LINE('',#7279,#329);+#7281=ORIENTED_EDGE('',*,*,#7257,.T.);+#7282=ORIENTED_EDGE('',*,*,#1559,.F.);+#7283=ORIENTED_EDGE('',*,*,#7284,.F.);+#7284=EDGE_CURVE('',#7278,#1556,#7285,.T.);+#7285=B_SPLINE_CURVE_WITH_KNOTS('',1,(#7279,#1557),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7286=PLANE('',#7287);+#7287=AXIS2_PLACEMENT_3D('',#1557,#7288,#330);+#7288=DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#7289=ADVANCED_FACE('',(#7290),#2365,.F.);+#7290=FACE_BOUND('',#7291,.F.);+#7291=EDGE_LOOP('',(#7157,#7292,#7294,#7295));+#7292=ORIENTED_EDGE('',*,*,#7293,.T.);+#7293=EDGE_CURVE('',#7159,#7278,#2359,.T.);+#7294=ORIENTED_EDGE('',*,*,#7284,.T.);+#7295=ORIENTED_EDGE('',*,*,#1555,.F.);+#7296=ADVANCED_FACE('',(#7297),#7320,.F.);+#7297=FACE_BOUND('',#7298,.F.);+#7298=EDGE_LOOP('',(#7299,#7307,#7315,#7316));+#7299=ORIENTED_EDGE('',*,*,#7300,.T.);+#7300=EDGE_CURVE('',#7301,#7303,#7305,.T.);+#7301=VERTEX_POINT('',#7302);+#7302=CARTESIAN_POINT('',(6.7875,-6.925,0.85));+#7303=VERTEX_POINT('',#7304);+#7304=CARTESIAN_POINT('',(6.722564340983,-6.795128681966,1.460996513181));+#7305=B_SPLINE_CURVE_WITH_KNOTS('',1,(#7302,#7306),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7306=CARTESIAN_POINT('',(6.718419117457,-6.786838234914,1.5));+#7307=ORIENTED_EDGE('',*,*,#7308,.F.);+#7308=EDGE_CURVE('',#1610,#7303,#7309,.T.);+#7309=B_SPLINE_CURVE_WITH_KNOTS('',2,(#7310,#7311,#7312,#7313,#7314),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.28964361549,-3.998243263536E-02,0.136741676868,0.386402859722),.UNSPECIFIED.);+#7310=CARTESIAN_POINT('',(6.997865034984,-6.519827987965,1.460996513181));+#7311=CARTESIAN_POINT('',(6.909596477286,-6.608096545662,1.460996513181));+#7312=CARTESIAN_POINT('',(6.758846511474,-6.758846511474,1.460996513181));+#7313=CARTESIAN_POINT('',(6.608096545662,-6.909596477286,1.460996513181));+#7314=CARTESIAN_POINT('',(6.519827987965,-6.997865034984,1.460996513181));+#7315=ORIENTED_EDGE('',*,*,#1607,.F.);+#7316=ORIENTED_EDGE('',*,*,#7317,.T.);+#7317=EDGE_CURVE('',#1608,#7301,#7318,.T.);+#7318=LINE('',#1609,#7319);+#7319=VECTOR('',#7288,1.);+#7320=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#1609,#1613),(#7302,#7306)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7321=ADVANCED_FACE('',(#7322),#7343,.T.);+#7322=FACE_BOUND('',#7323,.T.);+#7323=EDGE_LOOP('',(#7324,#7325,#7326,#1614));+#7324=ORIENTED_EDGE('',*,*,#1894,.T.);+#7325=ORIENTED_EDGE('',*,*,#1994,.T.);+#7326=ORIENTED_EDGE('',*,*,#7327,.F.);+#7327=EDGE_CURVE('',#1610,#1985,#7328,.T.);+#7328=B_SPLINE_CURVE_WITH_KNOTS('',7,(#7329,#7330,#7331,#7332,#7333,#7334,#7335,#7336,#7337,#7338,#7339,#7340,#7341,#7342),.UNSPECIFIED.,.F.,.F.,(8,6,8),(0.,0.29066362524,1.),.UNSPECIFIED.);+#7329=CARTESIAN_POINT('',(6.795124813083,-6.722568209866,1.460996513181));+#7330=CARTESIAN_POINT('',(6.794553244516,-6.722331458413,1.463531744317));+#7331=CARTESIAN_POINT('',(6.793815945073,-6.722026058984,1.46608564657));+#7332=CARTESIAN_POINT('',(6.792904444573,-6.721648503115,1.468641015865));+#7333=CARTESIAN_POINT('',(6.791813200741,-6.72119649512,1.471177624923));+#7334=CARTESIAN_POINT('',(6.790540311211,-6.720669247014,1.473673405584));+#7335=CARTESIAN_POINT('',(6.789088225532,-6.720067773432,1.476105631134));+#7336=CARTESIAN_POINT('',(6.783501808038,-6.71775380354,1.484178424866));+#7337=CARTESIAN_POINT('',(6.778516388407,-6.715688775078,1.489393835253));+#7338=CARTESIAN_POINT('',(6.772614942935,-6.713244316498,1.493781041797));+#7339=CARTESIAN_POINT('',(6.76606517067,-6.710531311634,1.497036468734));+#7340=CARTESIAN_POINT('',(6.759308791872,-6.707732728348,1.499068462587));+#7341=CARTESIAN_POINT('',(6.752663910709,-6.704980328107,1.500000203951));+#7342=CARTESIAN_POINT('',(6.746349033255,-6.702364620385,1.5));+#7343=( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,2,((#1617,#1618,#1619,#1620,#1621),(#7344,#7345,#7346,#7347,#7348),(#1996,#1997,#1998,#1999,#2000)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,1,1,3),(0.,13.517816638234),(-0.698356801641,-4.048920165974E-02,13.477327436574,14.135195036556),.UNSPECIFIED.) GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE(((1.,1.,1.,1.,1.),(0.777145961457,0.777145961457,0.777145961457,0.777145961457,0.777145961457),(1.,1.,1.,1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#7344=CARTESIAN_POINT('',(6.786838234914,7.416775919098,1.5));+#7345=CARTESIAN_POINT('',(6.786838234914,7.087842119108,1.5));+#7346=CARTESIAN_POINT('',(6.786838234914,1.324926446165E-15,1.5));+#7347=CARTESIAN_POINT('',(6.786838234914,-7.087842119108,1.5));+#7348=CARTESIAN_POINT('',(6.786838234914,-7.416775919098,1.5));+#7349=ADVANCED_FACE('',(#7350),#435,.F.);+#7350=FACE_BOUND('',#7351,.F.);+#7351=EDGE_LOOP('',(#7352,#7353,#7357,#7361));+#7352=ORIENTED_EDGE('',*,*,#7248,.F.);+#7353=ORIENTED_EDGE('',*,*,#7354,.T.);+#7354=EDGE_CURVE('',#7244,#7355,#1567,.T.);+#7355=VERTEX_POINT('',#7356);+#7356=CARTESIAN_POINT('',(7.,5.89,0.85));+#7357=ORIENTED_EDGE('',*,*,#7358,.T.);+#7358=EDGE_CURVE('',#7355,#1630,#7359,.T.);+#7359=LINE('',#7360,#1576);+#7360=CARTESIAN_POINT('',(7.2,5.89,0.85));+#7361=ORIENTED_EDGE('',*,*,#1629,.F.);+#7362=ADVANCED_FACE('',(#7363),#7382,.F.);+#7363=FACE_BOUND('',#7364,.F.);+#7364=EDGE_LOOP('',(#7365,#7368,#7373,#7378,#7380,#7381));+#7365=ORIENTED_EDGE('',*,*,#7366,.F.);+#7366=EDGE_CURVE('',#7367,#7355,#7359,.T.);+#7367=VERTEX_POINT('',#7360);+#7368=ORIENTED_EDGE('',*,*,#7369,.T.);+#7369=EDGE_CURVE('',#7367,#7370,#7372,.T.);+#7370=VERTEX_POINT('',#7371);+#7371=CARTESIAN_POINT('',(7.2,5.71,0.85));+#7372=LINE('',#7360,#1568);+#7373=ORIENTED_EDGE('',*,*,#7374,.T.);+#7374=EDGE_CURVE('',#7370,#7375,#7377,.T.);+#7375=VERTEX_POINT('',#7376);+#7376=CARTESIAN_POINT('',(7.,5.71,0.85));+#7377=LINE('',#7371,#1576);+#7378=ORIENTED_EDGE('',*,*,#7379,.T.);+#7379=EDGE_CURVE('',#7375,#1634,#7377,.T.);+#7380=ORIENTED_EDGE('',*,*,#1633,.F.);+#7381=ORIENTED_EDGE('',*,*,#7358,.F.);+#7382=PLANE('',#7383);+#7383=AXIS2_PLACEMENT_3D('',#7360,#464,#1577);+#7384=ADVANCED_FACE('',(#7385),#435,.F.);+#7385=FACE_BOUND('',#7386,.F.);+#7386=EDGE_LOOP('',(#7387,#7388,#7392,#7396));+#7387=ORIENTED_EDGE('',*,*,#7379,.F.);+#7388=ORIENTED_EDGE('',*,*,#7389,.T.);+#7389=EDGE_CURVE('',#7375,#7390,#1567,.T.);+#7390=VERTEX_POINT('',#7391);+#7391=CARTESIAN_POINT('',(7.,5.49,0.85));+#7392=ORIENTED_EDGE('',*,*,#7393,.T.);+#7393=EDGE_CURVE('',#7390,#1638,#7394,.T.);+#7394=LINE('',#7395,#1576);+#7395=CARTESIAN_POINT('',(7.2,5.49,0.85));+#7396=ORIENTED_EDGE('',*,*,#1637,.F.);+#7397=ADVANCED_FACE('',(#7398),#7417,.F.);+#7398=FACE_BOUND('',#7399,.F.);+#7399=EDGE_LOOP('',(#7400,#7403,#7408,#7413,#7415,#7416));+#7400=ORIENTED_EDGE('',*,*,#7401,.F.);+#7401=EDGE_CURVE('',#7402,#7390,#7394,.T.);+#7402=VERTEX_POINT('',#7395);+#7403=ORIENTED_EDGE('',*,*,#7404,.T.);+#7404=EDGE_CURVE('',#7402,#7405,#7407,.T.);+#7405=VERTEX_POINT('',#7406);+#7406=CARTESIAN_POINT('',(7.2,5.31,0.85));+#7407=LINE('',#7395,#1568);+#7408=ORIENTED_EDGE('',*,*,#7409,.T.);+#7409=EDGE_CURVE('',#7405,#7410,#7412,.T.);+#7410=VERTEX_POINT('',#7411);+#7411=CARTESIAN_POINT('',(7.,5.31,0.85));+#7412=LINE('',#7406,#1576);+#7413=ORIENTED_EDGE('',*,*,#7414,.T.);+#7414=EDGE_CURVE('',#7410,#1642,#7412,.T.);+#7415=ORIENTED_EDGE('',*,*,#1641,.F.);+#7416=ORIENTED_EDGE('',*,*,#7393,.F.);+#7417=PLANE('',#7418);+#7418=AXIS2_PLACEMENT_3D('',#7395,#464,#1577);+#7419=ADVANCED_FACE('',(#7420),#435,.F.);+#7420=FACE_BOUND('',#7421,.F.);+#7421=EDGE_LOOP('',(#7422,#7423,#7427,#7431));+#7422=ORIENTED_EDGE('',*,*,#7414,.F.);+#7423=ORIENTED_EDGE('',*,*,#7424,.T.);+#7424=EDGE_CURVE('',#7410,#7425,#1567,.T.);+#7425=VERTEX_POINT('',#7426);+#7426=CARTESIAN_POINT('',(7.,5.09,0.85));+#7427=ORIENTED_EDGE('',*,*,#7428,.T.);+#7428=EDGE_CURVE('',#7425,#1646,#7429,.T.);+#7429=LINE('',#7430,#1576);+#7430=CARTESIAN_POINT('',(7.2,5.09,0.85));+#7431=ORIENTED_EDGE('',*,*,#1645,.F.);+#7432=ADVANCED_FACE('',(#7433),#7452,.F.);+#7433=FACE_BOUND('',#7434,.F.);+#7434=EDGE_LOOP('',(#7435,#7438,#7443,#7448,#7450,#7451));+#7435=ORIENTED_EDGE('',*,*,#7436,.F.);+#7436=EDGE_CURVE('',#7437,#7425,#7429,.T.);+#7437=VERTEX_POINT('',#7430);+#7438=ORIENTED_EDGE('',*,*,#7439,.T.);+#7439=EDGE_CURVE('',#7437,#7440,#7442,.T.);+#7440=VERTEX_POINT('',#7441);+#7441=CARTESIAN_POINT('',(7.2,4.91,0.85));+#7442=LINE('',#7430,#1568);+#7443=ORIENTED_EDGE('',*,*,#7444,.T.);+#7444=EDGE_CURVE('',#7440,#7445,#7447,.T.);+#7445=VERTEX_POINT('',#7446);+#7446=CARTESIAN_POINT('',(7.,4.91,0.85));+#7447=LINE('',#7441,#1576);+#7448=ORIENTED_EDGE('',*,*,#7449,.T.);+#7449=EDGE_CURVE('',#7445,#1650,#7447,.T.);+#7450=ORIENTED_EDGE('',*,*,#1649,.F.);+#7451=ORIENTED_EDGE('',*,*,#7428,.F.);+#7452=PLANE('',#7453);+#7453=AXIS2_PLACEMENT_3D('',#7430,#464,#1577);+#7454=ADVANCED_FACE('',(#7455),#435,.F.);+#7455=FACE_BOUND('',#7456,.F.);+#7456=EDGE_LOOP('',(#7457,#7458,#7462,#7466));+#7457=ORIENTED_EDGE('',*,*,#7449,.F.);+#7458=ORIENTED_EDGE('',*,*,#7459,.T.);+#7459=EDGE_CURVE('',#7445,#7460,#1567,.T.);+#7460=VERTEX_POINT('',#7461);+#7461=CARTESIAN_POINT('',(7.,4.69,0.85));+#7462=ORIENTED_EDGE('',*,*,#7463,.T.);+#7463=EDGE_CURVE('',#7460,#1654,#7464,.T.);+#7464=LINE('',#7465,#1576);+#7465=CARTESIAN_POINT('',(7.2,4.69,0.85));+#7466=ORIENTED_EDGE('',*,*,#1653,.F.);+#7467=ADVANCED_FACE('',(#7468),#7487,.F.);+#7468=FACE_BOUND('',#7469,.F.);+#7469=EDGE_LOOP('',(#7470,#7473,#7478,#7483,#7485,#7486));+#7470=ORIENTED_EDGE('',*,*,#7471,.F.);+#7471=EDGE_CURVE('',#7472,#7460,#7464,.T.);+#7472=VERTEX_POINT('',#7465);+#7473=ORIENTED_EDGE('',*,*,#7474,.T.);+#7474=EDGE_CURVE('',#7472,#7475,#7477,.T.);+#7475=VERTEX_POINT('',#7476);+#7476=CARTESIAN_POINT('',(7.2,4.51,0.85));+#7477=LINE('',#7465,#1568);+#7478=ORIENTED_EDGE('',*,*,#7479,.T.);+#7479=EDGE_CURVE('',#7475,#7480,#7482,.T.);+#7480=VERTEX_POINT('',#7481);+#7481=CARTESIAN_POINT('',(7.,4.51,0.85));+#7482=LINE('',#7476,#1576);+#7483=ORIENTED_EDGE('',*,*,#7484,.T.);+#7484=EDGE_CURVE('',#7480,#1658,#7482,.T.);+#7485=ORIENTED_EDGE('',*,*,#1657,.F.);+#7486=ORIENTED_EDGE('',*,*,#7463,.F.);+#7487=PLANE('',#7488);+#7488=AXIS2_PLACEMENT_3D('',#7465,#464,#1577);+#7489=ADVANCED_FACE('',(#7490),#435,.F.);+#7490=FACE_BOUND('',#7491,.F.);+#7491=EDGE_LOOP('',(#7492,#7493,#7497,#7501));+#7492=ORIENTED_EDGE('',*,*,#7484,.F.);+#7493=ORIENTED_EDGE('',*,*,#7494,.T.);+#7494=EDGE_CURVE('',#7480,#7495,#1567,.T.);+#7495=VERTEX_POINT('',#7496);+#7496=CARTESIAN_POINT('',(7.,4.29,0.85));+#7497=ORIENTED_EDGE('',*,*,#7498,.T.);+#7498=EDGE_CURVE('',#7495,#1662,#7499,.T.);+#7499=LINE('',#7500,#1576);+#7500=CARTESIAN_POINT('',(7.2,4.29,0.85));+#7501=ORIENTED_EDGE('',*,*,#1661,.F.);+#7502=ADVANCED_FACE('',(#7503),#7522,.F.);+#7503=FACE_BOUND('',#7504,.F.);+#7504=EDGE_LOOP('',(#7505,#7508,#7513,#7518,#7520,#7521));+#7505=ORIENTED_EDGE('',*,*,#7506,.F.);+#7506=EDGE_CURVE('',#7507,#7495,#7499,.T.);+#7507=VERTEX_POINT('',#7500);+#7508=ORIENTED_EDGE('',*,*,#7509,.T.);+#7509=EDGE_CURVE('',#7507,#7510,#7512,.T.);+#7510=VERTEX_POINT('',#7511);+#7511=CARTESIAN_POINT('',(7.2,4.11,0.85));+#7512=LINE('',#7500,#1568);+#7513=ORIENTED_EDGE('',*,*,#7514,.T.);+#7514=EDGE_CURVE('',#7510,#7515,#7517,.T.);+#7515=VERTEX_POINT('',#7516);+#7516=CARTESIAN_POINT('',(7.,4.11,0.85));+#7517=LINE('',#7511,#1576);+#7518=ORIENTED_EDGE('',*,*,#7519,.T.);+#7519=EDGE_CURVE('',#7515,#1666,#7517,.T.);+#7520=ORIENTED_EDGE('',*,*,#1665,.F.);+#7521=ORIENTED_EDGE('',*,*,#7498,.F.);+#7522=PLANE('',#7523);+#7523=AXIS2_PLACEMENT_3D('',#7500,#464,#1577);+#7524=ADVANCED_FACE('',(#7525),#435,.F.);+#7525=FACE_BOUND('',#7526,.F.);+#7526=EDGE_LOOP('',(#7527,#7528,#7532,#7536));+#7527=ORIENTED_EDGE('',*,*,#7519,.F.);+#7528=ORIENTED_EDGE('',*,*,#7529,.T.);+#7529=EDGE_CURVE('',#7515,#7530,#1567,.T.);+#7530=VERTEX_POINT('',#7531);+#7531=CARTESIAN_POINT('',(7.,3.89,0.85));+#7532=ORIENTED_EDGE('',*,*,#7533,.T.);+#7533=EDGE_CURVE('',#7530,#1670,#7534,.T.);+#7534=LINE('',#7535,#1576);+#7535=CARTESIAN_POINT('',(7.2,3.89,0.85));+#7536=ORIENTED_EDGE('',*,*,#1669,.F.);+#7537=ADVANCED_FACE('',(#7538),#7557,.F.);+#7538=FACE_BOUND('',#7539,.F.);+#7539=EDGE_LOOP('',(#7540,#7543,#7548,#7553,#7555,#7556));+#7540=ORIENTED_EDGE('',*,*,#7541,.F.);+#7541=EDGE_CURVE('',#7542,#7530,#7534,.T.);+#7542=VERTEX_POINT('',#7535);+#7543=ORIENTED_EDGE('',*,*,#7544,.T.);+#7544=EDGE_CURVE('',#7542,#7545,#7547,.T.);+#7545=VERTEX_POINT('',#7546);+#7546=CARTESIAN_POINT('',(7.2,3.71,0.85));+#7547=LINE('',#7535,#1568);+#7548=ORIENTED_EDGE('',*,*,#7549,.T.);+#7549=EDGE_CURVE('',#7545,#7550,#7552,.T.);+#7550=VERTEX_POINT('',#7551);+#7551=CARTESIAN_POINT('',(7.,3.71,0.85));+#7552=LINE('',#7546,#1576);+#7553=ORIENTED_EDGE('',*,*,#7554,.T.);+#7554=EDGE_CURVE('',#7550,#1674,#7552,.T.);+#7555=ORIENTED_EDGE('',*,*,#1673,.F.);+#7556=ORIENTED_EDGE('',*,*,#7533,.F.);+#7557=PLANE('',#7558);+#7558=AXIS2_PLACEMENT_3D('',#7535,#464,#1577);+#7559=ADVANCED_FACE('',(#7560),#435,.F.);+#7560=FACE_BOUND('',#7561,.F.);+#7561=EDGE_LOOP('',(#7562,#7563,#7567,#7571));+#7562=ORIENTED_EDGE('',*,*,#7554,.F.);+#7563=ORIENTED_EDGE('',*,*,#7564,.T.);+#7564=EDGE_CURVE('',#7550,#7565,#1567,.T.);+#7565=VERTEX_POINT('',#7566);+#7566=CARTESIAN_POINT('',(7.,3.49,0.85));+#7567=ORIENTED_EDGE('',*,*,#7568,.T.);+#7568=EDGE_CURVE('',#7565,#1678,#7569,.T.);+#7569=LINE('',#7570,#1576);+#7570=CARTESIAN_POINT('',(7.2,3.49,0.85));+#7571=ORIENTED_EDGE('',*,*,#1677,.F.);+#7572=ADVANCED_FACE('',(#7573),#7592,.F.);+#7573=FACE_BOUND('',#7574,.F.);+#7574=EDGE_LOOP('',(#7575,#7578,#7583,#7588,#7590,#7591));+#7575=ORIENTED_EDGE('',*,*,#7576,.F.);+#7576=EDGE_CURVE('',#7577,#7565,#7569,.T.);+#7577=VERTEX_POINT('',#7570);+#7578=ORIENTED_EDGE('',*,*,#7579,.T.);+#7579=EDGE_CURVE('',#7577,#7580,#7582,.T.);+#7580=VERTEX_POINT('',#7581);+#7581=CARTESIAN_POINT('',(7.2,3.31,0.85));+#7582=LINE('',#7570,#1568);+#7583=ORIENTED_EDGE('',*,*,#7584,.T.);+#7584=EDGE_CURVE('',#7580,#7585,#7587,.T.);+#7585=VERTEX_POINT('',#7586);+#7586=CARTESIAN_POINT('',(7.,3.31,0.85));+#7587=LINE('',#7581,#1576);+#7588=ORIENTED_EDGE('',*,*,#7589,.T.);+#7589=EDGE_CURVE('',#7585,#1682,#7587,.T.);+#7590=ORIENTED_EDGE('',*,*,#1681,.F.);+#7591=ORIENTED_EDGE('',*,*,#7568,.F.);+#7592=PLANE('',#7593);+#7593=AXIS2_PLACEMENT_3D('',#7570,#464,#1577);+#7594=ADVANCED_FACE('',(#7595),#435,.F.);+#7595=FACE_BOUND('',#7596,.F.);+#7596=EDGE_LOOP('',(#7597,#7598,#7602,#7606));+#7597=ORIENTED_EDGE('',*,*,#7589,.F.);+#7598=ORIENTED_EDGE('',*,*,#7599,.T.);+#7599=EDGE_CURVE('',#7585,#7600,#1567,.T.);+#7600=VERTEX_POINT('',#7601);+#7601=CARTESIAN_POINT('',(7.,3.09,0.85));+#7602=ORIENTED_EDGE('',*,*,#7603,.T.);+#7603=EDGE_CURVE('',#7600,#1686,#7604,.T.);+#7604=LINE('',#7605,#1576);+#7605=CARTESIAN_POINT('',(7.2,3.09,0.85));+#7606=ORIENTED_EDGE('',*,*,#1685,.F.);+#7607=ADVANCED_FACE('',(#7608),#7627,.F.);+#7608=FACE_BOUND('',#7609,.F.);+#7609=EDGE_LOOP('',(#7610,#7613,#7618,#7623,#7625,#7626));+#7610=ORIENTED_EDGE('',*,*,#7611,.F.);+#7611=EDGE_CURVE('',#7612,#7600,#7604,.T.);+#7612=VERTEX_POINT('',#7605);+#7613=ORIENTED_EDGE('',*,*,#7614,.T.);+#7614=EDGE_CURVE('',#7612,#7615,#7617,.T.);+#7615=VERTEX_POINT('',#7616);+#7616=CARTESIAN_POINT('',(7.2,2.91,0.85));+#7617=LINE('',#7605,#1568);+#7618=ORIENTED_EDGE('',*,*,#7619,.T.);+#7619=EDGE_CURVE('',#7615,#7620,#7622,.T.);+#7620=VERTEX_POINT('',#7621);+#7621=CARTESIAN_POINT('',(7.,2.91,0.85));+#7622=LINE('',#7616,#1576);+#7623=ORIENTED_EDGE('',*,*,#7624,.T.);+#7624=EDGE_CURVE('',#7620,#1690,#7622,.T.);+#7625=ORIENTED_EDGE('',*,*,#1689,.F.);+#7626=ORIENTED_EDGE('',*,*,#7603,.F.);+#7627=PLANE('',#7628);+#7628=AXIS2_PLACEMENT_3D('',#7605,#464,#1577);+#7629=ADVANCED_FACE('',(#7630),#435,.F.);+#7630=FACE_BOUND('',#7631,.F.);+#7631=EDGE_LOOP('',(#7632,#7633,#7637,#7641));+#7632=ORIENTED_EDGE('',*,*,#7624,.F.);+#7633=ORIENTED_EDGE('',*,*,#7634,.T.);+#7634=EDGE_CURVE('',#7620,#7635,#1567,.T.);+#7635=VERTEX_POINT('',#7636);+#7636=CARTESIAN_POINT('',(7.,2.69,0.85));+#7637=ORIENTED_EDGE('',*,*,#7638,.T.);+#7638=EDGE_CURVE('',#7635,#1694,#7639,.T.);+#7639=LINE('',#7640,#1576);+#7640=CARTESIAN_POINT('',(7.2,2.69,0.85));+#7641=ORIENTED_EDGE('',*,*,#1693,.F.);+#7642=ADVANCED_FACE('',(#7643),#7662,.F.);+#7643=FACE_BOUND('',#7644,.F.);+#7644=EDGE_LOOP('',(#7645,#7648,#7653,#7658,#7660,#7661));+#7645=ORIENTED_EDGE('',*,*,#7646,.F.);+#7646=EDGE_CURVE('',#7647,#7635,#7639,.T.);+#7647=VERTEX_POINT('',#7640);+#7648=ORIENTED_EDGE('',*,*,#7649,.T.);+#7649=EDGE_CURVE('',#7647,#7650,#7652,.T.);+#7650=VERTEX_POINT('',#7651);+#7651=CARTESIAN_POINT('',(7.2,2.51,0.85));+#7652=LINE('',#7640,#1568);+#7653=ORIENTED_EDGE('',*,*,#7654,.T.);+#7654=EDGE_CURVE('',#7650,#7655,#7657,.T.);+#7655=VERTEX_POINT('',#7656);+#7656=CARTESIAN_POINT('',(7.,2.51,0.85));+#7657=LINE('',#7651,#1576);+#7658=ORIENTED_EDGE('',*,*,#7659,.T.);+#7659=EDGE_CURVE('',#7655,#1698,#7657,.T.);+#7660=ORIENTED_EDGE('',*,*,#1697,.F.);+#7661=ORIENTED_EDGE('',*,*,#7638,.F.);+#7662=PLANE('',#7663);+#7663=AXIS2_PLACEMENT_3D('',#7640,#464,#1577);+#7664=ADVANCED_FACE('',(#7665),#435,.F.);+#7665=FACE_BOUND('',#7666,.F.);+#7666=EDGE_LOOP('',(#7667,#7668,#7672,#7676));+#7667=ORIENTED_EDGE('',*,*,#7659,.F.);+#7668=ORIENTED_EDGE('',*,*,#7669,.T.);+#7669=EDGE_CURVE('',#7655,#7670,#1567,.T.);+#7670=VERTEX_POINT('',#7671);+#7671=CARTESIAN_POINT('',(7.,2.29,0.85));+#7672=ORIENTED_EDGE('',*,*,#7673,.T.);+#7673=EDGE_CURVE('',#7670,#1702,#7674,.T.);+#7674=LINE('',#7675,#1576);+#7675=CARTESIAN_POINT('',(7.2,2.29,0.85));+#7676=ORIENTED_EDGE('',*,*,#1701,.F.);+#7677=ADVANCED_FACE('',(#7678),#7697,.F.);+#7678=FACE_BOUND('',#7679,.F.);+#7679=EDGE_LOOP('',(#7680,#7683,#7688,#7693,#7695,#7696));+#7680=ORIENTED_EDGE('',*,*,#7681,.F.);+#7681=EDGE_CURVE('',#7682,#7670,#7674,.T.);+#7682=VERTEX_POINT('',#7675);+#7683=ORIENTED_EDGE('',*,*,#7684,.T.);+#7684=EDGE_CURVE('',#7682,#7685,#7687,.T.);+#7685=VERTEX_POINT('',#7686);+#7686=CARTESIAN_POINT('',(7.2,2.11,0.85));+#7687=LINE('',#7675,#1568);+#7688=ORIENTED_EDGE('',*,*,#7689,.T.);+#7689=EDGE_CURVE('',#7685,#7690,#7692,.T.);+#7690=VERTEX_POINT('',#7691);+#7691=CARTESIAN_POINT('',(7.,2.11,0.85));+#7692=LINE('',#7686,#1576);+#7693=ORIENTED_EDGE('',*,*,#7694,.T.);+#7694=EDGE_CURVE('',#7690,#1706,#7692,.T.);+#7695=ORIENTED_EDGE('',*,*,#1705,.F.);+#7696=ORIENTED_EDGE('',*,*,#7673,.F.);+#7697=PLANE('',#7698);+#7698=AXIS2_PLACEMENT_3D('',#7675,#464,#1577);+#7699=ADVANCED_FACE('',(#7700),#435,.F.);+#7700=FACE_BOUND('',#7701,.F.);+#7701=EDGE_LOOP('',(#7702,#7703,#7707,#7711));+#7702=ORIENTED_EDGE('',*,*,#7694,.F.);+#7703=ORIENTED_EDGE('',*,*,#7704,.T.);+#7704=EDGE_CURVE('',#7690,#7705,#1567,.T.);+#7705=VERTEX_POINT('',#7706);+#7706=CARTESIAN_POINT('',(7.,1.89,0.85));+#7707=ORIENTED_EDGE('',*,*,#7708,.T.);+#7708=EDGE_CURVE('',#7705,#1710,#7709,.T.);+#7709=LINE('',#7710,#1576);+#7710=CARTESIAN_POINT('',(7.2,1.89,0.85));+#7711=ORIENTED_EDGE('',*,*,#1709,.F.);+#7712=ADVANCED_FACE('',(#7713),#7732,.F.);+#7713=FACE_BOUND('',#7714,.F.);+#7714=EDGE_LOOP('',(#7715,#7718,#7723,#7728,#7730,#7731));+#7715=ORIENTED_EDGE('',*,*,#7716,.F.);+#7716=EDGE_CURVE('',#7717,#7705,#7709,.T.);+#7717=VERTEX_POINT('',#7710);+#7718=ORIENTED_EDGE('',*,*,#7719,.T.);+#7719=EDGE_CURVE('',#7717,#7720,#7722,.T.);+#7720=VERTEX_POINT('',#7721);+#7721=CARTESIAN_POINT('',(7.2,1.71,0.85));+#7722=LINE('',#7710,#1568);+#7723=ORIENTED_EDGE('',*,*,#7724,.T.);+#7724=EDGE_CURVE('',#7720,#7725,#7727,.T.);+#7725=VERTEX_POINT('',#7726);+#7726=CARTESIAN_POINT('',(7.,1.71,0.85));+#7727=LINE('',#7721,#1576);+#7728=ORIENTED_EDGE('',*,*,#7729,.T.);+#7729=EDGE_CURVE('',#7725,#1714,#7727,.T.);+#7730=ORIENTED_EDGE('',*,*,#1713,.F.);+#7731=ORIENTED_EDGE('',*,*,#7708,.F.);+#7732=PLANE('',#7733);+#7733=AXIS2_PLACEMENT_3D('',#7710,#464,#1577);+#7734=ADVANCED_FACE('',(#7735),#435,.F.);+#7735=FACE_BOUND('',#7736,.F.);+#7736=EDGE_LOOP('',(#7737,#7738,#7742,#7746));+#7737=ORIENTED_EDGE('',*,*,#7729,.F.);+#7738=ORIENTED_EDGE('',*,*,#7739,.T.);+#7739=EDGE_CURVE('',#7725,#7740,#1567,.T.);+#7740=VERTEX_POINT('',#7741);+#7741=CARTESIAN_POINT('',(7.,1.49,0.85));+#7742=ORIENTED_EDGE('',*,*,#7743,.T.);+#7743=EDGE_CURVE('',#7740,#1718,#7744,.T.);+#7744=LINE('',#7745,#1576);+#7745=CARTESIAN_POINT('',(7.2,1.49,0.85));+#7746=ORIENTED_EDGE('',*,*,#1717,.F.);+#7747=ADVANCED_FACE('',(#7748),#7767,.F.);+#7748=FACE_BOUND('',#7749,.F.);+#7749=EDGE_LOOP('',(#7750,#7753,#7758,#7763,#7765,#7766));+#7750=ORIENTED_EDGE('',*,*,#7751,.F.);+#7751=EDGE_CURVE('',#7752,#7740,#7744,.T.);+#7752=VERTEX_POINT('',#7745);+#7753=ORIENTED_EDGE('',*,*,#7754,.T.);+#7754=EDGE_CURVE('',#7752,#7755,#7757,.T.);+#7755=VERTEX_POINT('',#7756);+#7756=CARTESIAN_POINT('',(7.2,1.31,0.85));+#7757=LINE('',#7745,#1568);+#7758=ORIENTED_EDGE('',*,*,#7759,.T.);+#7759=EDGE_CURVE('',#7755,#7760,#7762,.T.);+#7760=VERTEX_POINT('',#7761);+#7761=CARTESIAN_POINT('',(7.,1.31,0.85));+#7762=LINE('',#7756,#1576);+#7763=ORIENTED_EDGE('',*,*,#7764,.T.);+#7764=EDGE_CURVE('',#7760,#1722,#7762,.T.);+#7765=ORIENTED_EDGE('',*,*,#1721,.F.);+#7766=ORIENTED_EDGE('',*,*,#7743,.F.);+#7767=PLANE('',#7768);+#7768=AXIS2_PLACEMENT_3D('',#7745,#464,#1577);+#7769=ADVANCED_FACE('',(#7770),#435,.F.);+#7770=FACE_BOUND('',#7771,.F.);+#7771=EDGE_LOOP('',(#7772,#7773,#7777,#7781));+#7772=ORIENTED_EDGE('',*,*,#7764,.F.);+#7773=ORIENTED_EDGE('',*,*,#7774,.T.);+#7774=EDGE_CURVE('',#7760,#7775,#1567,.T.);+#7775=VERTEX_POINT('',#7776);+#7776=CARTESIAN_POINT('',(7.,1.09,0.85));+#7777=ORIENTED_EDGE('',*,*,#7778,.T.);+#7778=EDGE_CURVE('',#7775,#1726,#7779,.T.);+#7779=LINE('',#7780,#1576);+#7780=CARTESIAN_POINT('',(7.2,1.09,0.85));+#7781=ORIENTED_EDGE('',*,*,#1725,.F.);+#7782=ADVANCED_FACE('',(#7783),#7802,.F.);+#7783=FACE_BOUND('',#7784,.F.);+#7784=EDGE_LOOP('',(#7785,#7788,#7793,#7798,#7800,#7801));+#7785=ORIENTED_EDGE('',*,*,#7786,.F.);+#7786=EDGE_CURVE('',#7787,#7775,#7779,.T.);+#7787=VERTEX_POINT('',#7780);+#7788=ORIENTED_EDGE('',*,*,#7789,.T.);+#7789=EDGE_CURVE('',#7787,#7790,#7792,.T.);+#7790=VERTEX_POINT('',#7791);+#7791=CARTESIAN_POINT('',(7.2,0.91,0.85));+#7792=LINE('',#7780,#1568);+#7793=ORIENTED_EDGE('',*,*,#7794,.T.);+#7794=EDGE_CURVE('',#7790,#7795,#7797,.T.);+#7795=VERTEX_POINT('',#7796);+#7796=CARTESIAN_POINT('',(7.,0.91,0.85));+#7797=LINE('',#7791,#1576);+#7798=ORIENTED_EDGE('',*,*,#7799,.T.);+#7799=EDGE_CURVE('',#7795,#1730,#7797,.T.);+#7800=ORIENTED_EDGE('',*,*,#1729,.F.);+#7801=ORIENTED_EDGE('',*,*,#7778,.F.);+#7802=PLANE('',#7803);+#7803=AXIS2_PLACEMENT_3D('',#7780,#464,#1577);+#7804=ADVANCED_FACE('',(#7805),#435,.F.);+#7805=FACE_BOUND('',#7806,.F.);+#7806=EDGE_LOOP('',(#7807,#7808,#7812,#7816));+#7807=ORIENTED_EDGE('',*,*,#7799,.F.);+#7808=ORIENTED_EDGE('',*,*,#7809,.T.);+#7809=EDGE_CURVE('',#7795,#7810,#1567,.T.);+#7810=VERTEX_POINT('',#7811);+#7811=CARTESIAN_POINT('',(7.,0.69,0.85));+#7812=ORIENTED_EDGE('',*,*,#7813,.T.);+#7813=EDGE_CURVE('',#7810,#1734,#7814,.T.);+#7814=LINE('',#7815,#1576);+#7815=CARTESIAN_POINT('',(7.2,0.69,0.85));+#7816=ORIENTED_EDGE('',*,*,#1733,.F.);+#7817=ADVANCED_FACE('',(#7818),#7837,.F.);+#7818=FACE_BOUND('',#7819,.F.);+#7819=EDGE_LOOP('',(#7820,#7823,#7828,#7833,#7835,#7836));+#7820=ORIENTED_EDGE('',*,*,#7821,.F.);+#7821=EDGE_CURVE('',#7822,#7810,#7814,.T.);+#7822=VERTEX_POINT('',#7815);+#7823=ORIENTED_EDGE('',*,*,#7824,.T.);+#7824=EDGE_CURVE('',#7822,#7825,#7827,.T.);+#7825=VERTEX_POINT('',#7826);+#7826=CARTESIAN_POINT('',(7.2,0.51,0.85));+#7827=LINE('',#7815,#1568);+#7828=ORIENTED_EDGE('',*,*,#7829,.T.);+#7829=EDGE_CURVE('',#7825,#7830,#7832,.T.);+#7830=VERTEX_POINT('',#7831);+#7831=CARTESIAN_POINT('',(7.,0.51,0.85));+#7832=LINE('',#7826,#1576);+#7833=ORIENTED_EDGE('',*,*,#7834,.T.);+#7834=EDGE_CURVE('',#7830,#1738,#7832,.T.);+#7835=ORIENTED_EDGE('',*,*,#1737,.F.);+#7836=ORIENTED_EDGE('',*,*,#7813,.F.);+#7837=PLANE('',#7838);+#7838=AXIS2_PLACEMENT_3D('',#7815,#464,#1577);+#7839=ADVANCED_FACE('',(#7840),#435,.F.);+#7840=FACE_BOUND('',#7841,.F.);+#7841=EDGE_LOOP('',(#7842,#7843,#7847,#7851));+#7842=ORIENTED_EDGE('',*,*,#7834,.F.);+#7843=ORIENTED_EDGE('',*,*,#7844,.T.);+#7844=EDGE_CURVE('',#7830,#7845,#1567,.T.);+#7845=VERTEX_POINT('',#7846);+#7846=CARTESIAN_POINT('',(7.,0.29,0.85));+#7847=ORIENTED_EDGE('',*,*,#7848,.T.);+#7848=EDGE_CURVE('',#7845,#1742,#7849,.T.);+#7849=LINE('',#7850,#1576);+#7850=CARTESIAN_POINT('',(7.2,0.29,0.85));+#7851=ORIENTED_EDGE('',*,*,#1741,.F.);+#7852=ADVANCED_FACE('',(#7853),#7872,.F.);+#7853=FACE_BOUND('',#7854,.F.);+#7854=EDGE_LOOP('',(#7855,#7858,#7863,#7868,#7870,#7871));+#7855=ORIENTED_EDGE('',*,*,#7856,.F.);+#7856=EDGE_CURVE('',#7857,#7845,#7849,.T.);+#7857=VERTEX_POINT('',#7850);+#7858=ORIENTED_EDGE('',*,*,#7859,.T.);+#7859=EDGE_CURVE('',#7857,#7860,#7862,.T.);+#7860=VERTEX_POINT('',#7861);+#7861=CARTESIAN_POINT('',(7.2,0.11,0.85));+#7862=LINE('',#7850,#1568);+#7863=ORIENTED_EDGE('',*,*,#7864,.T.);+#7864=EDGE_CURVE('',#7860,#7865,#7867,.T.);+#7865=VERTEX_POINT('',#7866);+#7866=CARTESIAN_POINT('',(7.,0.11,0.85));+#7867=LINE('',#7861,#1576);+#7868=ORIENTED_EDGE('',*,*,#7869,.T.);+#7869=EDGE_CURVE('',#7865,#1746,#7867,.T.);+#7870=ORIENTED_EDGE('',*,*,#1745,.F.);+#7871=ORIENTED_EDGE('',*,*,#7848,.F.);+#7872=PLANE('',#7873);+#7873=AXIS2_PLACEMENT_3D('',#7850,#464,#1577);+#7874=ADVANCED_FACE('',(#7875),#435,.F.);+#7875=FACE_BOUND('',#7876,.F.);+#7876=EDGE_LOOP('',(#7877,#7878,#7882,#7886));+#7877=ORIENTED_EDGE('',*,*,#7869,.F.);+#7878=ORIENTED_EDGE('',*,*,#7879,.T.);+#7879=EDGE_CURVE('',#7865,#7880,#1567,.T.);+#7880=VERTEX_POINT('',#7881);+#7881=CARTESIAN_POINT('',(7.,-0.11,0.85));+#7882=ORIENTED_EDGE('',*,*,#7883,.T.);+#7883=EDGE_CURVE('',#7880,#1750,#7884,.T.);+#7884=LINE('',#7885,#1576);+#7885=CARTESIAN_POINT('',(7.2,-0.11,0.85));+#7886=ORIENTED_EDGE('',*,*,#1749,.F.);+#7887=ADVANCED_FACE('',(#7888),#7907,.F.);+#7888=FACE_BOUND('',#7889,.F.);+#7889=EDGE_LOOP('',(#7890,#7893,#7898,#7903,#7905,#7906));+#7890=ORIENTED_EDGE('',*,*,#7891,.F.);+#7891=EDGE_CURVE('',#7892,#7880,#7884,.T.);+#7892=VERTEX_POINT('',#7885);+#7893=ORIENTED_EDGE('',*,*,#7894,.T.);+#7894=EDGE_CURVE('',#7892,#7895,#7897,.T.);+#7895=VERTEX_POINT('',#7896);+#7896=CARTESIAN_POINT('',(7.2,-0.29,0.85));+#7897=LINE('',#7885,#1568);+#7898=ORIENTED_EDGE('',*,*,#7899,.T.);+#7899=EDGE_CURVE('',#7895,#7900,#7902,.T.);+#7900=VERTEX_POINT('',#7901);+#7901=CARTESIAN_POINT('',(7.,-0.29,0.85));+#7902=LINE('',#7896,#1576);+#7903=ORIENTED_EDGE('',*,*,#7904,.T.);+#7904=EDGE_CURVE('',#7900,#1754,#7902,.T.);+#7905=ORIENTED_EDGE('',*,*,#1753,.F.);+#7906=ORIENTED_EDGE('',*,*,#7883,.F.);+#7907=PLANE('',#7908);+#7908=AXIS2_PLACEMENT_3D('',#7885,#464,#1577);+#7909=ADVANCED_FACE('',(#7910),#435,.F.);+#7910=FACE_BOUND('',#7911,.F.);+#7911=EDGE_LOOP('',(#7912,#7913,#7917,#7921));+#7912=ORIENTED_EDGE('',*,*,#7904,.F.);+#7913=ORIENTED_EDGE('',*,*,#7914,.T.);+#7914=EDGE_CURVE('',#7900,#7915,#1567,.T.);+#7915=VERTEX_POINT('',#7916);+#7916=CARTESIAN_POINT('',(7.,-0.51,0.85));+#7917=ORIENTED_EDGE('',*,*,#7918,.T.);+#7918=EDGE_CURVE('',#7915,#1758,#7919,.T.);+#7919=LINE('',#7920,#1576);+#7920=CARTESIAN_POINT('',(7.2,-0.51,0.85));+#7921=ORIENTED_EDGE('',*,*,#1757,.F.);+#7922=ADVANCED_FACE('',(#7923),#7942,.F.);+#7923=FACE_BOUND('',#7924,.F.);+#7924=EDGE_LOOP('',(#7925,#7928,#7933,#7938,#7940,#7941));+#7925=ORIENTED_EDGE('',*,*,#7926,.F.);+#7926=EDGE_CURVE('',#7927,#7915,#7919,.T.);+#7927=VERTEX_POINT('',#7920);+#7928=ORIENTED_EDGE('',*,*,#7929,.T.);+#7929=EDGE_CURVE('',#7927,#7930,#7932,.T.);+#7930=VERTEX_POINT('',#7931);+#7931=CARTESIAN_POINT('',(7.2,-0.69,0.85));+#7932=LINE('',#7920,#1568);+#7933=ORIENTED_EDGE('',*,*,#7934,.T.);+#7934=EDGE_CURVE('',#7930,#7935,#7937,.T.);+#7935=VERTEX_POINT('',#7936);+#7936=CARTESIAN_POINT('',(7.,-0.69,0.85));+#7937=LINE('',#7931,#1576);+#7938=ORIENTED_EDGE('',*,*,#7939,.T.);+#7939=EDGE_CURVE('',#7935,#1762,#7937,.T.);+#7940=ORIENTED_EDGE('',*,*,#1761,.F.);+#7941=ORIENTED_EDGE('',*,*,#7918,.F.);+#7942=PLANE('',#7943);+#7943=AXIS2_PLACEMENT_3D('',#7920,#464,#1577);+#7944=ADVANCED_FACE('',(#7945),#435,.F.);+#7945=FACE_BOUND('',#7946,.F.);+#7946=EDGE_LOOP('',(#7947,#7948,#7952,#7956));+#7947=ORIENTED_EDGE('',*,*,#7939,.F.);+#7948=ORIENTED_EDGE('',*,*,#7949,.T.);+#7949=EDGE_CURVE('',#7935,#7950,#1567,.T.);+#7950=VERTEX_POINT('',#7951);+#7951=CARTESIAN_POINT('',(7.,-0.91,0.85));+#7952=ORIENTED_EDGE('',*,*,#7953,.T.);+#7953=EDGE_CURVE('',#7950,#1766,#7954,.T.);+#7954=LINE('',#7955,#1576);+#7955=CARTESIAN_POINT('',(7.2,-0.91,0.85));+#7956=ORIENTED_EDGE('',*,*,#1765,.F.);+#7957=ADVANCED_FACE('',(#7958),#7977,.F.);+#7958=FACE_BOUND('',#7959,.F.);+#7959=EDGE_LOOP('',(#7960,#7963,#7968,#7973,#7975,#7976));+#7960=ORIENTED_EDGE('',*,*,#7961,.F.);+#7961=EDGE_CURVE('',#7962,#7950,#7954,.T.);+#7962=VERTEX_POINT('',#7955);+#7963=ORIENTED_EDGE('',*,*,#7964,.T.);+#7964=EDGE_CURVE('',#7962,#7965,#7967,.T.);+#7965=VERTEX_POINT('',#7966);+#7966=CARTESIAN_POINT('',(7.2,-1.09,0.85));+#7967=LINE('',#7955,#1568);+#7968=ORIENTED_EDGE('',*,*,#7969,.T.);+#7969=EDGE_CURVE('',#7965,#7970,#7972,.T.);+#7970=VERTEX_POINT('',#7971);+#7971=CARTESIAN_POINT('',(7.,-1.09,0.85));+#7972=LINE('',#7966,#1576);+#7973=ORIENTED_EDGE('',*,*,#7974,.T.);+#7974=EDGE_CURVE('',#7970,#1770,#7972,.T.);+#7975=ORIENTED_EDGE('',*,*,#1769,.F.);+#7976=ORIENTED_EDGE('',*,*,#7953,.F.);+#7977=PLANE('',#7978);+#7978=AXIS2_PLACEMENT_3D('',#7955,#464,#1577);+#7979=ADVANCED_FACE('',(#7980),#435,.F.);+#7980=FACE_BOUND('',#7981,.F.);+#7981=EDGE_LOOP('',(#7982,#7983,#7987,#7991));+#7982=ORIENTED_EDGE('',*,*,#7974,.F.);+#7983=ORIENTED_EDGE('',*,*,#7984,.T.);+#7984=EDGE_CURVE('',#7970,#7985,#1567,.T.);+#7985=VERTEX_POINT('',#7986);+#7986=CARTESIAN_POINT('',(7.,-1.31,0.85));+#7987=ORIENTED_EDGE('',*,*,#7988,.T.);+#7988=EDGE_CURVE('',#7985,#1774,#7989,.T.);+#7989=LINE('',#7990,#1576);+#7990=CARTESIAN_POINT('',(7.2,-1.31,0.85));+#7991=ORIENTED_EDGE('',*,*,#1773,.F.);+#7992=ADVANCED_FACE('',(#7993),#8012,.F.);+#7993=FACE_BOUND('',#7994,.F.);+#7994=EDGE_LOOP('',(#7995,#7998,#8003,#8008,#8010,#8011));+#7995=ORIENTED_EDGE('',*,*,#7996,.F.);+#7996=EDGE_CURVE('',#7997,#7985,#7989,.T.);+#7997=VERTEX_POINT('',#7990);+#7998=ORIENTED_EDGE('',*,*,#7999,.T.);+#7999=EDGE_CURVE('',#7997,#8000,#8002,.T.);+#8000=VERTEX_POINT('',#8001);+#8001=CARTESIAN_POINT('',(7.2,-1.49,0.85));+#8002=LINE('',#7990,#1568);+#8003=ORIENTED_EDGE('',*,*,#8004,.T.);+#8004=EDGE_CURVE('',#8000,#8005,#8007,.T.);+#8005=VERTEX_POINT('',#8006);+#8006=CARTESIAN_POINT('',(7.,-1.49,0.85));+#8007=LINE('',#8001,#1576);+#8008=ORIENTED_EDGE('',*,*,#8009,.T.);+#8009=EDGE_CURVE('',#8005,#1778,#8007,.T.);+#8010=ORIENTED_EDGE('',*,*,#1777,.F.);+#8011=ORIENTED_EDGE('',*,*,#7988,.F.);+#8012=PLANE('',#8013);+#8013=AXIS2_PLACEMENT_3D('',#7990,#464,#1577);+#8014=ADVANCED_FACE('',(#8015),#435,.F.);+#8015=FACE_BOUND('',#8016,.F.);+#8016=EDGE_LOOP('',(#8017,#8018,#8022,#8026));+#8017=ORIENTED_EDGE('',*,*,#8009,.F.);+#8018=ORIENTED_EDGE('',*,*,#8019,.T.);+#8019=EDGE_CURVE('',#8005,#8020,#1567,.T.);+#8020=VERTEX_POINT('',#8021);+#8021=CARTESIAN_POINT('',(7.,-1.71,0.85));+#8022=ORIENTED_EDGE('',*,*,#8023,.T.);+#8023=EDGE_CURVE('',#8020,#1782,#8024,.T.);+#8024=LINE('',#8025,#1576);+#8025=CARTESIAN_POINT('',(7.2,-1.71,0.85));+#8026=ORIENTED_EDGE('',*,*,#1781,.F.);+#8027=ADVANCED_FACE('',(#8028),#8047,.F.);+#8028=FACE_BOUND('',#8029,.F.);+#8029=EDGE_LOOP('',(#8030,#8033,#8038,#8043,#8045,#8046));+#8030=ORIENTED_EDGE('',*,*,#8031,.F.);+#8031=EDGE_CURVE('',#8032,#8020,#8024,.T.);+#8032=VERTEX_POINT('',#8025);+#8033=ORIENTED_EDGE('',*,*,#8034,.T.);+#8034=EDGE_CURVE('',#8032,#8035,#8037,.T.);+#8035=VERTEX_POINT('',#8036);+#8036=CARTESIAN_POINT('',(7.2,-1.89,0.85));+#8037=LINE('',#8025,#1568);+#8038=ORIENTED_EDGE('',*,*,#8039,.T.);+#8039=EDGE_CURVE('',#8035,#8040,#8042,.T.);+#8040=VERTEX_POINT('',#8041);+#8041=CARTESIAN_POINT('',(7.,-1.89,0.85));+#8042=LINE('',#8036,#1576);+#8043=ORIENTED_EDGE('',*,*,#8044,.T.);+#8044=EDGE_CURVE('',#8040,#1786,#8042,.T.);+#8045=ORIENTED_EDGE('',*,*,#1785,.F.);+#8046=ORIENTED_EDGE('',*,*,#8023,.F.);+#8047=PLANE('',#8048);+#8048=AXIS2_PLACEMENT_3D('',#8025,#464,#1577);+#8049=ADVANCED_FACE('',(#8050),#435,.F.);+#8050=FACE_BOUND('',#8051,.F.);+#8051=EDGE_LOOP('',(#8052,#8053,#8057,#8061));+#8052=ORIENTED_EDGE('',*,*,#8044,.F.);+#8053=ORIENTED_EDGE('',*,*,#8054,.T.);+#8054=EDGE_CURVE('',#8040,#8055,#1567,.T.);+#8055=VERTEX_POINT('',#8056);+#8056=CARTESIAN_POINT('',(7.,-2.11,0.85));+#8057=ORIENTED_EDGE('',*,*,#8058,.T.);+#8058=EDGE_CURVE('',#8055,#1790,#8059,.T.);+#8059=LINE('',#8060,#1576);+#8060=CARTESIAN_POINT('',(7.2,-2.11,0.85));+#8061=ORIENTED_EDGE('',*,*,#1789,.F.);+#8062=ADVANCED_FACE('',(#8063),#8082,.F.);+#8063=FACE_BOUND('',#8064,.F.);+#8064=EDGE_LOOP('',(#8065,#8068,#8073,#8078,#8080,#8081));+#8065=ORIENTED_EDGE('',*,*,#8066,.F.);+#8066=EDGE_CURVE('',#8067,#8055,#8059,.T.);+#8067=VERTEX_POINT('',#8060);+#8068=ORIENTED_EDGE('',*,*,#8069,.T.);+#8069=EDGE_CURVE('',#8067,#8070,#8072,.T.);+#8070=VERTEX_POINT('',#8071);+#8071=CARTESIAN_POINT('',(7.2,-2.29,0.85));+#8072=LINE('',#8060,#1568);+#8073=ORIENTED_EDGE('',*,*,#8074,.T.);+#8074=EDGE_CURVE('',#8070,#8075,#8077,.T.);+#8075=VERTEX_POINT('',#8076);+#8076=CARTESIAN_POINT('',(7.,-2.29,0.85));+#8077=LINE('',#8071,#1576);+#8078=ORIENTED_EDGE('',*,*,#8079,.T.);+#8079=EDGE_CURVE('',#8075,#1794,#8077,.T.);+#8080=ORIENTED_EDGE('',*,*,#1793,.F.);+#8081=ORIENTED_EDGE('',*,*,#8058,.F.);+#8082=PLANE('',#8083);+#8083=AXIS2_PLACEMENT_3D('',#8060,#464,#1577);+#8084=ADVANCED_FACE('',(#8085),#435,.F.);+#8085=FACE_BOUND('',#8086,.F.);+#8086=EDGE_LOOP('',(#8087,#8088,#8092,#8096));+#8087=ORIENTED_EDGE('',*,*,#8079,.F.);+#8088=ORIENTED_EDGE('',*,*,#8089,.T.);+#8089=EDGE_CURVE('',#8075,#8090,#1567,.T.);+#8090=VERTEX_POINT('',#8091);+#8091=CARTESIAN_POINT('',(7.,-2.51,0.85));+#8092=ORIENTED_EDGE('',*,*,#8093,.T.);+#8093=EDGE_CURVE('',#8090,#1798,#8094,.T.);+#8094=LINE('',#8095,#1576);+#8095=CARTESIAN_POINT('',(7.2,-2.51,0.85));+#8096=ORIENTED_EDGE('',*,*,#1797,.F.);+#8097=ADVANCED_FACE('',(#8098),#8117,.F.);+#8098=FACE_BOUND('',#8099,.F.);+#8099=EDGE_LOOP('',(#8100,#8103,#8108,#8113,#8115,#8116));+#8100=ORIENTED_EDGE('',*,*,#8101,.F.);+#8101=EDGE_CURVE('',#8102,#8090,#8094,.T.);+#8102=VERTEX_POINT('',#8095);+#8103=ORIENTED_EDGE('',*,*,#8104,.T.);+#8104=EDGE_CURVE('',#8102,#8105,#8107,.T.);+#8105=VERTEX_POINT('',#8106);+#8106=CARTESIAN_POINT('',(7.2,-2.69,0.85));+#8107=LINE('',#8095,#1568);+#8108=ORIENTED_EDGE('',*,*,#8109,.T.);+#8109=EDGE_CURVE('',#8105,#8110,#8112,.T.);+#8110=VERTEX_POINT('',#8111);+#8111=CARTESIAN_POINT('',(7.,-2.69,0.85));+#8112=LINE('',#8106,#1576);+#8113=ORIENTED_EDGE('',*,*,#8114,.T.);+#8114=EDGE_CURVE('',#8110,#1802,#8112,.T.);+#8115=ORIENTED_EDGE('',*,*,#1801,.F.);+#8116=ORIENTED_EDGE('',*,*,#8093,.F.);+#8117=PLANE('',#8118);+#8118=AXIS2_PLACEMENT_3D('',#8095,#464,#1577);+#8119=ADVANCED_FACE('',(#8120),#435,.F.);+#8120=FACE_BOUND('',#8121,.F.);+#8121=EDGE_LOOP('',(#8122,#8123,#8127,#8131));+#8122=ORIENTED_EDGE('',*,*,#8114,.F.);+#8123=ORIENTED_EDGE('',*,*,#8124,.T.);+#8124=EDGE_CURVE('',#8110,#8125,#1567,.T.);+#8125=VERTEX_POINT('',#8126);+#8126=CARTESIAN_POINT('',(7.,-2.91,0.85));+#8127=ORIENTED_EDGE('',*,*,#8128,.T.);+#8128=EDGE_CURVE('',#8125,#1806,#8129,.T.);+#8129=LINE('',#8130,#1576);+#8130=CARTESIAN_POINT('',(7.2,-2.91,0.85));+#8131=ORIENTED_EDGE('',*,*,#1805,.F.);+#8132=ADVANCED_FACE('',(#8133),#8152,.F.);+#8133=FACE_BOUND('',#8134,.F.);+#8134=EDGE_LOOP('',(#8135,#8138,#8143,#8148,#8150,#8151));+#8135=ORIENTED_EDGE('',*,*,#8136,.F.);+#8136=EDGE_CURVE('',#8137,#8125,#8129,.T.);+#8137=VERTEX_POINT('',#8130);+#8138=ORIENTED_EDGE('',*,*,#8139,.T.);+#8139=EDGE_CURVE('',#8137,#8140,#8142,.T.);+#8140=VERTEX_POINT('',#8141);+#8141=CARTESIAN_POINT('',(7.2,-3.09,0.85));+#8142=LINE('',#8130,#1568);+#8143=ORIENTED_EDGE('',*,*,#8144,.T.);+#8144=EDGE_CURVE('',#8140,#8145,#8147,.T.);+#8145=VERTEX_POINT('',#8146);+#8146=CARTESIAN_POINT('',(7.,-3.09,0.85));+#8147=LINE('',#8141,#1576);+#8148=ORIENTED_EDGE('',*,*,#8149,.T.);+#8149=EDGE_CURVE('',#8145,#1810,#8147,.T.);+#8150=ORIENTED_EDGE('',*,*,#1809,.F.);+#8151=ORIENTED_EDGE('',*,*,#8128,.F.);+#8152=PLANE('',#8153);+#8153=AXIS2_PLACEMENT_3D('',#8130,#464,#1577);+#8154=ADVANCED_FACE('',(#8155),#435,.F.);+#8155=FACE_BOUND('',#8156,.F.);+#8156=EDGE_LOOP('',(#8157,#8158,#8162,#8166));+#8157=ORIENTED_EDGE('',*,*,#8149,.F.);+#8158=ORIENTED_EDGE('',*,*,#8159,.T.);+#8159=EDGE_CURVE('',#8145,#8160,#1567,.T.);+#8160=VERTEX_POINT('',#8161);+#8161=CARTESIAN_POINT('',(7.,-3.31,0.85));+#8162=ORIENTED_EDGE('',*,*,#8163,.T.);+#8163=EDGE_CURVE('',#8160,#1814,#8164,.T.);+#8164=LINE('',#8165,#1576);+#8165=CARTESIAN_POINT('',(7.2,-3.31,0.85));+#8166=ORIENTED_EDGE('',*,*,#1813,.F.);+#8167=ADVANCED_FACE('',(#8168),#8187,.F.);+#8168=FACE_BOUND('',#8169,.F.);+#8169=EDGE_LOOP('',(#8170,#8173,#8178,#8183,#8185,#8186));+#8170=ORIENTED_EDGE('',*,*,#8171,.F.);+#8171=EDGE_CURVE('',#8172,#8160,#8164,.T.);+#8172=VERTEX_POINT('',#8165);+#8173=ORIENTED_EDGE('',*,*,#8174,.T.);+#8174=EDGE_CURVE('',#8172,#8175,#8177,.T.);+#8175=VERTEX_POINT('',#8176);+#8176=CARTESIAN_POINT('',(7.2,-3.49,0.85));+#8177=LINE('',#8165,#1568);+#8178=ORIENTED_EDGE('',*,*,#8179,.T.);+#8179=EDGE_CURVE('',#8175,#8180,#8182,.T.);+#8180=VERTEX_POINT('',#8181);+#8181=CARTESIAN_POINT('',(7.,-3.49,0.85));+#8182=LINE('',#8176,#1576);+#8183=ORIENTED_EDGE('',*,*,#8184,.T.);+#8184=EDGE_CURVE('',#8180,#1818,#8182,.T.);+#8185=ORIENTED_EDGE('',*,*,#1817,.F.);+#8186=ORIENTED_EDGE('',*,*,#8163,.F.);+#8187=PLANE('',#8188);+#8188=AXIS2_PLACEMENT_3D('',#8165,#464,#1577);+#8189=ADVANCED_FACE('',(#8190),#435,.F.);+#8190=FACE_BOUND('',#8191,.F.);+#8191=EDGE_LOOP('',(#8192,#8193,#8197,#8201));+#8192=ORIENTED_EDGE('',*,*,#8184,.F.);+#8193=ORIENTED_EDGE('',*,*,#8194,.T.);+#8194=EDGE_CURVE('',#8180,#8195,#1567,.T.);+#8195=VERTEX_POINT('',#8196);+#8196=CARTESIAN_POINT('',(7.,-3.71,0.85));+#8197=ORIENTED_EDGE('',*,*,#8198,.T.);+#8198=EDGE_CURVE('',#8195,#1822,#8199,.T.);+#8199=LINE('',#8200,#1576);+#8200=CARTESIAN_POINT('',(7.2,-3.71,0.85));+#8201=ORIENTED_EDGE('',*,*,#1821,.F.);+#8202=ADVANCED_FACE('',(#8203),#8222,.F.);+#8203=FACE_BOUND('',#8204,.F.);+#8204=EDGE_LOOP('',(#8205,#8208,#8213,#8218,#8220,#8221));+#8205=ORIENTED_EDGE('',*,*,#8206,.F.);+#8206=EDGE_CURVE('',#8207,#8195,#8199,.T.);+#8207=VERTEX_POINT('',#8200);+#8208=ORIENTED_EDGE('',*,*,#8209,.T.);+#8209=EDGE_CURVE('',#8207,#8210,#8212,.T.);+#8210=VERTEX_POINT('',#8211);+#8211=CARTESIAN_POINT('',(7.2,-3.89,0.85));+#8212=LINE('',#8200,#1568);+#8213=ORIENTED_EDGE('',*,*,#8214,.T.);+#8214=EDGE_CURVE('',#8210,#8215,#8217,.T.);+#8215=VERTEX_POINT('',#8216);+#8216=CARTESIAN_POINT('',(7.,-3.89,0.85));+#8217=LINE('',#8211,#1576);+#8218=ORIENTED_EDGE('',*,*,#8219,.T.);+#8219=EDGE_CURVE('',#8215,#1826,#8217,.T.);+#8220=ORIENTED_EDGE('',*,*,#1825,.F.);+#8221=ORIENTED_EDGE('',*,*,#8198,.F.);+#8222=PLANE('',#8223);+#8223=AXIS2_PLACEMENT_3D('',#8200,#464,#1577);+#8224=ADVANCED_FACE('',(#8225),#435,.F.);+#8225=FACE_BOUND('',#8226,.F.);+#8226=EDGE_LOOP('',(#8227,#8228,#8232,#8236));+#8227=ORIENTED_EDGE('',*,*,#8219,.F.);+#8228=ORIENTED_EDGE('',*,*,#8229,.T.);+#8229=EDGE_CURVE('',#8215,#8230,#1567,.T.);+#8230=VERTEX_POINT('',#8231);+#8231=CARTESIAN_POINT('',(7.,-4.11,0.85));+#8232=ORIENTED_EDGE('',*,*,#8233,.T.);+#8233=EDGE_CURVE('',#8230,#1830,#8234,.T.);+#8234=LINE('',#8235,#1576);+#8235=CARTESIAN_POINT('',(7.2,-4.11,0.85));+#8236=ORIENTED_EDGE('',*,*,#1829,.F.);+#8237=ADVANCED_FACE('',(#8238),#8257,.F.);+#8238=FACE_BOUND('',#8239,.F.);+#8239=EDGE_LOOP('',(#8240,#8243,#8248,#8253,#8255,#8256));+#8240=ORIENTED_EDGE('',*,*,#8241,.F.);+#8241=EDGE_CURVE('',#8242,#8230,#8234,.T.);+#8242=VERTEX_POINT('',#8235);+#8243=ORIENTED_EDGE('',*,*,#8244,.T.);+#8244=EDGE_CURVE('',#8242,#8245,#8247,.T.);+#8245=VERTEX_POINT('',#8246);+#8246=CARTESIAN_POINT('',(7.2,-4.29,0.85));+#8247=LINE('',#8235,#1568);+#8248=ORIENTED_EDGE('',*,*,#8249,.T.);+#8249=EDGE_CURVE('',#8245,#8250,#8252,.T.);+#8250=VERTEX_POINT('',#8251);+#8251=CARTESIAN_POINT('',(7.,-4.29,0.85));+#8252=LINE('',#8246,#1576);+#8253=ORIENTED_EDGE('',*,*,#8254,.T.);+#8254=EDGE_CURVE('',#8250,#1834,#8252,.T.);+#8255=ORIENTED_EDGE('',*,*,#1833,.F.);+#8256=ORIENTED_EDGE('',*,*,#8233,.F.);+#8257=PLANE('',#8258);+#8258=AXIS2_PLACEMENT_3D('',#8235,#464,#1577);+#8259=ADVANCED_FACE('',(#8260),#435,.F.);+#8260=FACE_BOUND('',#8261,.F.);+#8261=EDGE_LOOP('',(#8262,#8263,#8267,#8271));+#8262=ORIENTED_EDGE('',*,*,#8254,.F.);+#8263=ORIENTED_EDGE('',*,*,#8264,.T.);+#8264=EDGE_CURVE('',#8250,#8265,#1567,.T.);+#8265=VERTEX_POINT('',#8266);+#8266=CARTESIAN_POINT('',(7.,-4.51,0.85));+#8267=ORIENTED_EDGE('',*,*,#8268,.T.);+#8268=EDGE_CURVE('',#8265,#1838,#8269,.T.);+#8269=LINE('',#8270,#1576);+#8270=CARTESIAN_POINT('',(7.2,-4.51,0.85));+#8271=ORIENTED_EDGE('',*,*,#1837,.F.);+#8272=ADVANCED_FACE('',(#8273),#8292,.F.);+#8273=FACE_BOUND('',#8274,.F.);+#8274=EDGE_LOOP('',(#8275,#8278,#8283,#8288,#8290,#8291));+#8275=ORIENTED_EDGE('',*,*,#8276,.F.);+#8276=EDGE_CURVE('',#8277,#8265,#8269,.T.);+#8277=VERTEX_POINT('',#8270);+#8278=ORIENTED_EDGE('',*,*,#8279,.T.);+#8279=EDGE_CURVE('',#8277,#8280,#8282,.T.);+#8280=VERTEX_POINT('',#8281);+#8281=CARTESIAN_POINT('',(7.2,-4.69,0.85));+#8282=LINE('',#8270,#1568);+#8283=ORIENTED_EDGE('',*,*,#8284,.T.);+#8284=EDGE_CURVE('',#8280,#8285,#8287,.T.);+#8285=VERTEX_POINT('',#8286);+#8286=CARTESIAN_POINT('',(7.,-4.69,0.85));+#8287=LINE('',#8281,#1576);+#8288=ORIENTED_EDGE('',*,*,#8289,.T.);+#8289=EDGE_CURVE('',#8285,#1842,#8287,.T.);+#8290=ORIENTED_EDGE('',*,*,#1841,.F.);+#8291=ORIENTED_EDGE('',*,*,#8268,.F.);+#8292=PLANE('',#8293);+#8293=AXIS2_PLACEMENT_3D('',#8270,#464,#1577);+#8294=ADVANCED_FACE('',(#8295),#435,.F.);+#8295=FACE_BOUND('',#8296,.F.);+#8296=EDGE_LOOP('',(#8297,#8298,#8302,#8306));+#8297=ORIENTED_EDGE('',*,*,#8289,.F.);+#8298=ORIENTED_EDGE('',*,*,#8299,.T.);+#8299=EDGE_CURVE('',#8285,#8300,#1567,.T.);+#8300=VERTEX_POINT('',#8301);+#8301=CARTESIAN_POINT('',(7.,-4.91,0.85));+#8302=ORIENTED_EDGE('',*,*,#8303,.T.);+#8303=EDGE_CURVE('',#8300,#1846,#8304,.T.);+#8304=LINE('',#8305,#1576);+#8305=CARTESIAN_POINT('',(7.2,-4.91,0.85));+#8306=ORIENTED_EDGE('',*,*,#1845,.F.);+#8307=ADVANCED_FACE('',(#8308),#8327,.F.);+#8308=FACE_BOUND('',#8309,.F.);+#8309=EDGE_LOOP('',(#8310,#8313,#8318,#8323,#8325,#8326));+#8310=ORIENTED_EDGE('',*,*,#8311,.F.);+#8311=EDGE_CURVE('',#8312,#8300,#8304,.T.);+#8312=VERTEX_POINT('',#8305);+#8313=ORIENTED_EDGE('',*,*,#8314,.T.);+#8314=EDGE_CURVE('',#8312,#8315,#8317,.T.);+#8315=VERTEX_POINT('',#8316);+#8316=CARTESIAN_POINT('',(7.2,-5.09,0.85));+#8317=LINE('',#8305,#1568);+#8318=ORIENTED_EDGE('',*,*,#8319,.T.);+#8319=EDGE_CURVE('',#8315,#8320,#8322,.T.);+#8320=VERTEX_POINT('',#8321);+#8321=CARTESIAN_POINT('',(7.,-5.09,0.85));+#8322=LINE('',#8316,#1576);+#8323=ORIENTED_EDGE('',*,*,#8324,.T.);+#8324=EDGE_CURVE('',#8320,#1850,#8322,.T.);+#8325=ORIENTED_EDGE('',*,*,#1849,.F.);+#8326=ORIENTED_EDGE('',*,*,#8303,.F.);+#8327=PLANE('',#8328);+#8328=AXIS2_PLACEMENT_3D('',#8305,#464,#1577);+#8329=ADVANCED_FACE('',(#8330),#435,.F.);+#8330=FACE_BOUND('',#8331,.F.);+#8331=EDGE_LOOP('',(#8332,#8333,#8337,#8341));+#8332=ORIENTED_EDGE('',*,*,#8324,.F.);+#8333=ORIENTED_EDGE('',*,*,#8334,.T.);+#8334=EDGE_CURVE('',#8320,#8335,#1567,.T.);+#8335=VERTEX_POINT('',#8336);+#8336=CARTESIAN_POINT('',(7.,-5.31,0.85));+#8337=ORIENTED_EDGE('',*,*,#8338,.T.);+#8338=EDGE_CURVE('',#8335,#1854,#8339,.T.);+#8339=LINE('',#8340,#1576);+#8340=CARTESIAN_POINT('',(7.2,-5.31,0.85));+#8341=ORIENTED_EDGE('',*,*,#1853,.F.);+#8342=ADVANCED_FACE('',(#8343),#8362,.F.);+#8343=FACE_BOUND('',#8344,.F.);+#8344=EDGE_LOOP('',(#8345,#8348,#8353,#8358,#8360,#8361));+#8345=ORIENTED_EDGE('',*,*,#8346,.F.);+#8346=EDGE_CURVE('',#8347,#8335,#8339,.T.);+#8347=VERTEX_POINT('',#8340);+#8348=ORIENTED_EDGE('',*,*,#8349,.T.);+#8349=EDGE_CURVE('',#8347,#8350,#8352,.T.);+#8350=VERTEX_POINT('',#8351);+#8351=CARTESIAN_POINT('',(7.2,-5.49,0.85));+#8352=LINE('',#8340,#1568);+#8353=ORIENTED_EDGE('',*,*,#8354,.T.);+#8354=EDGE_CURVE('',#8350,#8355,#8357,.T.);+#8355=VERTEX_POINT('',#8356);+#8356=CARTESIAN_POINT('',(7.,-5.49,0.85));+#8357=LINE('',#8351,#1576);+#8358=ORIENTED_EDGE('',*,*,#8359,.T.);+#8359=EDGE_CURVE('',#8355,#1858,#8357,.T.);+#8360=ORIENTED_EDGE('',*,*,#1857,.F.);+#8361=ORIENTED_EDGE('',*,*,#8338,.F.);+#8362=PLANE('',#8363);+#8363=AXIS2_PLACEMENT_3D('',#8340,#464,#1577);+#8364=ADVANCED_FACE('',(#8365),#435,.F.);+#8365=FACE_BOUND('',#8366,.F.);+#8366=EDGE_LOOP('',(#8367,#8368,#8372,#8376));+#8367=ORIENTED_EDGE('',*,*,#8359,.F.);+#8368=ORIENTED_EDGE('',*,*,#8369,.T.);+#8369=EDGE_CURVE('',#8355,#8370,#1567,.T.);+#8370=VERTEX_POINT('',#8371);+#8371=CARTESIAN_POINT('',(7.,-5.71,0.85));+#8372=ORIENTED_EDGE('',*,*,#8373,.T.);+#8373=EDGE_CURVE('',#8370,#1862,#8374,.T.);+#8374=LINE('',#8375,#1576);+#8375=CARTESIAN_POINT('',(7.2,-5.71,0.85));+#8376=ORIENTED_EDGE('',*,*,#1861,.F.);+#8377=ADVANCED_FACE('',(#8378),#8397,.F.);+#8378=FACE_BOUND('',#8379,.F.);+#8379=EDGE_LOOP('',(#8380,#8383,#8388,#8393,#8395,#8396));+#8380=ORIENTED_EDGE('',*,*,#8381,.F.);+#8381=EDGE_CURVE('',#8382,#8370,#8374,.T.);+#8382=VERTEX_POINT('',#8375);+#8383=ORIENTED_EDGE('',*,*,#8384,.T.);+#8384=EDGE_CURVE('',#8382,#8385,#8387,.T.);+#8385=VERTEX_POINT('',#8386);+#8386=CARTESIAN_POINT('',(7.2,-5.89,0.85));+#8387=LINE('',#8375,#1568);+#8388=ORIENTED_EDGE('',*,*,#8389,.T.);+#8389=EDGE_CURVE('',#8385,#8390,#8392,.T.);+#8390=VERTEX_POINT('',#8391);+#8391=CARTESIAN_POINT('',(7.,-5.89,0.85));+#8392=LINE('',#8386,#1576);+#8393=ORIENTED_EDGE('',*,*,#8394,.T.);+#8394=EDGE_CURVE('',#8390,#1866,#8392,.T.);+#8395=ORIENTED_EDGE('',*,*,#1865,.F.);+#8396=ORIENTED_EDGE('',*,*,#8373,.F.);+#8397=PLANE('',#8398);+#8398=AXIS2_PLACEMENT_3D('',#8375,#464,#1577);+#8399=ADVANCED_FACE('',(#8400),#435,.F.);+#8400=FACE_BOUND('',#8401,.F.);+#8401=EDGE_LOOP('',(#8402,#8403,#8407,#8411));+#8402=ORIENTED_EDGE('',*,*,#8394,.F.);+#8403=ORIENTED_EDGE('',*,*,#8404,.T.);+#8404=EDGE_CURVE('',#8390,#8405,#1567,.T.);+#8405=VERTEX_POINT('',#8406);+#8406=CARTESIAN_POINT('',(7.,-6.11,0.85));+#8407=ORIENTED_EDGE('',*,*,#8408,.T.);+#8408=EDGE_CURVE('',#8405,#1870,#8409,.T.);+#8409=LINE('',#8410,#1576);+#8410=CARTESIAN_POINT('',(7.2,-6.11,0.85));+#8411=ORIENTED_EDGE('',*,*,#1869,.F.);+#8412=ADVANCED_FACE('',(#8413),#8432,.F.);+#8413=FACE_BOUND('',#8414,.F.);+#8414=EDGE_LOOP('',(#8415,#8418,#8423,#8428,#8430,#8431));+#8415=ORIENTED_EDGE('',*,*,#8416,.F.);+#8416=EDGE_CURVE('',#8417,#8405,#8409,.T.);+#8417=VERTEX_POINT('',#8410);+#8418=ORIENTED_EDGE('',*,*,#8419,.T.);+#8419=EDGE_CURVE('',#8417,#8420,#8422,.T.);+#8420=VERTEX_POINT('',#8421);+#8421=CARTESIAN_POINT('',(7.2,-6.29,0.85));+#8422=LINE('',#8410,#1568);+#8423=ORIENTED_EDGE('',*,*,#8424,.T.);+#8424=EDGE_CURVE('',#8420,#8425,#8427,.T.);+#8425=VERTEX_POINT('',#8426);+#8426=CARTESIAN_POINT('',(7.,-6.29,0.85));+#8427=LINE('',#8421,#1576);+#8428=ORIENTED_EDGE('',*,*,#8429,.T.);+#8429=EDGE_CURVE('',#8425,#1874,#8427,.T.);+#8430=ORIENTED_EDGE('',*,*,#1873,.F.);+#8431=ORIENTED_EDGE('',*,*,#8408,.F.);+#8432=PLANE('',#8433);+#8433=AXIS2_PLACEMENT_3D('',#8410,#464,#1577);+#8434=ADVANCED_FACE('',(#8435),#435,.F.);+#8435=FACE_BOUND('',#8436,.F.);+#8436=EDGE_LOOP('',(#8437,#8438,#8442,#8447,#8452,#8460,#8463,#8464));+#8437=ORIENTED_EDGE('',*,*,#8429,.F.);+#8438=ORIENTED_EDGE('',*,*,#8439,.T.);+#8439=EDGE_CURVE('',#8425,#8440,#1567,.T.);+#8440=VERTEX_POINT('',#8441);+#8441=CARTESIAN_POINT('',(7.,-6.825,0.85));+#8442=ORIENTED_EDGE('',*,*,#8443,.T.);+#8443=EDGE_CURVE('',#8440,#8444,#8446,.T.);+#8444=VERTEX_POINT('',#8445);+#8445=CARTESIAN_POINT('',(6.825,-7.,0.85));+#8446=LINE('',#8441,#7319);+#8447=ORIENTED_EDGE('',*,*,#8448,.T.);+#8448=EDGE_CURVE('',#8444,#8449,#8451,.T.);+#8449=VERTEX_POINT('',#8450);+#8450=CARTESIAN_POINT('',(6.29,-7.,0.85));+#8451=LINE('',#8445,#1576);+#8452=ORIENTED_EDGE('',*,*,#8453,.T.);+#8453=EDGE_CURVE('',#8449,#8454,#8456,.T.);+#8454=VERTEX_POINT('',#8455);+#8455=CARTESIAN_POINT('',(6.29,-6.925,0.85));+#8456=LINE('',#8457,#8458);+#8457=CARTESIAN_POINT('',(6.29,-7.2,0.85));+#8458=VECTOR('',#8459,1.);+#8459=DIRECTION('',(1.110223024625E-16,1.,0.));+#8460=ORIENTED_EDGE('',*,*,#8461,.F.);+#8461=EDGE_CURVE('',#7301,#8454,#8462,.T.);+#8462=LINE('',#7302,#1576);+#8463=ORIENTED_EDGE('',*,*,#7317,.F.);+#8464=ORIENTED_EDGE('',*,*,#1877,.F.);+#8465=ADVANCED_FACE('',(#8466),#8482,.T.);+#8466=FACE_BOUND('',#8467,.T.);+#8467=EDGE_LOOP('',(#8468,#8480,#8481,#2083));+#8468=ORIENTED_EDGE('',*,*,#8469,.T.);+#8469=EDGE_CURVE('',#2085,#1955,#8470,.T.);+#8470=B_SPLINE_CURVE_WITH_KNOTS('',8,(#8471,#8472,#8473,#8474,#8475,#8476,#8477,#8478,#8479),.UNSPECIFIED.,.F.,.F.,(9,9),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8471=CARTESIAN_POINT('',(-6.795124813083,-6.722568209866,1.460996513181));+#8472=CARTESIAN_POINT('',(-6.79340419061,-6.721855504702,1.468628450826));+#8473=CARTESIAN_POINT('',(-6.790211350105,-6.720532986862,1.476427534575));+#8474=CARTESIAN_POINT('',(-6.785339012167,-6.718514798409,1.483943009305));+#8475=CARTESIAN_POINT('',(-6.778744741123,-6.715783361904,1.490584376374));+#8476=CARTESIAN_POINT('',(-6.770804485249,-6.712494400239,1.495536600977));+#8477=CARTESIAN_POINT('',(-6.762422617513,-6.709022516939,1.498611518734));+#8478=CARTESIAN_POINT('',(-6.754138333162,-6.70559105401,1.500000286476));+#8479=CARTESIAN_POINT('',(-6.746349033255,-6.702364620345,1.5));+#8480=ORIENTED_EDGE('',*,*,#1954,.T.);+#8481=ORIENTED_EDGE('',*,*,#1915,.F.);+#8482=( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,2,((#2088,#2089,#2090,#2091,#2092),(#8483,#8484,#8485,#8486,#8487),(#1958,#1959,#1960,#1961,#1962)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,1,1,3),(0.,13.517816638234),(-0.698356801641,-4.048920165974E-02,13.477327436574,14.135195036556),.UNSPECIFIED.) GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE(((1.,1.,1.,1.,1.),(0.777145961457,0.777145961457,0.777145961457,0.777145961457,0.777145961457),(1.,1.,1.,1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#8483=CARTESIAN_POINT('',(-6.786838234914,-7.416775919098,1.5));+#8484=CARTESIAN_POINT('',(-6.786838234914,-7.087842119108,1.5));+#8485=CARTESIAN_POINT('',(-6.786838234914,-1.89636248505E-15,1.5));+#8486=CARTESIAN_POINT('',(-6.786838234914,7.087842119108,1.5));+#8487=CARTESIAN_POINT('',(-6.786838234914,7.416775919098,1.5));+#8488=ADVANCED_FACE('',(#8489),#8520,.T.);+#8489=FACE_BOUND('',#8490,.T.);+#8490=EDGE_LOOP('',(#8491,#8510,#8511,#8512));+#8491=ORIENTED_EDGE('',*,*,#8492,.T.);+#8492=EDGE_CURVE('',#8493,#1965,#8495,.T.);+#8493=VERTEX_POINT('',#8494);+#8494=CARTESIAN_POINT('',(-6.722628206646,-6.795256413291,1.460395584541));+#8495=B_SPLINE_CURVE_WITH_KNOTS('',7,(#8496,#8497,#8498,#8499,#8500,#8501,#8502,#8503,#8504,#8505,#8506,#8507,#8508,#8509),.UNSPECIFIED.,.F.,.F.,(8,6,8),(0.,0.290658527775,1.),.UNSPECIFIED.);+#8496=CARTESIAN_POINT('',(-6.722568209866,-6.795124813083,1.460996513181));+#8497=CARTESIAN_POINT('',(-6.722331462565,-6.794553254539,1.463531699856));+#8498=CARTESIAN_POINT('',(-6.722026069695,-6.793815970929,1.466085556996));+#8499=CARTESIAN_POINT('',(-6.721648522979,-6.792904492528,1.468640881423));+#8500=CARTESIAN_POINT('',(-6.72119652683,-6.791813277295,1.471177446977));+#8501=CARTESIAN_POINT('',(-6.720669293247,-6.790540422829,1.473673186734));+#8502=CARTESIAN_POINT('',(-6.720067836719,-6.78908837832,1.476105375209));+#8503=CARTESIAN_POINT('',(-6.717753892579,-6.783502022995,1.484178199972));+#8504=CARTESIAN_POINT('',(-6.715688862947,-6.778516600455,1.489393677676));+#8505=CARTESIAN_POINT('',(-6.713244394352,-6.772615131207,1.493780948123));+#8506=CARTESIAN_POINT('',(-6.710531372188,-6.76606531633,1.497036425013));+#8507=CARTESIAN_POINT('',(-6.707732767695,-6.759308887375,1.499068449151));+#8508=CARTESIAN_POINT('',(-6.704980347025,-6.752663956089,1.500000203963));+#8509=CARTESIAN_POINT('',(-6.702364620347,-6.746349033255,1.5));+#8510=ORIENTED_EDGE('',*,*,#1964,.T.);+#8511=ORIENTED_EDGE('',*,*,#8469,.F.);+#8512=ORIENTED_EDGE('',*,*,#8513,.F.);+#8513=EDGE_CURVE('',#8493,#2085,#8514,.T.);+#8514=B_SPLINE_CURVE_WITH_KNOTS('',2,(#8515,#8516,#8517,#8518,#8519),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.28964361549,-3.998243263536E-02,0.136741676868,0.386402859722),.UNSPECIFIED.);+#8515=CARTESIAN_POINT('',(-6.519827987965,-6.997865034984,1.460996513181));+#8516=CARTESIAN_POINT('',(-6.608096545662,-6.909596477286,1.460996513181));+#8517=CARTESIAN_POINT('',(-6.758846511474,-6.758846511474,1.460996513181));+#8518=CARTESIAN_POINT('',(-6.909596477286,-6.608096545662,1.460996513181));+#8519=CARTESIAN_POINT('',(-6.997865034984,-6.519827987965,1.460996513181));+#8520=( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,2,((#8515,#8516,#8517,#8518,#8519),(#8521,#8522,#8523,#8524,#8525),(#1968,#1969,#1970,#1971,#1972)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,1,1,3),(0.,0.176724109503),(-0.28964361549,-3.998243263536E-02,0.136741676868,0.386402859722),.UNSPECIFIED.) GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE(((1.,1.,1.,1.,1.),(0.781002645201,0.781002645201,0.781002645201,0.781002645201,0.781002645201),(1.,1.,1.,1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#8521=CARTESIAN_POINT('',(-6.513610152676,-6.991647199696,1.5));+#8522=CARTESIAN_POINT('',(-6.601878710374,-6.903378641998,1.5));+#8523=CARTESIAN_POINT('',(-6.752628676186,-6.752628676186,1.5));+#8524=CARTESIAN_POINT('',(-6.903378641998,-6.601878710374,1.5));+#8525=CARTESIAN_POINT('',(-6.991647199696,-6.513610152676,1.5));+#8526=ADVANCED_FACE('',(#8527),#8543,.T.);+#8527=FACE_BOUND('',#8528,.T.);+#8528=EDGE_LOOP('',(#8529,#8530,#8531,#7307));+#8529=ORIENTED_EDGE('',*,*,#7327,.T.);+#8530=ORIENTED_EDGE('',*,*,#1984,.T.);+#8531=ORIENTED_EDGE('',*,*,#8532,.F.);+#8532=EDGE_CURVE('',#7303,#1975,#8533,.T.);+#8533=B_SPLINE_CURVE_WITH_KNOTS('',8,(#8534,#8535,#8536,#8537,#8538,#8539,#8540,#8541,#8542),.UNSPECIFIED.,.F.,.F.,(9,9),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8534=CARTESIAN_POINT('',(6.722568209866,-6.795124813083,1.460996513181));+#8535=CARTESIAN_POINT('',(6.721855504702,-6.79340419061,1.468628450826));+#8536=CARTESIAN_POINT('',(6.720532986862,-6.790211350105,1.476427534576));+#8537=CARTESIAN_POINT('',(6.718514798409,-6.785339012167,1.483943009305));+#8538=CARTESIAN_POINT('',(6.715783361904,-6.778744741123,1.490584376375));+#8539=CARTESIAN_POINT('',(6.712494400239,-6.770804485248,1.495536600977));+#8540=CARTESIAN_POINT('',(6.709022516939,-6.762422617513,1.498611518734));+#8541=CARTESIAN_POINT('',(6.70559105401,-6.754138333162,1.500000286476));+#8542=CARTESIAN_POINT('',(6.702364620345,-6.746349033255,1.5));+#8543=( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,2,((#7310,#7311,#7312,#7313,#7314),(#8544,#8545,#8546,#8547,#8548),(#1988,#1989,#1990,#1991,#1992)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,1,1,3),(0.,0.176724109503),(-0.28964361549,-3.998243263536E-02,0.136741676868,0.386402859722),.UNSPECIFIED.) GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE(((1.,1.,1.,1.,1.),(0.781002645201,0.781002645201,0.781002645201,0.781002645201,0.781002645201),(1.,1.,1.,1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#8544=CARTESIAN_POINT('',(6.991647199696,-6.513610152676,1.5));+#8545=CARTESIAN_POINT('',(6.903378641998,-6.601878710374,1.5));+#8546=CARTESIAN_POINT('',(6.752628676186,-6.752628676186,1.5));+#8547=CARTESIAN_POINT('',(6.601878710374,-6.903378641998,1.5));+#8548=CARTESIAN_POINT('',(6.513610152676,-6.991647199696,1.5));+#8549=ADVANCED_FACE('',(#8550),#8563,.T.);+#8550=FACE_BOUND('',#8551,.T.);+#8551=EDGE_LOOP('',(#8552,#8553,#8554,#8555));+#8552=ORIENTED_EDGE('',*,*,#8532,.T.);+#8553=ORIENTED_EDGE('',*,*,#1974,.T.);+#8554=ORIENTED_EDGE('',*,*,#8492,.F.);+#8555=ORIENTED_EDGE('',*,*,#8556,.F.);+#8556=EDGE_CURVE('',#7303,#8493,#8557,.T.);+#8557=B_SPLINE_CURVE_WITH_KNOTS('',2,(#8558,#8559,#8560,#8561,#8562),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.698356801641,-4.048920165973E-02,13.477327436574,14.135195036556),.UNSPECIFIED.);+#8558=CARTESIAN_POINT('',(7.416775919098,-6.795256413291,1.460395584541));+#8559=CARTESIAN_POINT('',(7.087842119108,-6.795256413291,1.460395584541));+#8560=CARTESIAN_POINT('',(-2.798288665974E-15,-6.795256413291,1.460395584541));+#8561=CARTESIAN_POINT('',(-7.087842119108,-6.795256413291,1.460395584541));+#8562=CARTESIAN_POINT('',(-7.416775919098,-6.795256413291,1.460395584541));+#8563=( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,2,((#8558,#8559,#8560,#8561,#8562),(#8564,#8565,#8566,#8567,#8568),(#1978,#1979,#1980,#1981,#1982)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,1,1,3),(0.,13.517816638234),(-0.698356801641,-4.048920165973E-02,13.477327436574,14.135195036556),.UNSPECIFIED.) GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE(((1.,1.,1.,1.,1.),(0.777145961457,0.777145961457,0.777145961457,0.777145961457,0.777145961457),(1.,1.,1.,1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#8564=CARTESIAN_POINT('',(7.416775919098,-6.786838234914,1.5));+#8565=CARTESIAN_POINT('',(7.087842119108,-6.786838234914,1.5));+#8566=CARTESIAN_POINT('',(-3.893816704882E-16,-6.786838234914,1.5));+#8567=CARTESIAN_POINT('',(-7.087842119108,-6.786838234914,1.5));+#8568=CARTESIAN_POINT('',(-7.416775919098,-6.786838234914,1.5));+#8569=ADVANCED_FACE('',(#8570),#8573,.F.);+#8570=FACE_BOUND('',#8571,.T.);+#8571=EDGE_LOOP('',(#8572));+#8572=ORIENTED_EDGE('',*,*,#2005,.F.);+#8573=PLANE('',#8574);+#8574=AXIS2_PLACEMENT_3D('',#2010,#464,#1569);+#8575=ADVANCED_FACE('',(#8576),#8592,.F.);+#8576=FACE_BOUND('',#8577,.F.);+#8577=EDGE_LOOP('',(#8578,#8585,#8588,#8589));+#8578=ORIENTED_EDGE('',*,*,#8579,.T.);+#8579=EDGE_CURVE('',#8580,#8582,#8584,.T.);+#8580=VERTEX_POINT('',#8581);+#8581=CARTESIAN_POINT('',(-6.861838234914,6.755919117457,0.1));+#8582=VERTEX_POINT('',#8583);+#8583=CARTESIAN_POINT('',(-6.755919117457,6.861838234914,0.1));+#8584=LINE('',#8581,#396);+#8585=ORIENTED_EDGE('',*,*,#8586,.T.);+#8586=EDGE_CURVE('',#8582,#2022,#8587,.T.);+#8587=B_SPLINE_CURVE_WITH_KNOTS('',1,(#8583,#2023),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8588=ORIENTED_EDGE('',*,*,#2019,.F.);+#8589=ORIENTED_EDGE('',*,*,#8590,.F.);+#8590=EDGE_CURVE('',#8580,#2020,#8591,.T.);+#8591=B_SPLINE_CURVE_WITH_KNOTS('',1,(#8581,#2021),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8592=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#8581,#2021),(#8583,#2023)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8593=ADVANCED_FACE('',(#8594),#8663,.T.);+#8594=FACE_BOUND('',#8595,.T.);+#8595=EDGE_LOOP('',(#2037,#8596,#8604,#8613,#8620,#8629,#8634,#8639,#8644,#8651,#8658,#2068));+#8596=ORIENTED_EDGE('',*,*,#8597,.T.);+#8597=EDGE_CURVE('',#2039,#8598,#8600,.T.);+#8598=VERTEX_POINT('',#8599);+#8599=CARTESIAN_POINT('',(-7.2,6.29,0.75));+#8600=LINE('',#8601,#8602);+#8601=CARTESIAN_POINT('',(-6.85,6.29,0.75));+#8602=VECTOR('',#8603,1.);+#8603=DIRECTION('',(-1.,1.144237745222E-17,0.));+#8604=ORIENTED_EDGE('',*,*,#8605,.T.);+#8605=EDGE_CURVE('',#8598,#8606,#8608,.T.);+#8606=VERTEX_POINT('',#8607);+#8607=CARTESIAN_POINT('',(-7.298480775301,6.29,0.667364817767));+#8608=CIRCLE('',#8609,0.1);+#8609=AXIS2_PLACEMENT_3D('',#8610,#8611,#8612);+#8610=CARTESIAN_POINT('',(-7.2,6.29,0.65));+#8611=DIRECTION('',(-1.144237745222E-17,-1.,0.));+#8612=DIRECTION('',(8.881784197001E-15,-1.016287272312E-31,1.));+#8613=ORIENTED_EDGE('',*,*,#8614,.T.);+#8614=EDGE_CURVE('',#8606,#8615,#8617,.T.);+#8615=VERTEX_POINT('',#8616);+#8616=CARTESIAN_POINT('',(-7.382385590716,6.29,0.165270364467));+#8617=LINE('',#8607,#8618);+#8618=VECTOR('',#8619,1.);+#8619=DIRECTION('',(-0.16482406317,1.885979144002E-18,-0.986322983713));+#8620=ORIENTED_EDGE('',*,*,#8621,.T.);+#8621=EDGE_CURVE('',#8615,#8622,#8624,.T.);+#8622=VERTEX_POINT('',#8623);+#8623=CARTESIAN_POINT('',(-7.579347141319,6.29,1.387778780781E-16));+#8624=CIRCLE('',#8625,0.2);+#8625=AXIS2_PLACEMENT_3D('',#8626,#8627,#8628);+#8626=CARTESIAN_POINT('',(-7.579347141319,6.29,0.2));+#8627=DIRECTION('',(1.144237745222E-17,1.,-2.311115933265E-33));+#8628=DIRECTION('',(0.984807753012,-1.126854202784E-17,-0.173648177667));+#8629=ORIENTED_EDGE('',*,*,#8630,.T.);+#8630=EDGE_CURVE('',#8622,#8631,#8633,.T.);+#8631=VERTEX_POINT('',#8632);+#8632=CARTESIAN_POINT('',(-8.,6.29,1.387778780781E-16));+#8633=LINE('',#8623,#8602);+#8634=ORIENTED_EDGE('',*,*,#8635,.T.);+#8635=EDGE_CURVE('',#8631,#8636,#8638,.T.);+#8636=VERTEX_POINT('',#8637);+#8637=CARTESIAN_POINT('',(-8.,6.29,0.1));+#8638=LINE('',#8632,#2043);+#8639=ORIENTED_EDGE('',*,*,#8640,.T.);+#8640=EDGE_CURVE('',#8636,#8641,#8643,.T.);+#8641=VERTEX_POINT('',#8642);+#8642=CARTESIAN_POINT('',(-7.579347141319,6.29,0.1));+#8643=LINE('',#8637,#429);+#8644=ORIENTED_EDGE('',*,*,#8645,.T.);+#8645=EDGE_CURVE('',#8641,#8646,#8648,.T.);+#8646=VERTEX_POINT('',#8647);+#8647=CARTESIAN_POINT('',(-7.480866366018,6.29,0.182635182233));+#8648=CIRCLE('',#8649,1.E-01);+#8649=AXIS2_PLACEMENT_3D('',#8626,#8611,#8650);+#8650=DIRECTION('',(-8.881784197001E-15,1.016287272312E-31,-1.));+#8651=ORIENTED_EDGE('',*,*,#8652,.T.);+#8652=EDGE_CURVE('',#8646,#8653,#8655,.T.);+#8653=VERTEX_POINT('',#8654);+#8654=CARTESIAN_POINT('',(-7.396961550602,6.29,0.684729635533));+#8655=LINE('',#8647,#8656);+#8656=VECTOR('',#8657,1.);+#8657=DIRECTION('',(0.16482406317,-1.885979144002E-18,0.986322983713));+#8658=ORIENTED_EDGE('',*,*,#8659,.T.);+#8659=EDGE_CURVE('',#8653,#2064,#8660,.T.);+#8660=CIRCLE('',#8661,0.2);+#8661=AXIS2_PLACEMENT_3D('',#8610,#2067,#8662);+#8662=DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667));+#8663=PLANE('',#8664);+#8664=AXIS2_PLACEMENT_3D('',#8665,#2067,#13);+#8665=CARTESIAN_POINT('',(-7.414276639233,6.29,0.410238158856));+#8666=ADVANCED_FACE('',(#8667),#8934,.F.);+#8667=FACE_BOUND('',#8668,.F.);+#8668=EDGE_LOOP('',(#8669,#8674,#8675,#8676,#8680,#8684,#8688,#8692,#8696,#8700,#8704,#8708,#8712,#8716,#8720,#8724,#8728,#8732,#8736,#8740,#8744,#8748,#8752,#8756,#8760,#8764,#8768,#8772,#8776,#8780,#8784,#8788,#8792,#8796,#8800,#8804,#8808,#8812,#8816,#8820,#8824,#8828,#8832,#8836,#8840,#8844,#8848,#8852,#8856,#8860,#8864,#8868,#8872,#8876,#8880,#8884,#8888,#8892,#8896,#8900,#8904,#8908,#8912,#8916,#8920,#8924,#8928,#8931));+#8669=ORIENTED_EDGE('',*,*,#8670,.T.);+#8670=EDGE_CURVE('',#8671,#8580,#8673,.T.);+#8671=VERTEX_POINT('',#8672);+#8672=CARTESIAN_POINT('',(-6.861838234914,-6.755919117457,0.1));+#8673=LINE('',#8672,#421);+#8674=ORIENTED_EDGE('',*,*,#8590,.T.);+#8675=ORIENTED_EDGE('',*,*,#2045,.F.);+#8676=ORIENTED_EDGE('',*,*,#8677,.F.);+#8677=EDGE_CURVE('',#8678,#2039,#2046,.T.);+#8678=VERTEX_POINT('',#8679);+#8679=CARTESIAN_POINT('',(-7.,6.11,0.75));+#8680=ORIENTED_EDGE('',*,*,#8681,.F.);+#8681=EDGE_CURVE('',#8682,#8678,#2046,.T.);+#8682=VERTEX_POINT('',#8683);+#8683=CARTESIAN_POINT('',(-7.,5.89,0.75));+#8684=ORIENTED_EDGE('',*,*,#8685,.F.);+#8685=EDGE_CURVE('',#8686,#8682,#2046,.T.);+#8686=VERTEX_POINT('',#8687);+#8687=CARTESIAN_POINT('',(-7.,5.71,0.75));+#8688=ORIENTED_EDGE('',*,*,#8689,.F.);+#8689=EDGE_CURVE('',#8690,#8686,#2046,.T.);+#8690=VERTEX_POINT('',#8691);+#8691=CARTESIAN_POINT('',(-7.,5.49,0.75));+#8692=ORIENTED_EDGE('',*,*,#8693,.F.);+#8693=EDGE_CURVE('',#8694,#8690,#2046,.T.);+#8694=VERTEX_POINT('',#8695);+#8695=CARTESIAN_POINT('',(-7.,5.31,0.75));+#8696=ORIENTED_EDGE('',*,*,#8697,.F.);+#8697=EDGE_CURVE('',#8698,#8694,#2046,.T.);+#8698=VERTEX_POINT('',#8699);+#8699=CARTESIAN_POINT('',(-7.,5.09,0.75));+#8700=ORIENTED_EDGE('',*,*,#8701,.F.);+#8701=EDGE_CURVE('',#8702,#8698,#2046,.T.);+#8702=VERTEX_POINT('',#8703);+#8703=CARTESIAN_POINT('',(-7.,4.91,0.75));+#8704=ORIENTED_EDGE('',*,*,#8705,.F.);+#8705=EDGE_CURVE('',#8706,#8702,#2046,.T.);+#8706=VERTEX_POINT('',#8707);+#8707=CARTESIAN_POINT('',(-7.,4.69,0.75));+#8708=ORIENTED_EDGE('',*,*,#8709,.F.);+#8709=EDGE_CURVE('',#8710,#8706,#2046,.T.);+#8710=VERTEX_POINT('',#8711);+#8711=CARTESIAN_POINT('',(-7.,4.51,0.75));+#8712=ORIENTED_EDGE('',*,*,#8713,.F.);+#8713=EDGE_CURVE('',#8714,#8710,#2046,.T.);+#8714=VERTEX_POINT('',#8715);+#8715=CARTESIAN_POINT('',(-7.,4.29,0.75));+#8716=ORIENTED_EDGE('',*,*,#8717,.F.);+#8717=EDGE_CURVE('',#8718,#8714,#2046,.T.);+#8718=VERTEX_POINT('',#8719);+#8719=CARTESIAN_POINT('',(-7.,4.11,0.75));+#8720=ORIENTED_EDGE('',*,*,#8721,.F.);+#8721=EDGE_CURVE('',#8722,#8718,#2046,.T.);+#8722=VERTEX_POINT('',#8723);+#8723=CARTESIAN_POINT('',(-7.,3.89,0.75));+#8724=ORIENTED_EDGE('',*,*,#8725,.F.);+#8725=EDGE_CURVE('',#8726,#8722,#2046,.T.);+#8726=VERTEX_POINT('',#8727);+#8727=CARTESIAN_POINT('',(-7.,3.71,0.75));+#8728=ORIENTED_EDGE('',*,*,#8729,.F.);+#8729=EDGE_CURVE('',#8730,#8726,#2046,.T.);+#8730=VERTEX_POINT('',#8731);+#8731=CARTESIAN_POINT('',(-7.,3.49,0.75));+#8732=ORIENTED_EDGE('',*,*,#8733,.F.);+#8733=EDGE_CURVE('',#8734,#8730,#2046,.T.);+#8734=VERTEX_POINT('',#8735);+#8735=CARTESIAN_POINT('',(-7.,3.31,0.75));+#8736=ORIENTED_EDGE('',*,*,#8737,.F.);+#8737=EDGE_CURVE('',#8738,#8734,#2046,.T.);+#8738=VERTEX_POINT('',#8739);+#8739=CARTESIAN_POINT('',(-7.,3.09,0.75));+#8740=ORIENTED_EDGE('',*,*,#8741,.F.);+#8741=EDGE_CURVE('',#8742,#8738,#2046,.T.);+#8742=VERTEX_POINT('',#8743);+#8743=CARTESIAN_POINT('',(-7.,2.91,0.75));+#8744=ORIENTED_EDGE('',*,*,#8745,.F.);+#8745=EDGE_CURVE('',#8746,#8742,#2046,.T.);+#8746=VERTEX_POINT('',#8747);+#8747=CARTESIAN_POINT('',(-7.,2.69,0.75));+#8748=ORIENTED_EDGE('',*,*,#8749,.F.);+#8749=EDGE_CURVE('',#8750,#8746,#2046,.T.);+#8750=VERTEX_POINT('',#8751);+#8751=CARTESIAN_POINT('',(-7.,2.51,0.75));+#8752=ORIENTED_EDGE('',*,*,#8753,.F.);+#8753=EDGE_CURVE('',#8754,#8750,#2046,.T.);+#8754=VERTEX_POINT('',#8755);+#8755=CARTESIAN_POINT('',(-7.,2.29,0.75));+#8756=ORIENTED_EDGE('',*,*,#8757,.F.);+#8757=EDGE_CURVE('',#8758,#8754,#2046,.T.);+#8758=VERTEX_POINT('',#8759);+#8759=CARTESIAN_POINT('',(-7.,2.11,0.75));+#8760=ORIENTED_EDGE('',*,*,#8761,.F.);+#8761=EDGE_CURVE('',#8762,#8758,#2046,.T.);+#8762=VERTEX_POINT('',#8763);+#8763=CARTESIAN_POINT('',(-7.,1.89,0.75));+#8764=ORIENTED_EDGE('',*,*,#8765,.F.);+#8765=EDGE_CURVE('',#8766,#8762,#2046,.T.);+#8766=VERTEX_POINT('',#8767);+#8767=CARTESIAN_POINT('',(-7.,1.71,0.75));+#8768=ORIENTED_EDGE('',*,*,#8769,.F.);+#8769=EDGE_CURVE('',#8770,#8766,#2046,.T.);+#8770=VERTEX_POINT('',#8771);+#8771=CARTESIAN_POINT('',(-7.,1.49,0.75));+#8772=ORIENTED_EDGE('',*,*,#8773,.F.);+#8773=EDGE_CURVE('',#8774,#8770,#2046,.T.);+#8774=VERTEX_POINT('',#8775);+#8775=CARTESIAN_POINT('',(-7.,1.31,0.75));+#8776=ORIENTED_EDGE('',*,*,#8777,.F.);+#8777=EDGE_CURVE('',#8778,#8774,#2046,.T.);+#8778=VERTEX_POINT('',#8779);+#8779=CARTESIAN_POINT('',(-7.,1.09,0.75));+#8780=ORIENTED_EDGE('',*,*,#8781,.F.);+#8781=EDGE_CURVE('',#8782,#8778,#2046,.T.);+#8782=VERTEX_POINT('',#8783);+#8783=CARTESIAN_POINT('',(-7.,0.91,0.75));+#8784=ORIENTED_EDGE('',*,*,#8785,.F.);+#8785=EDGE_CURVE('',#8786,#8782,#2046,.T.);+#8786=VERTEX_POINT('',#8787);+#8787=CARTESIAN_POINT('',(-7.,0.69,0.75));+#8788=ORIENTED_EDGE('',*,*,#8789,.F.);+#8789=EDGE_CURVE('',#8790,#8786,#2046,.T.);+#8790=VERTEX_POINT('',#8791);+#8791=CARTESIAN_POINT('',(-7.,0.51,0.75));+#8792=ORIENTED_EDGE('',*,*,#8793,.F.);+#8793=EDGE_CURVE('',#8794,#8790,#2046,.T.);+#8794=VERTEX_POINT('',#8795);+#8795=CARTESIAN_POINT('',(-7.,0.29,0.75));+#8796=ORIENTED_EDGE('',*,*,#8797,.F.);+#8797=EDGE_CURVE('',#8798,#8794,#2046,.T.);+#8798=VERTEX_POINT('',#8799);+#8799=CARTESIAN_POINT('',(-7.,0.11,0.75));+#8800=ORIENTED_EDGE('',*,*,#8801,.F.);+#8801=EDGE_CURVE('',#8802,#8798,#2046,.T.);+#8802=VERTEX_POINT('',#8803);+#8803=CARTESIAN_POINT('',(-7.,-0.11,0.75));+#8804=ORIENTED_EDGE('',*,*,#8805,.F.);+#8805=EDGE_CURVE('',#8806,#8802,#2046,.T.);+#8806=VERTEX_POINT('',#8807);+#8807=CARTESIAN_POINT('',(-7.,-0.29,0.75));+#8808=ORIENTED_EDGE('',*,*,#8809,.F.);+#8809=EDGE_CURVE('',#8810,#8806,#2046,.T.);+#8810=VERTEX_POINT('',#8811);+#8811=CARTESIAN_POINT('',(-7.,-0.51,0.75));+#8812=ORIENTED_EDGE('',*,*,#8813,.F.);+#8813=EDGE_CURVE('',#8814,#8810,#2046,.T.);+#8814=VERTEX_POINT('',#8815);+#8815=CARTESIAN_POINT('',(-7.,-0.69,0.75));+#8816=ORIENTED_EDGE('',*,*,#8817,.F.);+#8817=EDGE_CURVE('',#8818,#8814,#2046,.T.);+#8818=VERTEX_POINT('',#8819);+#8819=CARTESIAN_POINT('',(-7.,-0.91,0.75));+#8820=ORIENTED_EDGE('',*,*,#8821,.F.);+#8821=EDGE_CURVE('',#8822,#8818,#2046,.T.);+#8822=VERTEX_POINT('',#8823);+#8823=CARTESIAN_POINT('',(-7.,-1.09,0.75));+#8824=ORIENTED_EDGE('',*,*,#8825,.F.);+#8825=EDGE_CURVE('',#8826,#8822,#2046,.T.);+#8826=VERTEX_POINT('',#8827);+#8827=CARTESIAN_POINT('',(-7.,-1.31,0.75));+#8828=ORIENTED_EDGE('',*,*,#8829,.F.);+#8829=EDGE_CURVE('',#8830,#8826,#2046,.T.);+#8830=VERTEX_POINT('',#8831);+#8831=CARTESIAN_POINT('',(-7.,-1.49,0.75));+#8832=ORIENTED_EDGE('',*,*,#8833,.F.);+#8833=EDGE_CURVE('',#8834,#8830,#2046,.T.);+#8834=VERTEX_POINT('',#8835);+#8835=CARTESIAN_POINT('',(-7.,-1.71,0.75));+#8836=ORIENTED_EDGE('',*,*,#8837,.F.);+#8837=EDGE_CURVE('',#8838,#8834,#2046,.T.);+#8838=VERTEX_POINT('',#8839);+#8839=CARTESIAN_POINT('',(-7.,-1.89,0.75));+#8840=ORIENTED_EDGE('',*,*,#8841,.F.);+#8841=EDGE_CURVE('',#8842,#8838,#2046,.T.);+#8842=VERTEX_POINT('',#8843);+#8843=CARTESIAN_POINT('',(-7.,-2.11,0.75));+#8844=ORIENTED_EDGE('',*,*,#8845,.F.);+#8845=EDGE_CURVE('',#8846,#8842,#2046,.T.);+#8846=VERTEX_POINT('',#8847);+#8847=CARTESIAN_POINT('',(-7.,-2.29,0.75));+#8848=ORIENTED_EDGE('',*,*,#8849,.F.);+#8849=EDGE_CURVE('',#8850,#8846,#2046,.T.);+#8850=VERTEX_POINT('',#8851);+#8851=CARTESIAN_POINT('',(-7.,-2.51,0.75));+#8852=ORIENTED_EDGE('',*,*,#8853,.F.);+#8853=EDGE_CURVE('',#8854,#8850,#2046,.T.);+#8854=VERTEX_POINT('',#8855);+#8855=CARTESIAN_POINT('',(-7.,-2.69,0.75));+#8856=ORIENTED_EDGE('',*,*,#8857,.F.);+#8857=EDGE_CURVE('',#8858,#8854,#2046,.T.);+#8858=VERTEX_POINT('',#8859);+#8859=CARTESIAN_POINT('',(-7.,-2.91,0.75));+#8860=ORIENTED_EDGE('',*,*,#8861,.F.);+#8861=EDGE_CURVE('',#8862,#8858,#2046,.T.);+#8862=VERTEX_POINT('',#8863);+#8863=CARTESIAN_POINT('',(-7.,-3.09,0.75));+#8864=ORIENTED_EDGE('',*,*,#8865,.F.);+#8865=EDGE_CURVE('',#8866,#8862,#2046,.T.);+#8866=VERTEX_POINT('',#8867);+#8867=CARTESIAN_POINT('',(-7.,-3.31,0.75));+#8868=ORIENTED_EDGE('',*,*,#8869,.F.);+#8869=EDGE_CURVE('',#8870,#8866,#2046,.T.);+#8870=VERTEX_POINT('',#8871);+#8871=CARTESIAN_POINT('',(-7.,-3.49,0.75));+#8872=ORIENTED_EDGE('',*,*,#8873,.F.);+#8873=EDGE_CURVE('',#8874,#8870,#2046,.T.);+#8874=VERTEX_POINT('',#8875);+#8875=CARTESIAN_POINT('',(-7.,-3.71,0.75));+#8876=ORIENTED_EDGE('',*,*,#8877,.F.);+#8877=EDGE_CURVE('',#8878,#8874,#2046,.T.);+#8878=VERTEX_POINT('',#8879);+#8879=CARTESIAN_POINT('',(-7.,-3.89,0.75));+#8880=ORIENTED_EDGE('',*,*,#8881,.F.);+#8881=EDGE_CURVE('',#8882,#8878,#2046,.T.);+#8882=VERTEX_POINT('',#8883);+#8883=CARTESIAN_POINT('',(-7.,-4.11,0.75));+#8884=ORIENTED_EDGE('',*,*,#8885,.F.);+#8885=EDGE_CURVE('',#8886,#8882,#2046,.T.);+#8886=VERTEX_POINT('',#8887);+#8887=CARTESIAN_POINT('',(-7.,-4.29,0.75));+#8888=ORIENTED_EDGE('',*,*,#8889,.F.);+#8889=EDGE_CURVE('',#8890,#8886,#2046,.T.);+#8890=VERTEX_POINT('',#8891);+#8891=CARTESIAN_POINT('',(-7.,-4.51,0.75));+#8892=ORIENTED_EDGE('',*,*,#8893,.F.);+#8893=EDGE_CURVE('',#8894,#8890,#2046,.T.);+#8894=VERTEX_POINT('',#8895);+#8895=CARTESIAN_POINT('',(-7.,-4.69,0.75));+#8896=ORIENTED_EDGE('',*,*,#8897,.F.);+#8897=EDGE_CURVE('',#8898,#8894,#2046,.T.);+#8898=VERTEX_POINT('',#8899);+#8899=CARTESIAN_POINT('',(-7.,-4.91,0.75));+#8900=ORIENTED_EDGE('',*,*,#8901,.F.);+#8901=EDGE_CURVE('',#8902,#8898,#2046,.T.);+#8902=VERTEX_POINT('',#8903);+#8903=CARTESIAN_POINT('',(-7.,-5.09,0.75));+#8904=ORIENTED_EDGE('',*,*,#8905,.F.);+#8905=EDGE_CURVE('',#8906,#8902,#2046,.T.);+#8906=VERTEX_POINT('',#8907);+#8907=CARTESIAN_POINT('',(-7.,-5.31,0.75));+#8908=ORIENTED_EDGE('',*,*,#8909,.F.);+#8909=EDGE_CURVE('',#8910,#8906,#2046,.T.);+#8910=VERTEX_POINT('',#8911);+#8911=CARTESIAN_POINT('',(-7.,-5.49,0.75));+#8912=ORIENTED_EDGE('',*,*,#8913,.F.);+#8913=EDGE_CURVE('',#8914,#8910,#2046,.T.);+#8914=VERTEX_POINT('',#8915);+#8915=CARTESIAN_POINT('',(-7.,-5.71,0.75));+#8916=ORIENTED_EDGE('',*,*,#8917,.F.);+#8917=EDGE_CURVE('',#8918,#8914,#2046,.T.);+#8918=VERTEX_POINT('',#8919);+#8919=CARTESIAN_POINT('',(-7.,-5.89,0.75));+#8920=ORIENTED_EDGE('',*,*,#8921,.F.);+#8921=EDGE_CURVE('',#8922,#8918,#2046,.T.);+#8922=VERTEX_POINT('',#8923);+#8923=CARTESIAN_POINT('',(-7.,-6.11,0.75));+#8924=ORIENTED_EDGE('',*,*,#8925,.F.);+#8925=EDGE_CURVE('',#8926,#8922,#2046,.T.);+#8926=VERTEX_POINT('',#8927);+#8927=CARTESIAN_POINT('',(-7.,-6.29,0.75));+#8928=ORIENTED_EDGE('',*,*,#8929,.F.);+#8929=EDGE_CURVE('',#8930,#8926,#2046,.T.);+#8930=VERTEX_POINT('',#2047);+#8931=ORIENTED_EDGE('',*,*,#8932,.F.);+#8932=EDGE_CURVE('',#8671,#8930,#8933,.T.);+#8933=B_SPLINE_CURVE_WITH_KNOTS('',1,(#8672,#2047),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8934=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#8672,#2047),(#8581,#2021)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,13.65),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8935=ADVANCED_FACE('',(#8936),#8998,.F.);+#8936=FACE_BOUND('',#8937,.F.);+#8937=EDGE_LOOP('',(#8938,#8942,#8948,#8955,#8960,#8967,#8972,#8977,#8982,#8988,#8993,#8997));+#8938=ORIENTED_EDGE('',*,*,#8939,.F.);+#8939=EDGE_CURVE('',#8678,#2059,#8940,.T.);+#8940=LINE('',#8941,#2043);+#8941=CARTESIAN_POINT('',(-7.,6.11,0.630119079428));+#8942=ORIENTED_EDGE('',*,*,#8943,.T.);+#8943=EDGE_CURVE('',#8678,#8944,#8946,.T.);+#8944=VERTEX_POINT('',#8945);+#8945=CARTESIAN_POINT('',(-7.2,6.11,0.75));+#8946=LINE('',#8947,#8602);+#8947=CARTESIAN_POINT('',(-6.85,6.11,0.75));+#8948=ORIENTED_EDGE('',*,*,#8949,.T.);+#8949=EDGE_CURVE('',#8944,#8950,#8952,.T.);+#8950=VERTEX_POINT('',#8951);+#8951=CARTESIAN_POINT('',(-7.298480775301,6.11,0.667364817767));+#8952=CIRCLE('',#8953,0.1);+#8953=AXIS2_PLACEMENT_3D('',#8954,#8611,#8612);+#8954=CARTESIAN_POINT('',(-7.2,6.11,0.65));+#8955=ORIENTED_EDGE('',*,*,#8956,.T.);+#8956=EDGE_CURVE('',#8950,#8957,#8959,.T.);+#8957=VERTEX_POINT('',#8958);+#8958=CARTESIAN_POINT('',(-7.382385590716,6.11,0.165270364467));+#8959=LINE('',#8951,#8618);+#8960=ORIENTED_EDGE('',*,*,#8961,.T.);+#8961=EDGE_CURVE('',#8957,#8962,#8964,.T.);+#8962=VERTEX_POINT('',#8963);+#8963=CARTESIAN_POINT('',(-7.579347141319,6.11,1.387778780781E-16));+#8964=CIRCLE('',#8965,0.2);+#8965=AXIS2_PLACEMENT_3D('',#8966,#8627,#8628);+#8966=CARTESIAN_POINT('',(-7.579347141319,6.11,0.2));+#8967=ORIENTED_EDGE('',*,*,#8968,.T.);+#8968=EDGE_CURVE('',#8962,#8969,#8971,.T.);+#8969=VERTEX_POINT('',#8970);+#8970=CARTESIAN_POINT('',(-8.,6.11,1.387778780781E-16));+#8971=LINE('',#8963,#8602);+#8972=ORIENTED_EDGE('',*,*,#8973,.T.);+#8973=EDGE_CURVE('',#8969,#8974,#8976,.T.);+#8974=VERTEX_POINT('',#8975);+#8975=CARTESIAN_POINT('',(-8.,6.11,0.1));+#8976=LINE('',#8970,#2043);+#8977=ORIENTED_EDGE('',*,*,#8978,.T.);+#8978=EDGE_CURVE('',#8974,#8979,#8981,.T.);+#8979=VERTEX_POINT('',#8980);+#8980=CARTESIAN_POINT('',(-7.579347141319,6.11,0.1));+#8981=LINE('',#8975,#429);+#8982=ORIENTED_EDGE('',*,*,#8983,.T.);+#8983=EDGE_CURVE('',#8979,#8984,#8986,.T.);+#8984=VERTEX_POINT('',#8985);+#8985=CARTESIAN_POINT('',(-7.480866366018,6.11,0.182635182233));+#8986=CIRCLE('',#8987,1.E-01);+#8987=AXIS2_PLACEMENT_3D('',#8966,#8611,#8650);+#8988=ORIENTED_EDGE('',*,*,#8989,.T.);+#8989=EDGE_CURVE('',#8984,#8990,#8992,.T.);+#8990=VERTEX_POINT('',#8991);+#8991=CARTESIAN_POINT('',(-7.396961550602,6.11,0.684729635533));+#8992=LINE('',#8985,#8656);+#8993=ORIENTED_EDGE('',*,*,#8994,.T.);+#8994=EDGE_CURVE('',#8990,#2057,#8995,.T.);+#8995=CIRCLE('',#8996,0.2);+#8996=AXIS2_PLACEMENT_3D('',#8954,#2067,#8662);+#8997=ORIENTED_EDGE('',*,*,#2056,.T.);+#8998=PLANE('',#8999);+#8999=AXIS2_PLACEMENT_3D('',#9000,#2067,#13);+#9000=CARTESIAN_POINT('',(-7.414276639233,6.11,0.410238158856));+#9001=ADVANCED_FACE('',(#9002),#435,.F.);+#9002=FACE_BOUND('',#9003,.F.);+#9003=EDGE_LOOP('',(#9004,#9008,#9009,#9010));+#9004=ORIENTED_EDGE('',*,*,#9005,.T.);+#9005=EDGE_CURVE('',#9006,#2059,#433,.T.);+#9006=VERTEX_POINT('',#9007);+#9007=CARTESIAN_POINT('',(-7.,5.89,0.85));+#9008=ORIENTED_EDGE('',*,*,#2076,.T.);+#9009=ORIENTED_EDGE('',*,*,#2347,.F.);+#9010=ORIENTED_EDGE('',*,*,#9011,.F.);+#9011=EDGE_CURVE('',#9006,#2344,#9012,.T.);+#9012=LINE('',#9013,#429);+#9013=CARTESIAN_POINT('',(-7.2,5.89,0.85));+#9014=ADVANCED_FACE('',(#9015),#9022,.T.);+#9015=FACE_BOUND('',#9016,.F.);+#9016=EDGE_LOOP('',(#9017,#8658,#9020,#9021));+#9017=ORIENTED_EDGE('',*,*,#9018,.T.);+#9018=EDGE_CURVE('',#8990,#8653,#9019,.T.);+#9019=LINE('',#8991,#2066);+#9020=ORIENTED_EDGE('',*,*,#2063,.F.);+#9021=ORIENTED_EDGE('',*,*,#8994,.F.);+#9022=CYLINDRICAL_SURFACE('',#9023,0.2);+#9023=AXIS2_PLACEMENT_3D('',#8954,#8611,#8662);+#9024=ADVANCED_FACE('',(#9025),#435,.F.);+#9025=FACE_BOUND('',#9026,.F.);+#9026=EDGE_LOOP('',(#9027,#9032,#9036,#9037,#9044,#9048,#9054,#9058));+#9027=ORIENTED_EDGE('',*,*,#9028,.T.);+#9028=EDGE_CURVE('',#9029,#9030,#433,.T.);+#9029=VERTEX_POINT('',#434);+#9030=VERTEX_POINT('',#9031);+#9031=CARTESIAN_POINT('',(-7.,-6.29,0.85));+#9032=ORIENTED_EDGE('',*,*,#9033,.T.);+#9033=EDGE_CURVE('',#9030,#2100,#9034,.T.);+#9034=LINE('',#9035,#429);+#9035=CARTESIAN_POINT('',(-7.2,-6.29,0.85));+#9036=ORIENTED_EDGE('',*,*,#2099,.F.);+#9037=ORIENTED_EDGE('',*,*,#9038,.F.);+#9038=EDGE_CURVE('',#9039,#2095,#9041,.T.);+#9039=VERTEX_POINT('',#9040);+#9040=CARTESIAN_POINT('',(-6.7875,-6.925,0.85));+#9041=LINE('',#9040,#9042);+#9042=VECTOR('',#9043,1.);+#9043=DIRECTION('',(-0.707106781187,0.707106781187,0.));+#9044=ORIENTED_EDGE('',*,*,#9045,.F.);+#9045=EDGE_CURVE('',#9046,#9039,#8462,.T.);+#9046=VERTEX_POINT('',#9047);+#9047=CARTESIAN_POINT('',(-6.29,-6.925,0.85));+#9048=ORIENTED_EDGE('',*,*,#9049,.F.);+#9049=EDGE_CURVE('',#9050,#9046,#9052,.T.);+#9050=VERTEX_POINT('',#9051);+#9051=CARTESIAN_POINT('',(-6.29,-7.,0.85));+#9052=LINE('',#9053,#8458);+#9053=CARTESIAN_POINT('',(-6.29,-7.2,0.85));+#9054=ORIENTED_EDGE('',*,*,#9055,.T.);+#9055=EDGE_CURVE('',#9050,#9056,#8451,.T.);+#9056=VERTEX_POINT('',#9057);+#9057=CARTESIAN_POINT('',(-6.825,-7.,0.85));+#9058=ORIENTED_EDGE('',*,*,#9059,.T.);+#9059=EDGE_CURVE('',#9056,#9029,#9060,.T.);+#9060=LINE('',#9057,#9042);+#9061=ADVANCED_FACE('',(#9062),#9081,.F.);+#9062=FACE_BOUND('',#9063,.F.);+#9063=EDGE_LOOP('',(#9064,#9067,#9072,#9077,#9079,#9080));+#9064=ORIENTED_EDGE('',*,*,#9065,.F.);+#9065=EDGE_CURVE('',#9066,#9030,#9034,.T.);+#9066=VERTEX_POINT('',#9035);+#9067=ORIENTED_EDGE('',*,*,#9068,.T.);+#9068=EDGE_CURVE('',#9066,#9069,#9071,.T.);+#9069=VERTEX_POINT('',#9070);+#9070=CARTESIAN_POINT('',(-7.2,-6.11,0.85));+#9071=LINE('',#9035,#2066);+#9072=ORIENTED_EDGE('',*,*,#9073,.T.);+#9073=EDGE_CURVE('',#9069,#9074,#9076,.T.);+#9074=VERTEX_POINT('',#9075);+#9075=CARTESIAN_POINT('',(-7.,-6.11,0.85));+#9076=LINE('',#9070,#429);+#9077=ORIENTED_EDGE('',*,*,#9078,.T.);+#9078=EDGE_CURVE('',#9074,#2104,#9076,.T.);+#9079=ORIENTED_EDGE('',*,*,#2103,.F.);+#9080=ORIENTED_EDGE('',*,*,#9033,.F.);+#9081=PLANE('',#9082);+#9082=AXIS2_PLACEMENT_3D('',#9035,#464,#430);+#9083=ADVANCED_FACE('',(#9084),#435,.F.);+#9084=FACE_BOUND('',#9085,.F.);+#9085=EDGE_LOOP('',(#9086,#9090,#9094,#9095));+#9086=ORIENTED_EDGE('',*,*,#9087,.T.);+#9087=EDGE_CURVE('',#9074,#9088,#433,.T.);+#9088=VERTEX_POINT('',#9089);+#9089=CARTESIAN_POINT('',(-7.,-5.89,0.85));+#9090=ORIENTED_EDGE('',*,*,#9091,.T.);+#9091=EDGE_CURVE('',#9088,#2108,#9092,.T.);+#9092=LINE('',#9093,#429);+#9093=CARTESIAN_POINT('',(-7.2,-5.89,0.85));+#9094=ORIENTED_EDGE('',*,*,#2107,.F.);+#9095=ORIENTED_EDGE('',*,*,#9078,.F.);+#9096=ADVANCED_FACE('',(#9097),#9116,.F.);+#9097=FACE_BOUND('',#9098,.F.);+#9098=EDGE_LOOP('',(#9099,#9102,#9107,#9112,#9114,#9115));+#9099=ORIENTED_EDGE('',*,*,#9100,.F.);+#9100=EDGE_CURVE('',#9101,#9088,#9092,.T.);+#9101=VERTEX_POINT('',#9093);+#9102=ORIENTED_EDGE('',*,*,#9103,.T.);+#9103=EDGE_CURVE('',#9101,#9104,#9106,.T.);+#9104=VERTEX_POINT('',#9105);+#9105=CARTESIAN_POINT('',(-7.2,-5.71,0.85));+#9106=LINE('',#9093,#2066);+#9107=ORIENTED_EDGE('',*,*,#9108,.T.);+#9108=EDGE_CURVE('',#9104,#9109,#9111,.T.);+#9109=VERTEX_POINT('',#9110);+#9110=CARTESIAN_POINT('',(-7.,-5.71,0.85));+#9111=LINE('',#9105,#429);+#9112=ORIENTED_EDGE('',*,*,#9113,.T.);+#9113=EDGE_CURVE('',#9109,#2112,#9111,.T.);+#9114=ORIENTED_EDGE('',*,*,#2111,.F.);+#9115=ORIENTED_EDGE('',*,*,#9091,.F.);+#9116=PLANE('',#9117);+#9117=AXIS2_PLACEMENT_3D('',#9093,#464,#430);+#9118=ADVANCED_FACE('',(#9119),#435,.F.);+#9119=FACE_BOUND('',#9120,.F.);+#9120=EDGE_LOOP('',(#9121,#9125,#9129,#9130));+#9121=ORIENTED_EDGE('',*,*,#9122,.T.);+#9122=EDGE_CURVE('',#9109,#9123,#433,.T.);+#9123=VERTEX_POINT('',#9124);+#9124=CARTESIAN_POINT('',(-7.,-5.49,0.85));+#9125=ORIENTED_EDGE('',*,*,#9126,.T.);+#9126=EDGE_CURVE('',#9123,#2116,#9127,.T.);+#9127=LINE('',#9128,#429);+#9128=CARTESIAN_POINT('',(-7.2,-5.49,0.85));+#9129=ORIENTED_EDGE('',*,*,#2115,.F.);+#9130=ORIENTED_EDGE('',*,*,#9113,.F.);+#9131=ADVANCED_FACE('',(#9132),#9151,.F.);+#9132=FACE_BOUND('',#9133,.F.);+#9133=EDGE_LOOP('',(#9134,#9137,#9142,#9147,#9149,#9150));+#9134=ORIENTED_EDGE('',*,*,#9135,.F.);+#9135=EDGE_CURVE('',#9136,#9123,#9127,.T.);+#9136=VERTEX_POINT('',#9128);+#9137=ORIENTED_EDGE('',*,*,#9138,.T.);+#9138=EDGE_CURVE('',#9136,#9139,#9141,.T.);+#9139=VERTEX_POINT('',#9140);+#9140=CARTESIAN_POINT('',(-7.2,-5.31,0.85));+#9141=LINE('',#9128,#2066);+#9142=ORIENTED_EDGE('',*,*,#9143,.T.);+#9143=EDGE_CURVE('',#9139,#9144,#9146,.T.);+#9144=VERTEX_POINT('',#9145);+#9145=CARTESIAN_POINT('',(-7.,-5.31,0.85));+#9146=LINE('',#9140,#429);+#9147=ORIENTED_EDGE('',*,*,#9148,.T.);+#9148=EDGE_CURVE('',#9144,#2120,#9146,.T.);+#9149=ORIENTED_EDGE('',*,*,#2119,.F.);+#9150=ORIENTED_EDGE('',*,*,#9126,.F.);+#9151=PLANE('',#9152);+#9152=AXIS2_PLACEMENT_3D('',#9128,#464,#430);+#9153=ADVANCED_FACE('',(#9154),#435,.F.);+#9154=FACE_BOUND('',#9155,.F.);+#9155=EDGE_LOOP('',(#9156,#9160,#9164,#9165));+#9156=ORIENTED_EDGE('',*,*,#9157,.T.);+#9157=EDGE_CURVE('',#9144,#9158,#433,.T.);+#9158=VERTEX_POINT('',#9159);+#9159=CARTESIAN_POINT('',(-7.,-5.09,0.85));+#9160=ORIENTED_EDGE('',*,*,#9161,.T.);+#9161=EDGE_CURVE('',#9158,#2124,#9162,.T.);+#9162=LINE('',#9163,#429);+#9163=CARTESIAN_POINT('',(-7.2,-5.09,0.85));+#9164=ORIENTED_EDGE('',*,*,#2123,.F.);+#9165=ORIENTED_EDGE('',*,*,#9148,.F.);+#9166=ADVANCED_FACE('',(#9167),#9186,.F.);+#9167=FACE_BOUND('',#9168,.F.);+#9168=EDGE_LOOP('',(#9169,#9172,#9177,#9182,#9184,#9185));+#9169=ORIENTED_EDGE('',*,*,#9170,.F.);+#9170=EDGE_CURVE('',#9171,#9158,#9162,.T.);+#9171=VERTEX_POINT('',#9163);+#9172=ORIENTED_EDGE('',*,*,#9173,.T.);+#9173=EDGE_CURVE('',#9171,#9174,#9176,.T.);+#9174=VERTEX_POINT('',#9175);+#9175=CARTESIAN_POINT('',(-7.2,-4.91,0.85));+#9176=LINE('',#9163,#2066);+#9177=ORIENTED_EDGE('',*,*,#9178,.T.);+#9178=EDGE_CURVE('',#9174,#9179,#9181,.T.);+#9179=VERTEX_POINT('',#9180);+#9180=CARTESIAN_POINT('',(-7.,-4.91,0.85));+#9181=LINE('',#9175,#429);+#9182=ORIENTED_EDGE('',*,*,#9183,.T.);+#9183=EDGE_CURVE('',#9179,#2128,#9181,.T.);+#9184=ORIENTED_EDGE('',*,*,#2127,.F.);+#9185=ORIENTED_EDGE('',*,*,#9161,.F.);+#9186=PLANE('',#9187);+#9187=AXIS2_PLACEMENT_3D('',#9163,#464,#430);+#9188=ADVANCED_FACE('',(#9189),#435,.F.);+#9189=FACE_BOUND('',#9190,.F.);+#9190=EDGE_LOOP('',(#9191,#9195,#9199,#9200));+#9191=ORIENTED_EDGE('',*,*,#9192,.T.);+#9192=EDGE_CURVE('',#9179,#9193,#433,.T.);+#9193=VERTEX_POINT('',#9194);+#9194=CARTESIAN_POINT('',(-7.,-4.69,0.85));+#9195=ORIENTED_EDGE('',*,*,#9196,.T.);+#9196=EDGE_CURVE('',#9193,#2132,#9197,.T.);+#9197=LINE('',#9198,#429);+#9198=CARTESIAN_POINT('',(-7.2,-4.69,0.85));+#9199=ORIENTED_EDGE('',*,*,#2131,.F.);+#9200=ORIENTED_EDGE('',*,*,#9183,.F.);+#9201=ADVANCED_FACE('',(#9202),#9221,.F.);+#9202=FACE_BOUND('',#9203,.F.);+#9203=EDGE_LOOP('',(#9204,#9207,#9212,#9217,#9219,#9220));+#9204=ORIENTED_EDGE('',*,*,#9205,.F.);+#9205=EDGE_CURVE('',#9206,#9193,#9197,.T.);+#9206=VERTEX_POINT('',#9198);+#9207=ORIENTED_EDGE('',*,*,#9208,.T.);+#9208=EDGE_CURVE('',#9206,#9209,#9211,.T.);+#9209=VERTEX_POINT('',#9210);+#9210=CARTESIAN_POINT('',(-7.2,-4.51,0.85));+#9211=LINE('',#9198,#2066);+#9212=ORIENTED_EDGE('',*,*,#9213,.T.);+#9213=EDGE_CURVE('',#9209,#9214,#9216,.T.);+#9214=VERTEX_POINT('',#9215);+#9215=CARTESIAN_POINT('',(-7.,-4.51,0.85));+#9216=LINE('',#9210,#429);+#9217=ORIENTED_EDGE('',*,*,#9218,.T.);+#9218=EDGE_CURVE('',#9214,#2136,#9216,.T.);+#9219=ORIENTED_EDGE('',*,*,#2135,.F.);+#9220=ORIENTED_EDGE('',*,*,#9196,.F.);+#9221=PLANE('',#9222);+#9222=AXIS2_PLACEMENT_3D('',#9198,#464,#430);+#9223=ADVANCED_FACE('',(#9224),#435,.F.);+#9224=FACE_BOUND('',#9225,.F.);+#9225=EDGE_LOOP('',(#9226,#9230,#9234,#9235));+#9226=ORIENTED_EDGE('',*,*,#9227,.T.);+#9227=EDGE_CURVE('',#9214,#9228,#433,.T.);+#9228=VERTEX_POINT('',#9229);+#9229=CARTESIAN_POINT('',(-7.,-4.29,0.85));+#9230=ORIENTED_EDGE('',*,*,#9231,.T.);+#9231=EDGE_CURVE('',#9228,#2140,#9232,.T.);+#9232=LINE('',#9233,#429);+#9233=CARTESIAN_POINT('',(-7.2,-4.29,0.85));+#9234=ORIENTED_EDGE('',*,*,#2139,.F.);+#9235=ORIENTED_EDGE('',*,*,#9218,.F.);+#9236=ADVANCED_FACE('',(#9237),#9256,.F.);+#9237=FACE_BOUND('',#9238,.F.);+#9238=EDGE_LOOP('',(#9239,#9242,#9247,#9252,#9254,#9255));+#9239=ORIENTED_EDGE('',*,*,#9240,.F.);+#9240=EDGE_CURVE('',#9241,#9228,#9232,.T.);+#9241=VERTEX_POINT('',#9233);+#9242=ORIENTED_EDGE('',*,*,#9243,.T.);+#9243=EDGE_CURVE('',#9241,#9244,#9246,.T.);+#9244=VERTEX_POINT('',#9245);+#9245=CARTESIAN_POINT('',(-7.2,-4.11,0.85));+#9246=LINE('',#9233,#2066);+#9247=ORIENTED_EDGE('',*,*,#9248,.T.);+#9248=EDGE_CURVE('',#9244,#9249,#9251,.T.);+#9249=VERTEX_POINT('',#9250);+#9250=CARTESIAN_POINT('',(-7.,-4.11,0.85));+#9251=LINE('',#9245,#429);+#9252=ORIENTED_EDGE('',*,*,#9253,.T.);+#9253=EDGE_CURVE('',#9249,#2144,#9251,.T.);+#9254=ORIENTED_EDGE('',*,*,#2143,.F.);+#9255=ORIENTED_EDGE('',*,*,#9231,.F.);+#9256=PLANE('',#9257);+#9257=AXIS2_PLACEMENT_3D('',#9233,#464,#430);+#9258=ADVANCED_FACE('',(#9259),#435,.F.);+#9259=FACE_BOUND('',#9260,.F.);+#9260=EDGE_LOOP('',(#9261,#9265,#9269,#9270));+#9261=ORIENTED_EDGE('',*,*,#9262,.T.);+#9262=EDGE_CURVE('',#9249,#9263,#433,.T.);+#9263=VERTEX_POINT('',#9264);+#9264=CARTESIAN_POINT('',(-7.,-3.89,0.85));+#9265=ORIENTED_EDGE('',*,*,#9266,.T.);+#9266=EDGE_CURVE('',#9263,#2148,#9267,.T.);+#9267=LINE('',#9268,#429);+#9268=CARTESIAN_POINT('',(-7.2,-3.89,0.85));+#9269=ORIENTED_EDGE('',*,*,#2147,.F.);+#9270=ORIENTED_EDGE('',*,*,#9253,.F.);+#9271=ADVANCED_FACE('',(#9272),#9291,.F.);+#9272=FACE_BOUND('',#9273,.F.);+#9273=EDGE_LOOP('',(#9274,#9277,#9282,#9287,#9289,#9290));+#9274=ORIENTED_EDGE('',*,*,#9275,.F.);+#9275=EDGE_CURVE('',#9276,#9263,#9267,.T.);+#9276=VERTEX_POINT('',#9268);+#9277=ORIENTED_EDGE('',*,*,#9278,.T.);+#9278=EDGE_CURVE('',#9276,#9279,#9281,.T.);+#9279=VERTEX_POINT('',#9280);+#9280=CARTESIAN_POINT('',(-7.2,-3.71,0.85));+#9281=LINE('',#9268,#2066);+#9282=ORIENTED_EDGE('',*,*,#9283,.T.);+#9283=EDGE_CURVE('',#9279,#9284,#9286,.T.);+#9284=VERTEX_POINT('',#9285);+#9285=CARTESIAN_POINT('',(-7.,-3.71,0.85));+#9286=LINE('',#9280,#429);+#9287=ORIENTED_EDGE('',*,*,#9288,.T.);+#9288=EDGE_CURVE('',#9284,#2152,#9286,.T.);+#9289=ORIENTED_EDGE('',*,*,#2151,.F.);+#9290=ORIENTED_EDGE('',*,*,#9266,.F.);+#9291=PLANE('',#9292);+#9292=AXIS2_PLACEMENT_3D('',#9268,#464,#430);+#9293=ADVANCED_FACE('',(#9294),#435,.F.);+#9294=FACE_BOUND('',#9295,.F.);+#9295=EDGE_LOOP('',(#9296,#9300,#9304,#9305));+#9296=ORIENTED_EDGE('',*,*,#9297,.T.);+#9297=EDGE_CURVE('',#9284,#9298,#433,.T.);+#9298=VERTEX_POINT('',#9299);+#9299=CARTESIAN_POINT('',(-7.,-3.49,0.85));+#9300=ORIENTED_EDGE('',*,*,#9301,.T.);+#9301=EDGE_CURVE('',#9298,#2156,#9302,.T.);+#9302=LINE('',#9303,#429);+#9303=CARTESIAN_POINT('',(-7.2,-3.49,0.85));+#9304=ORIENTED_EDGE('',*,*,#2155,.F.);+#9305=ORIENTED_EDGE('',*,*,#9288,.F.);+#9306=ADVANCED_FACE('',(#9307),#9326,.F.);+#9307=FACE_BOUND('',#9308,.F.);+#9308=EDGE_LOOP('',(#9309,#9312,#9317,#9322,#9324,#9325));+#9309=ORIENTED_EDGE('',*,*,#9310,.F.);+#9310=EDGE_CURVE('',#9311,#9298,#9302,.T.);+#9311=VERTEX_POINT('',#9303);+#9312=ORIENTED_EDGE('',*,*,#9313,.T.);+#9313=EDGE_CURVE('',#9311,#9314,#9316,.T.);+#9314=VERTEX_POINT('',#9315);+#9315=CARTESIAN_POINT('',(-7.2,-3.31,0.85));+#9316=LINE('',#9303,#2066);+#9317=ORIENTED_EDGE('',*,*,#9318,.T.);+#9318=EDGE_CURVE('',#9314,#9319,#9321,.T.);+#9319=VERTEX_POINT('',#9320);+#9320=CARTESIAN_POINT('',(-7.,-3.31,0.85));+#9321=LINE('',#9315,#429);+#9322=ORIENTED_EDGE('',*,*,#9323,.T.);+#9323=EDGE_CURVE('',#9319,#2160,#9321,.T.);+#9324=ORIENTED_EDGE('',*,*,#2159,.F.);+#9325=ORIENTED_EDGE('',*,*,#9301,.F.);+#9326=PLANE('',#9327);+#9327=AXIS2_PLACEMENT_3D('',#9303,#464,#430);+#9328=ADVANCED_FACE('',(#9329),#435,.F.);+#9329=FACE_BOUND('',#9330,.F.);+#9330=EDGE_LOOP('',(#9331,#9335,#9339,#9340));+#9331=ORIENTED_EDGE('',*,*,#9332,.T.);+#9332=EDGE_CURVE('',#9319,#9333,#433,.T.);+#9333=VERTEX_POINT('',#9334);+#9334=CARTESIAN_POINT('',(-7.,-3.09,0.85));+#9335=ORIENTED_EDGE('',*,*,#9336,.T.);+#9336=EDGE_CURVE('',#9333,#2164,#9337,.T.);+#9337=LINE('',#9338,#429);+#9338=CARTESIAN_POINT('',(-7.2,-3.09,0.85));+#9339=ORIENTED_EDGE('',*,*,#2163,.F.);+#9340=ORIENTED_EDGE('',*,*,#9323,.F.);+#9341=ADVANCED_FACE('',(#9342),#9361,.F.);+#9342=FACE_BOUND('',#9343,.F.);+#9343=EDGE_LOOP('',(#9344,#9347,#9352,#9357,#9359,#9360));+#9344=ORIENTED_EDGE('',*,*,#9345,.F.);+#9345=EDGE_CURVE('',#9346,#9333,#9337,.T.);+#9346=VERTEX_POINT('',#9338);+#9347=ORIENTED_EDGE('',*,*,#9348,.T.);+#9348=EDGE_CURVE('',#9346,#9349,#9351,.T.);+#9349=VERTEX_POINT('',#9350);+#9350=CARTESIAN_POINT('',(-7.2,-2.91,0.85));+#9351=LINE('',#9338,#2066);+#9352=ORIENTED_EDGE('',*,*,#9353,.T.);+#9353=EDGE_CURVE('',#9349,#9354,#9356,.T.);+#9354=VERTEX_POINT('',#9355);+#9355=CARTESIAN_POINT('',(-7.,-2.91,0.85));+#9356=LINE('',#9350,#429);+#9357=ORIENTED_EDGE('',*,*,#9358,.T.);+#9358=EDGE_CURVE('',#9354,#2168,#9356,.T.);+#9359=ORIENTED_EDGE('',*,*,#2167,.F.);+#9360=ORIENTED_EDGE('',*,*,#9336,.F.);+#9361=PLANE('',#9362);+#9362=AXIS2_PLACEMENT_3D('',#9338,#464,#430);+#9363=ADVANCED_FACE('',(#9364),#435,.F.);+#9364=FACE_BOUND('',#9365,.F.);+#9365=EDGE_LOOP('',(#9366,#9370,#9374,#9375));+#9366=ORIENTED_EDGE('',*,*,#9367,.T.);+#9367=EDGE_CURVE('',#9354,#9368,#433,.T.);+#9368=VERTEX_POINT('',#9369);+#9369=CARTESIAN_POINT('',(-7.,-2.69,0.85));+#9370=ORIENTED_EDGE('',*,*,#9371,.T.);+#9371=EDGE_CURVE('',#9368,#2172,#9372,.T.);+#9372=LINE('',#9373,#429);+#9373=CARTESIAN_POINT('',(-7.2,-2.69,0.85));+#9374=ORIENTED_EDGE('',*,*,#2171,.F.);+#9375=ORIENTED_EDGE('',*,*,#9358,.F.);+#9376=ADVANCED_FACE('',(#9377),#9396,.F.);+#9377=FACE_BOUND('',#9378,.F.);+#9378=EDGE_LOOP('',(#9379,#9382,#9387,#9392,#9394,#9395));+#9379=ORIENTED_EDGE('',*,*,#9380,.F.);+#9380=EDGE_CURVE('',#9381,#9368,#9372,.T.);+#9381=VERTEX_POINT('',#9373);+#9382=ORIENTED_EDGE('',*,*,#9383,.T.);+#9383=EDGE_CURVE('',#9381,#9384,#9386,.T.);+#9384=VERTEX_POINT('',#9385);+#9385=CARTESIAN_POINT('',(-7.2,-2.51,0.85));+#9386=LINE('',#9373,#2066);+#9387=ORIENTED_EDGE('',*,*,#9388,.T.);+#9388=EDGE_CURVE('',#9384,#9389,#9391,.T.);+#9389=VERTEX_POINT('',#9390);+#9390=CARTESIAN_POINT('',(-7.,-2.51,0.85));+#9391=LINE('',#9385,#429);+#9392=ORIENTED_EDGE('',*,*,#9393,.T.);+#9393=EDGE_CURVE('',#9389,#2176,#9391,.T.);+#9394=ORIENTED_EDGE('',*,*,#2175,.F.);+#9395=ORIENTED_EDGE('',*,*,#9371,.F.);+#9396=PLANE('',#9397);+#9397=AXIS2_PLACEMENT_3D('',#9373,#464,#430);+#9398=ADVANCED_FACE('',(#9399),#435,.F.);+#9399=FACE_BOUND('',#9400,.F.);+#9400=EDGE_LOOP('',(#9401,#9405,#9409,#9410));+#9401=ORIENTED_EDGE('',*,*,#9402,.T.);+#9402=EDGE_CURVE('',#9389,#9403,#433,.T.);+#9403=VERTEX_POINT('',#9404);+#9404=CARTESIAN_POINT('',(-7.,-2.29,0.85));+#9405=ORIENTED_EDGE('',*,*,#9406,.T.);+#9406=EDGE_CURVE('',#9403,#2180,#9407,.T.);+#9407=LINE('',#9408,#429);+#9408=CARTESIAN_POINT('',(-7.2,-2.29,0.85));+#9409=ORIENTED_EDGE('',*,*,#2179,.F.);+#9410=ORIENTED_EDGE('',*,*,#9393,.F.);+#9411=ADVANCED_FACE('',(#9412),#9431,.F.);+#9412=FACE_BOUND('',#9413,.F.);+#9413=EDGE_LOOP('',(#9414,#9417,#9422,#9427,#9429,#9430));+#9414=ORIENTED_EDGE('',*,*,#9415,.F.);+#9415=EDGE_CURVE('',#9416,#9403,#9407,.T.);+#9416=VERTEX_POINT('',#9408);+#9417=ORIENTED_EDGE('',*,*,#9418,.T.);+#9418=EDGE_CURVE('',#9416,#9419,#9421,.T.);+#9419=VERTEX_POINT('',#9420);+#9420=CARTESIAN_POINT('',(-7.2,-2.11,0.85));+#9421=LINE('',#9408,#2066);+#9422=ORIENTED_EDGE('',*,*,#9423,.T.);+#9423=EDGE_CURVE('',#9419,#9424,#9426,.T.);+#9424=VERTEX_POINT('',#9425);+#9425=CARTESIAN_POINT('',(-7.,-2.11,0.85));+#9426=LINE('',#9420,#429);+#9427=ORIENTED_EDGE('',*,*,#9428,.T.);+#9428=EDGE_CURVE('',#9424,#2184,#9426,.T.);+#9429=ORIENTED_EDGE('',*,*,#2183,.F.);+#9430=ORIENTED_EDGE('',*,*,#9406,.F.);+#9431=PLANE('',#9432);+#9432=AXIS2_PLACEMENT_3D('',#9408,#464,#430);+#9433=ADVANCED_FACE('',(#9434),#435,.F.);+#9434=FACE_BOUND('',#9435,.F.);+#9435=EDGE_LOOP('',(#9436,#9440,#9444,#9445));+#9436=ORIENTED_EDGE('',*,*,#9437,.T.);+#9437=EDGE_CURVE('',#9424,#9438,#433,.T.);+#9438=VERTEX_POINT('',#9439);+#9439=CARTESIAN_POINT('',(-7.,-1.89,0.85));+#9440=ORIENTED_EDGE('',*,*,#9441,.T.);+#9441=EDGE_CURVE('',#9438,#2188,#9442,.T.);+#9442=LINE('',#9443,#429);+#9443=CARTESIAN_POINT('',(-7.2,-1.89,0.85));+#9444=ORIENTED_EDGE('',*,*,#2187,.F.);+#9445=ORIENTED_EDGE('',*,*,#9428,.F.);+#9446=ADVANCED_FACE('',(#9447),#9466,.F.);+#9447=FACE_BOUND('',#9448,.F.);+#9448=EDGE_LOOP('',(#9449,#9452,#9457,#9462,#9464,#9465));+#9449=ORIENTED_EDGE('',*,*,#9450,.F.);+#9450=EDGE_CURVE('',#9451,#9438,#9442,.T.);+#9451=VERTEX_POINT('',#9443);+#9452=ORIENTED_EDGE('',*,*,#9453,.T.);+#9453=EDGE_CURVE('',#9451,#9454,#9456,.T.);+#9454=VERTEX_POINT('',#9455);+#9455=CARTESIAN_POINT('',(-7.2,-1.71,0.85));+#9456=LINE('',#9443,#2066);+#9457=ORIENTED_EDGE('',*,*,#9458,.T.);+#9458=EDGE_CURVE('',#9454,#9459,#9461,.T.);+#9459=VERTEX_POINT('',#9460);+#9460=CARTESIAN_POINT('',(-7.,-1.71,0.85));+#9461=LINE('',#9455,#429);+#9462=ORIENTED_EDGE('',*,*,#9463,.T.);+#9463=EDGE_CURVE('',#9459,#2192,#9461,.T.);+#9464=ORIENTED_EDGE('',*,*,#2191,.F.);+#9465=ORIENTED_EDGE('',*,*,#9441,.F.);+#9466=PLANE('',#9467);+#9467=AXIS2_PLACEMENT_3D('',#9443,#464,#430);+#9468=ADVANCED_FACE('',(#9469),#435,.F.);+#9469=FACE_BOUND('',#9470,.F.);+#9470=EDGE_LOOP('',(#9471,#9475,#9479,#9480));+#9471=ORIENTED_EDGE('',*,*,#9472,.T.);+#9472=EDGE_CURVE('',#9459,#9473,#433,.T.);+#9473=VERTEX_POINT('',#9474);+#9474=CARTESIAN_POINT('',(-7.,-1.49,0.85));+#9475=ORIENTED_EDGE('',*,*,#9476,.T.);+#9476=EDGE_CURVE('',#9473,#2196,#9477,.T.);+#9477=LINE('',#9478,#429);+#9478=CARTESIAN_POINT('',(-7.2,-1.49,0.85));+#9479=ORIENTED_EDGE('',*,*,#2195,.F.);+#9480=ORIENTED_EDGE('',*,*,#9463,.F.);+#9481=ADVANCED_FACE('',(#9482),#9501,.F.);+#9482=FACE_BOUND('',#9483,.F.);+#9483=EDGE_LOOP('',(#9484,#9487,#9492,#9497,#9499,#9500));+#9484=ORIENTED_EDGE('',*,*,#9485,.F.);+#9485=EDGE_CURVE('',#9486,#9473,#9477,.T.);+#9486=VERTEX_POINT('',#9478);+#9487=ORIENTED_EDGE('',*,*,#9488,.T.);+#9488=EDGE_CURVE('',#9486,#9489,#9491,.T.);+#9489=VERTEX_POINT('',#9490);+#9490=CARTESIAN_POINT('',(-7.2,-1.31,0.85));+#9491=LINE('',#9478,#2066);+#9492=ORIENTED_EDGE('',*,*,#9493,.T.);+#9493=EDGE_CURVE('',#9489,#9494,#9496,.T.);+#9494=VERTEX_POINT('',#9495);+#9495=CARTESIAN_POINT('',(-7.,-1.31,0.85));+#9496=LINE('',#9490,#429);+#9497=ORIENTED_EDGE('',*,*,#9498,.T.);+#9498=EDGE_CURVE('',#9494,#2200,#9496,.T.);+#9499=ORIENTED_EDGE('',*,*,#2199,.F.);+#9500=ORIENTED_EDGE('',*,*,#9476,.F.);+#9501=PLANE('',#9502);+#9502=AXIS2_PLACEMENT_3D('',#9478,#464,#430);+#9503=ADVANCED_FACE('',(#9504),#435,.F.);+#9504=FACE_BOUND('',#9505,.F.);+#9505=EDGE_LOOP('',(#9506,#9510,#9514,#9515));+#9506=ORIENTED_EDGE('',*,*,#9507,.T.);+#9507=EDGE_CURVE('',#9494,#9508,#433,.T.);+#9508=VERTEX_POINT('',#9509);+#9509=CARTESIAN_POINT('',(-7.,-1.09,0.85));+#9510=ORIENTED_EDGE('',*,*,#9511,.T.);+#9511=EDGE_CURVE('',#9508,#2204,#9512,.T.);+#9512=LINE('',#9513,#429);+#9513=CARTESIAN_POINT('',(-7.2,-1.09,0.85));+#9514=ORIENTED_EDGE('',*,*,#2203,.F.);+#9515=ORIENTED_EDGE('',*,*,#9498,.F.);+#9516=ADVANCED_FACE('',(#9517),#9536,.F.);+#9517=FACE_BOUND('',#9518,.F.);+#9518=EDGE_LOOP('',(#9519,#9522,#9527,#9532,#9534,#9535));+#9519=ORIENTED_EDGE('',*,*,#9520,.F.);+#9520=EDGE_CURVE('',#9521,#9508,#9512,.T.);+#9521=VERTEX_POINT('',#9513);+#9522=ORIENTED_EDGE('',*,*,#9523,.T.);+#9523=EDGE_CURVE('',#9521,#9524,#9526,.T.);+#9524=VERTEX_POINT('',#9525);+#9525=CARTESIAN_POINT('',(-7.2,-0.91,0.85));+#9526=LINE('',#9513,#2066);+#9527=ORIENTED_EDGE('',*,*,#9528,.T.);+#9528=EDGE_CURVE('',#9524,#9529,#9531,.T.);+#9529=VERTEX_POINT('',#9530);+#9530=CARTESIAN_POINT('',(-7.,-0.91,0.85));+#9531=LINE('',#9525,#429);+#9532=ORIENTED_EDGE('',*,*,#9533,.T.);+#9533=EDGE_CURVE('',#9529,#2208,#9531,.T.);+#9534=ORIENTED_EDGE('',*,*,#2207,.F.);+#9535=ORIENTED_EDGE('',*,*,#9511,.F.);+#9536=PLANE('',#9537);+#9537=AXIS2_PLACEMENT_3D('',#9513,#464,#430);+#9538=ADVANCED_FACE('',(#9539),#435,.F.);+#9539=FACE_BOUND('',#9540,.F.);+#9540=EDGE_LOOP('',(#9541,#9545,#9549,#9550));+#9541=ORIENTED_EDGE('',*,*,#9542,.T.);+#9542=EDGE_CURVE('',#9529,#9543,#433,.T.);+#9543=VERTEX_POINT('',#9544);+#9544=CARTESIAN_POINT('',(-7.,-0.69,0.85));+#9545=ORIENTED_EDGE('',*,*,#9546,.T.);+#9546=EDGE_CURVE('',#9543,#2212,#9547,.T.);+#9547=LINE('',#9548,#429);+#9548=CARTESIAN_POINT('',(-7.2,-0.69,0.85));+#9549=ORIENTED_EDGE('',*,*,#2211,.F.);+#9550=ORIENTED_EDGE('',*,*,#9533,.F.);+#9551=ADVANCED_FACE('',(#9552),#9571,.F.);+#9552=FACE_BOUND('',#9553,.F.);+#9553=EDGE_LOOP('',(#9554,#9557,#9562,#9567,#9569,#9570));+#9554=ORIENTED_EDGE('',*,*,#9555,.F.);+#9555=EDGE_CURVE('',#9556,#9543,#9547,.T.);+#9556=VERTEX_POINT('',#9548);+#9557=ORIENTED_EDGE('',*,*,#9558,.T.);+#9558=EDGE_CURVE('',#9556,#9559,#9561,.T.);+#9559=VERTEX_POINT('',#9560);+#9560=CARTESIAN_POINT('',(-7.2,-0.51,0.85));+#9561=LINE('',#9548,#2066);+#9562=ORIENTED_EDGE('',*,*,#9563,.T.);+#9563=EDGE_CURVE('',#9559,#9564,#9566,.T.);+#9564=VERTEX_POINT('',#9565);+#9565=CARTESIAN_POINT('',(-7.,-0.51,0.85));+#9566=LINE('',#9560,#429);+#9567=ORIENTED_EDGE('',*,*,#9568,.T.);+#9568=EDGE_CURVE('',#9564,#2216,#9566,.T.);+#9569=ORIENTED_EDGE('',*,*,#2215,.F.);+#9570=ORIENTED_EDGE('',*,*,#9546,.F.);+#9571=PLANE('',#9572);+#9572=AXIS2_PLACEMENT_3D('',#9548,#464,#430);+#9573=ADVANCED_FACE('',(#9574),#435,.F.);+#9574=FACE_BOUND('',#9575,.F.);+#9575=EDGE_LOOP('',(#9576,#9580,#9584,#9585));+#9576=ORIENTED_EDGE('',*,*,#9577,.T.);+#9577=EDGE_CURVE('',#9564,#9578,#433,.T.);+#9578=VERTEX_POINT('',#9579);+#9579=CARTESIAN_POINT('',(-7.,-0.29,0.85));+#9580=ORIENTED_EDGE('',*,*,#9581,.T.);+#9581=EDGE_CURVE('',#9578,#2220,#9582,.T.);+#9582=LINE('',#9583,#429);+#9583=CARTESIAN_POINT('',(-7.2,-0.29,0.85));+#9584=ORIENTED_EDGE('',*,*,#2219,.F.);+#9585=ORIENTED_EDGE('',*,*,#9568,.F.);+#9586=ADVANCED_FACE('',(#9587),#9606,.F.);+#9587=FACE_BOUND('',#9588,.F.);+#9588=EDGE_LOOP('',(#9589,#9592,#9597,#9602,#9604,#9605));+#9589=ORIENTED_EDGE('',*,*,#9590,.F.);+#9590=EDGE_CURVE('',#9591,#9578,#9582,.T.);+#9591=VERTEX_POINT('',#9583);+#9592=ORIENTED_EDGE('',*,*,#9593,.T.);+#9593=EDGE_CURVE('',#9591,#9594,#9596,.T.);+#9594=VERTEX_POINT('',#9595);+#9595=CARTESIAN_POINT('',(-7.2,-0.11,0.85));+#9596=LINE('',#9583,#2066);+#9597=ORIENTED_EDGE('',*,*,#9598,.T.);+#9598=EDGE_CURVE('',#9594,#9599,#9601,.T.);+#9599=VERTEX_POINT('',#9600);+#9600=CARTESIAN_POINT('',(-7.,-0.11,0.85));+#9601=LINE('',#9595,#429);+#9602=ORIENTED_EDGE('',*,*,#9603,.T.);+#9603=EDGE_CURVE('',#9599,#2224,#9601,.T.);+#9604=ORIENTED_EDGE('',*,*,#2223,.F.);+#9605=ORIENTED_EDGE('',*,*,#9581,.F.);+#9606=PLANE('',#9607);+#9607=AXIS2_PLACEMENT_3D('',#9583,#464,#430);+#9608=ADVANCED_FACE('',(#9609),#435,.F.);+#9609=FACE_BOUND('',#9610,.F.);+#9610=EDGE_LOOP('',(#9611,#9615,#9619,#9620));+#9611=ORIENTED_EDGE('',*,*,#9612,.T.);+#9612=EDGE_CURVE('',#9599,#9613,#433,.T.);+#9613=VERTEX_POINT('',#9614);+#9614=CARTESIAN_POINT('',(-7.,0.11,0.85));+#9615=ORIENTED_EDGE('',*,*,#9616,.T.);+#9616=EDGE_CURVE('',#9613,#2228,#9617,.T.);+#9617=LINE('',#9618,#429);+#9618=CARTESIAN_POINT('',(-7.2,0.11,0.85));+#9619=ORIENTED_EDGE('',*,*,#2227,.F.);+#9620=ORIENTED_EDGE('',*,*,#9603,.F.);+#9621=ADVANCED_FACE('',(#9622),#9641,.F.);+#9622=FACE_BOUND('',#9623,.F.);+#9623=EDGE_LOOP('',(#9624,#9627,#9632,#9637,#9639,#9640));+#9624=ORIENTED_EDGE('',*,*,#9625,.F.);+#9625=EDGE_CURVE('',#9626,#9613,#9617,.T.);+#9626=VERTEX_POINT('',#9618);+#9627=ORIENTED_EDGE('',*,*,#9628,.T.);+#9628=EDGE_CURVE('',#9626,#9629,#9631,.T.);+#9629=VERTEX_POINT('',#9630);+#9630=CARTESIAN_POINT('',(-7.2,0.29,0.85));+#9631=LINE('',#9618,#2066);+#9632=ORIENTED_EDGE('',*,*,#9633,.T.);+#9633=EDGE_CURVE('',#9629,#9634,#9636,.T.);+#9634=VERTEX_POINT('',#9635);+#9635=CARTESIAN_POINT('',(-7.,0.29,0.85));+#9636=LINE('',#9630,#429);+#9637=ORIENTED_EDGE('',*,*,#9638,.T.);+#9638=EDGE_CURVE('',#9634,#2232,#9636,.T.);+#9639=ORIENTED_EDGE('',*,*,#2231,.F.);+#9640=ORIENTED_EDGE('',*,*,#9616,.F.);+#9641=PLANE('',#9642);+#9642=AXIS2_PLACEMENT_3D('',#9618,#464,#430);+#9643=ADVANCED_FACE('',(#9644),#435,.F.);+#9644=FACE_BOUND('',#9645,.F.);+#9645=EDGE_LOOP('',(#9646,#9650,#9654,#9655));+#9646=ORIENTED_EDGE('',*,*,#9647,.T.);+#9647=EDGE_CURVE('',#9634,#9648,#433,.T.);+#9648=VERTEX_POINT('',#9649);+#9649=CARTESIAN_POINT('',(-7.,0.51,0.85));+#9650=ORIENTED_EDGE('',*,*,#9651,.T.);+#9651=EDGE_CURVE('',#9648,#2236,#9652,.T.);+#9652=LINE('',#9653,#429);+#9653=CARTESIAN_POINT('',(-7.2,0.51,0.85));+#9654=ORIENTED_EDGE('',*,*,#2235,.F.);+#9655=ORIENTED_EDGE('',*,*,#9638,.F.);+#9656=ADVANCED_FACE('',(#9657),#9676,.F.);+#9657=FACE_BOUND('',#9658,.F.);+#9658=EDGE_LOOP('',(#9659,#9662,#9667,#9672,#9674,#9675));+#9659=ORIENTED_EDGE('',*,*,#9660,.F.);+#9660=EDGE_CURVE('',#9661,#9648,#9652,.T.);+#9661=VERTEX_POINT('',#9653);+#9662=ORIENTED_EDGE('',*,*,#9663,.T.);+#9663=EDGE_CURVE('',#9661,#9664,#9666,.T.);+#9664=VERTEX_POINT('',#9665);+#9665=CARTESIAN_POINT('',(-7.2,0.69,0.85));+#9666=LINE('',#9653,#2066);+#9667=ORIENTED_EDGE('',*,*,#9668,.T.);+#9668=EDGE_CURVE('',#9664,#9669,#9671,.T.);+#9669=VERTEX_POINT('',#9670);+#9670=CARTESIAN_POINT('',(-7.,0.69,0.85));+#9671=LINE('',#9665,#429);+#9672=ORIENTED_EDGE('',*,*,#9673,.T.);+#9673=EDGE_CURVE('',#9669,#2240,#9671,.T.);+#9674=ORIENTED_EDGE('',*,*,#2239,.F.);+#9675=ORIENTED_EDGE('',*,*,#9651,.F.);+#9676=PLANE('',#9677);+#9677=AXIS2_PLACEMENT_3D('',#9653,#464,#430);+#9678=ADVANCED_FACE('',(#9679),#435,.F.);+#9679=FACE_BOUND('',#9680,.F.);+#9680=EDGE_LOOP('',(#9681,#9685,#9689,#9690));+#9681=ORIENTED_EDGE('',*,*,#9682,.T.);+#9682=EDGE_CURVE('',#9669,#9683,#433,.T.);+#9683=VERTEX_POINT('',#9684);+#9684=CARTESIAN_POINT('',(-7.,0.91,0.85));+#9685=ORIENTED_EDGE('',*,*,#9686,.T.);+#9686=EDGE_CURVE('',#9683,#2244,#9687,.T.);+#9687=LINE('',#9688,#429);+#9688=CARTESIAN_POINT('',(-7.2,0.91,0.85));+#9689=ORIENTED_EDGE('',*,*,#2243,.F.);+#9690=ORIENTED_EDGE('',*,*,#9673,.F.);+#9691=ADVANCED_FACE('',(#9692),#9711,.F.);+#9692=FACE_BOUND('',#9693,.F.);+#9693=EDGE_LOOP('',(#9694,#9697,#9702,#9707,#9709,#9710));+#9694=ORIENTED_EDGE('',*,*,#9695,.F.);+#9695=EDGE_CURVE('',#9696,#9683,#9687,.T.);+#9696=VERTEX_POINT('',#9688);+#9697=ORIENTED_EDGE('',*,*,#9698,.T.);+#9698=EDGE_CURVE('',#9696,#9699,#9701,.T.);+#9699=VERTEX_POINT('',#9700);+#9700=CARTESIAN_POINT('',(-7.2,1.09,0.85));+#9701=LINE('',#9688,#2066);+#9702=ORIENTED_EDGE('',*,*,#9703,.T.);+#9703=EDGE_CURVE('',#9699,#9704,#9706,.T.);+#9704=VERTEX_POINT('',#9705);+#9705=CARTESIAN_POINT('',(-7.,1.09,0.85));+#9706=LINE('',#9700,#429);+#9707=ORIENTED_EDGE('',*,*,#9708,.T.);+#9708=EDGE_CURVE('',#9704,#2248,#9706,.T.);+#9709=ORIENTED_EDGE('',*,*,#2247,.F.);+#9710=ORIENTED_EDGE('',*,*,#9686,.F.);+#9711=PLANE('',#9712);+#9712=AXIS2_PLACEMENT_3D('',#9688,#464,#430);+#9713=ADVANCED_FACE('',(#9714),#435,.F.);+#9714=FACE_BOUND('',#9715,.F.);+#9715=EDGE_LOOP('',(#9716,#9720,#9724,#9725));+#9716=ORIENTED_EDGE('',*,*,#9717,.T.);+#9717=EDGE_CURVE('',#9704,#9718,#433,.T.);+#9718=VERTEX_POINT('',#9719);+#9719=CARTESIAN_POINT('',(-7.,1.31,0.85));+#9720=ORIENTED_EDGE('',*,*,#9721,.T.);+#9721=EDGE_CURVE('',#9718,#2252,#9722,.T.);+#9722=LINE('',#9723,#429);+#9723=CARTESIAN_POINT('',(-7.2,1.31,0.85));+#9724=ORIENTED_EDGE('',*,*,#2251,.F.);+#9725=ORIENTED_EDGE('',*,*,#9708,.F.);+#9726=ADVANCED_FACE('',(#9727),#9746,.F.);+#9727=FACE_BOUND('',#9728,.F.);+#9728=EDGE_LOOP('',(#9729,#9732,#9737,#9742,#9744,#9745));+#9729=ORIENTED_EDGE('',*,*,#9730,.F.);+#9730=EDGE_CURVE('',#9731,#9718,#9722,.T.);+#9731=VERTEX_POINT('',#9723);+#9732=ORIENTED_EDGE('',*,*,#9733,.T.);+#9733=EDGE_CURVE('',#9731,#9734,#9736,.T.);+#9734=VERTEX_POINT('',#9735);+#9735=CARTESIAN_POINT('',(-7.2,1.49,0.85));+#9736=LINE('',#9723,#2066);+#9737=ORIENTED_EDGE('',*,*,#9738,.T.);+#9738=EDGE_CURVE('',#9734,#9739,#9741,.T.);+#9739=VERTEX_POINT('',#9740);+#9740=CARTESIAN_POINT('',(-7.,1.49,0.85));+#9741=LINE('',#9735,#429);+#9742=ORIENTED_EDGE('',*,*,#9743,.T.);+#9743=EDGE_CURVE('',#9739,#2256,#9741,.T.);+#9744=ORIENTED_EDGE('',*,*,#2255,.F.);+#9745=ORIENTED_EDGE('',*,*,#9721,.F.);+#9746=PLANE('',#9747);+#9747=AXIS2_PLACEMENT_3D('',#9723,#464,#430);+#9748=ADVANCED_FACE('',(#9749),#435,.F.);+#9749=FACE_BOUND('',#9750,.F.);+#9750=EDGE_LOOP('',(#9751,#9755,#9759,#9760));+#9751=ORIENTED_EDGE('',*,*,#9752,.T.);+#9752=EDGE_CURVE('',#9739,#9753,#433,.T.);+#9753=VERTEX_POINT('',#9754);+#9754=CARTESIAN_POINT('',(-7.,1.71,0.85));+#9755=ORIENTED_EDGE('',*,*,#9756,.T.);+#9756=EDGE_CURVE('',#9753,#2260,#9757,.T.);+#9757=LINE('',#9758,#429);+#9758=CARTESIAN_POINT('',(-7.2,1.71,0.85));+#9759=ORIENTED_EDGE('',*,*,#2259,.F.);+#9760=ORIENTED_EDGE('',*,*,#9743,.F.);+#9761=ADVANCED_FACE('',(#9762),#9781,.F.);+#9762=FACE_BOUND('',#9763,.F.);+#9763=EDGE_LOOP('',(#9764,#9767,#9772,#9777,#9779,#9780));+#9764=ORIENTED_EDGE('',*,*,#9765,.F.);+#9765=EDGE_CURVE('',#9766,#9753,#9757,.T.);+#9766=VERTEX_POINT('',#9758);+#9767=ORIENTED_EDGE('',*,*,#9768,.T.);+#9768=EDGE_CURVE('',#9766,#9769,#9771,.T.);+#9769=VERTEX_POINT('',#9770);+#9770=CARTESIAN_POINT('',(-7.2,1.89,0.85));+#9771=LINE('',#9758,#2066);+#9772=ORIENTED_EDGE('',*,*,#9773,.T.);+#9773=EDGE_CURVE('',#9769,#9774,#9776,.T.);+#9774=VERTEX_POINT('',#9775);+#9775=CARTESIAN_POINT('',(-7.,1.89,0.85));+#9776=LINE('',#9770,#429);+#9777=ORIENTED_EDGE('',*,*,#9778,.T.);+#9778=EDGE_CURVE('',#9774,#2264,#9776,.T.);+#9779=ORIENTED_EDGE('',*,*,#2263,.F.);+#9780=ORIENTED_EDGE('',*,*,#9756,.F.);+#9781=PLANE('',#9782);+#9782=AXIS2_PLACEMENT_3D('',#9758,#464,#430);+#9783=ADVANCED_FACE('',(#9784),#435,.F.);+#9784=FACE_BOUND('',#9785,.F.);+#9785=EDGE_LOOP('',(#9786,#9790,#9794,#9795));+#9786=ORIENTED_EDGE('',*,*,#9787,.T.);+#9787=EDGE_CURVE('',#9774,#9788,#433,.T.);+#9788=VERTEX_POINT('',#9789);+#9789=CARTESIAN_POINT('',(-7.,2.11,0.85));+#9790=ORIENTED_EDGE('',*,*,#9791,.T.);+#9791=EDGE_CURVE('',#9788,#2268,#9792,.T.);+#9792=LINE('',#9793,#429);+#9793=CARTESIAN_POINT('',(-7.2,2.11,0.85));+#9794=ORIENTED_EDGE('',*,*,#2267,.F.);+#9795=ORIENTED_EDGE('',*,*,#9778,.F.);+#9796=ADVANCED_FACE('',(#9797),#9816,.F.);+#9797=FACE_BOUND('',#9798,.F.);+#9798=EDGE_LOOP('',(#9799,#9802,#9807,#9812,#9814,#9815));+#9799=ORIENTED_EDGE('',*,*,#9800,.F.);+#9800=EDGE_CURVE('',#9801,#9788,#9792,.T.);+#9801=VERTEX_POINT('',#9793);+#9802=ORIENTED_EDGE('',*,*,#9803,.T.);+#9803=EDGE_CURVE('',#9801,#9804,#9806,.T.);+#9804=VERTEX_POINT('',#9805);+#9805=CARTESIAN_POINT('',(-7.2,2.29,0.85));+#9806=LINE('',#9793,#2066);+#9807=ORIENTED_EDGE('',*,*,#9808,.T.);+#9808=EDGE_CURVE('',#9804,#9809,#9811,.T.);+#9809=VERTEX_POINT('',#9810);+#9810=CARTESIAN_POINT('',(-7.,2.29,0.85));+#9811=LINE('',#9805,#429);+#9812=ORIENTED_EDGE('',*,*,#9813,.T.);+#9813=EDGE_CURVE('',#9809,#2272,#9811,.T.);+#9814=ORIENTED_EDGE('',*,*,#2271,.F.);+#9815=ORIENTED_EDGE('',*,*,#9791,.F.);+#9816=PLANE('',#9817);+#9817=AXIS2_PLACEMENT_3D('',#9793,#464,#430);+#9818=ADVANCED_FACE('',(#9819),#435,.F.);+#9819=FACE_BOUND('',#9820,.F.);+#9820=EDGE_LOOP('',(#9821,#9825,#9829,#9830));+#9821=ORIENTED_EDGE('',*,*,#9822,.T.);+#9822=EDGE_CURVE('',#9809,#9823,#433,.T.);+#9823=VERTEX_POINT('',#9824);+#9824=CARTESIAN_POINT('',(-7.,2.51,0.85));+#9825=ORIENTED_EDGE('',*,*,#9826,.T.);+#9826=EDGE_CURVE('',#9823,#2276,#9827,.T.);+#9827=LINE('',#9828,#429);+#9828=CARTESIAN_POINT('',(-7.2,2.51,0.85));+#9829=ORIENTED_EDGE('',*,*,#2275,.F.);+#9830=ORIENTED_EDGE('',*,*,#9813,.F.);+#9831=ADVANCED_FACE('',(#9832),#9851,.F.);+#9832=FACE_BOUND('',#9833,.F.);+#9833=EDGE_LOOP('',(#9834,#9837,#9842,#9847,#9849,#9850));+#9834=ORIENTED_EDGE('',*,*,#9835,.F.);+#9835=EDGE_CURVE('',#9836,#9823,#9827,.T.);+#9836=VERTEX_POINT('',#9828);+#9837=ORIENTED_EDGE('',*,*,#9838,.T.);+#9838=EDGE_CURVE('',#9836,#9839,#9841,.T.);+#9839=VERTEX_POINT('',#9840);+#9840=CARTESIAN_POINT('',(-7.2,2.69,0.85));+#9841=LINE('',#9828,#2066);+#9842=ORIENTED_EDGE('',*,*,#9843,.T.);+#9843=EDGE_CURVE('',#9839,#9844,#9846,.T.);+#9844=VERTEX_POINT('',#9845);+#9845=CARTESIAN_POINT('',(-7.,2.69,0.85));+#9846=LINE('',#9840,#429);+#9847=ORIENTED_EDGE('',*,*,#9848,.T.);+#9848=EDGE_CURVE('',#9844,#2280,#9846,.T.);+#9849=ORIENTED_EDGE('',*,*,#2279,.F.);+#9850=ORIENTED_EDGE('',*,*,#9826,.F.);+#9851=PLANE('',#9852);+#9852=AXIS2_PLACEMENT_3D('',#9828,#464,#430);+#9853=ADVANCED_FACE('',(#9854),#435,.F.);+#9854=FACE_BOUND('',#9855,.F.);+#9855=EDGE_LOOP('',(#9856,#9860,#9864,#9865));+#9856=ORIENTED_EDGE('',*,*,#9857,.T.);+#9857=EDGE_CURVE('',#9844,#9858,#433,.T.);+#9858=VERTEX_POINT('',#9859);+#9859=CARTESIAN_POINT('',(-7.,2.91,0.85));+#9860=ORIENTED_EDGE('',*,*,#9861,.T.);+#9861=EDGE_CURVE('',#9858,#2284,#9862,.T.);+#9862=LINE('',#9863,#429);+#9863=CARTESIAN_POINT('',(-7.2,2.91,0.85));+#9864=ORIENTED_EDGE('',*,*,#2283,.F.);+#9865=ORIENTED_EDGE('',*,*,#9848,.F.);+#9866=ADVANCED_FACE('',(#9867),#9886,.F.);+#9867=FACE_BOUND('',#9868,.F.);+#9868=EDGE_LOOP('',(#9869,#9872,#9877,#9882,#9884,#9885));+#9869=ORIENTED_EDGE('',*,*,#9870,.F.);+#9870=EDGE_CURVE('',#9871,#9858,#9862,.T.);+#9871=VERTEX_POINT('',#9863);+#9872=ORIENTED_EDGE('',*,*,#9873,.T.);+#9873=EDGE_CURVE('',#9871,#9874,#9876,.T.);+#9874=VERTEX_POINT('',#9875);+#9875=CARTESIAN_POINT('',(-7.2,3.09,0.85));+#9876=LINE('',#9863,#2066);+#9877=ORIENTED_EDGE('',*,*,#9878,.T.);+#9878=EDGE_CURVE('',#9874,#9879,#9881,.T.);+#9879=VERTEX_POINT('',#9880);+#9880=CARTESIAN_POINT('',(-7.,3.09,0.85));+#9881=LINE('',#9875,#429);+#9882=ORIENTED_EDGE('',*,*,#9883,.T.);+#9883=EDGE_CURVE('',#9879,#2288,#9881,.T.);+#9884=ORIENTED_EDGE('',*,*,#2287,.F.);+#9885=ORIENTED_EDGE('',*,*,#9861,.F.);+#9886=PLANE('',#9887);+#9887=AXIS2_PLACEMENT_3D('',#9863,#464,#430);+#9888=ADVANCED_FACE('',(#9889),#435,.F.);+#9889=FACE_BOUND('',#9890,.F.);+#9890=EDGE_LOOP('',(#9891,#9895,#9899,#9900));+#9891=ORIENTED_EDGE('',*,*,#9892,.T.);+#9892=EDGE_CURVE('',#9879,#9893,#433,.T.);+#9893=VERTEX_POINT('',#9894);+#9894=CARTESIAN_POINT('',(-7.,3.31,0.85));+#9895=ORIENTED_EDGE('',*,*,#9896,.T.);+#9896=EDGE_CURVE('',#9893,#2292,#9897,.T.);+#9897=LINE('',#9898,#429);+#9898=CARTESIAN_POINT('',(-7.2,3.31,0.85));+#9899=ORIENTED_EDGE('',*,*,#2291,.F.);+#9900=ORIENTED_EDGE('',*,*,#9883,.F.);+#9901=ADVANCED_FACE('',(#9902),#9921,.F.);+#9902=FACE_BOUND('',#9903,.F.);+#9903=EDGE_LOOP('',(#9904,#9907,#9912,#9917,#9919,#9920));+#9904=ORIENTED_EDGE('',*,*,#9905,.F.);+#9905=EDGE_CURVE('',#9906,#9893,#9897,.T.);+#9906=VERTEX_POINT('',#9898);+#9907=ORIENTED_EDGE('',*,*,#9908,.T.);+#9908=EDGE_CURVE('',#9906,#9909,#9911,.T.);+#9909=VERTEX_POINT('',#9910);+#9910=CARTESIAN_POINT('',(-7.2,3.49,0.85));+#9911=LINE('',#9898,#2066);+#9912=ORIENTED_EDGE('',*,*,#9913,.T.);+#9913=EDGE_CURVE('',#9909,#9914,#9916,.T.);+#9914=VERTEX_POINT('',#9915);+#9915=CARTESIAN_POINT('',(-7.,3.49,0.85));+#9916=LINE('',#9910,#429);+#9917=ORIENTED_EDGE('',*,*,#9918,.T.);+#9918=EDGE_CURVE('',#9914,#2296,#9916,.T.);+#9919=ORIENTED_EDGE('',*,*,#2295,.F.);+#9920=ORIENTED_EDGE('',*,*,#9896,.F.);+#9921=PLANE('',#9922);+#9922=AXIS2_PLACEMENT_3D('',#9898,#464,#430);+#9923=ADVANCED_FACE('',(#9924),#435,.F.);+#9924=FACE_BOUND('',#9925,.F.);+#9925=EDGE_LOOP('',(#9926,#9930,#9934,#9935));+#9926=ORIENTED_EDGE('',*,*,#9927,.T.);+#9927=EDGE_CURVE('',#9914,#9928,#433,.T.);+#9928=VERTEX_POINT('',#9929);+#9929=CARTESIAN_POINT('',(-7.,3.71,0.85));+#9930=ORIENTED_EDGE('',*,*,#9931,.T.);+#9931=EDGE_CURVE('',#9928,#2300,#9932,.T.);+#9932=LINE('',#9933,#429);+#9933=CARTESIAN_POINT('',(-7.2,3.71,0.85));+#9934=ORIENTED_EDGE('',*,*,#2299,.F.);+#9935=ORIENTED_EDGE('',*,*,#9918,.F.);+#9936=ADVANCED_FACE('',(#9937),#9956,.F.);+#9937=FACE_BOUND('',#9938,.F.);+#9938=EDGE_LOOP('',(#9939,#9942,#9947,#9952,#9954,#9955));+#9939=ORIENTED_EDGE('',*,*,#9940,.F.);+#9940=EDGE_CURVE('',#9941,#9928,#9932,.T.);+#9941=VERTEX_POINT('',#9933);+#9942=ORIENTED_EDGE('',*,*,#9943,.T.);+#9943=EDGE_CURVE('',#9941,#9944,#9946,.T.);+#9944=VERTEX_POINT('',#9945);+#9945=CARTESIAN_POINT('',(-7.2,3.89,0.85));+#9946=LINE('',#9933,#2066);+#9947=ORIENTED_EDGE('',*,*,#9948,.T.);+#9948=EDGE_CURVE('',#9944,#9949,#9951,.T.);+#9949=VERTEX_POINT('',#9950);+#9950=CARTESIAN_POINT('',(-7.,3.89,0.85));+#9951=LINE('',#9945,#429);+#9952=ORIENTED_EDGE('',*,*,#9953,.T.);+#9953=EDGE_CURVE('',#9949,#2304,#9951,.T.);+#9954=ORIENTED_EDGE('',*,*,#2303,.F.);+#9955=ORIENTED_EDGE('',*,*,#9931,.F.);+#9956=PLANE('',#9957);+#9957=AXIS2_PLACEMENT_3D('',#9933,#464,#430);+#9958=ADVANCED_FACE('',(#9959),#435,.F.);+#9959=FACE_BOUND('',#9960,.F.);+#9960=EDGE_LOOP('',(#9961,#9965,#9969,#9970));+#9961=ORIENTED_EDGE('',*,*,#9962,.T.);+#9962=EDGE_CURVE('',#9949,#9963,#433,.T.);+#9963=VERTEX_POINT('',#9964);+#9964=CARTESIAN_POINT('',(-7.,4.11,0.85));+#9965=ORIENTED_EDGE('',*,*,#9966,.T.);+#9966=EDGE_CURVE('',#9963,#2308,#9967,.T.);+#9967=LINE('',#9968,#429);+#9968=CARTESIAN_POINT('',(-7.2,4.11,0.85));+#9969=ORIENTED_EDGE('',*,*,#2307,.F.);+#9970=ORIENTED_EDGE('',*,*,#9953,.F.);+#9971=ADVANCED_FACE('',(#9972),#9991,.F.);+#9972=FACE_BOUND('',#9973,.F.);+#9973=EDGE_LOOP('',(#9974,#9977,#9982,#9987,#9989,#9990));+#9974=ORIENTED_EDGE('',*,*,#9975,.F.);+#9975=EDGE_CURVE('',#9976,#9963,#9967,.T.);+#9976=VERTEX_POINT('',#9968);+#9977=ORIENTED_EDGE('',*,*,#9978,.T.);+#9978=EDGE_CURVE('',#9976,#9979,#9981,.T.);+#9979=VERTEX_POINT('',#9980);+#9980=CARTESIAN_POINT('',(-7.2,4.29,0.85));+#9981=LINE('',#9968,#2066);+#9982=ORIENTED_EDGE('',*,*,#9983,.T.);+#9983=EDGE_CURVE('',#9979,#9984,#9986,.T.);+#9984=VERTEX_POINT('',#9985);+#9985=CARTESIAN_POINT('',(-7.,4.29,0.85));+#9986=LINE('',#9980,#429);+#9987=ORIENTED_EDGE('',*,*,#9988,.T.);+#9988=EDGE_CURVE('',#9984,#2312,#9986,.T.);+#9989=ORIENTED_EDGE('',*,*,#2311,.F.);+#9990=ORIENTED_EDGE('',*,*,#9966,.F.);+#9991=PLANE('',#9992);+#9992=AXIS2_PLACEMENT_3D('',#9968,#464,#430);+#9993=ADVANCED_FACE('',(#9994),#435,.F.);+#9994=FACE_BOUND('',#9995,.F.);+#9995=EDGE_LOOP('',(#9996,#10000,#10004,#10005));+#9996=ORIENTED_EDGE('',*,*,#9997,.T.);+#9997=EDGE_CURVE('',#9984,#9998,#433,.T.);+#9998=VERTEX_POINT('',#9999);+#9999=CARTESIAN_POINT('',(-7.,4.51,0.85));+#10000=ORIENTED_EDGE('',*,*,#10001,.T.);+#10001=EDGE_CURVE('',#9998,#2316,#10002,.T.);+#10002=LINE('',#10003,#429);+#10003=CARTESIAN_POINT('',(-7.2,4.51,0.85));+#10004=ORIENTED_EDGE('',*,*,#2315,.F.);+#10005=ORIENTED_EDGE('',*,*,#9988,.F.);+#10006=ADVANCED_FACE('',(#10007),#10026,.F.);+#10007=FACE_BOUND('',#10008,.F.);+#10008=EDGE_LOOP('',(#10009,#10012,#10017,#10022,#10024,#10025));+#10009=ORIENTED_EDGE('',*,*,#10010,.F.);+#10010=EDGE_CURVE('',#10011,#9998,#10002,.T.);+#10011=VERTEX_POINT('',#10003);+#10012=ORIENTED_EDGE('',*,*,#10013,.T.);+#10013=EDGE_CURVE('',#10011,#10014,#10016,.T.);+#10014=VERTEX_POINT('',#10015);+#10015=CARTESIAN_POINT('',(-7.2,4.69,0.85));+#10016=LINE('',#10003,#2066);+#10017=ORIENTED_EDGE('',*,*,#10018,.T.);+#10018=EDGE_CURVE('',#10014,#10019,#10021,.T.);+#10019=VERTEX_POINT('',#10020);+#10020=CARTESIAN_POINT('',(-7.,4.69,0.85));+#10021=LINE('',#10015,#429);+#10022=ORIENTED_EDGE('',*,*,#10023,.T.);+#10023=EDGE_CURVE('',#10019,#2320,#10021,.T.);+#10024=ORIENTED_EDGE('',*,*,#2319,.F.);+#10025=ORIENTED_EDGE('',*,*,#10001,.F.);+#10026=PLANE('',#10027);+#10027=AXIS2_PLACEMENT_3D('',#10003,#464,#430);+#10028=ADVANCED_FACE('',(#10029),#435,.F.);+#10029=FACE_BOUND('',#10030,.F.);+#10030=EDGE_LOOP('',(#10031,#10035,#10039,#10040));+#10031=ORIENTED_EDGE('',*,*,#10032,.T.);+#10032=EDGE_CURVE('',#10019,#10033,#433,.T.);+#10033=VERTEX_POINT('',#10034);+#10034=CARTESIAN_POINT('',(-7.,4.91,0.85));+#10035=ORIENTED_EDGE('',*,*,#10036,.T.);+#10036=EDGE_CURVE('',#10033,#2324,#10037,.T.);+#10037=LINE('',#10038,#429);+#10038=CARTESIAN_POINT('',(-7.2,4.91,0.85));+#10039=ORIENTED_EDGE('',*,*,#2323,.F.);+#10040=ORIENTED_EDGE('',*,*,#10023,.F.);+#10041=ADVANCED_FACE('',(#10042),#10061,.F.);+#10042=FACE_BOUND('',#10043,.F.);+#10043=EDGE_LOOP('',(#10044,#10047,#10052,#10057,#10059,#10060));+#10044=ORIENTED_EDGE('',*,*,#10045,.F.);+#10045=EDGE_CURVE('',#10046,#10033,#10037,.T.);+#10046=VERTEX_POINT('',#10038);+#10047=ORIENTED_EDGE('',*,*,#10048,.T.);+#10048=EDGE_CURVE('',#10046,#10049,#10051,.T.);+#10049=VERTEX_POINT('',#10050);+#10050=CARTESIAN_POINT('',(-7.2,5.09,0.85));+#10051=LINE('',#10038,#2066);+#10052=ORIENTED_EDGE('',*,*,#10053,.T.);+#10053=EDGE_CURVE('',#10049,#10054,#10056,.T.);+#10054=VERTEX_POINT('',#10055);+#10055=CARTESIAN_POINT('',(-7.,5.09,0.85));+#10056=LINE('',#10050,#429);+#10057=ORIENTED_EDGE('',*,*,#10058,.T.);+#10058=EDGE_CURVE('',#10054,#2328,#10056,.T.);+#10059=ORIENTED_EDGE('',*,*,#2327,.F.);+#10060=ORIENTED_EDGE('',*,*,#10036,.F.);+#10061=PLANE('',#10062);+#10062=AXIS2_PLACEMENT_3D('',#10038,#464,#430);+#10063=ADVANCED_FACE('',(#10064),#435,.F.);+#10064=FACE_BOUND('',#10065,.F.);+#10065=EDGE_LOOP('',(#10066,#10070,#10074,#10075));+#10066=ORIENTED_EDGE('',*,*,#10067,.T.);+#10067=EDGE_CURVE('',#10054,#10068,#433,.T.);+#10068=VERTEX_POINT('',#10069);+#10069=CARTESIAN_POINT('',(-7.,5.31,0.85));+#10070=ORIENTED_EDGE('',*,*,#10071,.T.);+#10071=EDGE_CURVE('',#10068,#2332,#10072,.T.);+#10072=LINE('',#10073,#429);+#10073=CARTESIAN_POINT('',(-7.2,5.31,0.85));+#10074=ORIENTED_EDGE('',*,*,#2331,.F.);+#10075=ORIENTED_EDGE('',*,*,#10058,.F.);+#10076=ADVANCED_FACE('',(#10077),#10096,.F.);+#10077=FACE_BOUND('',#10078,.F.);+#10078=EDGE_LOOP('',(#10079,#10082,#10087,#10092,#10094,#10095));+#10079=ORIENTED_EDGE('',*,*,#10080,.F.);+#10080=EDGE_CURVE('',#10081,#10068,#10072,.T.);+#10081=VERTEX_POINT('',#10073);+#10082=ORIENTED_EDGE('',*,*,#10083,.T.);+#10083=EDGE_CURVE('',#10081,#10084,#10086,.T.);+#10084=VERTEX_POINT('',#10085);+#10085=CARTESIAN_POINT('',(-7.2,5.49,0.85));+#10086=LINE('',#10073,#2066);+#10087=ORIENTED_EDGE('',*,*,#10088,.T.);+#10088=EDGE_CURVE('',#10084,#10089,#10091,.T.);+#10089=VERTEX_POINT('',#10090);+#10090=CARTESIAN_POINT('',(-7.,5.49,0.85));+#10091=LINE('',#10085,#429);+#10092=ORIENTED_EDGE('',*,*,#10093,.T.);+#10093=EDGE_CURVE('',#10089,#2336,#10091,.T.);+#10094=ORIENTED_EDGE('',*,*,#2335,.F.);+#10095=ORIENTED_EDGE('',*,*,#10071,.F.);+#10096=PLANE('',#10097);+#10097=AXIS2_PLACEMENT_3D('',#10073,#464,#430);+#10098=ADVANCED_FACE('',(#10099),#435,.F.);+#10099=FACE_BOUND('',#10100,.F.);+#10100=EDGE_LOOP('',(#10101,#10105,#10109,#10110));+#10101=ORIENTED_EDGE('',*,*,#10102,.T.);+#10102=EDGE_CURVE('',#10089,#10103,#433,.T.);+#10103=VERTEX_POINT('',#10104);+#10104=CARTESIAN_POINT('',(-7.,5.71,0.85));+#10105=ORIENTED_EDGE('',*,*,#10106,.T.);+#10106=EDGE_CURVE('',#10103,#2340,#10107,.T.);+#10107=LINE('',#10108,#429);+#10108=CARTESIAN_POINT('',(-7.2,5.71,0.85));+#10109=ORIENTED_EDGE('',*,*,#2339,.F.);+#10110=ORIENTED_EDGE('',*,*,#10093,.F.);+#10111=ADVANCED_FACE('',(#10112),#10126,.F.);+#10112=FACE_BOUND('',#10113,.F.);+#10113=EDGE_LOOP('',(#10114,#10117,#10121,#10123,#10124,#10125));+#10114=ORIENTED_EDGE('',*,*,#10115,.F.);+#10115=EDGE_CURVE('',#10116,#10103,#10107,.T.);+#10116=VERTEX_POINT('',#10108);+#10117=ORIENTED_EDGE('',*,*,#10118,.T.);+#10118=EDGE_CURVE('',#10116,#10119,#10120,.T.);+#10119=VERTEX_POINT('',#9013);+#10120=LINE('',#10108,#2066);+#10121=ORIENTED_EDGE('',*,*,#10122,.T.);+#10122=EDGE_CURVE('',#10119,#9006,#9012,.T.);+#10123=ORIENTED_EDGE('',*,*,#9011,.T.);+#10124=ORIENTED_EDGE('',*,*,#2343,.F.);+#10125=ORIENTED_EDGE('',*,*,#10106,.F.);+#10126=PLANE('',#10127);+#10127=AXIS2_PLACEMENT_3D('',#10108,#464,#430);+#10128=ADVANCED_FACE('',(#10129),#10137,.F.);+#10129=FACE_BOUND('',#10130,.F.);+#10130=EDGE_LOOP('',(#10131,#8512,#10132,#10136));+#10131=ORIENTED_EDGE('',*,*,#2094,.T.);+#10132=ORIENTED_EDGE('',*,*,#10133,.F.);+#10133=EDGE_CURVE('',#9039,#8493,#10134,.T.);+#10134=B_SPLINE_CURVE_WITH_KNOTS('',1,(#9040,#10135),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10135=CARTESIAN_POINT('',(-6.718419117457,-6.786838234914,1.5));+#10136=ORIENTED_EDGE('',*,*,#9038,.T.);+#10137=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#9040,#10135),(#420,#2097)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10138=ADVANCED_FACE('',(#10139),#10247,.F.);+#10139=FACE_BOUND('',#10140,.F.);+#10140=EDGE_LOOP('',(#10141,#10146,#10149,#10150,#10152,#10153,#10155,#10156,#10158,#10159,#10161,#10162,#10164,#10165,#10167,#10168,#10170,#10171,#10173,#10174,#10176,#10177,#10179,#10180,#10182,#10183,#10185,#10186,#10188,#10189,#10191,#10192,#10194,#10195,#10197,#10198,#10200,#10201,#10203,#10204,#10206,#10207,#10209,#10210,#10212,#10213,#10215,#10216,#10218,#10219,#10221,#10222,#10224,#10225,#10227,#10228,#10230,#10231,#10233,#10234,#10236,#10237,#10239,#10240,#10242,#10243,#10245,#10246));+#10141=ORIENTED_EDGE('',*,*,#10142,.T.);+#10142=EDGE_CURVE('',#8582,#10143,#10145,.T.);+#10143=VERTEX_POINT('',#10144);+#10144=CARTESIAN_POINT('',(6.755919117457,6.861838234914,0.1));+#10145=LINE('',#8583,#49);+#10146=ORIENTED_EDGE('',*,*,#10147,.T.);+#10147=EDGE_CURVE('',#10143,#7278,#10148,.T.);+#10148=B_SPLINE_CURVE_WITH_KNOTS('',1,(#10144,#7279),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10149=ORIENTED_EDGE('',*,*,#7293,.F.);+#10150=ORIENTED_EDGE('',*,*,#10151,.F.);+#10151=EDGE_CURVE('',#7084,#7159,#2359,.T.);+#10152=ORIENTED_EDGE('',*,*,#7083,.F.);+#10153=ORIENTED_EDGE('',*,*,#10154,.F.);+#10154=EDGE_CURVE('',#6932,#7007,#2359,.T.);+#10155=ORIENTED_EDGE('',*,*,#6931,.F.);+#10156=ORIENTED_EDGE('',*,*,#10157,.F.);+#10157=EDGE_CURVE('',#6780,#6855,#2359,.T.);+#10158=ORIENTED_EDGE('',*,*,#6779,.F.);+#10159=ORIENTED_EDGE('',*,*,#10160,.F.);+#10160=EDGE_CURVE('',#6628,#6703,#2359,.T.);+#10161=ORIENTED_EDGE('',*,*,#6627,.F.);+#10162=ORIENTED_EDGE('',*,*,#10163,.F.);+#10163=EDGE_CURVE('',#6476,#6551,#2359,.T.);+#10164=ORIENTED_EDGE('',*,*,#6475,.F.);+#10165=ORIENTED_EDGE('',*,*,#10166,.F.);+#10166=EDGE_CURVE('',#6324,#6399,#2359,.T.);+#10167=ORIENTED_EDGE('',*,*,#6323,.F.);+#10168=ORIENTED_EDGE('',*,*,#10169,.F.);+#10169=EDGE_CURVE('',#6172,#6247,#2359,.T.);+#10170=ORIENTED_EDGE('',*,*,#6171,.F.);+#10171=ORIENTED_EDGE('',*,*,#10172,.F.);+#10172=EDGE_CURVE('',#6020,#6095,#2359,.T.);+#10173=ORIENTED_EDGE('',*,*,#6019,.F.);+#10174=ORIENTED_EDGE('',*,*,#10175,.F.);+#10175=EDGE_CURVE('',#5868,#5943,#2359,.T.);+#10176=ORIENTED_EDGE('',*,*,#5867,.F.);+#10177=ORIENTED_EDGE('',*,*,#10178,.F.);+#10178=EDGE_CURVE('',#5716,#5791,#2359,.T.);+#10179=ORIENTED_EDGE('',*,*,#5715,.F.);+#10180=ORIENTED_EDGE('',*,*,#10181,.F.);+#10181=EDGE_CURVE('',#5564,#5639,#2359,.T.);+#10182=ORIENTED_EDGE('',*,*,#5563,.F.);+#10183=ORIENTED_EDGE('',*,*,#10184,.F.);+#10184=EDGE_CURVE('',#5412,#5487,#2359,.T.);+#10185=ORIENTED_EDGE('',*,*,#5411,.F.);+#10186=ORIENTED_EDGE('',*,*,#10187,.F.);+#10187=EDGE_CURVE('',#5260,#5335,#2359,.T.);+#10188=ORIENTED_EDGE('',*,*,#5259,.F.);+#10189=ORIENTED_EDGE('',*,*,#10190,.F.);+#10190=EDGE_CURVE('',#5108,#5183,#2359,.T.);+#10191=ORIENTED_EDGE('',*,*,#5107,.F.);+#10192=ORIENTED_EDGE('',*,*,#10193,.F.);+#10193=EDGE_CURVE('',#4956,#5031,#2359,.T.);+#10194=ORIENTED_EDGE('',*,*,#4955,.F.);+#10195=ORIENTED_EDGE('',*,*,#10196,.F.);+#10196=EDGE_CURVE('',#4804,#4879,#2359,.T.);+#10197=ORIENTED_EDGE('',*,*,#4803,.F.);+#10198=ORIENTED_EDGE('',*,*,#10199,.F.);+#10199=EDGE_CURVE('',#4652,#4727,#2359,.T.);+#10200=ORIENTED_EDGE('',*,*,#4651,.F.);+#10201=ORIENTED_EDGE('',*,*,#10202,.F.);+#10202=EDGE_CURVE('',#4500,#4575,#2359,.T.);+#10203=ORIENTED_EDGE('',*,*,#4499,.F.);+#10204=ORIENTED_EDGE('',*,*,#10205,.F.);+#10205=EDGE_CURVE('',#4348,#4423,#2359,.T.);+#10206=ORIENTED_EDGE('',*,*,#4347,.F.);+#10207=ORIENTED_EDGE('',*,*,#10208,.F.);+#10208=EDGE_CURVE('',#4196,#4271,#2359,.T.);+#10209=ORIENTED_EDGE('',*,*,#4195,.F.);+#10210=ORIENTED_EDGE('',*,*,#10211,.F.);+#10211=EDGE_CURVE('',#4044,#4119,#2359,.T.);+#10212=ORIENTED_EDGE('',*,*,#4043,.F.);+#10213=ORIENTED_EDGE('',*,*,#10214,.F.);+#10214=EDGE_CURVE('',#3892,#3967,#2359,.T.);+#10215=ORIENTED_EDGE('',*,*,#3891,.F.);+#10216=ORIENTED_EDGE('',*,*,#10217,.F.);+#10217=EDGE_CURVE('',#3740,#3815,#2359,.T.);+#10218=ORIENTED_EDGE('',*,*,#3739,.F.);+#10219=ORIENTED_EDGE('',*,*,#10220,.F.);+#10220=EDGE_CURVE('',#3588,#3663,#2359,.T.);+#10221=ORIENTED_EDGE('',*,*,#3587,.F.);+#10222=ORIENTED_EDGE('',*,*,#10223,.F.);+#10223=EDGE_CURVE('',#3436,#3511,#2359,.T.);+#10224=ORIENTED_EDGE('',*,*,#3435,.F.);+#10225=ORIENTED_EDGE('',*,*,#10226,.F.);+#10226=EDGE_CURVE('',#3284,#3359,#2359,.T.);+#10227=ORIENTED_EDGE('',*,*,#3283,.F.);+#10228=ORIENTED_EDGE('',*,*,#10229,.F.);+#10229=EDGE_CURVE('',#3132,#3207,#2359,.T.);+#10230=ORIENTED_EDGE('',*,*,#3131,.F.);+#10231=ORIENTED_EDGE('',*,*,#10232,.F.);+#10232=EDGE_CURVE('',#2980,#3055,#2359,.T.);+#10233=ORIENTED_EDGE('',*,*,#2979,.F.);+#10234=ORIENTED_EDGE('',*,*,#10235,.F.);+#10235=EDGE_CURVE('',#2828,#2903,#2359,.T.);+#10236=ORIENTED_EDGE('',*,*,#2827,.F.);+#10237=ORIENTED_EDGE('',*,*,#10238,.F.);+#10238=EDGE_CURVE('',#2676,#2751,#2359,.T.);+#10239=ORIENTED_EDGE('',*,*,#2675,.F.);+#10240=ORIENTED_EDGE('',*,*,#10241,.F.);+#10241=EDGE_CURVE('',#2524,#2599,#2359,.T.);+#10242=ORIENTED_EDGE('',*,*,#2523,.F.);+#10243=ORIENTED_EDGE('',*,*,#10244,.F.);+#10244=EDGE_CURVE('',#2357,#2447,#2359,.T.);+#10245=ORIENTED_EDGE('',*,*,#2356,.F.);+#10246=ORIENTED_EDGE('',*,*,#8586,.F.);+#10247=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#8583,#2023),(#10144,#7279)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,13.65),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10248=ADVANCED_FACE('',(#10249),#10256,.F.);+#10249=FACE_BOUND('',#10250,.F.);+#10250=EDGE_LOOP('',(#10251,#2497,#10254,#10255));+#10251=ORIENTED_EDGE('',*,*,#10252,.T.);+#10252=EDGE_CURVE('',#2420,#2493,#10253,.T.);+#10253=LINE('',#2421,#451);+#10254=ORIENTED_EDGE('',*,*,#2513,.F.);+#10255=ORIENTED_EDGE('',*,*,#2427,.F.);+#10256=PLANE('',#10257);+#10257=AXIS2_PLACEMENT_3D('',#2421,#10258,#2432);+#10258=DIRECTION('',(0.,-0.986322983713,-0.16482406317));+#10259=ADVANCED_FACE('',(#10260),#10267,.F.);+#10260=FACE_BOUND('',#10261,.F.);+#10261=EDGE_LOOP('',(#10262,#2491,#10265,#10266));+#10262=ORIENTED_EDGE('',*,*,#10263,.T.);+#10263=EDGE_CURVE('',#2415,#2488,#10264,.T.);+#10264=LINE('',#2416,#451);+#10265=ORIENTED_EDGE('',*,*,#10252,.F.);+#10266=ORIENTED_EDGE('',*,*,#2419,.F.);+#10267=CYLINDRICAL_SURFACE('',#10268,1.E-01);+#10268=AXIS2_PLACEMENT_3D('',#2401,#2386,#2425);+#10269=ADVANCED_FACE('',(#10270),#10277,.F.);+#10270=FACE_BOUND('',#10271,.F.);+#10271=EDGE_LOOP('',(#10272,#2486,#10275,#10276));+#10272=ORIENTED_EDGE('',*,*,#10273,.T.);+#10273=EDGE_CURVE('',#2410,#2483,#10274,.T.);+#10274=LINE('',#2411,#451);+#10275=ORIENTED_EDGE('',*,*,#10263,.F.);+#10276=ORIENTED_EDGE('',*,*,#2414,.F.);+#10277=PLANE('',#10278);+#10278=AXIS2_PLACEMENT_3D('',#2411,#464,#408);+#10279=ADVANCED_FACE('',(#10280),#10287,.F.);+#10280=FACE_BOUND('',#10281,.F.);+#10281=EDGE_LOOP('',(#10282,#2481,#10285,#10286));+#10282=ORIENTED_EDGE('',*,*,#10283,.T.);+#10283=EDGE_CURVE('',#2405,#2478,#10284,.T.);+#10284=LINE('',#2406,#451);+#10285=ORIENTED_EDGE('',*,*,#10273,.F.);+#10286=ORIENTED_EDGE('',*,*,#2409,.F.);+#10287=PLANE('',#10288);+#10288=AXIS2_PLACEMENT_3D('',#2406,#408,#13);+#10289=ADVANCED_FACE('',(#10290),#10297,.F.);+#10290=FACE_BOUND('',#10291,.F.);+#10291=EDGE_LOOP('',(#10292,#2476,#10295,#10296));+#10292=ORIENTED_EDGE('',*,*,#10293,.T.);+#10293=EDGE_CURVE('',#2397,#2471,#10294,.T.);+#10294=LINE('',#2398,#451);+#10295=ORIENTED_EDGE('',*,*,#10283,.F.);+#10296=ORIENTED_EDGE('',*,*,#2404,.F.);+#10297=PLANE('',#10298);+#10298=AXIS2_PLACEMENT_3D('',#2398,#13,#2378);+#10299=ADVANCED_FACE('',(#10300),#10307,.T.);+#10300=FACE_BOUND('',#10301,.F.);+#10301=EDGE_LOOP('',(#10302,#2469,#10305,#10306));+#10302=ORIENTED_EDGE('',*,*,#10303,.T.);+#10303=EDGE_CURVE('',#2390,#2466,#10304,.T.);+#10304=LINE('',#2391,#451);+#10305=ORIENTED_EDGE('',*,*,#10293,.F.);+#10306=ORIENTED_EDGE('',*,*,#2396,.F.);+#10307=CYLINDRICAL_SURFACE('',#10308,0.2);+#10308=AXIS2_PLACEMENT_3D('',#2401,#2386,#2402);+#10309=ADVANCED_FACE('',(#10310),#10317,.F.);+#10310=FACE_BOUND('',#10311,.F.);+#10311=EDGE_LOOP('',(#10312,#2464,#10315,#10316));+#10312=ORIENTED_EDGE('',*,*,#10313,.T.);+#10313=EDGE_CURVE('',#2381,#2459,#10314,.T.);+#10314=LINE('',#2382,#451);+#10315=ORIENTED_EDGE('',*,*,#10303,.F.);+#10316=ORIENTED_EDGE('',*,*,#2389,.F.);+#10317=PLANE('',#10318);+#10318=AXIS2_PLACEMENT_3D('',#2382,#10319,#2394);+#10319=DIRECTION('',(0.,0.986322983713,0.16482406317));+#10320=ADVANCED_FACE('',(#10321),#10328,.F.);+#10321=FACE_BOUND('',#10322,.F.);+#10322=EDGE_LOOP('',(#10323,#2457,#10326,#10327));+#10323=ORIENTED_EDGE('',*,*,#10324,.T.);+#10324=EDGE_CURVE('',#2373,#2453,#10325,.T.);+#10325=LINE('',#2374,#451);+#10326=ORIENTED_EDGE('',*,*,#10313,.F.);+#10327=ORIENTED_EDGE('',*,*,#2380,.F.);+#10328=CYLINDRICAL_SURFACE('',#2384,0.1);+#10329=ADVANCED_FACE('',(#10330),#10335,.F.);+#10330=FACE_BOUND('',#10331,.F.);+#10331=EDGE_LOOP('',(#10332,#10333,#2451,#10334));+#10332=ORIENTED_EDGE('',*,*,#2372,.F.);+#10333=ORIENTED_EDGE('',*,*,#10244,.T.);+#10334=ORIENTED_EDGE('',*,*,#10324,.F.);+#10335=PLANE('',#10336);+#10336=AXIS2_PLACEMENT_3D('',#2376,#13,#2378);+#10337=ADVANCED_FACE('',(#10338),#10345,.F.);+#10338=FACE_BOUND('',#10339,.F.);+#10339=EDGE_LOOP('',(#10340,#2649,#10343,#10344));+#10340=ORIENTED_EDGE('',*,*,#10341,.T.);+#10341=EDGE_CURVE('',#2577,#2645,#10342,.T.);+#10342=LINE('',#2578,#451);+#10343=ORIENTED_EDGE('',*,*,#2665,.F.);+#10344=ORIENTED_EDGE('',*,*,#2582,.F.);+#10345=PLANE('',#10346);+#10346=AXIS2_PLACEMENT_3D('',#2578,#10258,#2432);+#10347=ADVANCED_FACE('',(#10348),#10355,.F.);+#10348=FACE_BOUND('',#10349,.F.);+#10349=EDGE_LOOP('',(#10350,#2643,#10353,#10354));+#10350=ORIENTED_EDGE('',*,*,#10351,.T.);+#10351=EDGE_CURVE('',#2572,#2640,#10352,.T.);+#10352=LINE('',#2573,#451);+#10353=ORIENTED_EDGE('',*,*,#10341,.F.);+#10354=ORIENTED_EDGE('',*,*,#2576,.F.);+#10355=CYLINDRICAL_SURFACE('',#10356,1.E-01);+#10356=AXIS2_PLACEMENT_3D('',#2559,#2386,#2425);+#10357=ADVANCED_FACE('',(#10358),#10365,.F.);+#10358=FACE_BOUND('',#10359,.F.);+#10359=EDGE_LOOP('',(#10360,#2638,#10363,#10364));+#10360=ORIENTED_EDGE('',*,*,#10361,.T.);+#10361=EDGE_CURVE('',#2567,#2635,#10362,.T.);+#10362=LINE('',#2568,#451);+#10363=ORIENTED_EDGE('',*,*,#10351,.F.);+#10364=ORIENTED_EDGE('',*,*,#2571,.F.);+#10365=PLANE('',#10366);+#10366=AXIS2_PLACEMENT_3D('',#2568,#464,#408);+#10367=ADVANCED_FACE('',(#10368),#10375,.F.);+#10368=FACE_BOUND('',#10369,.F.);+#10369=EDGE_LOOP('',(#10370,#2633,#10373,#10374));+#10370=ORIENTED_EDGE('',*,*,#10371,.T.);+#10371=EDGE_CURVE('',#2562,#2630,#10372,.T.);+#10372=LINE('',#2563,#451);+#10373=ORIENTED_EDGE('',*,*,#10361,.F.);+#10374=ORIENTED_EDGE('',*,*,#2566,.F.);+#10375=PLANE('',#10376);+#10376=AXIS2_PLACEMENT_3D('',#2563,#408,#13);+#10377=ADVANCED_FACE('',(#10378),#10385,.F.);+#10378=FACE_BOUND('',#10379,.F.);+#10379=EDGE_LOOP('',(#10380,#2628,#10383,#10384));+#10380=ORIENTED_EDGE('',*,*,#10381,.T.);+#10381=EDGE_CURVE('',#2555,#2623,#10382,.T.);+#10382=LINE('',#2556,#451);+#10383=ORIENTED_EDGE('',*,*,#10371,.F.);+#10384=ORIENTED_EDGE('',*,*,#2561,.F.);+#10385=PLANE('',#10386);+#10386=AXIS2_PLACEMENT_3D('',#2556,#13,#2378);+#10387=ADVANCED_FACE('',(#10388),#10395,.T.);+#10388=FACE_BOUND('',#10389,.F.);+#10389=EDGE_LOOP('',(#10390,#2621,#10393,#10394));+#10390=ORIENTED_EDGE('',*,*,#10391,.T.);+#10391=EDGE_CURVE('',#2550,#2618,#10392,.T.);+#10392=LINE('',#2551,#451);+#10393=ORIENTED_EDGE('',*,*,#10381,.F.);+#10394=ORIENTED_EDGE('',*,*,#2554,.F.);+#10395=CYLINDRICAL_SURFACE('',#10396,0.2);+#10396=AXIS2_PLACEMENT_3D('',#2559,#2386,#2402);+#10397=ADVANCED_FACE('',(#10398),#10405,.F.);+#10398=FACE_BOUND('',#10399,.F.);+#10399=EDGE_LOOP('',(#10400,#2616,#10403,#10404));+#10400=ORIENTED_EDGE('',*,*,#10401,.T.);+#10401=EDGE_CURVE('',#2543,#2611,#10402,.T.);+#10402=LINE('',#2544,#451);+#10403=ORIENTED_EDGE('',*,*,#10391,.F.);+#10404=ORIENTED_EDGE('',*,*,#2549,.F.);+#10405=PLANE('',#10406);+#10406=AXIS2_PLACEMENT_3D('',#2544,#10319,#2394);+#10407=ADVANCED_FACE('',(#10408),#10415,.F.);+#10408=FACE_BOUND('',#10409,.F.);+#10409=EDGE_LOOP('',(#10410,#2609,#10413,#10414));+#10410=ORIENTED_EDGE('',*,*,#10411,.T.);+#10411=EDGE_CURVE('',#2537,#2605,#10412,.T.);+#10412=LINE('',#2538,#451);+#10413=ORIENTED_EDGE('',*,*,#10401,.F.);+#10414=ORIENTED_EDGE('',*,*,#2542,.F.);+#10415=CYLINDRICAL_SURFACE('',#2546,0.1);+#10416=ADVANCED_FACE('',(#10417),#10422,.F.);+#10417=FACE_BOUND('',#10418,.F.);+#10418=EDGE_LOOP('',(#10419,#10420,#2603,#10421));+#10419=ORIENTED_EDGE('',*,*,#2536,.F.);+#10420=ORIENTED_EDGE('',*,*,#10241,.T.);+#10421=ORIENTED_EDGE('',*,*,#10411,.F.);+#10422=PLANE('',#10423);+#10423=AXIS2_PLACEMENT_3D('',#2540,#13,#2378);+#10424=ADVANCED_FACE('',(#10425),#10432,.F.);+#10425=FACE_BOUND('',#10426,.F.);+#10426=EDGE_LOOP('',(#10427,#2801,#10430,#10431));+#10427=ORIENTED_EDGE('',*,*,#10428,.T.);+#10428=EDGE_CURVE('',#2729,#2797,#10429,.T.);+#10429=LINE('',#2730,#451);+#10430=ORIENTED_EDGE('',*,*,#2817,.F.);+#10431=ORIENTED_EDGE('',*,*,#2734,.F.);+#10432=PLANE('',#10433);+#10433=AXIS2_PLACEMENT_3D('',#2730,#10258,#2432);+#10434=ADVANCED_FACE('',(#10435),#10442,.F.);+#10435=FACE_BOUND('',#10436,.F.);+#10436=EDGE_LOOP('',(#10437,#2795,#10440,#10441));+#10437=ORIENTED_EDGE('',*,*,#10438,.T.);+#10438=EDGE_CURVE('',#2724,#2792,#10439,.T.);+#10439=LINE('',#2725,#451);+#10440=ORIENTED_EDGE('',*,*,#10428,.F.);+#10441=ORIENTED_EDGE('',*,*,#2728,.F.);+#10442=CYLINDRICAL_SURFACE('',#10443,1.E-01);+#10443=AXIS2_PLACEMENT_3D('',#2711,#2386,#2425);+#10444=ADVANCED_FACE('',(#10445),#10452,.F.);+#10445=FACE_BOUND('',#10446,.F.);+#10446=EDGE_LOOP('',(#10447,#2790,#10450,#10451));+#10447=ORIENTED_EDGE('',*,*,#10448,.T.);+#10448=EDGE_CURVE('',#2719,#2787,#10449,.T.);+#10449=LINE('',#2720,#451);+#10450=ORIENTED_EDGE('',*,*,#10438,.F.);+#10451=ORIENTED_EDGE('',*,*,#2723,.F.);+#10452=PLANE('',#10453);+#10453=AXIS2_PLACEMENT_3D('',#2720,#464,#408);+#10454=ADVANCED_FACE('',(#10455),#10462,.F.);+#10455=FACE_BOUND('',#10456,.F.);+#10456=EDGE_LOOP('',(#10457,#2785,#10460,#10461));+#10457=ORIENTED_EDGE('',*,*,#10458,.T.);+#10458=EDGE_CURVE('',#2714,#2782,#10459,.T.);+#10459=LINE('',#2715,#451);+#10460=ORIENTED_EDGE('',*,*,#10448,.F.);+#10461=ORIENTED_EDGE('',*,*,#2718,.F.);+#10462=PLANE('',#10463);+#10463=AXIS2_PLACEMENT_3D('',#2715,#408,#13);+#10464=ADVANCED_FACE('',(#10465),#10472,.F.);+#10465=FACE_BOUND('',#10466,.F.);+#10466=EDGE_LOOP('',(#10467,#2780,#10470,#10471));+#10467=ORIENTED_EDGE('',*,*,#10468,.T.);+#10468=EDGE_CURVE('',#2707,#2775,#10469,.T.);+#10469=LINE('',#2708,#451);+#10470=ORIENTED_EDGE('',*,*,#10458,.F.);+#10471=ORIENTED_EDGE('',*,*,#2713,.F.);+#10472=PLANE('',#10473);+#10473=AXIS2_PLACEMENT_3D('',#2708,#13,#2378);+#10474=ADVANCED_FACE('',(#10475),#10482,.T.);+#10475=FACE_BOUND('',#10476,.F.);+#10476=EDGE_LOOP('',(#10477,#2773,#10480,#10481));+#10477=ORIENTED_EDGE('',*,*,#10478,.T.);+#10478=EDGE_CURVE('',#2702,#2770,#10479,.T.);+#10479=LINE('',#2703,#451);+#10480=ORIENTED_EDGE('',*,*,#10468,.F.);+#10481=ORIENTED_EDGE('',*,*,#2706,.F.);+#10482=CYLINDRICAL_SURFACE('',#10483,0.2);+#10483=AXIS2_PLACEMENT_3D('',#2711,#2386,#2402);+#10484=ADVANCED_FACE('',(#10485),#10492,.F.);+#10485=FACE_BOUND('',#10486,.F.);+#10486=EDGE_LOOP('',(#10487,#2768,#10490,#10491));+#10487=ORIENTED_EDGE('',*,*,#10488,.T.);+#10488=EDGE_CURVE('',#2695,#2763,#10489,.T.);+#10489=LINE('',#2696,#451);+#10490=ORIENTED_EDGE('',*,*,#10478,.F.);+#10491=ORIENTED_EDGE('',*,*,#2701,.F.);+#10492=PLANE('',#10493);+#10493=AXIS2_PLACEMENT_3D('',#2696,#10319,#2394);+#10494=ADVANCED_FACE('',(#10495),#10502,.F.);+#10495=FACE_BOUND('',#10496,.F.);+#10496=EDGE_LOOP('',(#10497,#2761,#10500,#10501));+#10497=ORIENTED_EDGE('',*,*,#10498,.T.);+#10498=EDGE_CURVE('',#2689,#2757,#10499,.T.);+#10499=LINE('',#2690,#451);+#10500=ORIENTED_EDGE('',*,*,#10488,.F.);+#10501=ORIENTED_EDGE('',*,*,#2694,.F.);+#10502=CYLINDRICAL_SURFACE('',#2698,0.1);+#10503=ADVANCED_FACE('',(#10504),#10509,.F.);+#10504=FACE_BOUND('',#10505,.F.);+#10505=EDGE_LOOP('',(#10506,#10507,#2755,#10508));+#10506=ORIENTED_EDGE('',*,*,#2688,.F.);+#10507=ORIENTED_EDGE('',*,*,#10238,.T.);+#10508=ORIENTED_EDGE('',*,*,#10498,.F.);+#10509=PLANE('',#10510);+#10510=AXIS2_PLACEMENT_3D('',#2692,#13,#2378);+#10511=ADVANCED_FACE('',(#10512),#10519,.F.);+#10512=FACE_BOUND('',#10513,.F.);+#10513=EDGE_LOOP('',(#10514,#2953,#10517,#10518));+#10514=ORIENTED_EDGE('',*,*,#10515,.T.);+#10515=EDGE_CURVE('',#2881,#2949,#10516,.T.);+#10516=LINE('',#2882,#451);+#10517=ORIENTED_EDGE('',*,*,#2969,.F.);+#10518=ORIENTED_EDGE('',*,*,#2886,.F.);+#10519=PLANE('',#10520);+#10520=AXIS2_PLACEMENT_3D('',#2882,#10258,#2432);+#10521=ADVANCED_FACE('',(#10522),#10529,.F.);+#10522=FACE_BOUND('',#10523,.F.);+#10523=EDGE_LOOP('',(#10524,#2947,#10527,#10528));+#10524=ORIENTED_EDGE('',*,*,#10525,.T.);+#10525=EDGE_CURVE('',#2876,#2944,#10526,.T.);+#10526=LINE('',#2877,#451);+#10527=ORIENTED_EDGE('',*,*,#10515,.F.);+#10528=ORIENTED_EDGE('',*,*,#2880,.F.);+#10529=CYLINDRICAL_SURFACE('',#10530,1.E-01);+#10530=AXIS2_PLACEMENT_3D('',#2863,#2386,#2425);+#10531=ADVANCED_FACE('',(#10532),#10539,.F.);+#10532=FACE_BOUND('',#10533,.F.);+#10533=EDGE_LOOP('',(#10534,#2942,#10537,#10538));+#10534=ORIENTED_EDGE('',*,*,#10535,.T.);+#10535=EDGE_CURVE('',#2871,#2939,#10536,.T.);+#10536=LINE('',#2872,#451);+#10537=ORIENTED_EDGE('',*,*,#10525,.F.);+#10538=ORIENTED_EDGE('',*,*,#2875,.F.);+#10539=PLANE('',#10540);+#10540=AXIS2_PLACEMENT_3D('',#2872,#464,#408);+#10541=ADVANCED_FACE('',(#10542),#10549,.F.);+#10542=FACE_BOUND('',#10543,.F.);+#10543=EDGE_LOOP('',(#10544,#2937,#10547,#10548));+#10544=ORIENTED_EDGE('',*,*,#10545,.T.);+#10545=EDGE_CURVE('',#2866,#2934,#10546,.T.);+#10546=LINE('',#2867,#451);+#10547=ORIENTED_EDGE('',*,*,#10535,.F.);+#10548=ORIENTED_EDGE('',*,*,#2870,.F.);+#10549=PLANE('',#10550);+#10550=AXIS2_PLACEMENT_3D('',#2867,#408,#13);+#10551=ADVANCED_FACE('',(#10552),#10559,.F.);+#10552=FACE_BOUND('',#10553,.F.);+#10553=EDGE_LOOP('',(#10554,#2932,#10557,#10558));+#10554=ORIENTED_EDGE('',*,*,#10555,.T.);+#10555=EDGE_CURVE('',#2859,#2927,#10556,.T.);+#10556=LINE('',#2860,#451);+#10557=ORIENTED_EDGE('',*,*,#10545,.F.);+#10558=ORIENTED_EDGE('',*,*,#2865,.F.);+#10559=PLANE('',#10560);+#10560=AXIS2_PLACEMENT_3D('',#2860,#13,#2378);+#10561=ADVANCED_FACE('',(#10562),#10569,.T.);+#10562=FACE_BOUND('',#10563,.F.);+#10563=EDGE_LOOP('',(#10564,#2925,#10567,#10568));+#10564=ORIENTED_EDGE('',*,*,#10565,.T.);+#10565=EDGE_CURVE('',#2854,#2922,#10566,.T.);+#10566=LINE('',#2855,#451);+#10567=ORIENTED_EDGE('',*,*,#10555,.F.);+#10568=ORIENTED_EDGE('',*,*,#2858,.F.);+#10569=CYLINDRICAL_SURFACE('',#10570,0.2);+#10570=AXIS2_PLACEMENT_3D('',#2863,#2386,#2402);+#10571=ADVANCED_FACE('',(#10572),#10579,.F.);+#10572=FACE_BOUND('',#10573,.F.);+#10573=EDGE_LOOP('',(#10574,#2920,#10577,#10578));+#10574=ORIENTED_EDGE('',*,*,#10575,.T.);+#10575=EDGE_CURVE('',#2847,#2915,#10576,.T.);+#10576=LINE('',#2848,#451);+#10577=ORIENTED_EDGE('',*,*,#10565,.F.);+#10578=ORIENTED_EDGE('',*,*,#2853,.F.);+#10579=PLANE('',#10580);+#10580=AXIS2_PLACEMENT_3D('',#2848,#10319,#2394);+#10581=ADVANCED_FACE('',(#10582),#10589,.F.);+#10582=FACE_BOUND('',#10583,.F.);+#10583=EDGE_LOOP('',(#10584,#2913,#10587,#10588));+#10584=ORIENTED_EDGE('',*,*,#10585,.T.);+#10585=EDGE_CURVE('',#2841,#2909,#10586,.T.);+#10586=LINE('',#2842,#451);+#10587=ORIENTED_EDGE('',*,*,#10575,.F.);+#10588=ORIENTED_EDGE('',*,*,#2846,.F.);+#10589=CYLINDRICAL_SURFACE('',#2850,0.1);+#10590=ADVANCED_FACE('',(#10591),#10596,.F.);+#10591=FACE_BOUND('',#10592,.F.);+#10592=EDGE_LOOP('',(#10593,#10594,#2907,#10595));+#10593=ORIENTED_EDGE('',*,*,#2840,.F.);+#10594=ORIENTED_EDGE('',*,*,#10235,.T.);+#10595=ORIENTED_EDGE('',*,*,#10585,.F.);+#10596=PLANE('',#10597);+#10597=AXIS2_PLACEMENT_3D('',#2844,#13,#2378);+#10598=ADVANCED_FACE('',(#10599),#10606,.F.);+#10599=FACE_BOUND('',#10600,.F.);+#10600=EDGE_LOOP('',(#10601,#3105,#10604,#10605));+#10601=ORIENTED_EDGE('',*,*,#10602,.T.);+#10602=EDGE_CURVE('',#3033,#3101,#10603,.T.);+#10603=LINE('',#3034,#451);+#10604=ORIENTED_EDGE('',*,*,#3121,.F.);+#10605=ORIENTED_EDGE('',*,*,#3038,.F.);+#10606=PLANE('',#10607);+#10607=AXIS2_PLACEMENT_3D('',#3034,#10258,#2432);+#10608=ADVANCED_FACE('',(#10609),#10616,.F.);+#10609=FACE_BOUND('',#10610,.F.);+#10610=EDGE_LOOP('',(#10611,#3099,#10614,#10615));+#10611=ORIENTED_EDGE('',*,*,#10612,.T.);+#10612=EDGE_CURVE('',#3028,#3096,#10613,.T.);+#10613=LINE('',#3029,#451);+#10614=ORIENTED_EDGE('',*,*,#10602,.F.);+#10615=ORIENTED_EDGE('',*,*,#3032,.F.);+#10616=CYLINDRICAL_SURFACE('',#10617,1.E-01);+#10617=AXIS2_PLACEMENT_3D('',#3015,#2386,#2425);+#10618=ADVANCED_FACE('',(#10619),#10626,.F.);+#10619=FACE_BOUND('',#10620,.F.);+#10620=EDGE_LOOP('',(#10621,#3094,#10624,#10625));+#10621=ORIENTED_EDGE('',*,*,#10622,.T.);+#10622=EDGE_CURVE('',#3023,#3091,#10623,.T.);+#10623=LINE('',#3024,#451);+#10624=ORIENTED_EDGE('',*,*,#10612,.F.);+#10625=ORIENTED_EDGE('',*,*,#3027,.F.);+#10626=PLANE('',#10627);+#10627=AXIS2_PLACEMENT_3D('',#3024,#464,#408);+#10628=ADVANCED_FACE('',(#10629),#10636,.F.);+#10629=FACE_BOUND('',#10630,.F.);+#10630=EDGE_LOOP('',(#10631,#3089,#10634,#10635));+#10631=ORIENTED_EDGE('',*,*,#10632,.T.);+#10632=EDGE_CURVE('',#3018,#3086,#10633,.T.);+#10633=LINE('',#3019,#451);+#10634=ORIENTED_EDGE('',*,*,#10622,.F.);+#10635=ORIENTED_EDGE('',*,*,#3022,.F.);+#10636=PLANE('',#10637);+#10637=AXIS2_PLACEMENT_3D('',#3019,#408,#13);+#10638=ADVANCED_FACE('',(#10639),#10646,.F.);+#10639=FACE_BOUND('',#10640,.F.);+#10640=EDGE_LOOP('',(#10641,#3084,#10644,#10645));+#10641=ORIENTED_EDGE('',*,*,#10642,.T.);+#10642=EDGE_CURVE('',#3011,#3079,#10643,.T.);+#10643=LINE('',#3012,#451);+#10644=ORIENTED_EDGE('',*,*,#10632,.F.);+#10645=ORIENTED_EDGE('',*,*,#3017,.F.);+#10646=PLANE('',#10647);+#10647=AXIS2_PLACEMENT_3D('',#3012,#13,#2378);+#10648=ADVANCED_FACE('',(#10649),#10656,.T.);+#10649=FACE_BOUND('',#10650,.F.);+#10650=EDGE_LOOP('',(#10651,#3077,#10654,#10655));+#10651=ORIENTED_EDGE('',*,*,#10652,.T.);+#10652=EDGE_CURVE('',#3006,#3074,#10653,.T.);+#10653=LINE('',#3007,#451);+#10654=ORIENTED_EDGE('',*,*,#10642,.F.);+#10655=ORIENTED_EDGE('',*,*,#3010,.F.);+#10656=CYLINDRICAL_SURFACE('',#10657,0.2);+#10657=AXIS2_PLACEMENT_3D('',#3015,#2386,#2402);+#10658=ADVANCED_FACE('',(#10659),#10666,.F.);+#10659=FACE_BOUND('',#10660,.F.);+#10660=EDGE_LOOP('',(#10661,#3072,#10664,#10665));+#10661=ORIENTED_EDGE('',*,*,#10662,.T.);+#10662=EDGE_CURVE('',#2999,#3067,#10663,.T.);+#10663=LINE('',#3000,#451);+#10664=ORIENTED_EDGE('',*,*,#10652,.F.);+#10665=ORIENTED_EDGE('',*,*,#3005,.F.);+#10666=PLANE('',#10667);+#10667=AXIS2_PLACEMENT_3D('',#3000,#10319,#2394);+#10668=ADVANCED_FACE('',(#10669),#10676,.F.);+#10669=FACE_BOUND('',#10670,.F.);+#10670=EDGE_LOOP('',(#10671,#3065,#10674,#10675));+#10671=ORIENTED_EDGE('',*,*,#10672,.T.);+#10672=EDGE_CURVE('',#2993,#3061,#10673,.T.);+#10673=LINE('',#2994,#451);+#10674=ORIENTED_EDGE('',*,*,#10662,.F.);+#10675=ORIENTED_EDGE('',*,*,#2998,.F.);+#10676=CYLINDRICAL_SURFACE('',#3002,0.1);+#10677=ADVANCED_FACE('',(#10678),#10683,.F.);+#10678=FACE_BOUND('',#10679,.F.);+#10679=EDGE_LOOP('',(#10680,#10681,#3059,#10682));+#10680=ORIENTED_EDGE('',*,*,#2992,.F.);+#10681=ORIENTED_EDGE('',*,*,#10232,.T.);+#10682=ORIENTED_EDGE('',*,*,#10672,.F.);+#10683=PLANE('',#10684);+#10684=AXIS2_PLACEMENT_3D('',#2996,#13,#2378);+#10685=ADVANCED_FACE('',(#10686),#10693,.F.);+#10686=FACE_BOUND('',#10687,.F.);+#10687=EDGE_LOOP('',(#10688,#3257,#10691,#10692));+#10688=ORIENTED_EDGE('',*,*,#10689,.T.);+#10689=EDGE_CURVE('',#3185,#3253,#10690,.T.);+#10690=LINE('',#3186,#451);+#10691=ORIENTED_EDGE('',*,*,#3273,.F.);+#10692=ORIENTED_EDGE('',*,*,#3190,.F.);+#10693=PLANE('',#10694);+#10694=AXIS2_PLACEMENT_3D('',#3186,#10258,#2432);+#10695=ADVANCED_FACE('',(#10696),#10703,.F.);+#10696=FACE_BOUND('',#10697,.F.);+#10697=EDGE_LOOP('',(#10698,#3251,#10701,#10702));+#10698=ORIENTED_EDGE('',*,*,#10699,.T.);+#10699=EDGE_CURVE('',#3180,#3248,#10700,.T.);+#10700=LINE('',#3181,#451);+#10701=ORIENTED_EDGE('',*,*,#10689,.F.);+#10702=ORIENTED_EDGE('',*,*,#3184,.F.);+#10703=CYLINDRICAL_SURFACE('',#10704,1.E-01);+#10704=AXIS2_PLACEMENT_3D('',#3167,#2386,#2425);+#10705=ADVANCED_FACE('',(#10706),#10713,.F.);+#10706=FACE_BOUND('',#10707,.F.);+#10707=EDGE_LOOP('',(#10708,#3246,#10711,#10712));+#10708=ORIENTED_EDGE('',*,*,#10709,.T.);+#10709=EDGE_CURVE('',#3175,#3243,#10710,.T.);+#10710=LINE('',#3176,#451);+#10711=ORIENTED_EDGE('',*,*,#10699,.F.);+#10712=ORIENTED_EDGE('',*,*,#3179,.F.);+#10713=PLANE('',#10714);+#10714=AXIS2_PLACEMENT_3D('',#3176,#464,#408);+#10715=ADVANCED_FACE('',(#10716),#10723,.F.);+#10716=FACE_BOUND('',#10717,.F.);+#10717=EDGE_LOOP('',(#10718,#3241,#10721,#10722));+#10718=ORIENTED_EDGE('',*,*,#10719,.T.);+#10719=EDGE_CURVE('',#3170,#3238,#10720,.T.);+#10720=LINE('',#3171,#451);+#10721=ORIENTED_EDGE('',*,*,#10709,.F.);+#10722=ORIENTED_EDGE('',*,*,#3174,.F.);+#10723=PLANE('',#10724);+#10724=AXIS2_PLACEMENT_3D('',#3171,#408,#13);+#10725=ADVANCED_FACE('',(#10726),#10733,.F.);+#10726=FACE_BOUND('',#10727,.F.);+#10727=EDGE_LOOP('',(#10728,#3236,#10731,#10732));+#10728=ORIENTED_EDGE('',*,*,#10729,.T.);+#10729=EDGE_CURVE('',#3163,#3231,#10730,.T.);+#10730=LINE('',#3164,#451);+#10731=ORIENTED_EDGE('',*,*,#10719,.F.);+#10732=ORIENTED_EDGE('',*,*,#3169,.F.);+#10733=PLANE('',#10734);+#10734=AXIS2_PLACEMENT_3D('',#3164,#13,#2378);+#10735=ADVANCED_FACE('',(#10736),#10743,.T.);+#10736=FACE_BOUND('',#10737,.F.);+#10737=EDGE_LOOP('',(#10738,#3229,#10741,#10742));+#10738=ORIENTED_EDGE('',*,*,#10739,.T.);+#10739=EDGE_CURVE('',#3158,#3226,#10740,.T.);+#10740=LINE('',#3159,#451);+#10741=ORIENTED_EDGE('',*,*,#10729,.F.);+#10742=ORIENTED_EDGE('',*,*,#3162,.F.);+#10743=CYLINDRICAL_SURFACE('',#10744,0.2);+#10744=AXIS2_PLACEMENT_3D('',#3167,#2386,#2402);+#10745=ADVANCED_FACE('',(#10746),#10753,.F.);+#10746=FACE_BOUND('',#10747,.F.);+#10747=EDGE_LOOP('',(#10748,#3224,#10751,#10752));+#10748=ORIENTED_EDGE('',*,*,#10749,.T.);+#10749=EDGE_CURVE('',#3151,#3219,#10750,.T.);+#10750=LINE('',#3152,#451);+#10751=ORIENTED_EDGE('',*,*,#10739,.F.);+#10752=ORIENTED_EDGE('',*,*,#3157,.F.);+#10753=PLANE('',#10754);+#10754=AXIS2_PLACEMENT_3D('',#3152,#10319,#2394);+#10755=ADVANCED_FACE('',(#10756),#10763,.F.);+#10756=FACE_BOUND('',#10757,.F.);+#10757=EDGE_LOOP('',(#10758,#3217,#10761,#10762));+#10758=ORIENTED_EDGE('',*,*,#10759,.T.);+#10759=EDGE_CURVE('',#3145,#3213,#10760,.T.);+#10760=LINE('',#3146,#451);+#10761=ORIENTED_EDGE('',*,*,#10749,.F.);+#10762=ORIENTED_EDGE('',*,*,#3150,.F.);+#10763=CYLINDRICAL_SURFACE('',#3154,0.1);+#10764=ADVANCED_FACE('',(#10765),#10770,.F.);+#10765=FACE_BOUND('',#10766,.F.);+#10766=EDGE_LOOP('',(#10767,#10768,#3211,#10769));+#10767=ORIENTED_EDGE('',*,*,#3144,.F.);+#10768=ORIENTED_EDGE('',*,*,#10229,.T.);+#10769=ORIENTED_EDGE('',*,*,#10759,.F.);+#10770=PLANE('',#10771);+#10771=AXIS2_PLACEMENT_3D('',#3148,#13,#2378);+#10772=ADVANCED_FACE('',(#10773),#10780,.F.);+#10773=FACE_BOUND('',#10774,.F.);+#10774=EDGE_LOOP('',(#10775,#3409,#10778,#10779));+#10775=ORIENTED_EDGE('',*,*,#10776,.T.);+#10776=EDGE_CURVE('',#3337,#3405,#10777,.T.);+#10777=LINE('',#3338,#451);+#10778=ORIENTED_EDGE('',*,*,#3425,.F.);+#10779=ORIENTED_EDGE('',*,*,#3342,.F.);+#10780=PLANE('',#10781);+#10781=AXIS2_PLACEMENT_3D('',#3338,#10258,#2432);+#10782=ADVANCED_FACE('',(#10783),#10790,.F.);+#10783=FACE_BOUND('',#10784,.F.);+#10784=EDGE_LOOP('',(#10785,#3403,#10788,#10789));+#10785=ORIENTED_EDGE('',*,*,#10786,.T.);+#10786=EDGE_CURVE('',#3332,#3400,#10787,.T.);+#10787=LINE('',#3333,#451);+#10788=ORIENTED_EDGE('',*,*,#10776,.F.);+#10789=ORIENTED_EDGE('',*,*,#3336,.F.);+#10790=CYLINDRICAL_SURFACE('',#10791,1.E-01);+#10791=AXIS2_PLACEMENT_3D('',#3319,#2386,#2425);+#10792=ADVANCED_FACE('',(#10793),#10800,.F.);+#10793=FACE_BOUND('',#10794,.F.);+#10794=EDGE_LOOP('',(#10795,#3398,#10798,#10799));+#10795=ORIENTED_EDGE('',*,*,#10796,.T.);+#10796=EDGE_CURVE('',#3327,#3395,#10797,.T.);+#10797=LINE('',#3328,#451);+#10798=ORIENTED_EDGE('',*,*,#10786,.F.);+#10799=ORIENTED_EDGE('',*,*,#3331,.F.);+#10800=PLANE('',#10801);+#10801=AXIS2_PLACEMENT_3D('',#3328,#464,#408);+#10802=ADVANCED_FACE('',(#10803),#10810,.F.);+#10803=FACE_BOUND('',#10804,.F.);+#10804=EDGE_LOOP('',(#10805,#3393,#10808,#10809));+#10805=ORIENTED_EDGE('',*,*,#10806,.T.);+#10806=EDGE_CURVE('',#3322,#3390,#10807,.T.);+#10807=LINE('',#3323,#451);+#10808=ORIENTED_EDGE('',*,*,#10796,.F.);+#10809=ORIENTED_EDGE('',*,*,#3326,.F.);+#10810=PLANE('',#10811);+#10811=AXIS2_PLACEMENT_3D('',#3323,#408,#13);+#10812=ADVANCED_FACE('',(#10813),#10820,.F.);+#10813=FACE_BOUND('',#10814,.F.);+#10814=EDGE_LOOP('',(#10815,#3388,#10818,#10819));+#10815=ORIENTED_EDGE('',*,*,#10816,.T.);+#10816=EDGE_CURVE('',#3315,#3383,#10817,.T.);+#10817=LINE('',#3316,#451);+#10818=ORIENTED_EDGE('',*,*,#10806,.F.);+#10819=ORIENTED_EDGE('',*,*,#3321,.F.);+#10820=PLANE('',#10821);+#10821=AXIS2_PLACEMENT_3D('',#3316,#13,#2378);+#10822=ADVANCED_FACE('',(#10823),#10830,.T.);+#10823=FACE_BOUND('',#10824,.F.);+#10824=EDGE_LOOP('',(#10825,#3381,#10828,#10829));+#10825=ORIENTED_EDGE('',*,*,#10826,.T.);+#10826=EDGE_CURVE('',#3310,#3378,#10827,.T.);+#10827=LINE('',#3311,#451);+#10828=ORIENTED_EDGE('',*,*,#10816,.F.);+#10829=ORIENTED_EDGE('',*,*,#3314,.F.);+#10830=CYLINDRICAL_SURFACE('',#10831,0.2);+#10831=AXIS2_PLACEMENT_3D('',#3319,#2386,#2402);+#10832=ADVANCED_FACE('',(#10833),#10840,.F.);+#10833=FACE_BOUND('',#10834,.F.);+#10834=EDGE_LOOP('',(#10835,#3376,#10838,#10839));+#10835=ORIENTED_EDGE('',*,*,#10836,.T.);+#10836=EDGE_CURVE('',#3303,#3371,#10837,.T.);+#10837=LINE('',#3304,#451);+#10838=ORIENTED_EDGE('',*,*,#10826,.F.);+#10839=ORIENTED_EDGE('',*,*,#3309,.F.);+#10840=PLANE('',#10841);+#10841=AXIS2_PLACEMENT_3D('',#3304,#10319,#2394);+#10842=ADVANCED_FACE('',(#10843),#10850,.F.);+#10843=FACE_BOUND('',#10844,.F.);+#10844=EDGE_LOOP('',(#10845,#3369,#10848,#10849));+#10845=ORIENTED_EDGE('',*,*,#10846,.T.);+#10846=EDGE_CURVE('',#3297,#3365,#10847,.T.);+#10847=LINE('',#3298,#451);+#10848=ORIENTED_EDGE('',*,*,#10836,.F.);+#10849=ORIENTED_EDGE('',*,*,#3302,.F.);+#10850=CYLINDRICAL_SURFACE('',#3306,0.1);+#10851=ADVANCED_FACE('',(#10852),#10857,.F.);+#10852=FACE_BOUND('',#10853,.F.);+#10853=EDGE_LOOP('',(#10854,#10855,#3363,#10856));+#10854=ORIENTED_EDGE('',*,*,#3296,.F.);+#10855=ORIENTED_EDGE('',*,*,#10226,.T.);+#10856=ORIENTED_EDGE('',*,*,#10846,.F.);+#10857=PLANE('',#10858);+#10858=AXIS2_PLACEMENT_3D('',#3300,#13,#2378);+#10859=ADVANCED_FACE('',(#10860),#10867,.F.);+#10860=FACE_BOUND('',#10861,.F.);+#10861=EDGE_LOOP('',(#10862,#3561,#10865,#10866));+#10862=ORIENTED_EDGE('',*,*,#10863,.T.);+#10863=EDGE_CURVE('',#3489,#3557,#10864,.T.);+#10864=LINE('',#3490,#451);+#10865=ORIENTED_EDGE('',*,*,#3577,.F.);+#10866=ORIENTED_EDGE('',*,*,#3494,.F.);+#10867=PLANE('',#10868);+#10868=AXIS2_PLACEMENT_3D('',#3490,#10258,#2432);+#10869=ADVANCED_FACE('',(#10870),#10877,.F.);+#10870=FACE_BOUND('',#10871,.F.);+#10871=EDGE_LOOP('',(#10872,#3555,#10875,#10876));+#10872=ORIENTED_EDGE('',*,*,#10873,.T.);+#10873=EDGE_CURVE('',#3484,#3552,#10874,.T.);+#10874=LINE('',#3485,#451);+#10875=ORIENTED_EDGE('',*,*,#10863,.F.);+#10876=ORIENTED_EDGE('',*,*,#3488,.F.);+#10877=CYLINDRICAL_SURFACE('',#10878,1.E-01);+#10878=AXIS2_PLACEMENT_3D('',#3471,#2386,#2425);+#10879=ADVANCED_FACE('',(#10880),#10887,.F.);+#10880=FACE_BOUND('',#10881,.F.);+#10881=EDGE_LOOP('',(#10882,#3550,#10885,#10886));+#10882=ORIENTED_EDGE('',*,*,#10883,.T.);+#10883=EDGE_CURVE('',#3479,#3547,#10884,.T.);+#10884=LINE('',#3480,#451);+#10885=ORIENTED_EDGE('',*,*,#10873,.F.);+#10886=ORIENTED_EDGE('',*,*,#3483,.F.);+#10887=PLANE('',#10888);+#10888=AXIS2_PLACEMENT_3D('',#3480,#464,#408);+#10889=ADVANCED_FACE('',(#10890),#10897,.F.);+#10890=FACE_BOUND('',#10891,.F.);+#10891=EDGE_LOOP('',(#10892,#3545,#10895,#10896));+#10892=ORIENTED_EDGE('',*,*,#10893,.T.);+#10893=EDGE_CURVE('',#3474,#3542,#10894,.T.);+#10894=LINE('',#3475,#451);+#10895=ORIENTED_EDGE('',*,*,#10883,.F.);+#10896=ORIENTED_EDGE('',*,*,#3478,.F.);+#10897=PLANE('',#10898);+#10898=AXIS2_PLACEMENT_3D('',#3475,#408,#13);+#10899=ADVANCED_FACE('',(#10900),#10907,.F.);+#10900=FACE_BOUND('',#10901,.F.);+#10901=EDGE_LOOP('',(#10902,#3540,#10905,#10906));+#10902=ORIENTED_EDGE('',*,*,#10903,.T.);+#10903=EDGE_CURVE('',#3467,#3535,#10904,.T.);+#10904=LINE('',#3468,#451);+#10905=ORIENTED_EDGE('',*,*,#10893,.F.);+#10906=ORIENTED_EDGE('',*,*,#3473,.F.);+#10907=PLANE('',#10908);+#10908=AXIS2_PLACEMENT_3D('',#3468,#13,#2378);+#10909=ADVANCED_FACE('',(#10910),#10917,.T.);+#10910=FACE_BOUND('',#10911,.F.);+#10911=EDGE_LOOP('',(#10912,#3533,#10915,#10916));+#10912=ORIENTED_EDGE('',*,*,#10913,.T.);+#10913=EDGE_CURVE('',#3462,#3530,#10914,.T.);+#10914=LINE('',#3463,#451);+#10915=ORIENTED_EDGE('',*,*,#10903,.F.);+#10916=ORIENTED_EDGE('',*,*,#3466,.F.);+#10917=CYLINDRICAL_SURFACE('',#10918,0.2);+#10918=AXIS2_PLACEMENT_3D('',#3471,#2386,#2402);+#10919=ADVANCED_FACE('',(#10920),#10927,.F.);+#10920=FACE_BOUND('',#10921,.F.);+#10921=EDGE_LOOP('',(#10922,#3528,#10925,#10926));+#10922=ORIENTED_EDGE('',*,*,#10923,.T.);+#10923=EDGE_CURVE('',#3455,#3523,#10924,.T.);+#10924=LINE('',#3456,#451);+#10925=ORIENTED_EDGE('',*,*,#10913,.F.);+#10926=ORIENTED_EDGE('',*,*,#3461,.F.);+#10927=PLANE('',#10928);+#10928=AXIS2_PLACEMENT_3D('',#3456,#10319,#2394);+#10929=ADVANCED_FACE('',(#10930),#10937,.F.);+#10930=FACE_BOUND('',#10931,.F.);+#10931=EDGE_LOOP('',(#10932,#3521,#10935,#10936));+#10932=ORIENTED_EDGE('',*,*,#10933,.T.);+#10933=EDGE_CURVE('',#3449,#3517,#10934,.T.);+#10934=LINE('',#3450,#451);+#10935=ORIENTED_EDGE('',*,*,#10923,.F.);+#10936=ORIENTED_EDGE('',*,*,#3454,.F.);+#10937=CYLINDRICAL_SURFACE('',#3458,0.1);+#10938=ADVANCED_FACE('',(#10939),#10944,.F.);+#10939=FACE_BOUND('',#10940,.F.);+#10940=EDGE_LOOP('',(#10941,#10942,#3515,#10943));+#10941=ORIENTED_EDGE('',*,*,#3448,.F.);+#10942=ORIENTED_EDGE('',*,*,#10223,.T.);+#10943=ORIENTED_EDGE('',*,*,#10933,.F.);+#10944=PLANE('',#10945);+#10945=AXIS2_PLACEMENT_3D('',#3452,#13,#2378);+#10946=ADVANCED_FACE('',(#10947),#10954,.F.);+#10947=FACE_BOUND('',#10948,.F.);+#10948=EDGE_LOOP('',(#10949,#3713,#10952,#10953));+#10949=ORIENTED_EDGE('',*,*,#10950,.T.);+#10950=EDGE_CURVE('',#3641,#3709,#10951,.T.);+#10951=LINE('',#3642,#451);+#10952=ORIENTED_EDGE('',*,*,#3729,.F.);+#10953=ORIENTED_EDGE('',*,*,#3646,.F.);+#10954=PLANE('',#10955);+#10955=AXIS2_PLACEMENT_3D('',#3642,#10258,#2432);+#10956=ADVANCED_FACE('',(#10957),#10964,.F.);+#10957=FACE_BOUND('',#10958,.F.);+#10958=EDGE_LOOP('',(#10959,#3707,#10962,#10963));+#10959=ORIENTED_EDGE('',*,*,#10960,.T.);+#10960=EDGE_CURVE('',#3636,#3704,#10961,.T.);+#10961=LINE('',#3637,#451);+#10962=ORIENTED_EDGE('',*,*,#10950,.F.);+#10963=ORIENTED_EDGE('',*,*,#3640,.F.);+#10964=CYLINDRICAL_SURFACE('',#10965,1.E-01);+#10965=AXIS2_PLACEMENT_3D('',#3623,#2386,#2425);+#10966=ADVANCED_FACE('',(#10967),#10974,.F.);+#10967=FACE_BOUND('',#10968,.F.);+#10968=EDGE_LOOP('',(#10969,#3702,#10972,#10973));+#10969=ORIENTED_EDGE('',*,*,#10970,.T.);+#10970=EDGE_CURVE('',#3631,#3699,#10971,.T.);+#10971=LINE('',#3632,#451);+#10972=ORIENTED_EDGE('',*,*,#10960,.F.);+#10973=ORIENTED_EDGE('',*,*,#3635,.F.);+#10974=PLANE('',#10975);+#10975=AXIS2_PLACEMENT_3D('',#3632,#464,#408);+#10976=ADVANCED_FACE('',(#10977),#10984,.F.);+#10977=FACE_BOUND('',#10978,.F.);+#10978=EDGE_LOOP('',(#10979,#3697,#10982,#10983));+#10979=ORIENTED_EDGE('',*,*,#10980,.T.);+#10980=EDGE_CURVE('',#3626,#3694,#10981,.T.);+#10981=LINE('',#3627,#451);+#10982=ORIENTED_EDGE('',*,*,#10970,.F.);+#10983=ORIENTED_EDGE('',*,*,#3630,.F.);+#10984=PLANE('',#10985);+#10985=AXIS2_PLACEMENT_3D('',#3627,#408,#13);+#10986=ADVANCED_FACE('',(#10987),#10994,.F.);+#10987=FACE_BOUND('',#10988,.F.);+#10988=EDGE_LOOP('',(#10989,#3692,#10992,#10993));+#10989=ORIENTED_EDGE('',*,*,#10990,.T.);+#10990=EDGE_CURVE('',#3619,#3687,#10991,.T.);+#10991=LINE('',#3620,#451);+#10992=ORIENTED_EDGE('',*,*,#10980,.F.);+#10993=ORIENTED_EDGE('',*,*,#3625,.F.);+#10994=PLANE('',#10995);+#10995=AXIS2_PLACEMENT_3D('',#3620,#13,#2378);+#10996=ADVANCED_FACE('',(#10997),#11004,.T.);+#10997=FACE_BOUND('',#10998,.F.);+#10998=EDGE_LOOP('',(#10999,#3685,#11002,#11003));+#10999=ORIENTED_EDGE('',*,*,#11000,.T.);+#11000=EDGE_CURVE('',#3614,#3682,#11001,.T.);+#11001=LINE('',#3615,#451);+#11002=ORIENTED_EDGE('',*,*,#10990,.F.);+#11003=ORIENTED_EDGE('',*,*,#3618,.F.);+#11004=CYLINDRICAL_SURFACE('',#11005,0.2);+#11005=AXIS2_PLACEMENT_3D('',#3623,#2386,#2402);+#11006=ADVANCED_FACE('',(#11007),#11014,.F.);+#11007=FACE_BOUND('',#11008,.F.);+#11008=EDGE_LOOP('',(#11009,#3680,#11012,#11013));+#11009=ORIENTED_EDGE('',*,*,#11010,.T.);+#11010=EDGE_CURVE('',#3607,#3675,#11011,.T.);+#11011=LINE('',#3608,#451);+#11012=ORIENTED_EDGE('',*,*,#11000,.F.);+#11013=ORIENTED_EDGE('',*,*,#3613,.F.);+#11014=PLANE('',#11015);+#11015=AXIS2_PLACEMENT_3D('',#3608,#10319,#2394);+#11016=ADVANCED_FACE('',(#11017),#11024,.F.);+#11017=FACE_BOUND('',#11018,.F.);+#11018=EDGE_LOOP('',(#11019,#3673,#11022,#11023));+#11019=ORIENTED_EDGE('',*,*,#11020,.T.);+#11020=EDGE_CURVE('',#3601,#3669,#11021,.T.);+#11021=LINE('',#3602,#451);+#11022=ORIENTED_EDGE('',*,*,#11010,.F.);+#11023=ORIENTED_EDGE('',*,*,#3606,.F.);+#11024=CYLINDRICAL_SURFACE('',#3610,0.1);+#11025=ADVANCED_FACE('',(#11026),#11031,.F.);+#11026=FACE_BOUND('',#11027,.F.);+#11027=EDGE_LOOP('',(#11028,#11029,#3667,#11030));+#11028=ORIENTED_EDGE('',*,*,#3600,.F.);+#11029=ORIENTED_EDGE('',*,*,#10220,.T.);+#11030=ORIENTED_EDGE('',*,*,#11020,.F.);+#11031=PLANE('',#11032);+#11032=AXIS2_PLACEMENT_3D('',#3604,#13,#2378);+#11033=ADVANCED_FACE('',(#11034),#11041,.F.);+#11034=FACE_BOUND('',#11035,.F.);+#11035=EDGE_LOOP('',(#11036,#3865,#11039,#11040));+#11036=ORIENTED_EDGE('',*,*,#11037,.T.);+#11037=EDGE_CURVE('',#3793,#3861,#11038,.T.);+#11038=LINE('',#3794,#451);+#11039=ORIENTED_EDGE('',*,*,#3881,.F.);+#11040=ORIENTED_EDGE('',*,*,#3798,.F.);+#11041=PLANE('',#11042);+#11042=AXIS2_PLACEMENT_3D('',#3794,#10258,#2432);+#11043=ADVANCED_FACE('',(#11044),#11051,.F.);+#11044=FACE_BOUND('',#11045,.F.);+#11045=EDGE_LOOP('',(#11046,#3859,#11049,#11050));+#11046=ORIENTED_EDGE('',*,*,#11047,.T.);+#11047=EDGE_CURVE('',#3788,#3856,#11048,.T.);+#11048=LINE('',#3789,#451);+#11049=ORIENTED_EDGE('',*,*,#11037,.F.);+#11050=ORIENTED_EDGE('',*,*,#3792,.F.);+#11051=CYLINDRICAL_SURFACE('',#11052,1.E-01);+#11052=AXIS2_PLACEMENT_3D('',#3775,#2386,#2425);+#11053=ADVANCED_FACE('',(#11054),#11061,.F.);+#11054=FACE_BOUND('',#11055,.F.);+#11055=EDGE_LOOP('',(#11056,#3854,#11059,#11060));+#11056=ORIENTED_EDGE('',*,*,#11057,.T.);+#11057=EDGE_CURVE('',#3783,#3851,#11058,.T.);+#11058=LINE('',#3784,#451);+#11059=ORIENTED_EDGE('',*,*,#11047,.F.);+#11060=ORIENTED_EDGE('',*,*,#3787,.F.);+#11061=PLANE('',#11062);+#11062=AXIS2_PLACEMENT_3D('',#3784,#464,#408);+#11063=ADVANCED_FACE('',(#11064),#11071,.F.);+#11064=FACE_BOUND('',#11065,.F.);+#11065=EDGE_LOOP('',(#11066,#3849,#11069,#11070));+#11066=ORIENTED_EDGE('',*,*,#11067,.T.);+#11067=EDGE_CURVE('',#3778,#3846,#11068,.T.);+#11068=LINE('',#3779,#451);+#11069=ORIENTED_EDGE('',*,*,#11057,.F.);+#11070=ORIENTED_EDGE('',*,*,#3782,.F.);+#11071=PLANE('',#11072);+#11072=AXIS2_PLACEMENT_3D('',#3779,#408,#13);+#11073=ADVANCED_FACE('',(#11074),#11081,.F.);+#11074=FACE_BOUND('',#11075,.F.);+#11075=EDGE_LOOP('',(#11076,#3844,#11079,#11080));+#11076=ORIENTED_EDGE('',*,*,#11077,.T.);+#11077=EDGE_CURVE('',#3771,#3839,#11078,.T.);+#11078=LINE('',#3772,#451);+#11079=ORIENTED_EDGE('',*,*,#11067,.F.);+#11080=ORIENTED_EDGE('',*,*,#3777,.F.);+#11081=PLANE('',#11082);+#11082=AXIS2_PLACEMENT_3D('',#3772,#13,#2378);+#11083=ADVANCED_FACE('',(#11084),#11091,.T.);+#11084=FACE_BOUND('',#11085,.F.);+#11085=EDGE_LOOP('',(#11086,#3837,#11089,#11090));+#11086=ORIENTED_EDGE('',*,*,#11087,.T.);+#11087=EDGE_CURVE('',#3766,#3834,#11088,.T.);+#11088=LINE('',#3767,#451);+#11089=ORIENTED_EDGE('',*,*,#11077,.F.);+#11090=ORIENTED_EDGE('',*,*,#3770,.F.);+#11091=CYLINDRICAL_SURFACE('',#11092,0.2);+#11092=AXIS2_PLACEMENT_3D('',#3775,#2386,#2402);+#11093=ADVANCED_FACE('',(#11094),#11101,.F.);+#11094=FACE_BOUND('',#11095,.F.);+#11095=EDGE_LOOP('',(#11096,#3832,#11099,#11100));+#11096=ORIENTED_EDGE('',*,*,#11097,.T.);+#11097=EDGE_CURVE('',#3759,#3827,#11098,.T.);+#11098=LINE('',#3760,#451);+#11099=ORIENTED_EDGE('',*,*,#11087,.F.);+#11100=ORIENTED_EDGE('',*,*,#3765,.F.);+#11101=PLANE('',#11102);+#11102=AXIS2_PLACEMENT_3D('',#3760,#10319,#2394);+#11103=ADVANCED_FACE('',(#11104),#11111,.F.);+#11104=FACE_BOUND('',#11105,.F.);+#11105=EDGE_LOOP('',(#11106,#3825,#11109,#11110));+#11106=ORIENTED_EDGE('',*,*,#11107,.T.);+#11107=EDGE_CURVE('',#3753,#3821,#11108,.T.);+#11108=LINE('',#3754,#451);+#11109=ORIENTED_EDGE('',*,*,#11097,.F.);+#11110=ORIENTED_EDGE('',*,*,#3758,.F.);+#11111=CYLINDRICAL_SURFACE('',#3762,0.1);+#11112=ADVANCED_FACE('',(#11113),#11118,.F.);+#11113=FACE_BOUND('',#11114,.F.);+#11114=EDGE_LOOP('',(#11115,#11116,#3819,#11117));+#11115=ORIENTED_EDGE('',*,*,#3752,.F.);+#11116=ORIENTED_EDGE('',*,*,#10217,.T.);+#11117=ORIENTED_EDGE('',*,*,#11107,.F.);+#11118=PLANE('',#11119);+#11119=AXIS2_PLACEMENT_3D('',#3756,#13,#2378);+#11120=ADVANCED_FACE('',(#11121),#11128,.F.);+#11121=FACE_BOUND('',#11122,.F.);+#11122=EDGE_LOOP('',(#11123,#4017,#11126,#11127));+#11123=ORIENTED_EDGE('',*,*,#11124,.T.);+#11124=EDGE_CURVE('',#3945,#4013,#11125,.T.);+#11125=LINE('',#3946,#451);+#11126=ORIENTED_EDGE('',*,*,#4033,.F.);+#11127=ORIENTED_EDGE('',*,*,#3950,.F.);+#11128=PLANE('',#11129);+#11129=AXIS2_PLACEMENT_3D('',#3946,#10258,#2432);+#11130=ADVANCED_FACE('',(#11131),#11138,.F.);+#11131=FACE_BOUND('',#11132,.F.);+#11132=EDGE_LOOP('',(#11133,#4011,#11136,#11137));+#11133=ORIENTED_EDGE('',*,*,#11134,.T.);+#11134=EDGE_CURVE('',#3940,#4008,#11135,.T.);+#11135=LINE('',#3941,#451);+#11136=ORIENTED_EDGE('',*,*,#11124,.F.);+#11137=ORIENTED_EDGE('',*,*,#3944,.F.);+#11138=CYLINDRICAL_SURFACE('',#11139,1.E-01);+#11139=AXIS2_PLACEMENT_3D('',#3927,#2386,#2425);+#11140=ADVANCED_FACE('',(#11141),#11148,.F.);+#11141=FACE_BOUND('',#11142,.F.);+#11142=EDGE_LOOP('',(#11143,#4006,#11146,#11147));+#11143=ORIENTED_EDGE('',*,*,#11144,.T.);+#11144=EDGE_CURVE('',#3935,#4003,#11145,.T.);+#11145=LINE('',#3936,#451);+#11146=ORIENTED_EDGE('',*,*,#11134,.F.);+#11147=ORIENTED_EDGE('',*,*,#3939,.F.);+#11148=PLANE('',#11149);+#11149=AXIS2_PLACEMENT_3D('',#3936,#464,#408);+#11150=ADVANCED_FACE('',(#11151),#11158,.F.);+#11151=FACE_BOUND('',#11152,.F.);+#11152=EDGE_LOOP('',(#11153,#4001,#11156,#11157));+#11153=ORIENTED_EDGE('',*,*,#11154,.T.);+#11154=EDGE_CURVE('',#3930,#3998,#11155,.T.);+#11155=LINE('',#3931,#451);+#11156=ORIENTED_EDGE('',*,*,#11144,.F.);+#11157=ORIENTED_EDGE('',*,*,#3934,.F.);+#11158=PLANE('',#11159);+#11159=AXIS2_PLACEMENT_3D('',#3931,#408,#13);+#11160=ADVANCED_FACE('',(#11161),#11168,.F.);+#11161=FACE_BOUND('',#11162,.F.);+#11162=EDGE_LOOP('',(#11163,#3996,#11166,#11167));+#11163=ORIENTED_EDGE('',*,*,#11164,.T.);+#11164=EDGE_CURVE('',#3923,#3991,#11165,.T.);+#11165=LINE('',#3924,#451);+#11166=ORIENTED_EDGE('',*,*,#11154,.F.);+#11167=ORIENTED_EDGE('',*,*,#3929,.F.);+#11168=PLANE('',#11169);+#11169=AXIS2_PLACEMENT_3D('',#3924,#13,#2378);+#11170=ADVANCED_FACE('',(#11171),#11178,.T.);+#11171=FACE_BOUND('',#11172,.F.);+#11172=EDGE_LOOP('',(#11173,#3989,#11176,#11177));+#11173=ORIENTED_EDGE('',*,*,#11174,.T.);+#11174=EDGE_CURVE('',#3918,#3986,#11175,.T.);+#11175=LINE('',#3919,#451);+#11176=ORIENTED_EDGE('',*,*,#11164,.F.);+#11177=ORIENTED_EDGE('',*,*,#3922,.F.);+#11178=CYLINDRICAL_SURFACE('',#11179,0.2);+#11179=AXIS2_PLACEMENT_3D('',#3927,#2386,#2402);+#11180=ADVANCED_FACE('',(#11181),#11188,.F.);+#11181=FACE_BOUND('',#11182,.F.);+#11182=EDGE_LOOP('',(#11183,#3984,#11186,#11187));+#11183=ORIENTED_EDGE('',*,*,#11184,.T.);+#11184=EDGE_CURVE('',#3911,#3979,#11185,.T.);+#11185=LINE('',#3912,#451);+#11186=ORIENTED_EDGE('',*,*,#11174,.F.);+#11187=ORIENTED_EDGE('',*,*,#3917,.F.);+#11188=PLANE('',#11189);+#11189=AXIS2_PLACEMENT_3D('',#3912,#10319,#2394);+#11190=ADVANCED_FACE('',(#11191),#11198,.F.);+#11191=FACE_BOUND('',#11192,.F.);+#11192=EDGE_LOOP('',(#11193,#3977,#11196,#11197));+#11193=ORIENTED_EDGE('',*,*,#11194,.T.);+#11194=EDGE_CURVE('',#3905,#3973,#11195,.T.);+#11195=LINE('',#3906,#451);+#11196=ORIENTED_EDGE('',*,*,#11184,.F.);+#11197=ORIENTED_EDGE('',*,*,#3910,.F.);+#11198=CYLINDRICAL_SURFACE('',#3914,0.1);+#11199=ADVANCED_FACE('',(#11200),#11205,.F.);+#11200=FACE_BOUND('',#11201,.F.);+#11201=EDGE_LOOP('',(#11202,#11203,#3971,#11204));+#11202=ORIENTED_EDGE('',*,*,#3904,.F.);+#11203=ORIENTED_EDGE('',*,*,#10214,.T.);+#11204=ORIENTED_EDGE('',*,*,#11194,.F.);+#11205=PLANE('',#11206);+#11206=AXIS2_PLACEMENT_3D('',#3908,#13,#2378);+#11207=ADVANCED_FACE('',(#11208),#11215,.F.);+#11208=FACE_BOUND('',#11209,.F.);+#11209=EDGE_LOOP('',(#11210,#4169,#11213,#11214));+#11210=ORIENTED_EDGE('',*,*,#11211,.T.);+#11211=EDGE_CURVE('',#4097,#4165,#11212,.T.);+#11212=LINE('',#4098,#451);+#11213=ORIENTED_EDGE('',*,*,#4185,.F.);+#11214=ORIENTED_EDGE('',*,*,#4102,.F.);+#11215=PLANE('',#11216);+#11216=AXIS2_PLACEMENT_3D('',#4098,#10258,#2432);+#11217=ADVANCED_FACE('',(#11218),#11225,.F.);+#11218=FACE_BOUND('',#11219,.F.);+#11219=EDGE_LOOP('',(#11220,#4163,#11223,#11224));+#11220=ORIENTED_EDGE('',*,*,#11221,.T.);+#11221=EDGE_CURVE('',#4092,#4160,#11222,.T.);+#11222=LINE('',#4093,#451);+#11223=ORIENTED_EDGE('',*,*,#11211,.F.);+#11224=ORIENTED_EDGE('',*,*,#4096,.F.);+#11225=CYLINDRICAL_SURFACE('',#11226,1.E-01);+#11226=AXIS2_PLACEMENT_3D('',#4079,#2386,#2425);+#11227=ADVANCED_FACE('',(#11228),#11235,.F.);+#11228=FACE_BOUND('',#11229,.F.);+#11229=EDGE_LOOP('',(#11230,#4158,#11233,#11234));+#11230=ORIENTED_EDGE('',*,*,#11231,.T.);+#11231=EDGE_CURVE('',#4087,#4155,#11232,.T.);+#11232=LINE('',#4088,#451);+#11233=ORIENTED_EDGE('',*,*,#11221,.F.);+#11234=ORIENTED_EDGE('',*,*,#4091,.F.);+#11235=PLANE('',#11236);+#11236=AXIS2_PLACEMENT_3D('',#4088,#464,#408);+#11237=ADVANCED_FACE('',(#11238),#11245,.F.);+#11238=FACE_BOUND('',#11239,.F.);+#11239=EDGE_LOOP('',(#11240,#4153,#11243,#11244));+#11240=ORIENTED_EDGE('',*,*,#11241,.T.);+#11241=EDGE_CURVE('',#4082,#4150,#11242,.T.);+#11242=LINE('',#4083,#451);+#11243=ORIENTED_EDGE('',*,*,#11231,.F.);+#11244=ORIENTED_EDGE('',*,*,#4086,.F.);+#11245=PLANE('',#11246);+#11246=AXIS2_PLACEMENT_3D('',#4083,#408,#13);+#11247=ADVANCED_FACE('',(#11248),#11255,.F.);+#11248=FACE_BOUND('',#11249,.F.);+#11249=EDGE_LOOP('',(#11250,#4148,#11253,#11254));+#11250=ORIENTED_EDGE('',*,*,#11251,.T.);+#11251=EDGE_CURVE('',#4075,#4143,#11252,.T.);+#11252=LINE('',#4076,#451);+#11253=ORIENTED_EDGE('',*,*,#11241,.F.);+#11254=ORIENTED_EDGE('',*,*,#4081,.F.);+#11255=PLANE('',#11256);+#11256=AXIS2_PLACEMENT_3D('',#4076,#13,#2378);+#11257=ADVANCED_FACE('',(#11258),#11265,.T.);+#11258=FACE_BOUND('',#11259,.F.);+#11259=EDGE_LOOP('',(#11260,#4141,#11263,#11264));+#11260=ORIENTED_EDGE('',*,*,#11261,.T.);+#11261=EDGE_CURVE('',#4070,#4138,#11262,.T.);+#11262=LINE('',#4071,#451);+#11263=ORIENTED_EDGE('',*,*,#11251,.F.);+#11264=ORIENTED_EDGE('',*,*,#4074,.F.);+#11265=CYLINDRICAL_SURFACE('',#11266,0.2);+#11266=AXIS2_PLACEMENT_3D('',#4079,#2386,#2402);+#11267=ADVANCED_FACE('',(#11268),#11275,.F.);+#11268=FACE_BOUND('',#11269,.F.);+#11269=EDGE_LOOP('',(#11270,#4136,#11273,#11274));+#11270=ORIENTED_EDGE('',*,*,#11271,.T.);+#11271=EDGE_CURVE('',#4063,#4131,#11272,.T.);+#11272=LINE('',#4064,#451);+#11273=ORIENTED_EDGE('',*,*,#11261,.F.);+#11274=ORIENTED_EDGE('',*,*,#4069,.F.);+#11275=PLANE('',#11276);+#11276=AXIS2_PLACEMENT_3D('',#4064,#10319,#2394);+#11277=ADVANCED_FACE('',(#11278),#11285,.F.);+#11278=FACE_BOUND('',#11279,.F.);+#11279=EDGE_LOOP('',(#11280,#4129,#11283,#11284));+#11280=ORIENTED_EDGE('',*,*,#11281,.T.);+#11281=EDGE_CURVE('',#4057,#4125,#11282,.T.);+#11282=LINE('',#4058,#451);+#11283=ORIENTED_EDGE('',*,*,#11271,.F.);+#11284=ORIENTED_EDGE('',*,*,#4062,.F.);+#11285=CYLINDRICAL_SURFACE('',#4066,0.1);+#11286=ADVANCED_FACE('',(#11287),#11292,.F.);+#11287=FACE_BOUND('',#11288,.F.);+#11288=EDGE_LOOP('',(#11289,#11290,#4123,#11291));+#11289=ORIENTED_EDGE('',*,*,#4056,.F.);+#11290=ORIENTED_EDGE('',*,*,#10211,.T.);+#11291=ORIENTED_EDGE('',*,*,#11281,.F.);+#11292=PLANE('',#11293);+#11293=AXIS2_PLACEMENT_3D('',#4060,#13,#2378);+#11294=ADVANCED_FACE('',(#11295),#11302,.F.);+#11295=FACE_BOUND('',#11296,.F.);+#11296=EDGE_LOOP('',(#11297,#4321,#11300,#11301));+#11297=ORIENTED_EDGE('',*,*,#11298,.T.);+#11298=EDGE_CURVE('',#4249,#4317,#11299,.T.);+#11299=LINE('',#4250,#451);+#11300=ORIENTED_EDGE('',*,*,#4337,.F.);+#11301=ORIENTED_EDGE('',*,*,#4254,.F.);+#11302=PLANE('',#11303);+#11303=AXIS2_PLACEMENT_3D('',#4250,#10258,#2432);+#11304=ADVANCED_FACE('',(#11305),#11312,.F.);+#11305=FACE_BOUND('',#11306,.F.);+#11306=EDGE_LOOP('',(#11307,#4315,#11310,#11311));+#11307=ORIENTED_EDGE('',*,*,#11308,.T.);+#11308=EDGE_CURVE('',#4244,#4312,#11309,.T.);+#11309=LINE('',#4245,#451);+#11310=ORIENTED_EDGE('',*,*,#11298,.F.);+#11311=ORIENTED_EDGE('',*,*,#4248,.F.);+#11312=CYLINDRICAL_SURFACE('',#11313,1.E-01);+#11313=AXIS2_PLACEMENT_3D('',#4231,#2386,#2425);+#11314=ADVANCED_FACE('',(#11315),#11322,.F.);+#11315=FACE_BOUND('',#11316,.F.);+#11316=EDGE_LOOP('',(#11317,#4310,#11320,#11321));+#11317=ORIENTED_EDGE('',*,*,#11318,.T.);+#11318=EDGE_CURVE('',#4239,#4307,#11319,.T.);+#11319=LINE('',#4240,#451);+#11320=ORIENTED_EDGE('',*,*,#11308,.F.);+#11321=ORIENTED_EDGE('',*,*,#4243,.F.);+#11322=PLANE('',#11323);+#11323=AXIS2_PLACEMENT_3D('',#4240,#464,#408);+#11324=ADVANCED_FACE('',(#11325),#11332,.F.);+#11325=FACE_BOUND('',#11326,.F.);+#11326=EDGE_LOOP('',(#11327,#4305,#11330,#11331));+#11327=ORIENTED_EDGE('',*,*,#11328,.T.);+#11328=EDGE_CURVE('',#4234,#4302,#11329,.T.);+#11329=LINE('',#4235,#451);+#11330=ORIENTED_EDGE('',*,*,#11318,.F.);+#11331=ORIENTED_EDGE('',*,*,#4238,.F.);+#11332=PLANE('',#11333);+#11333=AXIS2_PLACEMENT_3D('',#4235,#408,#13);+#11334=ADVANCED_FACE('',(#11335),#11342,.F.);+#11335=FACE_BOUND('',#11336,.F.);+#11336=EDGE_LOOP('',(#11337,#4300,#11340,#11341));+#11337=ORIENTED_EDGE('',*,*,#11338,.T.);+#11338=EDGE_CURVE('',#4227,#4295,#11339,.T.);+#11339=LINE('',#4228,#451);+#11340=ORIENTED_EDGE('',*,*,#11328,.F.);+#11341=ORIENTED_EDGE('',*,*,#4233,.F.);+#11342=PLANE('',#11343);+#11343=AXIS2_PLACEMENT_3D('',#4228,#13,#2378);+#11344=ADVANCED_FACE('',(#11345),#11352,.T.);+#11345=FACE_BOUND('',#11346,.F.);+#11346=EDGE_LOOP('',(#11347,#4293,#11350,#11351));+#11347=ORIENTED_EDGE('',*,*,#11348,.T.);+#11348=EDGE_CURVE('',#4222,#4290,#11349,.T.);+#11349=LINE('',#4223,#451);+#11350=ORIENTED_EDGE('',*,*,#11338,.F.);+#11351=ORIENTED_EDGE('',*,*,#4226,.F.);+#11352=CYLINDRICAL_SURFACE('',#11353,0.2);+#11353=AXIS2_PLACEMENT_3D('',#4231,#2386,#2402);+#11354=ADVANCED_FACE('',(#11355),#11362,.F.);+#11355=FACE_BOUND('',#11356,.F.);+#11356=EDGE_LOOP('',(#11357,#4288,#11360,#11361));+#11357=ORIENTED_EDGE('',*,*,#11358,.T.);+#11358=EDGE_CURVE('',#4215,#4283,#11359,.T.);+#11359=LINE('',#4216,#451);+#11360=ORIENTED_EDGE('',*,*,#11348,.F.);+#11361=ORIENTED_EDGE('',*,*,#4221,.F.);+#11362=PLANE('',#11363);+#11363=AXIS2_PLACEMENT_3D('',#4216,#10319,#2394);+#11364=ADVANCED_FACE('',(#11365),#11372,.F.);+#11365=FACE_BOUND('',#11366,.F.);+#11366=EDGE_LOOP('',(#11367,#4281,#11370,#11371));+#11367=ORIENTED_EDGE('',*,*,#11368,.T.);+#11368=EDGE_CURVE('',#4209,#4277,#11369,.T.);+#11369=LINE('',#4210,#451);+#11370=ORIENTED_EDGE('',*,*,#11358,.F.);+#11371=ORIENTED_EDGE('',*,*,#4214,.F.);+#11372=CYLINDRICAL_SURFACE('',#4218,0.1);+#11373=ADVANCED_FACE('',(#11374),#11379,.F.);+#11374=FACE_BOUND('',#11375,.F.);+#11375=EDGE_LOOP('',(#11376,#11377,#4275,#11378));+#11376=ORIENTED_EDGE('',*,*,#4208,.F.);+#11377=ORIENTED_EDGE('',*,*,#10208,.T.);+#11378=ORIENTED_EDGE('',*,*,#11368,.F.);+#11379=PLANE('',#11380);+#11380=AXIS2_PLACEMENT_3D('',#4212,#13,#2378);+#11381=ADVANCED_FACE('',(#11382),#11389,.F.);+#11382=FACE_BOUND('',#11383,.F.);+#11383=EDGE_LOOP('',(#11384,#4473,#11387,#11388));+#11384=ORIENTED_EDGE('',*,*,#11385,.T.);+#11385=EDGE_CURVE('',#4401,#4469,#11386,.T.);+#11386=LINE('',#4402,#451);+#11387=ORIENTED_EDGE('',*,*,#4489,.F.);+#11388=ORIENTED_EDGE('',*,*,#4406,.F.);+#11389=PLANE('',#11390);+#11390=AXIS2_PLACEMENT_3D('',#4402,#10258,#2432);+#11391=ADVANCED_FACE('',(#11392),#11399,.F.);+#11392=FACE_BOUND('',#11393,.F.);+#11393=EDGE_LOOP('',(#11394,#4467,#11397,#11398));+#11394=ORIENTED_EDGE('',*,*,#11395,.T.);+#11395=EDGE_CURVE('',#4396,#4464,#11396,.T.);+#11396=LINE('',#4397,#451);+#11397=ORIENTED_EDGE('',*,*,#11385,.F.);+#11398=ORIENTED_EDGE('',*,*,#4400,.F.);+#11399=CYLINDRICAL_SURFACE('',#11400,1.E-01);+#11400=AXIS2_PLACEMENT_3D('',#4383,#2386,#2425);+#11401=ADVANCED_FACE('',(#11402),#11409,.F.);+#11402=FACE_BOUND('',#11403,.F.);+#11403=EDGE_LOOP('',(#11404,#4462,#11407,#11408));+#11404=ORIENTED_EDGE('',*,*,#11405,.T.);+#11405=EDGE_CURVE('',#4391,#4459,#11406,.T.);+#11406=LINE('',#4392,#451);+#11407=ORIENTED_EDGE('',*,*,#11395,.F.);+#11408=ORIENTED_EDGE('',*,*,#4395,.F.);+#11409=PLANE('',#11410);+#11410=AXIS2_PLACEMENT_3D('',#4392,#464,#408);+#11411=ADVANCED_FACE('',(#11412),#11419,.F.);+#11412=FACE_BOUND('',#11413,.F.);+#11413=EDGE_LOOP('',(#11414,#4457,#11417,#11418));+#11414=ORIENTED_EDGE('',*,*,#11415,.T.);+#11415=EDGE_CURVE('',#4386,#4454,#11416,.T.);+#11416=LINE('',#4387,#451);+#11417=ORIENTED_EDGE('',*,*,#11405,.F.);+#11418=ORIENTED_EDGE('',*,*,#4390,.F.);+#11419=PLANE('',#11420);+#11420=AXIS2_PLACEMENT_3D('',#4387,#408,#13);+#11421=ADVANCED_FACE('',(#11422),#11429,.F.);+#11422=FACE_BOUND('',#11423,.F.);+#11423=EDGE_LOOP('',(#11424,#4452,#11427,#11428));+#11424=ORIENTED_EDGE('',*,*,#11425,.T.);+#11425=EDGE_CURVE('',#4379,#4447,#11426,.T.);+#11426=LINE('',#4380,#451);+#11427=ORIENTED_EDGE('',*,*,#11415,.F.);+#11428=ORIENTED_EDGE('',*,*,#4385,.F.);+#11429=PLANE('',#11430);+#11430=AXIS2_PLACEMENT_3D('',#4380,#13,#2378);+#11431=ADVANCED_FACE('',(#11432),#11439,.T.);+#11432=FACE_BOUND('',#11433,.F.);+#11433=EDGE_LOOP('',(#11434,#4445,#11437,#11438));+#11434=ORIENTED_EDGE('',*,*,#11435,.T.);+#11435=EDGE_CURVE('',#4374,#4442,#11436,.T.);+#11436=LINE('',#4375,#451);+#11437=ORIENTED_EDGE('',*,*,#11425,.F.);+#11438=ORIENTED_EDGE('',*,*,#4378,.F.);+#11439=CYLINDRICAL_SURFACE('',#11440,0.2);+#11440=AXIS2_PLACEMENT_3D('',#4383,#2386,#2402);+#11441=ADVANCED_FACE('',(#11442),#11449,.F.);+#11442=FACE_BOUND('',#11443,.F.);+#11443=EDGE_LOOP('',(#11444,#4440,#11447,#11448));+#11444=ORIENTED_EDGE('',*,*,#11445,.T.);+#11445=EDGE_CURVE('',#4367,#4435,#11446,.T.);+#11446=LINE('',#4368,#451);+#11447=ORIENTED_EDGE('',*,*,#11435,.F.);+#11448=ORIENTED_EDGE('',*,*,#4373,.F.);+#11449=PLANE('',#11450);+#11450=AXIS2_PLACEMENT_3D('',#4368,#10319,#2394);+#11451=ADVANCED_FACE('',(#11452),#11459,.F.);+#11452=FACE_BOUND('',#11453,.F.);+#11453=EDGE_LOOP('',(#11454,#4433,#11457,#11458));+#11454=ORIENTED_EDGE('',*,*,#11455,.T.);+#11455=EDGE_CURVE('',#4361,#4429,#11456,.T.);+#11456=LINE('',#4362,#451);+#11457=ORIENTED_EDGE('',*,*,#11445,.F.);+#11458=ORIENTED_EDGE('',*,*,#4366,.F.);+#11459=CYLINDRICAL_SURFACE('',#4370,0.1);+#11460=ADVANCED_FACE('',(#11461),#11466,.F.);+#11461=FACE_BOUND('',#11462,.F.);+#11462=EDGE_LOOP('',(#11463,#11464,#4427,#11465));+#11463=ORIENTED_EDGE('',*,*,#4360,.F.);+#11464=ORIENTED_EDGE('',*,*,#10205,.T.);+#11465=ORIENTED_EDGE('',*,*,#11455,.F.);+#11466=PLANE('',#11467);+#11467=AXIS2_PLACEMENT_3D('',#4364,#13,#2378);+#11468=ADVANCED_FACE('',(#11469),#11476,.F.);+#11469=FACE_BOUND('',#11470,.F.);+#11470=EDGE_LOOP('',(#11471,#4625,#11474,#11475));+#11471=ORIENTED_EDGE('',*,*,#11472,.T.);+#11472=EDGE_CURVE('',#4553,#4621,#11473,.T.);+#11473=LINE('',#4554,#451);+#11474=ORIENTED_EDGE('',*,*,#4641,.F.);+#11475=ORIENTED_EDGE('',*,*,#4558,.F.);+#11476=PLANE('',#11477);+#11477=AXIS2_PLACEMENT_3D('',#4554,#10258,#2432);+#11478=ADVANCED_FACE('',(#11479),#11486,.F.);+#11479=FACE_BOUND('',#11480,.F.);+#11480=EDGE_LOOP('',(#11481,#4619,#11484,#11485));+#11481=ORIENTED_EDGE('',*,*,#11482,.T.);+#11482=EDGE_CURVE('',#4548,#4616,#11483,.T.);+#11483=LINE('',#4549,#451);+#11484=ORIENTED_EDGE('',*,*,#11472,.F.);+#11485=ORIENTED_EDGE('',*,*,#4552,.F.);+#11486=CYLINDRICAL_SURFACE('',#11487,1.E-01);+#11487=AXIS2_PLACEMENT_3D('',#4535,#2386,#2425);+#11488=ADVANCED_FACE('',(#11489),#11496,.F.);+#11489=FACE_BOUND('',#11490,.F.);+#11490=EDGE_LOOP('',(#11491,#4614,#11494,#11495));+#11491=ORIENTED_EDGE('',*,*,#11492,.T.);+#11492=EDGE_CURVE('',#4543,#4611,#11493,.T.);+#11493=LINE('',#4544,#451);+#11494=ORIENTED_EDGE('',*,*,#11482,.F.);+#11495=ORIENTED_EDGE('',*,*,#4547,.F.);+#11496=PLANE('',#11497);+#11497=AXIS2_PLACEMENT_3D('',#4544,#464,#408);+#11498=ADVANCED_FACE('',(#11499),#11506,.F.);+#11499=FACE_BOUND('',#11500,.F.);+#11500=EDGE_LOOP('',(#11501,#4609,#11504,#11505));+#11501=ORIENTED_EDGE('',*,*,#11502,.T.);+#11502=EDGE_CURVE('',#4538,#4606,#11503,.T.);+#11503=LINE('',#4539,#451);+#11504=ORIENTED_EDGE('',*,*,#11492,.F.);+#11505=ORIENTED_EDGE('',*,*,#4542,.F.);+#11506=PLANE('',#11507);+#11507=AXIS2_PLACEMENT_3D('',#4539,#408,#13);+#11508=ADVANCED_FACE('',(#11509),#11516,.F.);+#11509=FACE_BOUND('',#11510,.F.);+#11510=EDGE_LOOP('',(#11511,#4604,#11514,#11515));+#11511=ORIENTED_EDGE('',*,*,#11512,.T.);+#11512=EDGE_CURVE('',#4531,#4599,#11513,.T.);+#11513=LINE('',#4532,#451);+#11514=ORIENTED_EDGE('',*,*,#11502,.F.);+#11515=ORIENTED_EDGE('',*,*,#4537,.F.);+#11516=PLANE('',#11517);+#11517=AXIS2_PLACEMENT_3D('',#4532,#13,#2378);+#11518=ADVANCED_FACE('',(#11519),#11526,.T.);+#11519=FACE_BOUND('',#11520,.F.);+#11520=EDGE_LOOP('',(#11521,#4597,#11524,#11525));+#11521=ORIENTED_EDGE('',*,*,#11522,.T.);+#11522=EDGE_CURVE('',#4526,#4594,#11523,.T.);+#11523=LINE('',#4527,#451);+#11524=ORIENTED_EDGE('',*,*,#11512,.F.);+#11525=ORIENTED_EDGE('',*,*,#4530,.F.);+#11526=CYLINDRICAL_SURFACE('',#11527,0.2);+#11527=AXIS2_PLACEMENT_3D('',#4535,#2386,#2402);+#11528=ADVANCED_FACE('',(#11529),#11536,.F.);+#11529=FACE_BOUND('',#11530,.F.);+#11530=EDGE_LOOP('',(#11531,#4592,#11534,#11535));+#11531=ORIENTED_EDGE('',*,*,#11532,.T.);+#11532=EDGE_CURVE('',#4519,#4587,#11533,.T.);+#11533=LINE('',#4520,#451);+#11534=ORIENTED_EDGE('',*,*,#11522,.F.);+#11535=ORIENTED_EDGE('',*,*,#4525,.F.);+#11536=PLANE('',#11537);+#11537=AXIS2_PLACEMENT_3D('',#4520,#10319,#2394);+#11538=ADVANCED_FACE('',(#11539),#11546,.F.);+#11539=FACE_BOUND('',#11540,.F.);+#11540=EDGE_LOOP('',(#11541,#4585,#11544,#11545));+#11541=ORIENTED_EDGE('',*,*,#11542,.T.);+#11542=EDGE_CURVE('',#4513,#4581,#11543,.T.);+#11543=LINE('',#4514,#451);+#11544=ORIENTED_EDGE('',*,*,#11532,.F.);+#11545=ORIENTED_EDGE('',*,*,#4518,.F.);+#11546=CYLINDRICAL_SURFACE('',#4522,0.1);+#11547=ADVANCED_FACE('',(#11548),#11553,.F.);+#11548=FACE_BOUND('',#11549,.F.);+#11549=EDGE_LOOP('',(#11550,#11551,#4579,#11552));+#11550=ORIENTED_EDGE('',*,*,#4512,.F.);+#11551=ORIENTED_EDGE('',*,*,#10202,.T.);+#11552=ORIENTED_EDGE('',*,*,#11542,.F.);+#11553=PLANE('',#11554);+#11554=AXIS2_PLACEMENT_3D('',#4516,#13,#2378);+#11555=ADVANCED_FACE('',(#11556),#11563,.F.);+#11556=FACE_BOUND('',#11557,.F.);+#11557=EDGE_LOOP('',(#11558,#4777,#11561,#11562));+#11558=ORIENTED_EDGE('',*,*,#11559,.T.);+#11559=EDGE_CURVE('',#4705,#4773,#11560,.T.);+#11560=LINE('',#4706,#451);+#11561=ORIENTED_EDGE('',*,*,#4793,.F.);+#11562=ORIENTED_EDGE('',*,*,#4710,.F.);+#11563=PLANE('',#11564);+#11564=AXIS2_PLACEMENT_3D('',#4706,#10258,#2432);+#11565=ADVANCED_FACE('',(#11566),#11573,.F.);+#11566=FACE_BOUND('',#11567,.F.);+#11567=EDGE_LOOP('',(#11568,#4771,#11571,#11572));+#11568=ORIENTED_EDGE('',*,*,#11569,.T.);+#11569=EDGE_CURVE('',#4700,#4768,#11570,.T.);+#11570=LINE('',#4701,#451);+#11571=ORIENTED_EDGE('',*,*,#11559,.F.);+#11572=ORIENTED_EDGE('',*,*,#4704,.F.);+#11573=CYLINDRICAL_SURFACE('',#11574,1.E-01);+#11574=AXIS2_PLACEMENT_3D('',#4687,#2386,#2425);+#11575=ADVANCED_FACE('',(#11576),#11583,.F.);+#11576=FACE_BOUND('',#11577,.F.);+#11577=EDGE_LOOP('',(#11578,#4766,#11581,#11582));+#11578=ORIENTED_EDGE('',*,*,#11579,.T.);+#11579=EDGE_CURVE('',#4695,#4763,#11580,.T.);+#11580=LINE('',#4696,#451);+#11581=ORIENTED_EDGE('',*,*,#11569,.F.);+#11582=ORIENTED_EDGE('',*,*,#4699,.F.);+#11583=PLANE('',#11584);+#11584=AXIS2_PLACEMENT_3D('',#4696,#464,#408);+#11585=ADVANCED_FACE('',(#11586),#11593,.F.);+#11586=FACE_BOUND('',#11587,.F.);+#11587=EDGE_LOOP('',(#11588,#4761,#11591,#11592));+#11588=ORIENTED_EDGE('',*,*,#11589,.T.);+#11589=EDGE_CURVE('',#4690,#4758,#11590,.T.);+#11590=LINE('',#4691,#451);+#11591=ORIENTED_EDGE('',*,*,#11579,.F.);+#11592=ORIENTED_EDGE('',*,*,#4694,.F.);+#11593=PLANE('',#11594);+#11594=AXIS2_PLACEMENT_3D('',#4691,#408,#13);+#11595=ADVANCED_FACE('',(#11596),#11603,.F.);+#11596=FACE_BOUND('',#11597,.F.);+#11597=EDGE_LOOP('',(#11598,#4756,#11601,#11602));+#11598=ORIENTED_EDGE('',*,*,#11599,.T.);+#11599=EDGE_CURVE('',#4683,#4751,#11600,.T.);+#11600=LINE('',#4684,#451);+#11601=ORIENTED_EDGE('',*,*,#11589,.F.);+#11602=ORIENTED_EDGE('',*,*,#4689,.F.);+#11603=PLANE('',#11604);+#11604=AXIS2_PLACEMENT_3D('',#4684,#13,#2378);+#11605=ADVANCED_FACE('',(#11606),#11613,.T.);+#11606=FACE_BOUND('',#11607,.F.);+#11607=EDGE_LOOP('',(#11608,#4749,#11611,#11612));+#11608=ORIENTED_EDGE('',*,*,#11609,.T.);+#11609=EDGE_CURVE('',#4678,#4746,#11610,.T.);+#11610=LINE('',#4679,#451);+#11611=ORIENTED_EDGE('',*,*,#11599,.F.);+#11612=ORIENTED_EDGE('',*,*,#4682,.F.);+#11613=CYLINDRICAL_SURFACE('',#11614,0.2);+#11614=AXIS2_PLACEMENT_3D('',#4687,#2386,#2402);+#11615=ADVANCED_FACE('',(#11616),#11623,.F.);+#11616=FACE_BOUND('',#11617,.F.);+#11617=EDGE_LOOP('',(#11618,#4744,#11621,#11622));+#11618=ORIENTED_EDGE('',*,*,#11619,.T.);+#11619=EDGE_CURVE('',#4671,#4739,#11620,.T.);+#11620=LINE('',#4672,#451);+#11621=ORIENTED_EDGE('',*,*,#11609,.F.);+#11622=ORIENTED_EDGE('',*,*,#4677,.F.);+#11623=PLANE('',#11624);+#11624=AXIS2_PLACEMENT_3D('',#4672,#10319,#2394);+#11625=ADVANCED_FACE('',(#11626),#11633,.F.);+#11626=FACE_BOUND('',#11627,.F.);+#11627=EDGE_LOOP('',(#11628,#4737,#11631,#11632));+#11628=ORIENTED_EDGE('',*,*,#11629,.T.);+#11629=EDGE_CURVE('',#4665,#4733,#11630,.T.);+#11630=LINE('',#4666,#451);+#11631=ORIENTED_EDGE('',*,*,#11619,.F.);+#11632=ORIENTED_EDGE('',*,*,#4670,.F.);+#11633=CYLINDRICAL_SURFACE('',#4674,0.1);+#11634=ADVANCED_FACE('',(#11635),#11640,.F.);+#11635=FACE_BOUND('',#11636,.F.);+#11636=EDGE_LOOP('',(#11637,#11638,#4731,#11639));+#11637=ORIENTED_EDGE('',*,*,#4664,.F.);+#11638=ORIENTED_EDGE('',*,*,#10199,.T.);+#11639=ORIENTED_EDGE('',*,*,#11629,.F.);+#11640=PLANE('',#11641);+#11641=AXIS2_PLACEMENT_3D('',#4668,#13,#2378);+#11642=ADVANCED_FACE('',(#11643),#11650,.F.);+#11643=FACE_BOUND('',#11644,.F.);+#11644=EDGE_LOOP('',(#11645,#4929,#11648,#11649));+#11645=ORIENTED_EDGE('',*,*,#11646,.T.);+#11646=EDGE_CURVE('',#4857,#4925,#11647,.T.);+#11647=LINE('',#4858,#451);+#11648=ORIENTED_EDGE('',*,*,#4945,.F.);+#11649=ORIENTED_EDGE('',*,*,#4862,.F.);+#11650=PLANE('',#11651);+#11651=AXIS2_PLACEMENT_3D('',#4858,#10258,#2432);+#11652=ADVANCED_FACE('',(#11653),#11660,.F.);+#11653=FACE_BOUND('',#11654,.F.);+#11654=EDGE_LOOP('',(#11655,#4923,#11658,#11659));+#11655=ORIENTED_EDGE('',*,*,#11656,.T.);+#11656=EDGE_CURVE('',#4852,#4920,#11657,.T.);+#11657=LINE('',#4853,#451);+#11658=ORIENTED_EDGE('',*,*,#11646,.F.);+#11659=ORIENTED_EDGE('',*,*,#4856,.F.);+#11660=CYLINDRICAL_SURFACE('',#11661,1.E-01);+#11661=AXIS2_PLACEMENT_3D('',#4839,#2386,#2425);+#11662=ADVANCED_FACE('',(#11663),#11670,.F.);+#11663=FACE_BOUND('',#11664,.F.);+#11664=EDGE_LOOP('',(#11665,#4918,#11668,#11669));+#11665=ORIENTED_EDGE('',*,*,#11666,.T.);+#11666=EDGE_CURVE('',#4847,#4915,#11667,.T.);+#11667=LINE('',#4848,#451);+#11668=ORIENTED_EDGE('',*,*,#11656,.F.);+#11669=ORIENTED_EDGE('',*,*,#4851,.F.);+#11670=PLANE('',#11671);+#11671=AXIS2_PLACEMENT_3D('',#4848,#464,#408);+#11672=ADVANCED_FACE('',(#11673),#11680,.F.);+#11673=FACE_BOUND('',#11674,.F.);+#11674=EDGE_LOOP('',(#11675,#4913,#11678,#11679));+#11675=ORIENTED_EDGE('',*,*,#11676,.T.);+#11676=EDGE_CURVE('',#4842,#4910,#11677,.T.);+#11677=LINE('',#4843,#451);+#11678=ORIENTED_EDGE('',*,*,#11666,.F.);+#11679=ORIENTED_EDGE('',*,*,#4846,.F.);+#11680=PLANE('',#11681);+#11681=AXIS2_PLACEMENT_3D('',#4843,#408,#13);+#11682=ADVANCED_FACE('',(#11683),#11690,.F.);+#11683=FACE_BOUND('',#11684,.F.);+#11684=EDGE_LOOP('',(#11685,#4908,#11688,#11689));+#11685=ORIENTED_EDGE('',*,*,#11686,.T.);+#11686=EDGE_CURVE('',#4835,#4903,#11687,.T.);+#11687=LINE('',#4836,#451);+#11688=ORIENTED_EDGE('',*,*,#11676,.F.);+#11689=ORIENTED_EDGE('',*,*,#4841,.F.);+#11690=PLANE('',#11691);+#11691=AXIS2_PLACEMENT_3D('',#4836,#13,#2378);+#11692=ADVANCED_FACE('',(#11693),#11700,.T.);+#11693=FACE_BOUND('',#11694,.F.);+#11694=EDGE_LOOP('',(#11695,#4901,#11698,#11699));+#11695=ORIENTED_EDGE('',*,*,#11696,.T.);+#11696=EDGE_CURVE('',#4830,#4898,#11697,.T.);+#11697=LINE('',#4831,#451);+#11698=ORIENTED_EDGE('',*,*,#11686,.F.);+#11699=ORIENTED_EDGE('',*,*,#4834,.F.);+#11700=CYLINDRICAL_SURFACE('',#11701,0.2);+#11701=AXIS2_PLACEMENT_3D('',#4839,#2386,#2402);+#11702=ADVANCED_FACE('',(#11703),#11710,.F.);+#11703=FACE_BOUND('',#11704,.F.);+#11704=EDGE_LOOP('',(#11705,#4896,#11708,#11709));+#11705=ORIENTED_EDGE('',*,*,#11706,.T.);+#11706=EDGE_CURVE('',#4823,#4891,#11707,.T.);+#11707=LINE('',#4824,#451);+#11708=ORIENTED_EDGE('',*,*,#11696,.F.);+#11709=ORIENTED_EDGE('',*,*,#4829,.F.);+#11710=PLANE('',#11711);+#11711=AXIS2_PLACEMENT_3D('',#4824,#10319,#2394);+#11712=ADVANCED_FACE('',(#11713),#11720,.F.);+#11713=FACE_BOUND('',#11714,.F.);+#11714=EDGE_LOOP('',(#11715,#4889,#11718,#11719));+#11715=ORIENTED_EDGE('',*,*,#11716,.T.);+#11716=EDGE_CURVE('',#4817,#4885,#11717,.T.);+#11717=LINE('',#4818,#451);+#11718=ORIENTED_EDGE('',*,*,#11706,.F.);+#11719=ORIENTED_EDGE('',*,*,#4822,.F.);+#11720=CYLINDRICAL_SURFACE('',#4826,0.1);+#11721=ADVANCED_FACE('',(#11722),#11727,.F.);+#11722=FACE_BOUND('',#11723,.F.);+#11723=EDGE_LOOP('',(#11724,#11725,#4883,#11726));+#11724=ORIENTED_EDGE('',*,*,#4816,.F.);+#11725=ORIENTED_EDGE('',*,*,#10196,.T.);+#11726=ORIENTED_EDGE('',*,*,#11716,.F.);+#11727=PLANE('',#11728);+#11728=AXIS2_PLACEMENT_3D('',#4820,#13,#2378);+#11729=ADVANCED_FACE('',(#11730),#11737,.F.);+#11730=FACE_BOUND('',#11731,.F.);+#11731=EDGE_LOOP('',(#11732,#5081,#11735,#11736));+#11732=ORIENTED_EDGE('',*,*,#11733,.T.);+#11733=EDGE_CURVE('',#5009,#5077,#11734,.T.);+#11734=LINE('',#5010,#451);+#11735=ORIENTED_EDGE('',*,*,#5097,.F.);+#11736=ORIENTED_EDGE('',*,*,#5014,.F.);+#11737=PLANE('',#11738);+#11738=AXIS2_PLACEMENT_3D('',#5010,#10258,#2432);+#11739=ADVANCED_FACE('',(#11740),#11747,.F.);+#11740=FACE_BOUND('',#11741,.F.);+#11741=EDGE_LOOP('',(#11742,#5075,#11745,#11746));+#11742=ORIENTED_EDGE('',*,*,#11743,.T.);+#11743=EDGE_CURVE('',#5004,#5072,#11744,.T.);+#11744=LINE('',#5005,#451);+#11745=ORIENTED_EDGE('',*,*,#11733,.F.);+#11746=ORIENTED_EDGE('',*,*,#5008,.F.);+#11747=CYLINDRICAL_SURFACE('',#11748,1.E-01);+#11748=AXIS2_PLACEMENT_3D('',#4991,#2386,#2425);+#11749=ADVANCED_FACE('',(#11750),#11757,.F.);+#11750=FACE_BOUND('',#11751,.F.);+#11751=EDGE_LOOP('',(#11752,#5070,#11755,#11756));+#11752=ORIENTED_EDGE('',*,*,#11753,.T.);+#11753=EDGE_CURVE('',#4999,#5067,#11754,.T.);+#11754=LINE('',#5000,#451);+#11755=ORIENTED_EDGE('',*,*,#11743,.F.);+#11756=ORIENTED_EDGE('',*,*,#5003,.F.);+#11757=PLANE('',#11758);+#11758=AXIS2_PLACEMENT_3D('',#5000,#464,#408);+#11759=ADVANCED_FACE('',(#11760),#11767,.F.);+#11760=FACE_BOUND('',#11761,.F.);+#11761=EDGE_LOOP('',(#11762,#5065,#11765,#11766));+#11762=ORIENTED_EDGE('',*,*,#11763,.T.);+#11763=EDGE_CURVE('',#4994,#5062,#11764,.T.);+#11764=LINE('',#4995,#451);+#11765=ORIENTED_EDGE('',*,*,#11753,.F.);+#11766=ORIENTED_EDGE('',*,*,#4998,.F.);+#11767=PLANE('',#11768);+#11768=AXIS2_PLACEMENT_3D('',#4995,#408,#13);+#11769=ADVANCED_FACE('',(#11770),#11777,.F.);+#11770=FACE_BOUND('',#11771,.F.);+#11771=EDGE_LOOP('',(#11772,#5060,#11775,#11776));+#11772=ORIENTED_EDGE('',*,*,#11773,.T.);+#11773=EDGE_CURVE('',#4987,#5055,#11774,.T.);+#11774=LINE('',#4988,#451);+#11775=ORIENTED_EDGE('',*,*,#11763,.F.);+#11776=ORIENTED_EDGE('',*,*,#4993,.F.);+#11777=PLANE('',#11778);+#11778=AXIS2_PLACEMENT_3D('',#4988,#13,#2378);+#11779=ADVANCED_FACE('',(#11780),#11787,.T.);+#11780=FACE_BOUND('',#11781,.F.);+#11781=EDGE_LOOP('',(#11782,#5053,#11785,#11786));+#11782=ORIENTED_EDGE('',*,*,#11783,.T.);+#11783=EDGE_CURVE('',#4982,#5050,#11784,.T.);+#11784=LINE('',#4983,#451);+#11785=ORIENTED_EDGE('',*,*,#11773,.F.);+#11786=ORIENTED_EDGE('',*,*,#4986,.F.);+#11787=CYLINDRICAL_SURFACE('',#11788,0.2);+#11788=AXIS2_PLACEMENT_3D('',#4991,#2386,#2402);+#11789=ADVANCED_FACE('',(#11790),#11797,.F.);+#11790=FACE_BOUND('',#11791,.F.);+#11791=EDGE_LOOP('',(#11792,#5048,#11795,#11796));+#11792=ORIENTED_EDGE('',*,*,#11793,.T.);+#11793=EDGE_CURVE('',#4975,#5043,#11794,.T.);+#11794=LINE('',#4976,#451);+#11795=ORIENTED_EDGE('',*,*,#11783,.F.);+#11796=ORIENTED_EDGE('',*,*,#4981,.F.);+#11797=PLANE('',#11798);+#11798=AXIS2_PLACEMENT_3D('',#4976,#10319,#2394);+#11799=ADVANCED_FACE('',(#11800),#11807,.F.);+#11800=FACE_BOUND('',#11801,.F.);+#11801=EDGE_LOOP('',(#11802,#5041,#11805,#11806));+#11802=ORIENTED_EDGE('',*,*,#11803,.T.);+#11803=EDGE_CURVE('',#4969,#5037,#11804,.T.);+#11804=LINE('',#4970,#451);+#11805=ORIENTED_EDGE('',*,*,#11793,.F.);+#11806=ORIENTED_EDGE('',*,*,#4974,.F.);+#11807=CYLINDRICAL_SURFACE('',#4978,0.1);+#11808=ADVANCED_FACE('',(#11809),#11814,.F.);+#11809=FACE_BOUND('',#11810,.F.);+#11810=EDGE_LOOP('',(#11811,#11812,#5035,#11813));+#11811=ORIENTED_EDGE('',*,*,#4968,.F.);+#11812=ORIENTED_EDGE('',*,*,#10193,.T.);+#11813=ORIENTED_EDGE('',*,*,#11803,.F.);+#11814=PLANE('',#11815);+#11815=AXIS2_PLACEMENT_3D('',#4972,#13,#2378);+#11816=ADVANCED_FACE('',(#11817),#11824,.F.);+#11817=FACE_BOUND('',#11818,.F.);+#11818=EDGE_LOOP('',(#11819,#5233,#11822,#11823));+#11819=ORIENTED_EDGE('',*,*,#11820,.T.);+#11820=EDGE_CURVE('',#5161,#5229,#11821,.T.);+#11821=LINE('',#5162,#451);+#11822=ORIENTED_EDGE('',*,*,#5249,.F.);+#11823=ORIENTED_EDGE('',*,*,#5166,.F.);+#11824=PLANE('',#11825);+#11825=AXIS2_PLACEMENT_3D('',#5162,#10258,#2432);+#11826=ADVANCED_FACE('',(#11827),#11834,.F.);+#11827=FACE_BOUND('',#11828,.F.);+#11828=EDGE_LOOP('',(#11829,#5227,#11832,#11833));+#11829=ORIENTED_EDGE('',*,*,#11830,.T.);+#11830=EDGE_CURVE('',#5156,#5224,#11831,.T.);+#11831=LINE('',#5157,#451);+#11832=ORIENTED_EDGE('',*,*,#11820,.F.);+#11833=ORIENTED_EDGE('',*,*,#5160,.F.);+#11834=CYLINDRICAL_SURFACE('',#11835,1.E-01);+#11835=AXIS2_PLACEMENT_3D('',#5143,#2386,#2425);+#11836=ADVANCED_FACE('',(#11837),#11844,.F.);+#11837=FACE_BOUND('',#11838,.F.);+#11838=EDGE_LOOP('',(#11839,#5222,#11842,#11843));+#11839=ORIENTED_EDGE('',*,*,#11840,.T.);+#11840=EDGE_CURVE('',#5151,#5219,#11841,.T.);+#11841=LINE('',#5152,#451);+#11842=ORIENTED_EDGE('',*,*,#11830,.F.);+#11843=ORIENTED_EDGE('',*,*,#5155,.F.);+#11844=PLANE('',#11845);+#11845=AXIS2_PLACEMENT_3D('',#5152,#464,#408);+#11846=ADVANCED_FACE('',(#11847),#11854,.F.);+#11847=FACE_BOUND('',#11848,.F.);+#11848=EDGE_LOOP('',(#11849,#5217,#11852,#11853));+#11849=ORIENTED_EDGE('',*,*,#11850,.T.);+#11850=EDGE_CURVE('',#5146,#5214,#11851,.T.);+#11851=LINE('',#5147,#451);+#11852=ORIENTED_EDGE('',*,*,#11840,.F.);+#11853=ORIENTED_EDGE('',*,*,#5150,.F.);+#11854=PLANE('',#11855);+#11855=AXIS2_PLACEMENT_3D('',#5147,#408,#13);+#11856=ADVANCED_FACE('',(#11857),#11864,.F.);+#11857=FACE_BOUND('',#11858,.F.);+#11858=EDGE_LOOP('',(#11859,#5212,#11862,#11863));+#11859=ORIENTED_EDGE('',*,*,#11860,.T.);+#11860=EDGE_CURVE('',#5139,#5207,#11861,.T.);+#11861=LINE('',#5140,#451);+#11862=ORIENTED_EDGE('',*,*,#11850,.F.);+#11863=ORIENTED_EDGE('',*,*,#5145,.F.);+#11864=PLANE('',#11865);+#11865=AXIS2_PLACEMENT_3D('',#5140,#13,#2378);+#11866=ADVANCED_FACE('',(#11867),#11874,.T.);+#11867=FACE_BOUND('',#11868,.F.);+#11868=EDGE_LOOP('',(#11869,#5205,#11872,#11873));+#11869=ORIENTED_EDGE('',*,*,#11870,.T.);+#11870=EDGE_CURVE('',#5134,#5202,#11871,.T.);+#11871=LINE('',#5135,#451);+#11872=ORIENTED_EDGE('',*,*,#11860,.F.);+#11873=ORIENTED_EDGE('',*,*,#5138,.F.);+#11874=CYLINDRICAL_SURFACE('',#11875,0.2);+#11875=AXIS2_PLACEMENT_3D('',#5143,#2386,#2402);+#11876=ADVANCED_FACE('',(#11877),#11884,.F.);+#11877=FACE_BOUND('',#11878,.F.);+#11878=EDGE_LOOP('',(#11879,#5200,#11882,#11883));+#11879=ORIENTED_EDGE('',*,*,#11880,.T.);+#11880=EDGE_CURVE('',#5127,#5195,#11881,.T.);+#11881=LINE('',#5128,#451);+#11882=ORIENTED_EDGE('',*,*,#11870,.F.);+#11883=ORIENTED_EDGE('',*,*,#5133,.F.);+#11884=PLANE('',#11885);+#11885=AXIS2_PLACEMENT_3D('',#5128,#10319,#2394);+#11886=ADVANCED_FACE('',(#11887),#11894,.F.);+#11887=FACE_BOUND('',#11888,.F.);+#11888=EDGE_LOOP('',(#11889,#5193,#11892,#11893));+#11889=ORIENTED_EDGE('',*,*,#11890,.T.);+#11890=EDGE_CURVE('',#5121,#5189,#11891,.T.);+#11891=LINE('',#5122,#451);+#11892=ORIENTED_EDGE('',*,*,#11880,.F.);+#11893=ORIENTED_EDGE('',*,*,#5126,.F.);+#11894=CYLINDRICAL_SURFACE('',#5130,0.1);+#11895=ADVANCED_FACE('',(#11896),#11901,.F.);+#11896=FACE_BOUND('',#11897,.F.);+#11897=EDGE_LOOP('',(#11898,#11899,#5187,#11900));+#11898=ORIENTED_EDGE('',*,*,#5120,.F.);+#11899=ORIENTED_EDGE('',*,*,#10190,.T.);+#11900=ORIENTED_EDGE('',*,*,#11890,.F.);+#11901=PLANE('',#11902);+#11902=AXIS2_PLACEMENT_3D('',#5124,#13,#2378);+#11903=ADVANCED_FACE('',(#11904),#11911,.F.);+#11904=FACE_BOUND('',#11905,.F.);+#11905=EDGE_LOOP('',(#11906,#5385,#11909,#11910));+#11906=ORIENTED_EDGE('',*,*,#11907,.T.);+#11907=EDGE_CURVE('',#5313,#5381,#11908,.T.);+#11908=LINE('',#5314,#451);+#11909=ORIENTED_EDGE('',*,*,#5401,.F.);+#11910=ORIENTED_EDGE('',*,*,#5318,.F.);+#11911=PLANE('',#11912);+#11912=AXIS2_PLACEMENT_3D('',#5314,#10258,#2432);+#11913=ADVANCED_FACE('',(#11914),#11921,.F.);+#11914=FACE_BOUND('',#11915,.F.);+#11915=EDGE_LOOP('',(#11916,#5379,#11919,#11920));+#11916=ORIENTED_EDGE('',*,*,#11917,.T.);+#11917=EDGE_CURVE('',#5308,#5376,#11918,.T.);+#11918=LINE('',#5309,#451);+#11919=ORIENTED_EDGE('',*,*,#11907,.F.);+#11920=ORIENTED_EDGE('',*,*,#5312,.F.);+#11921=CYLINDRICAL_SURFACE('',#11922,1.E-01);+#11922=AXIS2_PLACEMENT_3D('',#5295,#2386,#2425);+#11923=ADVANCED_FACE('',(#11924),#11931,.F.);+#11924=FACE_BOUND('',#11925,.F.);+#11925=EDGE_LOOP('',(#11926,#5374,#11929,#11930));+#11926=ORIENTED_EDGE('',*,*,#11927,.T.);+#11927=EDGE_CURVE('',#5303,#5371,#11928,.T.);+#11928=LINE('',#5304,#451);+#11929=ORIENTED_EDGE('',*,*,#11917,.F.);+#11930=ORIENTED_EDGE('',*,*,#5307,.F.);+#11931=PLANE('',#11932);+#11932=AXIS2_PLACEMENT_3D('',#5304,#464,#408);+#11933=ADVANCED_FACE('',(#11934),#11941,.F.);+#11934=FACE_BOUND('',#11935,.F.);+#11935=EDGE_LOOP('',(#11936,#5369,#11939,#11940));+#11936=ORIENTED_EDGE('',*,*,#11937,.T.);+#11937=EDGE_CURVE('',#5298,#5366,#11938,.T.);+#11938=LINE('',#5299,#451);+#11939=ORIENTED_EDGE('',*,*,#11927,.F.);+#11940=ORIENTED_EDGE('',*,*,#5302,.F.);+#11941=PLANE('',#11942);+#11942=AXIS2_PLACEMENT_3D('',#5299,#408,#13);+#11943=ADVANCED_FACE('',(#11944),#11951,.F.);+#11944=FACE_BOUND('',#11945,.F.);+#11945=EDGE_LOOP('',(#11946,#5364,#11949,#11950));+#11946=ORIENTED_EDGE('',*,*,#11947,.T.);+#11947=EDGE_CURVE('',#5291,#5359,#11948,.T.);+#11948=LINE('',#5292,#451);+#11949=ORIENTED_EDGE('',*,*,#11937,.F.);+#11950=ORIENTED_EDGE('',*,*,#5297,.F.);+#11951=PLANE('',#11952);+#11952=AXIS2_PLACEMENT_3D('',#5292,#13,#2378);+#11953=ADVANCED_FACE('',(#11954),#11961,.T.);+#11954=FACE_BOUND('',#11955,.F.);+#11955=EDGE_LOOP('',(#11956,#5357,#11959,#11960));+#11956=ORIENTED_EDGE('',*,*,#11957,.T.);+#11957=EDGE_CURVE('',#5286,#5354,#11958,.T.);+#11958=LINE('',#5287,#451);+#11959=ORIENTED_EDGE('',*,*,#11947,.F.);+#11960=ORIENTED_EDGE('',*,*,#5290,.F.);+#11961=CYLINDRICAL_SURFACE('',#11962,0.2);+#11962=AXIS2_PLACEMENT_3D('',#5295,#2386,#2402);+#11963=ADVANCED_FACE('',(#11964),#11971,.F.);+#11964=FACE_BOUND('',#11965,.F.);+#11965=EDGE_LOOP('',(#11966,#5352,#11969,#11970));+#11966=ORIENTED_EDGE('',*,*,#11967,.T.);+#11967=EDGE_CURVE('',#5279,#5347,#11968,.T.);+#11968=LINE('',#5280,#451);+#11969=ORIENTED_EDGE('',*,*,#11957,.F.);+#11970=ORIENTED_EDGE('',*,*,#5285,.F.);+#11971=PLANE('',#11972);+#11972=AXIS2_PLACEMENT_3D('',#5280,#10319,#2394);+#11973=ADVANCED_FACE('',(#11974),#11981,.F.);+#11974=FACE_BOUND('',#11975,.F.);+#11975=EDGE_LOOP('',(#11976,#5345,#11979,#11980));+#11976=ORIENTED_EDGE('',*,*,#11977,.T.);+#11977=EDGE_CURVE('',#5273,#5341,#11978,.T.);+#11978=LINE('',#5274,#451);+#11979=ORIENTED_EDGE('',*,*,#11967,.F.);+#11980=ORIENTED_EDGE('',*,*,#5278,.F.);+#11981=CYLINDRICAL_SURFACE('',#5282,0.1);+#11982=ADVANCED_FACE('',(#11983),#11988,.F.);+#11983=FACE_BOUND('',#11984,.F.);+#11984=EDGE_LOOP('',(#11985,#11986,#5339,#11987));+#11985=ORIENTED_EDGE('',*,*,#5272,.F.);+#11986=ORIENTED_EDGE('',*,*,#10187,.T.);+#11987=ORIENTED_EDGE('',*,*,#11977,.F.);+#11988=PLANE('',#11989);+#11989=AXIS2_PLACEMENT_3D('',#5276,#13,#2378);+#11990=ADVANCED_FACE('',(#11991),#11998,.F.);+#11991=FACE_BOUND('',#11992,.F.);+#11992=EDGE_LOOP('',(#11993,#5537,#11996,#11997));+#11993=ORIENTED_EDGE('',*,*,#11994,.T.);+#11994=EDGE_CURVE('',#5465,#5533,#11995,.T.);+#11995=LINE('',#5466,#451);+#11996=ORIENTED_EDGE('',*,*,#5553,.F.);+#11997=ORIENTED_EDGE('',*,*,#5470,.F.);+#11998=PLANE('',#11999);+#11999=AXIS2_PLACEMENT_3D('',#5466,#10258,#2432);+#12000=ADVANCED_FACE('',(#12001),#12008,.F.);+#12001=FACE_BOUND('',#12002,.F.);+#12002=EDGE_LOOP('',(#12003,#5531,#12006,#12007));+#12003=ORIENTED_EDGE('',*,*,#12004,.T.);+#12004=EDGE_CURVE('',#5460,#5528,#12005,.T.);+#12005=LINE('',#5461,#451);+#12006=ORIENTED_EDGE('',*,*,#11994,.F.);+#12007=ORIENTED_EDGE('',*,*,#5464,.F.);+#12008=CYLINDRICAL_SURFACE('',#12009,1.E-01);+#12009=AXIS2_PLACEMENT_3D('',#5447,#2386,#2425);+#12010=ADVANCED_FACE('',(#12011),#12018,.F.);+#12011=FACE_BOUND('',#12012,.F.);+#12012=EDGE_LOOP('',(#12013,#5526,#12016,#12017));+#12013=ORIENTED_EDGE('',*,*,#12014,.T.);+#12014=EDGE_CURVE('',#5455,#5523,#12015,.T.);+#12015=LINE('',#5456,#451);+#12016=ORIENTED_EDGE('',*,*,#12004,.F.);+#12017=ORIENTED_EDGE('',*,*,#5459,.F.);+#12018=PLANE('',#12019);+#12019=AXIS2_PLACEMENT_3D('',#5456,#464,#408);+#12020=ADVANCED_FACE('',(#12021),#12028,.F.);+#12021=FACE_BOUND('',#12022,.F.);+#12022=EDGE_LOOP('',(#12023,#5521,#12026,#12027));+#12023=ORIENTED_EDGE('',*,*,#12024,.T.);+#12024=EDGE_CURVE('',#5450,#5518,#12025,.T.);+#12025=LINE('',#5451,#451);+#12026=ORIENTED_EDGE('',*,*,#12014,.F.);+#12027=ORIENTED_EDGE('',*,*,#5454,.F.);+#12028=PLANE('',#12029);+#12029=AXIS2_PLACEMENT_3D('',#5451,#408,#13);+#12030=ADVANCED_FACE('',(#12031),#12038,.F.);+#12031=FACE_BOUND('',#12032,.F.);+#12032=EDGE_LOOP('',(#12033,#5516,#12036,#12037));+#12033=ORIENTED_EDGE('',*,*,#12034,.T.);+#12034=EDGE_CURVE('',#5443,#5511,#12035,.T.);+#12035=LINE('',#5444,#451);+#12036=ORIENTED_EDGE('',*,*,#12024,.F.);+#12037=ORIENTED_EDGE('',*,*,#5449,.F.);+#12038=PLANE('',#12039);+#12039=AXIS2_PLACEMENT_3D('',#5444,#13,#2378);+#12040=ADVANCED_FACE('',(#12041),#12048,.T.);+#12041=FACE_BOUND('',#12042,.F.);+#12042=EDGE_LOOP('',(#12043,#5509,#12046,#12047));+#12043=ORIENTED_EDGE('',*,*,#12044,.T.);+#12044=EDGE_CURVE('',#5438,#5506,#12045,.T.);+#12045=LINE('',#5439,#451);+#12046=ORIENTED_EDGE('',*,*,#12034,.F.);+#12047=ORIENTED_EDGE('',*,*,#5442,.F.);+#12048=CYLINDRICAL_SURFACE('',#12049,0.2);+#12049=AXIS2_PLACEMENT_3D('',#5447,#2386,#2402);+#12050=ADVANCED_FACE('',(#12051),#12058,.F.);+#12051=FACE_BOUND('',#12052,.F.);+#12052=EDGE_LOOP('',(#12053,#5504,#12056,#12057));+#12053=ORIENTED_EDGE('',*,*,#12054,.T.);+#12054=EDGE_CURVE('',#5431,#5499,#12055,.T.);+#12055=LINE('',#5432,#451);+#12056=ORIENTED_EDGE('',*,*,#12044,.F.);+#12057=ORIENTED_EDGE('',*,*,#5437,.F.);+#12058=PLANE('',#12059);+#12059=AXIS2_PLACEMENT_3D('',#5432,#10319,#2394);+#12060=ADVANCED_FACE('',(#12061),#12068,.F.);+#12061=FACE_BOUND('',#12062,.F.);+#12062=EDGE_LOOP('',(#12063,#5497,#12066,#12067));+#12063=ORIENTED_EDGE('',*,*,#12064,.T.);+#12064=EDGE_CURVE('',#5425,#5493,#12065,.T.);+#12065=LINE('',#5426,#451);+#12066=ORIENTED_EDGE('',*,*,#12054,.F.);+#12067=ORIENTED_EDGE('',*,*,#5430,.F.);+#12068=CYLINDRICAL_SURFACE('',#5434,0.1);+#12069=ADVANCED_FACE('',(#12070),#12075,.F.);+#12070=FACE_BOUND('',#12071,.F.);+#12071=EDGE_LOOP('',(#12072,#12073,#5491,#12074));+#12072=ORIENTED_EDGE('',*,*,#5424,.F.);+#12073=ORIENTED_EDGE('',*,*,#10184,.T.);+#12074=ORIENTED_EDGE('',*,*,#12064,.F.);+#12075=PLANE('',#12076);+#12076=AXIS2_PLACEMENT_3D('',#5428,#13,#2378);+#12077=ADVANCED_FACE('',(#12078),#12085,.F.);+#12078=FACE_BOUND('',#12079,.F.);+#12079=EDGE_LOOP('',(#12080,#5689,#12083,#12084));+#12080=ORIENTED_EDGE('',*,*,#12081,.T.);+#12081=EDGE_CURVE('',#5617,#5685,#12082,.T.);+#12082=LINE('',#5618,#451);+#12083=ORIENTED_EDGE('',*,*,#5705,.F.);+#12084=ORIENTED_EDGE('',*,*,#5622,.F.);+#12085=PLANE('',#12086);+#12086=AXIS2_PLACEMENT_3D('',#5618,#10258,#2432);+#12087=ADVANCED_FACE('',(#12088),#12095,.F.);+#12088=FACE_BOUND('',#12089,.F.);+#12089=EDGE_LOOP('',(#12090,#5683,#12093,#12094));+#12090=ORIENTED_EDGE('',*,*,#12091,.T.);+#12091=EDGE_CURVE('',#5612,#5680,#12092,.T.);+#12092=LINE('',#5613,#451);+#12093=ORIENTED_EDGE('',*,*,#12081,.F.);+#12094=ORIENTED_EDGE('',*,*,#5616,.F.);+#12095=CYLINDRICAL_SURFACE('',#12096,1.E-01);+#12096=AXIS2_PLACEMENT_3D('',#5599,#2386,#2425);+#12097=ADVANCED_FACE('',(#12098),#12105,.F.);+#12098=FACE_BOUND('',#12099,.F.);+#12099=EDGE_LOOP('',(#12100,#5678,#12103,#12104));+#12100=ORIENTED_EDGE('',*,*,#12101,.T.);+#12101=EDGE_CURVE('',#5607,#5675,#12102,.T.);+#12102=LINE('',#5608,#451);+#12103=ORIENTED_EDGE('',*,*,#12091,.F.);+#12104=ORIENTED_EDGE('',*,*,#5611,.F.);+#12105=PLANE('',#12106);+#12106=AXIS2_PLACEMENT_3D('',#5608,#464,#408);+#12107=ADVANCED_FACE('',(#12108),#12115,.F.);+#12108=FACE_BOUND('',#12109,.F.);+#12109=EDGE_LOOP('',(#12110,#5673,#12113,#12114));+#12110=ORIENTED_EDGE('',*,*,#12111,.T.);+#12111=EDGE_CURVE('',#5602,#5670,#12112,.T.);+#12112=LINE('',#5603,#451);+#12113=ORIENTED_EDGE('',*,*,#12101,.F.);+#12114=ORIENTED_EDGE('',*,*,#5606,.F.);+#12115=PLANE('',#12116);+#12116=AXIS2_PLACEMENT_3D('',#5603,#408,#13);+#12117=ADVANCED_FACE('',(#12118),#12125,.F.);+#12118=FACE_BOUND('',#12119,.F.);+#12119=EDGE_LOOP('',(#12120,#5668,#12123,#12124));+#12120=ORIENTED_EDGE('',*,*,#12121,.T.);+#12121=EDGE_CURVE('',#5595,#5663,#12122,.T.);+#12122=LINE('',#5596,#451);+#12123=ORIENTED_EDGE('',*,*,#12111,.F.);+#12124=ORIENTED_EDGE('',*,*,#5601,.F.);+#12125=PLANE('',#12126);+#12126=AXIS2_PLACEMENT_3D('',#5596,#13,#2378);+#12127=ADVANCED_FACE('',(#12128),#12135,.T.);+#12128=FACE_BOUND('',#12129,.F.);+#12129=EDGE_LOOP('',(#12130,#5661,#12133,#12134));+#12130=ORIENTED_EDGE('',*,*,#12131,.T.);+#12131=EDGE_CURVE('',#5590,#5658,#12132,.T.);+#12132=LINE('',#5591,#451);+#12133=ORIENTED_EDGE('',*,*,#12121,.F.);+#12134=ORIENTED_EDGE('',*,*,#5594,.F.);+#12135=CYLINDRICAL_SURFACE('',#12136,0.2);+#12136=AXIS2_PLACEMENT_3D('',#5599,#2386,#2402);+#12137=ADVANCED_FACE('',(#12138),#12145,.F.);+#12138=FACE_BOUND('',#12139,.F.);+#12139=EDGE_LOOP('',(#12140,#5656,#12143,#12144));+#12140=ORIENTED_EDGE('',*,*,#12141,.T.);+#12141=EDGE_CURVE('',#5583,#5651,#12142,.T.);+#12142=LINE('',#5584,#451);+#12143=ORIENTED_EDGE('',*,*,#12131,.F.);+#12144=ORIENTED_EDGE('',*,*,#5589,.F.);+#12145=PLANE('',#12146);+#12146=AXIS2_PLACEMENT_3D('',#5584,#10319,#2394);+#12147=ADVANCED_FACE('',(#12148),#12155,.F.);+#12148=FACE_BOUND('',#12149,.F.);+#12149=EDGE_LOOP('',(#12150,#5649,#12153,#12154));+#12150=ORIENTED_EDGE('',*,*,#12151,.T.);+#12151=EDGE_CURVE('',#5577,#5645,#12152,.T.);+#12152=LINE('',#5578,#451);+#12153=ORIENTED_EDGE('',*,*,#12141,.F.);+#12154=ORIENTED_EDGE('',*,*,#5582,.F.);+#12155=CYLINDRICAL_SURFACE('',#5586,0.1);+#12156=ADVANCED_FACE('',(#12157),#12162,.F.);+#12157=FACE_BOUND('',#12158,.F.);+#12158=EDGE_LOOP('',(#12159,#12160,#5643,#12161));+#12159=ORIENTED_EDGE('',*,*,#5576,.F.);+#12160=ORIENTED_EDGE('',*,*,#10181,.T.);+#12161=ORIENTED_EDGE('',*,*,#12151,.F.);+#12162=PLANE('',#12163);+#12163=AXIS2_PLACEMENT_3D('',#5580,#13,#2378);+#12164=ADVANCED_FACE('',(#12165),#12172,.F.);+#12165=FACE_BOUND('',#12166,.F.);+#12166=EDGE_LOOP('',(#12167,#5841,#12170,#12171));+#12167=ORIENTED_EDGE('',*,*,#12168,.T.);+#12168=EDGE_CURVE('',#5769,#5837,#12169,.T.);+#12169=LINE('',#5770,#451);+#12170=ORIENTED_EDGE('',*,*,#5857,.F.);+#12171=ORIENTED_EDGE('',*,*,#5774,.F.);+#12172=PLANE('',#12173);+#12173=AXIS2_PLACEMENT_3D('',#5770,#10258,#2432);+#12174=ADVANCED_FACE('',(#12175),#12182,.F.);+#12175=FACE_BOUND('',#12176,.F.);+#12176=EDGE_LOOP('',(#12177,#5835,#12180,#12181));+#12177=ORIENTED_EDGE('',*,*,#12178,.T.);+#12178=EDGE_CURVE('',#5764,#5832,#12179,.T.);+#12179=LINE('',#5765,#451);+#12180=ORIENTED_EDGE('',*,*,#12168,.F.);+#12181=ORIENTED_EDGE('',*,*,#5768,.F.);+#12182=CYLINDRICAL_SURFACE('',#12183,1.E-01);+#12183=AXIS2_PLACEMENT_3D('',#5751,#2386,#2425);+#12184=ADVANCED_FACE('',(#12185),#12192,.F.);+#12185=FACE_BOUND('',#12186,.F.);+#12186=EDGE_LOOP('',(#12187,#5830,#12190,#12191));+#12187=ORIENTED_EDGE('',*,*,#12188,.T.);+#12188=EDGE_CURVE('',#5759,#5827,#12189,.T.);+#12189=LINE('',#5760,#451);+#12190=ORIENTED_EDGE('',*,*,#12178,.F.);+#12191=ORIENTED_EDGE('',*,*,#5763,.F.);+#12192=PLANE('',#12193);+#12193=AXIS2_PLACEMENT_3D('',#5760,#464,#408);+#12194=ADVANCED_FACE('',(#12195),#12202,.F.);+#12195=FACE_BOUND('',#12196,.F.);+#12196=EDGE_LOOP('',(#12197,#5825,#12200,#12201));+#12197=ORIENTED_EDGE('',*,*,#12198,.T.);+#12198=EDGE_CURVE('',#5754,#5822,#12199,.T.);+#12199=LINE('',#5755,#451);+#12200=ORIENTED_EDGE('',*,*,#12188,.F.);+#12201=ORIENTED_EDGE('',*,*,#5758,.F.);+#12202=PLANE('',#12203);+#12203=AXIS2_PLACEMENT_3D('',#5755,#408,#13);+#12204=ADVANCED_FACE('',(#12205),#12212,.F.);+#12205=FACE_BOUND('',#12206,.F.);+#12206=EDGE_LOOP('',(#12207,#5820,#12210,#12211));+#12207=ORIENTED_EDGE('',*,*,#12208,.T.);+#12208=EDGE_CURVE('',#5747,#5815,#12209,.T.);+#12209=LINE('',#5748,#451);+#12210=ORIENTED_EDGE('',*,*,#12198,.F.);+#12211=ORIENTED_EDGE('',*,*,#5753,.F.);+#12212=PLANE('',#12213);+#12213=AXIS2_PLACEMENT_3D('',#5748,#13,#2378);+#12214=ADVANCED_FACE('',(#12215),#12222,.T.);+#12215=FACE_BOUND('',#12216,.F.);+#12216=EDGE_LOOP('',(#12217,#5813,#12220,#12221));+#12217=ORIENTED_EDGE('',*,*,#12218,.T.);+#12218=EDGE_CURVE('',#5742,#5810,#12219,.T.);+#12219=LINE('',#5743,#451);+#12220=ORIENTED_EDGE('',*,*,#12208,.F.);+#12221=ORIENTED_EDGE('',*,*,#5746,.F.);+#12222=CYLINDRICAL_SURFACE('',#12223,0.2);+#12223=AXIS2_PLACEMENT_3D('',#5751,#2386,#2402);+#12224=ADVANCED_FACE('',(#12225),#12232,.F.);+#12225=FACE_BOUND('',#12226,.F.);+#12226=EDGE_LOOP('',(#12227,#5808,#12230,#12231));+#12227=ORIENTED_EDGE('',*,*,#12228,.T.);+#12228=EDGE_CURVE('',#5735,#5803,#12229,.T.);+#12229=LINE('',#5736,#451);+#12230=ORIENTED_EDGE('',*,*,#12218,.F.);+#12231=ORIENTED_EDGE('',*,*,#5741,.F.);+#12232=PLANE('',#12233);+#12233=AXIS2_PLACEMENT_3D('',#5736,#10319,#2394);+#12234=ADVANCED_FACE('',(#12235),#12242,.F.);+#12235=FACE_BOUND('',#12236,.F.);+#12236=EDGE_LOOP('',(#12237,#5801,#12240,#12241));+#12237=ORIENTED_EDGE('',*,*,#12238,.T.);+#12238=EDGE_CURVE('',#5729,#5797,#12239,.T.);+#12239=LINE('',#5730,#451);+#12240=ORIENTED_EDGE('',*,*,#12228,.F.);+#12241=ORIENTED_EDGE('',*,*,#5734,.F.);+#12242=CYLINDRICAL_SURFACE('',#5738,0.1);+#12243=ADVANCED_FACE('',(#12244),#12249,.F.);+#12244=FACE_BOUND('',#12245,.F.);+#12245=EDGE_LOOP('',(#12246,#12247,#5795,#12248));+#12246=ORIENTED_EDGE('',*,*,#5728,.F.);+#12247=ORIENTED_EDGE('',*,*,#10178,.T.);+#12248=ORIENTED_EDGE('',*,*,#12238,.F.);+#12249=PLANE('',#12250);+#12250=AXIS2_PLACEMENT_3D('',#5732,#13,#2378);+#12251=ADVANCED_FACE('',(#12252),#12259,.F.);+#12252=FACE_BOUND('',#12253,.F.);+#12253=EDGE_LOOP('',(#12254,#5993,#12257,#12258));+#12254=ORIENTED_EDGE('',*,*,#12255,.T.);+#12255=EDGE_CURVE('',#5921,#5989,#12256,.T.);+#12256=LINE('',#5922,#451);+#12257=ORIENTED_EDGE('',*,*,#6009,.F.);+#12258=ORIENTED_EDGE('',*,*,#5926,.F.);+#12259=PLANE('',#12260);+#12260=AXIS2_PLACEMENT_3D('',#5922,#10258,#2432);+#12261=ADVANCED_FACE('',(#12262),#12269,.F.);+#12262=FACE_BOUND('',#12263,.F.);+#12263=EDGE_LOOP('',(#12264,#5987,#12267,#12268));+#12264=ORIENTED_EDGE('',*,*,#12265,.T.);+#12265=EDGE_CURVE('',#5916,#5984,#12266,.T.);+#12266=LINE('',#5917,#451);+#12267=ORIENTED_EDGE('',*,*,#12255,.F.);+#12268=ORIENTED_EDGE('',*,*,#5920,.F.);+#12269=CYLINDRICAL_SURFACE('',#12270,1.E-01);+#12270=AXIS2_PLACEMENT_3D('',#5903,#2386,#2425);+#12271=ADVANCED_FACE('',(#12272),#12279,.F.);+#12272=FACE_BOUND('',#12273,.F.);+#12273=EDGE_LOOP('',(#12274,#5982,#12277,#12278));+#12274=ORIENTED_EDGE('',*,*,#12275,.T.);+#12275=EDGE_CURVE('',#5911,#5979,#12276,.T.);+#12276=LINE('',#5912,#451);+#12277=ORIENTED_EDGE('',*,*,#12265,.F.);+#12278=ORIENTED_EDGE('',*,*,#5915,.F.);+#12279=PLANE('',#12280);+#12280=AXIS2_PLACEMENT_3D('',#5912,#464,#408);+#12281=ADVANCED_FACE('',(#12282),#12289,.F.);+#12282=FACE_BOUND('',#12283,.F.);+#12283=EDGE_LOOP('',(#12284,#5977,#12287,#12288));+#12284=ORIENTED_EDGE('',*,*,#12285,.T.);+#12285=EDGE_CURVE('',#5906,#5974,#12286,.T.);+#12286=LINE('',#5907,#451);+#12287=ORIENTED_EDGE('',*,*,#12275,.F.);+#12288=ORIENTED_EDGE('',*,*,#5910,.F.);+#12289=PLANE('',#12290);+#12290=AXIS2_PLACEMENT_3D('',#5907,#408,#13);+#12291=ADVANCED_FACE('',(#12292),#12299,.F.);+#12292=FACE_BOUND('',#12293,.F.);+#12293=EDGE_LOOP('',(#12294,#5972,#12297,#12298));+#12294=ORIENTED_EDGE('',*,*,#12295,.T.);+#12295=EDGE_CURVE('',#5899,#5967,#12296,.T.);+#12296=LINE('',#5900,#451);+#12297=ORIENTED_EDGE('',*,*,#12285,.F.);+#12298=ORIENTED_EDGE('',*,*,#5905,.F.);+#12299=PLANE('',#12300);+#12300=AXIS2_PLACEMENT_3D('',#5900,#13,#2378);+#12301=ADVANCED_FACE('',(#12302),#12309,.T.);+#12302=FACE_BOUND('',#12303,.F.);+#12303=EDGE_LOOP('',(#12304,#5965,#12307,#12308));+#12304=ORIENTED_EDGE('',*,*,#12305,.T.);+#12305=EDGE_CURVE('',#5894,#5962,#12306,.T.);+#12306=LINE('',#5895,#451);+#12307=ORIENTED_EDGE('',*,*,#12295,.F.);+#12308=ORIENTED_EDGE('',*,*,#5898,.F.);+#12309=CYLINDRICAL_SURFACE('',#12310,0.2);+#12310=AXIS2_PLACEMENT_3D('',#5903,#2386,#2402);+#12311=ADVANCED_FACE('',(#12312),#12319,.F.);+#12312=FACE_BOUND('',#12313,.F.);+#12313=EDGE_LOOP('',(#12314,#5960,#12317,#12318));+#12314=ORIENTED_EDGE('',*,*,#12315,.T.);+#12315=EDGE_CURVE('',#5887,#5955,#12316,.T.);+#12316=LINE('',#5888,#451);+#12317=ORIENTED_EDGE('',*,*,#12305,.F.);+#12318=ORIENTED_EDGE('',*,*,#5893,.F.);+#12319=PLANE('',#12320);+#12320=AXIS2_PLACEMENT_3D('',#5888,#10319,#2394);+#12321=ADVANCED_FACE('',(#12322),#12329,.F.);+#12322=FACE_BOUND('',#12323,.F.);+#12323=EDGE_LOOP('',(#12324,#5953,#12327,#12328));+#12324=ORIENTED_EDGE('',*,*,#12325,.T.);+#12325=EDGE_CURVE('',#5881,#5949,#12326,.T.);+#12326=LINE('',#5882,#451);+#12327=ORIENTED_EDGE('',*,*,#12315,.F.);+#12328=ORIENTED_EDGE('',*,*,#5886,.F.);+#12329=CYLINDRICAL_SURFACE('',#5890,0.1);+#12330=ADVANCED_FACE('',(#12331),#12336,.F.);+#12331=FACE_BOUND('',#12332,.F.);+#12332=EDGE_LOOP('',(#12333,#12334,#5947,#12335));+#12333=ORIENTED_EDGE('',*,*,#5880,.F.);+#12334=ORIENTED_EDGE('',*,*,#10175,.T.);+#12335=ORIENTED_EDGE('',*,*,#12325,.F.);+#12336=PLANE('',#12337);+#12337=AXIS2_PLACEMENT_3D('',#5884,#13,#2378);+#12338=ADVANCED_FACE('',(#12339),#12346,.F.);+#12339=FACE_BOUND('',#12340,.F.);+#12340=EDGE_LOOP('',(#12341,#6145,#12344,#12345));+#12341=ORIENTED_EDGE('',*,*,#12342,.T.);+#12342=EDGE_CURVE('',#6073,#6141,#12343,.T.);+#12343=LINE('',#6074,#451);+#12344=ORIENTED_EDGE('',*,*,#6161,.F.);+#12345=ORIENTED_EDGE('',*,*,#6078,.F.);+#12346=PLANE('',#12347);+#12347=AXIS2_PLACEMENT_3D('',#6074,#10258,#2432);+#12348=ADVANCED_FACE('',(#12349),#12356,.F.);+#12349=FACE_BOUND('',#12350,.F.);+#12350=EDGE_LOOP('',(#12351,#6139,#12354,#12355));+#12351=ORIENTED_EDGE('',*,*,#12352,.T.);+#12352=EDGE_CURVE('',#6068,#6136,#12353,.T.);+#12353=LINE('',#6069,#451);+#12354=ORIENTED_EDGE('',*,*,#12342,.F.);+#12355=ORIENTED_EDGE('',*,*,#6072,.F.);+#12356=CYLINDRICAL_SURFACE('',#12357,1.E-01);+#12357=AXIS2_PLACEMENT_3D('',#6055,#2386,#2425);+#12358=ADVANCED_FACE('',(#12359),#12366,.F.);+#12359=FACE_BOUND('',#12360,.F.);+#12360=EDGE_LOOP('',(#12361,#6134,#12364,#12365));+#12361=ORIENTED_EDGE('',*,*,#12362,.T.);+#12362=EDGE_CURVE('',#6063,#6131,#12363,.T.);+#12363=LINE('',#6064,#451);+#12364=ORIENTED_EDGE('',*,*,#12352,.F.);+#12365=ORIENTED_EDGE('',*,*,#6067,.F.);+#12366=PLANE('',#12367);+#12367=AXIS2_PLACEMENT_3D('',#6064,#464,#408);+#12368=ADVANCED_FACE('',(#12369),#12376,.F.);+#12369=FACE_BOUND('',#12370,.F.);+#12370=EDGE_LOOP('',(#12371,#6129,#12374,#12375));+#12371=ORIENTED_EDGE('',*,*,#12372,.T.);+#12372=EDGE_CURVE('',#6058,#6126,#12373,.T.);+#12373=LINE('',#6059,#451);+#12374=ORIENTED_EDGE('',*,*,#12362,.F.);+#12375=ORIENTED_EDGE('',*,*,#6062,.F.);+#12376=PLANE('',#12377);+#12377=AXIS2_PLACEMENT_3D('',#6059,#408,#13);+#12378=ADVANCED_FACE('',(#12379),#12386,.F.);+#12379=FACE_BOUND('',#12380,.F.);+#12380=EDGE_LOOP('',(#12381,#6124,#12384,#12385));+#12381=ORIENTED_EDGE('',*,*,#12382,.T.);+#12382=EDGE_CURVE('',#6051,#6119,#12383,.T.);+#12383=LINE('',#6052,#451);+#12384=ORIENTED_EDGE('',*,*,#12372,.F.);+#12385=ORIENTED_EDGE('',*,*,#6057,.F.);+#12386=PLANE('',#12387);+#12387=AXIS2_PLACEMENT_3D('',#6052,#13,#2378);+#12388=ADVANCED_FACE('',(#12389),#12396,.T.);+#12389=FACE_BOUND('',#12390,.F.);+#12390=EDGE_LOOP('',(#12391,#6117,#12394,#12395));+#12391=ORIENTED_EDGE('',*,*,#12392,.T.);+#12392=EDGE_CURVE('',#6046,#6114,#12393,.T.);+#12393=LINE('',#6047,#451);+#12394=ORIENTED_EDGE('',*,*,#12382,.F.);+#12395=ORIENTED_EDGE('',*,*,#6050,.F.);+#12396=CYLINDRICAL_SURFACE('',#12397,0.2);+#12397=AXIS2_PLACEMENT_3D('',#6055,#2386,#2402);+#12398=ADVANCED_FACE('',(#12399),#12406,.F.);+#12399=FACE_BOUND('',#12400,.F.);+#12400=EDGE_LOOP('',(#12401,#6112,#12404,#12405));+#12401=ORIENTED_EDGE('',*,*,#12402,.T.);+#12402=EDGE_CURVE('',#6039,#6107,#12403,.T.);+#12403=LINE('',#6040,#451);+#12404=ORIENTED_EDGE('',*,*,#12392,.F.);+#12405=ORIENTED_EDGE('',*,*,#6045,.F.);+#12406=PLANE('',#12407);+#12407=AXIS2_PLACEMENT_3D('',#6040,#10319,#2394);+#12408=ADVANCED_FACE('',(#12409),#12416,.F.);+#12409=FACE_BOUND('',#12410,.F.);+#12410=EDGE_LOOP('',(#12411,#6105,#12414,#12415));+#12411=ORIENTED_EDGE('',*,*,#12412,.T.);+#12412=EDGE_CURVE('',#6033,#6101,#12413,.T.);+#12413=LINE('',#6034,#451);+#12414=ORIENTED_EDGE('',*,*,#12402,.F.);+#12415=ORIENTED_EDGE('',*,*,#6038,.F.);+#12416=CYLINDRICAL_SURFACE('',#6042,0.1);+#12417=ADVANCED_FACE('',(#12418),#12423,.F.);+#12418=FACE_BOUND('',#12419,.F.);+#12419=EDGE_LOOP('',(#12420,#12421,#6099,#12422));+#12420=ORIENTED_EDGE('',*,*,#6032,.F.);+#12421=ORIENTED_EDGE('',*,*,#10172,.T.);+#12422=ORIENTED_EDGE('',*,*,#12412,.F.);+#12423=PLANE('',#12424);+#12424=AXIS2_PLACEMENT_3D('',#6036,#13,#2378);+#12425=ADVANCED_FACE('',(#12426),#12433,.F.);+#12426=FACE_BOUND('',#12427,.F.);+#12427=EDGE_LOOP('',(#12428,#6297,#12431,#12432));+#12428=ORIENTED_EDGE('',*,*,#12429,.T.);+#12429=EDGE_CURVE('',#6225,#6293,#12430,.T.);+#12430=LINE('',#6226,#451);+#12431=ORIENTED_EDGE('',*,*,#6313,.F.);+#12432=ORIENTED_EDGE('',*,*,#6230,.F.);+#12433=PLANE('',#12434);+#12434=AXIS2_PLACEMENT_3D('',#6226,#10258,#2432);+#12435=ADVANCED_FACE('',(#12436),#12443,.F.);+#12436=FACE_BOUND('',#12437,.F.);+#12437=EDGE_LOOP('',(#12438,#6291,#12441,#12442));+#12438=ORIENTED_EDGE('',*,*,#12439,.T.);+#12439=EDGE_CURVE('',#6220,#6288,#12440,.T.);+#12440=LINE('',#6221,#451);+#12441=ORIENTED_EDGE('',*,*,#12429,.F.);+#12442=ORIENTED_EDGE('',*,*,#6224,.F.);+#12443=CYLINDRICAL_SURFACE('',#12444,1.E-01);+#12444=AXIS2_PLACEMENT_3D('',#6207,#2386,#2425);+#12445=ADVANCED_FACE('',(#12446),#12453,.F.);+#12446=FACE_BOUND('',#12447,.F.);+#12447=EDGE_LOOP('',(#12448,#6286,#12451,#12452));+#12448=ORIENTED_EDGE('',*,*,#12449,.T.);+#12449=EDGE_CURVE('',#6215,#6283,#12450,.T.);+#12450=LINE('',#6216,#451);+#12451=ORIENTED_EDGE('',*,*,#12439,.F.);+#12452=ORIENTED_EDGE('',*,*,#6219,.F.);+#12453=PLANE('',#12454);+#12454=AXIS2_PLACEMENT_3D('',#6216,#464,#408);+#12455=ADVANCED_FACE('',(#12456),#12463,.F.);+#12456=FACE_BOUND('',#12457,.F.);+#12457=EDGE_LOOP('',(#12458,#6281,#12461,#12462));+#12458=ORIENTED_EDGE('',*,*,#12459,.T.);+#12459=EDGE_CURVE('',#6210,#6278,#12460,.T.);+#12460=LINE('',#6211,#451);+#12461=ORIENTED_EDGE('',*,*,#12449,.F.);+#12462=ORIENTED_EDGE('',*,*,#6214,.F.);+#12463=PLANE('',#12464);+#12464=AXIS2_PLACEMENT_3D('',#6211,#408,#13);+#12465=ADVANCED_FACE('',(#12466),#12473,.F.);+#12466=FACE_BOUND('',#12467,.F.);+#12467=EDGE_LOOP('',(#12468,#6276,#12471,#12472));+#12468=ORIENTED_EDGE('',*,*,#12469,.T.);+#12469=EDGE_CURVE('',#6203,#6271,#12470,.T.);+#12470=LINE('',#6204,#451);+#12471=ORIENTED_EDGE('',*,*,#12459,.F.);+#12472=ORIENTED_EDGE('',*,*,#6209,.F.);+#12473=PLANE('',#12474);+#12474=AXIS2_PLACEMENT_3D('',#6204,#13,#2378);+#12475=ADVANCED_FACE('',(#12476),#12483,.T.);+#12476=FACE_BOUND('',#12477,.F.);+#12477=EDGE_LOOP('',(#12478,#6269,#12481,#12482));+#12478=ORIENTED_EDGE('',*,*,#12479,.T.);+#12479=EDGE_CURVE('',#6198,#6266,#12480,.T.);+#12480=LINE('',#6199,#451);+#12481=ORIENTED_EDGE('',*,*,#12469,.F.);+#12482=ORIENTED_EDGE('',*,*,#6202,.F.);+#12483=CYLINDRICAL_SURFACE('',#12484,0.2);+#12484=AXIS2_PLACEMENT_3D('',#6207,#2386,#2402);+#12485=ADVANCED_FACE('',(#12486),#12493,.F.);+#12486=FACE_BOUND('',#12487,.F.);+#12487=EDGE_LOOP('',(#12488,#6264,#12491,#12492));+#12488=ORIENTED_EDGE('',*,*,#12489,.T.);+#12489=EDGE_CURVE('',#6191,#6259,#12490,.T.);+#12490=LINE('',#6192,#451);+#12491=ORIENTED_EDGE('',*,*,#12479,.F.);+#12492=ORIENTED_EDGE('',*,*,#6197,.F.);+#12493=PLANE('',#12494);+#12494=AXIS2_PLACEMENT_3D('',#6192,#10319,#2394);+#12495=ADVANCED_FACE('',(#12496),#12503,.F.);+#12496=FACE_BOUND('',#12497,.F.);+#12497=EDGE_LOOP('',(#12498,#6257,#12501,#12502));+#12498=ORIENTED_EDGE('',*,*,#12499,.T.);+#12499=EDGE_CURVE('',#6185,#6253,#12500,.T.);+#12500=LINE('',#6186,#451);+#12501=ORIENTED_EDGE('',*,*,#12489,.F.);+#12502=ORIENTED_EDGE('',*,*,#6190,.F.);+#12503=CYLINDRICAL_SURFACE('',#6194,0.1);+#12504=ADVANCED_FACE('',(#12505),#12510,.F.);+#12505=FACE_BOUND('',#12506,.F.);+#12506=EDGE_LOOP('',(#12507,#12508,#6251,#12509));+#12507=ORIENTED_EDGE('',*,*,#6184,.F.);+#12508=ORIENTED_EDGE('',*,*,#10169,.T.);+#12509=ORIENTED_EDGE('',*,*,#12499,.F.);+#12510=PLANE('',#12511);+#12511=AXIS2_PLACEMENT_3D('',#6188,#13,#2378);+#12512=ADVANCED_FACE('',(#12513),#12520,.F.);+#12513=FACE_BOUND('',#12514,.F.);+#12514=EDGE_LOOP('',(#12515,#6449,#12518,#12519));+#12515=ORIENTED_EDGE('',*,*,#12516,.T.);+#12516=EDGE_CURVE('',#6377,#6445,#12517,.T.);+#12517=LINE('',#6378,#451);+#12518=ORIENTED_EDGE('',*,*,#6465,.F.);+#12519=ORIENTED_EDGE('',*,*,#6382,.F.);+#12520=PLANE('',#12521);+#12521=AXIS2_PLACEMENT_3D('',#6378,#10258,#2432);+#12522=ADVANCED_FACE('',(#12523),#12530,.F.);+#12523=FACE_BOUND('',#12524,.F.);+#12524=EDGE_LOOP('',(#12525,#6443,#12528,#12529));+#12525=ORIENTED_EDGE('',*,*,#12526,.T.);+#12526=EDGE_CURVE('',#6372,#6440,#12527,.T.);+#12527=LINE('',#6373,#451);+#12528=ORIENTED_EDGE('',*,*,#12516,.F.);+#12529=ORIENTED_EDGE('',*,*,#6376,.F.);+#12530=CYLINDRICAL_SURFACE('',#12531,1.E-01);+#12531=AXIS2_PLACEMENT_3D('',#6359,#2386,#2425);+#12532=ADVANCED_FACE('',(#12533),#12540,.F.);+#12533=FACE_BOUND('',#12534,.F.);+#12534=EDGE_LOOP('',(#12535,#6438,#12538,#12539));+#12535=ORIENTED_EDGE('',*,*,#12536,.T.);+#12536=EDGE_CURVE('',#6367,#6435,#12537,.T.);+#12537=LINE('',#6368,#451);+#12538=ORIENTED_EDGE('',*,*,#12526,.F.);+#12539=ORIENTED_EDGE('',*,*,#6371,.F.);+#12540=PLANE('',#12541);+#12541=AXIS2_PLACEMENT_3D('',#6368,#464,#408);+#12542=ADVANCED_FACE('',(#12543),#12550,.F.);+#12543=FACE_BOUND('',#12544,.F.);+#12544=EDGE_LOOP('',(#12545,#6433,#12548,#12549));+#12545=ORIENTED_EDGE('',*,*,#12546,.T.);+#12546=EDGE_CURVE('',#6362,#6430,#12547,.T.);+#12547=LINE('',#6363,#451);+#12548=ORIENTED_EDGE('',*,*,#12536,.F.);+#12549=ORIENTED_EDGE('',*,*,#6366,.F.);+#12550=PLANE('',#12551);+#12551=AXIS2_PLACEMENT_3D('',#6363,#408,#13);+#12552=ADVANCED_FACE('',(#12553),#12560,.F.);+#12553=FACE_BOUND('',#12554,.F.);+#12554=EDGE_LOOP('',(#12555,#6428,#12558,#12559));+#12555=ORIENTED_EDGE('',*,*,#12556,.T.);+#12556=EDGE_CURVE('',#6355,#6423,#12557,.T.);+#12557=LINE('',#6356,#451);+#12558=ORIENTED_EDGE('',*,*,#12546,.F.);+#12559=ORIENTED_EDGE('',*,*,#6361,.F.);+#12560=PLANE('',#12561);+#12561=AXIS2_PLACEMENT_3D('',#6356,#13,#2378);+#12562=ADVANCED_FACE('',(#12563),#12570,.T.);+#12563=FACE_BOUND('',#12564,.F.);+#12564=EDGE_LOOP('',(#12565,#6421,#12568,#12569));+#12565=ORIENTED_EDGE('',*,*,#12566,.T.);+#12566=EDGE_CURVE('',#6350,#6418,#12567,.T.);+#12567=LINE('',#6351,#451);+#12568=ORIENTED_EDGE('',*,*,#12556,.F.);+#12569=ORIENTED_EDGE('',*,*,#6354,.F.);+#12570=CYLINDRICAL_SURFACE('',#12571,0.2);+#12571=AXIS2_PLACEMENT_3D('',#6359,#2386,#2402);+#12572=ADVANCED_FACE('',(#12573),#12580,.F.);+#12573=FACE_BOUND('',#12574,.F.);+#12574=EDGE_LOOP('',(#12575,#6416,#12578,#12579));+#12575=ORIENTED_EDGE('',*,*,#12576,.T.);+#12576=EDGE_CURVE('',#6343,#6411,#12577,.T.);+#12577=LINE('',#6344,#451);+#12578=ORIENTED_EDGE('',*,*,#12566,.F.);+#12579=ORIENTED_EDGE('',*,*,#6349,.F.);+#12580=PLANE('',#12581);+#12581=AXIS2_PLACEMENT_3D('',#6344,#10319,#2394);+#12582=ADVANCED_FACE('',(#12583),#12590,.F.);+#12583=FACE_BOUND('',#12584,.F.);+#12584=EDGE_LOOP('',(#12585,#6409,#12588,#12589));+#12585=ORIENTED_EDGE('',*,*,#12586,.T.);+#12586=EDGE_CURVE('',#6337,#6405,#12587,.T.);+#12587=LINE('',#6338,#451);+#12588=ORIENTED_EDGE('',*,*,#12576,.F.);+#12589=ORIENTED_EDGE('',*,*,#6342,.F.);+#12590=CYLINDRICAL_SURFACE('',#6346,0.1);+#12591=ADVANCED_FACE('',(#12592),#12597,.F.);+#12592=FACE_BOUND('',#12593,.F.);+#12593=EDGE_LOOP('',(#12594,#12595,#6403,#12596));+#12594=ORIENTED_EDGE('',*,*,#6336,.F.);+#12595=ORIENTED_EDGE('',*,*,#10166,.T.);+#12596=ORIENTED_EDGE('',*,*,#12586,.F.);+#12597=PLANE('',#12598);+#12598=AXIS2_PLACEMENT_3D('',#6340,#13,#2378);+#12599=ADVANCED_FACE('',(#12600),#12607,.F.);+#12600=FACE_BOUND('',#12601,.F.);+#12601=EDGE_LOOP('',(#12602,#6601,#12605,#12606));+#12602=ORIENTED_EDGE('',*,*,#12603,.T.);+#12603=EDGE_CURVE('',#6529,#6597,#12604,.T.);+#12604=LINE('',#6530,#451);+#12605=ORIENTED_EDGE('',*,*,#6617,.F.);+#12606=ORIENTED_EDGE('',*,*,#6534,.F.);+#12607=PLANE('',#12608);+#12608=AXIS2_PLACEMENT_3D('',#6530,#10258,#2432);+#12609=ADVANCED_FACE('',(#12610),#12617,.F.);+#12610=FACE_BOUND('',#12611,.F.);+#12611=EDGE_LOOP('',(#12612,#6595,#12615,#12616));+#12612=ORIENTED_EDGE('',*,*,#12613,.T.);+#12613=EDGE_CURVE('',#6524,#6592,#12614,.T.);+#12614=LINE('',#6525,#451);+#12615=ORIENTED_EDGE('',*,*,#12603,.F.);+#12616=ORIENTED_EDGE('',*,*,#6528,.F.);+#12617=CYLINDRICAL_SURFACE('',#12618,1.E-01);+#12618=AXIS2_PLACEMENT_3D('',#6511,#2386,#2425);+#12619=ADVANCED_FACE('',(#12620),#12627,.F.);+#12620=FACE_BOUND('',#12621,.F.);+#12621=EDGE_LOOP('',(#12622,#6590,#12625,#12626));+#12622=ORIENTED_EDGE('',*,*,#12623,.T.);+#12623=EDGE_CURVE('',#6519,#6587,#12624,.T.);+#12624=LINE('',#6520,#451);+#12625=ORIENTED_EDGE('',*,*,#12613,.F.);+#12626=ORIENTED_EDGE('',*,*,#6523,.F.);+#12627=PLANE('',#12628);+#12628=AXIS2_PLACEMENT_3D('',#6520,#464,#408);+#12629=ADVANCED_FACE('',(#12630),#12637,.F.);+#12630=FACE_BOUND('',#12631,.F.);+#12631=EDGE_LOOP('',(#12632,#6585,#12635,#12636));+#12632=ORIENTED_EDGE('',*,*,#12633,.T.);+#12633=EDGE_CURVE('',#6514,#6582,#12634,.T.);+#12634=LINE('',#6515,#451);+#12635=ORIENTED_EDGE('',*,*,#12623,.F.);+#12636=ORIENTED_EDGE('',*,*,#6518,.F.);+#12637=PLANE('',#12638);+#12638=AXIS2_PLACEMENT_3D('',#6515,#408,#13);+#12639=ADVANCED_FACE('',(#12640),#12647,.F.);+#12640=FACE_BOUND('',#12641,.F.);+#12641=EDGE_LOOP('',(#12642,#6580,#12645,#12646));+#12642=ORIENTED_EDGE('',*,*,#12643,.T.);+#12643=EDGE_CURVE('',#6507,#6575,#12644,.T.);+#12644=LINE('',#6508,#451);+#12645=ORIENTED_EDGE('',*,*,#12633,.F.);+#12646=ORIENTED_EDGE('',*,*,#6513,.F.);+#12647=PLANE('',#12648);+#12648=AXIS2_PLACEMENT_3D('',#6508,#13,#2378);+#12649=ADVANCED_FACE('',(#12650),#12657,.T.);+#12650=FACE_BOUND('',#12651,.F.);+#12651=EDGE_LOOP('',(#12652,#6573,#12655,#12656));+#12652=ORIENTED_EDGE('',*,*,#12653,.T.);+#12653=EDGE_CURVE('',#6502,#6570,#12654,.T.);+#12654=LINE('',#6503,#451);+#12655=ORIENTED_EDGE('',*,*,#12643,.F.);+#12656=ORIENTED_EDGE('',*,*,#6506,.F.);+#12657=CYLINDRICAL_SURFACE('',#12658,0.2);+#12658=AXIS2_PLACEMENT_3D('',#6511,#2386,#2402);+#12659=ADVANCED_FACE('',(#12660),#12667,.F.);+#12660=FACE_BOUND('',#12661,.F.);+#12661=EDGE_LOOP('',(#12662,#6568,#12665,#12666));+#12662=ORIENTED_EDGE('',*,*,#12663,.T.);+#12663=EDGE_CURVE('',#6495,#6563,#12664,.T.);+#12664=LINE('',#6496,#451);+#12665=ORIENTED_EDGE('',*,*,#12653,.F.);+#12666=ORIENTED_EDGE('',*,*,#6501,.F.);+#12667=PLANE('',#12668);+#12668=AXIS2_PLACEMENT_3D('',#6496,#10319,#2394);+#12669=ADVANCED_FACE('',(#12670),#12677,.F.);+#12670=FACE_BOUND('',#12671,.F.);+#12671=EDGE_LOOP('',(#12672,#6561,#12675,#12676));+#12672=ORIENTED_EDGE('',*,*,#12673,.T.);+#12673=EDGE_CURVE('',#6489,#6557,#12674,.T.);+#12674=LINE('',#6490,#451);+#12675=ORIENTED_EDGE('',*,*,#12663,.F.);+#12676=ORIENTED_EDGE('',*,*,#6494,.F.);+#12677=CYLINDRICAL_SURFACE('',#6498,0.1);+#12678=ADVANCED_FACE('',(#12679),#12684,.F.);+#12679=FACE_BOUND('',#12680,.F.);+#12680=EDGE_LOOP('',(#12681,#12682,#6555,#12683));+#12681=ORIENTED_EDGE('',*,*,#6488,.F.);+#12682=ORIENTED_EDGE('',*,*,#10163,.T.);+#12683=ORIENTED_EDGE('',*,*,#12673,.F.);+#12684=PLANE('',#12685);+#12685=AXIS2_PLACEMENT_3D('',#6492,#13,#2378);+#12686=ADVANCED_FACE('',(#12687),#12694,.F.);+#12687=FACE_BOUND('',#12688,.F.);+#12688=EDGE_LOOP('',(#12689,#6753,#12692,#12693));+#12689=ORIENTED_EDGE('',*,*,#12690,.T.);+#12690=EDGE_CURVE('',#6681,#6749,#12691,.T.);+#12691=LINE('',#6682,#451);+#12692=ORIENTED_EDGE('',*,*,#6769,.F.);+#12693=ORIENTED_EDGE('',*,*,#6686,.F.);+#12694=PLANE('',#12695);+#12695=AXIS2_PLACEMENT_3D('',#6682,#10258,#2432);+#12696=ADVANCED_FACE('',(#12697),#12704,.F.);+#12697=FACE_BOUND('',#12698,.F.);+#12698=EDGE_LOOP('',(#12699,#6747,#12702,#12703));+#12699=ORIENTED_EDGE('',*,*,#12700,.T.);+#12700=EDGE_CURVE('',#6676,#6744,#12701,.T.);+#12701=LINE('',#6677,#451);+#12702=ORIENTED_EDGE('',*,*,#12690,.F.);+#12703=ORIENTED_EDGE('',*,*,#6680,.F.);+#12704=CYLINDRICAL_SURFACE('',#12705,1.E-01);+#12705=AXIS2_PLACEMENT_3D('',#6663,#2386,#2425);+#12706=ADVANCED_FACE('',(#12707),#12714,.F.);+#12707=FACE_BOUND('',#12708,.F.);+#12708=EDGE_LOOP('',(#12709,#6742,#12712,#12713));+#12709=ORIENTED_EDGE('',*,*,#12710,.T.);+#12710=EDGE_CURVE('',#6671,#6739,#12711,.T.);+#12711=LINE('',#6672,#451);+#12712=ORIENTED_EDGE('',*,*,#12700,.F.);+#12713=ORIENTED_EDGE('',*,*,#6675,.F.);+#12714=PLANE('',#12715);+#12715=AXIS2_PLACEMENT_3D('',#6672,#464,#408);+#12716=ADVANCED_FACE('',(#12717),#12724,.F.);+#12717=FACE_BOUND('',#12718,.F.);+#12718=EDGE_LOOP('',(#12719,#6737,#12722,#12723));+#12719=ORIENTED_EDGE('',*,*,#12720,.T.);+#12720=EDGE_CURVE('',#6666,#6734,#12721,.T.);+#12721=LINE('',#6667,#451);+#12722=ORIENTED_EDGE('',*,*,#12710,.F.);+#12723=ORIENTED_EDGE('',*,*,#6670,.F.);+#12724=PLANE('',#12725);+#12725=AXIS2_PLACEMENT_3D('',#6667,#408,#13);+#12726=ADVANCED_FACE('',(#12727),#12734,.F.);+#12727=FACE_BOUND('',#12728,.F.);+#12728=EDGE_LOOP('',(#12729,#6732,#12732,#12733));+#12729=ORIENTED_EDGE('',*,*,#12730,.T.);+#12730=EDGE_CURVE('',#6659,#6727,#12731,.T.);+#12731=LINE('',#6660,#451);+#12732=ORIENTED_EDGE('',*,*,#12720,.F.);+#12733=ORIENTED_EDGE('',*,*,#6665,.F.);+#12734=PLANE('',#12735);+#12735=AXIS2_PLACEMENT_3D('',#6660,#13,#2378);+#12736=ADVANCED_FACE('',(#12737),#12744,.T.);+#12737=FACE_BOUND('',#12738,.F.);+#12738=EDGE_LOOP('',(#12739,#6725,#12742,#12743));+#12739=ORIENTED_EDGE('',*,*,#12740,.T.);+#12740=EDGE_CURVE('',#6654,#6722,#12741,.T.);+#12741=LINE('',#6655,#451);+#12742=ORIENTED_EDGE('',*,*,#12730,.F.);+#12743=ORIENTED_EDGE('',*,*,#6658,.F.);+#12744=CYLINDRICAL_SURFACE('',#12745,0.2);+#12745=AXIS2_PLACEMENT_3D('',#6663,#2386,#2402);+#12746=ADVANCED_FACE('',(#12747),#12754,.F.);+#12747=FACE_BOUND('',#12748,.F.);+#12748=EDGE_LOOP('',(#12749,#6720,#12752,#12753));+#12749=ORIENTED_EDGE('',*,*,#12750,.T.);+#12750=EDGE_CURVE('',#6647,#6715,#12751,.T.);+#12751=LINE('',#6648,#451);+#12752=ORIENTED_EDGE('',*,*,#12740,.F.);+#12753=ORIENTED_EDGE('',*,*,#6653,.F.);+#12754=PLANE('',#12755);+#12755=AXIS2_PLACEMENT_3D('',#6648,#10319,#2394);+#12756=ADVANCED_FACE('',(#12757),#12764,.F.);+#12757=FACE_BOUND('',#12758,.F.);+#12758=EDGE_LOOP('',(#12759,#6713,#12762,#12763));+#12759=ORIENTED_EDGE('',*,*,#12760,.T.);+#12760=EDGE_CURVE('',#6641,#6709,#12761,.T.);+#12761=LINE('',#6642,#451);+#12762=ORIENTED_EDGE('',*,*,#12750,.F.);+#12763=ORIENTED_EDGE('',*,*,#6646,.F.);+#12764=CYLINDRICAL_SURFACE('',#6650,0.1);+#12765=ADVANCED_FACE('',(#12766),#12771,.F.);+#12766=FACE_BOUND('',#12767,.F.);+#12767=EDGE_LOOP('',(#12768,#12769,#6707,#12770));+#12768=ORIENTED_EDGE('',*,*,#6640,.F.);+#12769=ORIENTED_EDGE('',*,*,#10160,.T.);+#12770=ORIENTED_EDGE('',*,*,#12760,.F.);+#12771=PLANE('',#12772);+#12772=AXIS2_PLACEMENT_3D('',#6644,#13,#2378);+#12773=ADVANCED_FACE('',(#12774),#12781,.F.);+#12774=FACE_BOUND('',#12775,.F.);+#12775=EDGE_LOOP('',(#12776,#6905,#12779,#12780));+#12776=ORIENTED_EDGE('',*,*,#12777,.T.);+#12777=EDGE_CURVE('',#6833,#6901,#12778,.T.);+#12778=LINE('',#6834,#451);+#12779=ORIENTED_EDGE('',*,*,#6921,.F.);+#12780=ORIENTED_EDGE('',*,*,#6838,.F.);+#12781=PLANE('',#12782);+#12782=AXIS2_PLACEMENT_3D('',#6834,#10258,#2432);+#12783=ADVANCED_FACE('',(#12784),#12791,.F.);+#12784=FACE_BOUND('',#12785,.F.);+#12785=EDGE_LOOP('',(#12786,#6899,#12789,#12790));+#12786=ORIENTED_EDGE('',*,*,#12787,.T.);+#12787=EDGE_CURVE('',#6828,#6896,#12788,.T.);+#12788=LINE('',#6829,#451);+#12789=ORIENTED_EDGE('',*,*,#12777,.F.);+#12790=ORIENTED_EDGE('',*,*,#6832,.F.);+#12791=CYLINDRICAL_SURFACE('',#12792,1.E-01);+#12792=AXIS2_PLACEMENT_3D('',#6815,#2386,#2425);+#12793=ADVANCED_FACE('',(#12794),#12801,.F.);+#12794=FACE_BOUND('',#12795,.F.);+#12795=EDGE_LOOP('',(#12796,#6894,#12799,#12800));+#12796=ORIENTED_EDGE('',*,*,#12797,.T.);+#12797=EDGE_CURVE('',#6823,#6891,#12798,.T.);+#12798=LINE('',#6824,#451);+#12799=ORIENTED_EDGE('',*,*,#12787,.F.);+#12800=ORIENTED_EDGE('',*,*,#6827,.F.);+#12801=PLANE('',#12802);+#12802=AXIS2_PLACEMENT_3D('',#6824,#464,#408);+#12803=ADVANCED_FACE('',(#12804),#12811,.F.);+#12804=FACE_BOUND('',#12805,.F.);+#12805=EDGE_LOOP('',(#12806,#6889,#12809,#12810));+#12806=ORIENTED_EDGE('',*,*,#12807,.T.);+#12807=EDGE_CURVE('',#6818,#6886,#12808,.T.);+#12808=LINE('',#6819,#451);+#12809=ORIENTED_EDGE('',*,*,#12797,.F.);+#12810=ORIENTED_EDGE('',*,*,#6822,.F.);+#12811=PLANE('',#12812);+#12812=AXIS2_PLACEMENT_3D('',#6819,#408,#13);+#12813=ADVANCED_FACE('',(#12814),#12821,.F.);+#12814=FACE_BOUND('',#12815,.F.);+#12815=EDGE_LOOP('',(#12816,#6884,#12819,#12820));+#12816=ORIENTED_EDGE('',*,*,#12817,.T.);+#12817=EDGE_CURVE('',#6811,#6879,#12818,.T.);+#12818=LINE('',#6812,#451);+#12819=ORIENTED_EDGE('',*,*,#12807,.F.);+#12820=ORIENTED_EDGE('',*,*,#6817,.F.);+#12821=PLANE('',#12822);+#12822=AXIS2_PLACEMENT_3D('',#6812,#13,#2378);+#12823=ADVANCED_FACE('',(#12824),#12831,.T.);+#12824=FACE_BOUND('',#12825,.F.);+#12825=EDGE_LOOP('',(#12826,#6877,#12829,#12830));+#12826=ORIENTED_EDGE('',*,*,#12827,.T.);+#12827=EDGE_CURVE('',#6806,#6874,#12828,.T.);+#12828=LINE('',#6807,#451);+#12829=ORIENTED_EDGE('',*,*,#12817,.F.);+#12830=ORIENTED_EDGE('',*,*,#6810,.F.);+#12831=CYLINDRICAL_SURFACE('',#12832,0.2);+#12832=AXIS2_PLACEMENT_3D('',#6815,#2386,#2402);+#12833=ADVANCED_FACE('',(#12834),#12841,.F.);+#12834=FACE_BOUND('',#12835,.F.);+#12835=EDGE_LOOP('',(#12836,#6872,#12839,#12840));+#12836=ORIENTED_EDGE('',*,*,#12837,.T.);+#12837=EDGE_CURVE('',#6799,#6867,#12838,.T.);+#12838=LINE('',#6800,#451);+#12839=ORIENTED_EDGE('',*,*,#12827,.F.);+#12840=ORIENTED_EDGE('',*,*,#6805,.F.);+#12841=PLANE('',#12842);+#12842=AXIS2_PLACEMENT_3D('',#6800,#10319,#2394);+#12843=ADVANCED_FACE('',(#12844),#12851,.F.);+#12844=FACE_BOUND('',#12845,.F.);+#12845=EDGE_LOOP('',(#12846,#6865,#12849,#12850));+#12846=ORIENTED_EDGE('',*,*,#12847,.T.);+#12847=EDGE_CURVE('',#6793,#6861,#12848,.T.);+#12848=LINE('',#6794,#451);+#12849=ORIENTED_EDGE('',*,*,#12837,.F.);+#12850=ORIENTED_EDGE('',*,*,#6798,.F.);+#12851=CYLINDRICAL_SURFACE('',#6802,0.1);+#12852=ADVANCED_FACE('',(#12853),#12858,.F.);+#12853=FACE_BOUND('',#12854,.F.);+#12854=EDGE_LOOP('',(#12855,#12856,#6859,#12857));+#12855=ORIENTED_EDGE('',*,*,#6792,.F.);+#12856=ORIENTED_EDGE('',*,*,#10157,.T.);+#12857=ORIENTED_EDGE('',*,*,#12847,.F.);+#12858=PLANE('',#12859);+#12859=AXIS2_PLACEMENT_3D('',#6796,#13,#2378);+#12860=ADVANCED_FACE('',(#12861),#12868,.F.);+#12861=FACE_BOUND('',#12862,.F.);+#12862=EDGE_LOOP('',(#12863,#7057,#12866,#12867));+#12863=ORIENTED_EDGE('',*,*,#12864,.T.);+#12864=EDGE_CURVE('',#6985,#7053,#12865,.T.);+#12865=LINE('',#6986,#451);+#12866=ORIENTED_EDGE('',*,*,#7073,.F.);+#12867=ORIENTED_EDGE('',*,*,#6990,.F.);+#12868=PLANE('',#12869);+#12869=AXIS2_PLACEMENT_3D('',#6986,#10258,#2432);+#12870=ADVANCED_FACE('',(#12871),#12878,.F.);+#12871=FACE_BOUND('',#12872,.F.);+#12872=EDGE_LOOP('',(#12873,#7051,#12876,#12877));+#12873=ORIENTED_EDGE('',*,*,#12874,.T.);+#12874=EDGE_CURVE('',#6980,#7048,#12875,.T.);+#12875=LINE('',#6981,#451);+#12876=ORIENTED_EDGE('',*,*,#12864,.F.);+#12877=ORIENTED_EDGE('',*,*,#6984,.F.);+#12878=CYLINDRICAL_SURFACE('',#12879,1.E-01);+#12879=AXIS2_PLACEMENT_3D('',#6967,#2386,#2425);+#12880=ADVANCED_FACE('',(#12881),#12888,.F.);+#12881=FACE_BOUND('',#12882,.F.);+#12882=EDGE_LOOP('',(#12883,#7046,#12886,#12887));+#12883=ORIENTED_EDGE('',*,*,#12884,.T.);+#12884=EDGE_CURVE('',#6975,#7043,#12885,.T.);+#12885=LINE('',#6976,#451);+#12886=ORIENTED_EDGE('',*,*,#12874,.F.);+#12887=ORIENTED_EDGE('',*,*,#6979,.F.);+#12888=PLANE('',#12889);+#12889=AXIS2_PLACEMENT_3D('',#6976,#464,#408);+#12890=ADVANCED_FACE('',(#12891),#12898,.F.);+#12891=FACE_BOUND('',#12892,.F.);+#12892=EDGE_LOOP('',(#12893,#7041,#12896,#12897));+#12893=ORIENTED_EDGE('',*,*,#12894,.T.);+#12894=EDGE_CURVE('',#6970,#7038,#12895,.T.);+#12895=LINE('',#6971,#451);+#12896=ORIENTED_EDGE('',*,*,#12884,.F.);+#12897=ORIENTED_EDGE('',*,*,#6974,.F.);+#12898=PLANE('',#12899);+#12899=AXIS2_PLACEMENT_3D('',#6971,#408,#13);+#12900=ADVANCED_FACE('',(#12901),#12908,.F.);+#12901=FACE_BOUND('',#12902,.F.);+#12902=EDGE_LOOP('',(#12903,#7036,#12906,#12907));+#12903=ORIENTED_EDGE('',*,*,#12904,.T.);+#12904=EDGE_CURVE('',#6963,#7031,#12905,.T.);+#12905=LINE('',#6964,#451);+#12906=ORIENTED_EDGE('',*,*,#12894,.F.);+#12907=ORIENTED_EDGE('',*,*,#6969,.F.);+#12908=PLANE('',#12909);+#12909=AXIS2_PLACEMENT_3D('',#6964,#13,#2378);+#12910=ADVANCED_FACE('',(#12911),#12918,.T.);+#12911=FACE_BOUND('',#12912,.F.);+#12912=EDGE_LOOP('',(#12913,#7029,#12916,#12917));+#12913=ORIENTED_EDGE('',*,*,#12914,.T.);+#12914=EDGE_CURVE('',#6958,#7026,#12915,.T.);+#12915=LINE('',#6959,#451);+#12916=ORIENTED_EDGE('',*,*,#12904,.F.);+#12917=ORIENTED_EDGE('',*,*,#6962,.F.);+#12918=CYLINDRICAL_SURFACE('',#12919,0.2);+#12919=AXIS2_PLACEMENT_3D('',#6967,#2386,#2402);+#12920=ADVANCED_FACE('',(#12921),#12928,.F.);+#12921=FACE_BOUND('',#12922,.F.);+#12922=EDGE_LOOP('',(#12923,#7024,#12926,#12927));+#12923=ORIENTED_EDGE('',*,*,#12924,.T.);+#12924=EDGE_CURVE('',#6951,#7019,#12925,.T.);+#12925=LINE('',#6952,#451);+#12926=ORIENTED_EDGE('',*,*,#12914,.F.);+#12927=ORIENTED_EDGE('',*,*,#6957,.F.);+#12928=PLANE('',#12929);+#12929=AXIS2_PLACEMENT_3D('',#6952,#10319,#2394);+#12930=ADVANCED_FACE('',(#12931),#12938,.F.);+#12931=FACE_BOUND('',#12932,.F.);+#12932=EDGE_LOOP('',(#12933,#7017,#12936,#12937));+#12933=ORIENTED_EDGE('',*,*,#12934,.T.);+#12934=EDGE_CURVE('',#6945,#7013,#12935,.T.);+#12935=LINE('',#6946,#451);+#12936=ORIENTED_EDGE('',*,*,#12924,.F.);+#12937=ORIENTED_EDGE('',*,*,#6950,.F.);+#12938=CYLINDRICAL_SURFACE('',#6954,0.1);+#12939=ADVANCED_FACE('',(#12940),#12945,.F.);+#12940=FACE_BOUND('',#12941,.F.);+#12941=EDGE_LOOP('',(#12942,#12943,#7011,#12944));+#12942=ORIENTED_EDGE('',*,*,#6944,.F.);+#12943=ORIENTED_EDGE('',*,*,#10154,.T.);+#12944=ORIENTED_EDGE('',*,*,#12934,.F.);+#12945=PLANE('',#12946);+#12946=AXIS2_PLACEMENT_3D('',#6948,#13,#2378);+#12947=ADVANCED_FACE('',(#12948),#12955,.F.);+#12948=FACE_BOUND('',#12949,.F.);+#12949=EDGE_LOOP('',(#12950,#7209,#12953,#12954));+#12950=ORIENTED_EDGE('',*,*,#12951,.T.);+#12951=EDGE_CURVE('',#7137,#7205,#12952,.T.);+#12952=LINE('',#7138,#451);+#12953=ORIENTED_EDGE('',*,*,#7225,.F.);+#12954=ORIENTED_EDGE('',*,*,#7142,.F.);+#12955=PLANE('',#12956);+#12956=AXIS2_PLACEMENT_3D('',#7138,#10258,#2432);+#12957=ADVANCED_FACE('',(#12958),#12965,.F.);+#12958=FACE_BOUND('',#12959,.F.);+#12959=EDGE_LOOP('',(#12960,#7203,#12963,#12964));+#12960=ORIENTED_EDGE('',*,*,#12961,.T.);+#12961=EDGE_CURVE('',#7132,#7200,#12962,.T.);+#12962=LINE('',#7133,#451);+#12963=ORIENTED_EDGE('',*,*,#12951,.F.);+#12964=ORIENTED_EDGE('',*,*,#7136,.F.);+#12965=CYLINDRICAL_SURFACE('',#12966,1.E-01);+#12966=AXIS2_PLACEMENT_3D('',#7119,#2386,#2425);+#12967=ADVANCED_FACE('',(#12968),#12975,.F.);+#12968=FACE_BOUND('',#12969,.F.);+#12969=EDGE_LOOP('',(#12970,#7198,#12973,#12974));+#12970=ORIENTED_EDGE('',*,*,#12971,.T.);+#12971=EDGE_CURVE('',#7127,#7195,#12972,.T.);+#12972=LINE('',#7128,#451);+#12973=ORIENTED_EDGE('',*,*,#12961,.F.);+#12974=ORIENTED_EDGE('',*,*,#7131,.F.);+#12975=PLANE('',#12976);+#12976=AXIS2_PLACEMENT_3D('',#7128,#464,#408);+#12977=ADVANCED_FACE('',(#12978),#12985,.F.);+#12978=FACE_BOUND('',#12979,.F.);+#12979=EDGE_LOOP('',(#12980,#7193,#12983,#12984));+#12980=ORIENTED_EDGE('',*,*,#12981,.T.);+#12981=EDGE_CURVE('',#7122,#7190,#12982,.T.);+#12982=LINE('',#7123,#451);+#12983=ORIENTED_EDGE('',*,*,#12971,.F.);+#12984=ORIENTED_EDGE('',*,*,#7126,.F.);+#12985=PLANE('',#12986);+#12986=AXIS2_PLACEMENT_3D('',#7123,#408,#13);+#12987=ADVANCED_FACE('',(#12988),#12995,.F.);+#12988=FACE_BOUND('',#12989,.F.);+#12989=EDGE_LOOP('',(#12990,#7188,#12993,#12994));+#12990=ORIENTED_EDGE('',*,*,#12991,.T.);+#12991=EDGE_CURVE('',#7115,#7183,#12992,.T.);+#12992=LINE('',#7116,#451);+#12993=ORIENTED_EDGE('',*,*,#12981,.F.);+#12994=ORIENTED_EDGE('',*,*,#7121,.F.);+#12995=PLANE('',#12996);+#12996=AXIS2_PLACEMENT_3D('',#7116,#13,#2378);+#12997=ADVANCED_FACE('',(#12998),#13005,.T.);+#12998=FACE_BOUND('',#12999,.F.);+#12999=EDGE_LOOP('',(#13000,#7181,#13003,#13004));+#13000=ORIENTED_EDGE('',*,*,#13001,.T.);+#13001=EDGE_CURVE('',#7110,#7178,#13002,.T.);+#13002=LINE('',#7111,#451);+#13003=ORIENTED_EDGE('',*,*,#12991,.F.);+#13004=ORIENTED_EDGE('',*,*,#7114,.F.);+#13005=CYLINDRICAL_SURFACE('',#13006,0.2);+#13006=AXIS2_PLACEMENT_3D('',#7119,#2386,#2402);+#13007=ADVANCED_FACE('',(#13008),#13015,.F.);+#13008=FACE_BOUND('',#13009,.F.);+#13009=EDGE_LOOP('',(#13010,#7176,#13013,#13014));+#13010=ORIENTED_EDGE('',*,*,#13011,.T.);+#13011=EDGE_CURVE('',#7103,#7171,#13012,.T.);+#13012=LINE('',#7104,#451);+#13013=ORIENTED_EDGE('',*,*,#13001,.F.);+#13014=ORIENTED_EDGE('',*,*,#7109,.F.);+#13015=PLANE('',#13016);+#13016=AXIS2_PLACEMENT_3D('',#7104,#10319,#2394);+#13017=ADVANCED_FACE('',(#13018),#13025,.F.);+#13018=FACE_BOUND('',#13019,.F.);+#13019=EDGE_LOOP('',(#13020,#7169,#13023,#13024));+#13020=ORIENTED_EDGE('',*,*,#13021,.T.);+#13021=EDGE_CURVE('',#7097,#7165,#13022,.T.);+#13022=LINE('',#7098,#451);+#13023=ORIENTED_EDGE('',*,*,#13011,.F.);+#13024=ORIENTED_EDGE('',*,*,#7102,.F.);+#13025=CYLINDRICAL_SURFACE('',#7106,0.1);+#13026=ADVANCED_FACE('',(#13027),#13032,.F.);+#13027=FACE_BOUND('',#13028,.F.);+#13028=EDGE_LOOP('',(#13029,#13030,#7163,#13031));+#13029=ORIENTED_EDGE('',*,*,#7096,.F.);+#13030=ORIENTED_EDGE('',*,*,#10151,.T.);+#13031=ORIENTED_EDGE('',*,*,#13021,.F.);+#13032=PLANE('',#13033);+#13033=AXIS2_PLACEMENT_3D('',#7100,#13,#2378);+#13034=ADVANCED_FACE('',(#13035),#13102,.F.);+#13035=FACE_BOUND('',#13036,.F.);+#13036=EDGE_LOOP('',(#13037,#13038,#13044,#13052,#13059,#13067,#13072,#13077,#13082,#13089,#13096,#13101));+#13037=ORIENTED_EDGE('',*,*,#7267,.F.);+#13038=ORIENTED_EDGE('',*,*,#13039,.T.);+#13039=EDGE_CURVE('',#7263,#13040,#13042,.T.);+#13040=VERTEX_POINT('',#13041);+#13041=CARTESIAN_POINT('',(7.2,6.29,0.75));+#13042=LINE('',#13043,#49);+#13043=CARTESIAN_POINT('',(6.85,6.29,0.75));+#13044=ORIENTED_EDGE('',*,*,#13045,.T.);+#13045=EDGE_CURVE('',#13040,#13046,#13048,.T.);+#13046=VERTEX_POINT('',#13047);+#13047=CARTESIAN_POINT('',(7.298480775301,6.29,0.667364817767));+#13048=CIRCLE('',#13049,0.1);+#13049=AXIS2_PLACEMENT_3D('',#13050,#422,#13051);+#13050=CARTESIAN_POINT('',(7.2,6.29,0.65));+#13051=DIRECTION('',(-8.881784197001E-15,-9.860761315263E-31,1.));+#13052=ORIENTED_EDGE('',*,*,#13053,.T.);+#13053=EDGE_CURVE('',#13046,#13054,#13056,.T.);+#13054=VERTEX_POINT('',#13055);+#13055=CARTESIAN_POINT('',(7.382385590716,6.29,0.165270364467));+#13056=LINE('',#13047,#13057);+#13057=VECTOR('',#13058,1.);+#13058=DIRECTION('',(0.16482406317,1.829914699438E-17,-0.986322983713));+#13059=ORIENTED_EDGE('',*,*,#13060,.T.);+#13060=EDGE_CURVE('',#13054,#13061,#13063,.T.);+#13061=VERTEX_POINT('',#13062);+#13062=CARTESIAN_POINT('',(7.579347141319,6.29,1.387778780781E-16));+#13063=CIRCLE('',#13064,0.2);+#13064=AXIS2_PLACEMENT_3D('',#13065,#1569,#13066);+#13065=CARTESIAN_POINT('',(7.579347141319,6.29,0.2));+#13066=DIRECTION('',(-0.984807753012,-1.093356242224E-16,-0.173648177667));+#13067=ORIENTED_EDGE('',*,*,#13068,.T.);+#13068=EDGE_CURVE('',#13061,#13069,#13071,.T.);+#13069=VERTEX_POINT('',#13070);+#13070=CARTESIAN_POINT('',(8.,6.29,1.387778780781E-16));+#13071=LINE('',#13062,#49);+#13072=ORIENTED_EDGE('',*,*,#13073,.T.);+#13073=EDGE_CURVE('',#13069,#13074,#13076,.T.);+#13074=VERTEX_POINT('',#13075);+#13075=CARTESIAN_POINT('',(8.,6.29,0.1));+#13076=LINE('',#13070,#2043);+#13077=ORIENTED_EDGE('',*,*,#13078,.T.);+#13078=EDGE_CURVE('',#13074,#13079,#13081,.T.);+#13079=VERTEX_POINT('',#13080);+#13080=CARTESIAN_POINT('',(7.579347141319,6.29,0.1));+#13081=LINE('',#13075,#1576);+#13082=ORIENTED_EDGE('',*,*,#13083,.T.);+#13083=EDGE_CURVE('',#13079,#13084,#13086,.T.);+#13084=VERTEX_POINT('',#13085);+#13085=CARTESIAN_POINT('',(7.480866366018,6.29,0.182635182233));+#13086=CIRCLE('',#13087,1.E-01);+#13087=AXIS2_PLACEMENT_3D('',#13065,#422,#13088);+#13088=DIRECTION('',(8.881784197001E-15,9.860761315263E-31,-1.));+#13089=ORIENTED_EDGE('',*,*,#13090,.T.);+#13090=EDGE_CURVE('',#13084,#13091,#13093,.T.);+#13091=VERTEX_POINT('',#13092);+#13092=CARTESIAN_POINT('',(7.396961550602,6.29,0.684729635533));+#13093=LINE('',#13085,#13094);+#13094=VECTOR('',#13095,1.);+#13095=DIRECTION('',(-0.16482406317,-1.829914699438E-17,0.986322983713));+#13096=ORIENTED_EDGE('',*,*,#13097,.T.);+#13097=EDGE_CURVE('',#13091,#7236,#13098,.T.);+#13098=CIRCLE('',#13099,0.2);+#13099=AXIS2_PLACEMENT_3D('',#13050,#1569,#13100);+#13100=DIRECTION('',(0.984807753012,1.093356242224E-16,0.173648177667));+#13101=ORIENTED_EDGE('',*,*,#7235,.T.);+#13102=PLANE('',#13103);+#13103=AXIS2_PLACEMENT_3D('',#13104,#1569,#13);+#13104=CARTESIAN_POINT('',(7.414276639233,6.29,0.410238158856));+#13105=ADVANCED_FACE('',(#13106),#13169,.T.);+#13106=FACE_BOUND('',#13107,.T.);+#13107=EDGE_LOOP('',(#13108,#13114,#13120,#13127,#13132,#13139,#13144,#13149,#13154,#13160,#13165,#7242));+#13108=ORIENTED_EDGE('',*,*,#13109,.F.);+#13109=EDGE_CURVE('',#13110,#7244,#13112,.T.);+#13110=VERTEX_POINT('',#13111);+#13111=CARTESIAN_POINT('',(7.,6.11,0.75));+#13112=LINE('',#13113,#2043);+#13113=CARTESIAN_POINT('',(7.,6.11,0.630119079428));+#13114=ORIENTED_EDGE('',*,*,#13115,.T.);+#13115=EDGE_CURVE('',#13110,#13116,#13118,.T.);+#13116=VERTEX_POINT('',#13117);+#13117=CARTESIAN_POINT('',(7.2,6.11,0.75));+#13118=LINE('',#13119,#49);+#13119=CARTESIAN_POINT('',(6.85,6.11,0.75));+#13120=ORIENTED_EDGE('',*,*,#13121,.T.);+#13121=EDGE_CURVE('',#13116,#13122,#13124,.T.);+#13122=VERTEX_POINT('',#13123);+#13123=CARTESIAN_POINT('',(7.298480775301,6.11,0.667364817767));+#13124=CIRCLE('',#13125,0.1);+#13125=AXIS2_PLACEMENT_3D('',#13126,#422,#13051);+#13126=CARTESIAN_POINT('',(7.2,6.11,0.65));+#13127=ORIENTED_EDGE('',*,*,#13128,.T.);+#13128=EDGE_CURVE('',#13122,#13129,#13131,.T.);+#13129=VERTEX_POINT('',#13130);+#13130=CARTESIAN_POINT('',(7.382385590716,6.11,0.165270364467));+#13131=LINE('',#13123,#13057);+#13132=ORIENTED_EDGE('',*,*,#13133,.T.);+#13133=EDGE_CURVE('',#13129,#13134,#13136,.T.);+#13134=VERTEX_POINT('',#13135);+#13135=CARTESIAN_POINT('',(7.579347141319,6.11,1.387778780781E-16));+#13136=CIRCLE('',#13137,0.2);+#13137=AXIS2_PLACEMENT_3D('',#13138,#1569,#13066);+#13138=CARTESIAN_POINT('',(7.579347141319,6.11,0.2));+#13139=ORIENTED_EDGE('',*,*,#13140,.T.);+#13140=EDGE_CURVE('',#13134,#13141,#13143,.T.);+#13141=VERTEX_POINT('',#13142);+#13142=CARTESIAN_POINT('',(8.,6.11,1.387778780781E-16));+#13143=LINE('',#13135,#49);+#13144=ORIENTED_EDGE('',*,*,#13145,.T.);+#13145=EDGE_CURVE('',#13141,#13146,#13148,.T.);+#13146=VERTEX_POINT('',#13147);+#13147=CARTESIAN_POINT('',(8.,6.11,0.1));+#13148=LINE('',#13142,#2043);+#13149=ORIENTED_EDGE('',*,*,#13150,.T.);+#13150=EDGE_CURVE('',#13146,#13151,#13153,.T.);+#13151=VERTEX_POINT('',#13152);+#13152=CARTESIAN_POINT('',(7.579347141319,6.11,0.1));+#13153=LINE('',#13147,#1576);+#13154=ORIENTED_EDGE('',*,*,#13155,.T.);+#13155=EDGE_CURVE('',#13151,#13156,#13158,.T.);+#13156=VERTEX_POINT('',#13157);+#13157=CARTESIAN_POINT('',(7.480866366018,6.11,0.182635182233));+#13158=CIRCLE('',#13159,1.E-01);+#13159=AXIS2_PLACEMENT_3D('',#13138,#422,#13088);+#13160=ORIENTED_EDGE('',*,*,#13161,.T.);+#13161=EDGE_CURVE('',#13156,#13162,#13164,.T.);+#13162=VERTEX_POINT('',#13163);+#13163=CARTESIAN_POINT('',(7.396961550602,6.11,0.684729635533));+#13164=LINE('',#13157,#13094);+#13165=ORIENTED_EDGE('',*,*,#13166,.T.);+#13166=EDGE_CURVE('',#13162,#7239,#13167,.T.);+#13167=CIRCLE('',#13168,0.2);+#13168=AXIS2_PLACEMENT_3D('',#13126,#1569,#13100);+#13169=PLANE('',#13170);+#13170=AXIS2_PLACEMENT_3D('',#13171,#1569,#13);+#13171=CARTESIAN_POINT('',(7.414276639233,6.11,0.410238158856));+#13172=ADVANCED_FACE('',(#13173),#13180,.T.);+#13173=FACE_BOUND('',#13174,.F.);+#13174=EDGE_LOOP('',(#13175,#13165,#13178,#13179));+#13175=ORIENTED_EDGE('',*,*,#13176,.T.);+#13176=EDGE_CURVE('',#13091,#13162,#13177,.T.);+#13177=LINE('',#13092,#1568);+#13178=ORIENTED_EDGE('',*,*,#7238,.F.);+#13179=ORIENTED_EDGE('',*,*,#13097,.F.);+#13180=CYLINDRICAL_SURFACE('',#13181,0.2);+#13181=AXIS2_PLACEMENT_3D('',#13050,#422,#13100);+#13182=ADVANCED_FACE('',(#13183),#13453,.F.);+#13183=FACE_BOUND('',#13184,.F.);+#13184=EDGE_LOOP('',(#13185,#13192,#13197,#13201,#13205,#13209,#13213,#13217,#13221,#13225,#13229,#13233,#13237,#13241,#13245,#13249,#13253,#13257,#13261,#13265,#13269,#13273,#13277,#13281,#13285,#13289,#13293,#13297,#13301,#13305,#13309,#13313,#13317,#13321,#13325,#13329,#13333,#13337,#13341,#13345,#13349,#13353,#13357,#13361,#13365,#13369,#13373,#13377,#13381,#13385,#13389,#13393,#13397,#13401,#13405,#13409,#13413,#13417,#13421,#13425,#13429,#13433,#13437,#13441,#13445,#13447,#13449,#13450));+#13185=ORIENTED_EDGE('',*,*,#13186,.T.);+#13186=EDGE_CURVE('',#13187,#13189,#13191,.T.);+#13187=VERTEX_POINT('',#13188);+#13188=CARTESIAN_POINT('',(6.861838234914,6.755919117457,0.1));+#13189=VERTEX_POINT('',#13190);+#13190=CARTESIAN_POINT('',(6.861838234914,-6.755919117457,0.1));+#13191=LINE('',#13188,#1568);+#13192=ORIENTED_EDGE('',*,*,#13193,.T.);+#13193=EDGE_CURVE('',#13189,#13194,#13196,.T.);+#13194=VERTEX_POINT('',#13195);+#13195=CARTESIAN_POINT('',(7.,-6.825,0.75));+#13196=B_SPLINE_CURVE_WITH_KNOTS('',1,(#13190,#13195),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13197=ORIENTED_EDGE('',*,*,#13198,.F.);+#13198=EDGE_CURVE('',#13199,#13194,#7265,.T.);+#13199=VERTEX_POINT('',#13200);+#13200=CARTESIAN_POINT('',(7.,-6.29,0.75));+#13201=ORIENTED_EDGE('',*,*,#13202,.F.);+#13202=EDGE_CURVE('',#13203,#13199,#7265,.T.);+#13203=VERTEX_POINT('',#13204);+#13204=CARTESIAN_POINT('',(7.,-6.11,0.75));+#13205=ORIENTED_EDGE('',*,*,#13206,.F.);+#13206=EDGE_CURVE('',#13207,#13203,#7265,.T.);+#13207=VERTEX_POINT('',#13208);+#13208=CARTESIAN_POINT('',(7.,-5.89,0.75));+#13209=ORIENTED_EDGE('',*,*,#13210,.F.);+#13210=EDGE_CURVE('',#13211,#13207,#7265,.T.);+#13211=VERTEX_POINT('',#13212);+#13212=CARTESIAN_POINT('',(7.,-5.71,0.75));+#13213=ORIENTED_EDGE('',*,*,#13214,.F.);+#13214=EDGE_CURVE('',#13215,#13211,#7265,.T.);+#13215=VERTEX_POINT('',#13216);+#13216=CARTESIAN_POINT('',(7.,-5.49,0.75));+#13217=ORIENTED_EDGE('',*,*,#13218,.F.);+#13218=EDGE_CURVE('',#13219,#13215,#7265,.T.);+#13219=VERTEX_POINT('',#13220);+#13220=CARTESIAN_POINT('',(7.,-5.31,0.75));+#13221=ORIENTED_EDGE('',*,*,#13222,.F.);+#13222=EDGE_CURVE('',#13223,#13219,#7265,.T.);+#13223=VERTEX_POINT('',#13224);+#13224=CARTESIAN_POINT('',(7.,-5.09,0.75));+#13225=ORIENTED_EDGE('',*,*,#13226,.F.);+#13226=EDGE_CURVE('',#13227,#13223,#7265,.T.);+#13227=VERTEX_POINT('',#13228);+#13228=CARTESIAN_POINT('',(7.,-4.91,0.75));+#13229=ORIENTED_EDGE('',*,*,#13230,.F.);+#13230=EDGE_CURVE('',#13231,#13227,#7265,.T.);+#13231=VERTEX_POINT('',#13232);+#13232=CARTESIAN_POINT('',(7.,-4.69,0.75));+#13233=ORIENTED_EDGE('',*,*,#13234,.F.);+#13234=EDGE_CURVE('',#13235,#13231,#7265,.T.);+#13235=VERTEX_POINT('',#13236);+#13236=CARTESIAN_POINT('',(7.,-4.51,0.75));+#13237=ORIENTED_EDGE('',*,*,#13238,.F.);+#13238=EDGE_CURVE('',#13239,#13235,#7265,.T.);+#13239=VERTEX_POINT('',#13240);+#13240=CARTESIAN_POINT('',(7.,-4.29,0.75));+#13241=ORIENTED_EDGE('',*,*,#13242,.F.);+#13242=EDGE_CURVE('',#13243,#13239,#7265,.T.);+#13243=VERTEX_POINT('',#13244);+#13244=CARTESIAN_POINT('',(7.,-4.11,0.75));+#13245=ORIENTED_EDGE('',*,*,#13246,.F.);+#13246=EDGE_CURVE('',#13247,#13243,#7265,.T.);+#13247=VERTEX_POINT('',#13248);+#13248=CARTESIAN_POINT('',(7.,-3.89,0.75));+#13249=ORIENTED_EDGE('',*,*,#13250,.F.);+#13250=EDGE_CURVE('',#13251,#13247,#7265,.T.);+#13251=VERTEX_POINT('',#13252);+#13252=CARTESIAN_POINT('',(7.,-3.71,0.75));+#13253=ORIENTED_EDGE('',*,*,#13254,.F.);+#13254=EDGE_CURVE('',#13255,#13251,#7265,.T.);+#13255=VERTEX_POINT('',#13256);+#13256=CARTESIAN_POINT('',(7.,-3.49,0.75));+#13257=ORIENTED_EDGE('',*,*,#13258,.F.);+#13258=EDGE_CURVE('',#13259,#13255,#7265,.T.);+#13259=VERTEX_POINT('',#13260);+#13260=CARTESIAN_POINT('',(7.,-3.31,0.75));+#13261=ORIENTED_EDGE('',*,*,#13262,.F.);+#13262=EDGE_CURVE('',#13263,#13259,#7265,.T.);+#13263=VERTEX_POINT('',#13264);+#13264=CARTESIAN_POINT('',(7.,-3.09,0.75));+#13265=ORIENTED_EDGE('',*,*,#13266,.F.);+#13266=EDGE_CURVE('',#13267,#13263,#7265,.T.);+#13267=VERTEX_POINT('',#13268);+#13268=CARTESIAN_POINT('',(7.,-2.91,0.75));+#13269=ORIENTED_EDGE('',*,*,#13270,.F.);+#13270=EDGE_CURVE('',#13271,#13267,#7265,.T.);+#13271=VERTEX_POINT('',#13272);+#13272=CARTESIAN_POINT('',(7.,-2.69,0.75));+#13273=ORIENTED_EDGE('',*,*,#13274,.F.);+#13274=EDGE_CURVE('',#13275,#13271,#7265,.T.);+#13275=VERTEX_POINT('',#13276);+#13276=CARTESIAN_POINT('',(7.,-2.51,0.75));+#13277=ORIENTED_EDGE('',*,*,#13278,.F.);+#13278=EDGE_CURVE('',#13279,#13275,#7265,.T.);+#13279=VERTEX_POINT('',#13280);+#13280=CARTESIAN_POINT('',(7.,-2.29,0.75));+#13281=ORIENTED_EDGE('',*,*,#13282,.F.);+#13282=EDGE_CURVE('',#13283,#13279,#7265,.T.);+#13283=VERTEX_POINT('',#13284);+#13284=CARTESIAN_POINT('',(7.,-2.11,0.75));+#13285=ORIENTED_EDGE('',*,*,#13286,.F.);+#13286=EDGE_CURVE('',#13287,#13283,#7265,.T.);+#13287=VERTEX_POINT('',#13288);+#13288=CARTESIAN_POINT('',(7.,-1.89,0.75));+#13289=ORIENTED_EDGE('',*,*,#13290,.F.);+#13290=EDGE_CURVE('',#13291,#13287,#7265,.T.);+#13291=VERTEX_POINT('',#13292);+#13292=CARTESIAN_POINT('',(7.,-1.71,0.75));+#13293=ORIENTED_EDGE('',*,*,#13294,.F.);+#13294=EDGE_CURVE('',#13295,#13291,#7265,.T.);+#13295=VERTEX_POINT('',#13296);+#13296=CARTESIAN_POINT('',(7.,-1.49,0.75));+#13297=ORIENTED_EDGE('',*,*,#13298,.F.);+#13298=EDGE_CURVE('',#13299,#13295,#7265,.T.);+#13299=VERTEX_POINT('',#13300);+#13300=CARTESIAN_POINT('',(7.,-1.31,0.75));+#13301=ORIENTED_EDGE('',*,*,#13302,.F.);+#13302=EDGE_CURVE('',#13303,#13299,#7265,.T.);+#13303=VERTEX_POINT('',#13304);+#13304=CARTESIAN_POINT('',(7.,-1.09,0.75));+#13305=ORIENTED_EDGE('',*,*,#13306,.F.);+#13306=EDGE_CURVE('',#13307,#13303,#7265,.T.);+#13307=VERTEX_POINT('',#13308);+#13308=CARTESIAN_POINT('',(7.,-0.91,0.75));+#13309=ORIENTED_EDGE('',*,*,#13310,.F.);+#13310=EDGE_CURVE('',#13311,#13307,#7265,.T.);+#13311=VERTEX_POINT('',#13312);+#13312=CARTESIAN_POINT('',(7.,-0.69,0.75));+#13313=ORIENTED_EDGE('',*,*,#13314,.F.);+#13314=EDGE_CURVE('',#13315,#13311,#7265,.T.);+#13315=VERTEX_POINT('',#13316);+#13316=CARTESIAN_POINT('',(7.,-0.51,0.75));+#13317=ORIENTED_EDGE('',*,*,#13318,.F.);+#13318=EDGE_CURVE('',#13319,#13315,#7265,.T.);+#13319=VERTEX_POINT('',#13320);+#13320=CARTESIAN_POINT('',(7.,-0.29,0.75));+#13321=ORIENTED_EDGE('',*,*,#13322,.F.);+#13322=EDGE_CURVE('',#13323,#13319,#7265,.T.);+#13323=VERTEX_POINT('',#13324);+#13324=CARTESIAN_POINT('',(7.,-0.11,0.75));+#13325=ORIENTED_EDGE('',*,*,#13326,.F.);+#13326=EDGE_CURVE('',#13327,#13323,#7265,.T.);+#13327=VERTEX_POINT('',#13328);+#13328=CARTESIAN_POINT('',(7.,0.11,0.75));+#13329=ORIENTED_EDGE('',*,*,#13330,.F.);+#13330=EDGE_CURVE('',#13331,#13327,#7265,.T.);+#13331=VERTEX_POINT('',#13332);+#13332=CARTESIAN_POINT('',(7.,0.29,0.75));+#13333=ORIENTED_EDGE('',*,*,#13334,.F.);+#13334=EDGE_CURVE('',#13335,#13331,#7265,.T.);+#13335=VERTEX_POINT('',#13336);+#13336=CARTESIAN_POINT('',(7.,0.51,0.75));+#13337=ORIENTED_EDGE('',*,*,#13338,.F.);+#13338=EDGE_CURVE('',#13339,#13335,#7265,.T.);+#13339=VERTEX_POINT('',#13340);+#13340=CARTESIAN_POINT('',(7.,0.69,0.75));+#13341=ORIENTED_EDGE('',*,*,#13342,.F.);+#13342=EDGE_CURVE('',#13343,#13339,#7265,.T.);+#13343=VERTEX_POINT('',#13344);+#13344=CARTESIAN_POINT('',(7.,0.91,0.75));+#13345=ORIENTED_EDGE('',*,*,#13346,.F.);+#13346=EDGE_CURVE('',#13347,#13343,#7265,.T.);+#13347=VERTEX_POINT('',#13348);+#13348=CARTESIAN_POINT('',(7.,1.09,0.75));+#13349=ORIENTED_EDGE('',*,*,#13350,.F.);+#13350=EDGE_CURVE('',#13351,#13347,#7265,.T.);+#13351=VERTEX_POINT('',#13352);+#13352=CARTESIAN_POINT('',(7.,1.31,0.75));+#13353=ORIENTED_EDGE('',*,*,#13354,.F.);+#13354=EDGE_CURVE('',#13355,#13351,#7265,.T.);+#13355=VERTEX_POINT('',#13356);+#13356=CARTESIAN_POINT('',(7.,1.49,0.75));+#13357=ORIENTED_EDGE('',*,*,#13358,.F.);+#13358=EDGE_CURVE('',#13359,#13355,#7265,.T.);+#13359=VERTEX_POINT('',#13360);+#13360=CARTESIAN_POINT('',(7.,1.71,0.75));+#13361=ORIENTED_EDGE('',*,*,#13362,.F.);+#13362=EDGE_CURVE('',#13363,#13359,#7265,.T.);+#13363=VERTEX_POINT('',#13364);+#13364=CARTESIAN_POINT('',(7.,1.89,0.75));+#13365=ORIENTED_EDGE('',*,*,#13366,.F.);+#13366=EDGE_CURVE('',#13367,#13363,#7265,.T.);+#13367=VERTEX_POINT('',#13368);+#13368=CARTESIAN_POINT('',(7.,2.11,0.75));+#13369=ORIENTED_EDGE('',*,*,#13370,.F.);+#13370=EDGE_CURVE('',#13371,#13367,#7265,.T.);+#13371=VERTEX_POINT('',#13372);+#13372=CARTESIAN_POINT('',(7.,2.29,0.75));+#13373=ORIENTED_EDGE('',*,*,#13374,.F.);+#13374=EDGE_CURVE('',#13375,#13371,#7265,.T.);+#13375=VERTEX_POINT('',#13376);+#13376=CARTESIAN_POINT('',(7.,2.51,0.75));+#13377=ORIENTED_EDGE('',*,*,#13378,.F.);+#13378=EDGE_CURVE('',#13379,#13375,#7265,.T.);+#13379=VERTEX_POINT('',#13380);+#13380=CARTESIAN_POINT('',(7.,2.69,0.75));+#13381=ORIENTED_EDGE('',*,*,#13382,.F.);+#13382=EDGE_CURVE('',#13383,#13379,#7265,.T.);+#13383=VERTEX_POINT('',#13384);+#13384=CARTESIAN_POINT('',(7.,2.91,0.75));+#13385=ORIENTED_EDGE('',*,*,#13386,.F.);+#13386=EDGE_CURVE('',#13387,#13383,#7265,.T.);+#13387=VERTEX_POINT('',#13388);+#13388=CARTESIAN_POINT('',(7.,3.09,0.75));+#13389=ORIENTED_EDGE('',*,*,#13390,.F.);+#13390=EDGE_CURVE('',#13391,#13387,#7265,.T.);+#13391=VERTEX_POINT('',#13392);+#13392=CARTESIAN_POINT('',(7.,3.31,0.75));+#13393=ORIENTED_EDGE('',*,*,#13394,.F.);+#13394=EDGE_CURVE('',#13395,#13391,#7265,.T.);+#13395=VERTEX_POINT('',#13396);+#13396=CARTESIAN_POINT('',(7.,3.49,0.75));+#13397=ORIENTED_EDGE('',*,*,#13398,.F.);+#13398=EDGE_CURVE('',#13399,#13395,#7265,.T.);+#13399=VERTEX_POINT('',#13400);+#13400=CARTESIAN_POINT('',(7.,3.71,0.75));+#13401=ORIENTED_EDGE('',*,*,#13402,.F.);+#13402=EDGE_CURVE('',#13403,#13399,#7265,.T.);+#13403=VERTEX_POINT('',#13404);+#13404=CARTESIAN_POINT('',(7.,3.89,0.75));+#13405=ORIENTED_EDGE('',*,*,#13406,.F.);+#13406=EDGE_CURVE('',#13407,#13403,#7265,.T.);+#13407=VERTEX_POINT('',#13408);+#13408=CARTESIAN_POINT('',(7.,4.11,0.75));+#13409=ORIENTED_EDGE('',*,*,#13410,.F.);+#13410=EDGE_CURVE('',#13411,#13407,#7265,.T.);+#13411=VERTEX_POINT('',#13412);+#13412=CARTESIAN_POINT('',(7.,4.29,0.75));+#13413=ORIENTED_EDGE('',*,*,#13414,.F.);+#13414=EDGE_CURVE('',#13415,#13411,#7265,.T.);+#13415=VERTEX_POINT('',#13416);+#13416=CARTESIAN_POINT('',(7.,4.51,0.75));+#13417=ORIENTED_EDGE('',*,*,#13418,.F.);+#13418=EDGE_CURVE('',#13419,#13415,#7265,.T.);+#13419=VERTEX_POINT('',#13420);+#13420=CARTESIAN_POINT('',(7.,4.69,0.75));+#13421=ORIENTED_EDGE('',*,*,#13422,.F.);+#13422=EDGE_CURVE('',#13423,#13419,#7265,.T.);+#13423=VERTEX_POINT('',#13424);+#13424=CARTESIAN_POINT('',(7.,4.91,0.75));+#13425=ORIENTED_EDGE('',*,*,#13426,.F.);+#13426=EDGE_CURVE('',#13427,#13423,#7265,.T.);+#13427=VERTEX_POINT('',#13428);+#13428=CARTESIAN_POINT('',(7.,5.09,0.75));+#13429=ORIENTED_EDGE('',*,*,#13430,.F.);+#13430=EDGE_CURVE('',#13431,#13427,#7265,.T.);+#13431=VERTEX_POINT('',#13432);+#13432=CARTESIAN_POINT('',(7.,5.31,0.75));+#13433=ORIENTED_EDGE('',*,*,#13434,.F.);+#13434=EDGE_CURVE('',#13435,#13431,#7265,.T.);+#13435=VERTEX_POINT('',#13436);+#13436=CARTESIAN_POINT('',(7.,5.49,0.75));+#13437=ORIENTED_EDGE('',*,*,#13438,.F.);+#13438=EDGE_CURVE('',#13439,#13435,#7265,.T.);+#13439=VERTEX_POINT('',#13440);+#13440=CARTESIAN_POINT('',(7.,5.71,0.75));+#13441=ORIENTED_EDGE('',*,*,#13442,.F.);+#13442=EDGE_CURVE('',#13443,#13439,#7265,.T.);+#13443=VERTEX_POINT('',#13444);+#13444=CARTESIAN_POINT('',(7.,5.89,0.75));+#13445=ORIENTED_EDGE('',*,*,#13446,.F.);+#13446=EDGE_CURVE('',#13110,#13443,#7265,.T.);+#13447=ORIENTED_EDGE('',*,*,#13448,.F.);+#13448=EDGE_CURVE('',#7263,#13110,#7265,.T.);+#13449=ORIENTED_EDGE('',*,*,#7262,.F.);+#13450=ORIENTED_EDGE('',*,*,#13451,.F.);+#13451=EDGE_CURVE('',#13187,#7258,#13452,.T.);+#13452=B_SPLINE_CURVE_WITH_KNOTS('',1,(#13188,#7259),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13453=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#13188,#7259),(#13190,#13195)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,13.65),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13454=ADVANCED_FACE('',(#13455),#13463,.F.);+#13455=FACE_BOUND('',#13456,.F.);+#13456=EDGE_LOOP('',(#13457,#13460,#13461,#13462));+#13457=ORIENTED_EDGE('',*,*,#13458,.T.);+#13458=EDGE_CURVE('',#10143,#13187,#13459,.T.);+#13459=LINE('',#10144,#329);+#13460=ORIENTED_EDGE('',*,*,#13451,.T.);+#13461=ORIENTED_EDGE('',*,*,#7277,.F.);+#13462=ORIENTED_EDGE('',*,*,#10147,.F.);+#13463=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#10144,#7279),(#13188,#7259)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13464=ADVANCED_FACE('',(#13465),#13721,.F.);+#13465=FACE_BOUND('',#13466,.F.);+#13466=EDGE_LOOP('',(#13467,#8555,#13468,#13469,#13470,#13474,#13478,#13482,#13486,#13490,#13494,#13498,#13502,#13506,#13510,#13514,#13518,#13522,#13526,#13530,#13534,#13538,#13542,#13546,#13550,#13554,#13558,#13562,#13566,#13570,#13574,#13578,#13582,#13586,#13590,#13594,#13598,#13602,#13606,#13610,#13614,#13618,#13622,#13626,#13630,#13634,#13638,#13642,#13646,#13650,#13654,#13658,#13662,#13666,#13670,#13674,#13678,#13682,#13686,#13690,#13694,#13698,#13702,#13706,#13710,#13714,#13718,#13720));+#13467=ORIENTED_EDGE('',*,*,#10133,.T.);+#13468=ORIENTED_EDGE('',*,*,#7300,.F.);+#13469=ORIENTED_EDGE('',*,*,#8461,.T.);+#13470=ORIENTED_EDGE('',*,*,#13471,.T.);+#13471=EDGE_CURVE('',#8454,#13472,#8462,.T.);+#13472=VERTEX_POINT('',#13473);+#13473=CARTESIAN_POINT('',(6.11,-6.925,0.85));+#13474=ORIENTED_EDGE('',*,*,#13475,.T.);+#13475=EDGE_CURVE('',#13472,#13476,#8462,.T.);+#13476=VERTEX_POINT('',#13477);+#13477=CARTESIAN_POINT('',(5.89,-6.925,0.85));+#13478=ORIENTED_EDGE('',*,*,#13479,.T.);+#13479=EDGE_CURVE('',#13476,#13480,#8462,.T.);+#13480=VERTEX_POINT('',#13481);+#13481=CARTESIAN_POINT('',(5.71,-6.925,0.85));+#13482=ORIENTED_EDGE('',*,*,#13483,.T.);+#13483=EDGE_CURVE('',#13480,#13484,#8462,.T.);+#13484=VERTEX_POINT('',#13485);+#13485=CARTESIAN_POINT('',(5.49,-6.925,0.85));+#13486=ORIENTED_EDGE('',*,*,#13487,.T.);+#13487=EDGE_CURVE('',#13484,#13488,#8462,.T.);+#13488=VERTEX_POINT('',#13489);+#13489=CARTESIAN_POINT('',(5.31,-6.925,0.85));+#13490=ORIENTED_EDGE('',*,*,#13491,.T.);+#13491=EDGE_CURVE('',#13488,#13492,#8462,.T.);+#13492=VERTEX_POINT('',#13493);+#13493=CARTESIAN_POINT('',(5.09,-6.925,0.85));+#13494=ORIENTED_EDGE('',*,*,#13495,.T.);+#13495=EDGE_CURVE('',#13492,#13496,#8462,.T.);+#13496=VERTEX_POINT('',#13497);+#13497=CARTESIAN_POINT('',(4.91,-6.925,0.85));+#13498=ORIENTED_EDGE('',*,*,#13499,.T.);+#13499=EDGE_CURVE('',#13496,#13500,#8462,.T.);+#13500=VERTEX_POINT('',#13501);+#13501=CARTESIAN_POINT('',(4.69,-6.925,0.85));+#13502=ORIENTED_EDGE('',*,*,#13503,.T.);+#13503=EDGE_CURVE('',#13500,#13504,#8462,.T.);+#13504=VERTEX_POINT('',#13505);+#13505=CARTESIAN_POINT('',(4.51,-6.925,0.85));+#13506=ORIENTED_EDGE('',*,*,#13507,.T.);+#13507=EDGE_CURVE('',#13504,#13508,#8462,.T.);+#13508=VERTEX_POINT('',#13509);+#13509=CARTESIAN_POINT('',(4.29,-6.925,0.85));+#13510=ORIENTED_EDGE('',*,*,#13511,.T.);+#13511=EDGE_CURVE('',#13508,#13512,#8462,.T.);+#13512=VERTEX_POINT('',#13513);+#13513=CARTESIAN_POINT('',(4.11,-6.925,0.85));+#13514=ORIENTED_EDGE('',*,*,#13515,.T.);+#13515=EDGE_CURVE('',#13512,#13516,#8462,.T.);+#13516=VERTEX_POINT('',#13517);+#13517=CARTESIAN_POINT('',(3.89,-6.925,0.85));+#13518=ORIENTED_EDGE('',*,*,#13519,.T.);+#13519=EDGE_CURVE('',#13516,#13520,#8462,.T.);+#13520=VERTEX_POINT('',#13521);+#13521=CARTESIAN_POINT('',(3.71,-6.925,0.85));+#13522=ORIENTED_EDGE('',*,*,#13523,.T.);+#13523=EDGE_CURVE('',#13520,#13524,#8462,.T.);+#13524=VERTEX_POINT('',#13525);+#13525=CARTESIAN_POINT('',(3.49,-6.925,0.85));+#13526=ORIENTED_EDGE('',*,*,#13527,.T.);+#13527=EDGE_CURVE('',#13524,#13528,#8462,.T.);+#13528=VERTEX_POINT('',#13529);+#13529=CARTESIAN_POINT('',(3.31,-6.925,0.85));+#13530=ORIENTED_EDGE('',*,*,#13531,.T.);+#13531=EDGE_CURVE('',#13528,#13532,#8462,.T.);+#13532=VERTEX_POINT('',#13533);+#13533=CARTESIAN_POINT('',(3.09,-6.925,0.85));+#13534=ORIENTED_EDGE('',*,*,#13535,.T.);+#13535=EDGE_CURVE('',#13532,#13536,#8462,.T.);+#13536=VERTEX_POINT('',#13537);+#13537=CARTESIAN_POINT('',(2.91,-6.925,0.85));+#13538=ORIENTED_EDGE('',*,*,#13539,.T.);+#13539=EDGE_CURVE('',#13536,#13540,#8462,.T.);+#13540=VERTEX_POINT('',#13541);+#13541=CARTESIAN_POINT('',(2.69,-6.925,0.85));+#13542=ORIENTED_EDGE('',*,*,#13543,.T.);+#13543=EDGE_CURVE('',#13540,#13544,#8462,.T.);+#13544=VERTEX_POINT('',#13545);+#13545=CARTESIAN_POINT('',(2.51,-6.925,0.85));+#13546=ORIENTED_EDGE('',*,*,#13547,.T.);+#13547=EDGE_CURVE('',#13544,#13548,#8462,.T.);+#13548=VERTEX_POINT('',#13549);+#13549=CARTESIAN_POINT('',(2.29,-6.925,0.85));+#13550=ORIENTED_EDGE('',*,*,#13551,.T.);+#13551=EDGE_CURVE('',#13548,#13552,#8462,.T.);+#13552=VERTEX_POINT('',#13553);+#13553=CARTESIAN_POINT('',(2.11,-6.925,0.85));+#13554=ORIENTED_EDGE('',*,*,#13555,.T.);+#13555=EDGE_CURVE('',#13552,#13556,#8462,.T.);+#13556=VERTEX_POINT('',#13557);+#13557=CARTESIAN_POINT('',(1.89,-6.925,0.85));+#13558=ORIENTED_EDGE('',*,*,#13559,.T.);+#13559=EDGE_CURVE('',#13556,#13560,#8462,.T.);+#13560=VERTEX_POINT('',#13561);+#13561=CARTESIAN_POINT('',(1.71,-6.925,0.85));+#13562=ORIENTED_EDGE('',*,*,#13563,.T.);+#13563=EDGE_CURVE('',#13560,#13564,#8462,.T.);+#13564=VERTEX_POINT('',#13565);+#13565=CARTESIAN_POINT('',(1.49,-6.925,0.85));+#13566=ORIENTED_EDGE('',*,*,#13567,.T.);+#13567=EDGE_CURVE('',#13564,#13568,#8462,.T.);+#13568=VERTEX_POINT('',#13569);+#13569=CARTESIAN_POINT('',(1.31,-6.925,0.85));+#13570=ORIENTED_EDGE('',*,*,#13571,.T.);+#13571=EDGE_CURVE('',#13568,#13572,#8462,.T.);+#13572=VERTEX_POINT('',#13573);+#13573=CARTESIAN_POINT('',(1.09,-6.925,0.85));+#13574=ORIENTED_EDGE('',*,*,#13575,.T.);+#13575=EDGE_CURVE('',#13572,#13576,#8462,.T.);+#13576=VERTEX_POINT('',#13577);+#13577=CARTESIAN_POINT('',(0.91,-6.925,0.85));+#13578=ORIENTED_EDGE('',*,*,#13579,.T.);+#13579=EDGE_CURVE('',#13576,#13580,#8462,.T.);+#13580=VERTEX_POINT('',#13581);+#13581=CARTESIAN_POINT('',(0.69,-6.925,0.85));+#13582=ORIENTED_EDGE('',*,*,#13583,.T.);+#13583=EDGE_CURVE('',#13580,#13584,#8462,.T.);+#13584=VERTEX_POINT('',#13585);+#13585=CARTESIAN_POINT('',(0.51,-6.925,0.85));+#13586=ORIENTED_EDGE('',*,*,#13587,.T.);+#13587=EDGE_CURVE('',#13584,#13588,#8462,.T.);+#13588=VERTEX_POINT('',#13589);+#13589=CARTESIAN_POINT('',(0.29,-6.925,0.85));+#13590=ORIENTED_EDGE('',*,*,#13591,.T.);+#13591=EDGE_CURVE('',#13588,#13592,#8462,.T.);+#13592=VERTEX_POINT('',#13593);+#13593=CARTESIAN_POINT('',(0.11,-6.925,0.85));+#13594=ORIENTED_EDGE('',*,*,#13595,.T.);+#13595=EDGE_CURVE('',#13592,#13596,#8462,.T.);+#13596=VERTEX_POINT('',#13597);+#13597=CARTESIAN_POINT('',(-0.11,-6.925,0.85));+#13598=ORIENTED_EDGE('',*,*,#13599,.T.);+#13599=EDGE_CURVE('',#13596,#13600,#8462,.T.);+#13600=VERTEX_POINT('',#13601);+#13601=CARTESIAN_POINT('',(-0.29,-6.925,0.85));+#13602=ORIENTED_EDGE('',*,*,#13603,.T.);+#13603=EDGE_CURVE('',#13600,#13604,#8462,.T.);+#13604=VERTEX_POINT('',#13605);+#13605=CARTESIAN_POINT('',(-0.51,-6.925,0.85));+#13606=ORIENTED_EDGE('',*,*,#13607,.T.);+#13607=EDGE_CURVE('',#13604,#13608,#8462,.T.);+#13608=VERTEX_POINT('',#13609);+#13609=CARTESIAN_POINT('',(-0.69,-6.925,0.85));+#13610=ORIENTED_EDGE('',*,*,#13611,.T.);+#13611=EDGE_CURVE('',#13608,#13612,#8462,.T.);+#13612=VERTEX_POINT('',#13613);+#13613=CARTESIAN_POINT('',(-0.91,-6.925,0.85));+#13614=ORIENTED_EDGE('',*,*,#13615,.T.);+#13615=EDGE_CURVE('',#13612,#13616,#8462,.T.);+#13616=VERTEX_POINT('',#13617);+#13617=CARTESIAN_POINT('',(-1.09,-6.925,0.85));+#13618=ORIENTED_EDGE('',*,*,#13619,.T.);+#13619=EDGE_CURVE('',#13616,#13620,#8462,.T.);+#13620=VERTEX_POINT('',#13621);+#13621=CARTESIAN_POINT('',(-1.31,-6.925,0.85));+#13622=ORIENTED_EDGE('',*,*,#13623,.T.);+#13623=EDGE_CURVE('',#13620,#13624,#8462,.T.);+#13624=VERTEX_POINT('',#13625);+#13625=CARTESIAN_POINT('',(-1.49,-6.925,0.85));+#13626=ORIENTED_EDGE('',*,*,#13627,.T.);+#13627=EDGE_CURVE('',#13624,#13628,#8462,.T.);+#13628=VERTEX_POINT('',#13629);+#13629=CARTESIAN_POINT('',(-1.71,-6.925,0.85));+#13630=ORIENTED_EDGE('',*,*,#13631,.T.);+#13631=EDGE_CURVE('',#13628,#13632,#8462,.T.);+#13632=VERTEX_POINT('',#13633);+#13633=CARTESIAN_POINT('',(-1.89,-6.925,0.85));+#13634=ORIENTED_EDGE('',*,*,#13635,.T.);+#13635=EDGE_CURVE('',#13632,#13636,#8462,.T.);+#13636=VERTEX_POINT('',#13637);+#13637=CARTESIAN_POINT('',(-2.11,-6.925,0.85));+#13638=ORIENTED_EDGE('',*,*,#13639,.T.);+#13639=EDGE_CURVE('',#13636,#13640,#8462,.T.);+#13640=VERTEX_POINT('',#13641);+#13641=CARTESIAN_POINT('',(-2.29,-6.925,0.85));+#13642=ORIENTED_EDGE('',*,*,#13643,.T.);+#13643=EDGE_CURVE('',#13640,#13644,#8462,.T.);+#13644=VERTEX_POINT('',#13645);+#13645=CARTESIAN_POINT('',(-2.51,-6.925,0.85));+#13646=ORIENTED_EDGE('',*,*,#13647,.T.);+#13647=EDGE_CURVE('',#13644,#13648,#8462,.T.);+#13648=VERTEX_POINT('',#13649);+#13649=CARTESIAN_POINT('',(-2.69,-6.925,0.85));+#13650=ORIENTED_EDGE('',*,*,#13651,.T.);+#13651=EDGE_CURVE('',#13648,#13652,#8462,.T.);+#13652=VERTEX_POINT('',#13653);+#13653=CARTESIAN_POINT('',(-2.91,-6.925,0.85));+#13654=ORIENTED_EDGE('',*,*,#13655,.T.);+#13655=EDGE_CURVE('',#13652,#13656,#8462,.T.);+#13656=VERTEX_POINT('',#13657);+#13657=CARTESIAN_POINT('',(-3.09,-6.925,0.85));+#13658=ORIENTED_EDGE('',*,*,#13659,.T.);+#13659=EDGE_CURVE('',#13656,#13660,#8462,.T.);+#13660=VERTEX_POINT('',#13661);+#13661=CARTESIAN_POINT('',(-3.31,-6.925,0.85));+#13662=ORIENTED_EDGE('',*,*,#13663,.T.);+#13663=EDGE_CURVE('',#13660,#13664,#8462,.T.);+#13664=VERTEX_POINT('',#13665);+#13665=CARTESIAN_POINT('',(-3.49,-6.925,0.85));+#13666=ORIENTED_EDGE('',*,*,#13667,.T.);+#13667=EDGE_CURVE('',#13664,#13668,#8462,.T.);+#13668=VERTEX_POINT('',#13669);+#13669=CARTESIAN_POINT('',(-3.71,-6.925,0.85));+#13670=ORIENTED_EDGE('',*,*,#13671,.T.);+#13671=EDGE_CURVE('',#13668,#13672,#8462,.T.);+#13672=VERTEX_POINT('',#13673);+#13673=CARTESIAN_POINT('',(-3.89,-6.925,0.85));+#13674=ORIENTED_EDGE('',*,*,#13675,.T.);+#13675=EDGE_CURVE('',#13672,#13676,#8462,.T.);+#13676=VERTEX_POINT('',#13677);+#13677=CARTESIAN_POINT('',(-4.11,-6.925,0.85));+#13678=ORIENTED_EDGE('',*,*,#13679,.T.);+#13679=EDGE_CURVE('',#13676,#13680,#8462,.T.);+#13680=VERTEX_POINT('',#13681);+#13681=CARTESIAN_POINT('',(-4.29,-6.925,0.85));+#13682=ORIENTED_EDGE('',*,*,#13683,.T.);+#13683=EDGE_CURVE('',#13680,#13684,#8462,.T.);+#13684=VERTEX_POINT('',#13685);+#13685=CARTESIAN_POINT('',(-4.51,-6.925,0.85));+#13686=ORIENTED_EDGE('',*,*,#13687,.T.);+#13687=EDGE_CURVE('',#13684,#13688,#8462,.T.);+#13688=VERTEX_POINT('',#13689);+#13689=CARTESIAN_POINT('',(-4.69,-6.925,0.85));+#13690=ORIENTED_EDGE('',*,*,#13691,.T.);+#13691=EDGE_CURVE('',#13688,#13692,#8462,.T.);+#13692=VERTEX_POINT('',#13693);+#13693=CARTESIAN_POINT('',(-4.91,-6.925,0.85));+#13694=ORIENTED_EDGE('',*,*,#13695,.T.);+#13695=EDGE_CURVE('',#13692,#13696,#8462,.T.);+#13696=VERTEX_POINT('',#13697);+#13697=CARTESIAN_POINT('',(-5.09,-6.925,0.85));+#13698=ORIENTED_EDGE('',*,*,#13699,.T.);+#13699=EDGE_CURVE('',#13696,#13700,#8462,.T.);+#13700=VERTEX_POINT('',#13701);+#13701=CARTESIAN_POINT('',(-5.31,-6.925,0.85));+#13702=ORIENTED_EDGE('',*,*,#13703,.T.);+#13703=EDGE_CURVE('',#13700,#13704,#8462,.T.);+#13704=VERTEX_POINT('',#13705);+#13705=CARTESIAN_POINT('',(-5.49,-6.925,0.85));+#13706=ORIENTED_EDGE('',*,*,#13707,.T.);+#13707=EDGE_CURVE('',#13704,#13708,#8462,.T.);+#13708=VERTEX_POINT('',#13709);+#13709=CARTESIAN_POINT('',(-5.71,-6.925,0.85));+#13710=ORIENTED_EDGE('',*,*,#13711,.T.);+#13711=EDGE_CURVE('',#13708,#13712,#8462,.T.);+#13712=VERTEX_POINT('',#13713);+#13713=CARTESIAN_POINT('',(-5.89,-6.925,0.85));+#13714=ORIENTED_EDGE('',*,*,#13715,.T.);+#13715=EDGE_CURVE('',#13712,#13716,#8462,.T.);+#13716=VERTEX_POINT('',#13717);+#13717=CARTESIAN_POINT('',(-6.11,-6.925,0.85));+#13718=ORIENTED_EDGE('',*,*,#13719,.T.);+#13719=EDGE_CURVE('',#13716,#9046,#8462,.T.);+#13720=ORIENTED_EDGE('',*,*,#9045,.T.);+#13721=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#7302,#7306),(#9040,#10135)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,13.575),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13722=ADVANCED_FACE('',(#13723),#7271,.F.);+#13723=FACE_BOUND('',#13724,.F.);+#13724=EDGE_LOOP('',(#13108,#13725,#13726,#13730));+#13725=ORIENTED_EDGE('',*,*,#13446,.T.);+#13726=ORIENTED_EDGE('',*,*,#13727,.T.);+#13727=EDGE_CURVE('',#13443,#7355,#13728,.T.);+#13728=LINE('',#13729,#2043);+#13729=CARTESIAN_POINT('',(7.,5.89,0.630119079428));+#13730=ORIENTED_EDGE('',*,*,#7354,.F.);+#13731=ADVANCED_FACE('',(#13732),#13791,.F.);+#13732=FACE_BOUND('',#13733,.F.);+#13733=EDGE_LOOP('',(#13734,#13735,#13741,#13748,#13753,#13760,#13765,#13770,#13775,#13781,#13786,#13790));+#13734=ORIENTED_EDGE('',*,*,#13727,.F.);+#13735=ORIENTED_EDGE('',*,*,#13736,.T.);+#13736=EDGE_CURVE('',#13443,#13737,#13739,.T.);+#13737=VERTEX_POINT('',#13738);+#13738=CARTESIAN_POINT('',(7.2,5.89,0.75));+#13739=LINE('',#13740,#49);+#13740=CARTESIAN_POINT('',(6.85,5.89,0.75));+#13741=ORIENTED_EDGE('',*,*,#13742,.T.);+#13742=EDGE_CURVE('',#13737,#13743,#13745,.T.);+#13743=VERTEX_POINT('',#13744);+#13744=CARTESIAN_POINT('',(7.298480775301,5.89,0.667364817767));+#13745=CIRCLE('',#13746,0.1);+#13746=AXIS2_PLACEMENT_3D('',#13747,#422,#13051);+#13747=CARTESIAN_POINT('',(7.2,5.89,0.65));+#13748=ORIENTED_EDGE('',*,*,#13749,.T.);+#13749=EDGE_CURVE('',#13743,#13750,#13752,.T.);+#13750=VERTEX_POINT('',#13751);+#13751=CARTESIAN_POINT('',(7.382385590716,5.89,0.165270364467));+#13752=LINE('',#13744,#13057);+#13753=ORIENTED_EDGE('',*,*,#13754,.T.);+#13754=EDGE_CURVE('',#13750,#13755,#13757,.T.);+#13755=VERTEX_POINT('',#13756);+#13756=CARTESIAN_POINT('',(7.579347141319,5.89,1.387778780781E-16));+#13757=CIRCLE('',#13758,0.2);+#13758=AXIS2_PLACEMENT_3D('',#13759,#1569,#13066);+#13759=CARTESIAN_POINT('',(7.579347141319,5.89,0.2));+#13760=ORIENTED_EDGE('',*,*,#13761,.T.);+#13761=EDGE_CURVE('',#13755,#13762,#13764,.T.);+#13762=VERTEX_POINT('',#13763);+#13763=CARTESIAN_POINT('',(8.,5.89,1.387778780781E-16));+#13764=LINE('',#13756,#49);+#13765=ORIENTED_EDGE('',*,*,#13766,.T.);+#13766=EDGE_CURVE('',#13762,#13767,#13769,.T.);+#13767=VERTEX_POINT('',#13768);+#13768=CARTESIAN_POINT('',(8.,5.89,0.1));+#13769=LINE('',#13763,#2043);+#13770=ORIENTED_EDGE('',*,*,#13771,.T.);+#13771=EDGE_CURVE('',#13767,#13772,#13774,.T.);+#13772=VERTEX_POINT('',#13773);+#13773=CARTESIAN_POINT('',(7.579347141319,5.89,0.1));+#13774=LINE('',#13768,#1576);+#13775=ORIENTED_EDGE('',*,*,#13776,.T.);+#13776=EDGE_CURVE('',#13772,#13777,#13779,.T.);+#13777=VERTEX_POINT('',#13778);+#13778=CARTESIAN_POINT('',(7.480866366018,5.89,0.182635182233));+#13779=CIRCLE('',#13780,1.E-01);+#13780=AXIS2_PLACEMENT_3D('',#13759,#422,#13088);+#13781=ORIENTED_EDGE('',*,*,#13782,.T.);+#13782=EDGE_CURVE('',#13777,#13783,#13785,.T.);+#13783=VERTEX_POINT('',#13784);+#13784=CARTESIAN_POINT('',(7.396961550602,5.89,0.684729635533));+#13785=LINE('',#13778,#13094);+#13786=ORIENTED_EDGE('',*,*,#13787,.T.);+#13787=EDGE_CURVE('',#13783,#7367,#13788,.T.);+#13788=CIRCLE('',#13789,0.2);+#13789=AXIS2_PLACEMENT_3D('',#13747,#1569,#13100);+#13790=ORIENTED_EDGE('',*,*,#7366,.T.);+#13791=PLANE('',#13792);+#13792=AXIS2_PLACEMENT_3D('',#13793,#1569,#13);+#13793=CARTESIAN_POINT('',(7.414276639233,5.89,0.410238158856));+#13794=ADVANCED_FACE('',(#13795),#13856,.T.);+#13795=FACE_BOUND('',#13796,.T.);+#13796=EDGE_LOOP('',(#13797,#13801,#13807,#13814,#13819,#13826,#13831,#13836,#13841,#13847,#13852,#7373));+#13797=ORIENTED_EDGE('',*,*,#13798,.F.);+#13798=EDGE_CURVE('',#13439,#7375,#13799,.T.);+#13799=LINE('',#13800,#2043);+#13800=CARTESIAN_POINT('',(7.,5.71,0.630119079428));+#13801=ORIENTED_EDGE('',*,*,#13802,.T.);+#13802=EDGE_CURVE('',#13439,#13803,#13805,.T.);+#13803=VERTEX_POINT('',#13804);+#13804=CARTESIAN_POINT('',(7.2,5.71,0.75));+#13805=LINE('',#13806,#49);+#13806=CARTESIAN_POINT('',(6.85,5.71,0.75));+#13807=ORIENTED_EDGE('',*,*,#13808,.T.);+#13808=EDGE_CURVE('',#13803,#13809,#13811,.T.);+#13809=VERTEX_POINT('',#13810);+#13810=CARTESIAN_POINT('',(7.298480775301,5.71,0.667364817767));+#13811=CIRCLE('',#13812,0.1);+#13812=AXIS2_PLACEMENT_3D('',#13813,#422,#13051);+#13813=CARTESIAN_POINT('',(7.2,5.71,0.65));+#13814=ORIENTED_EDGE('',*,*,#13815,.T.);+#13815=EDGE_CURVE('',#13809,#13816,#13818,.T.);+#13816=VERTEX_POINT('',#13817);+#13817=CARTESIAN_POINT('',(7.382385590716,5.71,0.165270364467));+#13818=LINE('',#13810,#13057);+#13819=ORIENTED_EDGE('',*,*,#13820,.T.);+#13820=EDGE_CURVE('',#13816,#13821,#13823,.T.);+#13821=VERTEX_POINT('',#13822);+#13822=CARTESIAN_POINT('',(7.579347141319,5.71,1.387778780781E-16));+#13823=CIRCLE('',#13824,0.2);+#13824=AXIS2_PLACEMENT_3D('',#13825,#1569,#13066);+#13825=CARTESIAN_POINT('',(7.579347141319,5.71,0.2));+#13826=ORIENTED_EDGE('',*,*,#13827,.T.);+#13827=EDGE_CURVE('',#13821,#13828,#13830,.T.);+#13828=VERTEX_POINT('',#13829);+#13829=CARTESIAN_POINT('',(8.,5.71,1.387778780781E-16));+#13830=LINE('',#13822,#49);+#13831=ORIENTED_EDGE('',*,*,#13832,.T.);+#13832=EDGE_CURVE('',#13828,#13833,#13835,.T.);+#13833=VERTEX_POINT('',#13834);+#13834=CARTESIAN_POINT('',(8.,5.71,0.1));+#13835=LINE('',#13829,#2043);+#13836=ORIENTED_EDGE('',*,*,#13837,.T.);+#13837=EDGE_CURVE('',#13833,#13838,#13840,.T.);+#13838=VERTEX_POINT('',#13839);+#13839=CARTESIAN_POINT('',(7.579347141319,5.71,0.1));+#13840=LINE('',#13834,#1576);+#13841=ORIENTED_EDGE('',*,*,#13842,.T.);+#13842=EDGE_CURVE('',#13838,#13843,#13845,.T.);+#13843=VERTEX_POINT('',#13844);+#13844=CARTESIAN_POINT('',(7.480866366018,5.71,0.182635182233));+#13845=CIRCLE('',#13846,1.E-01);+#13846=AXIS2_PLACEMENT_3D('',#13825,#422,#13088);+#13847=ORIENTED_EDGE('',*,*,#13848,.T.);+#13848=EDGE_CURVE('',#13843,#13849,#13851,.T.);+#13849=VERTEX_POINT('',#13850);+#13850=CARTESIAN_POINT('',(7.396961550602,5.71,0.684729635533));+#13851=LINE('',#13844,#13094);+#13852=ORIENTED_EDGE('',*,*,#13853,.T.);+#13853=EDGE_CURVE('',#13849,#7370,#13854,.T.);+#13854=CIRCLE('',#13855,0.2);+#13855=AXIS2_PLACEMENT_3D('',#13813,#1569,#13100);+#13856=PLANE('',#13857);+#13857=AXIS2_PLACEMENT_3D('',#13858,#1569,#13);+#13858=CARTESIAN_POINT('',(7.414276639233,5.71,0.410238158856));+#13859=ADVANCED_FACE('',(#13860),#13867,.T.);+#13860=FACE_BOUND('',#13861,.F.);+#13861=EDGE_LOOP('',(#13862,#13852,#13865,#13866));+#13862=ORIENTED_EDGE('',*,*,#13863,.T.);+#13863=EDGE_CURVE('',#13783,#13849,#13864,.T.);+#13864=LINE('',#13784,#1568);+#13865=ORIENTED_EDGE('',*,*,#7369,.F.);+#13866=ORIENTED_EDGE('',*,*,#13787,.F.);+#13867=CYLINDRICAL_SURFACE('',#13868,0.2);+#13868=AXIS2_PLACEMENT_3D('',#13747,#422,#13100);+#13869=ADVANCED_FACE('',(#13870),#7271,.F.);+#13870=FACE_BOUND('',#13871,.F.);+#13871=EDGE_LOOP('',(#13797,#13872,#13873,#13877));+#13872=ORIENTED_EDGE('',*,*,#13438,.T.);+#13873=ORIENTED_EDGE('',*,*,#13874,.T.);+#13874=EDGE_CURVE('',#13435,#7390,#13875,.T.);+#13875=LINE('',#13876,#2043);+#13876=CARTESIAN_POINT('',(7.,5.49,0.630119079428));+#13877=ORIENTED_EDGE('',*,*,#7389,.F.);+#13878=ADVANCED_FACE('',(#13879),#13938,.F.);+#13879=FACE_BOUND('',#13880,.F.);+#13880=EDGE_LOOP('',(#13881,#13882,#13888,#13895,#13900,#13907,#13912,#13917,#13922,#13928,#13933,#13937));+#13881=ORIENTED_EDGE('',*,*,#13874,.F.);+#13882=ORIENTED_EDGE('',*,*,#13883,.T.);+#13883=EDGE_CURVE('',#13435,#13884,#13886,.T.);+#13884=VERTEX_POINT('',#13885);+#13885=CARTESIAN_POINT('',(7.2,5.49,0.75));+#13886=LINE('',#13887,#49);+#13887=CARTESIAN_POINT('',(6.85,5.49,0.75));+#13888=ORIENTED_EDGE('',*,*,#13889,.T.);+#13889=EDGE_CURVE('',#13884,#13890,#13892,.T.);+#13890=VERTEX_POINT('',#13891);+#13891=CARTESIAN_POINT('',(7.298480775301,5.49,0.667364817767));+#13892=CIRCLE('',#13893,0.1);+#13893=AXIS2_PLACEMENT_3D('',#13894,#422,#13051);+#13894=CARTESIAN_POINT('',(7.2,5.49,0.65));+#13895=ORIENTED_EDGE('',*,*,#13896,.T.);+#13896=EDGE_CURVE('',#13890,#13897,#13899,.T.);+#13897=VERTEX_POINT('',#13898);+#13898=CARTESIAN_POINT('',(7.382385590716,5.49,0.165270364467));+#13899=LINE('',#13891,#13057);+#13900=ORIENTED_EDGE('',*,*,#13901,.T.);+#13901=EDGE_CURVE('',#13897,#13902,#13904,.T.);+#13902=VERTEX_POINT('',#13903);+#13903=CARTESIAN_POINT('',(7.579347141319,5.49,1.387778780781E-16));+#13904=CIRCLE('',#13905,0.2);+#13905=AXIS2_PLACEMENT_3D('',#13906,#1569,#13066);+#13906=CARTESIAN_POINT('',(7.579347141319,5.49,0.2));+#13907=ORIENTED_EDGE('',*,*,#13908,.T.);+#13908=EDGE_CURVE('',#13902,#13909,#13911,.T.);+#13909=VERTEX_POINT('',#13910);+#13910=CARTESIAN_POINT('',(8.,5.49,1.387778780781E-16));+#13911=LINE('',#13903,#49);+#13912=ORIENTED_EDGE('',*,*,#13913,.T.);+#13913=EDGE_CURVE('',#13909,#13914,#13916,.T.);+#13914=VERTEX_POINT('',#13915);+#13915=CARTESIAN_POINT('',(8.,5.49,0.1));+#13916=LINE('',#13910,#2043);+#13917=ORIENTED_EDGE('',*,*,#13918,.T.);+#13918=EDGE_CURVE('',#13914,#13919,#13921,.T.);+#13919=VERTEX_POINT('',#13920);+#13920=CARTESIAN_POINT('',(7.579347141319,5.49,0.1));+#13921=LINE('',#13915,#1576);+#13922=ORIENTED_EDGE('',*,*,#13923,.T.);+#13923=EDGE_CURVE('',#13919,#13924,#13926,.T.);+#13924=VERTEX_POINT('',#13925);+#13925=CARTESIAN_POINT('',(7.480866366018,5.49,0.182635182233));+#13926=CIRCLE('',#13927,1.E-01);+#13927=AXIS2_PLACEMENT_3D('',#13906,#422,#13088);+#13928=ORIENTED_EDGE('',*,*,#13929,.T.);+#13929=EDGE_CURVE('',#13924,#13930,#13932,.T.);+#13930=VERTEX_POINT('',#13931);+#13931=CARTESIAN_POINT('',(7.396961550602,5.49,0.684729635533));+#13932=LINE('',#13925,#13094);+#13933=ORIENTED_EDGE('',*,*,#13934,.T.);+#13934=EDGE_CURVE('',#13930,#7402,#13935,.T.);+#13935=CIRCLE('',#13936,0.2);+#13936=AXIS2_PLACEMENT_3D('',#13894,#1569,#13100);+#13937=ORIENTED_EDGE('',*,*,#7401,.T.);+#13938=PLANE('',#13939);+#13939=AXIS2_PLACEMENT_3D('',#13940,#1569,#13);+#13940=CARTESIAN_POINT('',(7.414276639233,5.49,0.410238158856));+#13941=ADVANCED_FACE('',(#13942),#14003,.T.);+#13942=FACE_BOUND('',#13943,.T.);+#13943=EDGE_LOOP('',(#13944,#13948,#13954,#13961,#13966,#13973,#13978,#13983,#13988,#13994,#13999,#7408));+#13944=ORIENTED_EDGE('',*,*,#13945,.F.);+#13945=EDGE_CURVE('',#13431,#7410,#13946,.T.);+#13946=LINE('',#13947,#2043);+#13947=CARTESIAN_POINT('',(7.,5.31,0.630119079428));+#13948=ORIENTED_EDGE('',*,*,#13949,.T.);+#13949=EDGE_CURVE('',#13431,#13950,#13952,.T.);+#13950=VERTEX_POINT('',#13951);+#13951=CARTESIAN_POINT('',(7.2,5.31,0.75));+#13952=LINE('',#13953,#49);+#13953=CARTESIAN_POINT('',(6.85,5.31,0.75));+#13954=ORIENTED_EDGE('',*,*,#13955,.T.);+#13955=EDGE_CURVE('',#13950,#13956,#13958,.T.);+#13956=VERTEX_POINT('',#13957);+#13957=CARTESIAN_POINT('',(7.298480775301,5.31,0.667364817767));+#13958=CIRCLE('',#13959,0.1);+#13959=AXIS2_PLACEMENT_3D('',#13960,#422,#13051);+#13960=CARTESIAN_POINT('',(7.2,5.31,0.65));+#13961=ORIENTED_EDGE('',*,*,#13962,.T.);+#13962=EDGE_CURVE('',#13956,#13963,#13965,.T.);+#13963=VERTEX_POINT('',#13964);+#13964=CARTESIAN_POINT('',(7.382385590716,5.31,0.165270364467));+#13965=LINE('',#13957,#13057);+#13966=ORIENTED_EDGE('',*,*,#13967,.T.);+#13967=EDGE_CURVE('',#13963,#13968,#13970,.T.);+#13968=VERTEX_POINT('',#13969);+#13969=CARTESIAN_POINT('',(7.579347141319,5.31,1.387778780781E-16));+#13970=CIRCLE('',#13971,0.2);+#13971=AXIS2_PLACEMENT_3D('',#13972,#1569,#13066);+#13972=CARTESIAN_POINT('',(7.579347141319,5.31,0.2));+#13973=ORIENTED_EDGE('',*,*,#13974,.T.);+#13974=EDGE_CURVE('',#13968,#13975,#13977,.T.);+#13975=VERTEX_POINT('',#13976);+#13976=CARTESIAN_POINT('',(8.,5.31,1.387778780781E-16));+#13977=LINE('',#13969,#49);+#13978=ORIENTED_EDGE('',*,*,#13979,.T.);+#13979=EDGE_CURVE('',#13975,#13980,#13982,.T.);+#13980=VERTEX_POINT('',#13981);+#13981=CARTESIAN_POINT('',(8.,5.31,0.1));+#13982=LINE('',#13976,#2043);+#13983=ORIENTED_EDGE('',*,*,#13984,.T.);+#13984=EDGE_CURVE('',#13980,#13985,#13987,.T.);+#13985=VERTEX_POINT('',#13986);+#13986=CARTESIAN_POINT('',(7.579347141319,5.31,0.1));+#13987=LINE('',#13981,#1576);+#13988=ORIENTED_EDGE('',*,*,#13989,.T.);+#13989=EDGE_CURVE('',#13985,#13990,#13992,.T.);+#13990=VERTEX_POINT('',#13991);+#13991=CARTESIAN_POINT('',(7.480866366018,5.31,0.182635182233));+#13992=CIRCLE('',#13993,1.E-01);+#13993=AXIS2_PLACEMENT_3D('',#13972,#422,#13088);+#13994=ORIENTED_EDGE('',*,*,#13995,.T.);+#13995=EDGE_CURVE('',#13990,#13996,#13998,.T.);+#13996=VERTEX_POINT('',#13997);+#13997=CARTESIAN_POINT('',(7.396961550602,5.31,0.684729635533));+#13998=LINE('',#13991,#13094);+#13999=ORIENTED_EDGE('',*,*,#14000,.T.);+#14000=EDGE_CURVE('',#13996,#7405,#14001,.T.);+#14001=CIRCLE('',#14002,0.2);+#14002=AXIS2_PLACEMENT_3D('',#13960,#1569,#13100);+#14003=PLANE('',#14004);+#14004=AXIS2_PLACEMENT_3D('',#14005,#1569,#13);+#14005=CARTESIAN_POINT('',(7.414276639233,5.31,0.410238158856));+#14006=ADVANCED_FACE('',(#14007),#14014,.T.);+#14007=FACE_BOUND('',#14008,.F.);+#14008=EDGE_LOOP('',(#14009,#13999,#14012,#14013));+#14009=ORIENTED_EDGE('',*,*,#14010,.T.);+#14010=EDGE_CURVE('',#13930,#13996,#14011,.T.);+#14011=LINE('',#13931,#1568);+#14012=ORIENTED_EDGE('',*,*,#7404,.F.);+#14013=ORIENTED_EDGE('',*,*,#13934,.F.);+#14014=CYLINDRICAL_SURFACE('',#14015,0.2);+#14015=AXIS2_PLACEMENT_3D('',#13894,#422,#13100);+#14016=ADVANCED_FACE('',(#14017),#7271,.F.);+#14017=FACE_BOUND('',#14018,.F.);+#14018=EDGE_LOOP('',(#13944,#14019,#14020,#14024));+#14019=ORIENTED_EDGE('',*,*,#13430,.T.);+#14020=ORIENTED_EDGE('',*,*,#14021,.T.);+#14021=EDGE_CURVE('',#13427,#7425,#14022,.T.);+#14022=LINE('',#14023,#2043);+#14023=CARTESIAN_POINT('',(7.,5.09,0.630119079428));+#14024=ORIENTED_EDGE('',*,*,#7424,.F.);+#14025=ADVANCED_FACE('',(#14026),#14085,.F.);+#14026=FACE_BOUND('',#14027,.F.);+#14027=EDGE_LOOP('',(#14028,#14029,#14035,#14042,#14047,#14054,#14059,#14064,#14069,#14075,#14080,#14084));+#14028=ORIENTED_EDGE('',*,*,#14021,.F.);+#14029=ORIENTED_EDGE('',*,*,#14030,.T.);+#14030=EDGE_CURVE('',#13427,#14031,#14033,.T.);+#14031=VERTEX_POINT('',#14032);+#14032=CARTESIAN_POINT('',(7.2,5.09,0.75));+#14033=LINE('',#14034,#49);+#14034=CARTESIAN_POINT('',(6.85,5.09,0.75));+#14035=ORIENTED_EDGE('',*,*,#14036,.T.);+#14036=EDGE_CURVE('',#14031,#14037,#14039,.T.);+#14037=VERTEX_POINT('',#14038);+#14038=CARTESIAN_POINT('',(7.298480775301,5.09,0.667364817767));+#14039=CIRCLE('',#14040,0.1);+#14040=AXIS2_PLACEMENT_3D('',#14041,#422,#13051);+#14041=CARTESIAN_POINT('',(7.2,5.09,0.65));+#14042=ORIENTED_EDGE('',*,*,#14043,.T.);+#14043=EDGE_CURVE('',#14037,#14044,#14046,.T.);+#14044=VERTEX_POINT('',#14045);+#14045=CARTESIAN_POINT('',(7.382385590716,5.09,0.165270364467));+#14046=LINE('',#14038,#13057);+#14047=ORIENTED_EDGE('',*,*,#14048,.T.);+#14048=EDGE_CURVE('',#14044,#14049,#14051,.T.);+#14049=VERTEX_POINT('',#14050);+#14050=CARTESIAN_POINT('',(7.579347141319,5.09,1.387778780781E-16));+#14051=CIRCLE('',#14052,0.2);+#14052=AXIS2_PLACEMENT_3D('',#14053,#1569,#13066);+#14053=CARTESIAN_POINT('',(7.579347141319,5.09,0.2));+#14054=ORIENTED_EDGE('',*,*,#14055,.T.);+#14055=EDGE_CURVE('',#14049,#14056,#14058,.T.);+#14056=VERTEX_POINT('',#14057);+#14057=CARTESIAN_POINT('',(8.,5.09,1.387778780781E-16));+#14058=LINE('',#14050,#49);+#14059=ORIENTED_EDGE('',*,*,#14060,.T.);+#14060=EDGE_CURVE('',#14056,#14061,#14063,.T.);+#14061=VERTEX_POINT('',#14062);+#14062=CARTESIAN_POINT('',(8.,5.09,0.1));+#14063=LINE('',#14057,#2043);+#14064=ORIENTED_EDGE('',*,*,#14065,.T.);+#14065=EDGE_CURVE('',#14061,#14066,#14068,.T.);+#14066=VERTEX_POINT('',#14067);+#14067=CARTESIAN_POINT('',(7.579347141319,5.09,0.1));+#14068=LINE('',#14062,#1576);+#14069=ORIENTED_EDGE('',*,*,#14070,.T.);+#14070=EDGE_CURVE('',#14066,#14071,#14073,.T.);+#14071=VERTEX_POINT('',#14072);+#14072=CARTESIAN_POINT('',(7.480866366018,5.09,0.182635182233));+#14073=CIRCLE('',#14074,1.E-01);+#14074=AXIS2_PLACEMENT_3D('',#14053,#422,#13088);+#14075=ORIENTED_EDGE('',*,*,#14076,.T.);+#14076=EDGE_CURVE('',#14071,#14077,#14079,.T.);+#14077=VERTEX_POINT('',#14078);+#14078=CARTESIAN_POINT('',(7.396961550602,5.09,0.684729635533));+#14079=LINE('',#14072,#13094);+#14080=ORIENTED_EDGE('',*,*,#14081,.T.);+#14081=EDGE_CURVE('',#14077,#7437,#14082,.T.);+#14082=CIRCLE('',#14083,0.2);+#14083=AXIS2_PLACEMENT_3D('',#14041,#1569,#13100);+#14084=ORIENTED_EDGE('',*,*,#7436,.T.);+#14085=PLANE('',#14086);+#14086=AXIS2_PLACEMENT_3D('',#14087,#1569,#13);+#14087=CARTESIAN_POINT('',(7.414276639233,5.09,0.410238158856));+#14088=ADVANCED_FACE('',(#14089),#14150,.T.);+#14089=FACE_BOUND('',#14090,.T.);+#14090=EDGE_LOOP('',(#14091,#14095,#14101,#14108,#14113,#14120,#14125,#14130,#14135,#14141,#14146,#7443));+#14091=ORIENTED_EDGE('',*,*,#14092,.F.);+#14092=EDGE_CURVE('',#13423,#7445,#14093,.T.);+#14093=LINE('',#14094,#2043);+#14094=CARTESIAN_POINT('',(7.,4.91,0.630119079428));+#14095=ORIENTED_EDGE('',*,*,#14096,.T.);+#14096=EDGE_CURVE('',#13423,#14097,#14099,.T.);+#14097=VERTEX_POINT('',#14098);+#14098=CARTESIAN_POINT('',(7.2,4.91,0.75));+#14099=LINE('',#14100,#49);+#14100=CARTESIAN_POINT('',(6.85,4.91,0.75));+#14101=ORIENTED_EDGE('',*,*,#14102,.T.);+#14102=EDGE_CURVE('',#14097,#14103,#14105,.T.);+#14103=VERTEX_POINT('',#14104);+#14104=CARTESIAN_POINT('',(7.298480775301,4.91,0.667364817767));+#14105=CIRCLE('',#14106,0.1);+#14106=AXIS2_PLACEMENT_3D('',#14107,#422,#13051);+#14107=CARTESIAN_POINT('',(7.2,4.91,0.65));+#14108=ORIENTED_EDGE('',*,*,#14109,.T.);+#14109=EDGE_CURVE('',#14103,#14110,#14112,.T.);+#14110=VERTEX_POINT('',#14111);+#14111=CARTESIAN_POINT('',(7.382385590716,4.91,0.165270364467));+#14112=LINE('',#14104,#13057);+#14113=ORIENTED_EDGE('',*,*,#14114,.T.);+#14114=EDGE_CURVE('',#14110,#14115,#14117,.T.);+#14115=VERTEX_POINT('',#14116);+#14116=CARTESIAN_POINT('',(7.579347141319,4.91,1.387778780781E-16));+#14117=CIRCLE('',#14118,0.2);+#14118=AXIS2_PLACEMENT_3D('',#14119,#1569,#13066);+#14119=CARTESIAN_POINT('',(7.579347141319,4.91,0.2));+#14120=ORIENTED_EDGE('',*,*,#14121,.T.);+#14121=EDGE_CURVE('',#14115,#14122,#14124,.T.);+#14122=VERTEX_POINT('',#14123);+#14123=CARTESIAN_POINT('',(8.,4.91,1.387778780781E-16));+#14124=LINE('',#14116,#49);+#14125=ORIENTED_EDGE('',*,*,#14126,.T.);+#14126=EDGE_CURVE('',#14122,#14127,#14129,.T.);+#14127=VERTEX_POINT('',#14128);+#14128=CARTESIAN_POINT('',(8.,4.91,0.1));+#14129=LINE('',#14123,#2043);+#14130=ORIENTED_EDGE('',*,*,#14131,.T.);+#14131=EDGE_CURVE('',#14127,#14132,#14134,.T.);+#14132=VERTEX_POINT('',#14133);+#14133=CARTESIAN_POINT('',(7.579347141319,4.91,0.1));+#14134=LINE('',#14128,#1576);+#14135=ORIENTED_EDGE('',*,*,#14136,.T.);+#14136=EDGE_CURVE('',#14132,#14137,#14139,.T.);+#14137=VERTEX_POINT('',#14138);+#14138=CARTESIAN_POINT('',(7.480866366018,4.91,0.182635182233));+#14139=CIRCLE('',#14140,1.E-01);+#14140=AXIS2_PLACEMENT_3D('',#14119,#422,#13088);+#14141=ORIENTED_EDGE('',*,*,#14142,.T.);+#14142=EDGE_CURVE('',#14137,#14143,#14145,.T.);+#14143=VERTEX_POINT('',#14144);+#14144=CARTESIAN_POINT('',(7.396961550602,4.91,0.684729635533));+#14145=LINE('',#14138,#13094);+#14146=ORIENTED_EDGE('',*,*,#14147,.T.);+#14147=EDGE_CURVE('',#14143,#7440,#14148,.T.);+#14148=CIRCLE('',#14149,0.2);+#14149=AXIS2_PLACEMENT_3D('',#14107,#1569,#13100);+#14150=PLANE('',#14151);+#14151=AXIS2_PLACEMENT_3D('',#14152,#1569,#13);+#14152=CARTESIAN_POINT('',(7.414276639233,4.91,0.410238158856));+#14153=ADVANCED_FACE('',(#14154),#14161,.T.);+#14154=FACE_BOUND('',#14155,.F.);+#14155=EDGE_LOOP('',(#14156,#14146,#14159,#14160));+#14156=ORIENTED_EDGE('',*,*,#14157,.T.);+#14157=EDGE_CURVE('',#14077,#14143,#14158,.T.);+#14158=LINE('',#14078,#1568);+#14159=ORIENTED_EDGE('',*,*,#7439,.F.);+#14160=ORIENTED_EDGE('',*,*,#14081,.F.);+#14161=CYLINDRICAL_SURFACE('',#14162,0.2);+#14162=AXIS2_PLACEMENT_3D('',#14041,#422,#13100);+#14163=ADVANCED_FACE('',(#14164),#7271,.F.);+#14164=FACE_BOUND('',#14165,.F.);+#14165=EDGE_LOOP('',(#14091,#14166,#14167,#14171));+#14166=ORIENTED_EDGE('',*,*,#13422,.T.);+#14167=ORIENTED_EDGE('',*,*,#14168,.T.);+#14168=EDGE_CURVE('',#13419,#7460,#14169,.T.);+#14169=LINE('',#14170,#2043);+#14170=CARTESIAN_POINT('',(7.,4.69,0.630119079428));+#14171=ORIENTED_EDGE('',*,*,#7459,.F.);+#14172=ADVANCED_FACE('',(#14173),#14232,.F.);+#14173=FACE_BOUND('',#14174,.F.);+#14174=EDGE_LOOP('',(#14175,#14176,#14182,#14189,#14194,#14201,#14206,#14211,#14216,#14222,#14227,#14231));+#14175=ORIENTED_EDGE('',*,*,#14168,.F.);+#14176=ORIENTED_EDGE('',*,*,#14177,.T.);+#14177=EDGE_CURVE('',#13419,#14178,#14180,.T.);+#14178=VERTEX_POINT('',#14179);+#14179=CARTESIAN_POINT('',(7.2,4.69,0.75));+#14180=LINE('',#14181,#49);+#14181=CARTESIAN_POINT('',(6.85,4.69,0.75));+#14182=ORIENTED_EDGE('',*,*,#14183,.T.);+#14183=EDGE_CURVE('',#14178,#14184,#14186,.T.);+#14184=VERTEX_POINT('',#14185);+#14185=CARTESIAN_POINT('',(7.298480775301,4.69,0.667364817767));+#14186=CIRCLE('',#14187,0.1);+#14187=AXIS2_PLACEMENT_3D('',#14188,#422,#13051);+#14188=CARTESIAN_POINT('',(7.2,4.69,0.65));+#14189=ORIENTED_EDGE('',*,*,#14190,.T.);+#14190=EDGE_CURVE('',#14184,#14191,#14193,.T.);+#14191=VERTEX_POINT('',#14192);+#14192=CARTESIAN_POINT('',(7.382385590716,4.69,0.165270364467));+#14193=LINE('',#14185,#13057);+#14194=ORIENTED_EDGE('',*,*,#14195,.T.);+#14195=EDGE_CURVE('',#14191,#14196,#14198,.T.);+#14196=VERTEX_POINT('',#14197);+#14197=CARTESIAN_POINT('',(7.579347141319,4.69,1.387778780781E-16));+#14198=CIRCLE('',#14199,0.2);+#14199=AXIS2_PLACEMENT_3D('',#14200,#1569,#13066);+#14200=CARTESIAN_POINT('',(7.579347141319,4.69,0.2));+#14201=ORIENTED_EDGE('',*,*,#14202,.T.);+#14202=EDGE_CURVE('',#14196,#14203,#14205,.T.);+#14203=VERTEX_POINT('',#14204);+#14204=CARTESIAN_POINT('',(8.,4.69,1.387778780781E-16));+#14205=LINE('',#14197,#49);+#14206=ORIENTED_EDGE('',*,*,#14207,.T.);+#14207=EDGE_CURVE('',#14203,#14208,#14210,.T.);+#14208=VERTEX_POINT('',#14209);+#14209=CARTESIAN_POINT('',(8.,4.69,0.1));+#14210=LINE('',#14204,#2043);+#14211=ORIENTED_EDGE('',*,*,#14212,.T.);+#14212=EDGE_CURVE('',#14208,#14213,#14215,.T.);+#14213=VERTEX_POINT('',#14214);+#14214=CARTESIAN_POINT('',(7.579347141319,4.69,0.1));+#14215=LINE('',#14209,#1576);+#14216=ORIENTED_EDGE('',*,*,#14217,.T.);+#14217=EDGE_CURVE('',#14213,#14218,#14220,.T.);+#14218=VERTEX_POINT('',#14219);+#14219=CARTESIAN_POINT('',(7.480866366018,4.69,0.182635182233));+#14220=CIRCLE('',#14221,1.E-01);+#14221=AXIS2_PLACEMENT_3D('',#14200,#422,#13088);+#14222=ORIENTED_EDGE('',*,*,#14223,.T.);+#14223=EDGE_CURVE('',#14218,#14224,#14226,.T.);+#14224=VERTEX_POINT('',#14225);+#14225=CARTESIAN_POINT('',(7.396961550602,4.69,0.684729635533));+#14226=LINE('',#14219,#13094);+#14227=ORIENTED_EDGE('',*,*,#14228,.T.);+#14228=EDGE_CURVE('',#14224,#7472,#14229,.T.);+#14229=CIRCLE('',#14230,0.2);+#14230=AXIS2_PLACEMENT_3D('',#14188,#1569,#13100);+#14231=ORIENTED_EDGE('',*,*,#7471,.T.);+#14232=PLANE('',#14233);+#14233=AXIS2_PLACEMENT_3D('',#14234,#1569,#13);+#14234=CARTESIAN_POINT('',(7.414276639233,4.69,0.410238158856));+#14235=ADVANCED_FACE('',(#14236),#14297,.T.);+#14236=FACE_BOUND('',#14237,.T.);+#14237=EDGE_LOOP('',(#14238,#14242,#14248,#14255,#14260,#14267,#14272,#14277,#14282,#14288,#14293,#7478));+#14238=ORIENTED_EDGE('',*,*,#14239,.F.);+#14239=EDGE_CURVE('',#13415,#7480,#14240,.T.);+#14240=LINE('',#14241,#2043);+#14241=CARTESIAN_POINT('',(7.,4.51,0.630119079428));+#14242=ORIENTED_EDGE('',*,*,#14243,.T.);+#14243=EDGE_CURVE('',#13415,#14244,#14246,.T.);+#14244=VERTEX_POINT('',#14245);+#14245=CARTESIAN_POINT('',(7.2,4.51,0.75));+#14246=LINE('',#14247,#49);+#14247=CARTESIAN_POINT('',(6.85,4.51,0.75));+#14248=ORIENTED_EDGE('',*,*,#14249,.T.);+#14249=EDGE_CURVE('',#14244,#14250,#14252,.T.);+#14250=VERTEX_POINT('',#14251);+#14251=CARTESIAN_POINT('',(7.298480775301,4.51,0.667364817767));+#14252=CIRCLE('',#14253,0.1);+#14253=AXIS2_PLACEMENT_3D('',#14254,#422,#13051);+#14254=CARTESIAN_POINT('',(7.2,4.51,0.65));+#14255=ORIENTED_EDGE('',*,*,#14256,.T.);+#14256=EDGE_CURVE('',#14250,#14257,#14259,.T.);+#14257=VERTEX_POINT('',#14258);+#14258=CARTESIAN_POINT('',(7.382385590716,4.51,0.165270364467));+#14259=LINE('',#14251,#13057);+#14260=ORIENTED_EDGE('',*,*,#14261,.T.);+#14261=EDGE_CURVE('',#14257,#14262,#14264,.T.);+#14262=VERTEX_POINT('',#14263);+#14263=CARTESIAN_POINT('',(7.579347141319,4.51,1.387778780781E-16));+#14264=CIRCLE('',#14265,0.2);+#14265=AXIS2_PLACEMENT_3D('',#14266,#1569,#13066);+#14266=CARTESIAN_POINT('',(7.579347141319,4.51,0.2));+#14267=ORIENTED_EDGE('',*,*,#14268,.T.);+#14268=EDGE_CURVE('',#14262,#14269,#14271,.T.);+#14269=VERTEX_POINT('',#14270);+#14270=CARTESIAN_POINT('',(8.,4.51,1.387778780781E-16));+#14271=LINE('',#14263,#49);+#14272=ORIENTED_EDGE('',*,*,#14273,.T.);+#14273=EDGE_CURVE('',#14269,#14274,#14276,.T.);+#14274=VERTEX_POINT('',#14275);+#14275=CARTESIAN_POINT('',(8.,4.51,0.1));+#14276=LINE('',#14270,#2043);+#14277=ORIENTED_EDGE('',*,*,#14278,.T.);+#14278=EDGE_CURVE('',#14274,#14279,#14281,.T.);+#14279=VERTEX_POINT('',#14280);+#14280=CARTESIAN_POINT('',(7.579347141319,4.51,0.1));+#14281=LINE('',#14275,#1576);+#14282=ORIENTED_EDGE('',*,*,#14283,.T.);+#14283=EDGE_CURVE('',#14279,#14284,#14286,.T.);+#14284=VERTEX_POINT('',#14285);+#14285=CARTESIAN_POINT('',(7.480866366018,4.51,0.182635182233));+#14286=CIRCLE('',#14287,1.E-01);+#14287=AXIS2_PLACEMENT_3D('',#14266,#422,#13088);+#14288=ORIENTED_EDGE('',*,*,#14289,.T.);+#14289=EDGE_CURVE('',#14284,#14290,#14292,.T.);+#14290=VERTEX_POINT('',#14291);+#14291=CARTESIAN_POINT('',(7.396961550602,4.51,0.684729635533));+#14292=LINE('',#14285,#13094);+#14293=ORIENTED_EDGE('',*,*,#14294,.T.);+#14294=EDGE_CURVE('',#14290,#7475,#14295,.T.);+#14295=CIRCLE('',#14296,0.2);+#14296=AXIS2_PLACEMENT_3D('',#14254,#1569,#13100);+#14297=PLANE('',#14298);+#14298=AXIS2_PLACEMENT_3D('',#14299,#1569,#13);+#14299=CARTESIAN_POINT('',(7.414276639233,4.51,0.410238158856));+#14300=ADVANCED_FACE('',(#14301),#14308,.T.);+#14301=FACE_BOUND('',#14302,.F.);+#14302=EDGE_LOOP('',(#14303,#14293,#14306,#14307));+#14303=ORIENTED_EDGE('',*,*,#14304,.T.);+#14304=EDGE_CURVE('',#14224,#14290,#14305,.T.);+#14305=LINE('',#14225,#1568);+#14306=ORIENTED_EDGE('',*,*,#7474,.F.);+#14307=ORIENTED_EDGE('',*,*,#14228,.F.);+#14308=CYLINDRICAL_SURFACE('',#14309,0.2);+#14309=AXIS2_PLACEMENT_3D('',#14188,#422,#13100);+#14310=ADVANCED_FACE('',(#14311),#7271,.F.);+#14311=FACE_BOUND('',#14312,.F.);+#14312=EDGE_LOOP('',(#14238,#14313,#14314,#14318));+#14313=ORIENTED_EDGE('',*,*,#13414,.T.);+#14314=ORIENTED_EDGE('',*,*,#14315,.T.);+#14315=EDGE_CURVE('',#13411,#7495,#14316,.T.);+#14316=LINE('',#14317,#2043);+#14317=CARTESIAN_POINT('',(7.,4.29,0.630119079428));+#14318=ORIENTED_EDGE('',*,*,#7494,.F.);+#14319=ADVANCED_FACE('',(#14320),#14379,.F.);+#14320=FACE_BOUND('',#14321,.F.);+#14321=EDGE_LOOP('',(#14322,#14323,#14329,#14336,#14341,#14348,#14353,#14358,#14363,#14369,#14374,#14378));+#14322=ORIENTED_EDGE('',*,*,#14315,.F.);+#14323=ORIENTED_EDGE('',*,*,#14324,.T.);+#14324=EDGE_CURVE('',#13411,#14325,#14327,.T.);+#14325=VERTEX_POINT('',#14326);+#14326=CARTESIAN_POINT('',(7.2,4.29,0.75));+#14327=LINE('',#14328,#49);+#14328=CARTESIAN_POINT('',(6.85,4.29,0.75));+#14329=ORIENTED_EDGE('',*,*,#14330,.T.);+#14330=EDGE_CURVE('',#14325,#14331,#14333,.T.);+#14331=VERTEX_POINT('',#14332);+#14332=CARTESIAN_POINT('',(7.298480775301,4.29,0.667364817767));+#14333=CIRCLE('',#14334,0.1);+#14334=AXIS2_PLACEMENT_3D('',#14335,#422,#13051);+#14335=CARTESIAN_POINT('',(7.2,4.29,0.65));+#14336=ORIENTED_EDGE('',*,*,#14337,.T.);+#14337=EDGE_CURVE('',#14331,#14338,#14340,.T.);+#14338=VERTEX_POINT('',#14339);+#14339=CARTESIAN_POINT('',(7.382385590716,4.29,0.165270364467));+#14340=LINE('',#14332,#13057);+#14341=ORIENTED_EDGE('',*,*,#14342,.T.);+#14342=EDGE_CURVE('',#14338,#14343,#14345,.T.);+#14343=VERTEX_POINT('',#14344);+#14344=CARTESIAN_POINT('',(7.579347141319,4.29,1.387778780781E-16));+#14345=CIRCLE('',#14346,0.2);+#14346=AXIS2_PLACEMENT_3D('',#14347,#1569,#13066);+#14347=CARTESIAN_POINT('',(7.579347141319,4.29,0.2));+#14348=ORIENTED_EDGE('',*,*,#14349,.T.);+#14349=EDGE_CURVE('',#14343,#14350,#14352,.T.);+#14350=VERTEX_POINT('',#14351);+#14351=CARTESIAN_POINT('',(8.,4.29,1.387778780781E-16));+#14352=LINE('',#14344,#49);+#14353=ORIENTED_EDGE('',*,*,#14354,.T.);+#14354=EDGE_CURVE('',#14350,#14355,#14357,.T.);+#14355=VERTEX_POINT('',#14356);+#14356=CARTESIAN_POINT('',(8.,4.29,0.1));+#14357=LINE('',#14351,#2043);+#14358=ORIENTED_EDGE('',*,*,#14359,.T.);+#14359=EDGE_CURVE('',#14355,#14360,#14362,.T.);+#14360=VERTEX_POINT('',#14361);+#14361=CARTESIAN_POINT('',(7.579347141319,4.29,0.1));+#14362=LINE('',#14356,#1576);+#14363=ORIENTED_EDGE('',*,*,#14364,.T.);+#14364=EDGE_CURVE('',#14360,#14365,#14367,.T.);+#14365=VERTEX_POINT('',#14366);+#14366=CARTESIAN_POINT('',(7.480866366018,4.29,0.182635182233));+#14367=CIRCLE('',#14368,1.E-01);+#14368=AXIS2_PLACEMENT_3D('',#14347,#422,#13088);+#14369=ORIENTED_EDGE('',*,*,#14370,.T.);+#14370=EDGE_CURVE('',#14365,#14371,#14373,.T.);+#14371=VERTEX_POINT('',#14372);+#14372=CARTESIAN_POINT('',(7.396961550602,4.29,0.684729635533));+#14373=LINE('',#14366,#13094);+#14374=ORIENTED_EDGE('',*,*,#14375,.T.);+#14375=EDGE_CURVE('',#14371,#7507,#14376,.T.);+#14376=CIRCLE('',#14377,0.2);+#14377=AXIS2_PLACEMENT_3D('',#14335,#1569,#13100);+#14378=ORIENTED_EDGE('',*,*,#7506,.T.);+#14379=PLANE('',#14380);+#14380=AXIS2_PLACEMENT_3D('',#14381,#1569,#13);+#14381=CARTESIAN_POINT('',(7.414276639233,4.29,0.410238158856));+#14382=ADVANCED_FACE('',(#14383),#14444,.T.);+#14383=FACE_BOUND('',#14384,.T.);+#14384=EDGE_LOOP('',(#14385,#14389,#14395,#14402,#14407,#14414,#14419,#14424,#14429,#14435,#14440,#7513));+#14385=ORIENTED_EDGE('',*,*,#14386,.F.);+#14386=EDGE_CURVE('',#13407,#7515,#14387,.T.);+#14387=LINE('',#14388,#2043);+#14388=CARTESIAN_POINT('',(7.,4.11,0.630119079428));+#14389=ORIENTED_EDGE('',*,*,#14390,.T.);+#14390=EDGE_CURVE('',#13407,#14391,#14393,.T.);+#14391=VERTEX_POINT('',#14392);+#14392=CARTESIAN_POINT('',(7.2,4.11,0.75));+#14393=LINE('',#14394,#49);+#14394=CARTESIAN_POINT('',(6.85,4.11,0.75));+#14395=ORIENTED_EDGE('',*,*,#14396,.T.);+#14396=EDGE_CURVE('',#14391,#14397,#14399,.T.);+#14397=VERTEX_POINT('',#14398);+#14398=CARTESIAN_POINT('',(7.298480775301,4.11,0.667364817767));+#14399=CIRCLE('',#14400,0.1);+#14400=AXIS2_PLACEMENT_3D('',#14401,#422,#13051);+#14401=CARTESIAN_POINT('',(7.2,4.11,0.65));+#14402=ORIENTED_EDGE('',*,*,#14403,.T.);+#14403=EDGE_CURVE('',#14397,#14404,#14406,.T.);+#14404=VERTEX_POINT('',#14405);+#14405=CARTESIAN_POINT('',(7.382385590716,4.11,0.165270364467));+#14406=LINE('',#14398,#13057);+#14407=ORIENTED_EDGE('',*,*,#14408,.T.);+#14408=EDGE_CURVE('',#14404,#14409,#14411,.T.);+#14409=VERTEX_POINT('',#14410);+#14410=CARTESIAN_POINT('',(7.579347141319,4.11,1.387778780781E-16));+#14411=CIRCLE('',#14412,0.2);+#14412=AXIS2_PLACEMENT_3D('',#14413,#1569,#13066);+#14413=CARTESIAN_POINT('',(7.579347141319,4.11,0.2));+#14414=ORIENTED_EDGE('',*,*,#14415,.T.);+#14415=EDGE_CURVE('',#14409,#14416,#14418,.T.);+#14416=VERTEX_POINT('',#14417);+#14417=CARTESIAN_POINT('',(8.,4.11,1.387778780781E-16));+#14418=LINE('',#14410,#49);+#14419=ORIENTED_EDGE('',*,*,#14420,.T.);+#14420=EDGE_CURVE('',#14416,#14421,#14423,.T.);+#14421=VERTEX_POINT('',#14422);+#14422=CARTESIAN_POINT('',(8.,4.11,0.1));+#14423=LINE('',#14417,#2043);+#14424=ORIENTED_EDGE('',*,*,#14425,.T.);+#14425=EDGE_CURVE('',#14421,#14426,#14428,.T.);+#14426=VERTEX_POINT('',#14427);+#14427=CARTESIAN_POINT('',(7.579347141319,4.11,0.1));+#14428=LINE('',#14422,#1576);+#14429=ORIENTED_EDGE('',*,*,#14430,.T.);+#14430=EDGE_CURVE('',#14426,#14431,#14433,.T.);+#14431=VERTEX_POINT('',#14432);+#14432=CARTESIAN_POINT('',(7.480866366018,4.11,0.182635182233));+#14433=CIRCLE('',#14434,1.E-01);+#14434=AXIS2_PLACEMENT_3D('',#14413,#422,#13088);+#14435=ORIENTED_EDGE('',*,*,#14436,.T.);+#14436=EDGE_CURVE('',#14431,#14437,#14439,.T.);+#14437=VERTEX_POINT('',#14438);+#14438=CARTESIAN_POINT('',(7.396961550602,4.11,0.684729635533));+#14439=LINE('',#14432,#13094);+#14440=ORIENTED_EDGE('',*,*,#14441,.T.);+#14441=EDGE_CURVE('',#14437,#7510,#14442,.T.);+#14442=CIRCLE('',#14443,0.2);+#14443=AXIS2_PLACEMENT_3D('',#14401,#1569,#13100);+#14444=PLANE('',#14445);+#14445=AXIS2_PLACEMENT_3D('',#14446,#1569,#13);+#14446=CARTESIAN_POINT('',(7.414276639233,4.11,0.410238158856));+#14447=ADVANCED_FACE('',(#14448),#14455,.T.);+#14448=FACE_BOUND('',#14449,.F.);+#14449=EDGE_LOOP('',(#14450,#14440,#14453,#14454));+#14450=ORIENTED_EDGE('',*,*,#14451,.T.);+#14451=EDGE_CURVE('',#14371,#14437,#14452,.T.);+#14452=LINE('',#14372,#1568);+#14453=ORIENTED_EDGE('',*,*,#7509,.F.);+#14454=ORIENTED_EDGE('',*,*,#14375,.F.);+#14455=CYLINDRICAL_SURFACE('',#14456,0.2);+#14456=AXIS2_PLACEMENT_3D('',#14335,#422,#13100);+#14457=ADVANCED_FACE('',(#14458),#7271,.F.);+#14458=FACE_BOUND('',#14459,.F.);+#14459=EDGE_LOOP('',(#14385,#14460,#14461,#14465));+#14460=ORIENTED_EDGE('',*,*,#13406,.T.);+#14461=ORIENTED_EDGE('',*,*,#14462,.T.);+#14462=EDGE_CURVE('',#13403,#7530,#14463,.T.);+#14463=LINE('',#14464,#2043);+#14464=CARTESIAN_POINT('',(7.,3.89,0.630119079428));+#14465=ORIENTED_EDGE('',*,*,#7529,.F.);+#14466=ADVANCED_FACE('',(#14467),#14526,.F.);+#14467=FACE_BOUND('',#14468,.F.);+#14468=EDGE_LOOP('',(#14469,#14470,#14476,#14483,#14488,#14495,#14500,#14505,#14510,#14516,#14521,#14525));+#14469=ORIENTED_EDGE('',*,*,#14462,.F.);+#14470=ORIENTED_EDGE('',*,*,#14471,.T.);+#14471=EDGE_CURVE('',#13403,#14472,#14474,.T.);+#14472=VERTEX_POINT('',#14473);+#14473=CARTESIAN_POINT('',(7.2,3.89,0.75));+#14474=LINE('',#14475,#49);+#14475=CARTESIAN_POINT('',(6.85,3.89,0.75));+#14476=ORIENTED_EDGE('',*,*,#14477,.T.);+#14477=EDGE_CURVE('',#14472,#14478,#14480,.T.);+#14478=VERTEX_POINT('',#14479);+#14479=CARTESIAN_POINT('',(7.298480775301,3.89,0.667364817767));+#14480=CIRCLE('',#14481,0.1);+#14481=AXIS2_PLACEMENT_3D('',#14482,#422,#13051);+#14482=CARTESIAN_POINT('',(7.2,3.89,0.65));+#14483=ORIENTED_EDGE('',*,*,#14484,.T.);+#14484=EDGE_CURVE('',#14478,#14485,#14487,.T.);+#14485=VERTEX_POINT('',#14486);+#14486=CARTESIAN_POINT('',(7.382385590716,3.89,0.165270364467));+#14487=LINE('',#14479,#13057);+#14488=ORIENTED_EDGE('',*,*,#14489,.T.);+#14489=EDGE_CURVE('',#14485,#14490,#14492,.T.);+#14490=VERTEX_POINT('',#14491);+#14491=CARTESIAN_POINT('',(7.579347141319,3.89,1.387778780781E-16));+#14492=CIRCLE('',#14493,0.2);+#14493=AXIS2_PLACEMENT_3D('',#14494,#1569,#13066);+#14494=CARTESIAN_POINT('',(7.579347141319,3.89,0.2));+#14495=ORIENTED_EDGE('',*,*,#14496,.T.);+#14496=EDGE_CURVE('',#14490,#14497,#14499,.T.);+#14497=VERTEX_POINT('',#14498);+#14498=CARTESIAN_POINT('',(8.,3.89,1.387778780781E-16));+#14499=LINE('',#14491,#49);+#14500=ORIENTED_EDGE('',*,*,#14501,.T.);+#14501=EDGE_CURVE('',#14497,#14502,#14504,.T.);+#14502=VERTEX_POINT('',#14503);+#14503=CARTESIAN_POINT('',(8.,3.89,0.1));+#14504=LINE('',#14498,#2043);+#14505=ORIENTED_EDGE('',*,*,#14506,.T.);+#14506=EDGE_CURVE('',#14502,#14507,#14509,.T.);+#14507=VERTEX_POINT('',#14508);+#14508=CARTESIAN_POINT('',(7.579347141319,3.89,0.1));+#14509=LINE('',#14503,#1576);+#14510=ORIENTED_EDGE('',*,*,#14511,.T.);+#14511=EDGE_CURVE('',#14507,#14512,#14514,.T.);+#14512=VERTEX_POINT('',#14513);+#14513=CARTESIAN_POINT('',(7.480866366018,3.89,0.182635182233));+#14514=CIRCLE('',#14515,1.E-01);+#14515=AXIS2_PLACEMENT_3D('',#14494,#422,#13088);+#14516=ORIENTED_EDGE('',*,*,#14517,.T.);+#14517=EDGE_CURVE('',#14512,#14518,#14520,.T.);+#14518=VERTEX_POINT('',#14519);+#14519=CARTESIAN_POINT('',(7.396961550602,3.89,0.684729635533));+#14520=LINE('',#14513,#13094);+#14521=ORIENTED_EDGE('',*,*,#14522,.T.);+#14522=EDGE_CURVE('',#14518,#7542,#14523,.T.);+#14523=CIRCLE('',#14524,0.2);+#14524=AXIS2_PLACEMENT_3D('',#14482,#1569,#13100);+#14525=ORIENTED_EDGE('',*,*,#7541,.T.);+#14526=PLANE('',#14527);+#14527=AXIS2_PLACEMENT_3D('',#14528,#1569,#13);+#14528=CARTESIAN_POINT('',(7.414276639233,3.89,0.410238158856));+#14529=ADVANCED_FACE('',(#14530),#14591,.T.);+#14530=FACE_BOUND('',#14531,.T.);+#14531=EDGE_LOOP('',(#14532,#14536,#14542,#14549,#14554,#14561,#14566,#14571,#14576,#14582,#14587,#7548));+#14532=ORIENTED_EDGE('',*,*,#14533,.F.);+#14533=EDGE_CURVE('',#13399,#7550,#14534,.T.);+#14534=LINE('',#14535,#2043);+#14535=CARTESIAN_POINT('',(7.,3.71,0.630119079428));+#14536=ORIENTED_EDGE('',*,*,#14537,.T.);+#14537=EDGE_CURVE('',#13399,#14538,#14540,.T.);+#14538=VERTEX_POINT('',#14539);+#14539=CARTESIAN_POINT('',(7.2,3.71,0.75));+#14540=LINE('',#14541,#49);+#14541=CARTESIAN_POINT('',(6.85,3.71,0.75));+#14542=ORIENTED_EDGE('',*,*,#14543,.T.);+#14543=EDGE_CURVE('',#14538,#14544,#14546,.T.);+#14544=VERTEX_POINT('',#14545);+#14545=CARTESIAN_POINT('',(7.298480775301,3.71,0.667364817767));+#14546=CIRCLE('',#14547,0.1);+#14547=AXIS2_PLACEMENT_3D('',#14548,#422,#13051);+#14548=CARTESIAN_POINT('',(7.2,3.71,0.65));+#14549=ORIENTED_EDGE('',*,*,#14550,.T.);+#14550=EDGE_CURVE('',#14544,#14551,#14553,.T.);+#14551=VERTEX_POINT('',#14552);+#14552=CARTESIAN_POINT('',(7.382385590716,3.71,0.165270364467));+#14553=LINE('',#14545,#13057);+#14554=ORIENTED_EDGE('',*,*,#14555,.T.);+#14555=EDGE_CURVE('',#14551,#14556,#14558,.T.);+#14556=VERTEX_POINT('',#14557);+#14557=CARTESIAN_POINT('',(7.579347141319,3.71,1.387778780781E-16));+#14558=CIRCLE('',#14559,0.2);+#14559=AXIS2_PLACEMENT_3D('',#14560,#1569,#13066);+#14560=CARTESIAN_POINT('',(7.579347141319,3.71,0.2));+#14561=ORIENTED_EDGE('',*,*,#14562,.T.);+#14562=EDGE_CURVE('',#14556,#14563,#14565,.T.);+#14563=VERTEX_POINT('',#14564);+#14564=CARTESIAN_POINT('',(8.,3.71,1.387778780781E-16));+#14565=LINE('',#14557,#49);+#14566=ORIENTED_EDGE('',*,*,#14567,.T.);+#14567=EDGE_CURVE('',#14563,#14568,#14570,.T.);+#14568=VERTEX_POINT('',#14569);+#14569=CARTESIAN_POINT('',(8.,3.71,0.1));+#14570=LINE('',#14564,#2043);+#14571=ORIENTED_EDGE('',*,*,#14572,.T.);+#14572=EDGE_CURVE('',#14568,#14573,#14575,.T.);+#14573=VERTEX_POINT('',#14574);+#14574=CARTESIAN_POINT('',(7.579347141319,3.71,0.1));+#14575=LINE('',#14569,#1576);+#14576=ORIENTED_EDGE('',*,*,#14577,.T.);+#14577=EDGE_CURVE('',#14573,#14578,#14580,.T.);+#14578=VERTEX_POINT('',#14579);+#14579=CARTESIAN_POINT('',(7.480866366018,3.71,0.182635182233));+#14580=CIRCLE('',#14581,1.E-01);+#14581=AXIS2_PLACEMENT_3D('',#14560,#422,#13088);+#14582=ORIENTED_EDGE('',*,*,#14583,.T.);+#14583=EDGE_CURVE('',#14578,#14584,#14586,.T.);+#14584=VERTEX_POINT('',#14585);+#14585=CARTESIAN_POINT('',(7.396961550602,3.71,0.684729635533));+#14586=LINE('',#14579,#13094);+#14587=ORIENTED_EDGE('',*,*,#14588,.T.);+#14588=EDGE_CURVE('',#14584,#7545,#14589,.T.);+#14589=CIRCLE('',#14590,0.2);+#14590=AXIS2_PLACEMENT_3D('',#14548,#1569,#13100);+#14591=PLANE('',#14592);+#14592=AXIS2_PLACEMENT_3D('',#14593,#1569,#13);+#14593=CARTESIAN_POINT('',(7.414276639233,3.71,0.410238158856));+#14594=ADVANCED_FACE('',(#14595),#14602,.T.);+#14595=FACE_BOUND('',#14596,.F.);+#14596=EDGE_LOOP('',(#14597,#14587,#14600,#14601));+#14597=ORIENTED_EDGE('',*,*,#14598,.T.);+#14598=EDGE_CURVE('',#14518,#14584,#14599,.T.);+#14599=LINE('',#14519,#1568);+#14600=ORIENTED_EDGE('',*,*,#7544,.F.);+#14601=ORIENTED_EDGE('',*,*,#14522,.F.);+#14602=CYLINDRICAL_SURFACE('',#14603,0.2);+#14603=AXIS2_PLACEMENT_3D('',#14482,#422,#13100);+#14604=ADVANCED_FACE('',(#14605),#7271,.F.);+#14605=FACE_BOUND('',#14606,.F.);+#14606=EDGE_LOOP('',(#14532,#14607,#14608,#14612));+#14607=ORIENTED_EDGE('',*,*,#13398,.T.);+#14608=ORIENTED_EDGE('',*,*,#14609,.T.);+#14609=EDGE_CURVE('',#13395,#7565,#14610,.T.);+#14610=LINE('',#14611,#2043);+#14611=CARTESIAN_POINT('',(7.,3.49,0.630119079428));+#14612=ORIENTED_EDGE('',*,*,#7564,.F.);+#14613=ADVANCED_FACE('',(#14614),#14673,.F.);+#14614=FACE_BOUND('',#14615,.F.);+#14615=EDGE_LOOP('',(#14616,#14617,#14623,#14630,#14635,#14642,#14647,#14652,#14657,#14663,#14668,#14672));+#14616=ORIENTED_EDGE('',*,*,#14609,.F.);+#14617=ORIENTED_EDGE('',*,*,#14618,.T.);+#14618=EDGE_CURVE('',#13395,#14619,#14621,.T.);+#14619=VERTEX_POINT('',#14620);+#14620=CARTESIAN_POINT('',(7.2,3.49,0.75));+#14621=LINE('',#14622,#49);+#14622=CARTESIAN_POINT('',(6.85,3.49,0.75));+#14623=ORIENTED_EDGE('',*,*,#14624,.T.);+#14624=EDGE_CURVE('',#14619,#14625,#14627,.T.);+#14625=VERTEX_POINT('',#14626);+#14626=CARTESIAN_POINT('',(7.298480775301,3.49,0.667364817767));+#14627=CIRCLE('',#14628,0.1);+#14628=AXIS2_PLACEMENT_3D('',#14629,#422,#13051);+#14629=CARTESIAN_POINT('',(7.2,3.49,0.65));+#14630=ORIENTED_EDGE('',*,*,#14631,.T.);+#14631=EDGE_CURVE('',#14625,#14632,#14634,.T.);+#14632=VERTEX_POINT('',#14633);+#14633=CARTESIAN_POINT('',(7.382385590716,3.49,0.165270364467));+#14634=LINE('',#14626,#13057);+#14635=ORIENTED_EDGE('',*,*,#14636,.T.);+#14636=EDGE_CURVE('',#14632,#14637,#14639,.T.);+#14637=VERTEX_POINT('',#14638);+#14638=CARTESIAN_POINT('',(7.579347141319,3.49,1.387778780781E-16));+#14639=CIRCLE('',#14640,0.2);+#14640=AXIS2_PLACEMENT_3D('',#14641,#1569,#13066);+#14641=CARTESIAN_POINT('',(7.579347141319,3.49,0.2));+#14642=ORIENTED_EDGE('',*,*,#14643,.T.);+#14643=EDGE_CURVE('',#14637,#14644,#14646,.T.);+#14644=VERTEX_POINT('',#14645);+#14645=CARTESIAN_POINT('',(8.,3.49,1.387778780781E-16));+#14646=LINE('',#14638,#49);+#14647=ORIENTED_EDGE('',*,*,#14648,.T.);+#14648=EDGE_CURVE('',#14644,#14649,#14651,.T.);+#14649=VERTEX_POINT('',#14650);+#14650=CARTESIAN_POINT('',(8.,3.49,0.1));+#14651=LINE('',#14645,#2043);+#14652=ORIENTED_EDGE('',*,*,#14653,.T.);+#14653=EDGE_CURVE('',#14649,#14654,#14656,.T.);+#14654=VERTEX_POINT('',#14655);+#14655=CARTESIAN_POINT('',(7.579347141319,3.49,0.1));+#14656=LINE('',#14650,#1576);+#14657=ORIENTED_EDGE('',*,*,#14658,.T.);+#14658=EDGE_CURVE('',#14654,#14659,#14661,.T.);+#14659=VERTEX_POINT('',#14660);+#14660=CARTESIAN_POINT('',(7.480866366018,3.49,0.182635182233));+#14661=CIRCLE('',#14662,1.E-01);+#14662=AXIS2_PLACEMENT_3D('',#14641,#422,#13088);+#14663=ORIENTED_EDGE('',*,*,#14664,.T.);+#14664=EDGE_CURVE('',#14659,#14665,#14667,.T.);+#14665=VERTEX_POINT('',#14666);+#14666=CARTESIAN_POINT('',(7.396961550602,3.49,0.684729635533));+#14667=LINE('',#14660,#13094);+#14668=ORIENTED_EDGE('',*,*,#14669,.T.);+#14669=EDGE_CURVE('',#14665,#7577,#14670,.T.);+#14670=CIRCLE('',#14671,0.2);+#14671=AXIS2_PLACEMENT_3D('',#14629,#1569,#13100);+#14672=ORIENTED_EDGE('',*,*,#7576,.T.);+#14673=PLANE('',#14674);+#14674=AXIS2_PLACEMENT_3D('',#14675,#1569,#13);+#14675=CARTESIAN_POINT('',(7.414276639233,3.49,0.410238158856));+#14676=ADVANCED_FACE('',(#14677),#14738,.T.);+#14677=FACE_BOUND('',#14678,.T.);+#14678=EDGE_LOOP('',(#14679,#14683,#14689,#14696,#14701,#14708,#14713,#14718,#14723,#14729,#14734,#7583));+#14679=ORIENTED_EDGE('',*,*,#14680,.F.);+#14680=EDGE_CURVE('',#13391,#7585,#14681,.T.);+#14681=LINE('',#14682,#2043);+#14682=CARTESIAN_POINT('',(7.,3.31,0.630119079428));+#14683=ORIENTED_EDGE('',*,*,#14684,.T.);+#14684=EDGE_CURVE('',#13391,#14685,#14687,.T.);+#14685=VERTEX_POINT('',#14686);+#14686=CARTESIAN_POINT('',(7.2,3.31,0.75));+#14687=LINE('',#14688,#49);+#14688=CARTESIAN_POINT('',(6.85,3.31,0.75));+#14689=ORIENTED_EDGE('',*,*,#14690,.T.);+#14690=EDGE_CURVE('',#14685,#14691,#14693,.T.);+#14691=VERTEX_POINT('',#14692);+#14692=CARTESIAN_POINT('',(7.298480775301,3.31,0.667364817767));+#14693=CIRCLE('',#14694,0.1);+#14694=AXIS2_PLACEMENT_3D('',#14695,#422,#13051);+#14695=CARTESIAN_POINT('',(7.2,3.31,0.65));+#14696=ORIENTED_EDGE('',*,*,#14697,.T.);+#14697=EDGE_CURVE('',#14691,#14698,#14700,.T.);+#14698=VERTEX_POINT('',#14699);+#14699=CARTESIAN_POINT('',(7.382385590716,3.31,0.165270364467));+#14700=LINE('',#14692,#13057);+#14701=ORIENTED_EDGE('',*,*,#14702,.T.);+#14702=EDGE_CURVE('',#14698,#14703,#14705,.T.);+#14703=VERTEX_POINT('',#14704);+#14704=CARTESIAN_POINT('',(7.579347141319,3.31,1.387778780781E-16));+#14705=CIRCLE('',#14706,0.2);+#14706=AXIS2_PLACEMENT_3D('',#14707,#1569,#13066);+#14707=CARTESIAN_POINT('',(7.579347141319,3.31,0.2));+#14708=ORIENTED_EDGE('',*,*,#14709,.T.);+#14709=EDGE_CURVE('',#14703,#14710,#14712,.T.);+#14710=VERTEX_POINT('',#14711);+#14711=CARTESIAN_POINT('',(8.,3.31,1.387778780781E-16));+#14712=LINE('',#14704,#49);+#14713=ORIENTED_EDGE('',*,*,#14714,.T.);+#14714=EDGE_CURVE('',#14710,#14715,#14717,.T.);+#14715=VERTEX_POINT('',#14716);+#14716=CARTESIAN_POINT('',(8.,3.31,0.1));+#14717=LINE('',#14711,#2043);+#14718=ORIENTED_EDGE('',*,*,#14719,.T.);+#14719=EDGE_CURVE('',#14715,#14720,#14722,.T.);+#14720=VERTEX_POINT('',#14721);+#14721=CARTESIAN_POINT('',(7.579347141319,3.31,0.1));+#14722=LINE('',#14716,#1576);+#14723=ORIENTED_EDGE('',*,*,#14724,.T.);+#14724=EDGE_CURVE('',#14720,#14725,#14727,.T.);+#14725=VERTEX_POINT('',#14726);+#14726=CARTESIAN_POINT('',(7.480866366018,3.31,0.182635182233));+#14727=CIRCLE('',#14728,1.E-01);+#14728=AXIS2_PLACEMENT_3D('',#14707,#422,#13088);+#14729=ORIENTED_EDGE('',*,*,#14730,.T.);+#14730=EDGE_CURVE('',#14725,#14731,#14733,.T.);+#14731=VERTEX_POINT('',#14732);+#14732=CARTESIAN_POINT('',(7.396961550602,3.31,0.684729635533));+#14733=LINE('',#14726,#13094);+#14734=ORIENTED_EDGE('',*,*,#14735,.T.);+#14735=EDGE_CURVE('',#14731,#7580,#14736,.T.);+#14736=CIRCLE('',#14737,0.2);+#14737=AXIS2_PLACEMENT_3D('',#14695,#1569,#13100);+#14738=PLANE('',#14739);+#14739=AXIS2_PLACEMENT_3D('',#14740,#1569,#13);+#14740=CARTESIAN_POINT('',(7.414276639233,3.31,0.410238158856));+#14741=ADVANCED_FACE('',(#14742),#14749,.T.);+#14742=FACE_BOUND('',#14743,.F.);+#14743=EDGE_LOOP('',(#14744,#14734,#14747,#14748));+#14744=ORIENTED_EDGE('',*,*,#14745,.T.);+#14745=EDGE_CURVE('',#14665,#14731,#14746,.T.);+#14746=LINE('',#14666,#1568);+#14747=ORIENTED_EDGE('',*,*,#7579,.F.);+#14748=ORIENTED_EDGE('',*,*,#14669,.F.);+#14749=CYLINDRICAL_SURFACE('',#14750,0.2);+#14750=AXIS2_PLACEMENT_3D('',#14629,#422,#13100);+#14751=ADVANCED_FACE('',(#14752),#7271,.F.);+#14752=FACE_BOUND('',#14753,.F.);+#14753=EDGE_LOOP('',(#14679,#14754,#14755,#14759));+#14754=ORIENTED_EDGE('',*,*,#13390,.T.);+#14755=ORIENTED_EDGE('',*,*,#14756,.T.);+#14756=EDGE_CURVE('',#13387,#7600,#14757,.T.);+#14757=LINE('',#14758,#2043);+#14758=CARTESIAN_POINT('',(7.,3.09,0.630119079428));+#14759=ORIENTED_EDGE('',*,*,#7599,.F.);+#14760=ADVANCED_FACE('',(#14761),#14820,.F.);+#14761=FACE_BOUND('',#14762,.F.);+#14762=EDGE_LOOP('',(#14763,#14764,#14770,#14777,#14782,#14789,#14794,#14799,#14804,#14810,#14815,#14819));+#14763=ORIENTED_EDGE('',*,*,#14756,.F.);+#14764=ORIENTED_EDGE('',*,*,#14765,.T.);+#14765=EDGE_CURVE('',#13387,#14766,#14768,.T.);+#14766=VERTEX_POINT('',#14767);+#14767=CARTESIAN_POINT('',(7.2,3.09,0.75));+#14768=LINE('',#14769,#49);+#14769=CARTESIAN_POINT('',(6.85,3.09,0.75));+#14770=ORIENTED_EDGE('',*,*,#14771,.T.);+#14771=EDGE_CURVE('',#14766,#14772,#14774,.T.);+#14772=VERTEX_POINT('',#14773);+#14773=CARTESIAN_POINT('',(7.298480775301,3.09,0.667364817767));+#14774=CIRCLE('',#14775,0.1);+#14775=AXIS2_PLACEMENT_3D('',#14776,#422,#13051);+#14776=CARTESIAN_POINT('',(7.2,3.09,0.65));+#14777=ORIENTED_EDGE('',*,*,#14778,.T.);+#14778=EDGE_CURVE('',#14772,#14779,#14781,.T.);+#14779=VERTEX_POINT('',#14780);+#14780=CARTESIAN_POINT('',(7.382385590716,3.09,0.165270364467));+#14781=LINE('',#14773,#13057);+#14782=ORIENTED_EDGE('',*,*,#14783,.T.);+#14783=EDGE_CURVE('',#14779,#14784,#14786,.T.);+#14784=VERTEX_POINT('',#14785);+#14785=CARTESIAN_POINT('',(7.579347141319,3.09,1.387778780781E-16));+#14786=CIRCLE('',#14787,0.2);+#14787=AXIS2_PLACEMENT_3D('',#14788,#1569,#13066);+#14788=CARTESIAN_POINT('',(7.579347141319,3.09,0.2));+#14789=ORIENTED_EDGE('',*,*,#14790,.T.);+#14790=EDGE_CURVE('',#14784,#14791,#14793,.T.);+#14791=VERTEX_POINT('',#14792);+#14792=CARTESIAN_POINT('',(8.,3.09,1.387778780781E-16));+#14793=LINE('',#14785,#49);+#14794=ORIENTED_EDGE('',*,*,#14795,.T.);+#14795=EDGE_CURVE('',#14791,#14796,#14798,.T.);+#14796=VERTEX_POINT('',#14797);+#14797=CARTESIAN_POINT('',(8.,3.09,0.1));+#14798=LINE('',#14792,#2043);+#14799=ORIENTED_EDGE('',*,*,#14800,.T.);+#14800=EDGE_CURVE('',#14796,#14801,#14803,.T.);+#14801=VERTEX_POINT('',#14802);+#14802=CARTESIAN_POINT('',(7.579347141319,3.09,0.1));+#14803=LINE('',#14797,#1576);+#14804=ORIENTED_EDGE('',*,*,#14805,.T.);+#14805=EDGE_CURVE('',#14801,#14806,#14808,.T.);+#14806=VERTEX_POINT('',#14807);+#14807=CARTESIAN_POINT('',(7.480866366018,3.09,0.182635182233));+#14808=CIRCLE('',#14809,1.E-01);+#14809=AXIS2_PLACEMENT_3D('',#14788,#422,#13088);+#14810=ORIENTED_EDGE('',*,*,#14811,.T.);+#14811=EDGE_CURVE('',#14806,#14812,#14814,.T.);+#14812=VERTEX_POINT('',#14813);+#14813=CARTESIAN_POINT('',(7.396961550602,3.09,0.684729635533));+#14814=LINE('',#14807,#13094);+#14815=ORIENTED_EDGE('',*,*,#14816,.T.);+#14816=EDGE_CURVE('',#14812,#7612,#14817,.T.);+#14817=CIRCLE('',#14818,0.2);+#14818=AXIS2_PLACEMENT_3D('',#14776,#1569,#13100);+#14819=ORIENTED_EDGE('',*,*,#7611,.T.);+#14820=PLANE('',#14821);+#14821=AXIS2_PLACEMENT_3D('',#14822,#1569,#13);+#14822=CARTESIAN_POINT('',(7.414276639233,3.09,0.410238158856));+#14823=ADVANCED_FACE('',(#14824),#14885,.T.);+#14824=FACE_BOUND('',#14825,.T.);+#14825=EDGE_LOOP('',(#14826,#14830,#14836,#14843,#14848,#14855,#14860,#14865,#14870,#14876,#14881,#7618));+#14826=ORIENTED_EDGE('',*,*,#14827,.F.);+#14827=EDGE_CURVE('',#13383,#7620,#14828,.T.);+#14828=LINE('',#14829,#2043);+#14829=CARTESIAN_POINT('',(7.,2.91,0.630119079428));+#14830=ORIENTED_EDGE('',*,*,#14831,.T.);+#14831=EDGE_CURVE('',#13383,#14832,#14834,.T.);+#14832=VERTEX_POINT('',#14833);+#14833=CARTESIAN_POINT('',(7.2,2.91,0.75));+#14834=LINE('',#14835,#49);+#14835=CARTESIAN_POINT('',(6.85,2.91,0.75));+#14836=ORIENTED_EDGE('',*,*,#14837,.T.);+#14837=EDGE_CURVE('',#14832,#14838,#14840,.T.);+#14838=VERTEX_POINT('',#14839);+#14839=CARTESIAN_POINT('',(7.298480775301,2.91,0.667364817767));+#14840=CIRCLE('',#14841,0.1);+#14841=AXIS2_PLACEMENT_3D('',#14842,#422,#13051);+#14842=CARTESIAN_POINT('',(7.2,2.91,0.65));+#14843=ORIENTED_EDGE('',*,*,#14844,.T.);+#14844=EDGE_CURVE('',#14838,#14845,#14847,.T.);+#14845=VERTEX_POINT('',#14846);+#14846=CARTESIAN_POINT('',(7.382385590716,2.91,0.165270364467));+#14847=LINE('',#14839,#13057);+#14848=ORIENTED_EDGE('',*,*,#14849,.T.);+#14849=EDGE_CURVE('',#14845,#14850,#14852,.T.);+#14850=VERTEX_POINT('',#14851);+#14851=CARTESIAN_POINT('',(7.579347141319,2.91,1.387778780781E-16));+#14852=CIRCLE('',#14853,0.2);+#14853=AXIS2_PLACEMENT_3D('',#14854,#1569,#13066);+#14854=CARTESIAN_POINT('',(7.579347141319,2.91,0.2));+#14855=ORIENTED_EDGE('',*,*,#14856,.T.);+#14856=EDGE_CURVE('',#14850,#14857,#14859,.T.);+#14857=VERTEX_POINT('',#14858);+#14858=CARTESIAN_POINT('',(8.,2.91,1.387778780781E-16));+#14859=LINE('',#14851,#49);+#14860=ORIENTED_EDGE('',*,*,#14861,.T.);+#14861=EDGE_CURVE('',#14857,#14862,#14864,.T.);+#14862=VERTEX_POINT('',#14863);+#14863=CARTESIAN_POINT('',(8.,2.91,0.1));+#14864=LINE('',#14858,#2043);+#14865=ORIENTED_EDGE('',*,*,#14866,.T.);+#14866=EDGE_CURVE('',#14862,#14867,#14869,.T.);+#14867=VERTEX_POINT('',#14868);+#14868=CARTESIAN_POINT('',(7.579347141319,2.91,0.1));+#14869=LINE('',#14863,#1576);+#14870=ORIENTED_EDGE('',*,*,#14871,.T.);+#14871=EDGE_CURVE('',#14867,#14872,#14874,.T.);+#14872=VERTEX_POINT('',#14873);+#14873=CARTESIAN_POINT('',(7.480866366018,2.91,0.182635182233));+#14874=CIRCLE('',#14875,1.E-01);+#14875=AXIS2_PLACEMENT_3D('',#14854,#422,#13088);+#14876=ORIENTED_EDGE('',*,*,#14877,.T.);+#14877=EDGE_CURVE('',#14872,#14878,#14880,.T.);+#14878=VERTEX_POINT('',#14879);+#14879=CARTESIAN_POINT('',(7.396961550602,2.91,0.684729635533));+#14880=LINE('',#14873,#13094);+#14881=ORIENTED_EDGE('',*,*,#14882,.T.);+#14882=EDGE_CURVE('',#14878,#7615,#14883,.T.);+#14883=CIRCLE('',#14884,0.2);+#14884=AXIS2_PLACEMENT_3D('',#14842,#1569,#13100);+#14885=PLANE('',#14886);+#14886=AXIS2_PLACEMENT_3D('',#14887,#1569,#13);+#14887=CARTESIAN_POINT('',(7.414276639233,2.91,0.410238158856));+#14888=ADVANCED_FACE('',(#14889),#14896,.T.);+#14889=FACE_BOUND('',#14890,.F.);+#14890=EDGE_LOOP('',(#14891,#14881,#14894,#14895));+#14891=ORIENTED_EDGE('',*,*,#14892,.T.);+#14892=EDGE_CURVE('',#14812,#14878,#14893,.T.);+#14893=LINE('',#14813,#1568);+#14894=ORIENTED_EDGE('',*,*,#7614,.F.);+#14895=ORIENTED_EDGE('',*,*,#14816,.F.);+#14896=CYLINDRICAL_SURFACE('',#14897,0.2);+#14897=AXIS2_PLACEMENT_3D('',#14776,#422,#13100);+#14898=ADVANCED_FACE('',(#14899),#7271,.F.);+#14899=FACE_BOUND('',#14900,.F.);+#14900=EDGE_LOOP('',(#14826,#14901,#14902,#14906));+#14901=ORIENTED_EDGE('',*,*,#13382,.T.);+#14902=ORIENTED_EDGE('',*,*,#14903,.T.);+#14903=EDGE_CURVE('',#13379,#7635,#14904,.T.);+#14904=LINE('',#14905,#2043);+#14905=CARTESIAN_POINT('',(7.,2.69,0.630119079428));+#14906=ORIENTED_EDGE('',*,*,#7634,.F.);+#14907=ADVANCED_FACE('',(#14908),#14967,.F.);+#14908=FACE_BOUND('',#14909,.F.);+#14909=EDGE_LOOP('',(#14910,#14911,#14917,#14924,#14929,#14936,#14941,#14946,#14951,#14957,#14962,#14966));+#14910=ORIENTED_EDGE('',*,*,#14903,.F.);+#14911=ORIENTED_EDGE('',*,*,#14912,.T.);+#14912=EDGE_CURVE('',#13379,#14913,#14915,.T.);+#14913=VERTEX_POINT('',#14914);+#14914=CARTESIAN_POINT('',(7.2,2.69,0.75));+#14915=LINE('',#14916,#49);+#14916=CARTESIAN_POINT('',(6.85,2.69,0.75));+#14917=ORIENTED_EDGE('',*,*,#14918,.T.);+#14918=EDGE_CURVE('',#14913,#14919,#14921,.T.);+#14919=VERTEX_POINT('',#14920);+#14920=CARTESIAN_POINT('',(7.298480775301,2.69,0.667364817767));+#14921=CIRCLE('',#14922,0.1);+#14922=AXIS2_PLACEMENT_3D('',#14923,#422,#13051);+#14923=CARTESIAN_POINT('',(7.2,2.69,0.65));+#14924=ORIENTED_EDGE('',*,*,#14925,.T.);+#14925=EDGE_CURVE('',#14919,#14926,#14928,.T.);+#14926=VERTEX_POINT('',#14927);+#14927=CARTESIAN_POINT('',(7.382385590716,2.69,0.165270364467));+#14928=LINE('',#14920,#13057);+#14929=ORIENTED_EDGE('',*,*,#14930,.T.);+#14930=EDGE_CURVE('',#14926,#14931,#14933,.T.);+#14931=VERTEX_POINT('',#14932);+#14932=CARTESIAN_POINT('',(7.579347141319,2.69,1.387778780781E-16));+#14933=CIRCLE('',#14934,0.2);+#14934=AXIS2_PLACEMENT_3D('',#14935,#1569,#13066);+#14935=CARTESIAN_POINT('',(7.579347141319,2.69,0.2));+#14936=ORIENTED_EDGE('',*,*,#14937,.T.);+#14937=EDGE_CURVE('',#14931,#14938,#14940,.T.);+#14938=VERTEX_POINT('',#14939);+#14939=CARTESIAN_POINT('',(8.,2.69,1.387778780781E-16));+#14940=LINE('',#14932,#49);+#14941=ORIENTED_EDGE('',*,*,#14942,.T.);+#14942=EDGE_CURVE('',#14938,#14943,#14945,.T.);+#14943=VERTEX_POINT('',#14944);+#14944=CARTESIAN_POINT('',(8.,2.69,0.1));+#14945=LINE('',#14939,#2043);+#14946=ORIENTED_EDGE('',*,*,#14947,.T.);+#14947=EDGE_CURVE('',#14943,#14948,#14950,.T.);+#14948=VERTEX_POINT('',#14949);+#14949=CARTESIAN_POINT('',(7.579347141319,2.69,0.1));+#14950=LINE('',#14944,#1576);+#14951=ORIENTED_EDGE('',*,*,#14952,.T.);+#14952=EDGE_CURVE('',#14948,#14953,#14955,.T.);+#14953=VERTEX_POINT('',#14954);+#14954=CARTESIAN_POINT('',(7.480866366018,2.69,0.182635182233));+#14955=CIRCLE('',#14956,1.E-01);+#14956=AXIS2_PLACEMENT_3D('',#14935,#422,#13088);+#14957=ORIENTED_EDGE('',*,*,#14958,.T.);+#14958=EDGE_CURVE('',#14953,#14959,#14961,.T.);+#14959=VERTEX_POINT('',#14960);+#14960=CARTESIAN_POINT('',(7.396961550602,2.69,0.684729635533));+#14961=LINE('',#14954,#13094);+#14962=ORIENTED_EDGE('',*,*,#14963,.T.);+#14963=EDGE_CURVE('',#14959,#7647,#14964,.T.);+#14964=CIRCLE('',#14965,0.2);+#14965=AXIS2_PLACEMENT_3D('',#14923,#1569,#13100);+#14966=ORIENTED_EDGE('',*,*,#7646,.T.);+#14967=PLANE('',#14968);+#14968=AXIS2_PLACEMENT_3D('',#14969,#1569,#13);+#14969=CARTESIAN_POINT('',(7.414276639233,2.69,0.410238158856));+#14970=ADVANCED_FACE('',(#14971),#15032,.T.);+#14971=FACE_BOUND('',#14972,.T.);+#14972=EDGE_LOOP('',(#14973,#14977,#14983,#14990,#14995,#15002,#15007,#15012,#15017,#15023,#15028,#7653));+#14973=ORIENTED_EDGE('',*,*,#14974,.F.);+#14974=EDGE_CURVE('',#13375,#7655,#14975,.T.);+#14975=LINE('',#14976,#2043);+#14976=CARTESIAN_POINT('',(7.,2.51,0.630119079428));+#14977=ORIENTED_EDGE('',*,*,#14978,.T.);+#14978=EDGE_CURVE('',#13375,#14979,#14981,.T.);+#14979=VERTEX_POINT('',#14980);+#14980=CARTESIAN_POINT('',(7.2,2.51,0.75));+#14981=LINE('',#14982,#49);+#14982=CARTESIAN_POINT('',(6.85,2.51,0.75));+#14983=ORIENTED_EDGE('',*,*,#14984,.T.);+#14984=EDGE_CURVE('',#14979,#14985,#14987,.T.);+#14985=VERTEX_POINT('',#14986);+#14986=CARTESIAN_POINT('',(7.298480775301,2.51,0.667364817767));+#14987=CIRCLE('',#14988,0.1);+#14988=AXIS2_PLACEMENT_3D('',#14989,#422,#13051);+#14989=CARTESIAN_POINT('',(7.2,2.51,0.65));+#14990=ORIENTED_EDGE('',*,*,#14991,.T.);+#14991=EDGE_CURVE('',#14985,#14992,#14994,.T.);+#14992=VERTEX_POINT('',#14993);+#14993=CARTESIAN_POINT('',(7.382385590716,2.51,0.165270364467));+#14994=LINE('',#14986,#13057);+#14995=ORIENTED_EDGE('',*,*,#14996,.T.);+#14996=EDGE_CURVE('',#14992,#14997,#14999,.T.);+#14997=VERTEX_POINT('',#14998);+#14998=CARTESIAN_POINT('',(7.579347141319,2.51,1.387778780781E-16));+#14999=CIRCLE('',#15000,0.2);+#15000=AXIS2_PLACEMENT_3D('',#15001,#1569,#13066);+#15001=CARTESIAN_POINT('',(7.579347141319,2.51,0.2));+#15002=ORIENTED_EDGE('',*,*,#15003,.T.);+#15003=EDGE_CURVE('',#14997,#15004,#15006,.T.);+#15004=VERTEX_POINT('',#15005);+#15005=CARTESIAN_POINT('',(8.,2.51,1.387778780781E-16));+#15006=LINE('',#14998,#49);+#15007=ORIENTED_EDGE('',*,*,#15008,.T.);+#15008=EDGE_CURVE('',#15004,#15009,#15011,.T.);+#15009=VERTEX_POINT('',#15010);+#15010=CARTESIAN_POINT('',(8.,2.51,0.1));+#15011=LINE('',#15005,#2043);+#15012=ORIENTED_EDGE('',*,*,#15013,.T.);+#15013=EDGE_CURVE('',#15009,#15014,#15016,.T.);+#15014=VERTEX_POINT('',#15015);+#15015=CARTESIAN_POINT('',(7.579347141319,2.51,0.1));+#15016=LINE('',#15010,#1576);+#15017=ORIENTED_EDGE('',*,*,#15018,.T.);+#15018=EDGE_CURVE('',#15014,#15019,#15021,.T.);+#15019=VERTEX_POINT('',#15020);+#15020=CARTESIAN_POINT('',(7.480866366018,2.51,0.182635182233));+#15021=CIRCLE('',#15022,1.E-01);+#15022=AXIS2_PLACEMENT_3D('',#15001,#422,#13088);+#15023=ORIENTED_EDGE('',*,*,#15024,.T.);+#15024=EDGE_CURVE('',#15019,#15025,#15027,.T.);+#15025=VERTEX_POINT('',#15026);+#15026=CARTESIAN_POINT('',(7.396961550602,2.51,0.684729635533));+#15027=LINE('',#15020,#13094);+#15028=ORIENTED_EDGE('',*,*,#15029,.T.);+#15029=EDGE_CURVE('',#15025,#7650,#15030,.T.);+#15030=CIRCLE('',#15031,0.2);+#15031=AXIS2_PLACEMENT_3D('',#14989,#1569,#13100);+#15032=PLANE('',#15033);+#15033=AXIS2_PLACEMENT_3D('',#15034,#1569,#13);+#15034=CARTESIAN_POINT('',(7.414276639233,2.51,0.410238158856));+#15035=ADVANCED_FACE('',(#15036),#15043,.T.);+#15036=FACE_BOUND('',#15037,.F.);+#15037=EDGE_LOOP('',(#15038,#15028,#15041,#15042));+#15038=ORIENTED_EDGE('',*,*,#15039,.T.);+#15039=EDGE_CURVE('',#14959,#15025,#15040,.T.);+#15040=LINE('',#14960,#1568);+#15041=ORIENTED_EDGE('',*,*,#7649,.F.);+#15042=ORIENTED_EDGE('',*,*,#14963,.F.);+#15043=CYLINDRICAL_SURFACE('',#15044,0.2);+#15044=AXIS2_PLACEMENT_3D('',#14923,#422,#13100);+#15045=ADVANCED_FACE('',(#15046),#7271,.F.);+#15046=FACE_BOUND('',#15047,.F.);+#15047=EDGE_LOOP('',(#14973,#15048,#15049,#15053));+#15048=ORIENTED_EDGE('',*,*,#13374,.T.);+#15049=ORIENTED_EDGE('',*,*,#15050,.T.);+#15050=EDGE_CURVE('',#13371,#7670,#15051,.T.);+#15051=LINE('',#15052,#2043);+#15052=CARTESIAN_POINT('',(7.,2.29,0.630119079428));+#15053=ORIENTED_EDGE('',*,*,#7669,.F.);+#15054=ADVANCED_FACE('',(#15055),#15114,.F.);+#15055=FACE_BOUND('',#15056,.F.);+#15056=EDGE_LOOP('',(#15057,#15058,#15064,#15071,#15076,#15083,#15088,#15093,#15098,#15104,#15109,#15113));+#15057=ORIENTED_EDGE('',*,*,#15050,.F.);+#15058=ORIENTED_EDGE('',*,*,#15059,.T.);+#15059=EDGE_CURVE('',#13371,#15060,#15062,.T.);+#15060=VERTEX_POINT('',#15061);+#15061=CARTESIAN_POINT('',(7.2,2.29,0.75));+#15062=LINE('',#15063,#49);+#15063=CARTESIAN_POINT('',(6.85,2.29,0.75));+#15064=ORIENTED_EDGE('',*,*,#15065,.T.);+#15065=EDGE_CURVE('',#15060,#15066,#15068,.T.);+#15066=VERTEX_POINT('',#15067);+#15067=CARTESIAN_POINT('',(7.298480775301,2.29,0.667364817767));+#15068=CIRCLE('',#15069,0.1);+#15069=AXIS2_PLACEMENT_3D('',#15070,#422,#13051);+#15070=CARTESIAN_POINT('',(7.2,2.29,0.65));+#15071=ORIENTED_EDGE('',*,*,#15072,.T.);+#15072=EDGE_CURVE('',#15066,#15073,#15075,.T.);+#15073=VERTEX_POINT('',#15074);+#15074=CARTESIAN_POINT('',(7.382385590716,2.29,0.165270364467));+#15075=LINE('',#15067,#13057);+#15076=ORIENTED_EDGE('',*,*,#15077,.T.);+#15077=EDGE_CURVE('',#15073,#15078,#15080,.T.);+#15078=VERTEX_POINT('',#15079);+#15079=CARTESIAN_POINT('',(7.579347141319,2.29,1.387778780781E-16));+#15080=CIRCLE('',#15081,0.2);+#15081=AXIS2_PLACEMENT_3D('',#15082,#1569,#13066);+#15082=CARTESIAN_POINT('',(7.579347141319,2.29,0.2));+#15083=ORIENTED_EDGE('',*,*,#15084,.T.);+#15084=EDGE_CURVE('',#15078,#15085,#15087,.T.);+#15085=VERTEX_POINT('',#15086);+#15086=CARTESIAN_POINT('',(8.,2.29,1.387778780781E-16));+#15087=LINE('',#15079,#49);+#15088=ORIENTED_EDGE('',*,*,#15089,.T.);+#15089=EDGE_CURVE('',#15085,#15090,#15092,.T.);+#15090=VERTEX_POINT('',#15091);+#15091=CARTESIAN_POINT('',(8.,2.29,0.1));+#15092=LINE('',#15086,#2043);+#15093=ORIENTED_EDGE('',*,*,#15094,.T.);+#15094=EDGE_CURVE('',#15090,#15095,#15097,.T.);+#15095=VERTEX_POINT('',#15096);+#15096=CARTESIAN_POINT('',(7.579347141319,2.29,0.1));+#15097=LINE('',#15091,#1576);+#15098=ORIENTED_EDGE('',*,*,#15099,.T.);+#15099=EDGE_CURVE('',#15095,#15100,#15102,.T.);+#15100=VERTEX_POINT('',#15101);+#15101=CARTESIAN_POINT('',(7.480866366018,2.29,0.182635182233));+#15102=CIRCLE('',#15103,1.E-01);+#15103=AXIS2_PLACEMENT_3D('',#15082,#422,#13088);+#15104=ORIENTED_EDGE('',*,*,#15105,.T.);+#15105=EDGE_CURVE('',#15100,#15106,#15108,.T.);+#15106=VERTEX_POINT('',#15107);+#15107=CARTESIAN_POINT('',(7.396961550602,2.29,0.684729635533));+#15108=LINE('',#15101,#13094);+#15109=ORIENTED_EDGE('',*,*,#15110,.T.);+#15110=EDGE_CURVE('',#15106,#7682,#15111,.T.);+#15111=CIRCLE('',#15112,0.2);+#15112=AXIS2_PLACEMENT_3D('',#15070,#1569,#13100);+#15113=ORIENTED_EDGE('',*,*,#7681,.T.);+#15114=PLANE('',#15115);+#15115=AXIS2_PLACEMENT_3D('',#15116,#1569,#13);+#15116=CARTESIAN_POINT('',(7.414276639233,2.29,0.410238158856));+#15117=ADVANCED_FACE('',(#15118),#15179,.T.);+#15118=FACE_BOUND('',#15119,.T.);+#15119=EDGE_LOOP('',(#15120,#15124,#15130,#15137,#15142,#15149,#15154,#15159,#15164,#15170,#15175,#7688));+#15120=ORIENTED_EDGE('',*,*,#15121,.F.);+#15121=EDGE_CURVE('',#13367,#7690,#15122,.T.);+#15122=LINE('',#15123,#2043);+#15123=CARTESIAN_POINT('',(7.,2.11,0.630119079428));+#15124=ORIENTED_EDGE('',*,*,#15125,.T.);+#15125=EDGE_CURVE('',#13367,#15126,#15128,.T.);+#15126=VERTEX_POINT('',#15127);+#15127=CARTESIAN_POINT('',(7.2,2.11,0.75));+#15128=LINE('',#15129,#49);+#15129=CARTESIAN_POINT('',(6.85,2.11,0.75));+#15130=ORIENTED_EDGE('',*,*,#15131,.T.);+#15131=EDGE_CURVE('',#15126,#15132,#15134,.T.);+#15132=VERTEX_POINT('',#15133);+#15133=CARTESIAN_POINT('',(7.298480775301,2.11,0.667364817767));+#15134=CIRCLE('',#15135,0.1);+#15135=AXIS2_PLACEMENT_3D('',#15136,#422,#13051);+#15136=CARTESIAN_POINT('',(7.2,2.11,0.65));+#15137=ORIENTED_EDGE('',*,*,#15138,.T.);+#15138=EDGE_CURVE('',#15132,#15139,#15141,.T.);+#15139=VERTEX_POINT('',#15140);+#15140=CARTESIAN_POINT('',(7.382385590716,2.11,0.165270364467));+#15141=LINE('',#15133,#13057);+#15142=ORIENTED_EDGE('',*,*,#15143,.T.);+#15143=EDGE_CURVE('',#15139,#15144,#15146,.T.);+#15144=VERTEX_POINT('',#15145);+#15145=CARTESIAN_POINT('',(7.579347141319,2.11,1.387778780781E-16));+#15146=CIRCLE('',#15147,0.2);+#15147=AXIS2_PLACEMENT_3D('',#15148,#1569,#13066);+#15148=CARTESIAN_POINT('',(7.579347141319,2.11,0.2));+#15149=ORIENTED_EDGE('',*,*,#15150,.T.);+#15150=EDGE_CURVE('',#15144,#15151,#15153,.T.);+#15151=VERTEX_POINT('',#15152);+#15152=CARTESIAN_POINT('',(8.,2.11,1.387778780781E-16));+#15153=LINE('',#15145,#49);+#15154=ORIENTED_EDGE('',*,*,#15155,.T.);+#15155=EDGE_CURVE('',#15151,#15156,#15158,.T.);+#15156=VERTEX_POINT('',#15157);+#15157=CARTESIAN_POINT('',(8.,2.11,0.1));+#15158=LINE('',#15152,#2043);+#15159=ORIENTED_EDGE('',*,*,#15160,.T.);+#15160=EDGE_CURVE('',#15156,#15161,#15163,.T.);+#15161=VERTEX_POINT('',#15162);+#15162=CARTESIAN_POINT('',(7.579347141319,2.11,0.1));+#15163=LINE('',#15157,#1576);+#15164=ORIENTED_EDGE('',*,*,#15165,.T.);+#15165=EDGE_CURVE('',#15161,#15166,#15168,.T.);+#15166=VERTEX_POINT('',#15167);+#15167=CARTESIAN_POINT('',(7.480866366018,2.11,0.182635182233));+#15168=CIRCLE('',#15169,1.E-01);+#15169=AXIS2_PLACEMENT_3D('',#15148,#422,#13088);+#15170=ORIENTED_EDGE('',*,*,#15171,.T.);+#15171=EDGE_CURVE('',#15166,#15172,#15174,.T.);+#15172=VERTEX_POINT('',#15173);+#15173=CARTESIAN_POINT('',(7.396961550602,2.11,0.684729635533));+#15174=LINE('',#15167,#13094);+#15175=ORIENTED_EDGE('',*,*,#15176,.T.);+#15176=EDGE_CURVE('',#15172,#7685,#15177,.T.);+#15177=CIRCLE('',#15178,0.2);+#15178=AXIS2_PLACEMENT_3D('',#15136,#1569,#13100);+#15179=PLANE('',#15180);+#15180=AXIS2_PLACEMENT_3D('',#15181,#1569,#13);+#15181=CARTESIAN_POINT('',(7.414276639233,2.11,0.410238158856));+#15182=ADVANCED_FACE('',(#15183),#15190,.T.);+#15183=FACE_BOUND('',#15184,.F.);+#15184=EDGE_LOOP('',(#15185,#15175,#15188,#15189));+#15185=ORIENTED_EDGE('',*,*,#15186,.T.);+#15186=EDGE_CURVE('',#15106,#15172,#15187,.T.);+#15187=LINE('',#15107,#1568);+#15188=ORIENTED_EDGE('',*,*,#7684,.F.);+#15189=ORIENTED_EDGE('',*,*,#15110,.F.);+#15190=CYLINDRICAL_SURFACE('',#15191,0.2);+#15191=AXIS2_PLACEMENT_3D('',#15070,#422,#13100);+#15192=ADVANCED_FACE('',(#15193),#7271,.F.);+#15193=FACE_BOUND('',#15194,.F.);+#15194=EDGE_LOOP('',(#15120,#15195,#15196,#15200));+#15195=ORIENTED_EDGE('',*,*,#13366,.T.);+#15196=ORIENTED_EDGE('',*,*,#15197,.T.);+#15197=EDGE_CURVE('',#13363,#7705,#15198,.T.);+#15198=LINE('',#15199,#2043);+#15199=CARTESIAN_POINT('',(7.,1.89,0.630119079428));+#15200=ORIENTED_EDGE('',*,*,#7704,.F.);+#15201=ADVANCED_FACE('',(#15202),#15261,.F.);+#15202=FACE_BOUND('',#15203,.F.);+#15203=EDGE_LOOP('',(#15204,#15205,#15211,#15218,#15223,#15230,#15235,#15240,#15245,#15251,#15256,#15260));+#15204=ORIENTED_EDGE('',*,*,#15197,.F.);+#15205=ORIENTED_EDGE('',*,*,#15206,.T.);+#15206=EDGE_CURVE('',#13363,#15207,#15209,.T.);+#15207=VERTEX_POINT('',#15208);+#15208=CARTESIAN_POINT('',(7.2,1.89,0.75));+#15209=LINE('',#15210,#49);+#15210=CARTESIAN_POINT('',(6.85,1.89,0.75));+#15211=ORIENTED_EDGE('',*,*,#15212,.T.);+#15212=EDGE_CURVE('',#15207,#15213,#15215,.T.);+#15213=VERTEX_POINT('',#15214);+#15214=CARTESIAN_POINT('',(7.298480775301,1.89,0.667364817767));+#15215=CIRCLE('',#15216,0.1);+#15216=AXIS2_PLACEMENT_3D('',#15217,#422,#13051);+#15217=CARTESIAN_POINT('',(7.2,1.89,0.65));+#15218=ORIENTED_EDGE('',*,*,#15219,.T.);+#15219=EDGE_CURVE('',#15213,#15220,#15222,.T.);+#15220=VERTEX_POINT('',#15221);+#15221=CARTESIAN_POINT('',(7.382385590716,1.89,0.165270364467));+#15222=LINE('',#15214,#13057);+#15223=ORIENTED_EDGE('',*,*,#15224,.T.);+#15224=EDGE_CURVE('',#15220,#15225,#15227,.T.);+#15225=VERTEX_POINT('',#15226);+#15226=CARTESIAN_POINT('',(7.579347141319,1.89,1.387778780781E-16));+#15227=CIRCLE('',#15228,0.2);+#15228=AXIS2_PLACEMENT_3D('',#15229,#1569,#13066);+#15229=CARTESIAN_POINT('',(7.579347141319,1.89,0.2));+#15230=ORIENTED_EDGE('',*,*,#15231,.T.);+#15231=EDGE_CURVE('',#15225,#15232,#15234,.T.);+#15232=VERTEX_POINT('',#15233);+#15233=CARTESIAN_POINT('',(8.,1.89,1.387778780781E-16));+#15234=LINE('',#15226,#49);+#15235=ORIENTED_EDGE('',*,*,#15236,.T.);+#15236=EDGE_CURVE('',#15232,#15237,#15239,.T.);+#15237=VERTEX_POINT('',#15238);+#15238=CARTESIAN_POINT('',(8.,1.89,0.1));+#15239=LINE('',#15233,#2043);+#15240=ORIENTED_EDGE('',*,*,#15241,.T.);+#15241=EDGE_CURVE('',#15237,#15242,#15244,.T.);+#15242=VERTEX_POINT('',#15243);+#15243=CARTESIAN_POINT('',(7.579347141319,1.89,0.1));+#15244=LINE('',#15238,#1576);+#15245=ORIENTED_EDGE('',*,*,#15246,.T.);+#15246=EDGE_CURVE('',#15242,#15247,#15249,.T.);+#15247=VERTEX_POINT('',#15248);+#15248=CARTESIAN_POINT('',(7.480866366018,1.89,0.182635182233));+#15249=CIRCLE('',#15250,1.E-01);+#15250=AXIS2_PLACEMENT_3D('',#15229,#422,#13088);+#15251=ORIENTED_EDGE('',*,*,#15252,.T.);+#15252=EDGE_CURVE('',#15247,#15253,#15255,.T.);+#15253=VERTEX_POINT('',#15254);+#15254=CARTESIAN_POINT('',(7.396961550602,1.89,0.684729635533));+#15255=LINE('',#15248,#13094);+#15256=ORIENTED_EDGE('',*,*,#15257,.T.);+#15257=EDGE_CURVE('',#15253,#7717,#15258,.T.);+#15258=CIRCLE('',#15259,0.2);+#15259=AXIS2_PLACEMENT_3D('',#15217,#1569,#13100);+#15260=ORIENTED_EDGE('',*,*,#7716,.T.);+#15261=PLANE('',#15262);+#15262=AXIS2_PLACEMENT_3D('',#15263,#1569,#13);+#15263=CARTESIAN_POINT('',(7.414276639233,1.89,0.410238158856));+#15264=ADVANCED_FACE('',(#15265),#15326,.T.);+#15265=FACE_BOUND('',#15266,.T.);+#15266=EDGE_LOOP('',(#15267,#15271,#15277,#15284,#15289,#15296,#15301,#15306,#15311,#15317,#15322,#7723));+#15267=ORIENTED_EDGE('',*,*,#15268,.F.);+#15268=EDGE_CURVE('',#13359,#7725,#15269,.T.);+#15269=LINE('',#15270,#2043);+#15270=CARTESIAN_POINT('',(7.,1.71,0.630119079428));+#15271=ORIENTED_EDGE('',*,*,#15272,.T.);+#15272=EDGE_CURVE('',#13359,#15273,#15275,.T.);+#15273=VERTEX_POINT('',#15274);+#15274=CARTESIAN_POINT('',(7.2,1.71,0.75));+#15275=LINE('',#15276,#49);+#15276=CARTESIAN_POINT('',(6.85,1.71,0.75));+#15277=ORIENTED_EDGE('',*,*,#15278,.T.);+#15278=EDGE_CURVE('',#15273,#15279,#15281,.T.);+#15279=VERTEX_POINT('',#15280);+#15280=CARTESIAN_POINT('',(7.298480775301,1.71,0.667364817767));+#15281=CIRCLE('',#15282,0.1);+#15282=AXIS2_PLACEMENT_3D('',#15283,#422,#13051);+#15283=CARTESIAN_POINT('',(7.2,1.71,0.65));+#15284=ORIENTED_EDGE('',*,*,#15285,.T.);+#15285=EDGE_CURVE('',#15279,#15286,#15288,.T.);+#15286=VERTEX_POINT('',#15287);+#15287=CARTESIAN_POINT('',(7.382385590716,1.71,0.165270364467));+#15288=LINE('',#15280,#13057);+#15289=ORIENTED_EDGE('',*,*,#15290,.T.);+#15290=EDGE_CURVE('',#15286,#15291,#15293,.T.);+#15291=VERTEX_POINT('',#15292);+#15292=CARTESIAN_POINT('',(7.579347141319,1.71,1.387778780781E-16));+#15293=CIRCLE('',#15294,0.2);+#15294=AXIS2_PLACEMENT_3D('',#15295,#1569,#13066);+#15295=CARTESIAN_POINT('',(7.579347141319,1.71,0.2));+#15296=ORIENTED_EDGE('',*,*,#15297,.T.);+#15297=EDGE_CURVE('',#15291,#15298,#15300,.T.);+#15298=VERTEX_POINT('',#15299);+#15299=CARTESIAN_POINT('',(8.,1.71,1.387778780781E-16));+#15300=LINE('',#15292,#49);+#15301=ORIENTED_EDGE('',*,*,#15302,.T.);+#15302=EDGE_CURVE('',#15298,#15303,#15305,.T.);+#15303=VERTEX_POINT('',#15304);+#15304=CARTESIAN_POINT('',(8.,1.71,0.1));+#15305=LINE('',#15299,#2043);+#15306=ORIENTED_EDGE('',*,*,#15307,.T.);+#15307=EDGE_CURVE('',#15303,#15308,#15310,.T.);+#15308=VERTEX_POINT('',#15309);+#15309=CARTESIAN_POINT('',(7.579347141319,1.71,0.1));+#15310=LINE('',#15304,#1576);+#15311=ORIENTED_EDGE('',*,*,#15312,.T.);+#15312=EDGE_CURVE('',#15308,#15313,#15315,.T.);+#15313=VERTEX_POINT('',#15314);+#15314=CARTESIAN_POINT('',(7.480866366018,1.71,0.182635182233));+#15315=CIRCLE('',#15316,1.E-01);+#15316=AXIS2_PLACEMENT_3D('',#15295,#422,#13088);+#15317=ORIENTED_EDGE('',*,*,#15318,.T.);+#15318=EDGE_CURVE('',#15313,#15319,#15321,.T.);+#15319=VERTEX_POINT('',#15320);+#15320=CARTESIAN_POINT('',(7.396961550602,1.71,0.684729635533));+#15321=LINE('',#15314,#13094);+#15322=ORIENTED_EDGE('',*,*,#15323,.T.);+#15323=EDGE_CURVE('',#15319,#7720,#15324,.T.);+#15324=CIRCLE('',#15325,0.2);+#15325=AXIS2_PLACEMENT_3D('',#15283,#1569,#13100);+#15326=PLANE('',#15327);+#15327=AXIS2_PLACEMENT_3D('',#15328,#1569,#13);+#15328=CARTESIAN_POINT('',(7.414276639233,1.71,0.410238158856));+#15329=ADVANCED_FACE('',(#15330),#15337,.T.);+#15330=FACE_BOUND('',#15331,.F.);+#15331=EDGE_LOOP('',(#15332,#15322,#15335,#15336));+#15332=ORIENTED_EDGE('',*,*,#15333,.T.);+#15333=EDGE_CURVE('',#15253,#15319,#15334,.T.);+#15334=LINE('',#15254,#1568);+#15335=ORIENTED_EDGE('',*,*,#7719,.F.);+#15336=ORIENTED_EDGE('',*,*,#15257,.F.);+#15337=CYLINDRICAL_SURFACE('',#15338,0.2);+#15338=AXIS2_PLACEMENT_3D('',#15217,#422,#13100);+#15339=ADVANCED_FACE('',(#15340),#7271,.F.);+#15340=FACE_BOUND('',#15341,.F.);+#15341=EDGE_LOOP('',(#15267,#15342,#15343,#15347));+#15342=ORIENTED_EDGE('',*,*,#13358,.T.);+#15343=ORIENTED_EDGE('',*,*,#15344,.T.);+#15344=EDGE_CURVE('',#13355,#7740,#15345,.T.);+#15345=LINE('',#15346,#2043);+#15346=CARTESIAN_POINT('',(7.,1.49,0.630119079428));+#15347=ORIENTED_EDGE('',*,*,#7739,.F.);+#15348=ADVANCED_FACE('',(#15349),#15408,.F.);+#15349=FACE_BOUND('',#15350,.F.);+#15350=EDGE_LOOP('',(#15351,#15352,#15358,#15365,#15370,#15377,#15382,#15387,#15392,#15398,#15403,#15407));+#15351=ORIENTED_EDGE('',*,*,#15344,.F.);+#15352=ORIENTED_EDGE('',*,*,#15353,.T.);+#15353=EDGE_CURVE('',#13355,#15354,#15356,.T.);+#15354=VERTEX_POINT('',#15355);+#15355=CARTESIAN_POINT('',(7.2,1.49,0.75));+#15356=LINE('',#15357,#49);+#15357=CARTESIAN_POINT('',(6.85,1.49,0.75));+#15358=ORIENTED_EDGE('',*,*,#15359,.T.);+#15359=EDGE_CURVE('',#15354,#15360,#15362,.T.);+#15360=VERTEX_POINT('',#15361);+#15361=CARTESIAN_POINT('',(7.298480775301,1.49,0.667364817767));+#15362=CIRCLE('',#15363,0.1);+#15363=AXIS2_PLACEMENT_3D('',#15364,#422,#13051);+#15364=CARTESIAN_POINT('',(7.2,1.49,0.65));+#15365=ORIENTED_EDGE('',*,*,#15366,.T.);+#15366=EDGE_CURVE('',#15360,#15367,#15369,.T.);+#15367=VERTEX_POINT('',#15368);+#15368=CARTESIAN_POINT('',(7.382385590716,1.49,0.165270364467));+#15369=LINE('',#15361,#13057);+#15370=ORIENTED_EDGE('',*,*,#15371,.T.);+#15371=EDGE_CURVE('',#15367,#15372,#15374,.T.);+#15372=VERTEX_POINT('',#15373);+#15373=CARTESIAN_POINT('',(7.579347141319,1.49,1.387778780781E-16));+#15374=CIRCLE('',#15375,0.2);+#15375=AXIS2_PLACEMENT_3D('',#15376,#1569,#13066);+#15376=CARTESIAN_POINT('',(7.579347141319,1.49,0.2));+#15377=ORIENTED_EDGE('',*,*,#15378,.T.);+#15378=EDGE_CURVE('',#15372,#15379,#15381,.T.);+#15379=VERTEX_POINT('',#15380);+#15380=CARTESIAN_POINT('',(8.,1.49,1.387778780781E-16));+#15381=LINE('',#15373,#49);+#15382=ORIENTED_EDGE('',*,*,#15383,.T.);+#15383=EDGE_CURVE('',#15379,#15384,#15386,.T.);+#15384=VERTEX_POINT('',#15385);+#15385=CARTESIAN_POINT('',(8.,1.49,0.1));+#15386=LINE('',#15380,#2043);+#15387=ORIENTED_EDGE('',*,*,#15388,.T.);+#15388=EDGE_CURVE('',#15384,#15389,#15391,.T.);+#15389=VERTEX_POINT('',#15390);+#15390=CARTESIAN_POINT('',(7.579347141319,1.49,0.1));+#15391=LINE('',#15385,#1576);+#15392=ORIENTED_EDGE('',*,*,#15393,.T.);+#15393=EDGE_CURVE('',#15389,#15394,#15396,.T.);+#15394=VERTEX_POINT('',#15395);+#15395=CARTESIAN_POINT('',(7.480866366018,1.49,0.182635182233));+#15396=CIRCLE('',#15397,1.E-01);+#15397=AXIS2_PLACEMENT_3D('',#15376,#422,#13088);+#15398=ORIENTED_EDGE('',*,*,#15399,.T.);+#15399=EDGE_CURVE('',#15394,#15400,#15402,.T.);+#15400=VERTEX_POINT('',#15401);+#15401=CARTESIAN_POINT('',(7.396961550602,1.49,0.684729635533));+#15402=LINE('',#15395,#13094);+#15403=ORIENTED_EDGE('',*,*,#15404,.T.);+#15404=EDGE_CURVE('',#15400,#7752,#15405,.T.);+#15405=CIRCLE('',#15406,0.2);+#15406=AXIS2_PLACEMENT_3D('',#15364,#1569,#13100);+#15407=ORIENTED_EDGE('',*,*,#7751,.T.);+#15408=PLANE('',#15409);+#15409=AXIS2_PLACEMENT_3D('',#15410,#1569,#13);+#15410=CARTESIAN_POINT('',(7.414276639233,1.49,0.410238158856));+#15411=ADVANCED_FACE('',(#15412),#15473,.T.);+#15412=FACE_BOUND('',#15413,.T.);+#15413=EDGE_LOOP('',(#15414,#15418,#15424,#15431,#15436,#15443,#15448,#15453,#15458,#15464,#15469,#7758));+#15414=ORIENTED_EDGE('',*,*,#15415,.F.);+#15415=EDGE_CURVE('',#13351,#7760,#15416,.T.);+#15416=LINE('',#15417,#2043);+#15417=CARTESIAN_POINT('',(7.,1.31,0.630119079428));+#15418=ORIENTED_EDGE('',*,*,#15419,.T.);+#15419=EDGE_CURVE('',#13351,#15420,#15422,.T.);+#15420=VERTEX_POINT('',#15421);+#15421=CARTESIAN_POINT('',(7.2,1.31,0.75));+#15422=LINE('',#15423,#49);+#15423=CARTESIAN_POINT('',(6.85,1.31,0.75));+#15424=ORIENTED_EDGE('',*,*,#15425,.T.);+#15425=EDGE_CURVE('',#15420,#15426,#15428,.T.);+#15426=VERTEX_POINT('',#15427);+#15427=CARTESIAN_POINT('',(7.298480775301,1.31,0.667364817767));+#15428=CIRCLE('',#15429,0.1);+#15429=AXIS2_PLACEMENT_3D('',#15430,#422,#13051);+#15430=CARTESIAN_POINT('',(7.2,1.31,0.65));+#15431=ORIENTED_EDGE('',*,*,#15432,.T.);+#15432=EDGE_CURVE('',#15426,#15433,#15435,.T.);+#15433=VERTEX_POINT('',#15434);+#15434=CARTESIAN_POINT('',(7.382385590716,1.31,0.165270364467));+#15435=LINE('',#15427,#13057);+#15436=ORIENTED_EDGE('',*,*,#15437,.T.);+#15437=EDGE_CURVE('',#15433,#15438,#15440,.T.);+#15438=VERTEX_POINT('',#15439);+#15439=CARTESIAN_POINT('',(7.579347141319,1.31,1.387778780781E-16));+#15440=CIRCLE('',#15441,0.2);+#15441=AXIS2_PLACEMENT_3D('',#15442,#1569,#13066);+#15442=CARTESIAN_POINT('',(7.579347141319,1.31,0.2));+#15443=ORIENTED_EDGE('',*,*,#15444,.T.);+#15444=EDGE_CURVE('',#15438,#15445,#15447,.T.);+#15445=VERTEX_POINT('',#15446);+#15446=CARTESIAN_POINT('',(8.,1.31,1.387778780781E-16));+#15447=LINE('',#15439,#49);+#15448=ORIENTED_EDGE('',*,*,#15449,.T.);+#15449=EDGE_CURVE('',#15445,#15450,#15452,.T.);+#15450=VERTEX_POINT('',#15451);+#15451=CARTESIAN_POINT('',(8.,1.31,0.1));+#15452=LINE('',#15446,#2043);+#15453=ORIENTED_EDGE('',*,*,#15454,.T.);+#15454=EDGE_CURVE('',#15450,#15455,#15457,.T.);+#15455=VERTEX_POINT('',#15456);+#15456=CARTESIAN_POINT('',(7.579347141319,1.31,0.1));+#15457=LINE('',#15451,#1576);+#15458=ORIENTED_EDGE('',*,*,#15459,.T.);+#15459=EDGE_CURVE('',#15455,#15460,#15462,.T.);+#15460=VERTEX_POINT('',#15461);+#15461=CARTESIAN_POINT('',(7.480866366018,1.31,0.182635182233));+#15462=CIRCLE('',#15463,1.E-01);+#15463=AXIS2_PLACEMENT_3D('',#15442,#422,#13088);+#15464=ORIENTED_EDGE('',*,*,#15465,.T.);+#15465=EDGE_CURVE('',#15460,#15466,#15468,.T.);+#15466=VERTEX_POINT('',#15467);+#15467=CARTESIAN_POINT('',(7.396961550602,1.31,0.684729635533));+#15468=LINE('',#15461,#13094);+#15469=ORIENTED_EDGE('',*,*,#15470,.T.);+#15470=EDGE_CURVE('',#15466,#7755,#15471,.T.);+#15471=CIRCLE('',#15472,0.2);+#15472=AXIS2_PLACEMENT_3D('',#15430,#1569,#13100);+#15473=PLANE('',#15474);+#15474=AXIS2_PLACEMENT_3D('',#15475,#1569,#13);+#15475=CARTESIAN_POINT('',(7.414276639233,1.31,0.410238158856));+#15476=ADVANCED_FACE('',(#15477),#15484,.T.);+#15477=FACE_BOUND('',#15478,.F.);+#15478=EDGE_LOOP('',(#15479,#15469,#15482,#15483));+#15479=ORIENTED_EDGE('',*,*,#15480,.T.);+#15480=EDGE_CURVE('',#15400,#15466,#15481,.T.);+#15481=LINE('',#15401,#1568);+#15482=ORIENTED_EDGE('',*,*,#7754,.F.);+#15483=ORIENTED_EDGE('',*,*,#15404,.F.);+#15484=CYLINDRICAL_SURFACE('',#15485,0.2);+#15485=AXIS2_PLACEMENT_3D('',#15364,#422,#13100);+#15486=ADVANCED_FACE('',(#15487),#7271,.F.);+#15487=FACE_BOUND('',#15488,.F.);+#15488=EDGE_LOOP('',(#15414,#15489,#15490,#15494));+#15489=ORIENTED_EDGE('',*,*,#13350,.T.);+#15490=ORIENTED_EDGE('',*,*,#15491,.T.);+#15491=EDGE_CURVE('',#13347,#7775,#15492,.T.);+#15492=LINE('',#15493,#2043);+#15493=CARTESIAN_POINT('',(7.,1.09,0.630119079428));+#15494=ORIENTED_EDGE('',*,*,#7774,.F.);+#15495=ADVANCED_FACE('',(#15496),#15555,.F.);+#15496=FACE_BOUND('',#15497,.F.);+#15497=EDGE_LOOP('',(#15498,#15499,#15505,#15512,#15517,#15524,#15529,#15534,#15539,#15545,#15550,#15554));+#15498=ORIENTED_EDGE('',*,*,#15491,.F.);+#15499=ORIENTED_EDGE('',*,*,#15500,.T.);+#15500=EDGE_CURVE('',#13347,#15501,#15503,.T.);+#15501=VERTEX_POINT('',#15502);+#15502=CARTESIAN_POINT('',(7.2,1.09,0.75));+#15503=LINE('',#15504,#49);+#15504=CARTESIAN_POINT('',(6.85,1.09,0.75));+#15505=ORIENTED_EDGE('',*,*,#15506,.T.);+#15506=EDGE_CURVE('',#15501,#15507,#15509,.T.);+#15507=VERTEX_POINT('',#15508);+#15508=CARTESIAN_POINT('',(7.298480775301,1.09,0.667364817767));+#15509=CIRCLE('',#15510,0.1);+#15510=AXIS2_PLACEMENT_3D('',#15511,#422,#13051);+#15511=CARTESIAN_POINT('',(7.2,1.09,0.65));+#15512=ORIENTED_EDGE('',*,*,#15513,.T.);+#15513=EDGE_CURVE('',#15507,#15514,#15516,.T.);+#15514=VERTEX_POINT('',#15515);+#15515=CARTESIAN_POINT('',(7.382385590716,1.09,0.165270364467));+#15516=LINE('',#15508,#13057);+#15517=ORIENTED_EDGE('',*,*,#15518,.T.);+#15518=EDGE_CURVE('',#15514,#15519,#15521,.T.);+#15519=VERTEX_POINT('',#15520);+#15520=CARTESIAN_POINT('',(7.579347141319,1.09,1.387778780781E-16));+#15521=CIRCLE('',#15522,0.2);+#15522=AXIS2_PLACEMENT_3D('',#15523,#1569,#13066);+#15523=CARTESIAN_POINT('',(7.579347141319,1.09,0.2));+#15524=ORIENTED_EDGE('',*,*,#15525,.T.);+#15525=EDGE_CURVE('',#15519,#15526,#15528,.T.);+#15526=VERTEX_POINT('',#15527);+#15527=CARTESIAN_POINT('',(8.,1.09,1.387778780781E-16));+#15528=LINE('',#15520,#49);+#15529=ORIENTED_EDGE('',*,*,#15530,.T.);+#15530=EDGE_CURVE('',#15526,#15531,#15533,.T.);+#15531=VERTEX_POINT('',#15532);+#15532=CARTESIAN_POINT('',(8.,1.09,0.1));+#15533=LINE('',#15527,#2043);+#15534=ORIENTED_EDGE('',*,*,#15535,.T.);+#15535=EDGE_CURVE('',#15531,#15536,#15538,.T.);+#15536=VERTEX_POINT('',#15537);+#15537=CARTESIAN_POINT('',(7.579347141319,1.09,0.1));+#15538=LINE('',#15532,#1576);+#15539=ORIENTED_EDGE('',*,*,#15540,.T.);+#15540=EDGE_CURVE('',#15536,#15541,#15543,.T.);+#15541=VERTEX_POINT('',#15542);+#15542=CARTESIAN_POINT('',(7.480866366018,1.09,0.182635182233));+#15543=CIRCLE('',#15544,1.E-01);+#15544=AXIS2_PLACEMENT_3D('',#15523,#422,#13088);+#15545=ORIENTED_EDGE('',*,*,#15546,.T.);+#15546=EDGE_CURVE('',#15541,#15547,#15549,.T.);+#15547=VERTEX_POINT('',#15548);+#15548=CARTESIAN_POINT('',(7.396961550602,1.09,0.684729635533));+#15549=LINE('',#15542,#13094);+#15550=ORIENTED_EDGE('',*,*,#15551,.T.);+#15551=EDGE_CURVE('',#15547,#7787,#15552,.T.);+#15552=CIRCLE('',#15553,0.2);+#15553=AXIS2_PLACEMENT_3D('',#15511,#1569,#13100);+#15554=ORIENTED_EDGE('',*,*,#7786,.T.);+#15555=PLANE('',#15556);+#15556=AXIS2_PLACEMENT_3D('',#15557,#1569,#13);+#15557=CARTESIAN_POINT('',(7.414276639233,1.09,0.410238158856));+#15558=ADVANCED_FACE('',(#15559),#15620,.T.);+#15559=FACE_BOUND('',#15560,.T.);+#15560=EDGE_LOOP('',(#15561,#15565,#15571,#15578,#15583,#15590,#15595,#15600,#15605,#15611,#15616,#7793));+#15561=ORIENTED_EDGE('',*,*,#15562,.F.);+#15562=EDGE_CURVE('',#13343,#7795,#15563,.T.);+#15563=LINE('',#15564,#2043);+#15564=CARTESIAN_POINT('',(7.,0.91,0.630119079428));+#15565=ORIENTED_EDGE('',*,*,#15566,.T.);+#15566=EDGE_CURVE('',#13343,#15567,#15569,.T.);+#15567=VERTEX_POINT('',#15568);+#15568=CARTESIAN_POINT('',(7.2,0.91,0.75));+#15569=LINE('',#15570,#49);+#15570=CARTESIAN_POINT('',(6.85,0.91,0.75));+#15571=ORIENTED_EDGE('',*,*,#15572,.T.);+#15572=EDGE_CURVE('',#15567,#15573,#15575,.T.);+#15573=VERTEX_POINT('',#15574);+#15574=CARTESIAN_POINT('',(7.298480775301,0.91,0.667364817767));+#15575=CIRCLE('',#15576,0.1);+#15576=AXIS2_PLACEMENT_3D('',#15577,#422,#13051);+#15577=CARTESIAN_POINT('',(7.2,0.91,0.65));+#15578=ORIENTED_EDGE('',*,*,#15579,.T.);+#15579=EDGE_CURVE('',#15573,#15580,#15582,.T.);+#15580=VERTEX_POINT('',#15581);+#15581=CARTESIAN_POINT('',(7.382385590716,0.91,0.165270364467));+#15582=LINE('',#15574,#13057);+#15583=ORIENTED_EDGE('',*,*,#15584,.T.);+#15584=EDGE_CURVE('',#15580,#15585,#15587,.T.);+#15585=VERTEX_POINT('',#15586);+#15586=CARTESIAN_POINT('',(7.579347141319,0.91,1.387778780781E-16));+#15587=CIRCLE('',#15588,0.2);+#15588=AXIS2_PLACEMENT_3D('',#15589,#1569,#13066);+#15589=CARTESIAN_POINT('',(7.579347141319,0.91,0.2));+#15590=ORIENTED_EDGE('',*,*,#15591,.T.);+#15591=EDGE_CURVE('',#15585,#15592,#15594,.T.);+#15592=VERTEX_POINT('',#15593);+#15593=CARTESIAN_POINT('',(8.,0.91,1.387778780781E-16));+#15594=LINE('',#15586,#49);+#15595=ORIENTED_EDGE('',*,*,#15596,.T.);+#15596=EDGE_CURVE('',#15592,#15597,#15599,.T.);+#15597=VERTEX_POINT('',#15598);+#15598=CARTESIAN_POINT('',(8.,0.91,0.1));+#15599=LINE('',#15593,#2043);+#15600=ORIENTED_EDGE('',*,*,#15601,.T.);+#15601=EDGE_CURVE('',#15597,#15602,#15604,.T.);+#15602=VERTEX_POINT('',#15603);+#15603=CARTESIAN_POINT('',(7.579347141319,0.91,0.1));+#15604=LINE('',#15598,#1576);+#15605=ORIENTED_EDGE('',*,*,#15606,.T.);+#15606=EDGE_CURVE('',#15602,#15607,#15609,.T.);+#15607=VERTEX_POINT('',#15608);+#15608=CARTESIAN_POINT('',(7.480866366018,0.91,0.182635182233));+#15609=CIRCLE('',#15610,1.E-01);+#15610=AXIS2_PLACEMENT_3D('',#15589,#422,#13088);+#15611=ORIENTED_EDGE('',*,*,#15612,.T.);+#15612=EDGE_CURVE('',#15607,#15613,#15615,.T.);+#15613=VERTEX_POINT('',#15614);+#15614=CARTESIAN_POINT('',(7.396961550602,0.91,0.684729635533));+#15615=LINE('',#15608,#13094);+#15616=ORIENTED_EDGE('',*,*,#15617,.T.);+#15617=EDGE_CURVE('',#15613,#7790,#15618,.T.);+#15618=CIRCLE('',#15619,0.2);+#15619=AXIS2_PLACEMENT_3D('',#15577,#1569,#13100);+#15620=PLANE('',#15621);+#15621=AXIS2_PLACEMENT_3D('',#15622,#1569,#13);+#15622=CARTESIAN_POINT('',(7.414276639233,0.91,0.410238158856));+#15623=ADVANCED_FACE('',(#15624),#15631,.T.);+#15624=FACE_BOUND('',#15625,.F.);+#15625=EDGE_LOOP('',(#15626,#15616,#15629,#15630));+#15626=ORIENTED_EDGE('',*,*,#15627,.T.);+#15627=EDGE_CURVE('',#15547,#15613,#15628,.T.);+#15628=LINE('',#15548,#1568);+#15629=ORIENTED_EDGE('',*,*,#7789,.F.);+#15630=ORIENTED_EDGE('',*,*,#15551,.F.);+#15631=CYLINDRICAL_SURFACE('',#15632,0.2);+#15632=AXIS2_PLACEMENT_3D('',#15511,#422,#13100);+#15633=ADVANCED_FACE('',(#15634),#7271,.F.);+#15634=FACE_BOUND('',#15635,.F.);+#15635=EDGE_LOOP('',(#15561,#15636,#15637,#15641));+#15636=ORIENTED_EDGE('',*,*,#13342,.T.);+#15637=ORIENTED_EDGE('',*,*,#15638,.T.);+#15638=EDGE_CURVE('',#13339,#7810,#15639,.T.);+#15639=LINE('',#15640,#2043);+#15640=CARTESIAN_POINT('',(7.,0.69,0.630119079428));+#15641=ORIENTED_EDGE('',*,*,#7809,.F.);+#15642=ADVANCED_FACE('',(#15643),#15702,.F.);+#15643=FACE_BOUND('',#15644,.F.);+#15644=EDGE_LOOP('',(#15645,#15646,#15652,#15659,#15664,#15671,#15676,#15681,#15686,#15692,#15697,#15701));+#15645=ORIENTED_EDGE('',*,*,#15638,.F.);+#15646=ORIENTED_EDGE('',*,*,#15647,.T.);+#15647=EDGE_CURVE('',#13339,#15648,#15650,.T.);+#15648=VERTEX_POINT('',#15649);+#15649=CARTESIAN_POINT('',(7.2,0.69,0.75));+#15650=LINE('',#15651,#49);+#15651=CARTESIAN_POINT('',(6.85,0.69,0.75));+#15652=ORIENTED_EDGE('',*,*,#15653,.T.);+#15653=EDGE_CURVE('',#15648,#15654,#15656,.T.);+#15654=VERTEX_POINT('',#15655);+#15655=CARTESIAN_POINT('',(7.298480775301,0.69,0.667364817767));+#15656=CIRCLE('',#15657,0.1);+#15657=AXIS2_PLACEMENT_3D('',#15658,#422,#13051);+#15658=CARTESIAN_POINT('',(7.2,0.69,0.65));+#15659=ORIENTED_EDGE('',*,*,#15660,.T.);+#15660=EDGE_CURVE('',#15654,#15661,#15663,.T.);+#15661=VERTEX_POINT('',#15662);+#15662=CARTESIAN_POINT('',(7.382385590716,0.69,0.165270364467));+#15663=LINE('',#15655,#13057);+#15664=ORIENTED_EDGE('',*,*,#15665,.T.);+#15665=EDGE_CURVE('',#15661,#15666,#15668,.T.);+#15666=VERTEX_POINT('',#15667);+#15667=CARTESIAN_POINT('',(7.579347141319,0.69,1.387778780781E-16));+#15668=CIRCLE('',#15669,0.2);+#15669=AXIS2_PLACEMENT_3D('',#15670,#1569,#13066);+#15670=CARTESIAN_POINT('',(7.579347141319,0.69,0.2));+#15671=ORIENTED_EDGE('',*,*,#15672,.T.);+#15672=EDGE_CURVE('',#15666,#15673,#15675,.T.);+#15673=VERTEX_POINT('',#15674);+#15674=CARTESIAN_POINT('',(8.,0.69,1.387778780781E-16));+#15675=LINE('',#15667,#49);+#15676=ORIENTED_EDGE('',*,*,#15677,.T.);+#15677=EDGE_CURVE('',#15673,#15678,#15680,.T.);+#15678=VERTEX_POINT('',#15679);+#15679=CARTESIAN_POINT('',(8.,0.69,0.1));+#15680=LINE('',#15674,#2043);+#15681=ORIENTED_EDGE('',*,*,#15682,.T.);+#15682=EDGE_CURVE('',#15678,#15683,#15685,.T.);+#15683=VERTEX_POINT('',#15684);+#15684=CARTESIAN_POINT('',(7.579347141319,0.69,0.1));+#15685=LINE('',#15679,#1576);+#15686=ORIENTED_EDGE('',*,*,#15687,.T.);+#15687=EDGE_CURVE('',#15683,#15688,#15690,.T.);+#15688=VERTEX_POINT('',#15689);+#15689=CARTESIAN_POINT('',(7.480866366018,0.69,0.182635182233));+#15690=CIRCLE('',#15691,1.E-01);+#15691=AXIS2_PLACEMENT_3D('',#15670,#422,#13088);+#15692=ORIENTED_EDGE('',*,*,#15693,.T.);+#15693=EDGE_CURVE('',#15688,#15694,#15696,.T.);+#15694=VERTEX_POINT('',#15695);+#15695=CARTESIAN_POINT('',(7.396961550602,0.69,0.684729635533));+#15696=LINE('',#15689,#13094);+#15697=ORIENTED_EDGE('',*,*,#15698,.T.);+#15698=EDGE_CURVE('',#15694,#7822,#15699,.T.);+#15699=CIRCLE('',#15700,0.2);+#15700=AXIS2_PLACEMENT_3D('',#15658,#1569,#13100);+#15701=ORIENTED_EDGE('',*,*,#7821,.T.);+#15702=PLANE('',#15703);+#15703=AXIS2_PLACEMENT_3D('',#15704,#1569,#13);+#15704=CARTESIAN_POINT('',(7.414276639233,0.69,0.410238158856));+#15705=ADVANCED_FACE('',(#15706),#15767,.T.);+#15706=FACE_BOUND('',#15707,.T.);+#15707=EDGE_LOOP('',(#15708,#15712,#15718,#15725,#15730,#15737,#15742,#15747,#15752,#15758,#15763,#7828));+#15708=ORIENTED_EDGE('',*,*,#15709,.F.);+#15709=EDGE_CURVE('',#13335,#7830,#15710,.T.);+#15710=LINE('',#15711,#2043);+#15711=CARTESIAN_POINT('',(7.,0.51,0.630119079428));+#15712=ORIENTED_EDGE('',*,*,#15713,.T.);+#15713=EDGE_CURVE('',#13335,#15714,#15716,.T.);+#15714=VERTEX_POINT('',#15715);+#15715=CARTESIAN_POINT('',(7.2,0.51,0.75));+#15716=LINE('',#15717,#49);+#15717=CARTESIAN_POINT('',(6.85,0.51,0.75));+#15718=ORIENTED_EDGE('',*,*,#15719,.T.);+#15719=EDGE_CURVE('',#15714,#15720,#15722,.T.);+#15720=VERTEX_POINT('',#15721);+#15721=CARTESIAN_POINT('',(7.298480775301,0.51,0.667364817767));+#15722=CIRCLE('',#15723,0.1);+#15723=AXIS2_PLACEMENT_3D('',#15724,#422,#13051);+#15724=CARTESIAN_POINT('',(7.2,0.51,0.65));+#15725=ORIENTED_EDGE('',*,*,#15726,.T.);+#15726=EDGE_CURVE('',#15720,#15727,#15729,.T.);+#15727=VERTEX_POINT('',#15728);+#15728=CARTESIAN_POINT('',(7.382385590716,0.51,0.165270364467));+#15729=LINE('',#15721,#13057);+#15730=ORIENTED_EDGE('',*,*,#15731,.T.);+#15731=EDGE_CURVE('',#15727,#15732,#15734,.T.);+#15732=VERTEX_POINT('',#15733);+#15733=CARTESIAN_POINT('',(7.579347141319,0.51,1.387778780781E-16));+#15734=CIRCLE('',#15735,0.2);+#15735=AXIS2_PLACEMENT_3D('',#15736,#1569,#13066);+#15736=CARTESIAN_POINT('',(7.579347141319,0.51,0.2));+#15737=ORIENTED_EDGE('',*,*,#15738,.T.);+#15738=EDGE_CURVE('',#15732,#15739,#15741,.T.);+#15739=VERTEX_POINT('',#15740);+#15740=CARTESIAN_POINT('',(8.,0.51,1.387778780781E-16));+#15741=LINE('',#15733,#49);+#15742=ORIENTED_EDGE('',*,*,#15743,.T.);+#15743=EDGE_CURVE('',#15739,#15744,#15746,.T.);+#15744=VERTEX_POINT('',#15745);+#15745=CARTESIAN_POINT('',(8.,0.51,0.1));+#15746=LINE('',#15740,#2043);+#15747=ORIENTED_EDGE('',*,*,#15748,.T.);+#15748=EDGE_CURVE('',#15744,#15749,#15751,.T.);+#15749=VERTEX_POINT('',#15750);+#15750=CARTESIAN_POINT('',(7.579347141319,0.51,0.1));+#15751=LINE('',#15745,#1576);+#15752=ORIENTED_EDGE('',*,*,#15753,.T.);+#15753=EDGE_CURVE('',#15749,#15754,#15756,.T.);+#15754=VERTEX_POINT('',#15755);+#15755=CARTESIAN_POINT('',(7.480866366018,0.51,0.182635182233));+#15756=CIRCLE('',#15757,1.E-01);+#15757=AXIS2_PLACEMENT_3D('',#15736,#422,#13088);+#15758=ORIENTED_EDGE('',*,*,#15759,.T.);+#15759=EDGE_CURVE('',#15754,#15760,#15762,.T.);+#15760=VERTEX_POINT('',#15761);+#15761=CARTESIAN_POINT('',(7.396961550602,0.51,0.684729635533));+#15762=LINE('',#15755,#13094);+#15763=ORIENTED_EDGE('',*,*,#15764,.T.);+#15764=EDGE_CURVE('',#15760,#7825,#15765,.T.);+#15765=CIRCLE('',#15766,0.2);+#15766=AXIS2_PLACEMENT_3D('',#15724,#1569,#13100);+#15767=PLANE('',#15768);+#15768=AXIS2_PLACEMENT_3D('',#15769,#1569,#13);+#15769=CARTESIAN_POINT('',(7.414276639233,0.51,0.410238158856));+#15770=ADVANCED_FACE('',(#15771),#15778,.T.);+#15771=FACE_BOUND('',#15772,.F.);+#15772=EDGE_LOOP('',(#15773,#15763,#15776,#15777));+#15773=ORIENTED_EDGE('',*,*,#15774,.T.);+#15774=EDGE_CURVE('',#15694,#15760,#15775,.T.);+#15775=LINE('',#15695,#1568);+#15776=ORIENTED_EDGE('',*,*,#7824,.F.);+#15777=ORIENTED_EDGE('',*,*,#15698,.F.);+#15778=CYLINDRICAL_SURFACE('',#15779,0.2);+#15779=AXIS2_PLACEMENT_3D('',#15658,#422,#13100);+#15780=ADVANCED_FACE('',(#15781),#7271,.F.);+#15781=FACE_BOUND('',#15782,.F.);+#15782=EDGE_LOOP('',(#15708,#15783,#15784,#15788));+#15783=ORIENTED_EDGE('',*,*,#13334,.T.);+#15784=ORIENTED_EDGE('',*,*,#15785,.T.);+#15785=EDGE_CURVE('',#13331,#7845,#15786,.T.);+#15786=LINE('',#15787,#2043);+#15787=CARTESIAN_POINT('',(7.,0.29,0.630119079428));+#15788=ORIENTED_EDGE('',*,*,#7844,.F.);+#15789=ADVANCED_FACE('',(#15790),#15849,.F.);+#15790=FACE_BOUND('',#15791,.F.);+#15791=EDGE_LOOP('',(#15792,#15793,#15799,#15806,#15811,#15818,#15823,#15828,#15833,#15839,#15844,#15848));+#15792=ORIENTED_EDGE('',*,*,#15785,.F.);+#15793=ORIENTED_EDGE('',*,*,#15794,.T.);+#15794=EDGE_CURVE('',#13331,#15795,#15797,.T.);+#15795=VERTEX_POINT('',#15796);+#15796=CARTESIAN_POINT('',(7.2,0.29,0.75));+#15797=LINE('',#15798,#49);+#15798=CARTESIAN_POINT('',(6.85,0.29,0.75));+#15799=ORIENTED_EDGE('',*,*,#15800,.T.);+#15800=EDGE_CURVE('',#15795,#15801,#15803,.T.);+#15801=VERTEX_POINT('',#15802);+#15802=CARTESIAN_POINT('',(7.298480775301,0.29,0.667364817767));+#15803=CIRCLE('',#15804,0.1);+#15804=AXIS2_PLACEMENT_3D('',#15805,#422,#13051);+#15805=CARTESIAN_POINT('',(7.2,0.29,0.65));+#15806=ORIENTED_EDGE('',*,*,#15807,.T.);+#15807=EDGE_CURVE('',#15801,#15808,#15810,.T.);+#15808=VERTEX_POINT('',#15809);+#15809=CARTESIAN_POINT('',(7.382385590716,0.29,0.165270364467));+#15810=LINE('',#15802,#13057);+#15811=ORIENTED_EDGE('',*,*,#15812,.T.);+#15812=EDGE_CURVE('',#15808,#15813,#15815,.T.);+#15813=VERTEX_POINT('',#15814);+#15814=CARTESIAN_POINT('',(7.579347141319,0.29,1.387778780781E-16));+#15815=CIRCLE('',#15816,0.2);+#15816=AXIS2_PLACEMENT_3D('',#15817,#1569,#13066);+#15817=CARTESIAN_POINT('',(7.579347141319,0.29,0.2));+#15818=ORIENTED_EDGE('',*,*,#15819,.T.);+#15819=EDGE_CURVE('',#15813,#15820,#15822,.T.);+#15820=VERTEX_POINT('',#15821);+#15821=CARTESIAN_POINT('',(8.,0.29,1.387778780781E-16));+#15822=LINE('',#15814,#49);+#15823=ORIENTED_EDGE('',*,*,#15824,.T.);+#15824=EDGE_CURVE('',#15820,#15825,#15827,.T.);+#15825=VERTEX_POINT('',#15826);+#15826=CARTESIAN_POINT('',(8.,0.29,0.1));+#15827=LINE('',#15821,#2043);+#15828=ORIENTED_EDGE('',*,*,#15829,.T.);+#15829=EDGE_CURVE('',#15825,#15830,#15832,.T.);+#15830=VERTEX_POINT('',#15831);+#15831=CARTESIAN_POINT('',(7.579347141319,0.29,0.1));+#15832=LINE('',#15826,#1576);+#15833=ORIENTED_EDGE('',*,*,#15834,.T.);+#15834=EDGE_CURVE('',#15830,#15835,#15837,.T.);+#15835=VERTEX_POINT('',#15836);+#15836=CARTESIAN_POINT('',(7.480866366018,0.29,0.182635182233));+#15837=CIRCLE('',#15838,1.E-01);+#15838=AXIS2_PLACEMENT_3D('',#15817,#422,#13088);+#15839=ORIENTED_EDGE('',*,*,#15840,.T.);+#15840=EDGE_CURVE('',#15835,#15841,#15843,.T.);+#15841=VERTEX_POINT('',#15842);+#15842=CARTESIAN_POINT('',(7.396961550602,0.29,0.684729635533));+#15843=LINE('',#15836,#13094);+#15844=ORIENTED_EDGE('',*,*,#15845,.T.);+#15845=EDGE_CURVE('',#15841,#7857,#15846,.T.);+#15846=CIRCLE('',#15847,0.2);+#15847=AXIS2_PLACEMENT_3D('',#15805,#1569,#13100);+#15848=ORIENTED_EDGE('',*,*,#7856,.T.);+#15849=PLANE('',#15850);+#15850=AXIS2_PLACEMENT_3D('',#15851,#1569,#13);+#15851=CARTESIAN_POINT('',(7.414276639233,0.29,0.410238158856));+#15852=ADVANCED_FACE('',(#15853),#15914,.T.);+#15853=FACE_BOUND('',#15854,.T.);+#15854=EDGE_LOOP('',(#15855,#15859,#15865,#15872,#15877,#15884,#15889,#15894,#15899,#15905,#15910,#7863));+#15855=ORIENTED_EDGE('',*,*,#15856,.F.);+#15856=EDGE_CURVE('',#13327,#7865,#15857,.T.);+#15857=LINE('',#15858,#2043);+#15858=CARTESIAN_POINT('',(7.,0.11,0.630119079428));+#15859=ORIENTED_EDGE('',*,*,#15860,.T.);+#15860=EDGE_CURVE('',#13327,#15861,#15863,.T.);+#15861=VERTEX_POINT('',#15862);+#15862=CARTESIAN_POINT('',(7.2,0.11,0.75));+#15863=LINE('',#15864,#49);+#15864=CARTESIAN_POINT('',(6.85,0.11,0.75));+#15865=ORIENTED_EDGE('',*,*,#15866,.T.);+#15866=EDGE_CURVE('',#15861,#15867,#15869,.T.);+#15867=VERTEX_POINT('',#15868);+#15868=CARTESIAN_POINT('',(7.298480775301,0.11,0.667364817767));+#15869=CIRCLE('',#15870,0.1);+#15870=AXIS2_PLACEMENT_3D('',#15871,#422,#13051);+#15871=CARTESIAN_POINT('',(7.2,0.11,0.65));+#15872=ORIENTED_EDGE('',*,*,#15873,.T.);+#15873=EDGE_CURVE('',#15867,#15874,#15876,.T.);+#15874=VERTEX_POINT('',#15875);+#15875=CARTESIAN_POINT('',(7.382385590716,0.11,0.165270364467));+#15876=LINE('',#15868,#13057);+#15877=ORIENTED_EDGE('',*,*,#15878,.T.);+#15878=EDGE_CURVE('',#15874,#15879,#15881,.T.);+#15879=VERTEX_POINT('',#15880);+#15880=CARTESIAN_POINT('',(7.579347141319,0.11,1.387778780781E-16));+#15881=CIRCLE('',#15882,0.2);+#15882=AXIS2_PLACEMENT_3D('',#15883,#1569,#13066);+#15883=CARTESIAN_POINT('',(7.579347141319,0.11,0.2));+#15884=ORIENTED_EDGE('',*,*,#15885,.T.);+#15885=EDGE_CURVE('',#15879,#15886,#15888,.T.);+#15886=VERTEX_POINT('',#15887);+#15887=CARTESIAN_POINT('',(8.,0.11,1.387778780781E-16));+#15888=LINE('',#15880,#49);+#15889=ORIENTED_EDGE('',*,*,#15890,.T.);+#15890=EDGE_CURVE('',#15886,#15891,#15893,.T.);+#15891=VERTEX_POINT('',#15892);+#15892=CARTESIAN_POINT('',(8.,0.11,0.1));+#15893=LINE('',#15887,#2043);+#15894=ORIENTED_EDGE('',*,*,#15895,.T.);+#15895=EDGE_CURVE('',#15891,#15896,#15898,.T.);+#15896=VERTEX_POINT('',#15897);+#15897=CARTESIAN_POINT('',(7.579347141319,0.11,0.1));+#15898=LINE('',#15892,#1576);+#15899=ORIENTED_EDGE('',*,*,#15900,.T.);+#15900=EDGE_CURVE('',#15896,#15901,#15903,.T.);+#15901=VERTEX_POINT('',#15902);+#15902=CARTESIAN_POINT('',(7.480866366018,0.11,0.182635182233));+#15903=CIRCLE('',#15904,1.E-01);+#15904=AXIS2_PLACEMENT_3D('',#15883,#422,#13088);+#15905=ORIENTED_EDGE('',*,*,#15906,.T.);+#15906=EDGE_CURVE('',#15901,#15907,#15909,.T.);+#15907=VERTEX_POINT('',#15908);+#15908=CARTESIAN_POINT('',(7.396961550602,0.11,0.684729635533));+#15909=LINE('',#15902,#13094);+#15910=ORIENTED_EDGE('',*,*,#15911,.T.);+#15911=EDGE_CURVE('',#15907,#7860,#15912,.T.);+#15912=CIRCLE('',#15913,0.2);+#15913=AXIS2_PLACEMENT_3D('',#15871,#1569,#13100);+#15914=PLANE('',#15915);+#15915=AXIS2_PLACEMENT_3D('',#15916,#1569,#13);+#15916=CARTESIAN_POINT('',(7.414276639233,0.11,0.410238158856));+#15917=ADVANCED_FACE('',(#15918),#15925,.T.);+#15918=FACE_BOUND('',#15919,.F.);+#15919=EDGE_LOOP('',(#15920,#15910,#15923,#15924));+#15920=ORIENTED_EDGE('',*,*,#15921,.T.);+#15921=EDGE_CURVE('',#15841,#15907,#15922,.T.);+#15922=LINE('',#15842,#1568);+#15923=ORIENTED_EDGE('',*,*,#7859,.F.);+#15924=ORIENTED_EDGE('',*,*,#15845,.F.);+#15925=CYLINDRICAL_SURFACE('',#15926,0.2);+#15926=AXIS2_PLACEMENT_3D('',#15805,#422,#13100);+#15927=ADVANCED_FACE('',(#15928),#7271,.F.);+#15928=FACE_BOUND('',#15929,.F.);+#15929=EDGE_LOOP('',(#15855,#15930,#15931,#15935));+#15930=ORIENTED_EDGE('',*,*,#13326,.T.);+#15931=ORIENTED_EDGE('',*,*,#15932,.T.);+#15932=EDGE_CURVE('',#13323,#7880,#15933,.T.);+#15933=LINE('',#15934,#2043);+#15934=CARTESIAN_POINT('',(7.,-0.11,0.630119079428));+#15935=ORIENTED_EDGE('',*,*,#7879,.F.);+#15936=ADVANCED_FACE('',(#15937),#15996,.F.);+#15937=FACE_BOUND('',#15938,.F.);+#15938=EDGE_LOOP('',(#15939,#15940,#15946,#15953,#15958,#15965,#15970,#15975,#15980,#15986,#15991,#15995));+#15939=ORIENTED_EDGE('',*,*,#15932,.F.);+#15940=ORIENTED_EDGE('',*,*,#15941,.T.);+#15941=EDGE_CURVE('',#13323,#15942,#15944,.T.);+#15942=VERTEX_POINT('',#15943);+#15943=CARTESIAN_POINT('',(7.2,-0.11,0.75));+#15944=LINE('',#15945,#49);+#15945=CARTESIAN_POINT('',(6.85,-0.11,0.75));+#15946=ORIENTED_EDGE('',*,*,#15947,.T.);+#15947=EDGE_CURVE('',#15942,#15948,#15950,.T.);+#15948=VERTEX_POINT('',#15949);+#15949=CARTESIAN_POINT('',(7.298480775301,-0.11,0.667364817767));+#15950=CIRCLE('',#15951,0.1);+#15951=AXIS2_PLACEMENT_3D('',#15952,#422,#13051);+#15952=CARTESIAN_POINT('',(7.2,-0.11,0.65));+#15953=ORIENTED_EDGE('',*,*,#15954,.T.);+#15954=EDGE_CURVE('',#15948,#15955,#15957,.T.);+#15955=VERTEX_POINT('',#15956);+#15956=CARTESIAN_POINT('',(7.382385590716,-0.11,0.165270364467));+#15957=LINE('',#15949,#13057);+#15958=ORIENTED_EDGE('',*,*,#15959,.T.);+#15959=EDGE_CURVE('',#15955,#15960,#15962,.T.);+#15960=VERTEX_POINT('',#15961);+#15961=CARTESIAN_POINT('',(7.579347141319,-0.11,1.387778780781E-16));+#15962=CIRCLE('',#15963,0.2);+#15963=AXIS2_PLACEMENT_3D('',#15964,#1569,#13066);+#15964=CARTESIAN_POINT('',(7.579347141319,-0.11,0.2));+#15965=ORIENTED_EDGE('',*,*,#15966,.T.);+#15966=EDGE_CURVE('',#15960,#15967,#15969,.T.);+#15967=VERTEX_POINT('',#15968);+#15968=CARTESIAN_POINT('',(8.,-0.11,1.387778780781E-16));+#15969=LINE('',#15961,#49);+#15970=ORIENTED_EDGE('',*,*,#15971,.T.);+#15971=EDGE_CURVE('',#15967,#15972,#15974,.T.);+#15972=VERTEX_POINT('',#15973);+#15973=CARTESIAN_POINT('',(8.,-0.11,0.1));+#15974=LINE('',#15968,#2043);+#15975=ORIENTED_EDGE('',*,*,#15976,.T.);+#15976=EDGE_CURVE('',#15972,#15977,#15979,.T.);+#15977=VERTEX_POINT('',#15978);+#15978=CARTESIAN_POINT('',(7.579347141319,-0.11,0.1));+#15979=LINE('',#15973,#1576);+#15980=ORIENTED_EDGE('',*,*,#15981,.T.);+#15981=EDGE_CURVE('',#15977,#15982,#15984,.T.);+#15982=VERTEX_POINT('',#15983);+#15983=CARTESIAN_POINT('',(7.480866366018,-0.11,0.182635182233));+#15984=CIRCLE('',#15985,1.E-01);+#15985=AXIS2_PLACEMENT_3D('',#15964,#422,#13088);+#15986=ORIENTED_EDGE('',*,*,#15987,.T.);+#15987=EDGE_CURVE('',#15982,#15988,#15990,.T.);+#15988=VERTEX_POINT('',#15989);+#15989=CARTESIAN_POINT('',(7.396961550602,-0.11,0.684729635533));+#15990=LINE('',#15983,#13094);+#15991=ORIENTED_EDGE('',*,*,#15992,.T.);+#15992=EDGE_CURVE('',#15988,#7892,#15993,.T.);+#15993=CIRCLE('',#15994,0.2);+#15994=AXIS2_PLACEMENT_3D('',#15952,#1569,#13100);+#15995=ORIENTED_EDGE('',*,*,#7891,.T.);+#15996=PLANE('',#15997);+#15997=AXIS2_PLACEMENT_3D('',#15998,#1569,#13);+#15998=CARTESIAN_POINT('',(7.414276639233,-0.11,0.410238158856));+#15999=ADVANCED_FACE('',(#16000),#16061,.T.);+#16000=FACE_BOUND('',#16001,.T.);+#16001=EDGE_LOOP('',(#16002,#16006,#16012,#16019,#16024,#16031,#16036,#16041,#16046,#16052,#16057,#7898));+#16002=ORIENTED_EDGE('',*,*,#16003,.F.);+#16003=EDGE_CURVE('',#13319,#7900,#16004,.T.);+#16004=LINE('',#16005,#2043);+#16005=CARTESIAN_POINT('',(7.,-0.29,0.630119079428));+#16006=ORIENTED_EDGE('',*,*,#16007,.T.);+#16007=EDGE_CURVE('',#13319,#16008,#16010,.T.);+#16008=VERTEX_POINT('',#16009);+#16009=CARTESIAN_POINT('',(7.2,-0.29,0.75));+#16010=LINE('',#16011,#49);+#16011=CARTESIAN_POINT('',(6.85,-0.29,0.75));+#16012=ORIENTED_EDGE('',*,*,#16013,.T.);+#16013=EDGE_CURVE('',#16008,#16014,#16016,.T.);+#16014=VERTEX_POINT('',#16015);+#16015=CARTESIAN_POINT('',(7.298480775301,-0.29,0.667364817767));+#16016=CIRCLE('',#16017,0.1);+#16017=AXIS2_PLACEMENT_3D('',#16018,#422,#13051);+#16018=CARTESIAN_POINT('',(7.2,-0.29,0.65));+#16019=ORIENTED_EDGE('',*,*,#16020,.T.);+#16020=EDGE_CURVE('',#16014,#16021,#16023,.T.);+#16021=VERTEX_POINT('',#16022);+#16022=CARTESIAN_POINT('',(7.382385590716,-0.29,0.165270364467));+#16023=LINE('',#16015,#13057);+#16024=ORIENTED_EDGE('',*,*,#16025,.T.);+#16025=EDGE_CURVE('',#16021,#16026,#16028,.T.);+#16026=VERTEX_POINT('',#16027);+#16027=CARTESIAN_POINT('',(7.579347141319,-0.29,1.387778780781E-16));+#16028=CIRCLE('',#16029,0.2);+#16029=AXIS2_PLACEMENT_3D('',#16030,#1569,#13066);+#16030=CARTESIAN_POINT('',(7.579347141319,-0.29,0.2));+#16031=ORIENTED_EDGE('',*,*,#16032,.T.);+#16032=EDGE_CURVE('',#16026,#16033,#16035,.T.);+#16033=VERTEX_POINT('',#16034);+#16034=CARTESIAN_POINT('',(8.,-0.29,1.387778780781E-16));+#16035=LINE('',#16027,#49);+#16036=ORIENTED_EDGE('',*,*,#16037,.T.);+#16037=EDGE_CURVE('',#16033,#16038,#16040,.T.);+#16038=VERTEX_POINT('',#16039);+#16039=CARTESIAN_POINT('',(8.,-0.29,0.1));+#16040=LINE('',#16034,#2043);+#16041=ORIENTED_EDGE('',*,*,#16042,.T.);+#16042=EDGE_CURVE('',#16038,#16043,#16045,.T.);+#16043=VERTEX_POINT('',#16044);+#16044=CARTESIAN_POINT('',(7.579347141319,-0.29,0.1));+#16045=LINE('',#16039,#1576);+#16046=ORIENTED_EDGE('',*,*,#16047,.T.);+#16047=EDGE_CURVE('',#16043,#16048,#16050,.T.);+#16048=VERTEX_POINT('',#16049);+#16049=CARTESIAN_POINT('',(7.480866366018,-0.29,0.182635182233));+#16050=CIRCLE('',#16051,1.E-01);+#16051=AXIS2_PLACEMENT_3D('',#16030,#422,#13088);+#16052=ORIENTED_EDGE('',*,*,#16053,.T.);+#16053=EDGE_CURVE('',#16048,#16054,#16056,.T.);+#16054=VERTEX_POINT('',#16055);+#16055=CARTESIAN_POINT('',(7.396961550602,-0.29,0.684729635533));+#16056=LINE('',#16049,#13094);+#16057=ORIENTED_EDGE('',*,*,#16058,.T.);+#16058=EDGE_CURVE('',#16054,#7895,#16059,.T.);+#16059=CIRCLE('',#16060,0.2);+#16060=AXIS2_PLACEMENT_3D('',#16018,#1569,#13100);+#16061=PLANE('',#16062);+#16062=AXIS2_PLACEMENT_3D('',#16063,#1569,#13);+#16063=CARTESIAN_POINT('',(7.414276639233,-0.29,0.410238158856));+#16064=ADVANCED_FACE('',(#16065),#16072,.T.);+#16065=FACE_BOUND('',#16066,.F.);+#16066=EDGE_LOOP('',(#16067,#16057,#16070,#16071));+#16067=ORIENTED_EDGE('',*,*,#16068,.T.);+#16068=EDGE_CURVE('',#15988,#16054,#16069,.T.);+#16069=LINE('',#15989,#1568);+#16070=ORIENTED_EDGE('',*,*,#7894,.F.);+#16071=ORIENTED_EDGE('',*,*,#15992,.F.);+#16072=CYLINDRICAL_SURFACE('',#16073,0.2);+#16073=AXIS2_PLACEMENT_3D('',#15952,#422,#13100);+#16074=ADVANCED_FACE('',(#16075),#7271,.F.);+#16075=FACE_BOUND('',#16076,.F.);+#16076=EDGE_LOOP('',(#16002,#16077,#16078,#16082));+#16077=ORIENTED_EDGE('',*,*,#13318,.T.);+#16078=ORIENTED_EDGE('',*,*,#16079,.T.);+#16079=EDGE_CURVE('',#13315,#7915,#16080,.T.);+#16080=LINE('',#16081,#2043);+#16081=CARTESIAN_POINT('',(7.,-0.51,0.630119079428));+#16082=ORIENTED_EDGE('',*,*,#7914,.F.);+#16083=ADVANCED_FACE('',(#16084),#16143,.F.);+#16084=FACE_BOUND('',#16085,.F.);+#16085=EDGE_LOOP('',(#16086,#16087,#16093,#16100,#16105,#16112,#16117,#16122,#16127,#16133,#16138,#16142));+#16086=ORIENTED_EDGE('',*,*,#16079,.F.);+#16087=ORIENTED_EDGE('',*,*,#16088,.T.);+#16088=EDGE_CURVE('',#13315,#16089,#16091,.T.);+#16089=VERTEX_POINT('',#16090);+#16090=CARTESIAN_POINT('',(7.2,-0.51,0.75));+#16091=LINE('',#16092,#49);+#16092=CARTESIAN_POINT('',(6.85,-0.51,0.75));+#16093=ORIENTED_EDGE('',*,*,#16094,.T.);+#16094=EDGE_CURVE('',#16089,#16095,#16097,.T.);+#16095=VERTEX_POINT('',#16096);+#16096=CARTESIAN_POINT('',(7.298480775301,-0.51,0.667364817767));+#16097=CIRCLE('',#16098,0.1);+#16098=AXIS2_PLACEMENT_3D('',#16099,#422,#13051);+#16099=CARTESIAN_POINT('',(7.2,-0.51,0.65));+#16100=ORIENTED_EDGE('',*,*,#16101,.T.);+#16101=EDGE_CURVE('',#16095,#16102,#16104,.T.);+#16102=VERTEX_POINT('',#16103);+#16103=CARTESIAN_POINT('',(7.382385590716,-0.51,0.165270364467));+#16104=LINE('',#16096,#13057);+#16105=ORIENTED_EDGE('',*,*,#16106,.T.);+#16106=EDGE_CURVE('',#16102,#16107,#16109,.T.);+#16107=VERTEX_POINT('',#16108);+#16108=CARTESIAN_POINT('',(7.579347141319,-0.51,1.387778780781E-16));+#16109=CIRCLE('',#16110,0.2);+#16110=AXIS2_PLACEMENT_3D('',#16111,#1569,#13066);+#16111=CARTESIAN_POINT('',(7.579347141319,-0.51,0.2));+#16112=ORIENTED_EDGE('',*,*,#16113,.T.);+#16113=EDGE_CURVE('',#16107,#16114,#16116,.T.);+#16114=VERTEX_POINT('',#16115);+#16115=CARTESIAN_POINT('',(8.,-0.51,1.387778780781E-16));+#16116=LINE('',#16108,#49);+#16117=ORIENTED_EDGE('',*,*,#16118,.T.);+#16118=EDGE_CURVE('',#16114,#16119,#16121,.T.);+#16119=VERTEX_POINT('',#16120);+#16120=CARTESIAN_POINT('',(8.,-0.51,0.1));+#16121=LINE('',#16115,#2043);+#16122=ORIENTED_EDGE('',*,*,#16123,.T.);+#16123=EDGE_CURVE('',#16119,#16124,#16126,.T.);+#16124=VERTEX_POINT('',#16125);+#16125=CARTESIAN_POINT('',(7.579347141319,-0.51,0.1));+#16126=LINE('',#16120,#1576);+#16127=ORIENTED_EDGE('',*,*,#16128,.T.);+#16128=EDGE_CURVE('',#16124,#16129,#16131,.T.);+#16129=VERTEX_POINT('',#16130);+#16130=CARTESIAN_POINT('',(7.480866366018,-0.51,0.182635182233));+#16131=CIRCLE('',#16132,1.E-01);+#16132=AXIS2_PLACEMENT_3D('',#16111,#422,#13088);+#16133=ORIENTED_EDGE('',*,*,#16134,.T.);+#16134=EDGE_CURVE('',#16129,#16135,#16137,.T.);+#16135=VERTEX_POINT('',#16136);+#16136=CARTESIAN_POINT('',(7.396961550602,-0.51,0.684729635533));+#16137=LINE('',#16130,#13094);+#16138=ORIENTED_EDGE('',*,*,#16139,.T.);+#16139=EDGE_CURVE('',#16135,#7927,#16140,.T.);+#16140=CIRCLE('',#16141,0.2);+#16141=AXIS2_PLACEMENT_3D('',#16099,#1569,#13100);+#16142=ORIENTED_EDGE('',*,*,#7926,.T.);+#16143=PLANE('',#16144);+#16144=AXIS2_PLACEMENT_3D('',#16145,#1569,#13);+#16145=CARTESIAN_POINT('',(7.414276639233,-0.51,0.410238158856));+#16146=ADVANCED_FACE('',(#16147),#16208,.T.);+#16147=FACE_BOUND('',#16148,.T.);+#16148=EDGE_LOOP('',(#16149,#16153,#16159,#16166,#16171,#16178,#16183,#16188,#16193,#16199,#16204,#7933));+#16149=ORIENTED_EDGE('',*,*,#16150,.F.);+#16150=EDGE_CURVE('',#13311,#7935,#16151,.T.);+#16151=LINE('',#16152,#2043);+#16152=CARTESIAN_POINT('',(7.,-0.69,0.630119079428));+#16153=ORIENTED_EDGE('',*,*,#16154,.T.);+#16154=EDGE_CURVE('',#13311,#16155,#16157,.T.);+#16155=VERTEX_POINT('',#16156);+#16156=CARTESIAN_POINT('',(7.2,-0.69,0.75));+#16157=LINE('',#16158,#49);+#16158=CARTESIAN_POINT('',(6.85,-0.69,0.75));+#16159=ORIENTED_EDGE('',*,*,#16160,.T.);+#16160=EDGE_CURVE('',#16155,#16161,#16163,.T.);+#16161=VERTEX_POINT('',#16162);+#16162=CARTESIAN_POINT('',(7.298480775301,-0.69,0.667364817767));+#16163=CIRCLE('',#16164,0.1);+#16164=AXIS2_PLACEMENT_3D('',#16165,#422,#13051);+#16165=CARTESIAN_POINT('',(7.2,-0.69,0.65));+#16166=ORIENTED_EDGE('',*,*,#16167,.T.);+#16167=EDGE_CURVE('',#16161,#16168,#16170,.T.);+#16168=VERTEX_POINT('',#16169);+#16169=CARTESIAN_POINT('',(7.382385590716,-0.69,0.165270364467));+#16170=LINE('',#16162,#13057);+#16171=ORIENTED_EDGE('',*,*,#16172,.T.);+#16172=EDGE_CURVE('',#16168,#16173,#16175,.T.);+#16173=VERTEX_POINT('',#16174);+#16174=CARTESIAN_POINT('',(7.579347141319,-0.69,1.387778780781E-16));+#16175=CIRCLE('',#16176,0.2);+#16176=AXIS2_PLACEMENT_3D('',#16177,#1569,#13066);+#16177=CARTESIAN_POINT('',(7.579347141319,-0.69,0.2));+#16178=ORIENTED_EDGE('',*,*,#16179,.T.);+#16179=EDGE_CURVE('',#16173,#16180,#16182,.T.);+#16180=VERTEX_POINT('',#16181);+#16181=CARTESIAN_POINT('',(8.,-0.69,1.387778780781E-16));+#16182=LINE('',#16174,#49);+#16183=ORIENTED_EDGE('',*,*,#16184,.T.);+#16184=EDGE_CURVE('',#16180,#16185,#16187,.T.);+#16185=VERTEX_POINT('',#16186);+#16186=CARTESIAN_POINT('',(8.,-0.69,0.1));+#16187=LINE('',#16181,#2043);+#16188=ORIENTED_EDGE('',*,*,#16189,.T.);+#16189=EDGE_CURVE('',#16185,#16190,#16192,.T.);+#16190=VERTEX_POINT('',#16191);+#16191=CARTESIAN_POINT('',(7.579347141319,-0.69,0.1));+#16192=LINE('',#16186,#1576);+#16193=ORIENTED_EDGE('',*,*,#16194,.T.);+#16194=EDGE_CURVE('',#16190,#16195,#16197,.T.);+#16195=VERTEX_POINT('',#16196);+#16196=CARTESIAN_POINT('',(7.480866366018,-0.69,0.182635182233));+#16197=CIRCLE('',#16198,1.E-01);+#16198=AXIS2_PLACEMENT_3D('',#16177,#422,#13088);+#16199=ORIENTED_EDGE('',*,*,#16200,.T.);+#16200=EDGE_CURVE('',#16195,#16201,#16203,.T.);+#16201=VERTEX_POINT('',#16202);+#16202=CARTESIAN_POINT('',(7.396961550602,-0.69,0.684729635533));+#16203=LINE('',#16196,#13094);+#16204=ORIENTED_EDGE('',*,*,#16205,.T.);+#16205=EDGE_CURVE('',#16201,#7930,#16206,.T.);+#16206=CIRCLE('',#16207,0.2);+#16207=AXIS2_PLACEMENT_3D('',#16165,#1569,#13100);+#16208=PLANE('',#16209);+#16209=AXIS2_PLACEMENT_3D('',#16210,#1569,#13);+#16210=CARTESIAN_POINT('',(7.414276639233,-0.69,0.410238158856));+#16211=ADVANCED_FACE('',(#16212),#16219,.T.);+#16212=FACE_BOUND('',#16213,.F.);+#16213=EDGE_LOOP('',(#16214,#16204,#16217,#16218));+#16214=ORIENTED_EDGE('',*,*,#16215,.T.);+#16215=EDGE_CURVE('',#16135,#16201,#16216,.T.);+#16216=LINE('',#16136,#1568);+#16217=ORIENTED_EDGE('',*,*,#7929,.F.);+#16218=ORIENTED_EDGE('',*,*,#16139,.F.);+#16219=CYLINDRICAL_SURFACE('',#16220,0.2);+#16220=AXIS2_PLACEMENT_3D('',#16099,#422,#13100);+#16221=ADVANCED_FACE('',(#16222),#7271,.F.);+#16222=FACE_BOUND('',#16223,.F.);+#16223=EDGE_LOOP('',(#16149,#16224,#16225,#16229));+#16224=ORIENTED_EDGE('',*,*,#13310,.T.);+#16225=ORIENTED_EDGE('',*,*,#16226,.T.);+#16226=EDGE_CURVE('',#13307,#7950,#16227,.T.);+#16227=LINE('',#16228,#2043);+#16228=CARTESIAN_POINT('',(7.,-0.91,0.630119079428));+#16229=ORIENTED_EDGE('',*,*,#7949,.F.);+#16230=ADVANCED_FACE('',(#16231),#16290,.F.);+#16231=FACE_BOUND('',#16232,.F.);+#16232=EDGE_LOOP('',(#16233,#16234,#16240,#16247,#16252,#16259,#16264,#16269,#16274,#16280,#16285,#16289));+#16233=ORIENTED_EDGE('',*,*,#16226,.F.);+#16234=ORIENTED_EDGE('',*,*,#16235,.T.);+#16235=EDGE_CURVE('',#13307,#16236,#16238,.T.);+#16236=VERTEX_POINT('',#16237);+#16237=CARTESIAN_POINT('',(7.2,-0.91,0.75));+#16238=LINE('',#16239,#49);+#16239=CARTESIAN_POINT('',(6.85,-0.91,0.75));+#16240=ORIENTED_EDGE('',*,*,#16241,.T.);+#16241=EDGE_CURVE('',#16236,#16242,#16244,.T.);+#16242=VERTEX_POINT('',#16243);+#16243=CARTESIAN_POINT('',(7.298480775301,-0.91,0.667364817767));+#16244=CIRCLE('',#16245,0.1);+#16245=AXIS2_PLACEMENT_3D('',#16246,#422,#13051);+#16246=CARTESIAN_POINT('',(7.2,-0.91,0.65));+#16247=ORIENTED_EDGE('',*,*,#16248,.T.);+#16248=EDGE_CURVE('',#16242,#16249,#16251,.T.);+#16249=VERTEX_POINT('',#16250);+#16250=CARTESIAN_POINT('',(7.382385590716,-0.91,0.165270364467));+#16251=LINE('',#16243,#13057);+#16252=ORIENTED_EDGE('',*,*,#16253,.T.);+#16253=EDGE_CURVE('',#16249,#16254,#16256,.T.);+#16254=VERTEX_POINT('',#16255);+#16255=CARTESIAN_POINT('',(7.579347141319,-0.91,1.387778780781E-16));+#16256=CIRCLE('',#16257,0.2);+#16257=AXIS2_PLACEMENT_3D('',#16258,#1569,#13066);+#16258=CARTESIAN_POINT('',(7.579347141319,-0.91,0.2));+#16259=ORIENTED_EDGE('',*,*,#16260,.T.);+#16260=EDGE_CURVE('',#16254,#16261,#16263,.T.);+#16261=VERTEX_POINT('',#16262);+#16262=CARTESIAN_POINT('',(8.,-0.91,1.387778780781E-16));+#16263=LINE('',#16255,#49);+#16264=ORIENTED_EDGE('',*,*,#16265,.T.);+#16265=EDGE_CURVE('',#16261,#16266,#16268,.T.);+#16266=VERTEX_POINT('',#16267);+#16267=CARTESIAN_POINT('',(8.,-0.91,0.1));+#16268=LINE('',#16262,#2043);+#16269=ORIENTED_EDGE('',*,*,#16270,.T.);+#16270=EDGE_CURVE('',#16266,#16271,#16273,.T.);+#16271=VERTEX_POINT('',#16272);+#16272=CARTESIAN_POINT('',(7.579347141319,-0.91,0.1));+#16273=LINE('',#16267,#1576);+#16274=ORIENTED_EDGE('',*,*,#16275,.T.);+#16275=EDGE_CURVE('',#16271,#16276,#16278,.T.);+#16276=VERTEX_POINT('',#16277);+#16277=CARTESIAN_POINT('',(7.480866366018,-0.91,0.182635182233));+#16278=CIRCLE('',#16279,1.E-01);+#16279=AXIS2_PLACEMENT_3D('',#16258,#422,#13088);+#16280=ORIENTED_EDGE('',*,*,#16281,.T.);+#16281=EDGE_CURVE('',#16276,#16282,#16284,.T.);+#16282=VERTEX_POINT('',#16283);+#16283=CARTESIAN_POINT('',(7.396961550602,-0.91,0.684729635533));+#16284=LINE('',#16277,#13094);+#16285=ORIENTED_EDGE('',*,*,#16286,.T.);+#16286=EDGE_CURVE('',#16282,#7962,#16287,.T.);+#16287=CIRCLE('',#16288,0.2);+#16288=AXIS2_PLACEMENT_3D('',#16246,#1569,#13100);+#16289=ORIENTED_EDGE('',*,*,#7961,.T.);+#16290=PLANE('',#16291);+#16291=AXIS2_PLACEMENT_3D('',#16292,#1569,#13);+#16292=CARTESIAN_POINT('',(7.414276639233,-0.91,0.410238158856));+#16293=ADVANCED_FACE('',(#16294),#16355,.T.);+#16294=FACE_BOUND('',#16295,.T.);+#16295=EDGE_LOOP('',(#16296,#16300,#16306,#16313,#16318,#16325,#16330,#16335,#16340,#16346,#16351,#7968));+#16296=ORIENTED_EDGE('',*,*,#16297,.F.);+#16297=EDGE_CURVE('',#13303,#7970,#16298,.T.);+#16298=LINE('',#16299,#2043);+#16299=CARTESIAN_POINT('',(7.,-1.09,0.630119079428));+#16300=ORIENTED_EDGE('',*,*,#16301,.T.);+#16301=EDGE_CURVE('',#13303,#16302,#16304,.T.);+#16302=VERTEX_POINT('',#16303);+#16303=CARTESIAN_POINT('',(7.2,-1.09,0.75));+#16304=LINE('',#16305,#49);+#16305=CARTESIAN_POINT('',(6.85,-1.09,0.75));+#16306=ORIENTED_EDGE('',*,*,#16307,.T.);+#16307=EDGE_CURVE('',#16302,#16308,#16310,.T.);+#16308=VERTEX_POINT('',#16309);+#16309=CARTESIAN_POINT('',(7.298480775301,-1.09,0.667364817767));+#16310=CIRCLE('',#16311,0.1);+#16311=AXIS2_PLACEMENT_3D('',#16312,#422,#13051);+#16312=CARTESIAN_POINT('',(7.2,-1.09,0.65));+#16313=ORIENTED_EDGE('',*,*,#16314,.T.);+#16314=EDGE_CURVE('',#16308,#16315,#16317,.T.);+#16315=VERTEX_POINT('',#16316);+#16316=CARTESIAN_POINT('',(7.382385590716,-1.09,0.165270364467));+#16317=LINE('',#16309,#13057);+#16318=ORIENTED_EDGE('',*,*,#16319,.T.);+#16319=EDGE_CURVE('',#16315,#16320,#16322,.T.);+#16320=VERTEX_POINT('',#16321);+#16321=CARTESIAN_POINT('',(7.579347141319,-1.09,1.387778780781E-16));+#16322=CIRCLE('',#16323,0.2);+#16323=AXIS2_PLACEMENT_3D('',#16324,#1569,#13066);+#16324=CARTESIAN_POINT('',(7.579347141319,-1.09,0.2));+#16325=ORIENTED_EDGE('',*,*,#16326,.T.);+#16326=EDGE_CURVE('',#16320,#16327,#16329,.T.);+#16327=VERTEX_POINT('',#16328);+#16328=CARTESIAN_POINT('',(8.,-1.09,1.387778780781E-16));+#16329=LINE('',#16321,#49);+#16330=ORIENTED_EDGE('',*,*,#16331,.T.);+#16331=EDGE_CURVE('',#16327,#16332,#16334,.T.);+#16332=VERTEX_POINT('',#16333);+#16333=CARTESIAN_POINT('',(8.,-1.09,0.1));+#16334=LINE('',#16328,#2043);+#16335=ORIENTED_EDGE('',*,*,#16336,.T.);+#16336=EDGE_CURVE('',#16332,#16337,#16339,.T.);+#16337=VERTEX_POINT('',#16338);+#16338=CARTESIAN_POINT('',(7.579347141319,-1.09,0.1));+#16339=LINE('',#16333,#1576);+#16340=ORIENTED_EDGE('',*,*,#16341,.T.);+#16341=EDGE_CURVE('',#16337,#16342,#16344,.T.);+#16342=VERTEX_POINT('',#16343);+#16343=CARTESIAN_POINT('',(7.480866366018,-1.09,0.182635182233));+#16344=CIRCLE('',#16345,1.E-01);+#16345=AXIS2_PLACEMENT_3D('',#16324,#422,#13088);+#16346=ORIENTED_EDGE('',*,*,#16347,.T.);+#16347=EDGE_CURVE('',#16342,#16348,#16350,.T.);+#16348=VERTEX_POINT('',#16349);+#16349=CARTESIAN_POINT('',(7.396961550602,-1.09,0.684729635533));+#16350=LINE('',#16343,#13094);+#16351=ORIENTED_EDGE('',*,*,#16352,.T.);+#16352=EDGE_CURVE('',#16348,#7965,#16353,.T.);+#16353=CIRCLE('',#16354,0.2);+#16354=AXIS2_PLACEMENT_3D('',#16312,#1569,#13100);+#16355=PLANE('',#16356);+#16356=AXIS2_PLACEMENT_3D('',#16357,#1569,#13);+#16357=CARTESIAN_POINT('',(7.414276639233,-1.09,0.410238158856));+#16358=ADVANCED_FACE('',(#16359),#16366,.T.);+#16359=FACE_BOUND('',#16360,.F.);+#16360=EDGE_LOOP('',(#16361,#16351,#16364,#16365));+#16361=ORIENTED_EDGE('',*,*,#16362,.T.);+#16362=EDGE_CURVE('',#16282,#16348,#16363,.T.);+#16363=LINE('',#16283,#1568);+#16364=ORIENTED_EDGE('',*,*,#7964,.F.);+#16365=ORIENTED_EDGE('',*,*,#16286,.F.);+#16366=CYLINDRICAL_SURFACE('',#16367,0.2);+#16367=AXIS2_PLACEMENT_3D('',#16246,#422,#13100);+#16368=ADVANCED_FACE('',(#16369),#7271,.F.);+#16369=FACE_BOUND('',#16370,.F.);+#16370=EDGE_LOOP('',(#16296,#16371,#16372,#16376));+#16371=ORIENTED_EDGE('',*,*,#13302,.T.);+#16372=ORIENTED_EDGE('',*,*,#16373,.T.);+#16373=EDGE_CURVE('',#13299,#7985,#16374,.T.);+#16374=LINE('',#16375,#2043);+#16375=CARTESIAN_POINT('',(7.,-1.31,0.630119079428));+#16376=ORIENTED_EDGE('',*,*,#7984,.F.);+#16377=ADVANCED_FACE('',(#16378),#16437,.F.);+#16378=FACE_BOUND('',#16379,.F.);+#16379=EDGE_LOOP('',(#16380,#16381,#16387,#16394,#16399,#16406,#16411,#16416,#16421,#16427,#16432,#16436));+#16380=ORIENTED_EDGE('',*,*,#16373,.F.);+#16381=ORIENTED_EDGE('',*,*,#16382,.T.);+#16382=EDGE_CURVE('',#13299,#16383,#16385,.T.);+#16383=VERTEX_POINT('',#16384);+#16384=CARTESIAN_POINT('',(7.2,-1.31,0.75));+#16385=LINE('',#16386,#49);+#16386=CARTESIAN_POINT('',(6.85,-1.31,0.75));+#16387=ORIENTED_EDGE('',*,*,#16388,.T.);+#16388=EDGE_CURVE('',#16383,#16389,#16391,.T.);+#16389=VERTEX_POINT('',#16390);+#16390=CARTESIAN_POINT('',(7.298480775301,-1.31,0.667364817767));+#16391=CIRCLE('',#16392,0.1);+#16392=AXIS2_PLACEMENT_3D('',#16393,#422,#13051);+#16393=CARTESIAN_POINT('',(7.2,-1.31,0.65));+#16394=ORIENTED_EDGE('',*,*,#16395,.T.);+#16395=EDGE_CURVE('',#16389,#16396,#16398,.T.);+#16396=VERTEX_POINT('',#16397);+#16397=CARTESIAN_POINT('',(7.382385590716,-1.31,0.165270364467));+#16398=LINE('',#16390,#13057);+#16399=ORIENTED_EDGE('',*,*,#16400,.T.);+#16400=EDGE_CURVE('',#16396,#16401,#16403,.T.);+#16401=VERTEX_POINT('',#16402);+#16402=CARTESIAN_POINT('',(7.579347141319,-1.31,1.387778780781E-16));+#16403=CIRCLE('',#16404,0.2);+#16404=AXIS2_PLACEMENT_3D('',#16405,#1569,#13066);+#16405=CARTESIAN_POINT('',(7.579347141319,-1.31,0.2));+#16406=ORIENTED_EDGE('',*,*,#16407,.T.);+#16407=EDGE_CURVE('',#16401,#16408,#16410,.T.);+#16408=VERTEX_POINT('',#16409);+#16409=CARTESIAN_POINT('',(8.,-1.31,1.387778780781E-16));+#16410=LINE('',#16402,#49);+#16411=ORIENTED_EDGE('',*,*,#16412,.T.);+#16412=EDGE_CURVE('',#16408,#16413,#16415,.T.);+#16413=VERTEX_POINT('',#16414);+#16414=CARTESIAN_POINT('',(8.,-1.31,0.1));+#16415=LINE('',#16409,#2043);+#16416=ORIENTED_EDGE('',*,*,#16417,.T.);+#16417=EDGE_CURVE('',#16413,#16418,#16420,.T.);+#16418=VERTEX_POINT('',#16419);+#16419=CARTESIAN_POINT('',(7.579347141319,-1.31,0.1));+#16420=LINE('',#16414,#1576);+#16421=ORIENTED_EDGE('',*,*,#16422,.T.);+#16422=EDGE_CURVE('',#16418,#16423,#16425,.T.);+#16423=VERTEX_POINT('',#16424);+#16424=CARTESIAN_POINT('',(7.480866366018,-1.31,0.182635182233));+#16425=CIRCLE('',#16426,1.E-01);+#16426=AXIS2_PLACEMENT_3D('',#16405,#422,#13088);+#16427=ORIENTED_EDGE('',*,*,#16428,.T.);+#16428=EDGE_CURVE('',#16423,#16429,#16431,.T.);+#16429=VERTEX_POINT('',#16430);+#16430=CARTESIAN_POINT('',(7.396961550602,-1.31,0.684729635533));+#16431=LINE('',#16424,#13094);+#16432=ORIENTED_EDGE('',*,*,#16433,.T.);+#16433=EDGE_CURVE('',#16429,#7997,#16434,.T.);+#16434=CIRCLE('',#16435,0.2);+#16435=AXIS2_PLACEMENT_3D('',#16393,#1569,#13100);+#16436=ORIENTED_EDGE('',*,*,#7996,.T.);+#16437=PLANE('',#16438);+#16438=AXIS2_PLACEMENT_3D('',#16439,#1569,#13);+#16439=CARTESIAN_POINT('',(7.414276639233,-1.31,0.410238158856));+#16440=ADVANCED_FACE('',(#16441),#16502,.T.);+#16441=FACE_BOUND('',#16442,.T.);+#16442=EDGE_LOOP('',(#16443,#16447,#16453,#16460,#16465,#16472,#16477,#16482,#16487,#16493,#16498,#8003));+#16443=ORIENTED_EDGE('',*,*,#16444,.F.);+#16444=EDGE_CURVE('',#13295,#8005,#16445,.T.);+#16445=LINE('',#16446,#2043);+#16446=CARTESIAN_POINT('',(7.,-1.49,0.630119079428));+#16447=ORIENTED_EDGE('',*,*,#16448,.T.);+#16448=EDGE_CURVE('',#13295,#16449,#16451,.T.);+#16449=VERTEX_POINT('',#16450);+#16450=CARTESIAN_POINT('',(7.2,-1.49,0.75));+#16451=LINE('',#16452,#49);+#16452=CARTESIAN_POINT('',(6.85,-1.49,0.75));+#16453=ORIENTED_EDGE('',*,*,#16454,.T.);+#16454=EDGE_CURVE('',#16449,#16455,#16457,.T.);+#16455=VERTEX_POINT('',#16456);+#16456=CARTESIAN_POINT('',(7.298480775301,-1.49,0.667364817767));+#16457=CIRCLE('',#16458,0.1);+#16458=AXIS2_PLACEMENT_3D('',#16459,#422,#13051);+#16459=CARTESIAN_POINT('',(7.2,-1.49,0.65));+#16460=ORIENTED_EDGE('',*,*,#16461,.T.);+#16461=EDGE_CURVE('',#16455,#16462,#16464,.T.);+#16462=VERTEX_POINT('',#16463);+#16463=CARTESIAN_POINT('',(7.382385590716,-1.49,0.165270364467));+#16464=LINE('',#16456,#13057);+#16465=ORIENTED_EDGE('',*,*,#16466,.T.);+#16466=EDGE_CURVE('',#16462,#16467,#16469,.T.);+#16467=VERTEX_POINT('',#16468);+#16468=CARTESIAN_POINT('',(7.579347141319,-1.49,1.387778780781E-16));+#16469=CIRCLE('',#16470,0.2);+#16470=AXIS2_PLACEMENT_3D('',#16471,#1569,#13066);+#16471=CARTESIAN_POINT('',(7.579347141319,-1.49,0.2));+#16472=ORIENTED_EDGE('',*,*,#16473,.T.);+#16473=EDGE_CURVE('',#16467,#16474,#16476,.T.);+#16474=VERTEX_POINT('',#16475);+#16475=CARTESIAN_POINT('',(8.,-1.49,1.387778780781E-16));+#16476=LINE('',#16468,#49);+#16477=ORIENTED_EDGE('',*,*,#16478,.T.);+#16478=EDGE_CURVE('',#16474,#16479,#16481,.T.);+#16479=VERTEX_POINT('',#16480);+#16480=CARTESIAN_POINT('',(8.,-1.49,0.1));+#16481=LINE('',#16475,#2043);+#16482=ORIENTED_EDGE('',*,*,#16483,.T.);+#16483=EDGE_CURVE('',#16479,#16484,#16486,.T.);+#16484=VERTEX_POINT('',#16485);+#16485=CARTESIAN_POINT('',(7.579347141319,-1.49,0.1));+#16486=LINE('',#16480,#1576);+#16487=ORIENTED_EDGE('',*,*,#16488,.T.);+#16488=EDGE_CURVE('',#16484,#16489,#16491,.T.);+#16489=VERTEX_POINT('',#16490);+#16490=CARTESIAN_POINT('',(7.480866366018,-1.49,0.182635182233));+#16491=CIRCLE('',#16492,1.E-01);+#16492=AXIS2_PLACEMENT_3D('',#16471,#422,#13088);+#16493=ORIENTED_EDGE('',*,*,#16494,.T.);+#16494=EDGE_CURVE('',#16489,#16495,#16497,.T.);+#16495=VERTEX_POINT('',#16496);+#16496=CARTESIAN_POINT('',(7.396961550602,-1.49,0.684729635533));+#16497=LINE('',#16490,#13094);+#16498=ORIENTED_EDGE('',*,*,#16499,.T.);+#16499=EDGE_CURVE('',#16495,#8000,#16500,.T.);+#16500=CIRCLE('',#16501,0.2);+#16501=AXIS2_PLACEMENT_3D('',#16459,#1569,#13100);+#16502=PLANE('',#16503);+#16503=AXIS2_PLACEMENT_3D('',#16504,#1569,#13);+#16504=CARTESIAN_POINT('',(7.414276639233,-1.49,0.410238158856));+#16505=ADVANCED_FACE('',(#16506),#16513,.T.);+#16506=FACE_BOUND('',#16507,.F.);+#16507=EDGE_LOOP('',(#16508,#16498,#16511,#16512));+#16508=ORIENTED_EDGE('',*,*,#16509,.T.);+#16509=EDGE_CURVE('',#16429,#16495,#16510,.T.);+#16510=LINE('',#16430,#1568);+#16511=ORIENTED_EDGE('',*,*,#7999,.F.);+#16512=ORIENTED_EDGE('',*,*,#16433,.F.);+#16513=CYLINDRICAL_SURFACE('',#16514,0.2);+#16514=AXIS2_PLACEMENT_3D('',#16393,#422,#13100);+#16515=ADVANCED_FACE('',(#16516),#7271,.F.);+#16516=FACE_BOUND('',#16517,.F.);+#16517=EDGE_LOOP('',(#16443,#16518,#16519,#16523));+#16518=ORIENTED_EDGE('',*,*,#13294,.T.);+#16519=ORIENTED_EDGE('',*,*,#16520,.T.);+#16520=EDGE_CURVE('',#13291,#8020,#16521,.T.);+#16521=LINE('',#16522,#2043);+#16522=CARTESIAN_POINT('',(7.,-1.71,0.630119079428));+#16523=ORIENTED_EDGE('',*,*,#8019,.F.);+#16524=ADVANCED_FACE('',(#16525),#16584,.F.);+#16525=FACE_BOUND('',#16526,.F.);+#16526=EDGE_LOOP('',(#16527,#16528,#16534,#16541,#16546,#16553,#16558,#16563,#16568,#16574,#16579,#16583));+#16527=ORIENTED_EDGE('',*,*,#16520,.F.);+#16528=ORIENTED_EDGE('',*,*,#16529,.T.);+#16529=EDGE_CURVE('',#13291,#16530,#16532,.T.);+#16530=VERTEX_POINT('',#16531);+#16531=CARTESIAN_POINT('',(7.2,-1.71,0.75));+#16532=LINE('',#16533,#49);+#16533=CARTESIAN_POINT('',(6.85,-1.71,0.75));+#16534=ORIENTED_EDGE('',*,*,#16535,.T.);+#16535=EDGE_CURVE('',#16530,#16536,#16538,.T.);+#16536=VERTEX_POINT('',#16537);+#16537=CARTESIAN_POINT('',(7.298480775301,-1.71,0.667364817767));+#16538=CIRCLE('',#16539,0.1);+#16539=AXIS2_PLACEMENT_3D('',#16540,#422,#13051);+#16540=CARTESIAN_POINT('',(7.2,-1.71,0.65));+#16541=ORIENTED_EDGE('',*,*,#16542,.T.);+#16542=EDGE_CURVE('',#16536,#16543,#16545,.T.);+#16543=VERTEX_POINT('',#16544);+#16544=CARTESIAN_POINT('',(7.382385590716,-1.71,0.165270364467));+#16545=LINE('',#16537,#13057);+#16546=ORIENTED_EDGE('',*,*,#16547,.T.);+#16547=EDGE_CURVE('',#16543,#16548,#16550,.T.);+#16548=VERTEX_POINT('',#16549);+#16549=CARTESIAN_POINT('',(7.579347141319,-1.71,1.387778780781E-16));+#16550=CIRCLE('',#16551,0.2);+#16551=AXIS2_PLACEMENT_3D('',#16552,#1569,#13066);+#16552=CARTESIAN_POINT('',(7.579347141319,-1.71,0.2));+#16553=ORIENTED_EDGE('',*,*,#16554,.T.);+#16554=EDGE_CURVE('',#16548,#16555,#16557,.T.);+#16555=VERTEX_POINT('',#16556);+#16556=CARTESIAN_POINT('',(8.,-1.71,1.387778780781E-16));+#16557=LINE('',#16549,#49);+#16558=ORIENTED_EDGE('',*,*,#16559,.T.);+#16559=EDGE_CURVE('',#16555,#16560,#16562,.T.);+#16560=VERTEX_POINT('',#16561);+#16561=CARTESIAN_POINT('',(8.,-1.71,0.1));+#16562=LINE('',#16556,#2043);+#16563=ORIENTED_EDGE('',*,*,#16564,.T.);+#16564=EDGE_CURVE('',#16560,#16565,#16567,.T.);+#16565=VERTEX_POINT('',#16566);+#16566=CARTESIAN_POINT('',(7.579347141319,-1.71,0.1));+#16567=LINE('',#16561,#1576);+#16568=ORIENTED_EDGE('',*,*,#16569,.T.);+#16569=EDGE_CURVE('',#16565,#16570,#16572,.T.);+#16570=VERTEX_POINT('',#16571);+#16571=CARTESIAN_POINT('',(7.480866366018,-1.71,0.182635182233));+#16572=CIRCLE('',#16573,1.E-01);+#16573=AXIS2_PLACEMENT_3D('',#16552,#422,#13088);+#16574=ORIENTED_EDGE('',*,*,#16575,.T.);+#16575=EDGE_CURVE('',#16570,#16576,#16578,.T.);+#16576=VERTEX_POINT('',#16577);+#16577=CARTESIAN_POINT('',(7.396961550602,-1.71,0.684729635533));+#16578=LINE('',#16571,#13094);+#16579=ORIENTED_EDGE('',*,*,#16580,.T.);+#16580=EDGE_CURVE('',#16576,#8032,#16581,.T.);+#16581=CIRCLE('',#16582,0.2);+#16582=AXIS2_PLACEMENT_3D('',#16540,#1569,#13100);+#16583=ORIENTED_EDGE('',*,*,#8031,.T.);+#16584=PLANE('',#16585);+#16585=AXIS2_PLACEMENT_3D('',#16586,#1569,#13);+#16586=CARTESIAN_POINT('',(7.414276639233,-1.71,0.410238158856));+#16587=ADVANCED_FACE('',(#16588),#16649,.T.);+#16588=FACE_BOUND('',#16589,.T.);+#16589=EDGE_LOOP('',(#16590,#16594,#16600,#16607,#16612,#16619,#16624,#16629,#16634,#16640,#16645,#8038));+#16590=ORIENTED_EDGE('',*,*,#16591,.F.);+#16591=EDGE_CURVE('',#13287,#8040,#16592,.T.);+#16592=LINE('',#16593,#2043);+#16593=CARTESIAN_POINT('',(7.,-1.89,0.630119079428));+#16594=ORIENTED_EDGE('',*,*,#16595,.T.);+#16595=EDGE_CURVE('',#13287,#16596,#16598,.T.);+#16596=VERTEX_POINT('',#16597);+#16597=CARTESIAN_POINT('',(7.2,-1.89,0.75));+#16598=LINE('',#16599,#49);+#16599=CARTESIAN_POINT('',(6.85,-1.89,0.75));+#16600=ORIENTED_EDGE('',*,*,#16601,.T.);+#16601=EDGE_CURVE('',#16596,#16602,#16604,.T.);+#16602=VERTEX_POINT('',#16603);+#16603=CARTESIAN_POINT('',(7.298480775301,-1.89,0.667364817767));+#16604=CIRCLE('',#16605,0.1);+#16605=AXIS2_PLACEMENT_3D('',#16606,#422,#13051);+#16606=CARTESIAN_POINT('',(7.2,-1.89,0.65));+#16607=ORIENTED_EDGE('',*,*,#16608,.T.);+#16608=EDGE_CURVE('',#16602,#16609,#16611,.T.);+#16609=VERTEX_POINT('',#16610);+#16610=CARTESIAN_POINT('',(7.382385590716,-1.89,0.165270364467));+#16611=LINE('',#16603,#13057);+#16612=ORIENTED_EDGE('',*,*,#16613,.T.);+#16613=EDGE_CURVE('',#16609,#16614,#16616,.T.);+#16614=VERTEX_POINT('',#16615);+#16615=CARTESIAN_POINT('',(7.579347141319,-1.89,1.387778780781E-16));+#16616=CIRCLE('',#16617,0.2);+#16617=AXIS2_PLACEMENT_3D('',#16618,#1569,#13066);+#16618=CARTESIAN_POINT('',(7.579347141319,-1.89,0.2));+#16619=ORIENTED_EDGE('',*,*,#16620,.T.);+#16620=EDGE_CURVE('',#16614,#16621,#16623,.T.);+#16621=VERTEX_POINT('',#16622);+#16622=CARTESIAN_POINT('',(8.,-1.89,1.387778780781E-16));+#16623=LINE('',#16615,#49);+#16624=ORIENTED_EDGE('',*,*,#16625,.T.);+#16625=EDGE_CURVE('',#16621,#16626,#16628,.T.);+#16626=VERTEX_POINT('',#16627);+#16627=CARTESIAN_POINT('',(8.,-1.89,0.1));+#16628=LINE('',#16622,#2043);+#16629=ORIENTED_EDGE('',*,*,#16630,.T.);+#16630=EDGE_CURVE('',#16626,#16631,#16633,.T.);+#16631=VERTEX_POINT('',#16632);+#16632=CARTESIAN_POINT('',(7.579347141319,-1.89,0.1));+#16633=LINE('',#16627,#1576);+#16634=ORIENTED_EDGE('',*,*,#16635,.T.);+#16635=EDGE_CURVE('',#16631,#16636,#16638,.T.);+#16636=VERTEX_POINT('',#16637);+#16637=CARTESIAN_POINT('',(7.480866366018,-1.89,0.182635182233));+#16638=CIRCLE('',#16639,1.E-01);+#16639=AXIS2_PLACEMENT_3D('',#16618,#422,#13088);+#16640=ORIENTED_EDGE('',*,*,#16641,.T.);+#16641=EDGE_CURVE('',#16636,#16642,#16644,.T.);+#16642=VERTEX_POINT('',#16643);+#16643=CARTESIAN_POINT('',(7.396961550602,-1.89,0.684729635533));+#16644=LINE('',#16637,#13094);+#16645=ORIENTED_EDGE('',*,*,#16646,.T.);+#16646=EDGE_CURVE('',#16642,#8035,#16647,.T.);+#16647=CIRCLE('',#16648,0.2);+#16648=AXIS2_PLACEMENT_3D('',#16606,#1569,#13100);+#16649=PLANE('',#16650);+#16650=AXIS2_PLACEMENT_3D('',#16651,#1569,#13);+#16651=CARTESIAN_POINT('',(7.414276639233,-1.89,0.410238158856));+#16652=ADVANCED_FACE('',(#16653),#16660,.T.);+#16653=FACE_BOUND('',#16654,.F.);+#16654=EDGE_LOOP('',(#16655,#16645,#16658,#16659));+#16655=ORIENTED_EDGE('',*,*,#16656,.T.);+#16656=EDGE_CURVE('',#16576,#16642,#16657,.T.);+#16657=LINE('',#16577,#1568);+#16658=ORIENTED_EDGE('',*,*,#8034,.F.);+#16659=ORIENTED_EDGE('',*,*,#16580,.F.);+#16660=CYLINDRICAL_SURFACE('',#16661,0.2);+#16661=AXIS2_PLACEMENT_3D('',#16540,#422,#13100);+#16662=ADVANCED_FACE('',(#16663),#7271,.F.);+#16663=FACE_BOUND('',#16664,.F.);+#16664=EDGE_LOOP('',(#16590,#16665,#16666,#16670));+#16665=ORIENTED_EDGE('',*,*,#13286,.T.);+#16666=ORIENTED_EDGE('',*,*,#16667,.T.);+#16667=EDGE_CURVE('',#13283,#8055,#16668,.T.);+#16668=LINE('',#16669,#2043);+#16669=CARTESIAN_POINT('',(7.,-2.11,0.630119079428));+#16670=ORIENTED_EDGE('',*,*,#8054,.F.);+#16671=ADVANCED_FACE('',(#16672),#16731,.F.);+#16672=FACE_BOUND('',#16673,.F.);+#16673=EDGE_LOOP('',(#16674,#16675,#16681,#16688,#16693,#16700,#16705,#16710,#16715,#16721,#16726,#16730));+#16674=ORIENTED_EDGE('',*,*,#16667,.F.);+#16675=ORIENTED_EDGE('',*,*,#16676,.T.);+#16676=EDGE_CURVE('',#13283,#16677,#16679,.T.);+#16677=VERTEX_POINT('',#16678);+#16678=CARTESIAN_POINT('',(7.2,-2.11,0.75));+#16679=LINE('',#16680,#49);+#16680=CARTESIAN_POINT('',(6.85,-2.11,0.75));+#16681=ORIENTED_EDGE('',*,*,#16682,.T.);+#16682=EDGE_CURVE('',#16677,#16683,#16685,.T.);+#16683=VERTEX_POINT('',#16684);+#16684=CARTESIAN_POINT('',(7.298480775301,-2.11,0.667364817767));+#16685=CIRCLE('',#16686,0.1);+#16686=AXIS2_PLACEMENT_3D('',#16687,#422,#13051);+#16687=CARTESIAN_POINT('',(7.2,-2.11,0.65));+#16688=ORIENTED_EDGE('',*,*,#16689,.T.);+#16689=EDGE_CURVE('',#16683,#16690,#16692,.T.);+#16690=VERTEX_POINT('',#16691);+#16691=CARTESIAN_POINT('',(7.382385590716,-2.11,0.165270364467));+#16692=LINE('',#16684,#13057);+#16693=ORIENTED_EDGE('',*,*,#16694,.T.);+#16694=EDGE_CURVE('',#16690,#16695,#16697,.T.);+#16695=VERTEX_POINT('',#16696);+#16696=CARTESIAN_POINT('',(7.579347141319,-2.11,1.387778780781E-16));+#16697=CIRCLE('',#16698,0.2);+#16698=AXIS2_PLACEMENT_3D('',#16699,#1569,#13066);+#16699=CARTESIAN_POINT('',(7.579347141319,-2.11,0.2));+#16700=ORIENTED_EDGE('',*,*,#16701,.T.);+#16701=EDGE_CURVE('',#16695,#16702,#16704,.T.);+#16702=VERTEX_POINT('',#16703);+#16703=CARTESIAN_POINT('',(8.,-2.11,1.387778780781E-16));+#16704=LINE('',#16696,#49);+#16705=ORIENTED_EDGE('',*,*,#16706,.T.);+#16706=EDGE_CURVE('',#16702,#16707,#16709,.T.);+#16707=VERTEX_POINT('',#16708);+#16708=CARTESIAN_POINT('',(8.,-2.11,0.1));+#16709=LINE('',#16703,#2043);+#16710=ORIENTED_EDGE('',*,*,#16711,.T.);+#16711=EDGE_CURVE('',#16707,#16712,#16714,.T.);+#16712=VERTEX_POINT('',#16713);+#16713=CARTESIAN_POINT('',(7.579347141319,-2.11,0.1));+#16714=LINE('',#16708,#1576);+#16715=ORIENTED_EDGE('',*,*,#16716,.T.);+#16716=EDGE_CURVE('',#16712,#16717,#16719,.T.);+#16717=VERTEX_POINT('',#16718);+#16718=CARTESIAN_POINT('',(7.480866366018,-2.11,0.182635182233));+#16719=CIRCLE('',#16720,1.E-01);+#16720=AXIS2_PLACEMENT_3D('',#16699,#422,#13088);+#16721=ORIENTED_EDGE('',*,*,#16722,.T.);+#16722=EDGE_CURVE('',#16717,#16723,#16725,.T.);+#16723=VERTEX_POINT('',#16724);+#16724=CARTESIAN_POINT('',(7.396961550602,-2.11,0.684729635533));+#16725=LINE('',#16718,#13094);+#16726=ORIENTED_EDGE('',*,*,#16727,.T.);+#16727=EDGE_CURVE('',#16723,#8067,#16728,.T.);+#16728=CIRCLE('',#16729,0.2);+#16729=AXIS2_PLACEMENT_3D('',#16687,#1569,#13100);+#16730=ORIENTED_EDGE('',*,*,#8066,.T.);+#16731=PLANE('',#16732);+#16732=AXIS2_PLACEMENT_3D('',#16733,#1569,#13);+#16733=CARTESIAN_POINT('',(7.414276639233,-2.11,0.410238158856));+#16734=ADVANCED_FACE('',(#16735),#16796,.T.);+#16735=FACE_BOUND('',#16736,.T.);+#16736=EDGE_LOOP('',(#16737,#16741,#16747,#16754,#16759,#16766,#16771,#16776,#16781,#16787,#16792,#8073));+#16737=ORIENTED_EDGE('',*,*,#16738,.F.);+#16738=EDGE_CURVE('',#13279,#8075,#16739,.T.);+#16739=LINE('',#16740,#2043);+#16740=CARTESIAN_POINT('',(7.,-2.29,0.630119079428));+#16741=ORIENTED_EDGE('',*,*,#16742,.T.);+#16742=EDGE_CURVE('',#13279,#16743,#16745,.T.);+#16743=VERTEX_POINT('',#16744);+#16744=CARTESIAN_POINT('',(7.2,-2.29,0.75));+#16745=LINE('',#16746,#49);+#16746=CARTESIAN_POINT('',(6.85,-2.29,0.75));+#16747=ORIENTED_EDGE('',*,*,#16748,.T.);+#16748=EDGE_CURVE('',#16743,#16749,#16751,.T.);+#16749=VERTEX_POINT('',#16750);+#16750=CARTESIAN_POINT('',(7.298480775301,-2.29,0.667364817767));+#16751=CIRCLE('',#16752,0.1);+#16752=AXIS2_PLACEMENT_3D('',#16753,#422,#13051);+#16753=CARTESIAN_POINT('',(7.2,-2.29,0.65));+#16754=ORIENTED_EDGE('',*,*,#16755,.T.);+#16755=EDGE_CURVE('',#16749,#16756,#16758,.T.);+#16756=VERTEX_POINT('',#16757);+#16757=CARTESIAN_POINT('',(7.382385590716,-2.29,0.165270364467));+#16758=LINE('',#16750,#13057);+#16759=ORIENTED_EDGE('',*,*,#16760,.T.);+#16760=EDGE_CURVE('',#16756,#16761,#16763,.T.);+#16761=VERTEX_POINT('',#16762);+#16762=CARTESIAN_POINT('',(7.579347141319,-2.29,1.387778780781E-16));+#16763=CIRCLE('',#16764,0.2);+#16764=AXIS2_PLACEMENT_3D('',#16765,#1569,#13066);+#16765=CARTESIAN_POINT('',(7.579347141319,-2.29,0.2));+#16766=ORIENTED_EDGE('',*,*,#16767,.T.);+#16767=EDGE_CURVE('',#16761,#16768,#16770,.T.);+#16768=VERTEX_POINT('',#16769);+#16769=CARTESIAN_POINT('',(8.,-2.29,1.387778780781E-16));+#16770=LINE('',#16762,#49);+#16771=ORIENTED_EDGE('',*,*,#16772,.T.);+#16772=EDGE_CURVE('',#16768,#16773,#16775,.T.);+#16773=VERTEX_POINT('',#16774);+#16774=CARTESIAN_POINT('',(8.,-2.29,0.1));+#16775=LINE('',#16769,#2043);+#16776=ORIENTED_EDGE('',*,*,#16777,.T.);+#16777=EDGE_CURVE('',#16773,#16778,#16780,.T.);+#16778=VERTEX_POINT('',#16779);+#16779=CARTESIAN_POINT('',(7.579347141319,-2.29,0.1));+#16780=LINE('',#16774,#1576);+#16781=ORIENTED_EDGE('',*,*,#16782,.T.);+#16782=EDGE_CURVE('',#16778,#16783,#16785,.T.);+#16783=VERTEX_POINT('',#16784);+#16784=CARTESIAN_POINT('',(7.480866366018,-2.29,0.182635182233));+#16785=CIRCLE('',#16786,1.E-01);+#16786=AXIS2_PLACEMENT_3D('',#16765,#422,#13088);+#16787=ORIENTED_EDGE('',*,*,#16788,.T.);+#16788=EDGE_CURVE('',#16783,#16789,#16791,.T.);+#16789=VERTEX_POINT('',#16790);+#16790=CARTESIAN_POINT('',(7.396961550602,-2.29,0.684729635533));+#16791=LINE('',#16784,#13094);+#16792=ORIENTED_EDGE('',*,*,#16793,.T.);+#16793=EDGE_CURVE('',#16789,#8070,#16794,.T.);+#16794=CIRCLE('',#16795,0.2);+#16795=AXIS2_PLACEMENT_3D('',#16753,#1569,#13100);+#16796=PLANE('',#16797);+#16797=AXIS2_PLACEMENT_3D('',#16798,#1569,#13);+#16798=CARTESIAN_POINT('',(7.414276639233,-2.29,0.410238158856));+#16799=ADVANCED_FACE('',(#16800),#16807,.T.);+#16800=FACE_BOUND('',#16801,.F.);+#16801=EDGE_LOOP('',(#16802,#16792,#16805,#16806));+#16802=ORIENTED_EDGE('',*,*,#16803,.T.);+#16803=EDGE_CURVE('',#16723,#16789,#16804,.T.);+#16804=LINE('',#16724,#1568);+#16805=ORIENTED_EDGE('',*,*,#8069,.F.);+#16806=ORIENTED_EDGE('',*,*,#16727,.F.);+#16807=CYLINDRICAL_SURFACE('',#16808,0.2);+#16808=AXIS2_PLACEMENT_3D('',#16687,#422,#13100);+#16809=ADVANCED_FACE('',(#16810),#7271,.F.);+#16810=FACE_BOUND('',#16811,.F.);+#16811=EDGE_LOOP('',(#16737,#16812,#16813,#16817));+#16812=ORIENTED_EDGE('',*,*,#13278,.T.);+#16813=ORIENTED_EDGE('',*,*,#16814,.T.);+#16814=EDGE_CURVE('',#13275,#8090,#16815,.T.);+#16815=LINE('',#16816,#2043);+#16816=CARTESIAN_POINT('',(7.,-2.51,0.630119079428));+#16817=ORIENTED_EDGE('',*,*,#8089,.F.);+#16818=ADVANCED_FACE('',(#16819),#16878,.F.);+#16819=FACE_BOUND('',#16820,.F.);+#16820=EDGE_LOOP('',(#16821,#16822,#16828,#16835,#16840,#16847,#16852,#16857,#16862,#16868,#16873,#16877));+#16821=ORIENTED_EDGE('',*,*,#16814,.F.);+#16822=ORIENTED_EDGE('',*,*,#16823,.T.);+#16823=EDGE_CURVE('',#13275,#16824,#16826,.T.);+#16824=VERTEX_POINT('',#16825);+#16825=CARTESIAN_POINT('',(7.2,-2.51,0.75));+#16826=LINE('',#16827,#49);+#16827=CARTESIAN_POINT('',(6.85,-2.51,0.75));+#16828=ORIENTED_EDGE('',*,*,#16829,.T.);+#16829=EDGE_CURVE('',#16824,#16830,#16832,.T.);+#16830=VERTEX_POINT('',#16831);+#16831=CARTESIAN_POINT('',(7.298480775301,-2.51,0.667364817767));+#16832=CIRCLE('',#16833,0.1);+#16833=AXIS2_PLACEMENT_3D('',#16834,#422,#13051);+#16834=CARTESIAN_POINT('',(7.2,-2.51,0.65));+#16835=ORIENTED_EDGE('',*,*,#16836,.T.);+#16836=EDGE_CURVE('',#16830,#16837,#16839,.T.);+#16837=VERTEX_POINT('',#16838);+#16838=CARTESIAN_POINT('',(7.382385590716,-2.51,0.165270364467));+#16839=LINE('',#16831,#13057);+#16840=ORIENTED_EDGE('',*,*,#16841,.T.);+#16841=EDGE_CURVE('',#16837,#16842,#16844,.T.);+#16842=VERTEX_POINT('',#16843);+#16843=CARTESIAN_POINT('',(7.579347141319,-2.51,1.387778780781E-16));+#16844=CIRCLE('',#16845,0.2);+#16845=AXIS2_PLACEMENT_3D('',#16846,#1569,#13066);+#16846=CARTESIAN_POINT('',(7.579347141319,-2.51,0.2));+#16847=ORIENTED_EDGE('',*,*,#16848,.T.);+#16848=EDGE_CURVE('',#16842,#16849,#16851,.T.);+#16849=VERTEX_POINT('',#16850);+#16850=CARTESIAN_POINT('',(8.,-2.51,1.387778780781E-16));+#16851=LINE('',#16843,#49);+#16852=ORIENTED_EDGE('',*,*,#16853,.T.);+#16853=EDGE_CURVE('',#16849,#16854,#16856,.T.);+#16854=VERTEX_POINT('',#16855);+#16855=CARTESIAN_POINT('',(8.,-2.51,0.1));+#16856=LINE('',#16850,#2043);+#16857=ORIENTED_EDGE('',*,*,#16858,.T.);+#16858=EDGE_CURVE('',#16854,#16859,#16861,.T.);+#16859=VERTEX_POINT('',#16860);+#16860=CARTESIAN_POINT('',(7.579347141319,-2.51,0.1));+#16861=LINE('',#16855,#1576);+#16862=ORIENTED_EDGE('',*,*,#16863,.T.);+#16863=EDGE_CURVE('',#16859,#16864,#16866,.T.);+#16864=VERTEX_POINT('',#16865);+#16865=CARTESIAN_POINT('',(7.480866366018,-2.51,0.182635182233));+#16866=CIRCLE('',#16867,1.E-01);+#16867=AXIS2_PLACEMENT_3D('',#16846,#422,#13088);+#16868=ORIENTED_EDGE('',*,*,#16869,.T.);+#16869=EDGE_CURVE('',#16864,#16870,#16872,.T.);+#16870=VERTEX_POINT('',#16871);+#16871=CARTESIAN_POINT('',(7.396961550602,-2.51,0.684729635533));+#16872=LINE('',#16865,#13094);+#16873=ORIENTED_EDGE('',*,*,#16874,.T.);+#16874=EDGE_CURVE('',#16870,#8102,#16875,.T.);+#16875=CIRCLE('',#16876,0.2);+#16876=AXIS2_PLACEMENT_3D('',#16834,#1569,#13100);+#16877=ORIENTED_EDGE('',*,*,#8101,.T.);+#16878=PLANE('',#16879);+#16879=AXIS2_PLACEMENT_3D('',#16880,#1569,#13);+#16880=CARTESIAN_POINT('',(7.414276639233,-2.51,0.410238158856));+#16881=ADVANCED_FACE('',(#16882),#16943,.T.);+#16882=FACE_BOUND('',#16883,.T.);+#16883=EDGE_LOOP('',(#16884,#16888,#16894,#16901,#16906,#16913,#16918,#16923,#16928,#16934,#16939,#8108));+#16884=ORIENTED_EDGE('',*,*,#16885,.F.);+#16885=EDGE_CURVE('',#13271,#8110,#16886,.T.);+#16886=LINE('',#16887,#2043);+#16887=CARTESIAN_POINT('',(7.,-2.69,0.630119079428));+#16888=ORIENTED_EDGE('',*,*,#16889,.T.);+#16889=EDGE_CURVE('',#13271,#16890,#16892,.T.);+#16890=VERTEX_POINT('',#16891);+#16891=CARTESIAN_POINT('',(7.2,-2.69,0.75));+#16892=LINE('',#16893,#49);+#16893=CARTESIAN_POINT('',(6.85,-2.69,0.75));+#16894=ORIENTED_EDGE('',*,*,#16895,.T.);+#16895=EDGE_CURVE('',#16890,#16896,#16898,.T.);+#16896=VERTEX_POINT('',#16897);+#16897=CARTESIAN_POINT('',(7.298480775301,-2.69,0.667364817767));+#16898=CIRCLE('',#16899,0.1);+#16899=AXIS2_PLACEMENT_3D('',#16900,#422,#13051);+#16900=CARTESIAN_POINT('',(7.2,-2.69,0.65));+#16901=ORIENTED_EDGE('',*,*,#16902,.T.);+#16902=EDGE_CURVE('',#16896,#16903,#16905,.T.);+#16903=VERTEX_POINT('',#16904);+#16904=CARTESIAN_POINT('',(7.382385590716,-2.69,0.165270364467));+#16905=LINE('',#16897,#13057);+#16906=ORIENTED_EDGE('',*,*,#16907,.T.);+#16907=EDGE_CURVE('',#16903,#16908,#16910,.T.);+#16908=VERTEX_POINT('',#16909);+#16909=CARTESIAN_POINT('',(7.579347141319,-2.69,1.387778780781E-16));+#16910=CIRCLE('',#16911,0.2);+#16911=AXIS2_PLACEMENT_3D('',#16912,#1569,#13066);+#16912=CARTESIAN_POINT('',(7.579347141319,-2.69,0.2));+#16913=ORIENTED_EDGE('',*,*,#16914,.T.);+#16914=EDGE_CURVE('',#16908,#16915,#16917,.T.);+#16915=VERTEX_POINT('',#16916);+#16916=CARTESIAN_POINT('',(8.,-2.69,1.387778780781E-16));+#16917=LINE('',#16909,#49);+#16918=ORIENTED_EDGE('',*,*,#16919,.T.);+#16919=EDGE_CURVE('',#16915,#16920,#16922,.T.);+#16920=VERTEX_POINT('',#16921);+#16921=CARTESIAN_POINT('',(8.,-2.69,0.1));+#16922=LINE('',#16916,#2043);+#16923=ORIENTED_EDGE('',*,*,#16924,.T.);+#16924=EDGE_CURVE('',#16920,#16925,#16927,.T.);+#16925=VERTEX_POINT('',#16926);+#16926=CARTESIAN_POINT('',(7.579347141319,-2.69,0.1));+#16927=LINE('',#16921,#1576);+#16928=ORIENTED_EDGE('',*,*,#16929,.T.);+#16929=EDGE_CURVE('',#16925,#16930,#16932,.T.);+#16930=VERTEX_POINT('',#16931);+#16931=CARTESIAN_POINT('',(7.480866366018,-2.69,0.182635182233));+#16932=CIRCLE('',#16933,1.E-01);+#16933=AXIS2_PLACEMENT_3D('',#16912,#422,#13088);+#16934=ORIENTED_EDGE('',*,*,#16935,.T.);+#16935=EDGE_CURVE('',#16930,#16936,#16938,.T.);+#16936=VERTEX_POINT('',#16937);+#16937=CARTESIAN_POINT('',(7.396961550602,-2.69,0.684729635533));+#16938=LINE('',#16931,#13094);+#16939=ORIENTED_EDGE('',*,*,#16940,.T.);+#16940=EDGE_CURVE('',#16936,#8105,#16941,.T.);+#16941=CIRCLE('',#16942,0.2);+#16942=AXIS2_PLACEMENT_3D('',#16900,#1569,#13100);+#16943=PLANE('',#16944);+#16944=AXIS2_PLACEMENT_3D('',#16945,#1569,#13);+#16945=CARTESIAN_POINT('',(7.414276639233,-2.69,0.410238158856));+#16946=ADVANCED_FACE('',(#16947),#16954,.T.);+#16947=FACE_BOUND('',#16948,.F.);+#16948=EDGE_LOOP('',(#16949,#16939,#16952,#16953));+#16949=ORIENTED_EDGE('',*,*,#16950,.T.);+#16950=EDGE_CURVE('',#16870,#16936,#16951,.T.);+#16951=LINE('',#16871,#1568);+#16952=ORIENTED_EDGE('',*,*,#8104,.F.);+#16953=ORIENTED_EDGE('',*,*,#16874,.F.);+#16954=CYLINDRICAL_SURFACE('',#16955,0.2);+#16955=AXIS2_PLACEMENT_3D('',#16834,#422,#13100);+#16956=ADVANCED_FACE('',(#16957),#7271,.F.);+#16957=FACE_BOUND('',#16958,.F.);+#16958=EDGE_LOOP('',(#16884,#16959,#16960,#16964));+#16959=ORIENTED_EDGE('',*,*,#13270,.T.);+#16960=ORIENTED_EDGE('',*,*,#16961,.T.);+#16961=EDGE_CURVE('',#13267,#8125,#16962,.T.);+#16962=LINE('',#16963,#2043);+#16963=CARTESIAN_POINT('',(7.,-2.91,0.630119079428));+#16964=ORIENTED_EDGE('',*,*,#8124,.F.);+#16965=ADVANCED_FACE('',(#16966),#17025,.F.);+#16966=FACE_BOUND('',#16967,.F.);+#16967=EDGE_LOOP('',(#16968,#16969,#16975,#16982,#16987,#16994,#16999,#17004,#17009,#17015,#17020,#17024));+#16968=ORIENTED_EDGE('',*,*,#16961,.F.);+#16969=ORIENTED_EDGE('',*,*,#16970,.T.);+#16970=EDGE_CURVE('',#13267,#16971,#16973,.T.);+#16971=VERTEX_POINT('',#16972);+#16972=CARTESIAN_POINT('',(7.2,-2.91,0.75));+#16973=LINE('',#16974,#49);+#16974=CARTESIAN_POINT('',(6.85,-2.91,0.75));+#16975=ORIENTED_EDGE('',*,*,#16976,.T.);+#16976=EDGE_CURVE('',#16971,#16977,#16979,.T.);+#16977=VERTEX_POINT('',#16978);+#16978=CARTESIAN_POINT('',(7.298480775301,-2.91,0.667364817767));+#16979=CIRCLE('',#16980,0.1);+#16980=AXIS2_PLACEMENT_3D('',#16981,#422,#13051);+#16981=CARTESIAN_POINT('',(7.2,-2.91,0.65));+#16982=ORIENTED_EDGE('',*,*,#16983,.T.);+#16983=EDGE_CURVE('',#16977,#16984,#16986,.T.);+#16984=VERTEX_POINT('',#16985);+#16985=CARTESIAN_POINT('',(7.382385590716,-2.91,0.165270364467));+#16986=LINE('',#16978,#13057);+#16987=ORIENTED_EDGE('',*,*,#16988,.T.);+#16988=EDGE_CURVE('',#16984,#16989,#16991,.T.);+#16989=VERTEX_POINT('',#16990);+#16990=CARTESIAN_POINT('',(7.579347141319,-2.91,1.387778780781E-16));+#16991=CIRCLE('',#16992,0.2);+#16992=AXIS2_PLACEMENT_3D('',#16993,#1569,#13066);+#16993=CARTESIAN_POINT('',(7.579347141319,-2.91,0.2));+#16994=ORIENTED_EDGE('',*,*,#16995,.T.);+#16995=EDGE_CURVE('',#16989,#16996,#16998,.T.);+#16996=VERTEX_POINT('',#16997);+#16997=CARTESIAN_POINT('',(8.,-2.91,1.387778780781E-16));+#16998=LINE('',#16990,#49);+#16999=ORIENTED_EDGE('',*,*,#17000,.T.);+#17000=EDGE_CURVE('',#16996,#17001,#17003,.T.);+#17001=VERTEX_POINT('',#17002);+#17002=CARTESIAN_POINT('',(8.,-2.91,0.1));+#17003=LINE('',#16997,#2043);+#17004=ORIENTED_EDGE('',*,*,#17005,.T.);+#17005=EDGE_CURVE('',#17001,#17006,#17008,.T.);+#17006=VERTEX_POINT('',#17007);+#17007=CARTESIAN_POINT('',(7.579347141319,-2.91,0.1));+#17008=LINE('',#17002,#1576);+#17009=ORIENTED_EDGE('',*,*,#17010,.T.);+#17010=EDGE_CURVE('',#17006,#17011,#17013,.T.);+#17011=VERTEX_POINT('',#17012);+#17012=CARTESIAN_POINT('',(7.480866366018,-2.91,0.182635182233));+#17013=CIRCLE('',#17014,1.E-01);+#17014=AXIS2_PLACEMENT_3D('',#16993,#422,#13088);+#17015=ORIENTED_EDGE('',*,*,#17016,.T.);+#17016=EDGE_CURVE('',#17011,#17017,#17019,.T.);+#17017=VERTEX_POINT('',#17018);+#17018=CARTESIAN_POINT('',(7.396961550602,-2.91,0.684729635533));+#17019=LINE('',#17012,#13094);+#17020=ORIENTED_EDGE('',*,*,#17021,.T.);+#17021=EDGE_CURVE('',#17017,#8137,#17022,.T.);+#17022=CIRCLE('',#17023,0.2);+#17023=AXIS2_PLACEMENT_3D('',#16981,#1569,#13100);+#17024=ORIENTED_EDGE('',*,*,#8136,.T.);+#17025=PLANE('',#17026);+#17026=AXIS2_PLACEMENT_3D('',#17027,#1569,#13);+#17027=CARTESIAN_POINT('',(7.414276639233,-2.91,0.410238158856));+#17028=ADVANCED_FACE('',(#17029),#17090,.T.);+#17029=FACE_BOUND('',#17030,.T.);+#17030=EDGE_LOOP('',(#17031,#17035,#17041,#17048,#17053,#17060,#17065,#17070,#17075,#17081,#17086,#8143));+#17031=ORIENTED_EDGE('',*,*,#17032,.F.);+#17032=EDGE_CURVE('',#13263,#8145,#17033,.T.);+#17033=LINE('',#17034,#2043);+#17034=CARTESIAN_POINT('',(7.,-3.09,0.630119079428));+#17035=ORIENTED_EDGE('',*,*,#17036,.T.);+#17036=EDGE_CURVE('',#13263,#17037,#17039,.T.);+#17037=VERTEX_POINT('',#17038);+#17038=CARTESIAN_POINT('',(7.2,-3.09,0.75));+#17039=LINE('',#17040,#49);+#17040=CARTESIAN_POINT('',(6.85,-3.09,0.75));+#17041=ORIENTED_EDGE('',*,*,#17042,.T.);+#17042=EDGE_CURVE('',#17037,#17043,#17045,.T.);+#17043=VERTEX_POINT('',#17044);+#17044=CARTESIAN_POINT('',(7.298480775301,-3.09,0.667364817767));+#17045=CIRCLE('',#17046,0.1);+#17046=AXIS2_PLACEMENT_3D('',#17047,#422,#13051);+#17047=CARTESIAN_POINT('',(7.2,-3.09,0.65));+#17048=ORIENTED_EDGE('',*,*,#17049,.T.);+#17049=EDGE_CURVE('',#17043,#17050,#17052,.T.);+#17050=VERTEX_POINT('',#17051);+#17051=CARTESIAN_POINT('',(7.382385590716,-3.09,0.165270364467));+#17052=LINE('',#17044,#13057);+#17053=ORIENTED_EDGE('',*,*,#17054,.T.);+#17054=EDGE_CURVE('',#17050,#17055,#17057,.T.);+#17055=VERTEX_POINT('',#17056);+#17056=CARTESIAN_POINT('',(7.579347141319,-3.09,1.387778780781E-16));+#17057=CIRCLE('',#17058,0.2);+#17058=AXIS2_PLACEMENT_3D('',#17059,#1569,#13066);+#17059=CARTESIAN_POINT('',(7.579347141319,-3.09,0.2));+#17060=ORIENTED_EDGE('',*,*,#17061,.T.);+#17061=EDGE_CURVE('',#17055,#17062,#17064,.T.);+#17062=VERTEX_POINT('',#17063);+#17063=CARTESIAN_POINT('',(8.,-3.09,1.387778780781E-16));+#17064=LINE('',#17056,#49);+#17065=ORIENTED_EDGE('',*,*,#17066,.T.);+#17066=EDGE_CURVE('',#17062,#17067,#17069,.T.);+#17067=VERTEX_POINT('',#17068);+#17068=CARTESIAN_POINT('',(8.,-3.09,0.1));+#17069=LINE('',#17063,#2043);+#17070=ORIENTED_EDGE('',*,*,#17071,.T.);+#17071=EDGE_CURVE('',#17067,#17072,#17074,.T.);+#17072=VERTEX_POINT('',#17073);+#17073=CARTESIAN_POINT('',(7.579347141319,-3.09,0.1));+#17074=LINE('',#17068,#1576);+#17075=ORIENTED_EDGE('',*,*,#17076,.T.);+#17076=EDGE_CURVE('',#17072,#17077,#17079,.T.);+#17077=VERTEX_POINT('',#17078);+#17078=CARTESIAN_POINT('',(7.480866366018,-3.09,0.182635182233));+#17079=CIRCLE('',#17080,1.E-01);+#17080=AXIS2_PLACEMENT_3D('',#17059,#422,#13088);+#17081=ORIENTED_EDGE('',*,*,#17082,.T.);+#17082=EDGE_CURVE('',#17077,#17083,#17085,.T.);+#17083=VERTEX_POINT('',#17084);+#17084=CARTESIAN_POINT('',(7.396961550602,-3.09,0.684729635533));+#17085=LINE('',#17078,#13094);+#17086=ORIENTED_EDGE('',*,*,#17087,.T.);+#17087=EDGE_CURVE('',#17083,#8140,#17088,.T.);+#17088=CIRCLE('',#17089,0.2);+#17089=AXIS2_PLACEMENT_3D('',#17047,#1569,#13100);+#17090=PLANE('',#17091);+#17091=AXIS2_PLACEMENT_3D('',#17092,#1569,#13);+#17092=CARTESIAN_POINT('',(7.414276639233,-3.09,0.410238158856));+#17093=ADVANCED_FACE('',(#17094),#17101,.T.);+#17094=FACE_BOUND('',#17095,.F.);+#17095=EDGE_LOOP('',(#17096,#17086,#17099,#17100));+#17096=ORIENTED_EDGE('',*,*,#17097,.T.);+#17097=EDGE_CURVE('',#17017,#17083,#17098,.T.);+#17098=LINE('',#17018,#1568);+#17099=ORIENTED_EDGE('',*,*,#8139,.F.);+#17100=ORIENTED_EDGE('',*,*,#17021,.F.);+#17101=CYLINDRICAL_SURFACE('',#17102,0.2);+#17102=AXIS2_PLACEMENT_3D('',#16981,#422,#13100);+#17103=ADVANCED_FACE('',(#17104),#7271,.F.);+#17104=FACE_BOUND('',#17105,.F.);+#17105=EDGE_LOOP('',(#17031,#17106,#17107,#17111));+#17106=ORIENTED_EDGE('',*,*,#13262,.T.);+#17107=ORIENTED_EDGE('',*,*,#17108,.T.);+#17108=EDGE_CURVE('',#13259,#8160,#17109,.T.);+#17109=LINE('',#17110,#2043);+#17110=CARTESIAN_POINT('',(7.,-3.31,0.630119079428));+#17111=ORIENTED_EDGE('',*,*,#8159,.F.);+#17112=ADVANCED_FACE('',(#17113),#17172,.F.);+#17113=FACE_BOUND('',#17114,.F.);+#17114=EDGE_LOOP('',(#17115,#17116,#17122,#17129,#17134,#17141,#17146,#17151,#17156,#17162,#17167,#17171));+#17115=ORIENTED_EDGE('',*,*,#17108,.F.);+#17116=ORIENTED_EDGE('',*,*,#17117,.T.);+#17117=EDGE_CURVE('',#13259,#17118,#17120,.T.);+#17118=VERTEX_POINT('',#17119);+#17119=CARTESIAN_POINT('',(7.2,-3.31,0.75));+#17120=LINE('',#17121,#49);+#17121=CARTESIAN_POINT('',(6.85,-3.31,0.75));+#17122=ORIENTED_EDGE('',*,*,#17123,.T.);+#17123=EDGE_CURVE('',#17118,#17124,#17126,.T.);+#17124=VERTEX_POINT('',#17125);+#17125=CARTESIAN_POINT('',(7.298480775301,-3.31,0.667364817767));+#17126=CIRCLE('',#17127,0.1);+#17127=AXIS2_PLACEMENT_3D('',#17128,#422,#13051);+#17128=CARTESIAN_POINT('',(7.2,-3.31,0.65));+#17129=ORIENTED_EDGE('',*,*,#17130,.T.);+#17130=EDGE_CURVE('',#17124,#17131,#17133,.T.);+#17131=VERTEX_POINT('',#17132);+#17132=CARTESIAN_POINT('',(7.382385590716,-3.31,0.165270364467));+#17133=LINE('',#17125,#13057);+#17134=ORIENTED_EDGE('',*,*,#17135,.T.);+#17135=EDGE_CURVE('',#17131,#17136,#17138,.T.);+#17136=VERTEX_POINT('',#17137);+#17137=CARTESIAN_POINT('',(7.579347141319,-3.31,1.387778780781E-16));+#17138=CIRCLE('',#17139,0.2);+#17139=AXIS2_PLACEMENT_3D('',#17140,#1569,#13066);+#17140=CARTESIAN_POINT('',(7.579347141319,-3.31,0.2));+#17141=ORIENTED_EDGE('',*,*,#17142,.T.);+#17142=EDGE_CURVE('',#17136,#17143,#17145,.T.);+#17143=VERTEX_POINT('',#17144);+#17144=CARTESIAN_POINT('',(8.,-3.31,1.387778780781E-16));+#17145=LINE('',#17137,#49);+#17146=ORIENTED_EDGE('',*,*,#17147,.T.);+#17147=EDGE_CURVE('',#17143,#17148,#17150,.T.);+#17148=VERTEX_POINT('',#17149);+#17149=CARTESIAN_POINT('',(8.,-3.31,0.1));+#17150=LINE('',#17144,#2043);+#17151=ORIENTED_EDGE('',*,*,#17152,.T.);+#17152=EDGE_CURVE('',#17148,#17153,#17155,.T.);+#17153=VERTEX_POINT('',#17154);+#17154=CARTESIAN_POINT('',(7.579347141319,-3.31,0.1));+#17155=LINE('',#17149,#1576);+#17156=ORIENTED_EDGE('',*,*,#17157,.T.);+#17157=EDGE_CURVE('',#17153,#17158,#17160,.T.);+#17158=VERTEX_POINT('',#17159);+#17159=CARTESIAN_POINT('',(7.480866366018,-3.31,0.182635182233));+#17160=CIRCLE('',#17161,1.E-01);+#17161=AXIS2_PLACEMENT_3D('',#17140,#422,#13088);+#17162=ORIENTED_EDGE('',*,*,#17163,.T.);+#17163=EDGE_CURVE('',#17158,#17164,#17166,.T.);+#17164=VERTEX_POINT('',#17165);+#17165=CARTESIAN_POINT('',(7.396961550602,-3.31,0.684729635533));+#17166=LINE('',#17159,#13094);+#17167=ORIENTED_EDGE('',*,*,#17168,.T.);+#17168=EDGE_CURVE('',#17164,#8172,#17169,.T.);+#17169=CIRCLE('',#17170,0.2);+#17170=AXIS2_PLACEMENT_3D('',#17128,#1569,#13100);+#17171=ORIENTED_EDGE('',*,*,#8171,.T.);+#17172=PLANE('',#17173);+#17173=AXIS2_PLACEMENT_3D('',#17174,#1569,#13);+#17174=CARTESIAN_POINT('',(7.414276639233,-3.31,0.410238158856));+#17175=ADVANCED_FACE('',(#17176),#17237,.T.);+#17176=FACE_BOUND('',#17177,.T.);+#17177=EDGE_LOOP('',(#17178,#17182,#17188,#17195,#17200,#17207,#17212,#17217,#17222,#17228,#17233,#8178));+#17178=ORIENTED_EDGE('',*,*,#17179,.F.);+#17179=EDGE_CURVE('',#13255,#8180,#17180,.T.);+#17180=LINE('',#17181,#2043);+#17181=CARTESIAN_POINT('',(7.,-3.49,0.630119079428));+#17182=ORIENTED_EDGE('',*,*,#17183,.T.);+#17183=EDGE_CURVE('',#13255,#17184,#17186,.T.);+#17184=VERTEX_POINT('',#17185);+#17185=CARTESIAN_POINT('',(7.2,-3.49,0.75));+#17186=LINE('',#17187,#49);+#17187=CARTESIAN_POINT('',(6.85,-3.49,0.75));+#17188=ORIENTED_EDGE('',*,*,#17189,.T.);+#17189=EDGE_CURVE('',#17184,#17190,#17192,.T.);+#17190=VERTEX_POINT('',#17191);+#17191=CARTESIAN_POINT('',(7.298480775301,-3.49,0.667364817767));+#17192=CIRCLE('',#17193,0.1);+#17193=AXIS2_PLACEMENT_3D('',#17194,#422,#13051);+#17194=CARTESIAN_POINT('',(7.2,-3.49,0.65));+#17195=ORIENTED_EDGE('',*,*,#17196,.T.);+#17196=EDGE_CURVE('',#17190,#17197,#17199,.T.);+#17197=VERTEX_POINT('',#17198);+#17198=CARTESIAN_POINT('',(7.382385590716,-3.49,0.165270364467));+#17199=LINE('',#17191,#13057);+#17200=ORIENTED_EDGE('',*,*,#17201,.T.);+#17201=EDGE_CURVE('',#17197,#17202,#17204,.T.);+#17202=VERTEX_POINT('',#17203);+#17203=CARTESIAN_POINT('',(7.579347141319,-3.49,1.387778780781E-16));+#17204=CIRCLE('',#17205,0.2);+#17205=AXIS2_PLACEMENT_3D('',#17206,#1569,#13066);+#17206=CARTESIAN_POINT('',(7.579347141319,-3.49,0.2));+#17207=ORIENTED_EDGE('',*,*,#17208,.T.);+#17208=EDGE_CURVE('',#17202,#17209,#17211,.T.);+#17209=VERTEX_POINT('',#17210);+#17210=CARTESIAN_POINT('',(8.,-3.49,1.387778780781E-16));+#17211=LINE('',#17203,#49);+#17212=ORIENTED_EDGE('',*,*,#17213,.T.);+#17213=EDGE_CURVE('',#17209,#17214,#17216,.T.);+#17214=VERTEX_POINT('',#17215);+#17215=CARTESIAN_POINT('',(8.,-3.49,0.1));+#17216=LINE('',#17210,#2043);+#17217=ORIENTED_EDGE('',*,*,#17218,.T.);+#17218=EDGE_CURVE('',#17214,#17219,#17221,.T.);+#17219=VERTEX_POINT('',#17220);+#17220=CARTESIAN_POINT('',(7.579347141319,-3.49,0.1));+#17221=LINE('',#17215,#1576);+#17222=ORIENTED_EDGE('',*,*,#17223,.T.);+#17223=EDGE_CURVE('',#17219,#17224,#17226,.T.);+#17224=VERTEX_POINT('',#17225);+#17225=CARTESIAN_POINT('',(7.480866366018,-3.49,0.182635182233));+#17226=CIRCLE('',#17227,1.E-01);+#17227=AXIS2_PLACEMENT_3D('',#17206,#422,#13088);+#17228=ORIENTED_EDGE('',*,*,#17229,.T.);+#17229=EDGE_CURVE('',#17224,#17230,#17232,.T.);+#17230=VERTEX_POINT('',#17231);+#17231=CARTESIAN_POINT('',(7.396961550602,-3.49,0.684729635533));+#17232=LINE('',#17225,#13094);+#17233=ORIENTED_EDGE('',*,*,#17234,.T.);+#17234=EDGE_CURVE('',#17230,#8175,#17235,.T.);+#17235=CIRCLE('',#17236,0.2);+#17236=AXIS2_PLACEMENT_3D('',#17194,#1569,#13100);+#17237=PLANE('',#17238);+#17238=AXIS2_PLACEMENT_3D('',#17239,#1569,#13);+#17239=CARTESIAN_POINT('',(7.414276639233,-3.49,0.410238158856));+#17240=ADVANCED_FACE('',(#17241),#17248,.T.);+#17241=FACE_BOUND('',#17242,.F.);+#17242=EDGE_LOOP('',(#17243,#17233,#17246,#17247));+#17243=ORIENTED_EDGE('',*,*,#17244,.T.);+#17244=EDGE_CURVE('',#17164,#17230,#17245,.T.);+#17245=LINE('',#17165,#1568);+#17246=ORIENTED_EDGE('',*,*,#8174,.F.);+#17247=ORIENTED_EDGE('',*,*,#17168,.F.);+#17248=CYLINDRICAL_SURFACE('',#17249,0.2);+#17249=AXIS2_PLACEMENT_3D('',#17128,#422,#13100);+#17250=ADVANCED_FACE('',(#17251),#7271,.F.);+#17251=FACE_BOUND('',#17252,.F.);+#17252=EDGE_LOOP('',(#17178,#17253,#17254,#17258));+#17253=ORIENTED_EDGE('',*,*,#13254,.T.);+#17254=ORIENTED_EDGE('',*,*,#17255,.T.);+#17255=EDGE_CURVE('',#13251,#8195,#17256,.T.);+#17256=LINE('',#17257,#2043);+#17257=CARTESIAN_POINT('',(7.,-3.71,0.630119079428));+#17258=ORIENTED_EDGE('',*,*,#8194,.F.);+#17259=ADVANCED_FACE('',(#17260),#17319,.F.);+#17260=FACE_BOUND('',#17261,.F.);+#17261=EDGE_LOOP('',(#17262,#17263,#17269,#17276,#17281,#17288,#17293,#17298,#17303,#17309,#17314,#17318));+#17262=ORIENTED_EDGE('',*,*,#17255,.F.);+#17263=ORIENTED_EDGE('',*,*,#17264,.T.);+#17264=EDGE_CURVE('',#13251,#17265,#17267,.T.);+#17265=VERTEX_POINT('',#17266);+#17266=CARTESIAN_POINT('',(7.2,-3.71,0.75));+#17267=LINE('',#17268,#49);+#17268=CARTESIAN_POINT('',(6.85,-3.71,0.75));+#17269=ORIENTED_EDGE('',*,*,#17270,.T.);+#17270=EDGE_CURVE('',#17265,#17271,#17273,.T.);+#17271=VERTEX_POINT('',#17272);+#17272=CARTESIAN_POINT('',(7.298480775301,-3.71,0.667364817767));+#17273=CIRCLE('',#17274,0.1);+#17274=AXIS2_PLACEMENT_3D('',#17275,#422,#13051);+#17275=CARTESIAN_POINT('',(7.2,-3.71,0.65));+#17276=ORIENTED_EDGE('',*,*,#17277,.T.);+#17277=EDGE_CURVE('',#17271,#17278,#17280,.T.);+#17278=VERTEX_POINT('',#17279);+#17279=CARTESIAN_POINT('',(7.382385590716,-3.71,0.165270364467));+#17280=LINE('',#17272,#13057);+#17281=ORIENTED_EDGE('',*,*,#17282,.T.);+#17282=EDGE_CURVE('',#17278,#17283,#17285,.T.);+#17283=VERTEX_POINT('',#17284);+#17284=CARTESIAN_POINT('',(7.579347141319,-3.71,1.387778780781E-16));+#17285=CIRCLE('',#17286,0.2);+#17286=AXIS2_PLACEMENT_3D('',#17287,#1569,#13066);+#17287=CARTESIAN_POINT('',(7.579347141319,-3.71,0.2));+#17288=ORIENTED_EDGE('',*,*,#17289,.T.);+#17289=EDGE_CURVE('',#17283,#17290,#17292,.T.);+#17290=VERTEX_POINT('',#17291);+#17291=CARTESIAN_POINT('',(8.,-3.71,1.387778780781E-16));+#17292=LINE('',#17284,#49);+#17293=ORIENTED_EDGE('',*,*,#17294,.T.);+#17294=EDGE_CURVE('',#17290,#17295,#17297,.T.);+#17295=VERTEX_POINT('',#17296);+#17296=CARTESIAN_POINT('',(8.,-3.71,0.1));+#17297=LINE('',#17291,#2043);+#17298=ORIENTED_EDGE('',*,*,#17299,.T.);+#17299=EDGE_CURVE('',#17295,#17300,#17302,.T.);+#17300=VERTEX_POINT('',#17301);+#17301=CARTESIAN_POINT('',(7.579347141319,-3.71,0.1));+#17302=LINE('',#17296,#1576);+#17303=ORIENTED_EDGE('',*,*,#17304,.T.);+#17304=EDGE_CURVE('',#17300,#17305,#17307,.T.);+#17305=VERTEX_POINT('',#17306);+#17306=CARTESIAN_POINT('',(7.480866366018,-3.71,0.182635182233));+#17307=CIRCLE('',#17308,1.E-01);+#17308=AXIS2_PLACEMENT_3D('',#17287,#422,#13088);+#17309=ORIENTED_EDGE('',*,*,#17310,.T.);+#17310=EDGE_CURVE('',#17305,#17311,#17313,.T.);+#17311=VERTEX_POINT('',#17312);+#17312=CARTESIAN_POINT('',(7.396961550602,-3.71,0.684729635533));+#17313=LINE('',#17306,#13094);+#17314=ORIENTED_EDGE('',*,*,#17315,.T.);+#17315=EDGE_CURVE('',#17311,#8207,#17316,.T.);+#17316=CIRCLE('',#17317,0.2);+#17317=AXIS2_PLACEMENT_3D('',#17275,#1569,#13100);+#17318=ORIENTED_EDGE('',*,*,#8206,.T.);+#17319=PLANE('',#17320);+#17320=AXIS2_PLACEMENT_3D('',#17321,#1569,#13);+#17321=CARTESIAN_POINT('',(7.414276639233,-3.71,0.410238158856));+#17322=ADVANCED_FACE('',(#17323),#17384,.T.);+#17323=FACE_BOUND('',#17324,.T.);+#17324=EDGE_LOOP('',(#17325,#17329,#17335,#17342,#17347,#17354,#17359,#17364,#17369,#17375,#17380,#8213));+#17325=ORIENTED_EDGE('',*,*,#17326,.F.);+#17326=EDGE_CURVE('',#13247,#8215,#17327,.T.);+#17327=LINE('',#17328,#2043);+#17328=CARTESIAN_POINT('',(7.,-3.89,0.630119079428));+#17329=ORIENTED_EDGE('',*,*,#17330,.T.);+#17330=EDGE_CURVE('',#13247,#17331,#17333,.T.);+#17331=VERTEX_POINT('',#17332);+#17332=CARTESIAN_POINT('',(7.2,-3.89,0.75));+#17333=LINE('',#17334,#49);+#17334=CARTESIAN_POINT('',(6.85,-3.89,0.75));+#17335=ORIENTED_EDGE('',*,*,#17336,.T.);+#17336=EDGE_CURVE('',#17331,#17337,#17339,.T.);+#17337=VERTEX_POINT('',#17338);+#17338=CARTESIAN_POINT('',(7.298480775301,-3.89,0.667364817767));+#17339=CIRCLE('',#17340,0.1);+#17340=AXIS2_PLACEMENT_3D('',#17341,#422,#13051);+#17341=CARTESIAN_POINT('',(7.2,-3.89,0.65));+#17342=ORIENTED_EDGE('',*,*,#17343,.T.);+#17343=EDGE_CURVE('',#17337,#17344,#17346,.T.);+#17344=VERTEX_POINT('',#17345);+#17345=CARTESIAN_POINT('',(7.382385590716,-3.89,0.165270364467));+#17346=LINE('',#17338,#13057);+#17347=ORIENTED_EDGE('',*,*,#17348,.T.);+#17348=EDGE_CURVE('',#17344,#17349,#17351,.T.);+#17349=VERTEX_POINT('',#17350);+#17350=CARTESIAN_POINT('',(7.579347141319,-3.89,1.387778780781E-16));+#17351=CIRCLE('',#17352,0.2);+#17352=AXIS2_PLACEMENT_3D('',#17353,#1569,#13066);+#17353=CARTESIAN_POINT('',(7.579347141319,-3.89,0.2));+#17354=ORIENTED_EDGE('',*,*,#17355,.T.);+#17355=EDGE_CURVE('',#17349,#17356,#17358,.T.);+#17356=VERTEX_POINT('',#17357);+#17357=CARTESIAN_POINT('',(8.,-3.89,1.387778780781E-16));+#17358=LINE('',#17350,#49);+#17359=ORIENTED_EDGE('',*,*,#17360,.T.);+#17360=EDGE_CURVE('',#17356,#17361,#17363,.T.);+#17361=VERTEX_POINT('',#17362);+#17362=CARTESIAN_POINT('',(8.,-3.89,0.1));+#17363=LINE('',#17357,#2043);+#17364=ORIENTED_EDGE('',*,*,#17365,.T.);+#17365=EDGE_CURVE('',#17361,#17366,#17368,.T.);+#17366=VERTEX_POINT('',#17367);+#17367=CARTESIAN_POINT('',(7.579347141319,-3.89,0.1));+#17368=LINE('',#17362,#1576);+#17369=ORIENTED_EDGE('',*,*,#17370,.T.);+#17370=EDGE_CURVE('',#17366,#17371,#17373,.T.);+#17371=VERTEX_POINT('',#17372);+#17372=CARTESIAN_POINT('',(7.480866366018,-3.89,0.182635182233));+#17373=CIRCLE('',#17374,1.E-01);+#17374=AXIS2_PLACEMENT_3D('',#17353,#422,#13088);+#17375=ORIENTED_EDGE('',*,*,#17376,.T.);+#17376=EDGE_CURVE('',#17371,#17377,#17379,.T.);+#17377=VERTEX_POINT('',#17378);+#17378=CARTESIAN_POINT('',(7.396961550602,-3.89,0.684729635533));+#17379=LINE('',#17372,#13094);+#17380=ORIENTED_EDGE('',*,*,#17381,.T.);+#17381=EDGE_CURVE('',#17377,#8210,#17382,.T.);+#17382=CIRCLE('',#17383,0.2);+#17383=AXIS2_PLACEMENT_3D('',#17341,#1569,#13100);+#17384=PLANE('',#17385);+#17385=AXIS2_PLACEMENT_3D('',#17386,#1569,#13);+#17386=CARTESIAN_POINT('',(7.414276639233,-3.89,0.410238158856));+#17387=ADVANCED_FACE('',(#17388),#17395,.T.);+#17388=FACE_BOUND('',#17389,.F.);+#17389=EDGE_LOOP('',(#17390,#17380,#17393,#17394));+#17390=ORIENTED_EDGE('',*,*,#17391,.T.);+#17391=EDGE_CURVE('',#17311,#17377,#17392,.T.);+#17392=LINE('',#17312,#1568);+#17393=ORIENTED_EDGE('',*,*,#8209,.F.);+#17394=ORIENTED_EDGE('',*,*,#17315,.F.);+#17395=CYLINDRICAL_SURFACE('',#17396,0.2);+#17396=AXIS2_PLACEMENT_3D('',#17275,#422,#13100);+#17397=ADVANCED_FACE('',(#17398),#7271,.F.);+#17398=FACE_BOUND('',#17399,.F.);+#17399=EDGE_LOOP('',(#17325,#17400,#17401,#17405));+#17400=ORIENTED_EDGE('',*,*,#13246,.T.);+#17401=ORIENTED_EDGE('',*,*,#17402,.T.);+#17402=EDGE_CURVE('',#13243,#8230,#17403,.T.);+#17403=LINE('',#17404,#2043);+#17404=CARTESIAN_POINT('',(7.,-4.11,0.630119079428));+#17405=ORIENTED_EDGE('',*,*,#8229,.F.);+#17406=ADVANCED_FACE('',(#17407),#17466,.F.);+#17407=FACE_BOUND('',#17408,.F.);+#17408=EDGE_LOOP('',(#17409,#17410,#17416,#17423,#17428,#17435,#17440,#17445,#17450,#17456,#17461,#17465));+#17409=ORIENTED_EDGE('',*,*,#17402,.F.);+#17410=ORIENTED_EDGE('',*,*,#17411,.T.);+#17411=EDGE_CURVE('',#13243,#17412,#17414,.T.);+#17412=VERTEX_POINT('',#17413);+#17413=CARTESIAN_POINT('',(7.2,-4.11,0.75));+#17414=LINE('',#17415,#49);+#17415=CARTESIAN_POINT('',(6.85,-4.11,0.75));+#17416=ORIENTED_EDGE('',*,*,#17417,.T.);+#17417=EDGE_CURVE('',#17412,#17418,#17420,.T.);+#17418=VERTEX_POINT('',#17419);+#17419=CARTESIAN_POINT('',(7.298480775301,-4.11,0.667364817767));+#17420=CIRCLE('',#17421,0.1);+#17421=AXIS2_PLACEMENT_3D('',#17422,#422,#13051);+#17422=CARTESIAN_POINT('',(7.2,-4.11,0.65));+#17423=ORIENTED_EDGE('',*,*,#17424,.T.);+#17424=EDGE_CURVE('',#17418,#17425,#17427,.T.);+#17425=VERTEX_POINT('',#17426);+#17426=CARTESIAN_POINT('',(7.382385590716,-4.11,0.165270364467));+#17427=LINE('',#17419,#13057);+#17428=ORIENTED_EDGE('',*,*,#17429,.T.);+#17429=EDGE_CURVE('',#17425,#17430,#17432,.T.);+#17430=VERTEX_POINT('',#17431);+#17431=CARTESIAN_POINT('',(7.579347141319,-4.11,1.387778780781E-16));+#17432=CIRCLE('',#17433,0.2);+#17433=AXIS2_PLACEMENT_3D('',#17434,#1569,#13066);+#17434=CARTESIAN_POINT('',(7.579347141319,-4.11,0.2));+#17435=ORIENTED_EDGE('',*,*,#17436,.T.);+#17436=EDGE_CURVE('',#17430,#17437,#17439,.T.);+#17437=VERTEX_POINT('',#17438);+#17438=CARTESIAN_POINT('',(8.,-4.11,1.387778780781E-16));+#17439=LINE('',#17431,#49);+#17440=ORIENTED_EDGE('',*,*,#17441,.T.);+#17441=EDGE_CURVE('',#17437,#17442,#17444,.T.);+#17442=VERTEX_POINT('',#17443);+#17443=CARTESIAN_POINT('',(8.,-4.11,0.1));+#17444=LINE('',#17438,#2043);+#17445=ORIENTED_EDGE('',*,*,#17446,.T.);+#17446=EDGE_CURVE('',#17442,#17447,#17449,.T.);+#17447=VERTEX_POINT('',#17448);+#17448=CARTESIAN_POINT('',(7.579347141319,-4.11,0.1));+#17449=LINE('',#17443,#1576);+#17450=ORIENTED_EDGE('',*,*,#17451,.T.);+#17451=EDGE_CURVE('',#17447,#17452,#17454,.T.);+#17452=VERTEX_POINT('',#17453);+#17453=CARTESIAN_POINT('',(7.480866366018,-4.11,0.182635182233));+#17454=CIRCLE('',#17455,1.E-01);+#17455=AXIS2_PLACEMENT_3D('',#17434,#422,#13088);+#17456=ORIENTED_EDGE('',*,*,#17457,.T.);+#17457=EDGE_CURVE('',#17452,#17458,#17460,.T.);+#17458=VERTEX_POINT('',#17459);+#17459=CARTESIAN_POINT('',(7.396961550602,-4.11,0.684729635533));+#17460=LINE('',#17453,#13094);+#17461=ORIENTED_EDGE('',*,*,#17462,.T.);+#17462=EDGE_CURVE('',#17458,#8242,#17463,.T.);+#17463=CIRCLE('',#17464,0.2);+#17464=AXIS2_PLACEMENT_3D('',#17422,#1569,#13100);+#17465=ORIENTED_EDGE('',*,*,#8241,.T.);+#17466=PLANE('',#17467);+#17467=AXIS2_PLACEMENT_3D('',#17468,#1569,#13);+#17468=CARTESIAN_POINT('',(7.414276639233,-4.11,0.410238158856));+#17469=ADVANCED_FACE('',(#17470),#17531,.T.);+#17470=FACE_BOUND('',#17471,.T.);+#17471=EDGE_LOOP('',(#17472,#17476,#17482,#17489,#17494,#17501,#17506,#17511,#17516,#17522,#17527,#8248));+#17472=ORIENTED_EDGE('',*,*,#17473,.F.);+#17473=EDGE_CURVE('',#13239,#8250,#17474,.T.);+#17474=LINE('',#17475,#2043);+#17475=CARTESIAN_POINT('',(7.,-4.29,0.630119079428));+#17476=ORIENTED_EDGE('',*,*,#17477,.T.);+#17477=EDGE_CURVE('',#13239,#17478,#17480,.T.);+#17478=VERTEX_POINT('',#17479);+#17479=CARTESIAN_POINT('',(7.2,-4.29,0.75));+#17480=LINE('',#17481,#49);+#17481=CARTESIAN_POINT('',(6.85,-4.29,0.75));+#17482=ORIENTED_EDGE('',*,*,#17483,.T.);+#17483=EDGE_CURVE('',#17478,#17484,#17486,.T.);+#17484=VERTEX_POINT('',#17485);+#17485=CARTESIAN_POINT('',(7.298480775301,-4.29,0.667364817767));+#17486=CIRCLE('',#17487,0.1);+#17487=AXIS2_PLACEMENT_3D('',#17488,#422,#13051);+#17488=CARTESIAN_POINT('',(7.2,-4.29,0.65));+#17489=ORIENTED_EDGE('',*,*,#17490,.T.);+#17490=EDGE_CURVE('',#17484,#17491,#17493,.T.);+#17491=VERTEX_POINT('',#17492);+#17492=CARTESIAN_POINT('',(7.382385590716,-4.29,0.165270364467));+#17493=LINE('',#17485,#13057);+#17494=ORIENTED_EDGE('',*,*,#17495,.T.);+#17495=EDGE_CURVE('',#17491,#17496,#17498,.T.);+#17496=VERTEX_POINT('',#17497);+#17497=CARTESIAN_POINT('',(7.579347141319,-4.29,1.387778780781E-16));+#17498=CIRCLE('',#17499,0.2);+#17499=AXIS2_PLACEMENT_3D('',#17500,#1569,#13066);+#17500=CARTESIAN_POINT('',(7.579347141319,-4.29,0.2));+#17501=ORIENTED_EDGE('',*,*,#17502,.T.);+#17502=EDGE_CURVE('',#17496,#17503,#17505,.T.);+#17503=VERTEX_POINT('',#17504);+#17504=CARTESIAN_POINT('',(8.,-4.29,1.387778780781E-16));+#17505=LINE('',#17497,#49);+#17506=ORIENTED_EDGE('',*,*,#17507,.T.);+#17507=EDGE_CURVE('',#17503,#17508,#17510,.T.);+#17508=VERTEX_POINT('',#17509);+#17509=CARTESIAN_POINT('',(8.,-4.29,0.1));+#17510=LINE('',#17504,#2043);+#17511=ORIENTED_EDGE('',*,*,#17512,.T.);+#17512=EDGE_CURVE('',#17508,#17513,#17515,.T.);+#17513=VERTEX_POINT('',#17514);+#17514=CARTESIAN_POINT('',(7.579347141319,-4.29,0.1));+#17515=LINE('',#17509,#1576);+#17516=ORIENTED_EDGE('',*,*,#17517,.T.);+#17517=EDGE_CURVE('',#17513,#17518,#17520,.T.);+#17518=VERTEX_POINT('',#17519);+#17519=CARTESIAN_POINT('',(7.480866366018,-4.29,0.182635182233));+#17520=CIRCLE('',#17521,1.E-01);+#17521=AXIS2_PLACEMENT_3D('',#17500,#422,#13088);+#17522=ORIENTED_EDGE('',*,*,#17523,.T.);+#17523=EDGE_CURVE('',#17518,#17524,#17526,.T.);+#17524=VERTEX_POINT('',#17525);+#17525=CARTESIAN_POINT('',(7.396961550602,-4.29,0.684729635533));+#17526=LINE('',#17519,#13094);+#17527=ORIENTED_EDGE('',*,*,#17528,.T.);+#17528=EDGE_CURVE('',#17524,#8245,#17529,.T.);+#17529=CIRCLE('',#17530,0.2);+#17530=AXIS2_PLACEMENT_3D('',#17488,#1569,#13100);+#17531=PLANE('',#17532);+#17532=AXIS2_PLACEMENT_3D('',#17533,#1569,#13);+#17533=CARTESIAN_POINT('',(7.414276639233,-4.29,0.410238158856));+#17534=ADVANCED_FACE('',(#17535),#17542,.T.);+#17535=FACE_BOUND('',#17536,.F.);+#17536=EDGE_LOOP('',(#17537,#17527,#17540,#17541));+#17537=ORIENTED_EDGE('',*,*,#17538,.T.);+#17538=EDGE_CURVE('',#17458,#17524,#17539,.T.);+#17539=LINE('',#17459,#1568);+#17540=ORIENTED_EDGE('',*,*,#8244,.F.);+#17541=ORIENTED_EDGE('',*,*,#17462,.F.);+#17542=CYLINDRICAL_SURFACE('',#17543,0.2);+#17543=AXIS2_PLACEMENT_3D('',#17422,#422,#13100);+#17544=ADVANCED_FACE('',(#17545),#7271,.F.);+#17545=FACE_BOUND('',#17546,.F.);+#17546=EDGE_LOOP('',(#17472,#17547,#17548,#17552));+#17547=ORIENTED_EDGE('',*,*,#13238,.T.);+#17548=ORIENTED_EDGE('',*,*,#17549,.T.);+#17549=EDGE_CURVE('',#13235,#8265,#17550,.T.);+#17550=LINE('',#17551,#2043);+#17551=CARTESIAN_POINT('',(7.,-4.51,0.630119079428));+#17552=ORIENTED_EDGE('',*,*,#8264,.F.);+#17553=ADVANCED_FACE('',(#17554),#17613,.F.);+#17554=FACE_BOUND('',#17555,.F.);+#17555=EDGE_LOOP('',(#17556,#17557,#17563,#17570,#17575,#17582,#17587,#17592,#17597,#17603,#17608,#17612));+#17556=ORIENTED_EDGE('',*,*,#17549,.F.);+#17557=ORIENTED_EDGE('',*,*,#17558,.T.);+#17558=EDGE_CURVE('',#13235,#17559,#17561,.T.);+#17559=VERTEX_POINT('',#17560);+#17560=CARTESIAN_POINT('',(7.2,-4.51,0.75));+#17561=LINE('',#17562,#49);+#17562=CARTESIAN_POINT('',(6.85,-4.51,0.75));+#17563=ORIENTED_EDGE('',*,*,#17564,.T.);+#17564=EDGE_CURVE('',#17559,#17565,#17567,.T.);+#17565=VERTEX_POINT('',#17566);+#17566=CARTESIAN_POINT('',(7.298480775301,-4.51,0.667364817767));+#17567=CIRCLE('',#17568,0.1);+#17568=AXIS2_PLACEMENT_3D('',#17569,#422,#13051);+#17569=CARTESIAN_POINT('',(7.2,-4.51,0.65));+#17570=ORIENTED_EDGE('',*,*,#17571,.T.);+#17571=EDGE_CURVE('',#17565,#17572,#17574,.T.);+#17572=VERTEX_POINT('',#17573);+#17573=CARTESIAN_POINT('',(7.382385590716,-4.51,0.165270364467));+#17574=LINE('',#17566,#13057);+#17575=ORIENTED_EDGE('',*,*,#17576,.T.);+#17576=EDGE_CURVE('',#17572,#17577,#17579,.T.);+#17577=VERTEX_POINT('',#17578);+#17578=CARTESIAN_POINT('',(7.579347141319,-4.51,1.387778780781E-16));+#17579=CIRCLE('',#17580,0.2);+#17580=AXIS2_PLACEMENT_3D('',#17581,#1569,#13066);+#17581=CARTESIAN_POINT('',(7.579347141319,-4.51,0.2));+#17582=ORIENTED_EDGE('',*,*,#17583,.T.);+#17583=EDGE_CURVE('',#17577,#17584,#17586,.T.);+#17584=VERTEX_POINT('',#17585);+#17585=CARTESIAN_POINT('',(8.,-4.51,1.387778780781E-16));+#17586=LINE('',#17578,#49);+#17587=ORIENTED_EDGE('',*,*,#17588,.T.);+#17588=EDGE_CURVE('',#17584,#17589,#17591,.T.);+#17589=VERTEX_POINT('',#17590);+#17590=CARTESIAN_POINT('',(8.,-4.51,0.1));+#17591=LINE('',#17585,#2043);+#17592=ORIENTED_EDGE('',*,*,#17593,.T.);+#17593=EDGE_CURVE('',#17589,#17594,#17596,.T.);+#17594=VERTEX_POINT('',#17595);+#17595=CARTESIAN_POINT('',(7.579347141319,-4.51,0.1));+#17596=LINE('',#17590,#1576);+#17597=ORIENTED_EDGE('',*,*,#17598,.T.);+#17598=EDGE_CURVE('',#17594,#17599,#17601,.T.);+#17599=VERTEX_POINT('',#17600);+#17600=CARTESIAN_POINT('',(7.480866366018,-4.51,0.182635182233));+#17601=CIRCLE('',#17602,1.E-01);+#17602=AXIS2_PLACEMENT_3D('',#17581,#422,#13088);+#17603=ORIENTED_EDGE('',*,*,#17604,.T.);+#17604=EDGE_CURVE('',#17599,#17605,#17607,.T.);+#17605=VERTEX_POINT('',#17606);+#17606=CARTESIAN_POINT('',(7.396961550602,-4.51,0.684729635533));+#17607=LINE('',#17600,#13094);+#17608=ORIENTED_EDGE('',*,*,#17609,.T.);+#17609=EDGE_CURVE('',#17605,#8277,#17610,.T.);+#17610=CIRCLE('',#17611,0.2);+#17611=AXIS2_PLACEMENT_3D('',#17569,#1569,#13100);+#17612=ORIENTED_EDGE('',*,*,#8276,.T.);+#17613=PLANE('',#17614);+#17614=AXIS2_PLACEMENT_3D('',#17615,#1569,#13);+#17615=CARTESIAN_POINT('',(7.414276639233,-4.51,0.410238158856));+#17616=ADVANCED_FACE('',(#17617),#17678,.T.);+#17617=FACE_BOUND('',#17618,.T.);+#17618=EDGE_LOOP('',(#17619,#17623,#17629,#17636,#17641,#17648,#17653,#17658,#17663,#17669,#17674,#8283));+#17619=ORIENTED_EDGE('',*,*,#17620,.F.);+#17620=EDGE_CURVE('',#13231,#8285,#17621,.T.);+#17621=LINE('',#17622,#2043);+#17622=CARTESIAN_POINT('',(7.,-4.69,0.630119079428));+#17623=ORIENTED_EDGE('',*,*,#17624,.T.);+#17624=EDGE_CURVE('',#13231,#17625,#17627,.T.);+#17625=VERTEX_POINT('',#17626);+#17626=CARTESIAN_POINT('',(7.2,-4.69,0.75));+#17627=LINE('',#17628,#49);+#17628=CARTESIAN_POINT('',(6.85,-4.69,0.75));+#17629=ORIENTED_EDGE('',*,*,#17630,.T.);+#17630=EDGE_CURVE('',#17625,#17631,#17633,.T.);+#17631=VERTEX_POINT('',#17632);+#17632=CARTESIAN_POINT('',(7.298480775301,-4.69,0.667364817767));+#17633=CIRCLE('',#17634,0.1);+#17634=AXIS2_PLACEMENT_3D('',#17635,#422,#13051);+#17635=CARTESIAN_POINT('',(7.2,-4.69,0.65));+#17636=ORIENTED_EDGE('',*,*,#17637,.T.);+#17637=EDGE_CURVE('',#17631,#17638,#17640,.T.);+#17638=VERTEX_POINT('',#17639);+#17639=CARTESIAN_POINT('',(7.382385590716,-4.69,0.165270364467));+#17640=LINE('',#17632,#13057);+#17641=ORIENTED_EDGE('',*,*,#17642,.T.);+#17642=EDGE_CURVE('',#17638,#17643,#17645,.T.);+#17643=VERTEX_POINT('',#17644);+#17644=CARTESIAN_POINT('',(7.579347141319,-4.69,1.387778780781E-16));+#17645=CIRCLE('',#17646,0.2);+#17646=AXIS2_PLACEMENT_3D('',#17647,#1569,#13066);+#17647=CARTESIAN_POINT('',(7.579347141319,-4.69,0.2));+#17648=ORIENTED_EDGE('',*,*,#17649,.T.);+#17649=EDGE_CURVE('',#17643,#17650,#17652,.T.);+#17650=VERTEX_POINT('',#17651);+#17651=CARTESIAN_POINT('',(8.,-4.69,1.387778780781E-16));+#17652=LINE('',#17644,#49);+#17653=ORIENTED_EDGE('',*,*,#17654,.T.);+#17654=EDGE_CURVE('',#17650,#17655,#17657,.T.);+#17655=VERTEX_POINT('',#17656);+#17656=CARTESIAN_POINT('',(8.,-4.69,0.1));+#17657=LINE('',#17651,#2043);+#17658=ORIENTED_EDGE('',*,*,#17659,.T.);+#17659=EDGE_CURVE('',#17655,#17660,#17662,.T.);+#17660=VERTEX_POINT('',#17661);+#17661=CARTESIAN_POINT('',(7.579347141319,-4.69,0.1));+#17662=LINE('',#17656,#1576);+#17663=ORIENTED_EDGE('',*,*,#17664,.T.);+#17664=EDGE_CURVE('',#17660,#17665,#17667,.T.);+#17665=VERTEX_POINT('',#17666);+#17666=CARTESIAN_POINT('',(7.480866366018,-4.69,0.182635182233));+#17667=CIRCLE('',#17668,1.E-01);+#17668=AXIS2_PLACEMENT_3D('',#17647,#422,#13088);+#17669=ORIENTED_EDGE('',*,*,#17670,.T.);+#17670=EDGE_CURVE('',#17665,#17671,#17673,.T.);+#17671=VERTEX_POINT('',#17672);+#17672=CARTESIAN_POINT('',(7.396961550602,-4.69,0.684729635533));+#17673=LINE('',#17666,#13094);+#17674=ORIENTED_EDGE('',*,*,#17675,.T.);+#17675=EDGE_CURVE('',#17671,#8280,#17676,.T.);+#17676=CIRCLE('',#17677,0.2);+#17677=AXIS2_PLACEMENT_3D('',#17635,#1569,#13100);+#17678=PLANE('',#17679);+#17679=AXIS2_PLACEMENT_3D('',#17680,#1569,#13);+#17680=CARTESIAN_POINT('',(7.414276639233,-4.69,0.410238158856));+#17681=ADVANCED_FACE('',(#17682),#17689,.T.);+#17682=FACE_BOUND('',#17683,.F.);+#17683=EDGE_LOOP('',(#17684,#17674,#17687,#17688));+#17684=ORIENTED_EDGE('',*,*,#17685,.T.);+#17685=EDGE_CURVE('',#17605,#17671,#17686,.T.);+#17686=LINE('',#17606,#1568);+#17687=ORIENTED_EDGE('',*,*,#8279,.F.);+#17688=ORIENTED_EDGE('',*,*,#17609,.F.);+#17689=CYLINDRICAL_SURFACE('',#17690,0.2);+#17690=AXIS2_PLACEMENT_3D('',#17569,#422,#13100);+#17691=ADVANCED_FACE('',(#17692),#7271,.F.);+#17692=FACE_BOUND('',#17693,.F.);+#17693=EDGE_LOOP('',(#17619,#17694,#17695,#17699));+#17694=ORIENTED_EDGE('',*,*,#13230,.T.);+#17695=ORIENTED_EDGE('',*,*,#17696,.T.);+#17696=EDGE_CURVE('',#13227,#8300,#17697,.T.);+#17697=LINE('',#17698,#2043);+#17698=CARTESIAN_POINT('',(7.,-4.91,0.630119079428));+#17699=ORIENTED_EDGE('',*,*,#8299,.F.);+#17700=ADVANCED_FACE('',(#17701),#17760,.F.);+#17701=FACE_BOUND('',#17702,.F.);+#17702=EDGE_LOOP('',(#17703,#17704,#17710,#17717,#17722,#17729,#17734,#17739,#17744,#17750,#17755,#17759));+#17703=ORIENTED_EDGE('',*,*,#17696,.F.);+#17704=ORIENTED_EDGE('',*,*,#17705,.T.);+#17705=EDGE_CURVE('',#13227,#17706,#17708,.T.);+#17706=VERTEX_POINT('',#17707);+#17707=CARTESIAN_POINT('',(7.2,-4.91,0.75));+#17708=LINE('',#17709,#49);+#17709=CARTESIAN_POINT('',(6.85,-4.91,0.75));+#17710=ORIENTED_EDGE('',*,*,#17711,.T.);+#17711=EDGE_CURVE('',#17706,#17712,#17714,.T.);+#17712=VERTEX_POINT('',#17713);+#17713=CARTESIAN_POINT('',(7.298480775301,-4.91,0.667364817767));+#17714=CIRCLE('',#17715,0.1);+#17715=AXIS2_PLACEMENT_3D('',#17716,#422,#13051);+#17716=CARTESIAN_POINT('',(7.2,-4.91,0.65));+#17717=ORIENTED_EDGE('',*,*,#17718,.T.);+#17718=EDGE_CURVE('',#17712,#17719,#17721,.T.);+#17719=VERTEX_POINT('',#17720);+#17720=CARTESIAN_POINT('',(7.382385590716,-4.91,0.165270364467));+#17721=LINE('',#17713,#13057);+#17722=ORIENTED_EDGE('',*,*,#17723,.T.);+#17723=EDGE_CURVE('',#17719,#17724,#17726,.T.);+#17724=VERTEX_POINT('',#17725);+#17725=CARTESIAN_POINT('',(7.579347141319,-4.91,1.387778780781E-16));+#17726=CIRCLE('',#17727,0.2);+#17727=AXIS2_PLACEMENT_3D('',#17728,#1569,#13066);+#17728=CARTESIAN_POINT('',(7.579347141319,-4.91,0.2));+#17729=ORIENTED_EDGE('',*,*,#17730,.T.);+#17730=EDGE_CURVE('',#17724,#17731,#17733,.T.);+#17731=VERTEX_POINT('',#17732);+#17732=CARTESIAN_POINT('',(8.,-4.91,1.387778780781E-16));+#17733=LINE('',#17725,#49);+#17734=ORIENTED_EDGE('',*,*,#17735,.T.);+#17735=EDGE_CURVE('',#17731,#17736,#17738,.T.);+#17736=VERTEX_POINT('',#17737);+#17737=CARTESIAN_POINT('',(8.,-4.91,0.1));+#17738=LINE('',#17732,#2043);+#17739=ORIENTED_EDGE('',*,*,#17740,.T.);+#17740=EDGE_CURVE('',#17736,#17741,#17743,.T.);+#17741=VERTEX_POINT('',#17742);+#17742=CARTESIAN_POINT('',(7.579347141319,-4.91,0.1));+#17743=LINE('',#17737,#1576);+#17744=ORIENTED_EDGE('',*,*,#17745,.T.);+#17745=EDGE_CURVE('',#17741,#17746,#17748,.T.);+#17746=VERTEX_POINT('',#17747);+#17747=CARTESIAN_POINT('',(7.480866366018,-4.91,0.182635182233));+#17748=CIRCLE('',#17749,1.E-01);+#17749=AXIS2_PLACEMENT_3D('',#17728,#422,#13088);+#17750=ORIENTED_EDGE('',*,*,#17751,.T.);+#17751=EDGE_CURVE('',#17746,#17752,#17754,.T.);+#17752=VERTEX_POINT('',#17753);+#17753=CARTESIAN_POINT('',(7.396961550602,-4.91,0.684729635533));+#17754=LINE('',#17747,#13094);+#17755=ORIENTED_EDGE('',*,*,#17756,.T.);+#17756=EDGE_CURVE('',#17752,#8312,#17757,.T.);+#17757=CIRCLE('',#17758,0.2);+#17758=AXIS2_PLACEMENT_3D('',#17716,#1569,#13100);+#17759=ORIENTED_EDGE('',*,*,#8311,.T.);+#17760=PLANE('',#17761);+#17761=AXIS2_PLACEMENT_3D('',#17762,#1569,#13);+#17762=CARTESIAN_POINT('',(7.414276639233,-4.91,0.410238158856));+#17763=ADVANCED_FACE('',(#17764),#17825,.T.);+#17764=FACE_BOUND('',#17765,.T.);+#17765=EDGE_LOOP('',(#17766,#17770,#17776,#17783,#17788,#17795,#17800,#17805,#17810,#17816,#17821,#8318));+#17766=ORIENTED_EDGE('',*,*,#17767,.F.);+#17767=EDGE_CURVE('',#13223,#8320,#17768,.T.);+#17768=LINE('',#17769,#2043);+#17769=CARTESIAN_POINT('',(7.,-5.09,0.630119079428));+#17770=ORIENTED_EDGE('',*,*,#17771,.T.);+#17771=EDGE_CURVE('',#13223,#17772,#17774,.T.);+#17772=VERTEX_POINT('',#17773);+#17773=CARTESIAN_POINT('',(7.2,-5.09,0.75));+#17774=LINE('',#17775,#49);+#17775=CARTESIAN_POINT('',(6.85,-5.09,0.75));+#17776=ORIENTED_EDGE('',*,*,#17777,.T.);+#17777=EDGE_CURVE('',#17772,#17778,#17780,.T.);+#17778=VERTEX_POINT('',#17779);+#17779=CARTESIAN_POINT('',(7.298480775301,-5.09,0.667364817767));+#17780=CIRCLE('',#17781,0.1);+#17781=AXIS2_PLACEMENT_3D('',#17782,#422,#13051);+#17782=CARTESIAN_POINT('',(7.2,-5.09,0.65));+#17783=ORIENTED_EDGE('',*,*,#17784,.T.);+#17784=EDGE_CURVE('',#17778,#17785,#17787,.T.);+#17785=VERTEX_POINT('',#17786);+#17786=CARTESIAN_POINT('',(7.382385590716,-5.09,0.165270364467));+#17787=LINE('',#17779,#13057);+#17788=ORIENTED_EDGE('',*,*,#17789,.T.);+#17789=EDGE_CURVE('',#17785,#17790,#17792,.T.);+#17790=VERTEX_POINT('',#17791);+#17791=CARTESIAN_POINT('',(7.579347141319,-5.09,1.387778780781E-16));+#17792=CIRCLE('',#17793,0.2);+#17793=AXIS2_PLACEMENT_3D('',#17794,#1569,#13066);+#17794=CARTESIAN_POINT('',(7.579347141319,-5.09,0.2));+#17795=ORIENTED_EDGE('',*,*,#17796,.T.);+#17796=EDGE_CURVE('',#17790,#17797,#17799,.T.);+#17797=VERTEX_POINT('',#17798);+#17798=CARTESIAN_POINT('',(8.,-5.09,1.387778780781E-16));+#17799=LINE('',#17791,#49);+#17800=ORIENTED_EDGE('',*,*,#17801,.T.);+#17801=EDGE_CURVE('',#17797,#17802,#17804,.T.);+#17802=VERTEX_POINT('',#17803);+#17803=CARTESIAN_POINT('',(8.,-5.09,0.1));+#17804=LINE('',#17798,#2043);+#17805=ORIENTED_EDGE('',*,*,#17806,.T.);+#17806=EDGE_CURVE('',#17802,#17807,#17809,.T.);+#17807=VERTEX_POINT('',#17808);+#17808=CARTESIAN_POINT('',(7.579347141319,-5.09,0.1));+#17809=LINE('',#17803,#1576);+#17810=ORIENTED_EDGE('',*,*,#17811,.T.);+#17811=EDGE_CURVE('',#17807,#17812,#17814,.T.);+#17812=VERTEX_POINT('',#17813);+#17813=CARTESIAN_POINT('',(7.480866366018,-5.09,0.182635182233));+#17814=CIRCLE('',#17815,1.E-01);+#17815=AXIS2_PLACEMENT_3D('',#17794,#422,#13088);+#17816=ORIENTED_EDGE('',*,*,#17817,.T.);+#17817=EDGE_CURVE('',#17812,#17818,#17820,.T.);+#17818=VERTEX_POINT('',#17819);+#17819=CARTESIAN_POINT('',(7.396961550602,-5.09,0.684729635533));+#17820=LINE('',#17813,#13094);+#17821=ORIENTED_EDGE('',*,*,#17822,.T.);+#17822=EDGE_CURVE('',#17818,#8315,#17823,.T.);+#17823=CIRCLE('',#17824,0.2);+#17824=AXIS2_PLACEMENT_3D('',#17782,#1569,#13100);+#17825=PLANE('',#17826);+#17826=AXIS2_PLACEMENT_3D('',#17827,#1569,#13);+#17827=CARTESIAN_POINT('',(7.414276639233,-5.09,0.410238158856));+#17828=ADVANCED_FACE('',(#17829),#17836,.T.);+#17829=FACE_BOUND('',#17830,.F.);+#17830=EDGE_LOOP('',(#17831,#17821,#17834,#17835));+#17831=ORIENTED_EDGE('',*,*,#17832,.T.);+#17832=EDGE_CURVE('',#17752,#17818,#17833,.T.);+#17833=LINE('',#17753,#1568);+#17834=ORIENTED_EDGE('',*,*,#8314,.F.);+#17835=ORIENTED_EDGE('',*,*,#17756,.F.);+#17836=CYLINDRICAL_SURFACE('',#17837,0.2);+#17837=AXIS2_PLACEMENT_3D('',#17716,#422,#13100);+#17838=ADVANCED_FACE('',(#17839),#7271,.F.);+#17839=FACE_BOUND('',#17840,.F.);+#17840=EDGE_LOOP('',(#17766,#17841,#17842,#17846));+#17841=ORIENTED_EDGE('',*,*,#13222,.T.);+#17842=ORIENTED_EDGE('',*,*,#17843,.T.);+#17843=EDGE_CURVE('',#13219,#8335,#17844,.T.);+#17844=LINE('',#17845,#2043);+#17845=CARTESIAN_POINT('',(7.,-5.31,0.630119079428));+#17846=ORIENTED_EDGE('',*,*,#8334,.F.);+#17847=ADVANCED_FACE('',(#17848),#17907,.F.);+#17848=FACE_BOUND('',#17849,.F.);+#17849=EDGE_LOOP('',(#17850,#17851,#17857,#17864,#17869,#17876,#17881,#17886,#17891,#17897,#17902,#17906));+#17850=ORIENTED_EDGE('',*,*,#17843,.F.);+#17851=ORIENTED_EDGE('',*,*,#17852,.T.);+#17852=EDGE_CURVE('',#13219,#17853,#17855,.T.);+#17853=VERTEX_POINT('',#17854);+#17854=CARTESIAN_POINT('',(7.2,-5.31,0.75));+#17855=LINE('',#17856,#49);+#17856=CARTESIAN_POINT('',(6.85,-5.31,0.75));+#17857=ORIENTED_EDGE('',*,*,#17858,.T.);+#17858=EDGE_CURVE('',#17853,#17859,#17861,.T.);+#17859=VERTEX_POINT('',#17860);+#17860=CARTESIAN_POINT('',(7.298480775301,-5.31,0.667364817767));+#17861=CIRCLE('',#17862,0.1);+#17862=AXIS2_PLACEMENT_3D('',#17863,#422,#13051);+#17863=CARTESIAN_POINT('',(7.2,-5.31,0.65));+#17864=ORIENTED_EDGE('',*,*,#17865,.T.);+#17865=EDGE_CURVE('',#17859,#17866,#17868,.T.);+#17866=VERTEX_POINT('',#17867);+#17867=CARTESIAN_POINT('',(7.382385590716,-5.31,0.165270364467));+#17868=LINE('',#17860,#13057);+#17869=ORIENTED_EDGE('',*,*,#17870,.T.);+#17870=EDGE_CURVE('',#17866,#17871,#17873,.T.);+#17871=VERTEX_POINT('',#17872);+#17872=CARTESIAN_POINT('',(7.579347141319,-5.31,1.387778780781E-16));+#17873=CIRCLE('',#17874,0.2);+#17874=AXIS2_PLACEMENT_3D('',#17875,#1569,#13066);+#17875=CARTESIAN_POINT('',(7.579347141319,-5.31,0.2));+#17876=ORIENTED_EDGE('',*,*,#17877,.T.);+#17877=EDGE_CURVE('',#17871,#17878,#17880,.T.);+#17878=VERTEX_POINT('',#17879);+#17879=CARTESIAN_POINT('',(8.,-5.31,1.387778780781E-16));+#17880=LINE('',#17872,#49);+#17881=ORIENTED_EDGE('',*,*,#17882,.T.);+#17882=EDGE_CURVE('',#17878,#17883,#17885,.T.);+#17883=VERTEX_POINT('',#17884);+#17884=CARTESIAN_POINT('',(8.,-5.31,0.1));+#17885=LINE('',#17879,#2043);+#17886=ORIENTED_EDGE('',*,*,#17887,.T.);+#17887=EDGE_CURVE('',#17883,#17888,#17890,.T.);+#17888=VERTEX_POINT('',#17889);+#17889=CARTESIAN_POINT('',(7.579347141319,-5.31,0.1));+#17890=LINE('',#17884,#1576);+#17891=ORIENTED_EDGE('',*,*,#17892,.T.);+#17892=EDGE_CURVE('',#17888,#17893,#17895,.T.);+#17893=VERTEX_POINT('',#17894);+#17894=CARTESIAN_POINT('',(7.480866366018,-5.31,0.182635182233));+#17895=CIRCLE('',#17896,1.E-01);+#17896=AXIS2_PLACEMENT_3D('',#17875,#422,#13088);+#17897=ORIENTED_EDGE('',*,*,#17898,.T.);+#17898=EDGE_CURVE('',#17893,#17899,#17901,.T.);+#17899=VERTEX_POINT('',#17900);+#17900=CARTESIAN_POINT('',(7.396961550602,-5.31,0.684729635533));+#17901=LINE('',#17894,#13094);+#17902=ORIENTED_EDGE('',*,*,#17903,.T.);+#17903=EDGE_CURVE('',#17899,#8347,#17904,.T.);+#17904=CIRCLE('',#17905,0.2);+#17905=AXIS2_PLACEMENT_3D('',#17863,#1569,#13100);+#17906=ORIENTED_EDGE('',*,*,#8346,.T.);+#17907=PLANE('',#17908);+#17908=AXIS2_PLACEMENT_3D('',#17909,#1569,#13);+#17909=CARTESIAN_POINT('',(7.414276639233,-5.31,0.410238158856));+#17910=ADVANCED_FACE('',(#17911),#17972,.T.);+#17911=FACE_BOUND('',#17912,.T.);+#17912=EDGE_LOOP('',(#17913,#17917,#17923,#17930,#17935,#17942,#17947,#17952,#17957,#17963,#17968,#8353));+#17913=ORIENTED_EDGE('',*,*,#17914,.F.);+#17914=EDGE_CURVE('',#13215,#8355,#17915,.T.);+#17915=LINE('',#17916,#2043);+#17916=CARTESIAN_POINT('',(7.,-5.49,0.630119079428));+#17917=ORIENTED_EDGE('',*,*,#17918,.T.);+#17918=EDGE_CURVE('',#13215,#17919,#17921,.T.);+#17919=VERTEX_POINT('',#17920);+#17920=CARTESIAN_POINT('',(7.2,-5.49,0.75));+#17921=LINE('',#17922,#49);+#17922=CARTESIAN_POINT('',(6.85,-5.49,0.75));+#17923=ORIENTED_EDGE('',*,*,#17924,.T.);+#17924=EDGE_CURVE('',#17919,#17925,#17927,.T.);+#17925=VERTEX_POINT('',#17926);+#17926=CARTESIAN_POINT('',(7.298480775301,-5.49,0.667364817767));+#17927=CIRCLE('',#17928,0.1);+#17928=AXIS2_PLACEMENT_3D('',#17929,#422,#13051);+#17929=CARTESIAN_POINT('',(7.2,-5.49,0.65));+#17930=ORIENTED_EDGE('',*,*,#17931,.T.);+#17931=EDGE_CURVE('',#17925,#17932,#17934,.T.);+#17932=VERTEX_POINT('',#17933);+#17933=CARTESIAN_POINT('',(7.382385590716,-5.49,0.165270364467));+#17934=LINE('',#17926,#13057);+#17935=ORIENTED_EDGE('',*,*,#17936,.T.);+#17936=EDGE_CURVE('',#17932,#17937,#17939,.T.);+#17937=VERTEX_POINT('',#17938);+#17938=CARTESIAN_POINT('',(7.579347141319,-5.49,1.387778780781E-16));+#17939=CIRCLE('',#17940,0.2);+#17940=AXIS2_PLACEMENT_3D('',#17941,#1569,#13066);+#17941=CARTESIAN_POINT('',(7.579347141319,-5.49,0.2));+#17942=ORIENTED_EDGE('',*,*,#17943,.T.);+#17943=EDGE_CURVE('',#17937,#17944,#17946,.T.);+#17944=VERTEX_POINT('',#17945);+#17945=CARTESIAN_POINT('',(8.,-5.49,1.387778780781E-16));+#17946=LINE('',#17938,#49);+#17947=ORIENTED_EDGE('',*,*,#17948,.T.);+#17948=EDGE_CURVE('',#17944,#17949,#17951,.T.);+#17949=VERTEX_POINT('',#17950);+#17950=CARTESIAN_POINT('',(8.,-5.49,0.1));+#17951=LINE('',#17945,#2043);+#17952=ORIENTED_EDGE('',*,*,#17953,.T.);+#17953=EDGE_CURVE('',#17949,#17954,#17956,.T.);+#17954=VERTEX_POINT('',#17955);+#17955=CARTESIAN_POINT('',(7.579347141319,-5.49,0.1));+#17956=LINE('',#17950,#1576);+#17957=ORIENTED_EDGE('',*,*,#17958,.T.);+#17958=EDGE_CURVE('',#17954,#17959,#17961,.T.);+#17959=VERTEX_POINT('',#17960);+#17960=CARTESIAN_POINT('',(7.480866366018,-5.49,0.182635182233));+#17961=CIRCLE('',#17962,1.E-01);+#17962=AXIS2_PLACEMENT_3D('',#17941,#422,#13088);+#17963=ORIENTED_EDGE('',*,*,#17964,.T.);+#17964=EDGE_CURVE('',#17959,#17965,#17967,.T.);+#17965=VERTEX_POINT('',#17966);+#17966=CARTESIAN_POINT('',(7.396961550602,-5.49,0.684729635533));+#17967=LINE('',#17960,#13094);+#17968=ORIENTED_EDGE('',*,*,#17969,.T.);+#17969=EDGE_CURVE('',#17965,#8350,#17970,.T.);+#17970=CIRCLE('',#17971,0.2);+#17971=AXIS2_PLACEMENT_3D('',#17929,#1569,#13100);+#17972=PLANE('',#17973);+#17973=AXIS2_PLACEMENT_3D('',#17974,#1569,#13);+#17974=CARTESIAN_POINT('',(7.414276639233,-5.49,0.410238158856));+#17975=ADVANCED_FACE('',(#17976),#17983,.T.);+#17976=FACE_BOUND('',#17977,.F.);+#17977=EDGE_LOOP('',(#17978,#17968,#17981,#17982));+#17978=ORIENTED_EDGE('',*,*,#17979,.T.);+#17979=EDGE_CURVE('',#17899,#17965,#17980,.T.);+#17980=LINE('',#17900,#1568);+#17981=ORIENTED_EDGE('',*,*,#8349,.F.);+#17982=ORIENTED_EDGE('',*,*,#17903,.F.);+#17983=CYLINDRICAL_SURFACE('',#17984,0.2);+#17984=AXIS2_PLACEMENT_3D('',#17863,#422,#13100);+#17985=ADVANCED_FACE('',(#17986),#7271,.F.);+#17986=FACE_BOUND('',#17987,.F.);+#17987=EDGE_LOOP('',(#17913,#17988,#17989,#17993));+#17988=ORIENTED_EDGE('',*,*,#13214,.T.);+#17989=ORIENTED_EDGE('',*,*,#17990,.T.);+#17990=EDGE_CURVE('',#13211,#8370,#17991,.T.);+#17991=LINE('',#17992,#2043);+#17992=CARTESIAN_POINT('',(7.,-5.71,0.630119079428));+#17993=ORIENTED_EDGE('',*,*,#8369,.F.);+#17994=ADVANCED_FACE('',(#17995),#18054,.F.);+#17995=FACE_BOUND('',#17996,.F.);+#17996=EDGE_LOOP('',(#17997,#17998,#18004,#18011,#18016,#18023,#18028,#18033,#18038,#18044,#18049,#18053));+#17997=ORIENTED_EDGE('',*,*,#17990,.F.);+#17998=ORIENTED_EDGE('',*,*,#17999,.T.);+#17999=EDGE_CURVE('',#13211,#18000,#18002,.T.);+#18000=VERTEX_POINT('',#18001);+#18001=CARTESIAN_POINT('',(7.2,-5.71,0.75));+#18002=LINE('',#18003,#49);+#18003=CARTESIAN_POINT('',(6.85,-5.71,0.75));+#18004=ORIENTED_EDGE('',*,*,#18005,.T.);+#18005=EDGE_CURVE('',#18000,#18006,#18008,.T.);+#18006=VERTEX_POINT('',#18007);+#18007=CARTESIAN_POINT('',(7.298480775301,-5.71,0.667364817767));+#18008=CIRCLE('',#18009,0.1);+#18009=AXIS2_PLACEMENT_3D('',#18010,#422,#13051);+#18010=CARTESIAN_POINT('',(7.2,-5.71,0.65));+#18011=ORIENTED_EDGE('',*,*,#18012,.T.);+#18012=EDGE_CURVE('',#18006,#18013,#18015,.T.);+#18013=VERTEX_POINT('',#18014);+#18014=CARTESIAN_POINT('',(7.382385590716,-5.71,0.165270364467));+#18015=LINE('',#18007,#13057);+#18016=ORIENTED_EDGE('',*,*,#18017,.T.);+#18017=EDGE_CURVE('',#18013,#18018,#18020,.T.);+#18018=VERTEX_POINT('',#18019);+#18019=CARTESIAN_POINT('',(7.579347141319,-5.71,1.387778780781E-16));+#18020=CIRCLE('',#18021,0.2);+#18021=AXIS2_PLACEMENT_3D('',#18022,#1569,#13066);+#18022=CARTESIAN_POINT('',(7.579347141319,-5.71,0.2));+#18023=ORIENTED_EDGE('',*,*,#18024,.T.);+#18024=EDGE_CURVE('',#18018,#18025,#18027,.T.);+#18025=VERTEX_POINT('',#18026);+#18026=CARTESIAN_POINT('',(8.,-5.71,1.387778780781E-16));+#18027=LINE('',#18019,#49);+#18028=ORIENTED_EDGE('',*,*,#18029,.T.);+#18029=EDGE_CURVE('',#18025,#18030,#18032,.T.);+#18030=VERTEX_POINT('',#18031);+#18031=CARTESIAN_POINT('',(8.,-5.71,0.1));+#18032=LINE('',#18026,#2043);+#18033=ORIENTED_EDGE('',*,*,#18034,.T.);+#18034=EDGE_CURVE('',#18030,#18035,#18037,.T.);+#18035=VERTEX_POINT('',#18036);+#18036=CARTESIAN_POINT('',(7.579347141319,-5.71,0.1));+#18037=LINE('',#18031,#1576);+#18038=ORIENTED_EDGE('',*,*,#18039,.T.);+#18039=EDGE_CURVE('',#18035,#18040,#18042,.T.);+#18040=VERTEX_POINT('',#18041);+#18041=CARTESIAN_POINT('',(7.480866366018,-5.71,0.182635182233));+#18042=CIRCLE('',#18043,1.E-01);+#18043=AXIS2_PLACEMENT_3D('',#18022,#422,#13088);+#18044=ORIENTED_EDGE('',*,*,#18045,.T.);+#18045=EDGE_CURVE('',#18040,#18046,#18048,.T.);+#18046=VERTEX_POINT('',#18047);+#18047=CARTESIAN_POINT('',(7.396961550602,-5.71,0.684729635533));+#18048=LINE('',#18041,#13094);+#18049=ORIENTED_EDGE('',*,*,#18050,.T.);+#18050=EDGE_CURVE('',#18046,#8382,#18051,.T.);+#18051=CIRCLE('',#18052,0.2);+#18052=AXIS2_PLACEMENT_3D('',#18010,#1569,#13100);+#18053=ORIENTED_EDGE('',*,*,#8381,.T.);+#18054=PLANE('',#18055);+#18055=AXIS2_PLACEMENT_3D('',#18056,#1569,#13);+#18056=CARTESIAN_POINT('',(7.414276639233,-5.71,0.410238158856));+#18057=ADVANCED_FACE('',(#18058),#18119,.T.);+#18058=FACE_BOUND('',#18059,.T.);+#18059=EDGE_LOOP('',(#18060,#18064,#18070,#18077,#18082,#18089,#18094,#18099,#18104,#18110,#18115,#8388));+#18060=ORIENTED_EDGE('',*,*,#18061,.F.);+#18061=EDGE_CURVE('',#13207,#8390,#18062,.T.);+#18062=LINE('',#18063,#2043);+#18063=CARTESIAN_POINT('',(7.,-5.89,0.630119079428));+#18064=ORIENTED_EDGE('',*,*,#18065,.T.);+#18065=EDGE_CURVE('',#13207,#18066,#18068,.T.);+#18066=VERTEX_POINT('',#18067);+#18067=CARTESIAN_POINT('',(7.2,-5.89,0.75));+#18068=LINE('',#18069,#49);+#18069=CARTESIAN_POINT('',(6.85,-5.89,0.75));+#18070=ORIENTED_EDGE('',*,*,#18071,.T.);+#18071=EDGE_CURVE('',#18066,#18072,#18074,.T.);+#18072=VERTEX_POINT('',#18073);+#18073=CARTESIAN_POINT('',(7.298480775301,-5.89,0.667364817767));+#18074=CIRCLE('',#18075,0.1);+#18075=AXIS2_PLACEMENT_3D('',#18076,#422,#13051);+#18076=CARTESIAN_POINT('',(7.2,-5.89,0.65));+#18077=ORIENTED_EDGE('',*,*,#18078,.T.);+#18078=EDGE_CURVE('',#18072,#18079,#18081,.T.);+#18079=VERTEX_POINT('',#18080);+#18080=CARTESIAN_POINT('',(7.382385590716,-5.89,0.165270364467));+#18081=LINE('',#18073,#13057);+#18082=ORIENTED_EDGE('',*,*,#18083,.T.);+#18083=EDGE_CURVE('',#18079,#18084,#18086,.T.);+#18084=VERTEX_POINT('',#18085);+#18085=CARTESIAN_POINT('',(7.579347141319,-5.89,1.387778780781E-16));+#18086=CIRCLE('',#18087,0.2);+#18087=AXIS2_PLACEMENT_3D('',#18088,#1569,#13066);+#18088=CARTESIAN_POINT('',(7.579347141319,-5.89,0.2));+#18089=ORIENTED_EDGE('',*,*,#18090,.T.);+#18090=EDGE_CURVE('',#18084,#18091,#18093,.T.);+#18091=VERTEX_POINT('',#18092);+#18092=CARTESIAN_POINT('',(8.,-5.89,1.387778780781E-16));+#18093=LINE('',#18085,#49);+#18094=ORIENTED_EDGE('',*,*,#18095,.T.);+#18095=EDGE_CURVE('',#18091,#18096,#18098,.T.);+#18096=VERTEX_POINT('',#18097);+#18097=CARTESIAN_POINT('',(8.,-5.89,0.1));+#18098=LINE('',#18092,#2043);+#18099=ORIENTED_EDGE('',*,*,#18100,.T.);+#18100=EDGE_CURVE('',#18096,#18101,#18103,.T.);+#18101=VERTEX_POINT('',#18102);+#18102=CARTESIAN_POINT('',(7.579347141319,-5.89,0.1));+#18103=LINE('',#18097,#1576);+#18104=ORIENTED_EDGE('',*,*,#18105,.T.);+#18105=EDGE_CURVE('',#18101,#18106,#18108,.T.);+#18106=VERTEX_POINT('',#18107);+#18107=CARTESIAN_POINT('',(7.480866366018,-5.89,0.182635182233));+#18108=CIRCLE('',#18109,1.E-01);+#18109=AXIS2_PLACEMENT_3D('',#18088,#422,#13088);+#18110=ORIENTED_EDGE('',*,*,#18111,.T.);+#18111=EDGE_CURVE('',#18106,#18112,#18114,.T.);+#18112=VERTEX_POINT('',#18113);+#18113=CARTESIAN_POINT('',(7.396961550602,-5.89,0.684729635533));+#18114=LINE('',#18107,#13094);+#18115=ORIENTED_EDGE('',*,*,#18116,.T.);+#18116=EDGE_CURVE('',#18112,#8385,#18117,.T.);+#18117=CIRCLE('',#18118,0.2);+#18118=AXIS2_PLACEMENT_3D('',#18076,#1569,#13100);+#18119=PLANE('',#18120);+#18120=AXIS2_PLACEMENT_3D('',#18121,#1569,#13);+#18121=CARTESIAN_POINT('',(7.414276639233,-5.89,0.410238158856));+#18122=ADVANCED_FACE('',(#18123),#18130,.T.);+#18123=FACE_BOUND('',#18124,.F.);+#18124=EDGE_LOOP('',(#18125,#18115,#18128,#18129));+#18125=ORIENTED_EDGE('',*,*,#18126,.T.);+#18126=EDGE_CURVE('',#18046,#18112,#18127,.T.);+#18127=LINE('',#18047,#1568);+#18128=ORIENTED_EDGE('',*,*,#8384,.F.);+#18129=ORIENTED_EDGE('',*,*,#18050,.F.);+#18130=CYLINDRICAL_SURFACE('',#18131,0.2);+#18131=AXIS2_PLACEMENT_3D('',#18010,#422,#13100);+#18132=ADVANCED_FACE('',(#18133),#7271,.F.);+#18133=FACE_BOUND('',#18134,.F.);+#18134=EDGE_LOOP('',(#18060,#18135,#18136,#18140));+#18135=ORIENTED_EDGE('',*,*,#13206,.T.);+#18136=ORIENTED_EDGE('',*,*,#18137,.T.);+#18137=EDGE_CURVE('',#13203,#8405,#18138,.T.);+#18138=LINE('',#18139,#2043);+#18139=CARTESIAN_POINT('',(7.,-6.11,0.630119079428));+#18140=ORIENTED_EDGE('',*,*,#8404,.F.);+#18141=ADVANCED_FACE('',(#18142),#18201,.F.);+#18142=FACE_BOUND('',#18143,.F.);+#18143=EDGE_LOOP('',(#18144,#18145,#18151,#18158,#18163,#18170,#18175,#18180,#18185,#18191,#18196,#18200));+#18144=ORIENTED_EDGE('',*,*,#18137,.F.);+#18145=ORIENTED_EDGE('',*,*,#18146,.T.);+#18146=EDGE_CURVE('',#13203,#18147,#18149,.T.);+#18147=VERTEX_POINT('',#18148);+#18148=CARTESIAN_POINT('',(7.2,-6.11,0.75));+#18149=LINE('',#18150,#49);+#18150=CARTESIAN_POINT('',(6.85,-6.11,0.75));+#18151=ORIENTED_EDGE('',*,*,#18152,.T.);+#18152=EDGE_CURVE('',#18147,#18153,#18155,.T.);+#18153=VERTEX_POINT('',#18154);+#18154=CARTESIAN_POINT('',(7.298480775301,-6.11,0.667364817767));+#18155=CIRCLE('',#18156,0.1);+#18156=AXIS2_PLACEMENT_3D('',#18157,#422,#13051);+#18157=CARTESIAN_POINT('',(7.2,-6.11,0.65));+#18158=ORIENTED_EDGE('',*,*,#18159,.T.);+#18159=EDGE_CURVE('',#18153,#18160,#18162,.T.);+#18160=VERTEX_POINT('',#18161);+#18161=CARTESIAN_POINT('',(7.382385590716,-6.11,0.165270364467));+#18162=LINE('',#18154,#13057);+#18163=ORIENTED_EDGE('',*,*,#18164,.T.);+#18164=EDGE_CURVE('',#18160,#18165,#18167,.T.);+#18165=VERTEX_POINT('',#18166);+#18166=CARTESIAN_POINT('',(7.579347141319,-6.11,1.387778780781E-16));+#18167=CIRCLE('',#18168,0.2);+#18168=AXIS2_PLACEMENT_3D('',#18169,#1569,#13066);+#18169=CARTESIAN_POINT('',(7.579347141319,-6.11,0.2));+#18170=ORIENTED_EDGE('',*,*,#18171,.T.);+#18171=EDGE_CURVE('',#18165,#18172,#18174,.T.);+#18172=VERTEX_POINT('',#18173);+#18173=CARTESIAN_POINT('',(8.,-6.11,1.387778780781E-16));+#18174=LINE('',#18166,#49);+#18175=ORIENTED_EDGE('',*,*,#18176,.T.);+#18176=EDGE_CURVE('',#18172,#18177,#18179,.T.);+#18177=VERTEX_POINT('',#18178);+#18178=CARTESIAN_POINT('',(8.,-6.11,0.1));+#18179=LINE('',#18173,#2043);+#18180=ORIENTED_EDGE('',*,*,#18181,.T.);+#18181=EDGE_CURVE('',#18177,#18182,#18184,.T.);+#18182=VERTEX_POINT('',#18183);+#18183=CARTESIAN_POINT('',(7.579347141319,-6.11,0.1));+#18184=LINE('',#18178,#1576);+#18185=ORIENTED_EDGE('',*,*,#18186,.T.);+#18186=EDGE_CURVE('',#18182,#18187,#18189,.T.);+#18187=VERTEX_POINT('',#18188);+#18188=CARTESIAN_POINT('',(7.480866366018,-6.11,0.182635182233));+#18189=CIRCLE('',#18190,1.E-01);+#18190=AXIS2_PLACEMENT_3D('',#18169,#422,#13088);+#18191=ORIENTED_EDGE('',*,*,#18192,.T.);+#18192=EDGE_CURVE('',#18187,#18193,#18195,.T.);+#18193=VERTEX_POINT('',#18194);+#18194=CARTESIAN_POINT('',(7.396961550602,-6.11,0.684729635533));+#18195=LINE('',#18188,#13094);+#18196=ORIENTED_EDGE('',*,*,#18197,.T.);+#18197=EDGE_CURVE('',#18193,#8417,#18198,.T.);+#18198=CIRCLE('',#18199,0.2);+#18199=AXIS2_PLACEMENT_3D('',#18157,#1569,#13100);+#18200=ORIENTED_EDGE('',*,*,#8416,.T.);+#18201=PLANE('',#18202);+#18202=AXIS2_PLACEMENT_3D('',#18203,#1569,#13);+#18203=CARTESIAN_POINT('',(7.414276639233,-6.11,0.410238158856));+#18204=ADVANCED_FACE('',(#18205),#18266,.T.);+#18205=FACE_BOUND('',#18206,.T.);+#18206=EDGE_LOOP('',(#18207,#18211,#18217,#18224,#18229,#18236,#18241,#18246,#18251,#18257,#18262,#8423));+#18207=ORIENTED_EDGE('',*,*,#18208,.F.);+#18208=EDGE_CURVE('',#13199,#8425,#18209,.T.);+#18209=LINE('',#18210,#2043);+#18210=CARTESIAN_POINT('',(7.,-6.29,0.630119079428));+#18211=ORIENTED_EDGE('',*,*,#18212,.T.);+#18212=EDGE_CURVE('',#13199,#18213,#18215,.T.);+#18213=VERTEX_POINT('',#18214);+#18214=CARTESIAN_POINT('',(7.2,-6.29,0.75));+#18215=LINE('',#18216,#49);+#18216=CARTESIAN_POINT('',(6.85,-6.29,0.75));+#18217=ORIENTED_EDGE('',*,*,#18218,.T.);+#18218=EDGE_CURVE('',#18213,#18219,#18221,.T.);+#18219=VERTEX_POINT('',#18220);+#18220=CARTESIAN_POINT('',(7.298480775301,-6.29,0.667364817767));+#18221=CIRCLE('',#18222,0.1);+#18222=AXIS2_PLACEMENT_3D('',#18223,#422,#13051);+#18223=CARTESIAN_POINT('',(7.2,-6.29,0.65));+#18224=ORIENTED_EDGE('',*,*,#18225,.T.);+#18225=EDGE_CURVE('',#18219,#18226,#18228,.T.);+#18226=VERTEX_POINT('',#18227);+#18227=CARTESIAN_POINT('',(7.382385590716,-6.29,0.165270364467));+#18228=LINE('',#18220,#13057);+#18229=ORIENTED_EDGE('',*,*,#18230,.T.);+#18230=EDGE_CURVE('',#18226,#18231,#18233,.T.);+#18231=VERTEX_POINT('',#18232);+#18232=CARTESIAN_POINT('',(7.579347141319,-6.29,1.387778780781E-16));+#18233=CIRCLE('',#18234,0.2);+#18234=AXIS2_PLACEMENT_3D('',#18235,#1569,#13066);+#18235=CARTESIAN_POINT('',(7.579347141319,-6.29,0.2));+#18236=ORIENTED_EDGE('',*,*,#18237,.T.);+#18237=EDGE_CURVE('',#18231,#18238,#18240,.T.);+#18238=VERTEX_POINT('',#18239);+#18239=CARTESIAN_POINT('',(8.,-6.29,1.387778780781E-16));+#18240=LINE('',#18232,#49);+#18241=ORIENTED_EDGE('',*,*,#18242,.T.);+#18242=EDGE_CURVE('',#18238,#18243,#18245,.T.);+#18243=VERTEX_POINT('',#18244);+#18244=CARTESIAN_POINT('',(8.,-6.29,0.1));+#18245=LINE('',#18239,#2043);+#18246=ORIENTED_EDGE('',*,*,#18247,.T.);+#18247=EDGE_CURVE('',#18243,#18248,#18250,.T.);+#18248=VERTEX_POINT('',#18249);+#18249=CARTESIAN_POINT('',(7.579347141319,-6.29,0.1));+#18250=LINE('',#18244,#1576);+#18251=ORIENTED_EDGE('',*,*,#18252,.T.);+#18252=EDGE_CURVE('',#18248,#18253,#18255,.T.);+#18253=VERTEX_POINT('',#18254);+#18254=CARTESIAN_POINT('',(7.480866366018,-6.29,0.182635182233));+#18255=CIRCLE('',#18256,1.E-01);+#18256=AXIS2_PLACEMENT_3D('',#18235,#422,#13088);+#18257=ORIENTED_EDGE('',*,*,#18258,.T.);+#18258=EDGE_CURVE('',#18253,#18259,#18261,.T.);+#18259=VERTEX_POINT('',#18260);+#18260=CARTESIAN_POINT('',(7.396961550602,-6.29,0.684729635533));+#18261=LINE('',#18254,#13094);+#18262=ORIENTED_EDGE('',*,*,#18263,.T.);+#18263=EDGE_CURVE('',#18259,#8420,#18264,.T.);+#18264=CIRCLE('',#18265,0.2);+#18265=AXIS2_PLACEMENT_3D('',#18223,#1569,#13100);+#18266=PLANE('',#18267);+#18267=AXIS2_PLACEMENT_3D('',#18268,#1569,#13);+#18268=CARTESIAN_POINT('',(7.414276639233,-6.29,0.410238158856));+#18269=ADVANCED_FACE('',(#18270),#18277,.T.);+#18270=FACE_BOUND('',#18271,.F.);+#18271=EDGE_LOOP('',(#18272,#18262,#18275,#18276));+#18272=ORIENTED_EDGE('',*,*,#18273,.T.);+#18273=EDGE_CURVE('',#18193,#18259,#18274,.T.);+#18274=LINE('',#18194,#1568);+#18275=ORIENTED_EDGE('',*,*,#8419,.F.);+#18276=ORIENTED_EDGE('',*,*,#18197,.F.);+#18277=CYLINDRICAL_SURFACE('',#18278,0.2);+#18278=AXIS2_PLACEMENT_3D('',#18157,#422,#13100);+#18279=ADVANCED_FACE('',(#18280),#18301,.F.);+#18280=FACE_BOUND('',#18281,.F.);+#18281=EDGE_LOOP('',(#18282,#18285,#18292,#18297,#18299,#18300));+#18282=ORIENTED_EDGE('',*,*,#18283,.F.);+#18283=EDGE_CURVE('',#18284,#8449,#8456,.T.);+#18284=VERTEX_POINT('',#8457);+#18285=ORIENTED_EDGE('',*,*,#18286,.T.);+#18286=EDGE_CURVE('',#18284,#18287,#18289,.T.);+#18287=VERTEX_POINT('',#18288);+#18288=CARTESIAN_POINT('',(6.11,-7.2,0.85));+#18289=LINE('',#8457,#18290);+#18290=VECTOR('',#18291,1.);+#18291=DIRECTION('',(-1.,1.110223024625E-16,0.));+#18292=ORIENTED_EDGE('',*,*,#18293,.T.);+#18293=EDGE_CURVE('',#18287,#18294,#18296,.T.);+#18294=VERTEX_POINT('',#18295);+#18295=CARTESIAN_POINT('',(6.11,-7.,0.85));+#18296=LINE('',#18288,#8458);+#18297=ORIENTED_EDGE('',*,*,#18298,.T.);+#18298=EDGE_CURVE('',#18294,#13472,#18296,.T.);+#18299=ORIENTED_EDGE('',*,*,#13471,.F.);+#18300=ORIENTED_EDGE('',*,*,#8453,.F.);+#18301=PLANE('',#18302);+#18302=AXIS2_PLACEMENT_3D('',#8457,#464,#8459);+#18303=ADVANCED_FACE('',(#18304),#18321,.F.);+#18304=FACE_BOUND('',#18305,.F.);+#18305=EDGE_LOOP('',(#18306,#18311,#18316,#18320));+#18306=ORIENTED_EDGE('',*,*,#18307,.F.);+#18307=EDGE_CURVE('',#18308,#8444,#18310,.T.);+#18308=VERTEX_POINT('',#18309);+#18309=CARTESIAN_POINT('',(6.825,-7.,0.75));+#18310=B_SPLINE_CURVE_WITH_KNOTS('',1,(#18309,#8445),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#18311=ORIENTED_EDGE('',*,*,#18312,.T.);+#18312=EDGE_CURVE('',#18308,#18313,#18315,.T.);+#18313=VERTEX_POINT('',#18314);+#18314=CARTESIAN_POINT('',(6.29,-7.,0.75));+#18315=LINE('',#18309,#1576);+#18316=ORIENTED_EDGE('',*,*,#18317,.T.);+#18317=EDGE_CURVE('',#18313,#8449,#18318,.T.);+#18318=LINE('',#18319,#2043);+#18319=CARTESIAN_POINT('',(6.29,-7.,0.630119079428));+#18320=ORIENTED_EDGE('',*,*,#8448,.F.);+#18321=PLANE('',#18322);+#18322=AXIS2_PLACEMENT_3D('',#8445,#422,#1577);+#18323=ADVANCED_FACE('',(#18324),#18334,.F.);+#18324=FACE_BOUND('',#18325,.F.);+#18325=EDGE_LOOP('',(#18326,#18329,#18330,#18331));+#18326=ORIENTED_EDGE('',*,*,#18327,.T.);+#18327=EDGE_CURVE('',#13194,#18308,#18328,.T.);+#18328=LINE('',#13195,#7319);+#18329=ORIENTED_EDGE('',*,*,#18307,.T.);+#18330=ORIENTED_EDGE('',*,*,#8443,.F.);+#18331=ORIENTED_EDGE('',*,*,#18332,.F.);+#18332=EDGE_CURVE('',#13194,#8440,#18333,.T.);+#18333=B_SPLINE_CURVE_WITH_KNOTS('',1,(#13195,#8441),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#18334=PLANE('',#18335);+#18335=AXIS2_PLACEMENT_3D('',#8441,#9043,#7288);+#18336=ADVANCED_FACE('',(#18337),#7271,.F.);+#18337=FACE_BOUND('',#18338,.F.);+#18338=EDGE_LOOP('',(#18207,#18339,#18340,#18341));+#18339=ORIENTED_EDGE('',*,*,#13198,.T.);+#18340=ORIENTED_EDGE('',*,*,#18332,.T.);+#18341=ORIENTED_EDGE('',*,*,#8439,.F.);+#18342=ADVANCED_FACE('',(#18343),#18358,.F.);+#18343=FACE_BOUND('',#18344,.T.);+#18344=EDGE_LOOP('',(#10141,#13457,#13185,#18345,#18350,#18355,#8669,#8578));+#18345=ORIENTED_EDGE('',*,*,#18346,.T.);+#18346=EDGE_CURVE('',#13189,#18347,#18349,.T.);+#18347=VERTEX_POINT('',#18348);+#18348=CARTESIAN_POINT('',(6.755919117457,-6.861838234914,0.1));+#18349=LINE('',#13190,#7319);+#18350=ORIENTED_EDGE('',*,*,#18351,.T.);+#18351=EDGE_CURVE('',#18347,#18352,#18354,.T.);+#18352=VERTEX_POINT('',#18353);+#18353=CARTESIAN_POINT('',(-6.755919117457,-6.861838234914,0.1));+#18354=LINE('',#18348,#1576);+#18355=ORIENTED_EDGE('',*,*,#18356,.T.);+#18356=EDGE_CURVE('',#18352,#8671,#18357,.T.);+#18357=LINE('',#18353,#9042);+#18358=PLANE('',#18359);+#18359=AXIS2_PLACEMENT_3D('',#8583,#13,#18360);+#18360=DIRECTION('',(0.701585672444,-0.712585113668,0.));+#18361=ADVANCED_FACE('',(#18362),#18369,.F.);+#18362=FACE_BOUND('',#18363,.F.);+#18363=EDGE_LOOP('',(#18364,#8651,#18367,#18368));+#18364=ORIENTED_EDGE('',*,*,#18365,.T.);+#18365=EDGE_CURVE('',#8984,#8646,#18366,.T.);+#18366=LINE('',#8985,#2066);+#18367=ORIENTED_EDGE('',*,*,#9018,.F.);+#18368=ORIENTED_EDGE('',*,*,#8989,.F.);+#18369=PLANE('',#18370);+#18370=AXIS2_PLACEMENT_3D('',#8985,#18371,#8657);+#18371=DIRECTION('',(0.986322983713,-1.128587986944E-17,-0.16482406317));+#18372=ADVANCED_FACE('',(#18373),#18380,.F.);+#18373=FACE_BOUND('',#18374,.F.);+#18374=EDGE_LOOP('',(#18375,#8644,#18378,#18379));+#18375=ORIENTED_EDGE('',*,*,#18376,.T.);+#18376=EDGE_CURVE('',#8979,#8641,#18377,.T.);+#18377=LINE('',#8980,#2066);+#18378=ORIENTED_EDGE('',*,*,#18365,.F.);+#18379=ORIENTED_EDGE('',*,*,#8983,.F.);+#18380=CYLINDRICAL_SURFACE('',#8987,1.E-01);+#18381=ADVANCED_FACE('',(#18382),#18389,.F.);+#18382=FACE_BOUND('',#18383,.F.);+#18383=EDGE_LOOP('',(#18384,#8639,#18387,#18388));+#18384=ORIENTED_EDGE('',*,*,#18385,.T.);+#18385=EDGE_CURVE('',#8974,#8636,#18386,.T.);+#18386=LINE('',#8975,#2066);+#18387=ORIENTED_EDGE('',*,*,#18376,.F.);+#18388=ORIENTED_EDGE('',*,*,#8978,.F.);+#18389=PLANE('',#18390);+#18390=AXIS2_PLACEMENT_3D('',#8975,#464,#430);+#18391=ADVANCED_FACE('',(#18392),#18399,.F.);+#18392=FACE_BOUND('',#18393,.F.);+#18393=EDGE_LOOP('',(#18394,#8634,#18397,#18398));+#18394=ORIENTED_EDGE('',*,*,#18395,.T.);+#18395=EDGE_CURVE('',#8969,#8631,#18396,.T.);+#18396=LINE('',#8970,#2066);+#18397=ORIENTED_EDGE('',*,*,#18385,.F.);+#18398=ORIENTED_EDGE('',*,*,#8973,.F.);+#18399=PLANE('',#18400);+#18400=AXIS2_PLACEMENT_3D('',#8970,#430,#13);+#18401=ADVANCED_FACE('',(#18402),#18409,.F.);+#18402=FACE_BOUND('',#18403,.F.);+#18403=EDGE_LOOP('',(#18404,#8629,#18407,#18408));+#18404=ORIENTED_EDGE('',*,*,#18405,.T.);+#18405=EDGE_CURVE('',#8962,#8622,#18406,.T.);+#18406=LINE('',#8963,#2066);+#18407=ORIENTED_EDGE('',*,*,#18395,.F.);+#18408=ORIENTED_EDGE('',*,*,#8968,.F.);+#18409=PLANE('',#18410);+#18410=AXIS2_PLACEMENT_3D('',#8963,#13,#8603);+#18411=ADVANCED_FACE('',(#18412),#18419,.T.);+#18412=FACE_BOUND('',#18413,.F.);+#18413=EDGE_LOOP('',(#18414,#8620,#18417,#18418));+#18414=ORIENTED_EDGE('',*,*,#18415,.T.);+#18415=EDGE_CURVE('',#8957,#8615,#18416,.T.);+#18416=LINE('',#8958,#2066);+#18417=ORIENTED_EDGE('',*,*,#18405,.F.);+#18418=ORIENTED_EDGE('',*,*,#8961,.F.);+#18419=CYLINDRICAL_SURFACE('',#18420,0.2);+#18420=AXIS2_PLACEMENT_3D('',#8966,#8611,#8628);+#18421=ADVANCED_FACE('',(#18422),#18429,.F.);+#18422=FACE_BOUND('',#18423,.F.);+#18423=EDGE_LOOP('',(#18424,#8613,#18427,#18428));+#18424=ORIENTED_EDGE('',*,*,#18425,.T.);+#18425=EDGE_CURVE('',#8950,#8606,#18426,.T.);+#18426=LINE('',#8951,#2066);+#18427=ORIENTED_EDGE('',*,*,#18415,.F.);+#18428=ORIENTED_EDGE('',*,*,#8956,.F.);+#18429=PLANE('',#18430);+#18430=AXIS2_PLACEMENT_3D('',#8951,#18431,#8619);+#18431=DIRECTION('',(-0.986322983713,1.128587986944E-17,0.16482406317));+#18432=ADVANCED_FACE('',(#18433),#18440,.F.);+#18433=FACE_BOUND('',#18434,.F.);+#18434=EDGE_LOOP('',(#18435,#8604,#18438,#18439));+#18435=ORIENTED_EDGE('',*,*,#18436,.T.);+#18436=EDGE_CURVE('',#8944,#8598,#18437,.T.);+#18437=LINE('',#8945,#2066);+#18438=ORIENTED_EDGE('',*,*,#18425,.F.);+#18439=ORIENTED_EDGE('',*,*,#8949,.F.);+#18440=CYLINDRICAL_SURFACE('',#8953,0.1);+#18441=ADVANCED_FACE('',(#18442),#18447,.F.);+#18442=FACE_BOUND('',#18443,.F.);+#18443=EDGE_LOOP('',(#18444,#18445,#8596,#18446));+#18444=ORIENTED_EDGE('',*,*,#8943,.F.);+#18445=ORIENTED_EDGE('',*,*,#8677,.T.);+#18446=ORIENTED_EDGE('',*,*,#18436,.F.);+#18447=PLANE('',#18448);+#18448=AXIS2_PLACEMENT_3D('',#8947,#13,#8603);+#18449=ADVANCED_FACE('',(#18450),#2050,.F.);+#18450=FACE_BOUND('',#18451,.F.);+#18451=EDGE_LOOP('',(#18452,#18455,#18456,#18460));+#18452=ORIENTED_EDGE('',*,*,#18453,.F.);+#18453=EDGE_CURVE('',#8930,#9029,#18454,.T.);+#18454=B_SPLINE_CURVE_WITH_KNOTS('',1,(#2047,#434),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#18455=ORIENTED_EDGE('',*,*,#8929,.T.);+#18456=ORIENTED_EDGE('',*,*,#18457,.T.);+#18457=EDGE_CURVE('',#8926,#9030,#18458,.T.);+#18458=LINE('',#18459,#2043);+#18459=CARTESIAN_POINT('',(-7.,-6.29,0.630119079428));+#18460=ORIENTED_EDGE('',*,*,#9028,.F.);+#18461=ADVANCED_FACE('',(#18462),#18480,.F.);+#18462=FACE_BOUND('',#18463,.F.);+#18463=EDGE_LOOP('',(#18464,#18470,#18471,#18477));+#18464=ORIENTED_EDGE('',*,*,#18465,.F.);+#18465=EDGE_CURVE('',#8926,#18466,#18468,.T.);+#18466=VERTEX_POINT('',#18467);+#18467=CARTESIAN_POINT('',(-7.2,-6.29,0.75));+#18468=LINE('',#18469,#8602);+#18469=CARTESIAN_POINT('',(-6.85,-6.29,0.75));+#18470=ORIENTED_EDGE('',*,*,#8925,.T.);+#18471=ORIENTED_EDGE('',*,*,#18472,.T.);+#18472=EDGE_CURVE('',#8922,#18473,#18475,.T.);+#18473=VERTEX_POINT('',#18474);+#18474=CARTESIAN_POINT('',(-7.2,-6.11,0.75));+#18475=LINE('',#18476,#8602);+#18476=CARTESIAN_POINT('',(-6.85,-6.11,0.75));+#18477=ORIENTED_EDGE('',*,*,#18478,.F.);+#18478=EDGE_CURVE('',#18466,#18473,#18479,.T.);+#18479=LINE('',#18467,#2066);+#18480=PLANE('',#18481);+#18481=AXIS2_PLACEMENT_3D('',#18469,#13,#8603);+#18482=ADVANCED_FACE('',(#18483),#2050,.F.);+#18483=FACE_BOUND('',#18484,.F.);+#18484=EDGE_LOOP('',(#18485,#18489,#18490,#18494));+#18485=ORIENTED_EDGE('',*,*,#18486,.F.);+#18486=EDGE_CURVE('',#8922,#9074,#18487,.T.);+#18487=LINE('',#18488,#2043);+#18488=CARTESIAN_POINT('',(-7.,-6.11,0.630119079428));+#18489=ORIENTED_EDGE('',*,*,#8921,.T.);+#18490=ORIENTED_EDGE('',*,*,#18491,.T.);+#18491=EDGE_CURVE('',#8918,#9088,#18492,.T.);+#18492=LINE('',#18493,#2043);+#18493=CARTESIAN_POINT('',(-7.,-5.89,0.630119079428));+#18494=ORIENTED_EDGE('',*,*,#9087,.F.);+#18495=ADVANCED_FACE('',(#18496),#18514,.F.);+#18496=FACE_BOUND('',#18497,.F.);+#18497=EDGE_LOOP('',(#18498,#18504,#18505,#18511));+#18498=ORIENTED_EDGE('',*,*,#18499,.F.);+#18499=EDGE_CURVE('',#8918,#18500,#18502,.T.);+#18500=VERTEX_POINT('',#18501);+#18501=CARTESIAN_POINT('',(-7.2,-5.89,0.75));+#18502=LINE('',#18503,#8602);+#18503=CARTESIAN_POINT('',(-6.85,-5.89,0.75));+#18504=ORIENTED_EDGE('',*,*,#8917,.T.);+#18505=ORIENTED_EDGE('',*,*,#18506,.T.);+#18506=EDGE_CURVE('',#8914,#18507,#18509,.T.);+#18507=VERTEX_POINT('',#18508);+#18508=CARTESIAN_POINT('',(-7.2,-5.71,0.75));+#18509=LINE('',#18510,#8602);+#18510=CARTESIAN_POINT('',(-6.85,-5.71,0.75));+#18511=ORIENTED_EDGE('',*,*,#18512,.F.);+#18512=EDGE_CURVE('',#18500,#18507,#18513,.T.);+#18513=LINE('',#18501,#2066);+#18514=PLANE('',#18515);+#18515=AXIS2_PLACEMENT_3D('',#18503,#13,#8603);+#18516=ADVANCED_FACE('',(#18517),#2050,.F.);+#18517=FACE_BOUND('',#18518,.F.);+#18518=EDGE_LOOP('',(#18519,#18523,#18524,#18528));+#18519=ORIENTED_EDGE('',*,*,#18520,.F.);+#18520=EDGE_CURVE('',#8914,#9109,#18521,.T.);+#18521=LINE('',#18522,#2043);+#18522=CARTESIAN_POINT('',(-7.,-5.71,0.630119079428));+#18523=ORIENTED_EDGE('',*,*,#8913,.T.);+#18524=ORIENTED_EDGE('',*,*,#18525,.T.);+#18525=EDGE_CURVE('',#8910,#9123,#18526,.T.);+#18526=LINE('',#18527,#2043);+#18527=CARTESIAN_POINT('',(-7.,-5.49,0.630119079428));+#18528=ORIENTED_EDGE('',*,*,#9122,.F.);+#18529=ADVANCED_FACE('',(#18530),#18548,.F.);+#18530=FACE_BOUND('',#18531,.F.);+#18531=EDGE_LOOP('',(#18532,#18538,#18539,#18545));+#18532=ORIENTED_EDGE('',*,*,#18533,.F.);+#18533=EDGE_CURVE('',#8910,#18534,#18536,.T.);+#18534=VERTEX_POINT('',#18535);+#18535=CARTESIAN_POINT('',(-7.2,-5.49,0.75));+#18536=LINE('',#18537,#8602);+#18537=CARTESIAN_POINT('',(-6.85,-5.49,0.75));+#18538=ORIENTED_EDGE('',*,*,#8909,.T.);+#18539=ORIENTED_EDGE('',*,*,#18540,.T.);+#18540=EDGE_CURVE('',#8906,#18541,#18543,.T.);+#18541=VERTEX_POINT('',#18542);+#18542=CARTESIAN_POINT('',(-7.2,-5.31,0.75));+#18543=LINE('',#18544,#8602);+#18544=CARTESIAN_POINT('',(-6.85,-5.31,0.75));+#18545=ORIENTED_EDGE('',*,*,#18546,.F.);+#18546=EDGE_CURVE('',#18534,#18541,#18547,.T.);+#18547=LINE('',#18535,#2066);+#18548=PLANE('',#18549);+#18549=AXIS2_PLACEMENT_3D('',#18537,#13,#8603);+#18550=ADVANCED_FACE('',(#18551),#2050,.F.);+#18551=FACE_BOUND('',#18552,.F.);+#18552=EDGE_LOOP('',(#18553,#18557,#18558,#18562));+#18553=ORIENTED_EDGE('',*,*,#18554,.F.);+#18554=EDGE_CURVE('',#8906,#9144,#18555,.T.);+#18555=LINE('',#18556,#2043);+#18556=CARTESIAN_POINT('',(-7.,-5.31,0.630119079428));+#18557=ORIENTED_EDGE('',*,*,#8905,.T.);+#18558=ORIENTED_EDGE('',*,*,#18559,.T.);+#18559=EDGE_CURVE('',#8902,#9158,#18560,.T.);+#18560=LINE('',#18561,#2043);+#18561=CARTESIAN_POINT('',(-7.,-5.09,0.630119079428));+#18562=ORIENTED_EDGE('',*,*,#9157,.F.);+#18563=ADVANCED_FACE('',(#18564),#18582,.F.);+#18564=FACE_BOUND('',#18565,.F.);+#18565=EDGE_LOOP('',(#18566,#18572,#18573,#18579));+#18566=ORIENTED_EDGE('',*,*,#18567,.F.);+#18567=EDGE_CURVE('',#8902,#18568,#18570,.T.);+#18568=VERTEX_POINT('',#18569);+#18569=CARTESIAN_POINT('',(-7.2,-5.09,0.75));+#18570=LINE('',#18571,#8602);+#18571=CARTESIAN_POINT('',(-6.85,-5.09,0.75));+#18572=ORIENTED_EDGE('',*,*,#8901,.T.);+#18573=ORIENTED_EDGE('',*,*,#18574,.T.);+#18574=EDGE_CURVE('',#8898,#18575,#18577,.T.);+#18575=VERTEX_POINT('',#18576);+#18576=CARTESIAN_POINT('',(-7.2,-4.91,0.75));+#18577=LINE('',#18578,#8602);+#18578=CARTESIAN_POINT('',(-6.85,-4.91,0.75));+#18579=ORIENTED_EDGE('',*,*,#18580,.F.);+#18580=EDGE_CURVE('',#18568,#18575,#18581,.T.);+#18581=LINE('',#18569,#2066);+#18582=PLANE('',#18583);+#18583=AXIS2_PLACEMENT_3D('',#18571,#13,#8603);+#18584=ADVANCED_FACE('',(#18585),#2050,.F.);+#18585=FACE_BOUND('',#18586,.F.);+#18586=EDGE_LOOP('',(#18587,#18591,#18592,#18596));+#18587=ORIENTED_EDGE('',*,*,#18588,.F.);+#18588=EDGE_CURVE('',#8898,#9179,#18589,.T.);+#18589=LINE('',#18590,#2043);+#18590=CARTESIAN_POINT('',(-7.,-4.91,0.630119079428));+#18591=ORIENTED_EDGE('',*,*,#8897,.T.);+#18592=ORIENTED_EDGE('',*,*,#18593,.T.);+#18593=EDGE_CURVE('',#8894,#9193,#18594,.T.);+#18594=LINE('',#18595,#2043);+#18595=CARTESIAN_POINT('',(-7.,-4.69,0.630119079428));+#18596=ORIENTED_EDGE('',*,*,#9192,.F.);+#18597=ADVANCED_FACE('',(#18598),#18616,.F.);+#18598=FACE_BOUND('',#18599,.F.);+#18599=EDGE_LOOP('',(#18600,#18606,#18607,#18613));+#18600=ORIENTED_EDGE('',*,*,#18601,.F.);+#18601=EDGE_CURVE('',#8894,#18602,#18604,.T.);+#18602=VERTEX_POINT('',#18603);+#18603=CARTESIAN_POINT('',(-7.2,-4.69,0.75));+#18604=LINE('',#18605,#8602);+#18605=CARTESIAN_POINT('',(-6.85,-4.69,0.75));+#18606=ORIENTED_EDGE('',*,*,#8893,.T.);+#18607=ORIENTED_EDGE('',*,*,#18608,.T.);+#18608=EDGE_CURVE('',#8890,#18609,#18611,.T.);+#18609=VERTEX_POINT('',#18610);+#18610=CARTESIAN_POINT('',(-7.2,-4.51,0.75));+#18611=LINE('',#18612,#8602);+#18612=CARTESIAN_POINT('',(-6.85,-4.51,0.75));+#18613=ORIENTED_EDGE('',*,*,#18614,.F.);+#18614=EDGE_CURVE('',#18602,#18609,#18615,.T.);+#18615=LINE('',#18603,#2066);+#18616=PLANE('',#18617);+#18617=AXIS2_PLACEMENT_3D('',#18605,#13,#8603);+#18618=ADVANCED_FACE('',(#18619),#2050,.F.);+#18619=FACE_BOUND('',#18620,.F.);+#18620=EDGE_LOOP('',(#18621,#18625,#18626,#18630));+#18621=ORIENTED_EDGE('',*,*,#18622,.F.);+#18622=EDGE_CURVE('',#8890,#9214,#18623,.T.);+#18623=LINE('',#18624,#2043);+#18624=CARTESIAN_POINT('',(-7.,-4.51,0.630119079428));+#18625=ORIENTED_EDGE('',*,*,#8889,.T.);+#18626=ORIENTED_EDGE('',*,*,#18627,.T.);+#18627=EDGE_CURVE('',#8886,#9228,#18628,.T.);+#18628=LINE('',#18629,#2043);+#18629=CARTESIAN_POINT('',(-7.,-4.29,0.630119079428));+#18630=ORIENTED_EDGE('',*,*,#9227,.F.);+#18631=ADVANCED_FACE('',(#18632),#18650,.F.);+#18632=FACE_BOUND('',#18633,.F.);+#18633=EDGE_LOOP('',(#18634,#18640,#18641,#18647));+#18634=ORIENTED_EDGE('',*,*,#18635,.F.);+#18635=EDGE_CURVE('',#8886,#18636,#18638,.T.);+#18636=VERTEX_POINT('',#18637);+#18637=CARTESIAN_POINT('',(-7.2,-4.29,0.75));+#18638=LINE('',#18639,#8602);+#18639=CARTESIAN_POINT('',(-6.85,-4.29,0.75));+#18640=ORIENTED_EDGE('',*,*,#8885,.T.);+#18641=ORIENTED_EDGE('',*,*,#18642,.T.);+#18642=EDGE_CURVE('',#8882,#18643,#18645,.T.);+#18643=VERTEX_POINT('',#18644);+#18644=CARTESIAN_POINT('',(-7.2,-4.11,0.75));+#18645=LINE('',#18646,#8602);+#18646=CARTESIAN_POINT('',(-6.85,-4.11,0.75));+#18647=ORIENTED_EDGE('',*,*,#18648,.F.);+#18648=EDGE_CURVE('',#18636,#18643,#18649,.T.);+#18649=LINE('',#18637,#2066);+#18650=PLANE('',#18651);+#18651=AXIS2_PLACEMENT_3D('',#18639,#13,#8603);+#18652=ADVANCED_FACE('',(#18653),#2050,.F.);+#18653=FACE_BOUND('',#18654,.F.);+#18654=EDGE_LOOP('',(#18655,#18659,#18660,#18664));+#18655=ORIENTED_EDGE('',*,*,#18656,.F.);+#18656=EDGE_CURVE('',#8882,#9249,#18657,.T.);+#18657=LINE('',#18658,#2043);+#18658=CARTESIAN_POINT('',(-7.,-4.11,0.630119079428));+#18659=ORIENTED_EDGE('',*,*,#8881,.T.);+#18660=ORIENTED_EDGE('',*,*,#18661,.T.);+#18661=EDGE_CURVE('',#8878,#9263,#18662,.T.);+#18662=LINE('',#18663,#2043);+#18663=CARTESIAN_POINT('',(-7.,-3.89,0.630119079428));+#18664=ORIENTED_EDGE('',*,*,#9262,.F.);+#18665=ADVANCED_FACE('',(#18666),#18684,.F.);+#18666=FACE_BOUND('',#18667,.F.);+#18667=EDGE_LOOP('',(#18668,#18674,#18675,#18681));+#18668=ORIENTED_EDGE('',*,*,#18669,.F.);+#18669=EDGE_CURVE('',#8878,#18670,#18672,.T.);+#18670=VERTEX_POINT('',#18671);+#18671=CARTESIAN_POINT('',(-7.2,-3.89,0.75));+#18672=LINE('',#18673,#8602);+#18673=CARTESIAN_POINT('',(-6.85,-3.89,0.75));+#18674=ORIENTED_EDGE('',*,*,#8877,.T.);+#18675=ORIENTED_EDGE('',*,*,#18676,.T.);+#18676=EDGE_CURVE('',#8874,#18677,#18679,.T.);+#18677=VERTEX_POINT('',#18678);+#18678=CARTESIAN_POINT('',(-7.2,-3.71,0.75));+#18679=LINE('',#18680,#8602);+#18680=CARTESIAN_POINT('',(-6.85,-3.71,0.75));+#18681=ORIENTED_EDGE('',*,*,#18682,.F.);+#18682=EDGE_CURVE('',#18670,#18677,#18683,.T.);+#18683=LINE('',#18671,#2066);+#18684=PLANE('',#18685);+#18685=AXIS2_PLACEMENT_3D('',#18673,#13,#8603);+#18686=ADVANCED_FACE('',(#18687),#2050,.F.);+#18687=FACE_BOUND('',#18688,.F.);+#18688=EDGE_LOOP('',(#18689,#18693,#18694,#18698));+#18689=ORIENTED_EDGE('',*,*,#18690,.F.);+#18690=EDGE_CURVE('',#8874,#9284,#18691,.T.);+#18691=LINE('',#18692,#2043);+#18692=CARTESIAN_POINT('',(-7.,-3.71,0.630119079428));+#18693=ORIENTED_EDGE('',*,*,#8873,.T.);+#18694=ORIENTED_EDGE('',*,*,#18695,.T.);+#18695=EDGE_CURVE('',#8870,#9298,#18696,.T.);+#18696=LINE('',#18697,#2043);+#18697=CARTESIAN_POINT('',(-7.,-3.49,0.630119079428));+#18698=ORIENTED_EDGE('',*,*,#9297,.F.);+#18699=ADVANCED_FACE('',(#18700),#18718,.F.);+#18700=FACE_BOUND('',#18701,.F.);+#18701=EDGE_LOOP('',(#18702,#18708,#18709,#18715));+#18702=ORIENTED_EDGE('',*,*,#18703,.F.);+#18703=EDGE_CURVE('',#8870,#18704,#18706,.T.);+#18704=VERTEX_POINT('',#18705);+#18705=CARTESIAN_POINT('',(-7.2,-3.49,0.75));+#18706=LINE('',#18707,#8602);+#18707=CARTESIAN_POINT('',(-6.85,-3.49,0.75));+#18708=ORIENTED_EDGE('',*,*,#8869,.T.);+#18709=ORIENTED_EDGE('',*,*,#18710,.T.);+#18710=EDGE_CURVE('',#8866,#18711,#18713,.T.);+#18711=VERTEX_POINT('',#18712);+#18712=CARTESIAN_POINT('',(-7.2,-3.31,0.75));+#18713=LINE('',#18714,#8602);+#18714=CARTESIAN_POINT('',(-6.85,-3.31,0.75));+#18715=ORIENTED_EDGE('',*,*,#18716,.F.);+#18716=EDGE_CURVE('',#18704,#18711,#18717,.T.);+#18717=LINE('',#18705,#2066);+#18718=PLANE('',#18719);+#18719=AXIS2_PLACEMENT_3D('',#18707,#13,#8603);+#18720=ADVANCED_FACE('',(#18721),#2050,.F.);+#18721=FACE_BOUND('',#18722,.F.);+#18722=EDGE_LOOP('',(#18723,#18727,#18728,#18732));+#18723=ORIENTED_EDGE('',*,*,#18724,.F.);+#18724=EDGE_CURVE('',#8866,#9319,#18725,.T.);+#18725=LINE('',#18726,#2043);+#18726=CARTESIAN_POINT('',(-7.,-3.31,0.630119079428));+#18727=ORIENTED_EDGE('',*,*,#8865,.T.);+#18728=ORIENTED_EDGE('',*,*,#18729,.T.);+#18729=EDGE_CURVE('',#8862,#9333,#18730,.T.);+#18730=LINE('',#18731,#2043);+#18731=CARTESIAN_POINT('',(-7.,-3.09,0.630119079428));+#18732=ORIENTED_EDGE('',*,*,#9332,.F.);+#18733=ADVANCED_FACE('',(#18734),#18752,.F.);+#18734=FACE_BOUND('',#18735,.F.);+#18735=EDGE_LOOP('',(#18736,#18742,#18743,#18749));+#18736=ORIENTED_EDGE('',*,*,#18737,.F.);+#18737=EDGE_CURVE('',#8862,#18738,#18740,.T.);+#18738=VERTEX_POINT('',#18739);+#18739=CARTESIAN_POINT('',(-7.2,-3.09,0.75));+#18740=LINE('',#18741,#8602);+#18741=CARTESIAN_POINT('',(-6.85,-3.09,0.75));+#18742=ORIENTED_EDGE('',*,*,#8861,.T.);+#18743=ORIENTED_EDGE('',*,*,#18744,.T.);+#18744=EDGE_CURVE('',#8858,#18745,#18747,.T.);+#18745=VERTEX_POINT('',#18746);+#18746=CARTESIAN_POINT('',(-7.2,-2.91,0.75));+#18747=LINE('',#18748,#8602);+#18748=CARTESIAN_POINT('',(-6.85,-2.91,0.75));+#18749=ORIENTED_EDGE('',*,*,#18750,.F.);+#18750=EDGE_CURVE('',#18738,#18745,#18751,.T.);+#18751=LINE('',#18739,#2066);+#18752=PLANE('',#18753);+#18753=AXIS2_PLACEMENT_3D('',#18741,#13,#8603);+#18754=ADVANCED_FACE('',(#18755),#2050,.F.);+#18755=FACE_BOUND('',#18756,.F.);+#18756=EDGE_LOOP('',(#18757,#18761,#18762,#18766));+#18757=ORIENTED_EDGE('',*,*,#18758,.F.);+#18758=EDGE_CURVE('',#8858,#9354,#18759,.T.);+#18759=LINE('',#18760,#2043);+#18760=CARTESIAN_POINT('',(-7.,-2.91,0.630119079428));+#18761=ORIENTED_EDGE('',*,*,#8857,.T.);+#18762=ORIENTED_EDGE('',*,*,#18763,.T.);+#18763=EDGE_CURVE('',#8854,#9368,#18764,.T.);+#18764=LINE('',#18765,#2043);+#18765=CARTESIAN_POINT('',(-7.,-2.69,0.630119079428));+#18766=ORIENTED_EDGE('',*,*,#9367,.F.);+#18767=ADVANCED_FACE('',(#18768),#18786,.F.);+#18768=FACE_BOUND('',#18769,.F.);+#18769=EDGE_LOOP('',(#18770,#18776,#18777,#18783));+#18770=ORIENTED_EDGE('',*,*,#18771,.F.);+#18771=EDGE_CURVE('',#8854,#18772,#18774,.T.);+#18772=VERTEX_POINT('',#18773);+#18773=CARTESIAN_POINT('',(-7.2,-2.69,0.75));+#18774=LINE('',#18775,#8602);+#18775=CARTESIAN_POINT('',(-6.85,-2.69,0.75));+#18776=ORIENTED_EDGE('',*,*,#8853,.T.);+#18777=ORIENTED_EDGE('',*,*,#18778,.T.);+#18778=EDGE_CURVE('',#8850,#18779,#18781,.T.);+#18779=VERTEX_POINT('',#18780);+#18780=CARTESIAN_POINT('',(-7.2,-2.51,0.75));+#18781=LINE('',#18782,#8602);+#18782=CARTESIAN_POINT('',(-6.85,-2.51,0.75));+#18783=ORIENTED_EDGE('',*,*,#18784,.F.);+#18784=EDGE_CURVE('',#18772,#18779,#18785,.T.);+#18785=LINE('',#18773,#2066);+#18786=PLANE('',#18787);+#18787=AXIS2_PLACEMENT_3D('',#18775,#13,#8603);+#18788=ADVANCED_FACE('',(#18789),#2050,.F.);+#18789=FACE_BOUND('',#18790,.F.);+#18790=EDGE_LOOP('',(#18791,#18795,#18796,#18800));+#18791=ORIENTED_EDGE('',*,*,#18792,.F.);+#18792=EDGE_CURVE('',#8850,#9389,#18793,.T.);+#18793=LINE('',#18794,#2043);+#18794=CARTESIAN_POINT('',(-7.,-2.51,0.630119079428));+#18795=ORIENTED_EDGE('',*,*,#8849,.T.);+#18796=ORIENTED_EDGE('',*,*,#18797,.T.);+#18797=EDGE_CURVE('',#8846,#9403,#18798,.T.);+#18798=LINE('',#18799,#2043);+#18799=CARTESIAN_POINT('',(-7.,-2.29,0.630119079428));+#18800=ORIENTED_EDGE('',*,*,#9402,.F.);+#18801=ADVANCED_FACE('',(#18802),#18820,.F.);+#18802=FACE_BOUND('',#18803,.F.);+#18803=EDGE_LOOP('',(#18804,#18810,#18811,#18817));+#18804=ORIENTED_EDGE('',*,*,#18805,.F.);+#18805=EDGE_CURVE('',#8846,#18806,#18808,.T.);+#18806=VERTEX_POINT('',#18807);+#18807=CARTESIAN_POINT('',(-7.2,-2.29,0.75));+#18808=LINE('',#18809,#8602);+#18809=CARTESIAN_POINT('',(-6.85,-2.29,0.75));+#18810=ORIENTED_EDGE('',*,*,#8845,.T.);+#18811=ORIENTED_EDGE('',*,*,#18812,.T.);+#18812=EDGE_CURVE('',#8842,#18813,#18815,.T.);+#18813=VERTEX_POINT('',#18814);+#18814=CARTESIAN_POINT('',(-7.2,-2.11,0.75));+#18815=LINE('',#18816,#8602);+#18816=CARTESIAN_POINT('',(-6.85,-2.11,0.75));+#18817=ORIENTED_EDGE('',*,*,#18818,.F.);+#18818=EDGE_CURVE('',#18806,#18813,#18819,.T.);+#18819=LINE('',#18807,#2066);+#18820=PLANE('',#18821);+#18821=AXIS2_PLACEMENT_3D('',#18809,#13,#8603);+#18822=ADVANCED_FACE('',(#18823),#2050,.F.);+#18823=FACE_BOUND('',#18824,.F.);+#18824=EDGE_LOOP('',(#18825,#18829,#18830,#18834));+#18825=ORIENTED_EDGE('',*,*,#18826,.F.);+#18826=EDGE_CURVE('',#8842,#9424,#18827,.T.);+#18827=LINE('',#18828,#2043);+#18828=CARTESIAN_POINT('',(-7.,-2.11,0.630119079428));+#18829=ORIENTED_EDGE('',*,*,#8841,.T.);+#18830=ORIENTED_EDGE('',*,*,#18831,.T.);+#18831=EDGE_CURVE('',#8838,#9438,#18832,.T.);+#18832=LINE('',#18833,#2043);+#18833=CARTESIAN_POINT('',(-7.,-1.89,0.630119079428));+#18834=ORIENTED_EDGE('',*,*,#9437,.F.);+#18835=ADVANCED_FACE('',(#18836),#18854,.F.);+#18836=FACE_BOUND('',#18837,.F.);+#18837=EDGE_LOOP('',(#18838,#18844,#18845,#18851));+#18838=ORIENTED_EDGE('',*,*,#18839,.F.);+#18839=EDGE_CURVE('',#8838,#18840,#18842,.T.);+#18840=VERTEX_POINT('',#18841);+#18841=CARTESIAN_POINT('',(-7.2,-1.89,0.75));+#18842=LINE('',#18843,#8602);+#18843=CARTESIAN_POINT('',(-6.85,-1.89,0.75));+#18844=ORIENTED_EDGE('',*,*,#8837,.T.);+#18845=ORIENTED_EDGE('',*,*,#18846,.T.);+#18846=EDGE_CURVE('',#8834,#18847,#18849,.T.);+#18847=VERTEX_POINT('',#18848);+#18848=CARTESIAN_POINT('',(-7.2,-1.71,0.75));+#18849=LINE('',#18850,#8602);+#18850=CARTESIAN_POINT('',(-6.85,-1.71,0.75));+#18851=ORIENTED_EDGE('',*,*,#18852,.F.);+#18852=EDGE_CURVE('',#18840,#18847,#18853,.T.);+#18853=LINE('',#18841,#2066);+#18854=PLANE('',#18855);+#18855=AXIS2_PLACEMENT_3D('',#18843,#13,#8603);+#18856=ADVANCED_FACE('',(#18857),#2050,.F.);+#18857=FACE_BOUND('',#18858,.F.);+#18858=EDGE_LOOP('',(#18859,#18863,#18864,#18868));+#18859=ORIENTED_EDGE('',*,*,#18860,.F.);+#18860=EDGE_CURVE('',#8834,#9459,#18861,.T.);+#18861=LINE('',#18862,#2043);+#18862=CARTESIAN_POINT('',(-7.,-1.71,0.630119079428));+#18863=ORIENTED_EDGE('',*,*,#8833,.T.);+#18864=ORIENTED_EDGE('',*,*,#18865,.T.);+#18865=EDGE_CURVE('',#8830,#9473,#18866,.T.);+#18866=LINE('',#18867,#2043);+#18867=CARTESIAN_POINT('',(-7.,-1.49,0.630119079428));+#18868=ORIENTED_EDGE('',*,*,#9472,.F.);+#18869=ADVANCED_FACE('',(#18870),#18888,.F.);+#18870=FACE_BOUND('',#18871,.F.);+#18871=EDGE_LOOP('',(#18872,#18878,#18879,#18885));+#18872=ORIENTED_EDGE('',*,*,#18873,.F.);+#18873=EDGE_CURVE('',#8830,#18874,#18876,.T.);+#18874=VERTEX_POINT('',#18875);+#18875=CARTESIAN_POINT('',(-7.2,-1.49,0.75));+#18876=LINE('',#18877,#8602);+#18877=CARTESIAN_POINT('',(-6.85,-1.49,0.75));+#18878=ORIENTED_EDGE('',*,*,#8829,.T.);+#18879=ORIENTED_EDGE('',*,*,#18880,.T.);+#18880=EDGE_CURVE('',#8826,#18881,#18883,.T.);+#18881=VERTEX_POINT('',#18882);+#18882=CARTESIAN_POINT('',(-7.2,-1.31,0.75));+#18883=LINE('',#18884,#8602);+#18884=CARTESIAN_POINT('',(-6.85,-1.31,0.75));+#18885=ORIENTED_EDGE('',*,*,#18886,.F.);+#18886=EDGE_CURVE('',#18874,#18881,#18887,.T.);+#18887=LINE('',#18875,#2066);+#18888=PLANE('',#18889);+#18889=AXIS2_PLACEMENT_3D('',#18877,#13,#8603);+#18890=ADVANCED_FACE('',(#18891),#2050,.F.);+#18891=FACE_BOUND('',#18892,.F.);+#18892=EDGE_LOOP('',(#18893,#18897,#18898,#18902));+#18893=ORIENTED_EDGE('',*,*,#18894,.F.);+#18894=EDGE_CURVE('',#8826,#9494,#18895,.T.);+#18895=LINE('',#18896,#2043);+#18896=CARTESIAN_POINT('',(-7.,-1.31,0.630119079428));+#18897=ORIENTED_EDGE('',*,*,#8825,.T.);+#18898=ORIENTED_EDGE('',*,*,#18899,.T.);+#18899=EDGE_CURVE('',#8822,#9508,#18900,.T.);+#18900=LINE('',#18901,#2043);+#18901=CARTESIAN_POINT('',(-7.,-1.09,0.630119079428));+#18902=ORIENTED_EDGE('',*,*,#9507,.F.);+#18903=ADVANCED_FACE('',(#18904),#18922,.F.);+#18904=FACE_BOUND('',#18905,.F.);+#18905=EDGE_LOOP('',(#18906,#18912,#18913,#18919));+#18906=ORIENTED_EDGE('',*,*,#18907,.F.);+#18907=EDGE_CURVE('',#8822,#18908,#18910,.T.);+#18908=VERTEX_POINT('',#18909);+#18909=CARTESIAN_POINT('',(-7.2,-1.09,0.75));+#18910=LINE('',#18911,#8602);+#18911=CARTESIAN_POINT('',(-6.85,-1.09,0.75));+#18912=ORIENTED_EDGE('',*,*,#8821,.T.);+#18913=ORIENTED_EDGE('',*,*,#18914,.T.);+#18914=EDGE_CURVE('',#8818,#18915,#18917,.T.);+#18915=VERTEX_POINT('',#18916);+#18916=CARTESIAN_POINT('',(-7.2,-0.91,0.75));+#18917=LINE('',#18918,#8602);+#18918=CARTESIAN_POINT('',(-6.85,-0.91,0.75));+#18919=ORIENTED_EDGE('',*,*,#18920,.F.);+#18920=EDGE_CURVE('',#18908,#18915,#18921,.T.);+#18921=LINE('',#18909,#2066);+#18922=PLANE('',#18923);+#18923=AXIS2_PLACEMENT_3D('',#18911,#13,#8603);+#18924=ADVANCED_FACE('',(#18925),#2050,.F.);+#18925=FACE_BOUND('',#18926,.F.);+#18926=EDGE_LOOP('',(#18927,#18931,#18932,#18936));+#18927=ORIENTED_EDGE('',*,*,#18928,.F.);+#18928=EDGE_CURVE('',#8818,#9529,#18929,.T.);+#18929=LINE('',#18930,#2043);+#18930=CARTESIAN_POINT('',(-7.,-0.91,0.630119079428));+#18931=ORIENTED_EDGE('',*,*,#8817,.T.);+#18932=ORIENTED_EDGE('',*,*,#18933,.T.);+#18933=EDGE_CURVE('',#8814,#9543,#18934,.T.);+#18934=LINE('',#18935,#2043);+#18935=CARTESIAN_POINT('',(-7.,-0.69,0.630119079428));+#18936=ORIENTED_EDGE('',*,*,#9542,.F.);+#18937=ADVANCED_FACE('',(#18938),#18956,.F.);+#18938=FACE_BOUND('',#18939,.F.);+#18939=EDGE_LOOP('',(#18940,#18946,#18947,#18953));+#18940=ORIENTED_EDGE('',*,*,#18941,.F.);+#18941=EDGE_CURVE('',#8814,#18942,#18944,.T.);+#18942=VERTEX_POINT('',#18943);+#18943=CARTESIAN_POINT('',(-7.2,-0.69,0.75));+#18944=LINE('',#18945,#8602);+#18945=CARTESIAN_POINT('',(-6.85,-0.69,0.75));+#18946=ORIENTED_EDGE('',*,*,#8813,.T.);+#18947=ORIENTED_EDGE('',*,*,#18948,.T.);+#18948=EDGE_CURVE('',#8810,#18949,#18951,.T.);+#18949=VERTEX_POINT('',#18950);+#18950=CARTESIAN_POINT('',(-7.2,-0.51,0.75));+#18951=LINE('',#18952,#8602);+#18952=CARTESIAN_POINT('',(-6.85,-0.51,0.75));+#18953=ORIENTED_EDGE('',*,*,#18954,.F.);+#18954=EDGE_CURVE('',#18942,#18949,#18955,.T.);+#18955=LINE('',#18943,#2066);+#18956=PLANE('',#18957);+#18957=AXIS2_PLACEMENT_3D('',#18945,#13,#8603);+#18958=ADVANCED_FACE('',(#18959),#2050,.F.);+#18959=FACE_BOUND('',#18960,.F.);+#18960=EDGE_LOOP('',(#18961,#18965,#18966,#18970));+#18961=ORIENTED_EDGE('',*,*,#18962,.F.);+#18962=EDGE_CURVE('',#8810,#9564,#18963,.T.);+#18963=LINE('',#18964,#2043);+#18964=CARTESIAN_POINT('',(-7.,-0.51,0.630119079428));+#18965=ORIENTED_EDGE('',*,*,#8809,.T.);+#18966=ORIENTED_EDGE('',*,*,#18967,.T.);+#18967=EDGE_CURVE('',#8806,#9578,#18968,.T.);+#18968=LINE('',#18969,#2043);+#18969=CARTESIAN_POINT('',(-7.,-0.29,0.630119079428));+#18970=ORIENTED_EDGE('',*,*,#9577,.F.);+#18971=ADVANCED_FACE('',(#18972),#18990,.F.);+#18972=FACE_BOUND('',#18973,.F.);+#18973=EDGE_LOOP('',(#18974,#18980,#18981,#18987));+#18974=ORIENTED_EDGE('',*,*,#18975,.F.);+#18975=EDGE_CURVE('',#8806,#18976,#18978,.T.);+#18976=VERTEX_POINT('',#18977);+#18977=CARTESIAN_POINT('',(-7.2,-0.29,0.75));+#18978=LINE('',#18979,#8602);+#18979=CARTESIAN_POINT('',(-6.85,-0.29,0.75));+#18980=ORIENTED_EDGE('',*,*,#8805,.T.);+#18981=ORIENTED_EDGE('',*,*,#18982,.T.);+#18982=EDGE_CURVE('',#8802,#18983,#18985,.T.);+#18983=VERTEX_POINT('',#18984);+#18984=CARTESIAN_POINT('',(-7.2,-0.11,0.75));+#18985=LINE('',#18986,#8602);+#18986=CARTESIAN_POINT('',(-6.85,-0.11,0.75));+#18987=ORIENTED_EDGE('',*,*,#18988,.F.);+#18988=EDGE_CURVE('',#18976,#18983,#18989,.T.);+#18989=LINE('',#18977,#2066);+#18990=PLANE('',#18991);+#18991=AXIS2_PLACEMENT_3D('',#18979,#13,#8603);+#18992=ADVANCED_FACE('',(#18993),#2050,.F.);+#18993=FACE_BOUND('',#18994,.F.);+#18994=EDGE_LOOP('',(#18995,#18999,#19000,#19004));+#18995=ORIENTED_EDGE('',*,*,#18996,.F.);+#18996=EDGE_CURVE('',#8802,#9599,#18997,.T.);+#18997=LINE('',#18998,#2043);+#18998=CARTESIAN_POINT('',(-7.,-0.11,0.630119079428));+#18999=ORIENTED_EDGE('',*,*,#8801,.T.);+#19000=ORIENTED_EDGE('',*,*,#19001,.T.);+#19001=EDGE_CURVE('',#8798,#9613,#19002,.T.);+#19002=LINE('',#19003,#2043);+#19003=CARTESIAN_POINT('',(-7.,0.11,0.630119079428));+#19004=ORIENTED_EDGE('',*,*,#9612,.F.);+#19005=ADVANCED_FACE('',(#19006),#19024,.F.);+#19006=FACE_BOUND('',#19007,.F.);+#19007=EDGE_LOOP('',(#19008,#19014,#19015,#19021));+#19008=ORIENTED_EDGE('',*,*,#19009,.F.);+#19009=EDGE_CURVE('',#8798,#19010,#19012,.T.);+#19010=VERTEX_POINT('',#19011);+#19011=CARTESIAN_POINT('',(-7.2,0.11,0.75));+#19012=LINE('',#19013,#8602);+#19013=CARTESIAN_POINT('',(-6.85,0.11,0.75));+#19014=ORIENTED_EDGE('',*,*,#8797,.T.);+#19015=ORIENTED_EDGE('',*,*,#19016,.T.);+#19016=EDGE_CURVE('',#8794,#19017,#19019,.T.);+#19017=VERTEX_POINT('',#19018);+#19018=CARTESIAN_POINT('',(-7.2,0.29,0.75));+#19019=LINE('',#19020,#8602);+#19020=CARTESIAN_POINT('',(-6.85,0.29,0.75));+#19021=ORIENTED_EDGE('',*,*,#19022,.F.);+#19022=EDGE_CURVE('',#19010,#19017,#19023,.T.);+#19023=LINE('',#19011,#2066);+#19024=PLANE('',#19025);+#19025=AXIS2_PLACEMENT_3D('',#19013,#13,#8603);+#19026=ADVANCED_FACE('',(#19027),#2050,.F.);+#19027=FACE_BOUND('',#19028,.F.);+#19028=EDGE_LOOP('',(#19029,#19033,#19034,#19038));+#19029=ORIENTED_EDGE('',*,*,#19030,.F.);+#19030=EDGE_CURVE('',#8794,#9634,#19031,.T.);+#19031=LINE('',#19032,#2043);+#19032=CARTESIAN_POINT('',(-7.,0.29,0.630119079428));+#19033=ORIENTED_EDGE('',*,*,#8793,.T.);+#19034=ORIENTED_EDGE('',*,*,#19035,.T.);+#19035=EDGE_CURVE('',#8790,#9648,#19036,.T.);+#19036=LINE('',#19037,#2043);+#19037=CARTESIAN_POINT('',(-7.,0.51,0.630119079428));+#19038=ORIENTED_EDGE('',*,*,#9647,.F.);+#19039=ADVANCED_FACE('',(#19040),#19058,.F.);+#19040=FACE_BOUND('',#19041,.F.);+#19041=EDGE_LOOP('',(#19042,#19048,#19049,#19055));+#19042=ORIENTED_EDGE('',*,*,#19043,.F.);+#19043=EDGE_CURVE('',#8790,#19044,#19046,.T.);+#19044=VERTEX_POINT('',#19045);+#19045=CARTESIAN_POINT('',(-7.2,0.51,0.75));+#19046=LINE('',#19047,#8602);+#19047=CARTESIAN_POINT('',(-6.85,0.51,0.75));+#19048=ORIENTED_EDGE('',*,*,#8789,.T.);+#19049=ORIENTED_EDGE('',*,*,#19050,.T.);+#19050=EDGE_CURVE('',#8786,#19051,#19053,.T.);+#19051=VERTEX_POINT('',#19052);+#19052=CARTESIAN_POINT('',(-7.2,0.69,0.75));+#19053=LINE('',#19054,#8602);+#19054=CARTESIAN_POINT('',(-6.85,0.69,0.75));+#19055=ORIENTED_EDGE('',*,*,#19056,.F.);+#19056=EDGE_CURVE('',#19044,#19051,#19057,.T.);+#19057=LINE('',#19045,#2066);+#19058=PLANE('',#19059);+#19059=AXIS2_PLACEMENT_3D('',#19047,#13,#8603);+#19060=ADVANCED_FACE('',(#19061),#2050,.F.);+#19061=FACE_BOUND('',#19062,.F.);+#19062=EDGE_LOOP('',(#19063,#19067,#19068,#19072));+#19063=ORIENTED_EDGE('',*,*,#19064,.F.);+#19064=EDGE_CURVE('',#8786,#9669,#19065,.T.);+#19065=LINE('',#19066,#2043);+#19066=CARTESIAN_POINT('',(-7.,0.69,0.630119079428));+#19067=ORIENTED_EDGE('',*,*,#8785,.T.);+#19068=ORIENTED_EDGE('',*,*,#19069,.T.);+#19069=EDGE_CURVE('',#8782,#9683,#19070,.T.);+#19070=LINE('',#19071,#2043);+#19071=CARTESIAN_POINT('',(-7.,0.91,0.630119079428));+#19072=ORIENTED_EDGE('',*,*,#9682,.F.);+#19073=ADVANCED_FACE('',(#19074),#19092,.F.);+#19074=FACE_BOUND('',#19075,.F.);+#19075=EDGE_LOOP('',(#19076,#19082,#19083,#19089));+#19076=ORIENTED_EDGE('',*,*,#19077,.F.);+#19077=EDGE_CURVE('',#8782,#19078,#19080,.T.);+#19078=VERTEX_POINT('',#19079);+#19079=CARTESIAN_POINT('',(-7.2,0.91,0.75));+#19080=LINE('',#19081,#8602);+#19081=CARTESIAN_POINT('',(-6.85,0.91,0.75));+#19082=ORIENTED_EDGE('',*,*,#8781,.T.);+#19083=ORIENTED_EDGE('',*,*,#19084,.T.);+#19084=EDGE_CURVE('',#8778,#19085,#19087,.T.);+#19085=VERTEX_POINT('',#19086);+#19086=CARTESIAN_POINT('',(-7.2,1.09,0.75));+#19087=LINE('',#19088,#8602);+#19088=CARTESIAN_POINT('',(-6.85,1.09,0.75));+#19089=ORIENTED_EDGE('',*,*,#19090,.F.);+#19090=EDGE_CURVE('',#19078,#19085,#19091,.T.);+#19091=LINE('',#19079,#2066);+#19092=PLANE('',#19093);+#19093=AXIS2_PLACEMENT_3D('',#19081,#13,#8603);+#19094=ADVANCED_FACE('',(#19095),#2050,.F.);+#19095=FACE_BOUND('',#19096,.F.);+#19096=EDGE_LOOP('',(#19097,#19101,#19102,#19106));+#19097=ORIENTED_EDGE('',*,*,#19098,.F.);+#19098=EDGE_CURVE('',#8778,#9704,#19099,.T.);+#19099=LINE('',#19100,#2043);+#19100=CARTESIAN_POINT('',(-7.,1.09,0.630119079428));+#19101=ORIENTED_EDGE('',*,*,#8777,.T.);+#19102=ORIENTED_EDGE('',*,*,#19103,.T.);+#19103=EDGE_CURVE('',#8774,#9718,#19104,.T.);+#19104=LINE('',#19105,#2043);+#19105=CARTESIAN_POINT('',(-7.,1.31,0.630119079428));+#19106=ORIENTED_EDGE('',*,*,#9717,.F.);+#19107=ADVANCED_FACE('',(#19108),#19126,.F.);+#19108=FACE_BOUND('',#19109,.F.);+#19109=EDGE_LOOP('',(#19110,#19116,#19117,#19123));+#19110=ORIENTED_EDGE('',*,*,#19111,.F.);+#19111=EDGE_CURVE('',#8774,#19112,#19114,.T.);+#19112=VERTEX_POINT('',#19113);